This document describes a proposed reconfigurable finite impulse response (FIR) filter architecture for multi-standard digital up converters. The FIR filter is used to eliminate distortion caused by upsampling. The proposed architecture uses a two-step optimization technique to reduce delay. It decreases the number of input coefficients to the multiplier block and addition unit, reducing computations. It also uses a carry select adder instead of a ripple carry adder in these blocks, reducing delay by 22.23%. The filter supports three standards - UMTS, WCDMA, and DVB. Simulation results show the proposed design achieves lower delay compared to the conventional design.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Inventions (IJEI) provides a multidisciplinary passage for researchers, managers, professionals, practitioners and students around the globe to publish high quality, peer-reviewed articles on all theoretical and empirical aspects of Engineering and Science.
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
FPGA Implementation of Optimized CIC Filter for Sample Rate Conversion in Sof...idescitation
A software radio receiver is one which is tuned to
receive a transmitted signal on multiple communication
standards through software rather than hardware. To
incorporate multi-standard radio communications an
intermediate frequency of high ranges is used. Such high
intermediate frequencies when sampled with Nyquist rate
gets oversampled due to the phenomenon of Band Pass
sampling depending on the radio communication standard.
Hence a digital down converter (DDC) capable of reducing
the sampling rate in accordance with the radio communication
standard is required. Cascaded Integrated Comb (CIC) filters
are used for large sample rate conversion factors. In this paper
an optimized architecture for DDC employing CORDIC in
the mixer stage and the reconfigurable decimation factors for
CIC filters has been implemented. Optimized implementation
of CIC filter for sample rate conversion of multi-standard
radio communications reduces the hardware resources by more
than twenty percent when compared with the non-optimized
architecture.
Evaluation and Analysis of Rate Control Methods for H.264/AVC and MPEG-4 Vide...IJECEIAES
Audio, image and video signals produce a vast amount of data. The only solution of this problem is to compress data before storage and transmission. In general there is the three crucial terms as, Bit Rate Reduction, Fast Data Transfer and Reduction in Storage. Rate control is a vigorous factor in video coding. In video communications, rate control must ensure the coded bitstream can be transmitted effectively and make full use of the narrow bandwidth. There are various test models usually suggested by a standard during the development of video codes models in order to video coding which should be suffienciently be efficient based on H.264 at very low bit rate. These models are Test Model Number 5 (TMN5), Test Model Number 8 for H.263, and Verification Model 8 (VM8) for MPEG-4 and H.264 etc. In this work, Rate control analysis for H.264, MPEG-4 performed. For Rate control analysis test model verification model version 8.0 is adopted.
Performance Analysis of IEEE 802.15.4 Transceiver System under Adaptive White...IJECEIAES
Zigbee technology has been developed for short range wireless sensor networks and it follows IEEE 802.15.4 standard. For such sensors, several considerations should be taken including; low data rate and less design complexity in order to achieve efficient performance considering to the transceiver systems. This research focuses on implementing a digital transceiver system for Zigbee sensor based on IEEE 802.15.4. The system is implemented using offset quadrature phase shift keying (OQPSK) modulation technique with half sine pulse-shaping method. Direct conversion scheme has been used in the design of Zigbee receiver in order to fulfill the requirements mentioned above. System performance is analyzed considering to BER when it encountered adaptive white Gaussian noise (AWGN), besides showing the effect of using direct sequence spread spectrum (DSSS) technique.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
International Journal of Engineering Inventions (IJEI) provides a multidisciplinary passage for researchers, managers, professionals, practitioners and students around the globe to publish high quality, peer-reviewed articles on all theoretical and empirical aspects of Engineering and Science.
The peer-reviewed International Journal of Engineering Inventions (IJEI) is started with a mission to encourage contribution to research in Science and Technology. Encourage and motivate researchers in challenging areas of Sciences and Technology.
FPGA Implementation of Optimized CIC Filter for Sample Rate Conversion in Sof...idescitation
A software radio receiver is one which is tuned to
receive a transmitted signal on multiple communication
standards through software rather than hardware. To
incorporate multi-standard radio communications an
intermediate frequency of high ranges is used. Such high
intermediate frequencies when sampled with Nyquist rate
gets oversampled due to the phenomenon of Band Pass
sampling depending on the radio communication standard.
Hence a digital down converter (DDC) capable of reducing
the sampling rate in accordance with the radio communication
standard is required. Cascaded Integrated Comb (CIC) filters
are used for large sample rate conversion factors. In this paper
an optimized architecture for DDC employing CORDIC in
the mixer stage and the reconfigurable decimation factors for
CIC filters has been implemented. Optimized implementation
of CIC filter for sample rate conversion of multi-standard
radio communications reduces the hardware resources by more
than twenty percent when compared with the non-optimized
architecture.
Evaluation and Analysis of Rate Control Methods for H.264/AVC and MPEG-4 Vide...IJECEIAES
Audio, image and video signals produce a vast amount of data. The only solution of this problem is to compress data before storage and transmission. In general there is the three crucial terms as, Bit Rate Reduction, Fast Data Transfer and Reduction in Storage. Rate control is a vigorous factor in video coding. In video communications, rate control must ensure the coded bitstream can be transmitted effectively and make full use of the narrow bandwidth. There are various test models usually suggested by a standard during the development of video codes models in order to video coding which should be suffienciently be efficient based on H.264 at very low bit rate. These models are Test Model Number 5 (TMN5), Test Model Number 8 for H.263, and Verification Model 8 (VM8) for MPEG-4 and H.264 etc. In this work, Rate control analysis for H.264, MPEG-4 performed. For Rate control analysis test model verification model version 8.0 is adopted.
Performance Analysis of IEEE 802.15.4 Transceiver System under Adaptive White...IJECEIAES
Zigbee technology has been developed for short range wireless sensor networks and it follows IEEE 802.15.4 standard. For such sensors, several considerations should be taken including; low data rate and less design complexity in order to achieve efficient performance considering to the transceiver systems. This research focuses on implementing a digital transceiver system for Zigbee sensor based on IEEE 802.15.4. The system is implemented using offset quadrature phase shift keying (OQPSK) modulation technique with half sine pulse-shaping method. Direct conversion scheme has been used in the design of Zigbee receiver in order to fulfill the requirements mentioned above. System performance is analyzed considering to BER when it encountered adaptive white Gaussian noise (AWGN), besides showing the effect of using direct sequence spread spectrum (DSSS) technique.
Implementation of Algorithms For Multi-Channel Digital Monitoring ReceiverIOSR Journals
Abstract: Monitoring Receivers form an important constituent of the Electronic support. In Monitoring
Receiver we can monitor, demodulate or scan the multiple channels.
In this project, the Implementation of algorithm for multi channel digital monitoring receiver. The
implementation will carry out the channelization by the way of Digital down Converters (DDCs) and Digital
Base band Demodulation. The Intermediate Frequency (IF) at 10.7 MHz will be digitalized using Analog to
Digital Converter (ADC) with sampling frequency 52.5 MHz and further converted to Base band using DDCs.
Virtually all the digital receivers perform channel access using a DDC. The Base band data will be streamed to
the appropriate demodulators. Matlab Simulink will be used to simulate the logic modules before the
implementation. This system will be prototyped on an FPGA based COTS (Commercial-off-the-shelf)
development board. Xilinx System Generator will be used for the implementation of the algorithms.
Keywords: DDC, ADC, Digital Base band demodulation, IF, Monitoring Receiver.
Matlab Based Decimeter Design Analysis Wimax Appliacationiosrjce
A Digital down Converter (DDC), which is basically used to convert an intermediate frequency (IF)
signal to its baseband form, forms an integral part of wireless receivers. The major functional blocks of a DDC
constitute a mixer, Numerically Controlled Oscillator (NCO) and an FIR filter chain. In this paper, We can
comparison of two window and see the costs of all Window filters
Performance Improvement of IEEE 802.22 WRAN Physical LayerIOSR Journals
The spectrum available for the wireless services is limited, the increased demand of wireless
application has put a lot of limitations on the utilization of available radio spectrum. For the efficient spectrum
utilization for wireless application IEEE 802.22 standard i.e. WRAN (Wireless Regional Area Network) is
developed which is based on cognitive radio technique that senses the free available spectrum. It allows sharing
of geographically unused channels allocated to the TV Broadcast Service, without interference.
In this paper we are evaluating the performance of WRAN over physical layer with QPSK, 16-QAM
and 64-QAM modulation with Convolution coding with code rate of 1/2, 2/3, 3/4, 5/6 and obtaining the BER
curves for rician channel. Simulation is performed in MATLAB
Implementation Cost Analysis of the Interpolator for the Wimax Technologyiosrjce
The design of the multirate filter (programmable) has been proposed which can be used in digital
transceivers that meets 802.16d/e (wimax) standard in the wireless communication system. Wimax is a
technology emerging in the wireless communication system in order to increase the broadband wireless internet
access. As there is wide spread need of the digital representation of the signal for the transmission and storage
which create the challenges in DSP [1]. In this paper, analysis of the implementation cost of interpolator for the
wimax technology, and cost of interpolator is analyzed on the basis of number of adders and multiplier. The
Filters are designed using the FDA (filters design and analysis) tool in MATLAB.
BER Analysis of OFDM Systems with Varying Frequency Offset Factor over AWGN a...rahulmonikasharma
The progressively escalating demand for tremendously high rate data transmission over wireless mediums needsresourcefulconcord of electromagnetic resources considering restrictions like power incorporation, spectrum proficiency, robustness in disparity to multipath propagation and implementation complication. Orthogonal frequency division multiplexing (OFDM) is a favorable approach for upcoming generation wireless communication systems. However its susceptibility to the frequency offset triggered by frequency difference between local oscillator of transmitter and receiver or due to Doppler shift results to Inter Carrier Interference. This delinquent of ICI results inworsening performance of the wireless systems as bit error rate increaseswith increase in value of frequency offset. In this paper simulation results aredemonstratedfor analyzing the effect of varying frequency offset factor on system’s error rate performance.
Analysis of various mcm algorithms for reconfigurable rrc fir filtereSAT Journals
Abstract
Low complexity and power consumption are the key concerns while designing reconfigurable pulse shaping FIR filter for multistandard wireless communication system. In FIR filter, the single input to be multiplied by a set of coefficients known as multiple constant multiplications. This multiple constant multiplication becomes an obstruction in many applications. To overcome that, Digit Based Recoding, Canonic Sign Digit, Common Subexpression Elimination and Binary Common Subexpression Elimination algorithms are used to optimize the number of addition and subtraction operations. While designing these MCM algorithms in the architecture of RRC FIR filter, Binary Common Subexpression Elimination (BCSE) algorithm provides the better performance in terms of area and power.
Keywords: Multiple Constant Multiplication (MCM), Root Raised Cosine Filter (RRC), Canonic Sign Digit (CSD), Multiple Sign Digit (MSD), Common Subexpression Elimination (CSE)
Implementation of Algorithms For Multi-Channel Digital Monitoring ReceiverIOSR Journals
Abstract: Monitoring Receivers form an important constituent of the Electronic support. In Monitoring
Receiver we can monitor, demodulate or scan the multiple channels.
In this project, the Implementation of algorithm for multi channel digital monitoring receiver. The
implementation will carry out the channelization by the way of Digital down Converters (DDCs) and Digital
Base band Demodulation. The Intermediate Frequency (IF) at 10.7 MHz will be digitalized using Analog to
Digital Converter (ADC) with sampling frequency 52.5 MHz and further converted to Base band using DDCs.
Virtually all the digital receivers perform channel access using a DDC. The Base band data will be streamed to
the appropriate demodulators. Matlab Simulink will be used to simulate the logic modules before the
implementation. This system will be prototyped on an FPGA based COTS (Commercial-off-the-shelf)
development board. Xilinx System Generator will be used for the implementation of the algorithms.
Keywords: DDC, ADC, Digital Base band demodulation, IF, Monitoring Receiver.
Matlab Based Decimeter Design Analysis Wimax Appliacationiosrjce
A Digital down Converter (DDC), which is basically used to convert an intermediate frequency (IF)
signal to its baseband form, forms an integral part of wireless receivers. The major functional blocks of a DDC
constitute a mixer, Numerically Controlled Oscillator (NCO) and an FIR filter chain. In this paper, We can
comparison of two window and see the costs of all Window filters
Performance Improvement of IEEE 802.22 WRAN Physical LayerIOSR Journals
The spectrum available for the wireless services is limited, the increased demand of wireless
application has put a lot of limitations on the utilization of available radio spectrum. For the efficient spectrum
utilization for wireless application IEEE 802.22 standard i.e. WRAN (Wireless Regional Area Network) is
developed which is based on cognitive radio technique that senses the free available spectrum. It allows sharing
of geographically unused channels allocated to the TV Broadcast Service, without interference.
In this paper we are evaluating the performance of WRAN over physical layer with QPSK, 16-QAM
and 64-QAM modulation with Convolution coding with code rate of 1/2, 2/3, 3/4, 5/6 and obtaining the BER
curves for rician channel. Simulation is performed in MATLAB
Implementation Cost Analysis of the Interpolator for the Wimax Technologyiosrjce
The design of the multirate filter (programmable) has been proposed which can be used in digital
transceivers that meets 802.16d/e (wimax) standard in the wireless communication system. Wimax is a
technology emerging in the wireless communication system in order to increase the broadband wireless internet
access. As there is wide spread need of the digital representation of the signal for the transmission and storage
which create the challenges in DSP [1]. In this paper, analysis of the implementation cost of interpolator for the
wimax technology, and cost of interpolator is analyzed on the basis of number of adders and multiplier. The
Filters are designed using the FDA (filters design and analysis) tool in MATLAB.
BER Analysis of OFDM Systems with Varying Frequency Offset Factor over AWGN a...rahulmonikasharma
The progressively escalating demand for tremendously high rate data transmission over wireless mediums needsresourcefulconcord of electromagnetic resources considering restrictions like power incorporation, spectrum proficiency, robustness in disparity to multipath propagation and implementation complication. Orthogonal frequency division multiplexing (OFDM) is a favorable approach for upcoming generation wireless communication systems. However its susceptibility to the frequency offset triggered by frequency difference between local oscillator of transmitter and receiver or due to Doppler shift results to Inter Carrier Interference. This delinquent of ICI results inworsening performance of the wireless systems as bit error rate increaseswith increase in value of frequency offset. In this paper simulation results aredemonstratedfor analyzing the effect of varying frequency offset factor on system’s error rate performance.
Analysis of various mcm algorithms for reconfigurable rrc fir filtereSAT Journals
Abstract
Low complexity and power consumption are the key concerns while designing reconfigurable pulse shaping FIR filter for multistandard wireless communication system. In FIR filter, the single input to be multiplied by a set of coefficients known as multiple constant multiplications. This multiple constant multiplication becomes an obstruction in many applications. To overcome that, Digit Based Recoding, Canonic Sign Digit, Common Subexpression Elimination and Binary Common Subexpression Elimination algorithms are used to optimize the number of addition and subtraction operations. While designing these MCM algorithms in the architecture of RRC FIR filter, Binary Common Subexpression Elimination (BCSE) algorithm provides the better performance in terms of area and power.
Keywords: Multiple Constant Multiplication (MCM), Root Raised Cosine Filter (RRC), Canonic Sign Digit (CSD), Multiple Sign Digit (MSD), Common Subexpression Elimination (CSE)
Basic signal processing system design on fpga using lms based adaptive filtereSAT Journals
Abstract
Adaptive digital filter based on LMS algorithms widely used in the area of digital signal processing to iteratively estimate the
statistics of an unknown signal. Design of an adaptive filter is based on three major computing elements namely multiplier, adder
and delay unit torealize the Finite Impulse Response (FIR) filter. The filter weights( coefficient) of the FIR filter are adjusted
automatically by Least Mean Square of the error so as to match the adapted output to the desired input. This paper explains the
design of adaptive filter by two approaches. One is model based approach and other is Field Programmable Gate Arrays
(FPGAs). The model based design approach is developed around MATLAB, SIMULINK and SYSTEM GENERATOR tools, which
provide a virtual FPGA platform. Modern FPGA include the resources needed to design efficient filtering structures. The LMS
algorithm has been implemented on CYCLONE II EP2C35F672C8 FPGA device, using ALTERA QUARTUS II development
platform. The three major demonstrable applications cited in the present work are System Identification, Noise reduction and
Echo cancellation.
Keywords – Signal Processing; FPGA; Adaptive Filter; DE2KIT
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers