The main purpose of resources allocation is to rearrange the activities of network in such a manner that the project can be completed with available resources, with minimum increase in cost and without delaying the completion period.
RESOURCE SMOOTHING Done – shifting of activities by their available floats, so that a uniform demand for the resources are generated.
Project Time – not change in any case
Project scheduling and resource levelling_Construction Management A Makwana
At the time of preparing the network of any project, usually it is assumed that all resources needed for its execution are available in plenty and no consideration of resource constraints is taken into account.
In such situations the duration of the project may increase escalating the cost of the project.
03 Construction Project Planning and Schedulingakashpadole
The presentation has prepared as per the syllabus of Mumbai University.
Go through the presentation, if you like it then share it with your friends and classmates.
Thank you :)
Project scheduling and resource levelling_Construction Management A Makwana
At the time of preparing the network of any project, usually it is assumed that all resources needed for its execution are available in plenty and no consideration of resource constraints is taken into account.
In such situations the duration of the project may increase escalating the cost of the project.
03 Construction Project Planning and Schedulingakashpadole
The presentation has prepared as per the syllabus of Mumbai University.
Go through the presentation, if you like it then share it with your friends and classmates.
Thank you :)
CONSTRUCTION PROJECT PLANING
WHAT IS CONSTRUCTION PLANNING
5 STEPS TO THE PERFECT CONSTRUCTION PLANNING PROCESS
PRE TENDER PLANNING
PRE CONTRACT PLANNING
ROLE OF CLIENT
ROLE OF CONTRACTOR
PROCESS OF DEVELOPMENT OF PLANS
PLANNING A PROJECT
INTRODUCTION TO SCHEDULING
WORK BREAKDOWN STRUCTURE
BAR CHARTS (GANTT CHARTS)
NETWORK TECHNIQUES
ACTIVITY-ON-ARROW NETWORK
DUMMY ACTIVITIES
DANGLING ACTIVITY
CYCLE IN NETWORK
PRECEDENCE NETWORKS
TIME ESTIMATES
MILESTONES IN PROJECT
TIME ANALYSIS
CRITICAL PATH, SLACK AND FLOAT
NETWORK ANALYSIS AND BAR CHART
WHAT IS NETWORK
PERT / CPM Techniques
TERMS USED IN A NETWORK
RULES OF NETWORK CONSTRUCTION
NETWORK SYMBOLS
Construction Project Management is an important subject to learn in Civil Engineering.
Significance • As construction involves various activities starting from the design and planning to project completion and quality check, there is a exorbitant need for Management of construction. • Construction Industry plays a crucial role in the economy and development of a nation.
4. Objectives To complete the project in specified time and with allocated budget. To Plan and schedule the work and distribute between various departments. Deployment of personnel in Different tasks. To achieve High quality workmanship. Creating an organisation that works as a team. Using the limited available resources and producing maximum output. Providing safe and satisfactory working conditions for all personnel and workers.
5. Functions: Planning & Scheduling Organizing Staffing Directing Controlling & Co-ordinating
6. Stages of construction Briefing Designing Tendering Construction Commissioning
7. 1) Briefing Stage • This stage consists of framework required for the construction work to take a shape from the ideology of client and feasibility of Project which involves architects, engineers and project manager.
Objectives Developing Alternatives Feasible Solution ? Evaluation of Alternatives Report & Recommendation Technical and non technical Investigations
8. 2) Designing or planning Stage Prepare construction schedule Prepare final cost estimate Prepare Working Drawings and specificati ons Prepare scheme and detailed designs Soil investigations, Topographic investigation, material supply and market surveys etc Carry out Technical Investigations Final adoption of the most suitable summary Finalize Project Summary
WHAT DOES CONSTRUCTION PROJECT MANAGEMENT (CPM) MEAN?
THE UNIQUE FEATURES OF CONSTRUCTION IN INDIA
THE DIFFERENT TYPES OF CONSTRUCTION PROJECTS
FEATURES OF A CONSTRUCTION PROJECT
PHASES OF PROJECT
AGENCIES INVOLVED AND THEIR METHODS OF EXECUTION
for the subject offered in GTU in the final year (8th semester), construction management
final year
Module:- 5 project scheduling and resource leveling
Construction Scheduling, Work Study and Work Measurement _ Unit 2 _ Construct...Shrikant Kate
Construction Scheduling, Work Study and Work Measurement _ Unit 2 _ Construction Management _ Final Year (BE) _ Department of Civil Engineering _ TAE _ SPPU _ by Shrikant R. Kate
Construction scheduling, work study and work measurement Construction scheduling.
Construction project scheduling – purpose, factors affecting scheduling, time as a control tool
Work Breakdown Structure, project work breakdown levels, line of balance technique
Repetitive project management Work study and work measurement
Definition, objectives, basic procedure of work study, symbols, activity charts, string diagrams, time and motion studies.
Now-a-days whole world facing competition in every fields, including construction industry. Large construction companies carry out big projects, according to the need of that project, they uses different methods of construction and management. Critical Path Method (CPM), Linear Scheduling Method (LSM), and Line Of Balance (LOB) are the different methods of construction project management. All the construction companies utilize these methods according their utilities and requirement of project. In this report, Line of balance method is explained with its different component on the basis of some related works discussed different alternatives and strategies to sequence activities in the long run. This report contains a study carried out in a construction company in which LOB concept is used in the initial planning phase of a high-rise residential project. Based on the information provided by different LOBs, representing different scenarios, It is further discussed with projects managers, superintendents, and crews the advantages and disadvantages of each scenario regarding the project’s lead time, activities cycle time, gang sizes, batch sizes, buffers, sequencing and interferences between activities .
Construction planning_Construction Management (2180611) (Semester-8), Civil E...A Makwana
Planning can be defined as drawing up a method of acting, doing, proceeding.
It is thinking ahead of the activities to be performed.
In planning one is foresee and anticipate about the events which are likely to delay the attainment of stated goal.
CONSTRUCTION PROJECT PLANING
WHAT IS CONSTRUCTION PLANNING
5 STEPS TO THE PERFECT CONSTRUCTION PLANNING PROCESS
PRE TENDER PLANNING
PRE CONTRACT PLANNING
ROLE OF CLIENT
ROLE OF CONTRACTOR
PROCESS OF DEVELOPMENT OF PLANS
PLANNING A PROJECT
INTRODUCTION TO SCHEDULING
WORK BREAKDOWN STRUCTURE
BAR CHARTS (GANTT CHARTS)
NETWORK TECHNIQUES
ACTIVITY-ON-ARROW NETWORK
DUMMY ACTIVITIES
DANGLING ACTIVITY
CYCLE IN NETWORK
PRECEDENCE NETWORKS
TIME ESTIMATES
MILESTONES IN PROJECT
TIME ANALYSIS
CRITICAL PATH, SLACK AND FLOAT
NETWORK ANALYSIS AND BAR CHART
WHAT IS NETWORK
PERT / CPM Techniques
TERMS USED IN A NETWORK
RULES OF NETWORK CONSTRUCTION
NETWORK SYMBOLS
Construction Project Management is an important subject to learn in Civil Engineering.
Significance • As construction involves various activities starting from the design and planning to project completion and quality check, there is a exorbitant need for Management of construction. • Construction Industry plays a crucial role in the economy and development of a nation.
4. Objectives To complete the project in specified time and with allocated budget. To Plan and schedule the work and distribute between various departments. Deployment of personnel in Different tasks. To achieve High quality workmanship. Creating an organisation that works as a team. Using the limited available resources and producing maximum output. Providing safe and satisfactory working conditions for all personnel and workers.
5. Functions: Planning & Scheduling Organizing Staffing Directing Controlling & Co-ordinating
6. Stages of construction Briefing Designing Tendering Construction Commissioning
7. 1) Briefing Stage • This stage consists of framework required for the construction work to take a shape from the ideology of client and feasibility of Project which involves architects, engineers and project manager.
Objectives Developing Alternatives Feasible Solution ? Evaluation of Alternatives Report & Recommendation Technical and non technical Investigations
8. 2) Designing or planning Stage Prepare construction schedule Prepare final cost estimate Prepare Working Drawings and specificati ons Prepare scheme and detailed designs Soil investigations, Topographic investigation, material supply and market surveys etc Carry out Technical Investigations Final adoption of the most suitable summary Finalize Project Summary
WHAT DOES CONSTRUCTION PROJECT MANAGEMENT (CPM) MEAN?
THE UNIQUE FEATURES OF CONSTRUCTION IN INDIA
THE DIFFERENT TYPES OF CONSTRUCTION PROJECTS
FEATURES OF A CONSTRUCTION PROJECT
PHASES OF PROJECT
AGENCIES INVOLVED AND THEIR METHODS OF EXECUTION
for the subject offered in GTU in the final year (8th semester), construction management
final year
Module:- 5 project scheduling and resource leveling
Construction Scheduling, Work Study and Work Measurement _ Unit 2 _ Construct...Shrikant Kate
Construction Scheduling, Work Study and Work Measurement _ Unit 2 _ Construction Management _ Final Year (BE) _ Department of Civil Engineering _ TAE _ SPPU _ by Shrikant R. Kate
Construction scheduling, work study and work measurement Construction scheduling.
Construction project scheduling – purpose, factors affecting scheduling, time as a control tool
Work Breakdown Structure, project work breakdown levels, line of balance technique
Repetitive project management Work study and work measurement
Definition, objectives, basic procedure of work study, symbols, activity charts, string diagrams, time and motion studies.
Now-a-days whole world facing competition in every fields, including construction industry. Large construction companies carry out big projects, according to the need of that project, they uses different methods of construction and management. Critical Path Method (CPM), Linear Scheduling Method (LSM), and Line Of Balance (LOB) are the different methods of construction project management. All the construction companies utilize these methods according their utilities and requirement of project. In this report, Line of balance method is explained with its different component on the basis of some related works discussed different alternatives and strategies to sequence activities in the long run. This report contains a study carried out in a construction company in which LOB concept is used in the initial planning phase of a high-rise residential project. Based on the information provided by different LOBs, representing different scenarios, It is further discussed with projects managers, superintendents, and crews the advantages and disadvantages of each scenario regarding the project’s lead time, activities cycle time, gang sizes, batch sizes, buffers, sequencing and interferences between activities .
Construction planning_Construction Management (2180611) (Semester-8), Civil E...A Makwana
Planning can be defined as drawing up a method of acting, doing, proceeding.
It is thinking ahead of the activities to be performed.
In planning one is foresee and anticipate about the events which are likely to delay the attainment of stated goal.
Project Cost Management, key processes involved and understanding resource planning in detail, its input, tools and techniques, output in the resource planning process
Project
A Project is defined as a temporary endeavour undertaken to create a unique product/service/results.
Product
The product in case of a construction project is the constructed facility such as a building, a bridge, a highway, a dam, a canal, a factory etc.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Attributes affecting success of the residential projects – a reviewA Makwana
Construction industry is complex in nature and construction projects in India face many challenges and complex issues, such as time, cost, safety, quality and stakeholder satisfaction. According to Construction scenario there are various factors that affecting the residential project. These review paper shows the selection of criteria based on by giving the importance to other researcher’s research. The criteria were curtailed down according to literature review studied in this paper, interaction with stakeholder which are Engineers, Project managers, Architects, Consultants, Developers and educational experts, of Surat and Vadodara city in Gujarat.
A Review on Thin-shell Structures: Advances and TrendsA Makwana
This paper provides a review of research advances and trends in the area of thin shell structures. The art of building thin-shell structures has been with us since ancient times. In practical civil engineering, the necessity of covering large column free open areas with shell surfaces is often an issue. Over the course of time, this shell form became very popular to engineers due to a number of advantages it offers, and started drawing the attention of a number of researchers. A thin shell is a term not in itself as readily understandable by the layman as the terms dome or vault would be. It is in a sense a word coined on the basis of its structural connotations, as exhibited in the artifacts it creates. There are many interesting aspects of the use of shells in engineering, but one alone stands out as being of paramount importance: it is the structural aspect. At the beginning of this century, under the influence of the art movement and the dominance of industrialized building materials, any remnants of curvilinear architecture were mercilessly banished. Within that period avant-garde art emphatically proclaimed a total repudiation of the traditions and classical revivals that in architecture were symbolized mostly by arches and vaults. Ready-to-use rectilinear steel beams and columns and easy-to build rectilinear concrete forms struck a lethal blow to the curvilinear approach in architecture. Rectilinearity became synonymous with rationality, while curvilinearity came to symbolize decadence. Remember, for instance, the negative stigma given to the baroque for its assumed pomposity in glorifying curves. In practical terms such an attitude in design is clearly manifested in the present cityscapes that are totally free of arches, domes, shells, and any other form that is not rectilinear. With today‟s almost unlimited computer technology and the knowledge that can be gained from understanding the domes and vaults built both in the past and present, it is hoped that this research work on the review aspects of curvilinear forms will contribute to further exploration and encourage the application of thin shells by the engineers and architects to whom it is addressed. Masonry domes, concrete shells, and large steel contemporary domes are presented in historical terms as case studies and in conceptual terms from the architectural and structural point of view.
Soft Computing: Autoclaved Aerated Concrete Block using Chi-Square Test throu...A Makwana
Achieving an economy in Construction nowadays takes a lot of effort. Various researches are being made to improve the quality of Concrete block so that it can achieve high strength in low weight. One such product was invented known as an Autoclave Aerated Concrete (AAC) block. Autoclave Aerated Concrete (AAC) block is attributed with properties such as a load-bearing, lightweight, high-insulating, and durable. Autoclaved Aerated Concrete (AAC) block consists of basic materials that are widely available including Sand, Cement, Fly Ash, Lime, Gypsum, Aluminium Powder Paste, Water and an Expansion agent. The major volume in Autoclave Aerated Concrete (AAC) is covered by silica sand and it is one of the world’s most abundant natural resources. The finished product is up to five times the volume of the raw materials used, with an air content of 70% to 80% which makes them lightweight. The effort is made to fulfil the framed objective of this analytical research is to study, Engineer, Consultants and Trader’s perceptions towards the use of Autoclaved Aerated Concrete (AAC) block in construction projects and to analyse, the data collected as per questionnaire survey of targeted respondents study. This objective was achieved by a deriving conclusion about whether the AAC blocks are much better than clay bricks or not, by soft computing. The soft computing was done using one of the Statistical Packages for the Social Science (SPSS) method. i.e. Chi-square test. Required data for the study was collected through questionnaires that were distributed among the respondents who work at various construction projects. Mainly Engineers, Consultants, Traders and Contractors were selected as a respondent to getting efficient and reliable technical data. Result of the survey proved that the AAC block are better compare to the clay bricks.
Poster Presentation: An Integrated Approach for Enhancing Ready Mixed Concret...A Makwana
An Integrated Approach for Enhancing Ready Mixed Concrete utility using Analytic Hierarchy Process (AHP) and Technique for Order Preference by Similarity to Ideal Solution (TOPSIS)
FACTORS CONTRIBUTING TO THE RISING IMPORTANCE OF MODULAR CONSTRUCTION ADOPTIO...A Makwana
In recent times, the trend of modular construction adoption is increasing very fast due to
availability of latest tools and technology, efficient technical manpower and skilled labour
why mainly focus of this area is taken into
consideration through management approach with the help of Relative Importance Index
technique. Modular construction is one type of construction in which modular units are
produced in factory and then delivered to site and assembled as large volumetric
components. The modular units can be produced in any form; it may be service units such as
toilets, lifts, parts of rooms and complete rooms. The existing modular construction approach
is based on survey in Rajkot city. For survey work, Questionnaires is designed and distribute
to Consultants and Contractors. After data collection, rank has been given to the selected
factors of modular construction.
EXPANSION JOINT TREATMENT: MATERIAL & TECHNIQUESA Makwana
Although buildings are often constructed using flexible materials, roof and
structural expansion joints are required when plan dimensions are large. It is not possible to
state exact requirements relative to distances between expansion joints because of the many
variables involved, such as ambient temperatures during construction and the expected
temperature range during the life of a building. Expansion joints are periodic breaks in the
structure of the buildings. An expansion joint is a gap in the building structure provided by
an architect or engineer to allow for the movement of the building due to temperature
changes. An expansion joint is an assembly designed to safely absorb the heat-induced
expansion and contraction of various construction materials. They are commonly found
between sections of slabs, bridges, and other structures. The “assembly” can be as simple as
a caulked separation between two sections of the same materials. More recently, expansion
joints have been included in the design of, or added to existing, brick exterior walls for
similar purposes. In concrete and concrete block construction, the term applied is “control
joint,” but serves similar purposes. Throughout the year, building faces and concrete slabs
will expand and contract due to the warming and cooling of our planet through the seasons.
The structures would crack under the stress of thermal expansion and contraction if
expansion joint gaps were not built into the structures. Even today the expansion joint gaps
are often neglected during the design process, and simple caulking is used to fill these gaps
to complete a project. This simple caulking cannot handle the thermal expansion due to the
changing seasons, ultimately leaving a leak point in the structure. This expansion joint
becomes the main source of leakages in the structure which can ruin the interiors of the
building if not sealed or treated confidently. Waterproofing these joints often an overlooked
aspect of waterproofing design and detailing.
DEMOLITION OF BUILDINGS: INTEGRATED NOVEL APPROACHA Makwana
Every civil engineering structure is designed for a certain life period generally 100 years. After that the existence of a structure is very dangerous and unstable, which may cause a severe impact and be a cause of many deaths. So removal of such structures with proper safety measures has got great importance. Before any demolition of any type is employed in an area, it is vital that the rescue phase has ended completely. The rescue teams must have given clear information to the contractors that their rescue phase is finished in the selected area, since any demolition work carried out may reveal survivors. Such situations are highly sensitive and must be respected. A major disaster has an economic effect on the local region since the loss of buildings, lifelines and infrastructure results in a slump in the local economy. It is therefore important to boost the economy by employing as much local expertise and workforce as possible. This creates a unity in rehabilitation in the community and results in a more stable recovery. Due to this scenario, the demolition work should be carried out by a consortium, especially set up to do the work rather than commissioning the work to individual companies. This consortium must be set up in regions of high seismic risk to ensure rapid formation after a disaster. This will combat the eventual competitiveness of the large financial investors in the community which could result in a monopoly controlled by certain individuals. It would therefore be preferable to have a local demolition joint-venture to generate the needed local income after a disaster. There will, however, be a certain need for outside managerial and consultancy aid, especially in the developing countries, and this must be acknowledged and respected. The cooperation with the outside aid must be extensive and at a high level in conjunction with the local representatives so as to maintain as much of the local culture and style as possible. The outside consultants must be cautious when introducing major resources, such as machinery, into the post-disaster phases since this may be seen as taking work away from local resources.
ANTI-TERMITE TREATMENT: NEED OF CONSTRUCTION INDUSTRYA Makwana
Termites popularly known as white ants cause considerable damage to wood works,
furnishing etc. of buildings. The Latin name Isoptera means "equal wing" and refers to the
fact that the front set of wings on a reproductive termite is similar in size and shape to the hind
set. Termites are social and can form large nests or colonies, consisting of very different
looking individuals (castes). There are more than 2,500 different types of termites in the world.
In some country the loss caused due to termites is estimated to be as high as 10% of the capital
outlay of the building. Anti-termite treatment is therefore necessary so that damages are either
reduced or stopped together. Through regular inspections, a termite specialist can help
identify common hot spots for activity and warning signs for a termite infestation, plus share
tips to help keep termites at bay. Termites can fit through cracks as thin as an average business
card (1/32 inch) so proper maintenance is crucial to seal up any gaps around the foundation
and roof/eaves. To identify the termite and its uniqueness, the life cycle of termite is necessary
to understand. Anti- termites are used to combat the problem. There are combinations of
methods depending on what sort of damage is done by the termites. The treatment has to be
implemented at the time of construction for effective and permanent solution.
INTELLIGENT BUILDING NEW ERA OF TODAYS WORLDA Makwana
A building that uses both technology and process to create a facility that is safe,
healthy and comfortable and enables productivity and well-being of its occupants. With lots
of energy crisis in today‟s world now it‟s important for architects, engineers and construction
managers to make buildings which are energy efficient and intelligent by its functions and as
well as its usage, too. Technologies applied in intelligent buildings will improve the building
environment and functionality for occupants, while reducing operational costs. Smart or
clever buildings, perhaps focus on control systems, but intelligent buildings go far beyond
this. An intelligent building has an implicit logic that effectively evolves with changing user
requirements and technology, ensuring continued and improved intelligent operation,
maintenance and optimization. It exhibits key attributes of environmental sustainability to
benefit present and future generations. An intelligent building system concept recognizes that
the true cost of the building is not its cost of construction; it must include the operating and
maintenance costs over the structure‟s life span. Intelligent buildings yield cost reductions
over all these areas by optimizing energy use through automated control, communication and
management systems. They also guard against repair costs, employee time, productivity loss,
revenue loss and the loss of customers to competitors. Now a day, all heard of „sickbuilding‟
syndrome and the misery this can inflict in the workplace in terms of poor health
and lost production. The notion of the Intelligent Building is the modern civil engineer's Big
Idea in tackling these and other such deficiencies. The intelligent building can adapt itself to
maintain an optimized environment. An intelligent building must be smart enough to vary the
environment to suit the users and also to provide various means of communication or
network regardless of whether it is internal or external. At an even more fundamental level
intelligent buildings can cope with social and technological change and also are adaptable to
human needs. This paper provides a review of research era in the area of Intelligent Building
with case studies.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
3. RESOURCE ALLOCATION
• The various activities of the project are scheduled
in such a way that the requirement of various
resources is more or less uniform all along the
project duration.
• The main purpose of resources allocation is to
rearrange the activities of network in such a
manner that the project can be completed with
available resources, with minimum increase in cost
and without delaying the completion period.
Prof. Ashish Makwana 3
4. RESOURCE ALLOCATION:
PROCEDURE
1. Prepare - Network, Time duration, Critical path
2. Time scaled version of Network
3. Determined - Cumulative requirements of various
resources
4. Prepare – Histograms
5. Resource levelling – done by delaying some of the
non-critical activities
Prof. Ashish Makwana 4
5. RESOURCE LEVELLING
• Carry out when – (i) demand for a particular
resources exceeds its availability
• (ii) Requirement of Masons and Labours both,
because it is very difficult to arrange this much
persons on a day to day basis
• Done – by delaying some of the non-critical
activities which have float / adjusting the start time
of non-critical activities
• Activity adjustment – during process, max.
requirement does not exceed the limit of available
resources
Prof. Ashish Makwana 5
6. RESOURCE SMOOTHING
• Done – shifting of activities by their available floats,
so that a uniform demand for the resources are
generated.
• Project Time – not change in any case
Prof. Ashish Makwana 6
7. SCHEDULING
• Meaning – Process of preparing the work plan to a
time frame indicating the start and completion of
each activity
• Preparation – labour, material, machinery, money
• Useful – Actual progress of each activity compared
to planned programmes for corrective actions and
then speed up the work
Prof. Ashish Makwana 7
