This document describes a technique to prevent power theft using a static device. It aims to control voltage across a load by monitoring incoming voltage and calculating firing angles for a TRIAC. The system includes a microcontroller, zero crossing detector, TRIAC, driver circuit, and potential transformer. It can provide a constant output voltage between 210-240V even if the input voltage varies from 230-300V. For illegal consumers using banned hooks or bypassing the meter, it will provide an output of 300V to potentially damage their devices and prevent theft. The system aims to reduce theft losses for power companies and stabilize supply voltages.
SCADA for remote industrial plant project is used to process the real time data acquisition under supervisory control for large scale remote industries.
Here my project theme is to monitor and control Transformer health using Arduino, as we all know there are both internal and external faults occur in the transformer, for internal faults we use Buchholz relay and Differential protection relay for external but it is not efficient with time. so,we use Arduino for real time protection, here we fix some values to the Arduino in the program itself according to the rating of the transformer by that we monitor and control whenever the faults occur
SCADA for remote industrial plant project is used to process the real time data acquisition under supervisory control for large scale remote industries.
Here my project theme is to monitor and control Transformer health using Arduino, as we all know there are both internal and external faults occur in the transformer, for internal faults we use Buchholz relay and Differential protection relay for external but it is not efficient with time. so,we use Arduino for real time protection, here we fix some values to the Arduino in the program itself according to the rating of the transformer by that we monitor and control whenever the faults occur
Elspec G4420 Blackbox Fixed Power Quality Analyzer- Elspec G4000 BLACKBOX is the next generation in power quality analyzers. No Triggers/No Thresholds meaning no missed events at anytime. The G4K provides accurate detection and isolation of power quality monitoring.
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/product/elspec-g4420-blackbox-fixed-power-quality-analyzer.aspx?Id=297&ProductType=New
This paper describe the design and
implementation of an “Automatic method of protecting
transformer as an alternative to the fuse protection technique”.
The aim of this paper is to provide an alternative, effective,
efficient and more reliable method of protecting fault from
power transformer which may arose as a result of overload,
high temperature or a high input voltage. Generally, fault may
occur in transformers due to the stated reasons. To safeguard
the damage of the transformer with the aid and help of
microcontroller we monitor and control the entire circuitry.
Thereafter regarding the monitoring and control, information
about the operation of the parameters would be transmitted to a
personal computer for general monitoring and control, which
avoid the need of the lines men who had to go to the transformer
to re-fix fuses. Lastly, a working system was demonstrated to
authenticate the design and possible improvements were also
presented.
HIOKI POWER QUALITY ANALYZER PQ3198, PQ3100
IEC61000-4-30 Ed.2 Class A Power Quality Analyzer
• Advanced monitoring and recording
POWER QUALITY ANALYZER PQ3198
Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The new and improved PQ3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. New features include the ability to drive current sensors straight from the PQA and enhanced recording capabilities.
https://www.n-denkei.com/singapore/inquiry/
AUTOMATIC VOLTAGE CONTROL OF TRANSFORMER USING MICROCONTROLLER AND SCADA Ajesh Jacob
AUTOMATIC VOLTAGE CONTROL OF TRANSFORMER USING MICROCONTROLLER AND SCADA
LABVIEW PROJECT FINAL YEAR EEE
ABSTRACT: A tap changer control operates to connect appropriate tap position of winding in power transformers to maintain correct voltage level in the power transmission and distribution system. Automatic tap changing can be implemented by using µC. This improved tap-changing decision and operational flexibility of this new technique make it attractive for deployment in practical power system network. This paper deals with the implementation of µC based tap changer control practically, using special purpose digital hardware as a built-in semiconductor chip or software simulation in conventional computers. Two strategies are suggested for its implementation as a software module in the paper. One is to integrate it with the supervisory system in a substation control room operating in a LAN environment. In this configuration, the parallel transformers can be controlled locally. The other is to integrate it into the SCADA (Supervisory Control and Data Acquisition) system, which allows the transformers to be monitored and controlled remotely over a wide area of power-network. The implementation of µC based tap changer control needs interfacing between the power system and the control circuitry. µC s may need to interact with people for the purpose of configuration, alarm reporting or everyday control.
A human-machine interface (HMI) is employed for this purpose. An HMI is usually linked to the SCADA system’s databases and software programs, to provide trending, diagnostic data, and management information such as scheduled maintenance procedures, logistic information, detailed schematics for a particular sensor or machine, and expert-system troubleshooting guides.
OBJECTIVES: The original system can afford the following features:
- Complete information about the plant (circuit breakers status, source of feeding, and level of the consumed power).
- Information about the operating values of the voltage, operating values of the transformers, operating values of the medium voltage, load feeders, operating values of the generators. These values will assist in getting any action to return the plant to its normal operation by minimum costs.
- Information about the quality of the system (harmonics, current, voltages, power factors, flickers, etc.). These values will be very essential in case of future correction.
- Recorded information such case voltage spikes, reducing the voltage on the medium or current interruption.
- implementation of µC based tap changer control practically, using special purpose digital hardware as a built-in semiconductor chip or software simulation in conventional computers.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Transformer Parameters Monitoring System using MATLAB SimulinkDr. Amarjeet Singh
Transformer is an important component of an
electrical distribution system. Hence it is important to
monitor transformers for problems before faults occur. This
system is about design and implementation of embedded
system to monitor and record key parameters of a
distribution transformer like load currents,voltage and
temperature. It is installed at the distribution transformer
site and the above parameters are recorded using the analog
to digital converter (ADC) of the embedded system. The
obtained parameters are processed and recorded in the
system memory. If any abnormality or an emergency
situation occurs the system takes immediate action to avoid it.
This system will help the transformers to operate smoothly
and identify problems before any failure. proposed system is
low cost, easy to use capable of monitoring and displaying
data using matlab[1,6].
Elspec G4420 Blackbox Fixed Power Quality Analyzer- Elspec G4000 BLACKBOX is the next generation in power quality analyzers. No Triggers/No Thresholds meaning no missed events at anytime. The G4K provides accurate detection and isolation of power quality monitoring.
Available for sales, rentals, hire and lease @ http://www.supremetechnology.com.au/product/elspec-g4420-blackbox-fixed-power-quality-analyzer.aspx?Id=297&ProductType=New
This paper describe the design and
implementation of an “Automatic method of protecting
transformer as an alternative to the fuse protection technique”.
The aim of this paper is to provide an alternative, effective,
efficient and more reliable method of protecting fault from
power transformer which may arose as a result of overload,
high temperature or a high input voltage. Generally, fault may
occur in transformers due to the stated reasons. To safeguard
the damage of the transformer with the aid and help of
microcontroller we monitor and control the entire circuitry.
Thereafter regarding the monitoring and control, information
about the operation of the parameters would be transmitted to a
personal computer for general monitoring and control, which
avoid the need of the lines men who had to go to the transformer
to re-fix fuses. Lastly, a working system was demonstrated to
authenticate the design and possible improvements were also
presented.
HIOKI POWER QUALITY ANALYZER PQ3198, PQ3100
IEC61000-4-30 Ed.2 Class A Power Quality Analyzer
• Advanced monitoring and recording
POWER QUALITY ANALYZER PQ3198
Hioki portable power meters and analyzers are best in class power measuring instruments for measuring single to three-phase lines with a high degree of precision and accuracy. The new and improved PQ3198 is a power quality analyzer for monitoring and recording power supply anomalies, allowing their causes to be quickly investigated, and also for assessing power supply problems such as voltage drops, flicker, harmonics, and other electrical issues. New features include the ability to drive current sensors straight from the PQA and enhanced recording capabilities.
https://www.n-denkei.com/singapore/inquiry/
AUTOMATIC VOLTAGE CONTROL OF TRANSFORMER USING MICROCONTROLLER AND SCADA Ajesh Jacob
AUTOMATIC VOLTAGE CONTROL OF TRANSFORMER USING MICROCONTROLLER AND SCADA
LABVIEW PROJECT FINAL YEAR EEE
ABSTRACT: A tap changer control operates to connect appropriate tap position of winding in power transformers to maintain correct voltage level in the power transmission and distribution system. Automatic tap changing can be implemented by using µC. This improved tap-changing decision and operational flexibility of this new technique make it attractive for deployment in practical power system network. This paper deals with the implementation of µC based tap changer control practically, using special purpose digital hardware as a built-in semiconductor chip or software simulation in conventional computers. Two strategies are suggested for its implementation as a software module in the paper. One is to integrate it with the supervisory system in a substation control room operating in a LAN environment. In this configuration, the parallel transformers can be controlled locally. The other is to integrate it into the SCADA (Supervisory Control and Data Acquisition) system, which allows the transformers to be monitored and controlled remotely over a wide area of power-network. The implementation of µC based tap changer control needs interfacing between the power system and the control circuitry. µC s may need to interact with people for the purpose of configuration, alarm reporting or everyday control.
A human-machine interface (HMI) is employed for this purpose. An HMI is usually linked to the SCADA system’s databases and software programs, to provide trending, diagnostic data, and management information such as scheduled maintenance procedures, logistic information, detailed schematics for a particular sensor or machine, and expert-system troubleshooting guides.
OBJECTIVES: The original system can afford the following features:
- Complete information about the plant (circuit breakers status, source of feeding, and level of the consumed power).
- Information about the operating values of the voltage, operating values of the transformers, operating values of the medium voltage, load feeders, operating values of the generators. These values will assist in getting any action to return the plant to its normal operation by minimum costs.
- Information about the quality of the system (harmonics, current, voltages, power factors, flickers, etc.). These values will be very essential in case of future correction.
- Recorded information such case voltage spikes, reducing the voltage on the medium or current interruption.
- implementation of µC based tap changer control practically, using special purpose digital hardware as a built-in semiconductor chip or software simulation in conventional computers.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Transformer Parameters Monitoring System using MATLAB SimulinkDr. Amarjeet Singh
Transformer is an important component of an
electrical distribution system. Hence it is important to
monitor transformers for problems before faults occur. This
system is about design and implementation of embedded
system to monitor and record key parameters of a
distribution transformer like load currents,voltage and
temperature. It is installed at the distribution transformer
site and the above parameters are recorded using the analog
to digital converter (ADC) of the embedded system. The
obtained parameters are processed and recorded in the
system memory. If any abnormality or an emergency
situation occurs the system takes immediate action to avoid it.
This system will help the transformers to operate smoothly
and identify problems before any failure. proposed system is
low cost, easy to use capable of monitoring and displaying
data using matlab[1,6].
Design Smart Energy Meter to Prevention of Power Theft and Automatic Billingijtsrd
In developing countries like India, power theft is one of the most prevalent issues which not only cause economic losses but also an irregular supply of electricity. An Electricity meter or Energy Meter is a device that measures the amount of electrical energy consumed by a residence, business or an electrical power device. A Smart Energy Meter to control under voltage or overvoltage and it’s prevented power theft in line. The lower range of under voltage is 180 V and the higher range of overvoltage is 280 V and output should be constant between 220 V-240 V is constant continuously. If any consumer meter get bypass or tapping illegally that time connected all the equipment should be damaged with the help of changing the transformer tapping in substation that time the voltage should be more high as a rated supply voltage. The transformer changes the tapping time is not fixed in our days it depends on our supply authority. The energy consumed by the consumer and they paid equivalent amount will be shown on the LED 16 2 display continuously the consumer not paid a monthly bill then after 10 days of month the supply will be disconnect automatically and by consumer paid bill then the informed with the help of supply authority’s server. Prof. C. J. Sharma | Akash B. Khatik | Apekshit A. Ramteke | Aniket S. Askar "Design Smart Energy Meter to Prevention of Power Theft and Automatic Billing" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-3 , April 2022, URL: https://www.ijtsrd.com/papers/ijtsrd49761.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/49761/design-smart-energy-meter-to-prevention-of-power-theft-and-automatic-billing/prof-c-j-sharma
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.