This document reviews peak-to-average power ratio (PAPR) problem in orthogonal frequency-division multiplexing (OFDM) schemes. OFDM is used in wireless technologies like LTE but suffers from high PAPR due to the summation of subcarriers. High PAPR causes signal distortion. The document discusses the mathematical model of PAPR in OFDM and evaluates companding as a PAPR reduction technique. Companding compresses the signal before transmission and expands it afterwards to improve the signal-to-noise ratio. The document concludes companding can effectively reduce PAPR in OFDM implementation.
A Simulation of Wideband CDMA System on Digital Up/Down ConvertersEditor IJMTER
In this paper, I present FPGA implementation of a digital down converter (DDC) and
digital up converter (DUC) for a single carrier WCDMA system. The DDC and DUC is complex in
nature. The implementation of DDC is simple because it does not require mixers or filters. Xilinx
System Generator and Xilinx ISE are used to develop the hardware circuit for the FPGA. Both the
circuits are verified on the Spartan - 3 FPGA
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
FPGA Implementation of Optimized CIC Filter for Sample Rate Conversion in Sof...idescitation
A software radio receiver is one which is tuned to
receive a transmitted signal on multiple communication
standards through software rather than hardware. To
incorporate multi-standard radio communications an
intermediate frequency of high ranges is used. Such high
intermediate frequencies when sampled with Nyquist rate
gets oversampled due to the phenomenon of Band Pass
sampling depending on the radio communication standard.
Hence a digital down converter (DDC) capable of reducing
the sampling rate in accordance with the radio communication
standard is required. Cascaded Integrated Comb (CIC) filters
are used for large sample rate conversion factors. In this paper
an optimized architecture for DDC employing CORDIC in
the mixer stage and the reconfigurable decimation factors for
CIC filters has been implemented. Optimized implementation
of CIC filter for sample rate conversion of multi-standard
radio communications reduces the hardware resources by more
than twenty percent when compared with the non-optimized
architecture.
A Simulation of Wideband CDMA System on Digital Up/Down ConvertersEditor IJMTER
In this paper, I present FPGA implementation of a digital down converter (DDC) and
digital up converter (DUC) for a single carrier WCDMA system. The DDC and DUC is complex in
nature. The implementation of DDC is simple because it does not require mixers or filters. Xilinx
System Generator and Xilinx ISE are used to develop the hardware circuit for the FPGA. Both the
circuits are verified on the Spartan - 3 FPGA
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
FPGA Implementation of Optimized CIC Filter for Sample Rate Conversion in Sof...idescitation
A software radio receiver is one which is tuned to
receive a transmitted signal on multiple communication
standards through software rather than hardware. To
incorporate multi-standard radio communications an
intermediate frequency of high ranges is used. Such high
intermediate frequencies when sampled with Nyquist rate
gets oversampled due to the phenomenon of Band Pass
sampling depending on the radio communication standard.
Hence a digital down converter (DDC) capable of reducing
the sampling rate in accordance with the radio communication
standard is required. Cascaded Integrated Comb (CIC) filters
are used for large sample rate conversion factors. In this paper
an optimized architecture for DDC employing CORDIC in
the mixer stage and the reconfigurable decimation factors for
CIC filters has been implemented. Optimized implementation
of CIC filter for sample rate conversion of multi-standard
radio communications reduces the hardware resources by more
than twenty percent when compared with the non-optimized
architecture.
Hybrid approach to solve the problem of papr in ofdm signal a surveyeSAT Journals
“Orthogonal frequency division multiplexing
method used to achieve the today’s need of wireless communication
3GPP Association for the use of LTE. The
higher data rate, higher bit rate, mitigated delay spread, lower multipath distortion,
OFDM system has few major issues associated with
ratio (PAPR)” associated with the signal.
interleaved OFDM, selective mapping (SLM)
windowing, clipping, filtering, tone rejection(TR), tone injection(TI), compandin
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some ne...Z AL Hashemi
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some new PAPR techniques (with matlab code)
By
Zainab Saad Hadi AL-Hashemi
A graduate of University of Baghdad, College of Engineering Electronic & Communications Engineering Department
This paper presents a novel approach for completely test enable feature and low-voltage delta– sigma analog-to-digital (A/D) converters for cutting edge wireless applications. Oversampling feature of ADCs and DACs is enough to meet the requirement related to in-band and adjacent channel leakage ratio (ACLR) execution of 3G/4G portable radio. The quantization noise which is not filtered in ADC is addressed. We have achieved work power-optimization and test enable feature of oversampling ADC is uses in design and simulation so that the problem of quantization error in continues time sigma delta ADC is solved. This paper suggests support to designer for selecting appropriate topologies with various channel arrangements, number of bits and oversampling issues. A test enable feature of CT A/D is presented introducing the test signal generation (TSG) and the COrdinate Rotation Digital Computer (CORDIC) for evaluating the performance of ADC. This helps in addressing the challenge of 4G and upcoming 5G wireless radio. System level plan of a delta–sigma modulator ADC for 4G radios is studied.
This presentation provides a primer in current 100G technology developments, with a focus on the two market available 100G transport approaches: multicarrier direct detection and single carrier coherent. Additionally, different application scenarios with hybrid 10G/100G and multiple 100G transmissions are discussed elucidating fiber impairments and compensation techniques.
Implementation of Algorithms For Multi-Channel Digital Monitoring ReceiverIOSR Journals
Abstract: Monitoring Receivers form an important constituent of the Electronic support. In Monitoring
Receiver we can monitor, demodulate or scan the multiple channels.
In this project, the Implementation of algorithm for multi channel digital monitoring receiver. The
implementation will carry out the channelization by the way of Digital down Converters (DDCs) and Digital
Base band Demodulation. The Intermediate Frequency (IF) at 10.7 MHz will be digitalized using Analog to
Digital Converter (ADC) with sampling frequency 52.5 MHz and further converted to Base band using DDCs.
Virtually all the digital receivers perform channel access using a DDC. The Base band data will be streamed to
the appropriate demodulators. Matlab Simulink will be used to simulate the logic modules before the
implementation. This system will be prototyped on an FPGA based COTS (Commercial-off-the-shelf)
development board. Xilinx System Generator will be used for the implementation of the algorithms.
Keywords: DDC, ADC, Digital Base band demodulation, IF, Monitoring Receiver.
Peak to Average Power Ratio (PAPR) Reduction in OFDM-OQAM Signalspaperpublications3
Abstract: The Orthogonal Frequency Division Multiplexing (OFDM) is a type of modulation that is being used for many of the latest wireless, telecommunication and broadcasting standards. OFDM is considered to be complicated than other signals but also it possess high data rate transmissions with relatively wide bandwidths. The major disadvantage included in OFDM signal is Peak-to-Average Power Ratio (PAPR) in higher level and Sensitive to Carrier offset. Hence there were found to be many reduction techniques for PAPR have been proposed where in need to reduction in high PAPR and carrier sensitivity still more to make it efficient for future optical domain standards. This paper not only makes the OFDM system advantageous but also suitable for fast data transmission and reduces the complication at receiver side, because all the transmitting data are cleared out of signal noise, interferences, etc. The technique which is going to get implemented for PAPR reduction is Optimized Iterative Clipping and Filtering (OICF).The OFDM is provided with the subcarrier of N=256 and the modulation of Offset Quadrature Amplitude Modulation (OQAM). The OQAM-OFDM provides the higher spectral efficiency and also the inter-symbol interference is avoided since not using Cyclic Prefix (CP) in OQAM-OFDM signal. The main reason for reducing PAPR is that to avoid non- linearity at the receiving end in high speed wireless communication.
Hybrid approach to solve the problem of papr in ofdm signal a surveyeSAT Journals
“Orthogonal frequency division multiplexing
method used to achieve the today’s need of wireless communication
3GPP Association for the use of LTE. The
higher data rate, higher bit rate, mitigated delay spread, lower multipath distortion,
OFDM system has few major issues associated with
ratio (PAPR)” associated with the signal.
interleaved OFDM, selective mapping (SLM)
windowing, clipping, filtering, tone rejection(TR), tone injection(TI), compandin
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some ne...Z AL Hashemi
An Overview : Peak to Average Power Ratio (PAPR) in OFDM system using some new PAPR techniques (with matlab code)
By
Zainab Saad Hadi AL-Hashemi
A graduate of University of Baghdad, College of Engineering Electronic & Communications Engineering Department
This paper presents a novel approach for completely test enable feature and low-voltage delta– sigma analog-to-digital (A/D) converters for cutting edge wireless applications. Oversampling feature of ADCs and DACs is enough to meet the requirement related to in-band and adjacent channel leakage ratio (ACLR) execution of 3G/4G portable radio. The quantization noise which is not filtered in ADC is addressed. We have achieved work power-optimization and test enable feature of oversampling ADC is uses in design and simulation so that the problem of quantization error in continues time sigma delta ADC is solved. This paper suggests support to designer for selecting appropriate topologies with various channel arrangements, number of bits and oversampling issues. A test enable feature of CT A/D is presented introducing the test signal generation (TSG) and the COrdinate Rotation Digital Computer (CORDIC) for evaluating the performance of ADC. This helps in addressing the challenge of 4G and upcoming 5G wireless radio. System level plan of a delta–sigma modulator ADC for 4G radios is studied.
This presentation provides a primer in current 100G technology developments, with a focus on the two market available 100G transport approaches: multicarrier direct detection and single carrier coherent. Additionally, different application scenarios with hybrid 10G/100G and multiple 100G transmissions are discussed elucidating fiber impairments and compensation techniques.
Implementation of Algorithms For Multi-Channel Digital Monitoring ReceiverIOSR Journals
Abstract: Monitoring Receivers form an important constituent of the Electronic support. In Monitoring
Receiver we can monitor, demodulate or scan the multiple channels.
In this project, the Implementation of algorithm for multi channel digital monitoring receiver. The
implementation will carry out the channelization by the way of Digital down Converters (DDCs) and Digital
Base band Demodulation. The Intermediate Frequency (IF) at 10.7 MHz will be digitalized using Analog to
Digital Converter (ADC) with sampling frequency 52.5 MHz and further converted to Base band using DDCs.
Virtually all the digital receivers perform channel access using a DDC. The Base band data will be streamed to
the appropriate demodulators. Matlab Simulink will be used to simulate the logic modules before the
implementation. This system will be prototyped on an FPGA based COTS (Commercial-off-the-shelf)
development board. Xilinx System Generator will be used for the implementation of the algorithms.
Keywords: DDC, ADC, Digital Base band demodulation, IF, Monitoring Receiver.
Peak to Average Power Ratio (PAPR) Reduction in OFDM-OQAM Signalspaperpublications3
Abstract: The Orthogonal Frequency Division Multiplexing (OFDM) is a type of modulation that is being used for many of the latest wireless, telecommunication and broadcasting standards. OFDM is considered to be complicated than other signals but also it possess high data rate transmissions with relatively wide bandwidths. The major disadvantage included in OFDM signal is Peak-to-Average Power Ratio (PAPR) in higher level and Sensitive to Carrier offset. Hence there were found to be many reduction techniques for PAPR have been proposed where in need to reduction in high PAPR and carrier sensitivity still more to make it efficient for future optical domain standards. This paper not only makes the OFDM system advantageous but also suitable for fast data transmission and reduces the complication at receiver side, because all the transmitting data are cleared out of signal noise, interferences, etc. The technique which is going to get implemented for PAPR reduction is Optimized Iterative Clipping and Filtering (OICF).The OFDM is provided with the subcarrier of N=256 and the modulation of Offset Quadrature Amplitude Modulation (OQAM). The OQAM-OFDM provides the higher spectral efficiency and also the inter-symbol interference is avoided since not using Cyclic Prefix (CP) in OQAM-OFDM signal. The main reason for reducing PAPR is that to avoid non- linearity at the receiving end in high speed wireless communication.
Performance Analysis of PAPR Reduction in OICF Scheme with Modulation Techniquesijtsrd
Recently, orthogonal frequency division multiplexing has been regarded as one of the core technologies for various wireless communication systems. Especially, OFDM has been adopted as a standard for various wireless communication systems such as wireless local area networks, wireless metropolitan area networks, DAB, and DVB. In this paper present PAPR reduction techniques for QAM modulation techniques. The simulation results shown that our proposed power reduction techniques OICF were proposed to reduce the high Peak to Average Power Ratio values. The Simulations are performed using OICF technique with modulation technique under both AWGN channel. The simulation result shows the relationship between Complementary Cumulative Distribution Function versus PAPR. Sonal Agrawal | Praven K Patidar "Performance Analysis of PAPR-Reduction in OICF Scheme with Modulation Techniques" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31615.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31615/performance-analysis-of-paprreduction-in-oicf-scheme-with-modulation-techniques/sonal-agrawal
Advanced approach for reducing papr in ofdm systems to minimize interference ...eSAT Journals
Abstract
Orthogonal Frequency Division Multiplexing is a popular modulation scheme and finds its use in wireless communication and mostly drawing attention towards 4G mobile communication. Wireless Technology is cardinal as it offers high data rate transmission, which is needed for efficacious communication. The main features of OFDM technique are that it can easily acclimate to severe channel conditions without complex time-domain equalization and is vigorous against Intersymbol Interference (ISI) and fading caused by multipath propagation. But the OFDM system faces the problem of PAPR i.e. Peak to Average Power Ratio. This PAPR effect is tried to be reduced using a combined technique which makes use of clipping and filtering technique along with companding technique. The simulation results show us that the PAPR value reduces to 4.41dB with a value of 128 subcarriers. Earlier used approaches for PAPR reduction were SLM, PTS, Tone reservation etc. The proposed approach shows that PAPR effect is tried to be reduced to a great extent.
Key Words: OFDM, PAPR, BER ,FFT, IFFT etc
Low Peak to Average Power Ratio and High Spectral Efficiency Using Selective ...theijes
A low complexity peak to average power ratio (PAPR) reduction scheme for orthogonal frequency division multiplexing (OFDM) systems is proposed. All pass filters technique used PAPR is reduction but small amount of reduction, So use Selective Mapping (SLM) technique reduce PAPR and SNR increases.
Reduction of PAPR of OFDM Using Exponential Companding Technique with Network...AM Publications
In this paper a new Exponential companding technique with Network coding is proposed to reduce the Peak-to-
Average Ratio (PAPR) and Bit-Error-Rate in Orthogonal Frequency Division Multiplexing (OFDM) signals. By uniformly
distribution of transmitted OFDM signals, the proposed technique effectively reduces the PAPR by compressing the peak signals
and expanding the small signals, unlike the Mu-law companding technique. The Mu-law companding only enlarging small
signal but our Exponential companding adjust both small as well as large signals without changing the average power by
properly choosing transform parameters. Our simulations results, which consider a baseband OFDM system with Additive White
Gaussian Noise (AWGN) channel, Binary Symmetric Channel (BSC) and a Solid State Power Amplifier (SSPA) shows that the
proposed exponential companding technique can offer better PAPR reduction, Bit Error Rate (BER) than the Conventional
coding and Mu-law companding.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
A review paper on the papr analysis of orthogonal frequency division multiple...ijmnct
OFDM (Orthogonal Frequency Division Multiplexing) has been raised a new modulation technique. Due
to its advantages in multipath fading channel e.g. robust against ISI, ICI and some other advantages like
best QoS for multiple users, efficient usage of bandwidth it is suggested to be the modulation technique for
next generation 4G networks e.g. LTE. But along with all its advantages there are some disadvantages also
e.g. High PAPR (Peak to Average Power Ratio) at the transmitter end and BER (Bit Error Rate) at the
receiving end. Since OFDM is only used in the downlink of 4G networks. To reduce the problems of OFDM
some techniques e.g. SLM, PTS, Clipping, Coding, & Pre-coding etc are suggested but none of them is
reduce the PAPR and BER to an acceptable value. This Paper will discuss some techniques of PAPR &
BER reduction, and their advantages and disadvantages in detail.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.