This document provides an overview of thermoforming and other plastic processing techniques. It discusses the history and development of thermoforming from World War II to today. It then describes different types of thermoforming like vacuum, pressure, and mechanical thermoforming. The document also discusses extrusion, injection molding, and blow molding processes. It provides details on the history, process, materials used, advantages and disadvantages, and applications of each technique. Finally, it mentions some Pakistani industries that utilize these plastic processing methods.
this is my prsentation of Plastic Process and Processing Parameter in manufacturing process. here discussed moulding process for plastic, plastic injection moulding, machine parts and procedure, material used to making mould and blow moulding process, thermoforming process, vacuum forming process, and application
Blow Molding is defined appropriately and also the process compatible materials are listed. Blow Molding is broadly classified as - extrusion type, injection type, Multilayer type. All three processes are explained appropriately with diagrams and their application is also listed. Since every thing has advantages and disadvantages, so is the case with blow molding. References are also cited correctly. I hope you all find it useful
Overview of the thermoforming molding technique, the two types of thermoforming, common uses, advantages and disadvantages. TranPak (800) 827-2474. http://www.tranpak.com
this is my prsentation of Plastic Process and Processing Parameter in manufacturing process. here discussed moulding process for plastic, plastic injection moulding, machine parts and procedure, material used to making mould and blow moulding process, thermoforming process, vacuum forming process, and application
Blow Molding is defined appropriately and also the process compatible materials are listed. Blow Molding is broadly classified as - extrusion type, injection type, Multilayer type. All three processes are explained appropriately with diagrams and their application is also listed. Since every thing has advantages and disadvantages, so is the case with blow molding. References are also cited correctly. I hope you all find it useful
Overview of the thermoforming molding technique, the two types of thermoforming, common uses, advantages and disadvantages. TranPak (800) 827-2474. http://www.tranpak.com
Thermoforming 101: From Turtle Shells to Clamshellsplasticingenuity
This infographic by Plastic Ingenuity takes a look into thermoforming, a process that turns raw plastics into the packages and containers that we rely on every day.
www.plasticingenuity.com
PLASTIC MOULDING and Methods involving in itGaurav Tyagi
plastic moulding a topic with some less knowledges
but surely help out the masters as well as unger graduates in their assignments
no need to modify just go through it and take some innovative ideas and some will be making some more better ones
but for those who are in a hurry and want to minimise their time or wants to save their time its a copmlete package just go through it
This type of moulding is helpful to make containers ,jars ,water bottles and many more so please kindly go through this process .With the help of this type of moulding we can perform our experiment of our daily used water cans e.g: 5ltrs ,10ltrs ,20ltrs ,25ltrs ect.
Blow Mould Tool Design and Manufacturing Process for 1litre Pet BottleIOSR Journals
the concepts of Blow molding is a process used to produce hollow objects from thermoplastic. The
basic blow molding process has two fundamental phases. First, a parson (or a perform) of hot plastic resin in a
somewhat tubular shape is created. Second, compressed air is used to expand the hot perform and press it
against mould cavities. The pressure is held until the plastic cools. Blow molding process is used for which has
thin wall sections.In this thesis, blow mould design is to be done for a bottle having 0.5mm thickness. This
thickness cannot be filled in pressure injection molding. So blow molding is considered for pet bottle design.
The mould is prepared by first modeling the part, extracting core & cavity and generating CNC program. Blow
mould tool design is done in Pro/Engineer according to HASCO standards. A prototype of the pet bottle using
blow mould design is also included.
Fabrication of Plastics in polymer technology for B.Tech students in India specially for JNTU K,H&A in Andhra Pradesh Telangana and also for other Indian Universities.
By
Gurram.Achyuth Kumar
A
Lecture notes on Structure and Properties of Engineering Polymers
Course Objectives:
The main objective is to introduce polymers as an engineering material and emphasize the basic concepts of their nature, production and properties. Polymers are introduced at three levels; namely, the molecular level, the micro level, and macro-level. Through knowledge of all three levels, student can understand and predict the properties of various polymers and their performance in different products. The course also aims at introducing the students to the principles of polymer processing techniques and considerations of design using engineering polymers.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
Model Attribute Check Company Auto PropertyCeline George
In Odoo, the multi-company feature allows you to manage multiple companies within a single Odoo database instance. Each company can have its own configurations while still sharing common resources such as products, customers, and suppliers.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
2024.06.01 Introducing a competency framework for languag learning materials ...
Thermoforming
1. Group No 07
HISTORY
World War II
Development of Thermoplastics, windshields
1950’s
High volume production and products of
thermoplastics.
Development of blister packaging
Food packaging divisions
1980’s
Flexibility in size of containers use by the machine
Today
In addition to packaging, used for refrigerator liners,
shower stalls, bath tubs, automotive trunk liners and
more
2. What is Thermoforming?
Thermoforming is the process
involving heating a plastic sheet and
forming it into a cavity or over a tool
using vacuum, air pressure, and
mechanical means.
3. The Mold
O Two major types: Male
and Female
O Male molds have the
convex (inner) side against
the mold; the concave
side is against the mold
face in female molds.
O Mold type should be
chosen so that the
important side
contacts the mold.
O Off side is harder
to control shape.
4. TYPES OF THERMOFORMING
O Vacuum Thermoforming
O Pressure Thermoforming
O Mechanical Thermoforming
5. Vacuum Thermoforming
O The process involves shaping a preheated
thermoplastic sheet by means of vacuum
produced in the mold cavity space.
O The atmospheric pressure forces the soft
sheet to deform in conformity with the
cavity shape.
O When the plastic comes into the contact
with the mold surface it cools down and
hardens.
6.
7. Pressure Thermoforming:-
O The process involves shaping a preheated
thermoplastic sheet by means of air
pressure.
O The air pressure forces the soft sheet to
deform in conformity with the cavity
shape.
O When the plastic comes into the contact
with the mold surface it cools down and
hardens.
8. Mechanical Thermoforming:-
O The process involves shaping a preheated
thermoplastic sheet by means of a direct
mechanical force.
O A core plug (positive mold) forces the soft
sheet to fill the space between the plug
and the negative mold.
O The process provides precise dimensional
tolerance and surface detailing.
9. Thermoplastics which may be
processed by the thermoforming
method are:O Polypropylene (PP)
O Polystyrene (PS)
O Polyvinyl Chloride (PVC)
O Low Density Polyethylene (LDPE)
O High Density Polyethylene (HDPE)
O Cellulose Acetate
O Polymethylmethacrylate (PMMA)
O Acrylonitrile-Butadiene-Styrene (ABS)
10. Advantages
They are light in weight and durable.
They reduce per unit packaging cost of the product.
Thermoforming can be recycled thus technology is
environment friendly
The plastic used for packaging is stiffer than the average
plastic. This gives the products a high quality packaging.
The transportation costs are reduced as the packaging
does not add to the total weight of the product.
Low Temperature required
Low pressure required
Fast mold cycle
11. Disadvantages
Limited shape complexity.
Trimming is required .
Parts with sharp bends and corners are difficult
to be produced.
Generates greater amount of scrap.
Internal stresses are produced.
12. COMPARISION
PRESSURE FORMING VACUUM FORMING
O Mold cycle is fast.
O Sheet can be formed at
lower temperature
because the forcing
pressure is high.
O Greater dimensional
control.
O Mold cycle is slow.
O Sheet can be
formed at
comparatively high
temperature.
O Dimensional
control is less.
13. WHAT IS EXTRUSION…???
Extrusion is a process used to create
objects of a fixed cross-sectional profile.
A material is pushed or drawn through a
die of the desired cross-section.
14. HISTORY
O In 1797, Joseph Bramah introduce the first
extrusion process for making lead pipe. It
involved preheating the metal and then
forcing it through a die via a hand driven
plunger. The process wasn't developed
until 1820 when Thomas Burr constructed
the first hydraulic powered press. At this
time the process was called squirting. In
1894, Alexander Dick expanded the
extrusion process to copper and brass
alloys.
15. PROCESS:
The process begins by heating the stock
material. It is then loaded into the
container in the press. A dummy block is
placed behind it where the ram then
presses on the material to push it out of
the die. If better properties are required
then it may be heat treated or cold
worked.
16. HOT EXTRUSION:
Hot extrusion is a hot working process, which
means it is done above recrystallization
temperature to keep the material from work
hardening and to make it easier to push the
material through the die. Most hot extrusions
are done on horizontal hydraulic presses.
17. COLD EXTRUSION:
Cold extrusion is done at room temperature or
near room temperature. The advantages of this
over hot extrusion are the lack of oxidation,
higher strength due to cold working, closer
tolerances, good surface finish.
18. WARM EXTRUSION:
Warm extrusion is done above room
temperature, but below the
recrystallization temperature of the
material. It is usually used to achieve the
proper balance of required forces,
ductility and final extrusion properties.
19. DIRECT & INDIRECT EXTRUSION:
O DIRECT EXTRUSION:
Direct extrusion also termed as
forward extrusion. If the die is held stationary and
the ram moves towards it then its called “direct
extrusion”.
O INDIRECT EXTRUSION:
Indirect Extrusion is also
termed as backward extrusion. Here the die is not
stationary and moves with respect to the ram.
20. HYDROSTATIC EXTRUSION:
In the hydrostatic extrusion process the
billet is completely surrounded by a
pressurized liquid, except where the
billet contacts the die. This process can
be done hot, warm, or cold, however the
temperature is limited by the stability of
the fluid used. The process must be
carried out in a sealed cylinder to contain
the hydrostatic medium.
21. EXTRUSION ADVANTAGES AND
DISADVANTAGES:
ADVANTAGES: DISADVANTA-GES:
O Continuous.
O High production
volumes.
O Low cost.
O Many types of raw
material.
O Surface cracking.
O Internal cracking.
O Uniform cross-
sectional shape
only.
22.
23. PREFERENCES:
O Low labour cost.
O High production rates.
O Cost efficient.
O No need of surface finish after
extrusion process.
O Minimum scrap losses.
26. HISTORY
O The first man-made plastic was invented in Britain in 1851
by Alexander Parkes. He publicly demonstrated it at the 1862
International Exhibition in London, calling the material he produced
“Parkesine”.
O In 1868, American inventor John Wesley Hyatt developed a plastic
material he named Celluloid, improving on Parkes' invention so that
it could be processed into finished form. Together with his brother
Isaiah, Hyatt patented the first injection molding machine in 1872.
O The industry expanded rapidly in the 1940s because World War
II created a huge demand for inexpensive, mass-produced products.
In 1946, American inventor James Watson Hendry built the first
screw injection machine, which allowed much more precise control
over the speed of injection and the quality of articles produced.
O The plastic injection molding industry has evolved over the years
from producing combs and buttons to producing a vast array of
products for many industries
including automotive, medical, aerospace, consumer products,
toys, plumbing, packaging, and construction.
27. INJECTION MOLDING
Injection molding is
a manufacturing process for producing
parts from
both thermoplastic and thermosetting plasti
c materials. In injection molding material is
fed into a heated barrel, mixed, and forced
into a mold cavity where it cools and
hardens to the configuration of the mold
cavity.
28.
29.
30. THERMO PLASTIC:
O A thermoplastic, also known as a
thermo softening plastic, is a
polymer that turns to a liquid
when heated and freezes to a very
glassy state when cooled
sufficiently. Nylon, polyethylene,
and polystyrene are examples
of thermoplastic.
31. THERMOSETTING PLASTIC:
A thermosetting plastic, also known as a
thermoset, is polymer material that
irreversibly cures. The cure may be done
through heat (generally above 200 C
(392 F)), through a chemical reaction
(two-part epoxy, for example), or
irradiation such as electron beam
processing. epoxy and phenolic are
examples of thermosetting plastics
32. APPLICATIONS:
Injection molding is used to create many
things such as wire spools, packaging,
bottle caps, automotive dashboards,
pocket combs, and most other plastic
products available today. Injection
molding is the most common method of
part manufacturing. It is ideal for
producing high volumes of the same
object.
33. COMPARISON B/W INJECTON
MOLDING AND OTHER PROCESS
INJECTION: BLOW:
O Mold remain sealed through
out the process
O In injection molding we keep
air pressure very low because
more air pressure can
diminish the product.
O The injection molding
process ends inside the mold
means the process ends after
the ejection of the mold.
O it employs a narrow nozzle
to coupled with the mold.
O In this process mold remain
split a part.
O In blow molding we force
more and more air into the
mold to expand the plastic to
the limits of the mold cavity.
In this process mold remain
spilt apart
O In blow molding process does
not end inside after the
ejection of the product some
more processes like air
blowing and trimming are
performed.
O It employs die head extrudes
a tube of molten plastic.
34.
35.
36. APPLICATION IN PAKISTAN
INDUSTRIES
O Siddiqi sons industries.
(Fan parts, Citrus press juicers,
Television parts)
O Arfeen international (pvt) ltd.
O Qismat plastic industry(spare parts of
washing machine, spare pats of fans).
O Universal Engg works(specialize in
plastic and metal products).
37. BLOW MOLDING
O It is a
manufacturing
process to made
hollow parts
such as plastic
bottles with
uniform wall
thicknesses.
38. HISTORY
O Enoch Ferngren and William Kopitke
were the first verified people who used
the Blow Molding Process. The process
principle comes from the idea of
blowing glass. Ferngren and Kopitke
produced a blow molding machine and
sold it to Hartford Empire Company in
1937. This was the beginning of the
commercial blow molding process.
39. PROCESS:
The blow molding process begins with
melting down the plastic and forming it
into a parison or preform. The parison is
a tube-like piece of plastic with a hole in
one end in which compressed air can
pass through. The parison is then
clamped into a mold and air is pumped
into it. The air pressure then pushes the
plastic out to match the mold. Once the
plastic has cooled and hardened the
mold opens up and the part is ejected.
40.
41.
42. EXTRUSION BLOW MOLDING:
O Extrusion Blow Molding is the
simplest type of blow molding. A
hot tube of plastic material is
dropped from an extruder and
captured in a water cooled mold.
Once the molds are closed, air is
injected through the top or the
neck of the container; just as if
one were blowing up a balloon.
When the hot plastic material is
blown up and touches the walls
of the mold the material
"freezes" and the container now
maintains its rigid shape.
43. INJECTION BLOW MOLDING:
O Injection blow molding is a
process used to make hollow
products, such as drinks bottles, in
large quantities.
O The process is divided in to three
stages,
O injection, blowing and ejection.
44.
45.
46. STRETCH BLOW MOLDING
O Stretch blow molding is best known
for producing PET bottles
commonly used for water, juice and
a variety of other products. the
plastic is first molded into a
"preform" . These preforms are
produced with the necks of the
bottles, including threads on one
end. Then these pre-forms are send
to molds . And there these pre-
forms are blown in the shape of
final product.
47.
48.
49. APPLICATION IN PAKISTAN
INDUSTRIES
O Tabraiz mold engineering Lahore
Pakistan. ( products: pet blow mold,
machine parts, labeling parts)
O Thermosole industries (pvt) ltd.
Kotlakhpat. (covering 90% of blow
molding automotive market in
Pakistan)
O Kalson engineering in Lahore.
(services in mold making)