This document provides an overview of nuclear physics concepts including:
- Mass defect and binding energy are explained using examples like helium-4 nucleus.
- Nuclear stability is determined by the balance of strong nuclear force and Coulombic repulsion.
- Nuclear fission and fusion are described along with examples like uranium-235.
- Radioactive decay is random and spontaneous in nature as demonstrated through a dice simulation example. The half-life concept is also introduced.
how to write electronic configuration of an atom
rules of filling electrons in energy levels
aufbau principle. hund's rule, Pauli's Exclusion principle
how to write electronic configuration of an atom
rules of filling electrons in energy levels
aufbau principle. hund's rule, Pauli's Exclusion principle
Lecture slides from a class introducing quantum mechanics to non-majors, giving an overview of black-body radiation, the photoelectric effect, and the Bohr model. Used as part of a course titled "A Brief history of Timekeeping," as a lead-in to talking about atomic clocks
Lecture slides from a class introducing quantum mechanics to non-majors, giving an overview of black-body radiation, the photoelectric effect, and the Bohr model. Used as part of a course titled "A Brief history of Timekeeping," as a lead-in to talking about atomic clocks
Nuclear physics is a branch of physics that focuses on the study of atomic nuclei and their interactions. It explores the properties and behavior of atomic nuclei, which are the central cores of atoms containing protons and neutrons. This field is crucial for understanding the fundamental forces that govern the behavior of matter at the atomic and subatomic levels.
Types Of nuclear reactions. Nuclear Fission Reaction. Nuclear Fusion Reaction. Difference between nuclear fusion and nuclear fusion. Light Element Fission. Light Element Fusion. Nuclear Fusion on Sun. Beta Decay process happening in sun. A short explanation of D–D reaction, D–He(3) reaction, D–T reaction. the outstanding problem is the tritium supply. Binding energy curve.Energy partition in process of fusion reactions. How then can light element fusion reactions be initiated? A major explanation for all these above steps. A complete explanation by Syed Hammad Ali Gillani.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
Ethnobotany and Ethnopharmacology:
Ethnobotany in herbal drug evaluation,
Impact of Ethnobotany in traditional medicine,
New development in herbals,
Bio-prospecting tools for drug discovery,
Role of Ethnopharmacology in drug evaluation,
Reverse Pharmacology.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
Wk 23 p5 wk 25-p2_26.3-26.4_particle and nuclear physics
1. Nuclear Physics
• 27. Nuclear Physics
• Content
• 27.1 The nucleus
• 27.2 Isotopes
• 27.3 Nuclear processes
• 27.4 Mass excess and nuclear binding energy
• 27.5 Radioactive decay
• Learning Outcomes
• (k) show an appreciation of the association between energy and mass as
represented by E = mc2 and recall and solve problems using this relationship.
• (l) sketch the variation of binding energy per nucleon with nucleon number.
• (m) explain the relevance of binding energy per nucleon to nuclear fusion and
to nuclear fission.
• (n) define the terms activity and decay constant and recall and solve problems
using A = λN.
• * (o) infer and sketch the exponential nature of radioactive decay and solve
problems using the relationship x = xoexp(–λt) where x could represent activity,
number of un-decayed particles or received count rate.
• (p) define half-life.
• (q) solve problems using the relation λ = 0.693/t½
1
2. Mass defect
• At the nuclear level, since the masses are very small, instead of measuring
them in kilogram, we measure the masses of nuclei and nucleons in atomic
mass unit
• One atomic mass unit (1 u) is defined as being equal to one-twelfth of the
mass of carbon-12 atom. 1 u is equal to 1.66 x 10-27 kg
• Using this scale we have:
proton mass mp = 1.007276 u
neutron mass mn = 1.008665 u
electron mass me = 0.000549 u
• e.g. the mass of a helium-4 nucleus which consists of 2 protons and 2
neutrons should be (2 x 1.007276) + (2 x 1.008665) = 4.031882 u
• However the actual mass of a helium nucleus is 4.001508 u, less by
0.030374 u
• This difference between the expected mass and the actual mass of a nucleus
is called the mass defect of the nucleus(i.e. mass of the product < the sum of
masses of reactants)
• Hence mass defect of a nucleus is the difference between the total mass of
the separate nucleons and the combined mass of the nucleus
2
3. Example
Calculate the mass defect for a carbon-14 nucleus. The measured mass is
14.003240 u.
Solution
The carbon-14 nucleus contains 6 protons and 8 neutrons,
Hence, total mass of separate nucleons is,
(6 x 1.007276) + (8 x 1.008665) = 14.112967 u
Given, combined mass is = 14.003240 u
Therefore the difference is the mass defect = 0.109736 u
3
4. Mass-energy equivalence principle
• In 1905 Albert Einstein proposed that there is a equivalence between mass
and energy, the relationship being
E = mc2
where c is the speed of light in metres per second , E is measured in joules
and m in kilograms
• In the example of the helium nucleus earlier, since the mass defect is
0.030374 u, converting u into kg and using the above Einstein’s equation,
the energy equivalent is 4.54 x 10-12 J
• This energy in Joules can be converted into eV which is a more convenient
energy unit by dividing by 1.6 x 10-19 J giving 28.4 MeV
• 1 u change in mass is the equivalent of 931 MeV
• The mass of object when it is at rest is called its rest mass
4
5. Binding energy
• Within the nucleus there are strong forces which bind the protons and
neutrons together, and to separate all these nucleons requires energy i.e.
work must be done, referred to as the binding energy of the nucleus(binding
means held together)(actually more appropriate to call it unbinding energy)
• Stable nuclei which have little or no tendency to disintegrate, have large
binding energies whereas less stable nuclei have smaller binding energies
• Similarly, to join together protons and neutrons together to form a nucleus,
this binding energy must be released. The binding energy is the equivalent
of the mass defect
• Referring again to the helium example earlier, since the energy equivalent of
the mass defect is 28.4 MeV which is the binding energy, 28.4 MeV of
energy is required to separate to infinity the 2 protons and 2 neutrons of
this nucleus
5
6. Example
Calculate the binding energy in MeV of a carbon-14 nucleus with a mass defect
of 0.109736 u.
Solution
Using the equivalence 1 u = 931 MeV,
0.109736 u = 102 MeV
Since the binding energy is the energy equivalent of the mass defect,
the binding energy = 102 MeV
6
7. Stability of nuclei
• Within the nucleus of an atom the nucleons experience 2 major forces of attraction
and repulsion
• The attractive force which is called the strong nuclear force acts like a glue to hold
the nucleons together and it is a short range force
• The repulsive forces are the electric forces between the positively charged protons
(Coulombic force), which is a long range force
• The strong force is strong enough to overcome the Coulombic repulsion between
protons otherwise the protons would fly apart
• Stability of a nucleus is determined by the equilibrium between these forces
• Stable nuclei have much larger attractive forces than repulsive forces
• Gravitational force of attraction also exist, but are negligible in comparison to the
other 2 forces
• A stable nucleus is one which has a very low probability of decay
• Stable nuclides generally have approximately the same number of protons to the
neutrons in the nucleus i.e. neutron-to-proton ratio is close to 1
• A useful measure of stability is the binding energy per nucleon which is defined as
the total energy needed to completely separate all the nucleons in a nucleus
divided by the number of nucleons in the nucleus
• The most stable nuclides are those with the highest binding energy per nucleon e.g.
iron
• Typically very stable nuclides have binding energies per nucleon of about 8 MeV
7
10. Example
The binding energy of a helium-4 nucleus is 28.4 MeV. Calculate the binding
energy per nucleon
Solution
The helium-4 nucleus has 4 nucleons.
The binding energy per nucleon is 28.4/4 = 7.1 MeV
10
11. Fusion and fission
• For a system to become stable, it tends to give out energy so that it has less
energy content.
e.g. chemical reaction : acid + base,
mechanical : horizontal cylinder is more stable than standing
cylinder
• Hence, a system also tends to be more stable if it has less mass. This is
demonstrated in nuclear reactions.
• Light nuclei may combine or fuse to form larger nuclei with larger binding
energies per nucleon in a process called nuclear fusion
• For this process to take place conditions of very high temperature and
pressure are required, as in stars e.g. the Sun
• Heavy nuclei when bombarded with neutrons may break into 2 smaller
nuclei, again with larger binding energy per nucleon values in a process
called nuclear fission. Fission rarely happens spontaneously
• Whenever nuclear fusion or fission takes place, the nucleon numbers of the
nuclei involved change, a higher binding energy is achieved and this is
accompanied by an enormous release of energy 11
12. Nuclear fission
• Being uncharged, neutrons can penetrate the nucleus more easily, but the
problem is that they cannot be directed and controlled by electric and
magnetic fields
• In heavy nuclei such as uranium and plutonium there are far more neutrons
than protons, giving a neutron/proton ratio of more than 1
e.g. uranium-235 has 92 protons and 143 neutrons giving a neutron/proton
ratio of 1.55
• This leads to a much lower binding energy per nucleon compared with iron
• Any further increase in the number of neutrons in such nuclei is likely to
cause the nucleus to undergo nuclear fission
• Nuclear fission is the splitting of a heavy nucleus into 2 lighter nuclei of
approximately the same mass
• One element changing into another is called transmutation
• The energy released per atom by fission(about 200 MeV) is about 50 million
times greater than that per atom from a chemical reaction such as burning
12
13. Induced nuclear fission
• When nuclear fission is started by the capture of a neutron by say a uranium
nucleus, it is known as induced nuclear fission
• When a uranium-235 nucleus absorbs a neutron, it becomes unstable and
splits into 2 lighter more stable nuclei. Although other fission reactions are
possible, the most likely reaction is
235U92 + 1n0 141Ba56 + 92Kr36 +31n0 + energy
• If these released neutrons are absorbed by other uranium-235 nuclei, these
too may become unstable and undergo fission, thereby releasing even more
neutrons causing a chain reaction
• In such a case, the reaction continues uncontrolled and a great deal of
energy is released in a short time
• If the reaction is controlled so that the number of fissions per unit is
constant, the rate of release of energy can be controlled
• This is precisely what is done in a modern nuclear power station where
some of the neutrons released in the reactions are absorbed by control rods
13
14. Nuclear fission reactor
• There are several possible fission reactions which may occur in a nuclear
reactor represented by the general equation
235U92 + 1n0 236U92 2 new nuclides + 2 or 3 neutrons + energy
• The nuclides formed in this reaction are called fission fragments
• Main type of reactor is the Pressurised water-cooled reactor (PWR) – pg 372
fig 13.15 Physics by Chris Mee
• Inside a reactor, uranium-235 is placed in long fuel rods surrounded by
pressurised (150 atm) heavy water (deuterium) called a moderator whose
role is to slow down the neutrons released during fission
• Slow moving neutrons are more readily absorbed by uranium-235
• The number of neutrons available to trigger further fission reactions is
controlled by using control rods made of boron or cadmium
• Pushing the control rods further into the reactor core causes more neutrons
to be absorbed and hence the rate of fission reactions decreases
• The heat energy that is produced is removed from the reactor by a coolant
(water) which is then used to produce high temperature steam in a heat
exchanger to drive turbine generators
• The other main type of commercial nuclear reactor for generation of
electricity is the Advanced Gas-Cooled reactor (AGR) where helium gas is
the coolant
14
15. Disadvantages of nuclear fission
• If the fission material is less than a certain critical mass, too many neutrons
escape without hitting the nuclei
• The fission of uranium-235 produces medium-speed neutrons, while slow
neutrons are better at causing fission
• 1 neutron from each fission must cause further fission to maintain a chain
reaction
• Less than 1% of natural uranium is uranium-235 while over 99% is
uranium-238 which absorbs medium-speed neutrons without fiffion taking
place
• Uncontrollable chain reactions
15
16. Nuclear fusion
• Most of the energy on Earth comes from the Sun i.e. solar energy through
thermonuclear reactions
• It is produced by nuclear fusion reactions whereby light nuclei such as
isotopes of hydrogen join together to produce heavier more stable nuclei and
in doing so release energy
• One of the fusion reactions is 2H1 + 2H1 3He2 +1n0 + energy
• The binding energy per nucleon for light nuclei such as hydrogen is low, but
if 2 light nuclei are made to fuse together, they may form a stable new
heavier nucleus which has a higher binding energy per nucleon thus
releasing energy
• Fusion is much more difficult to achieve than fission
• In order to produce these thermonuclear reactions requires extremely high
temperatures(108 or more K) and pressures like that in the Sun because the
hydrogen nuclei have to be brought very close together against the
coulombic repulsive forces which repel each other
• We are at present unable to duplicate this reaction in a controlled manner
although work is being carried out by Joint European Torus (JET) and
International Tomahawk Engineering Research (ITER) an international
concern
16
17. Advantages of nuclear fusion
• Advantages are:
• Fuels will be readily obtainable for example deuterium can be extracted
from sea-water
• The main waste product is helium which is not radioactive
• Fusion reactors have built in safety features, as, if the system fails, fusion
stops
17
18. Radioactive decay series
• The daughter nuclide of a radioactive decay may itself be unstable and so
may emit radiation to give another different nuclide
• This sequence is called a radioactive decay series
• (to get picture of decay series)
• Alpha decay tends to occur in heavy nuclides which are below the stability
line of the N – Z curve
• β- - Beta decay(actually beta minus decay) tends to occur in heavy nuclides
which are above the stability line of the N – Z curve
• During beta minus decay, a neutron is converted into a proton, an electron
and an almost undetectable particle with no charge and near-zero mass
called an antineutrino
• β+ - Beta plus decay is an emission of a positron with the same mass as an
electron but a charge of +1 e. It is the antiparticle of an electron
18
20. Detecting/measuring radioactivity
• Some of the methods of detecting/measuring radioactivity are based on the
ionising properties of the particles or radiation
• The Geiger Counter – a tube with argon gas at low pressure and a thin mica
window to allow radiation in. Presence of radiation causes ions pairs in the
gas which are accelerated through a potential difference and counted
• Photographic plates – when radioactive emission strikes a photographic
film, the film reacts as if it had been exposed to a small amount of visible
light which when developed, a fogging or blackening is seen. Used in film
badge dosimeter where the radiation passes through different filters
consequently the type of radiation as well as the quantity can be assessed
• The Scintillation counter – this is a device that uses the principle of
photoelectric emission. When radiation is incident on zinc sulphide it emits
tiny pulses of light called a scintillation which causes emission of
photoelectrons from the negative electrode of a photomultiplier tube which
amplifies the current and is measured or counted
• All measurements should take into consideration the background radiation
due to natural radioactivity and man-made sources which should be
subtracted to obtain the correct count or reading
20
21. Nature of radioactive decay
• The emission of radiation is due to radioactivity is both spontaneous and
random
• Spontaneous means it is not affected by any external factors such as
temperature or pressure
• Random means that it is not possible to predict which nucleus in a sample
will decay next
• However there is a constant probability or chance that a nucleus will
decay in any fixed period of time
21
22. Random nature of radioactive decay-simulation
• A dice has 6 faces and if 6 dice are thrown simultaneously it is likely that
one of them will show a 6
• If 12 dice are thrown, it is likely that 2 of them will show a 6 and so on
• While it is possible to predict the likely number of sixes, it is impossible to
say which of the thrown dice will actually show a 6
• If a large number of dice say 6000 is thrown, and every time a 6 shows that
die is removed, below is a likely scenario
No of throws No of dice remaining No of dice removed
0 6000
1 5000 1000
2 4173 827
3 3477 696
4 2897 580
5 2414 483
6 2012 402
7 1677 335
8 1397 280 22
23. cont…
• If a graph of no of dice remaining vs no of throws is plotted, a decay curve
will be obtained which is not linear but has a pattern similar to the decay of
current in a circuit containing a capacitor and a resistor
• This experiment can be applied to model radioactive decay where the dice
represent the radioactive nuclei, and the 6 on the dice representing the
radioactive emission.
• Once a nucleus has undergone radioactive decay it is no longer available for
further decay
• A graph of the number of un-decayed nuclei in a sample against time has a
typical decay curve as above
• The half-life of a radioactive nuclide is the time taken for the number of
un-decayed nuclei to be reduced to half its original number
• Half-life may also be expressed in terms of the activity of the material
23
24. Example
The half-life of francium-221 is 4.8 minutes. Calculate the fraction of a sample
of francium-221 remaining un-decayed after a time of 14.4 minutes.
Solution:
14.4 mins is 3 half-lives since 14.4/4.8 = 3
therefore after 1st half-life only ½ remains
after 2nd half-life only ¼ remains
after 3rd half-life only ⅛ remains
24
25. Activity and decay constant
• On investigation, we find that the greater the number of radioactive nuclei in
the sample, the greater the rate of decay i.e. the more undecayed nuclei there
are, the more frequently disintegrations are likely to occur
• Mathematically this is described as dN/dt α N which gives
dN/dt = - λN
where N is the number of un-decayed atoms in the sample, and dN/dt is the
rate at which the number in the nuclei is changing, so – dN/dt represents the
rate of decay and is called the activity A of the source. A is measured in
becquerels (1 Bq = 1 s-1)
• Combining A = - dN/dt and dN/dt = - λN we have A = λN
where λ is a constant of proportionality known as the decay constant, of unit
s-1, yr-1 etc
• Decay constant λ, is defined as the probability per unit time that a nucleus
will undergo decay
• This is an important equation because it relates a quantity – dN/dt which we
can measure to a quantity which we cannot i.e. number of un-decayed nuclei
• Also we will see that λ is directly related to the half-life of the nuclei
25
26. Example
Calculate the number of phosphorus-32 nuclei in a sample which has an
activity of 5.0 x 106 Bq. (given decay constant λ of phosphorus-32 is 5.6 x 10-7
s-1)
Solution
from dN/dt = - λN, N = (-dN/dt)/λ = (-5.0 x 106)/(5.6 x 10-7) = -8.9 x 1012
The minus sign indicates a decay
26
27. Mathematical descriptions of radioactive decay
• To solve the equation dN/dt = - λN requires higher level mathematics;
however it is important to know the solution in order to find the variation
with time of the number of nuclei remaining in the sample
• The solution is N = Noe-λt or N = Noexp(-λt)
where No is the initial number of un-decayed nuclei in the sample, and N
is the number of un-decayed nuclei at time t
• This equation represents an exponential decay
• Since the activity A is proportional to N, the curve of A against t is of the
same shape and hence we can write
A = Aoe-λt or A = Aoexp(-λt)
27
28. Example
A sample of phosphorus-32 contains 8.6 x 1012 nuclei at time t = 0. The decay
constant of phosphorus-32 is 4.8 x 10-2 day-1. Calculate the number of un-
decayed phosphorus-32 nuclei in the sample after 10 days.
Solution
using N = Noe-λt , we have N = 8.6 x 1012 x e-0.048x10 = 5.3 x 1012
(always ensure that λ and t are consistent in their units i.e. days mathced to
days, seconds matched to seconds etc)
28
29. Decay constant and half-life
• Using N = Noe-λt we can derive an equation which relates the half-life to the
decay constant
• For any radioactive nuclide, the number of un-decayed nuclei after 1 half-
life is by the definition, equal to No/2 where No is the original un-decayed
nuclei.
• Using N = Noe-λt we have at time t = t½
N = Noe-λt½ and dividing each side by No
N/No = 1/2 = e-λt½
or 2 = eλt½
and taking natural logs of both sides
lne 2 = λt½ so that t½ = ln 2/λ t½ = 0.693/λ
29
30. Example
Calculate the half-life of radium-226 which has a decay constant of 1.42 x 10-11
s-1.
Solution
Using t½ = 0.693/λ = 4.88 x 1010 s
30
31. Particle Zoo
• By the mid 1930s, the understanding of the fundamental structure of matter
seemed almost complete
• Ordinary matter is made up of protons, neutrons and electrons
• The 30s’ and 40s’ saw the discovery of a number of particles not found in
normal matter through high energy collisions in particle accelerators, followed
by a whole host of unstable particles after 1960, most of which are short-lived
• These matter particles are classified into 2 main groups: hadrons and leptons
• There are now 12 known leptons, but more than 100 hadrons!
• It is clear that these do NOT represent the fundamental structure of matter!
31
32. Matter particles
Matter particles
Hadrons Leptons
(feel the strong nuclear force) (do not feel the strong nuclear force)
(have no size, low or no mass)
Baryons Mesons
(includes protons (particles lighter
neutrons & heavier than protons)
particles)
– Proton - Pion - Electron
– Neutron - Kaon - Electron-neutrino
– Lambda - etc - Muon
– Sigma - Tau
– Omega
– etc 32
33. Quantum numbers & quarks
•Particles have various quantum numbers assigned to them to represent
other quantities seen during interactions
Examples: Charge, Lepton number, Baryon number, Strangeness, Charm,
Spin, Topness, Bottomness
•The properties and quantum numbers of hadrons can be accounted for by
assuming that each particle is a combination of others called quarks which
have fractional charge
Example: Baryons are each made up of 3 quarks, Mesons are made up of
a quark & antiquark
33
34. Force carriers
•Nucleons need not be in contact to exert forces on each other
•To explain how the strong force is ‘carried’ from one nucleon to another, the
idea of exchange particles is used
•Particles that carry the fundamental forces are known as gauge bosons
•Quarks are bound together by gluons
Force Gauge bosons
strong gluon
electromagnetic photon
weak W plus, W minus
gravitational graviton
•Existence of a graviton is speculation only
•Grand unified theories(GUTs) seeks to link all the above forces
34