High Performance Liquid Chromatography (HPLC) is described. HPLC uses high pressure to force a mobile phase through a column at a fast rate, increasing resolution. It discusses the types of chromatography used in HPLC, including normal phase, reverse phase, ion-exchange, and size-exclusion. The instrumentation of HPLC is also summarized, including components like the pump, mixing unit, degasser, injector, column, and detector.
High Performance Liquid Chromatography (HPLC) is a form of column chromatography that pumps a sample mixture or analyte in a solvent (known as the mobile phase) at high pressure through a column with chromatographic packing material (stationary phase).
fluid chromatography (SFC) can be used on an analytical
scale.
It is a combination of High performance liquid chromatography (HPLC)
and Gas chromatography (GC).
It can be used with non-volatile and thermally labile analytes.
It can be used with the universal flame ionization detector.
It is important to producing narrower peaks due to rapid diffusion.
It is important for the chiral separations and analysis of high-molecularweight
hydrocarbons.
Supercritical fluids are suitable as a substitute for organic solvents in a
range of industrial and laboratory processes.
Ion pair chromatography for pharmacy studentsabhishek rai
Ion-PairChromatography
A GENERALISED OVERVIEW
Chromatography
HPLC
Reverse Phase Chromatography
Ion Pair Chromatography
Ion Pair Reagent
Mechanism of Ion Pair Chromatography
Ion Pair Wash Procedure
High Performance Liquid Chromatography (HPLC) is a form of column chromatography that pumps a sample mixture or analyte in a solvent (known as the mobile phase) at high pressure through a column with chromatographic packing material (stationary phase).
fluid chromatography (SFC) can be used on an analytical
scale.
It is a combination of High performance liquid chromatography (HPLC)
and Gas chromatography (GC).
It can be used with non-volatile and thermally labile analytes.
It can be used with the universal flame ionization detector.
It is important to producing narrower peaks due to rapid diffusion.
It is important for the chiral separations and analysis of high-molecularweight
hydrocarbons.
Supercritical fluids are suitable as a substitute for organic solvents in a
range of industrial and laboratory processes.
Ion pair chromatography for pharmacy studentsabhishek rai
Ion-PairChromatography
A GENERALISED OVERVIEW
Chromatography
HPLC
Reverse Phase Chromatography
Ion Pair Chromatography
Ion Pair Reagent
Mechanism of Ion Pair Chromatography
Ion Pair Wash Procedure
Instrumentation of HPLC, principle by kk sahuKAUSHAL SAHU
INTRODUCTION
Instrumentation of HPLC
TYPES OF HPLC
PARAMETERS
APPLICATION
CONCLUSION
REFERENCE
High-performance liquid chromatography ( HPLC) is a specific form of column chromatography generally used in biochemistry and analysis to separate, identify, and quantify the active compounds.
HPLC mainly utilizes a column that holds packing material (stationary phase), a pump that moves the mobile phase(s) through the column, and a detector that shows the retention times of the molecules.
A presentation on column efficiency parameters in chromatography.. A part of gas chromatography in pharmacutical analysis..will be helpful for all mphrm students
In this slide contains types of HPLC Columns, Plate theory and Van Deemter Equation.
Presented by : Malarvannan.M (Department of pharmaceutical analysis).
RIPER,anantpur.
In this slide contains principle, instrumentation, methodology, and application of gel chromatography.
Presented by: SATHEES CHANDRA (Department of pharmaceutical analysis).
RIPER, anantapur
Detectors are the brain of any chromatograhic system. It help us to record the chromatogram based on certain characteristics of the analyte and help us in identifying that compound both qualitatively and quantitatively.
Instrumentation of HPLC, principle by kk sahuKAUSHAL SAHU
INTRODUCTION
Instrumentation of HPLC
TYPES OF HPLC
PARAMETERS
APPLICATION
CONCLUSION
REFERENCE
High-performance liquid chromatography ( HPLC) is a specific form of column chromatography generally used in biochemistry and analysis to separate, identify, and quantify the active compounds.
HPLC mainly utilizes a column that holds packing material (stationary phase), a pump that moves the mobile phase(s) through the column, and a detector that shows the retention times of the molecules.
A presentation on column efficiency parameters in chromatography.. A part of gas chromatography in pharmacutical analysis..will be helpful for all mphrm students
In this slide contains types of HPLC Columns, Plate theory and Van Deemter Equation.
Presented by : Malarvannan.M (Department of pharmaceutical analysis).
RIPER,anantpur.
In this slide contains principle, instrumentation, methodology, and application of gel chromatography.
Presented by: SATHEES CHANDRA (Department of pharmaceutical analysis).
RIPER, anantapur
Detectors are the brain of any chromatograhic system. It help us to record the chromatogram based on certain characteristics of the analyte and help us in identifying that compound both qualitatively and quantitatively.
HPLC Principle,Instrumentation and ApplicationAlakesh Pradhan
HPLC Chromatography and its principle
Liquid chromatography
High Performance Liquid Chromatography ( HPLC )
The components of the high performance liquid chromatograph (HPLC).
The separation process.
The chromatogram
This power point presentation explains double helical structure of DNA as proposed by Watson and Crick (1953).Attempts have also been made to high light the valuable contributions made by Rosalind Franklin and Wilkins. Brief details of different types of DNA have also been included.
HPLC is a High Performance liquid Chromatography.
High Pressure Liquid Chromatography.
High Priced Liquid Chromatography.
It is column chromatography.
It is Liquid Chromatography.
It is modified from of gas chromatography, it is applicable for both Volatile as well as Non volatile compound.
It can mainly divided by two types 1. Normal phase HPLC 2. Reversed Phase HPLC.
It is having a high resolution and separation capacity.
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Instructions for Submissions thorugh G- Classroom.pptxJheel Barad
This presentation provides a briefing on how to upload submissions and documents in Google Classroom. It was prepared as part of an orientation for new Sainik School in-service teacher trainees. As a training officer, my goal is to ensure that you are comfortable and proficient with this essential tool for managing assignments and fostering student engagement.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
2. CHROMATOGRAPHY :
Chromatography is defined as the method of separating a
mixture of components into individual components.
This techniques is based on the differences in the rate at
which the components of a mixture move through a porous
medium(stationary phase) under the influence of some
solvent or gas(mobile phase).
2
3. WHY USE HPLC?
Simultaneous analysis
High resolution
High sensitivity
Good repeatability
Moderate analysis condition
Easy to fractionate and purify
Not destructive
3
4. HPLC
HPLC- It was originally referred to as High Pressure Liquid
Chromatography since high pressure is applied using a
pumping system to the column.
This pressure works by forcing the mobile phase through, at
much higher rate increasing the resolution power.
Due to its high efficiency and performance High Pressure
Liquid Chromatography is referred to as High Performance
Liquid Chromatography.
4
7. 1.Normal Phase Chromatography:
Stationary Phase – Polar nature.
Eg: SiO2,Al2O3
Mobile Phase – Non-Polar nature.
Eg:heptane,hexane,cyclohexane,CHCl3,CH3OH
Mechanism:
Polar compounds travels slower & eluted slowly due to
higher affinity to st.phase
Non-polar compounds travels faster & eluted 1st due to
lower affinity to st.phase.
This technique is not widely used in pharmaceutical
separations.
7
17. 5.Ion-Exchange Chromatography:
It is the process by which similar charged ions such as
cations, anions can be separated.
By using the suitable ion exchange resin it can be
separated.
It exchanges the ions according to their relative affinities.
The exchange takes place in a reversible manner between
the ions of the solution and the ions present in the ion
exchange resin .
17
19. 6.Molecular Exclusion Chromatography:
A mixture of components with different molecular sizes are
separated by using gels.
The gels used acts as molecular sieve & hence a mixture of
substances with different molecular sizes are separated.
Soft gels like dextran, agarose or poly acrylamide are used.
Semi-rigid gels like polystyrene, alkyl dextran in non
aqueous medium are also used.
19
24. Adsorption Chromatography:
The principle of separation is adsorption .
Separation of compounds takes place based on the
difference in the affinity of the compunds towards
stationary phase as in the normal and reverse phase.
The lesser the affinity of the sample particles towards the
stationary phase the faster the time of elution of the
sample.
24
25. 25
Separation Mechanism
Due to different interaction between stationary phase and different
sample, the molecules move at different rate, therefore separation
can be done.
Stationary Phase
Stronger
interaction
Weaker
interaction
Mobile Phase
2
1
26. Partition chromatography:
In this the stationary phase is a liquid which is coated on
the solid support on the column.
The mobile phase is also a liquid.
When solute along with the mobile phase is passed over
the stationary phase it gets dissolved to the surface of
the liquid coated to the solid support.
The compounds which have more partition co-efficient
are eluted slowly when compared to the compounds
with low partition co-efficient. 26
30. 30
Outline of LC-2010
System Controller
UV detector
Auto sampler
Column Oven
Pump Unit
Reservior Tray
Degassing Unit
Low pressure
gradient device
31. GRADIENT CONTROLLER
Isocratic solvents- mobile phase is prepared by using
pure solvent or mixture of solvents which has same
eluting power or polarity.
Gradient solvents- in this the polarity of the solvent is
gradually increased & hence the solvent composition has
to be changed.
Hence this gradient controller is used when two or more
solvent pumps are used for such separations.
31
32. 32
Elution Modes
Long Time Analysis
MeOH / H2O = 6 / 4
( Column : ODS )
Bad Separation MeOH / H2O = 8 / 2
Isocratic
Isocratic
MeOH%Volts
Time
Gradient
33. 33
Isocratic System
Simple system with one pump and one solvent reservoir.
If more than one solvent is used, solvents should be premixed.
Data
processor
Pump
Injector
Column
Oven
Detector
Mobile Phase
35. MIXING UNITS:
• Low pressure-mixing chamber
which uses Helium for de-gassing
• High pressure-mixing chamber
does not require Helium for de-
gassing
Mixing
units
• Static mixer-which is packed with
beads
• Dynamic mixer-with magnetic
stirrer & operates under high
pressure
Mixing of
solvents
done by
35
36. DEGASSING OF SOLVENTS:
Several gases are soluble in organic solvents, when high
pressure is pumped, the formation of gas bubbles
increases which interferes with the separation
process, steady baseline & shape of the peak.
Hence de-gassing is very important and it can be done by
various ways.
36
37. (i) Vacuum filtration:
De-gassing is accomplanished by applying a partial
vacuum to the solvent container.
But it is not always reliable & complete.
(ii) Helium Purging:
Done by passing Helium through the solvent.
This is very effective but Helium is expensive.
(iii) Ultrasonication:
Done by using ultrasonicator which converts ultra high
frequency to mechanical vibrations.
37
38. PUMP:
The solvents or mobile phase must be passed through a
column at high pressures at up to 6000 psi(lb/in²) or 414
bar.
As the particle size of stationary phase is smaller (5 to
10µ) the resistance to the flow of solvent will be high.
That is, smaller the particle size of the stationary phase
the greater is the resistance to the flow of solvents.
Hence high pressure is recommended.
38
39. Requirements for pumps:
Generation of pressure of about 5000 psi.
Pulse free output & all materials in the pump should be
chemically resistant to solvents.
Flow rates ranging from 0.1 to 10 mL/min
Pumps should be capable of taking the solvent from a
single reservoir or more than one reservoir containing
different solvents simultaneously.
39
40. Types of pumps
used in HPLC
DISPLACEMENT
PUMPS
RECIPROCATING
PUMPS
PNEUMATIC
PUMPS
40
42. DISPLACEMENT PUMPS
It consists of large, syringe like chambers equipped with a
plunger activated by a screw driven mechanism powered by a
stepping motor.
So it is also called as Screw Driven Syringe Type Pump.
Advantages:- It produces a flow that tends to be independent
of viscosity & back pressure.
Disadvantages:- It has a limited solvent capacity(~250) &
considerably inconvenient when solvents must be changed.
42
44. RECIPROCATING PUMPS:
This pump transmits alternative pressure to the solvent
via a flexible diaphragm ,which in turn is hydraulically
pumped by a reciprocating pump.
Disadvantages:-
Produces a pulsed flow which is damped because pulses
appear as baseline noise on the chromatograph.
This can be overcome by use of dual pump heads or
elliptical cams to minimize such pulsations.
44
47. Solvent is pumped back and
forth by a motor driven piston
Two ball check valves which
open & close which controls the
flow
The piston is in direct contact
with the solvent
Small internal volume 35-400μL
High output pressure up to
10,000 psi
Ready adaptability to gradient
elution and constant flow rate 47
48. Advantages:
Have small internal volume of 35-400µL
Higher output pressures up to 10,000 psi.
Adaptability to gradient elution.
Large solvent capacities & constant flow rates.
Largely independent of column back pressure & solvent
viscosity.
48
49. PNEUMATIC PUMPS:
In this pumps, the
mobile phase is driven
through the column with
the use of pressure
produced from a gas
cylinder.
It has limited capacity of
solvent 49
50. COLUMN:
There are various columns
that can be used in HPLC
method.
They are as follows:
Guard Column
Derivatizing Column
Capillary Column
Fast column
Analytical Column
Preparatory Column
50
51. GUARD COLUMN:
Guard columns are placed anterior to the separating
column.
This protects and prolongs the life & usefulness of the
separating column.
They are dependable columns designed to filter or
remove:-
particles that clog the separating column,
compounds and ions that could ultimately cause ‘baseline
drift’, decreased resolution, decreased sensitivity and
create false peaks.
51
52. Compounds that may cause precipitation upon contact
with the stationary or mobile phase.
Compounds that may co-elute and cause extraneous
peaks & interfere with the detection and
quantification.
These columns must be changed on a regular basis in
order to optimize their protectiveness.
52
53. DERIVATIZING COLUMN
Derivatization involves a chemical reaction between an
analyte and a reagent to change the chemical and
physical properties of an analyte.
The four main uses of derivatization in HPLC are:
Improve detectability,
Change the molecular structure or polarity of analyte
for better chromatography,
Change the matrix for better separation,
Stabilize a sensitive analyte.
53
54. Pre or post primary column derivatization can be done.
Derivatization techniques includes –acetylation,
silylation, acid hydrolysis.
Disadvantages: It becomes a complex procedure
and so it acts as a source of error to analysis and
increases the total analysis time.
Advantages: Although derivatization has
drawbacks, it may still be required to solve a specific
separation or detection problem.
54
55. CAPILLARY COLUMNS:
HPLC led to smaller analytical columns called as
micro-columns, capillary columns which have
diameter less than a millimeter.
Sample used – is in nanolitre volumes, decreased flow
rate, decreased solvent volume usage which leads to
cost effectiveness.
Disadvantage:- since it is miniatured flow rate is
difficult to produce & gradient elution is not efficient.
55
56. MICROBORE and SMALLBORE columns are also used
for analytical and small volumes assay.
Diameter of small-bore columns is 1-2mm.
The instrument must also be modified to accommodate
these smaller capacity columns.
FAST COLUMNS:
This column also have the same internal diameter but
much shorter length than most other columns & packed
with particles of 3µm in diameter.
Increased sensitivity, decreased analysis time, decreased
mobile phase usage & increased reproducibility.
56
57. ANALYTICAL COLUMN:
This is the most important part of HPLC which decides
the efficiency of separation
Length- 5 to 25 cm ,Internal Diameter 3 to 5mm.
Particle size of packing material is 3 to 5µm.
LC columns achieve separation by different
intermolecular forces b/w the solute & the stationary
phase and those b/w the solute & mobile phase.
57
58. PREPARATORY COLUMN:
Length – 10 to 15 cm, Int. diameter – 4.6mm
Packed with particles having 5µm as diameter.
Columns of this time generate 10,000 plates per
column.
It consists of back pressure regulator and fraction
collector.
This back pressure regulator is placed posterior to the
HPLC detector.
58
59. SAMPLE INJECTOR SYSTEM:
Several injector devices are available either for manual
or auto injection of the sample.
(i) Septum Injector
(ii)Stop Flow Injector
(iii)Rheodyne Injector
59
Rheodyne Manual injector
60. (i)Septum Injector:
These are used for injecting the sample through a
rubber septum.
This kind of injectors cannot be commonly used
, since the septum has to withstand high pressures.
(ii)Stop Flow(On Line):
In this type the flow of mobile phase is stopped for a
while & the sample is injected through a valve.
60
61. (iii)RHEODYNE INJECTOR:
It is the most popular injector and is widely used.
This has a fixed volume of loop, for holding sample until
its injected into the column, like 20µL, 50µL or more.
Through an injector the sample is introduced into the
column.
The injector is positioned just before the inlet of the
column.
61
62. SELECTION VALVE:
By using the selection
valve we can select
whether the purpose is for
analytical purpose or
preparative purpose.
INJECT POSITION: In
this position the loaded
sample is injected into
the column by the forcful
flow of the solvent into
the sample loop by which
the sample is introduced
into the column.
LOAD POSITION:
In this position the
sample is loaded into
the sample loop .
62
67. Column temperature controller:
For obtaining better and reproducible chromatograms
constant column temperature should be maintained.
Some are equipped with heaters that control
temperatures to a few tenths of a degree from near
ambient.
Columns may also be fitted with water jackets fed from
a constant temperature bath to give precise temperature
control.
For some applications, close control of column
temperature is not necessary & columns are operated at
R.T
67
68. TYPES OF
DETECTORS
General – respond to
mob phase bulk
properties which vary
in the presence of
solutes. (e.g. refractive
index)
Specific – respond to
some specific property
of the solute (not
possessed by the mob
phase (e.g. UV
absorption)
“Hyphenated” detector
– LC-MS
68
70. DETECTORS:
Absorbance (UV/Vis or PDA)
Refractive index (detects the change in turbidity)
Fluorescence (if the analyte is fluorescent)
Electrochemical (measures current flowing through a pair
of electrodes, on which a potential difference is
imposed, due to oxidation or reduction of solute)
Conductivity (for ions)
Light scattering
Mass spectrometry (HPLC-MS)
70
71. 71
Selection of Detectors
Detectors Type of compounds can be detected
UV-Vis & PDA
Compounds with chromophores, such as aromatic
rings or multiple alternating double bonds.
RF
Fluorescent compounds, usually with fused rings or
highly conjugated planar system.
CDD
Charged compounds, such as inorganic ions and
organic acid.
ECD For easily oxidized compounds like quinones or amines.
RID & ELSD
For compounds that do not show characteristics usable
by the other detectors, eg. polymers, sccharides.
72. ABSORBANCE DETECTORS:
The UV/Vis source usually comes from a
monochromator so the wavelength can be
selected, or scanned.
If wavelength scanning is desired, the flow is
stopped long enough for the scan to take place.
Fixed wavelength-measures at single wavelength
usually 254nm.
Variable wavelength-measures at single
wavelength at a time but can detect over a wide
range of wavelengths simultaneously. 72
75. Detection occurs when the light is bent due to
samples eluting from the columns, and this is read
as a disparity b/w the two channels.
It is not much used for analytical applications
because of low sensitivity & specificity.
When a solute is in the sample
compartment, refractive index changes will shift
the light beam from the detector.
75
76. FLUORIMETRIC DETECTORS:
It is based on the fluorescent radiation emitted by some
compounds.
The excitation source passes through the flow cell to a
photodetector while a monochromator measures the
emission wavelengths.
More sensitive and specific.
The disadvantge is that most compounds are not
fluorescent in nature.
76
77. 77
Fluorescence is a type of luminescence in which the light energy is
released in the form of a photon in nanoseconds to microseconds
S1
T1
S0
Light absorption
Non-radiation transition
Non-radiation transition
Fluorescence
Phosphorescence
Fluorescence of Compounds
79. 79
Fluorescence Detector
Advantage
• Sensitivity is higher than UV-Vis detector
• Selectivity is high because relatively few compounds
fluorescence
• Compatible with gradient elution
Disadvantage
• Difficult to predict fluorescence
• Greatly affected by environment
– Solvent
– pH
– Temperature
– Viscosity
– Ionic strength
– Dissolved gas
80. AMPEROMETRIC DETECTOR:
Amperometric detectors works based on the reducing and
oxidizing property of the sample when a potential is
applied.
The diffusion current recorded is directly proportional to
the concentration of the compound recorded.
DISADVANTAGE: This detector is applicable only when the
functional groups present in the sample can be either
oxidized or reduced.
ADVANTAGE: Highly sensitive detector.
80
82. 82
Instrumentation of UV-Vis Detector
Sample Cell
Reference Cell
Photodiode
Photodiode
Ein
EoutEin
Grating
Light source
D2 / W lamp
Eout
M2
M1
83. 83
Ultraviolet / Visible Detector
Advantage:
• Sensitivity is high
• Relative robust to temperature and flow rate change
• Compatible with gradient elution
Disadvantage:
• Only compounds with UV or visible absorption could be detected.
Additional Functions
• Dual Wavelength mode
• Wavelength Time Program mode
• Wavelength Scan mode
84. PHOTODIODE ARRAY DETECTORS:
This is a recent detector which is similar to UV
detector which operates from 190-600nm.
Radiations of all wavelength fall on the detector
simultaneously.
The resulting spectra is a three dimensional plot of
Response Vs Time Vs Wavelength.
ADVANTAGE: The wavelength need not be selected
but detector detects the responses of all compounds.
84
86. RECORDERS AND INTEGRATORS:
Recorders are used to record responses obtained from
the detectors after amplification,if necessary.
They record the baseline & all the peaks obtained with
respect tot ime.
Retention time can be found out from this
recordings,but area under curve cannot be determined.
86
87. INTEGRATORS:
These are improved versions of recorders with some
data processing capabilities.
They can record the individual peaks with retention
time,height,width of peaks,peak area,percentage
area,etc.
Integrators provides more information on peaks than
recorders.
In recent days computers and printers are used for
recording and processing the obtained data & for
controlling several operations.
87
92. REFERENCE:
Gurdeep R. Chatwal, Sham K. Anand, Instrumental
Method Of Chemical Analysis, Himalaya Publishing
House, 2003, p. 2.624 to 2.638
P.D Sethi, Quantitative Analysis Of Pharmaceutical
Preparations .
Douglas A. Skoog, Instrumental Analysis, Brooks/Cole,
2007, p. 897 to 899
Dr. S Ravi Shankar, Textbook Of Pharmaceutical
Analysis, Rx Publications, 2005, p. 18-1 to 18-11
Robert D. Braun, Introduction Instrumental Analysis,
Pharma Book Syndicate, 2006, p. 860 to 863
www.google.com
92