(2) Drafting Materials and Tools by Mary Krystle Dawn D. Sulleza
•Download as PPTX, PDF•
3 likes•2,238 views
Hard and soft surface drawing papers are recommended for drafting. Pencils need to be sharpened when dull and come in various grades depending on the type of line work and paper. Common drafting tools include T-squares, triangles, compasses, protractors, and erasers which are used to accurately draw lines, arcs, circles, and erase mistakes.
Report
Share
Report
Share
Recommended
Drafting Tools and Materials
This document discusses various drafting materials and tools, including types of drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils, triangular scales, erasing shields, T-squares, triangles, compasses, dividers, and protractors. It provides details on the uses and functions of each tool, such as hard drawing pencils being used for accuracy and soft pencils being used for art work. Masking tape is used to fasten paper without damage, and different types of erasers are suited to removing marks or making corrections. T-squares are used for horizontal lines while triangles are used with T-squares for vertical lines. Compasses and dividers are used for drawing
tools, supplies, materials and equipment in mechanical drafting
This document discusses tools, supplies, materials, and equipment used in mechanical drafting. It describes common drafting tools like pencils, erasers, rulers, protractors, compasses, dividers, T-squares, triangles, and scales. It also mentions materials like drawing paper and tape. Equipment for mechanical drafting includes drawing tables. The document provides details on the types and uses of different tools, such as hard versus soft pencils, fixed versus adjustable T-squares, and 30-60 and 45-45 triangle styles. It aims to educate readers on the core items used for drafting.
Mechanical Drafting
Drafting is a way for technical people to communicate designs and ideas through technical drawings using lines and symbols. This document discusses drafting tools, materials, and basic skills needed for drafting. It aims to familiarize students with tools like the T-square, triangles, compass, and their uses; teach basic technical drawing techniques; and promote safety practices for work in a drafting laboratory. The goal is to help students master the drafting competencies required for their grade level.
Drafting tools and equipment
The document provides definitions and descriptions of various drafting tools and equipment used for technical drawing. It discusses drawing boards, T-squares, parallel bars, drafting machines, triangles, pencils, pens, compasses, scales, erasers, protractors, French curves, drafting tape, adjustable triangles, templates, and procedures for receiving, requisitioning, purchasing, borrowing, and inventory of drafting supplies. The purpose is to teach students about these tools, their uses in technical drawing, and related procedures.
Common drafting tools and materials
This document lists and describes common drafting tools and materials used for mechanical drawing. It includes pencils, rulers, triangles, protractors, compasses, French curves, templates, scales, erasers, tapes, drawing boards, inks, papers, and adhesives. Each tool has a specific function in completing a technical drawing, such as measuring, setting dimensions and angles, drawing straight and curved lines, and fastening the paper to the drawing board. Proficiency with these tools is necessary to produce accurate mechanical drawings.
TLE 8 - TECHNICAL DRAFTING (INTERPRET TECHNICAL DRAWINGS AND PLANS)
This document provides an overview of technical drawings and plans. It discusses different types of drawings including working drawings, pictorial drawings, orthographic projections, assembly drawings, and detailed drawings. It also covers topics such as isometric, oblique, and perspective drawings. Steps for sketching an isometric box are outlined. The importance of technical drawings for construction projects and proposals is emphasized. Dimensioning rules for technical drawings are also reviewed.
BASIC DRAFTING
This document provides an overview of technical drawing goals, materials, and techniques. It discusses the different types of drawings including orthographic, isometric, pictorial, axonometric, oblique, and perspective. Key aspects covered include types of lines used in drafting, lettering styles, guide lines, dimensions, and projection principles. The document serves as a basic introduction to technical drawing concepts, objectives, classifications, and methodologies.
TLE 8 - TECHNICAL DRAFTING (PERFORM BASIC MENSURATION AND CALCULATION)
The document discusses different measuring instruments used in technical drafting and their purposes. It lists common measuring tools like the compass, divider, protractor, triangles, T-square, ruler, tape ruler, and triangular scale. The document also provides examples of unit conversion calculations between millimeters and centimeters, and inches and meters.
Recommended
Drafting Tools and Materials
This document discusses various drafting materials and tools, including types of drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils, triangular scales, erasing shields, T-squares, triangles, compasses, dividers, and protractors. It provides details on the uses and functions of each tool, such as hard drawing pencils being used for accuracy and soft pencils being used for art work. Masking tape is used to fasten paper without damage, and different types of erasers are suited to removing marks or making corrections. T-squares are used for horizontal lines while triangles are used with T-squares for vertical lines. Compasses and dividers are used for drawing
tools, supplies, materials and equipment in mechanical drafting
This document discusses tools, supplies, materials, and equipment used in mechanical drafting. It describes common drafting tools like pencils, erasers, rulers, protractors, compasses, dividers, T-squares, triangles, and scales. It also mentions materials like drawing paper and tape. Equipment for mechanical drafting includes drawing tables. The document provides details on the types and uses of different tools, such as hard versus soft pencils, fixed versus adjustable T-squares, and 30-60 and 45-45 triangle styles. It aims to educate readers on the core items used for drafting.
Mechanical Drafting
Drafting is a way for technical people to communicate designs and ideas through technical drawings using lines and symbols. This document discusses drafting tools, materials, and basic skills needed for drafting. It aims to familiarize students with tools like the T-square, triangles, compass, and their uses; teach basic technical drawing techniques; and promote safety practices for work in a drafting laboratory. The goal is to help students master the drafting competencies required for their grade level.
Drafting tools and equipment
The document provides definitions and descriptions of various drafting tools and equipment used for technical drawing. It discusses drawing boards, T-squares, parallel bars, drafting machines, triangles, pencils, pens, compasses, scales, erasers, protractors, French curves, drafting tape, adjustable triangles, templates, and procedures for receiving, requisitioning, purchasing, borrowing, and inventory of drafting supplies. The purpose is to teach students about these tools, their uses in technical drawing, and related procedures.
Common drafting tools and materials
This document lists and describes common drafting tools and materials used for mechanical drawing. It includes pencils, rulers, triangles, protractors, compasses, French curves, templates, scales, erasers, tapes, drawing boards, inks, papers, and adhesives. Each tool has a specific function in completing a technical drawing, such as measuring, setting dimensions and angles, drawing straight and curved lines, and fastening the paper to the drawing board. Proficiency with these tools is necessary to produce accurate mechanical drawings.
TLE 8 - TECHNICAL DRAFTING (INTERPRET TECHNICAL DRAWINGS AND PLANS)
This document provides an overview of technical drawings and plans. It discusses different types of drawings including working drawings, pictorial drawings, orthographic projections, assembly drawings, and detailed drawings. It also covers topics such as isometric, oblique, and perspective drawings. Steps for sketching an isometric box are outlined. The importance of technical drawings for construction projects and proposals is emphasized. Dimensioning rules for technical drawings are also reviewed.
BASIC DRAFTING
This document provides an overview of technical drawing goals, materials, and techniques. It discusses the different types of drawings including orthographic, isometric, pictorial, axonometric, oblique, and perspective. Key aspects covered include types of lines used in drafting, lettering styles, guide lines, dimensions, and projection principles. The document serves as a basic introduction to technical drawing concepts, objectives, classifications, and methodologies.
TLE 8 - TECHNICAL DRAFTING (PERFORM BASIC MENSURATION AND CALCULATION)
The document discusses different measuring instruments used in technical drafting and their purposes. It lists common measuring tools like the compass, divider, protractor, triangles, T-square, ruler, tape ruler, and triangular scale. The document also provides examples of unit conversion calculations between millimeters and centimeters, and inches and meters.
Drafting tools and equipment
Drafting tools and equipment include T-squares, triangles, scales, compasses, protractors, templates, French curves, erasers, and paper. T-squares are used to draw horizontal and vertical lines while triangles are used to draw angles. Scales are used to measure and enlarge or reduce drawings. Compasses are used to draw circles and arcs. Protractors are used to measure angles from 0 to 360 degrees.
DRAFTING TOOLS, MATERIALS AND EQUIPMENT
This document provides information on tools, materials, and equipment used for technical drafting. It discusses various types of drawing papers, pencils, erasers, scales, templates, and other instruments like T-squares, triangles, compasses, and protractors. Drafting tables, stools, portable boards, and machines like blueprint machines and drafting machines are also drafting equipment described in the document. The tools, materials, and equipment outlined are essential for creating precise technical drawings.
Drafting tools
This document provides an overview of mechanical drafting tools and materials. It begins by listing objectives to explain drafting tool functions, illustrate tools, and appreciate their use. It then defines key drafting terms. The main body describes common drafting materials like paper, tape, pencil sharpeners, erasers, and pencils in various grades. It also details important drawing instruments such as T-squares, triangles, compasses, dividers, and protractors. It concludes by announcing a quiz and homework assignment requiring students to bring specific drafting supplies to the next class.
TLE 9 (Technical Drafting) - Lettering
Lettering is the process of forming letters, numerals, and other characters used in technical drawing. There are three main methods of lettering: freehand lettering done without tools, mechanical lettering done with tools like guides and templates, and modern drawing done with computer-aided software. The dimensions of letters are defined by their nominal size based on the height of uppercase letters, their center line which runs through the middle of each line element, and their lettering angle which can be vertical or inclined up to 75 degrees.
Mechanical drafting materials with assessment (e-quiz) for Grade 7 students
This document lists and describes various drafting materials, tools, and instruments used for mechanical drawing. It includes masking tape, drawing paper, pencils, erasers, sharpeners, T-squares, triangles, scales, compasses, dividers, protractors, rulers, and French curves. Each tool has a specific use, such as fastening paper, drawing lines, measuring, transferring measurements, or drawing circles and arcs. The document also contains questions to test the reader's understanding of the tools and their functions.
Drawing tools and materials
This document discusses the basic tools and materials used for drawing. It describes a drawing table and stool to provide a stable surface for drawing. A T-square is used to draw horizontal lines while triangles help draw vertical and angled lines. A ruler measures size and distance. Other tools include a ruling pen, compass, protractor, French curve, and drawing pencils, pens, and papers. Proper use of these tools allows for consistent, precise drawings.
DRAFTING MATERIALS AND TOOLS ITS USES/FUNCTIONS
This document provides an overview of common drafting materials and tools, their uses, and functions. It describes drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils in various grades, triangular scales, erasing shields, and common drawing instruments like T-squares, triangles, compasses, dividers, and protractors. The key tools are used for tasks like making horizontal and vertical lines, transferring measurements, drawing arcs and circles, and measuring angles and degrees. A variety of materials like paper, pencils, tape, and instruments in different designs are available to aid the drafting process.
TLE 9 (Technical Drafting) - Drafting Tools
It is a powerpoint presentation that discusses about the topic or lesson of the different Drafting Tools used in Technical Drafting. It also includes some characteristics on each tools.
Freehand drawing
This document provides an introduction to line sketching as part of a drafting lesson. It defines line sketching as drawing without drafting instruments using soft pencils and paper. The key aspects covered are that lines have length and direction, represent the edges of objects, and come in different weights and thicknesses. Specifically, it discusses three types of lines used in sketching: gestural lines that communicate feeling, contour lines that define form, and construction lines that use heavier lines to further define shapes.
Oblique drawing
An oblique drawing shows one view of an object without distortion by drawing receding surfaces at an angle. It is similar to an isometric drawing except two axes are perpendicular in an oblique drawing. There are three types of oblique drawings: cavalier oblique draws receding sides at true size, cabinet oblique scales them at half size, and general oblique uses two-thirds scale. To create an oblique drawing, one sets the axes, constructs guide boxes, transfers views, connects points to complete the object, then finalizes it by darkening lines and erasing extras.
sewing tools and equipments
This document provides information about various sewing tools and equipment, their classification, and uses. It discusses different types of measuring tools like tape measures and rulers, cutting tools like shears and seam rippers, marking tools like chalk and pens, and pinning tools like thimbles. It also lists common sewing tools under each category and provides details about their purposes. For example, it states that bent-handled dressmaker's shears are used for cutting fabrics and seam rippers are used for removing stitches. The document aims to educate about proper tool selection and application for sewing tasks.
Drawing tools
The document defines and describes various tools used for drafting and technical drawing, including:
- The T-square, which is used to guide horizontal and diagonal lines, and comes in fixed, movable, and removable versions.
- The compass, which draws circles and measures distances between points.
- The triangular scale, protractor, triangles, drawing paper, eraser, pencil sharpener, and drawing pencils in various grades.
- The divider, which measures, transfers and marks distances, and the masking tape and erasing shield also used for technical drawing.
LO1MaintainHandTools.pdf.pdf
The document provides instructions for properly maintaining drafting tools and equipment. It emphasizes the importance of cleaning tools regularly to remove dirt and residue, performing minor repairs when needed, and properly storing tools to prevent damage and extend their usable lifetime. Regular maintenance is key to ensuring tools work efficiently and accurately.
Carpentry
The document discusses carpentry, including that Jesus was a carpenter before his ministry. It describes basic carpentry materials like lumber, plywood, nails, screws, bolts and nuts. It also outlines various carpentry tools and equipment used for measuring, marking, cutting, planning, chiseling, driving, holding, sharpening and maintaining tools. Proper maintenance of tools, like cleaning, lubricating and sharpening, is important to ensure the tools work effectively.
Drafting equipment and_procedures
The document discusses drafting tools and procedures. It lists common tools used for drafting like a drawing board, T-square, triangles, protractor, compass, divider, templates, and architectural pencils. It also lists common drawing surfaces like drafting paper, vellum, and plastic film. Proper tools allow architects to create detailed working drawings that are needed before construction of a home or building.
D R A W I N G I N S T R U M E N T S, M A T E R I A L S,And E Q U I P M E N...
This document discusses drawing instruments, materials, and equipment used for technical drawing. It describes common tools like the T-square, triangles, scales, pencils, pens, dividers, compasses, protractors, French curves, and erasing shields. It provides details on the parts and proper use of each tool. The document also outlines the standard order of penciling and inking steps when creating a technical drawing.
TLE 9 (Technical Drafting) - Alphabet of Lines
This document describes the different types of lines used in technical drawings and sketches, known as the "alphabet of lines". It explains that lines have specific meanings based on their thickness, shape, and dash pattern. Some key line types include object lines for visible surfaces, hidden lines for non-visible surfaces, center lines, dimension lines with numeric values, and leader lines to connect dimensions to drawing features. The document provides examples of different line styles and their uses in technical drawings.
Miscellaneous carpentry tools
Oilstones and slipstones are used to sharpen cutting tools and irregular tools respectively. They should be stored in boxes or wrapped to protect them from dirt and damage. Various wrenches like adjustable, open-end, ring, pipe and monkey wrenches are used to tighten and loosen nuts and bolts in different applications. Pliers like bent nose, diagonal cutting, flat nose and slip joint pliers are used for specific tasks like holding, cutting wires and bolts. Carpentry tools include knives, putty knives, pincers, plug cutters, and counter sinks which are used for tasks like trimming, spreading putty, removing nails and preparing holes.
Classification of Hand Tools - PART 1
This document classifies and identifies various hand tools used in construction. It divides the tools into three categories: measuring tools, marking and lining tools, and testing tools. The measuring tools section identifies common tools like the push-pull rule, ruler, meter stick, try square, and caliper. The marking and lining tools section lists the pencil, marking gauge, chalk line, divider, and compass. The final section on testing tools mentions the try square, steel square, spirit level, and plumb bob.
Alphabet Of Lines
The document describes various line conventions used in technical drawings according to ANSI standards, including dark heavy lines to show outlines, light dashed lines for unseen features, section lines at 45 degrees to indicate cut areas, center lines of dashed and dotted patterns, dimension lines with arrowheads, broken lines for imaginary cuts, wavy lines to indicate hidden surfaces, removed center lines, and phantom lines made of long and short dashes for alternate positions, fitted parts, and repeated details.
Formatting content in_word_(part_2)
There are several ways to insert tables in Microsoft Word, including using preformatted table templates from the gallery, specifying the number of rows and columns using the Table menu, or using the Insert Table dialog box. Tables can also be drawn or created by converting text separated by commas or tabs. Cells can be split or merged and data in tables can be sorted, columns and rows added or deleted, and gridlines and header rows manipulated using the Table Tools options.
Triad 2010 word_chapter_2
This document provides an overview of formatting text and paragraphs in Word 2010. It discusses skills for applying character effects like bold, italics, and underline; changing fonts, font sizes, text case, and font colors; creating bulleted and numbered lists; adjusting paragraph alignment, spacing, and indents; and using tab stops and leaders. The document is formatted as a skills approach training manual with step-by-step instructions and screenshots for common text and paragraph formatting tasks in Word.
More Related Content
What's hot
Drafting tools and equipment
Drafting tools and equipment include T-squares, triangles, scales, compasses, protractors, templates, French curves, erasers, and paper. T-squares are used to draw horizontal and vertical lines while triangles are used to draw angles. Scales are used to measure and enlarge or reduce drawings. Compasses are used to draw circles and arcs. Protractors are used to measure angles from 0 to 360 degrees.
DRAFTING TOOLS, MATERIALS AND EQUIPMENT
This document provides information on tools, materials, and equipment used for technical drafting. It discusses various types of drawing papers, pencils, erasers, scales, templates, and other instruments like T-squares, triangles, compasses, and protractors. Drafting tables, stools, portable boards, and machines like blueprint machines and drafting machines are also drafting equipment described in the document. The tools, materials, and equipment outlined are essential for creating precise technical drawings.
Drafting tools
This document provides an overview of mechanical drafting tools and materials. It begins by listing objectives to explain drafting tool functions, illustrate tools, and appreciate their use. It then defines key drafting terms. The main body describes common drafting materials like paper, tape, pencil sharpeners, erasers, and pencils in various grades. It also details important drawing instruments such as T-squares, triangles, compasses, dividers, and protractors. It concludes by announcing a quiz and homework assignment requiring students to bring specific drafting supplies to the next class.
TLE 9 (Technical Drafting) - Lettering
Lettering is the process of forming letters, numerals, and other characters used in technical drawing. There are three main methods of lettering: freehand lettering done without tools, mechanical lettering done with tools like guides and templates, and modern drawing done with computer-aided software. The dimensions of letters are defined by their nominal size based on the height of uppercase letters, their center line which runs through the middle of each line element, and their lettering angle which can be vertical or inclined up to 75 degrees.
Mechanical drafting materials with assessment (e-quiz) for Grade 7 students
This document lists and describes various drafting materials, tools, and instruments used for mechanical drawing. It includes masking tape, drawing paper, pencils, erasers, sharpeners, T-squares, triangles, scales, compasses, dividers, protractors, rulers, and French curves. Each tool has a specific use, such as fastening paper, drawing lines, measuring, transferring measurements, or drawing circles and arcs. The document also contains questions to test the reader's understanding of the tools and their functions.
Drawing tools and materials
This document discusses the basic tools and materials used for drawing. It describes a drawing table and stool to provide a stable surface for drawing. A T-square is used to draw horizontal lines while triangles help draw vertical and angled lines. A ruler measures size and distance. Other tools include a ruling pen, compass, protractor, French curve, and drawing pencils, pens, and papers. Proper use of these tools allows for consistent, precise drawings.
DRAFTING MATERIALS AND TOOLS ITS USES/FUNCTIONS
This document provides an overview of common drafting materials and tools, their uses, and functions. It describes drawing paper, masking tape, pencil sharpeners, erasers, drawing pencils in various grades, triangular scales, erasing shields, and common drawing instruments like T-squares, triangles, compasses, dividers, and protractors. The key tools are used for tasks like making horizontal and vertical lines, transferring measurements, drawing arcs and circles, and measuring angles and degrees. A variety of materials like paper, pencils, tape, and instruments in different designs are available to aid the drafting process.
TLE 9 (Technical Drafting) - Drafting Tools
It is a powerpoint presentation that discusses about the topic or lesson of the different Drafting Tools used in Technical Drafting. It also includes some characteristics on each tools.
Freehand drawing
This document provides an introduction to line sketching as part of a drafting lesson. It defines line sketching as drawing without drafting instruments using soft pencils and paper. The key aspects covered are that lines have length and direction, represent the edges of objects, and come in different weights and thicknesses. Specifically, it discusses three types of lines used in sketching: gestural lines that communicate feeling, contour lines that define form, and construction lines that use heavier lines to further define shapes.
Oblique drawing
An oblique drawing shows one view of an object without distortion by drawing receding surfaces at an angle. It is similar to an isometric drawing except two axes are perpendicular in an oblique drawing. There are three types of oblique drawings: cavalier oblique draws receding sides at true size, cabinet oblique scales them at half size, and general oblique uses two-thirds scale. To create an oblique drawing, one sets the axes, constructs guide boxes, transfers views, connects points to complete the object, then finalizes it by darkening lines and erasing extras.
sewing tools and equipments
This document provides information about various sewing tools and equipment, their classification, and uses. It discusses different types of measuring tools like tape measures and rulers, cutting tools like shears and seam rippers, marking tools like chalk and pens, and pinning tools like thimbles. It also lists common sewing tools under each category and provides details about their purposes. For example, it states that bent-handled dressmaker's shears are used for cutting fabrics and seam rippers are used for removing stitches. The document aims to educate about proper tool selection and application for sewing tasks.
Drawing tools
The document defines and describes various tools used for drafting and technical drawing, including:
- The T-square, which is used to guide horizontal and diagonal lines, and comes in fixed, movable, and removable versions.
- The compass, which draws circles and measures distances between points.
- The triangular scale, protractor, triangles, drawing paper, eraser, pencil sharpener, and drawing pencils in various grades.
- The divider, which measures, transfers and marks distances, and the masking tape and erasing shield also used for technical drawing.
LO1MaintainHandTools.pdf.pdf
The document provides instructions for properly maintaining drafting tools and equipment. It emphasizes the importance of cleaning tools regularly to remove dirt and residue, performing minor repairs when needed, and properly storing tools to prevent damage and extend their usable lifetime. Regular maintenance is key to ensuring tools work efficiently and accurately.
Carpentry
The document discusses carpentry, including that Jesus was a carpenter before his ministry. It describes basic carpentry materials like lumber, plywood, nails, screws, bolts and nuts. It also outlines various carpentry tools and equipment used for measuring, marking, cutting, planning, chiseling, driving, holding, sharpening and maintaining tools. Proper maintenance of tools, like cleaning, lubricating and sharpening, is important to ensure the tools work effectively.
Drafting equipment and_procedures
The document discusses drafting tools and procedures. It lists common tools used for drafting like a drawing board, T-square, triangles, protractor, compass, divider, templates, and architectural pencils. It also lists common drawing surfaces like drafting paper, vellum, and plastic film. Proper tools allow architects to create detailed working drawings that are needed before construction of a home or building.
D R A W I N G I N S T R U M E N T S, M A T E R I A L S,And E Q U I P M E N...
This document discusses drawing instruments, materials, and equipment used for technical drawing. It describes common tools like the T-square, triangles, scales, pencils, pens, dividers, compasses, protractors, French curves, and erasing shields. It provides details on the parts and proper use of each tool. The document also outlines the standard order of penciling and inking steps when creating a technical drawing.
TLE 9 (Technical Drafting) - Alphabet of Lines
This document describes the different types of lines used in technical drawings and sketches, known as the "alphabet of lines". It explains that lines have specific meanings based on their thickness, shape, and dash pattern. Some key line types include object lines for visible surfaces, hidden lines for non-visible surfaces, center lines, dimension lines with numeric values, and leader lines to connect dimensions to drawing features. The document provides examples of different line styles and their uses in technical drawings.
Miscellaneous carpentry tools
Oilstones and slipstones are used to sharpen cutting tools and irregular tools respectively. They should be stored in boxes or wrapped to protect them from dirt and damage. Various wrenches like adjustable, open-end, ring, pipe and monkey wrenches are used to tighten and loosen nuts and bolts in different applications. Pliers like bent nose, diagonal cutting, flat nose and slip joint pliers are used for specific tasks like holding, cutting wires and bolts. Carpentry tools include knives, putty knives, pincers, plug cutters, and counter sinks which are used for tasks like trimming, spreading putty, removing nails and preparing holes.
Classification of Hand Tools - PART 1
This document classifies and identifies various hand tools used in construction. It divides the tools into three categories: measuring tools, marking and lining tools, and testing tools. The measuring tools section identifies common tools like the push-pull rule, ruler, meter stick, try square, and caliper. The marking and lining tools section lists the pencil, marking gauge, chalk line, divider, and compass. The final section on testing tools mentions the try square, steel square, spirit level, and plumb bob.
Alphabet Of Lines
The document describes various line conventions used in technical drawings according to ANSI standards, including dark heavy lines to show outlines, light dashed lines for unseen features, section lines at 45 degrees to indicate cut areas, center lines of dashed and dotted patterns, dimension lines with arrowheads, broken lines for imaginary cuts, wavy lines to indicate hidden surfaces, removed center lines, and phantom lines made of long and short dashes for alternate positions, fitted parts, and repeated details.
What's hot (20)
Mechanical drafting materials with assessment (e-quiz) for Grade 7 students
Mechanical drafting materials with assessment (e-quiz) for Grade 7 students
D R A W I N G I N S T R U M E N T S, M A T E R I A L S,And E Q U I P M E N...
D R A W I N G I N S T R U M E N T S, M A T E R I A L S,And E Q U I P M E N...
Viewers also liked
Formatting content in_word_(part_2)
There are several ways to insert tables in Microsoft Word, including using preformatted table templates from the gallery, specifying the number of rows and columns using the Table menu, or using the Insert Table dialog box. Tables can also be drawn or created by converting text separated by commas or tabs. Cells can be split or merged and data in tables can be sorted, columns and rows added or deleted, and gridlines and header rows manipulated using the Table Tools options.
Triad 2010 word_chapter_2
This document provides an overview of formatting text and paragraphs in Word 2010. It discusses skills for applying character effects like bold, italics, and underline; changing fonts, font sizes, text case, and font colors; creating bulleted and numbered lists; adjusting paragraph alignment, spacing, and indents; and using tab stops and leaders. The document is formatted as a skills approach training manual with step-by-step instructions and screenshots for common text and paragraph formatting tasks in Word.
Formatting content in_word_2010
This document provides an overview of formatting options in Microsoft Word 2010, including:
1) Font formatting tools found on the Home ribbon such as font type, size, style, color, and other attributes.
2) The Format Painter tool, also on the Home ribbon, which copies formatting from selected text or graphics.
3) Applying styles from the Styles group to format headings and text consistently.
4) Paragraph formatting options on the Home and Page Layout ribbons for line spacing, indentation, and other layout attributes.
Word 2010 Unit B PPT
This document provides an overview of editing functions in Microsoft Word 2010, including cutting, copying, and pasting text; using the Office Clipboard; finding and replacing text; checking spelling and grammar; and inserting text using AutoCorrect. The objectives are explained over 21 pages with screenshots illustrating each function.
Lesson2 baking tools and equipment and their functions
The document discusses various baking tools and equipment, their functions, and types of ovens. It identifies measuring cups and spoons used to measure dry and wet ingredients. Mixers are described as equipment that uses beaters to prepare foods. Various pans and tools are outlined like rolling pins, cooling racks, and pastry brushes that aid in baking processes. Finally, different oven styles are covered such as deck, convection, and wood fired ovens used to bake goods.
Microsoft Word: Working with Tables
This is a quick tutorial on how to use tables in Microsoft Word. Tables can be very useful in legal documents, not only for organizing data but also for formatting captions.
7 3 measuring dry and liquid ingredients accurately
This document provides instructions for properly measuring ingredients for baking. It discusses measuring dry ingredients like flour and sugar by spooning into a measuring cup until overflowing and leveling with a spatula. It also covers measuring liquids like oil by pouring into a glass measuring cup up to the measurement line without lifting. Powdered ingredients like baking powder are leveled with a spatula after being dipped into. The document concludes by asking students to demonstrate measuring various ingredients like oil, sugar, baking powder, evaporated milk, and flour.
Oblique form 4
This document discusses oblique drawings and related concepts. It defines oblique lines as lines parallel to any oblique axis. It explains that objects not parallel to an oblique axis are non-oblique lines. Angles on object surfaces parallel to the front projection plane or receding plane are considered oblique angles. Circles parallel to the front projection plane appear at actual size, while on a receding plane they appear as ellipses. Arcs parallel to the projection plane show their true size. The document provides examples of constructing oblique drawings using the box method and exercises readers to redraw objects in cavalier and cabinet oblique drawings.
Common drafting tools and instruments
This document provides information on proper care and storage of drafting tools and materials. It recommends placing drawing paper in envelopes, providing individual storage for tools like T-squares and protractors, and keeping tools clean and dry. The document also traces the evolution of lettering from prehistoric pictographs to the Phoenician alphabet and discusses parts of a letter. Additionally, it provides background on embroidery in the Philippines, from ancient influences to its role in education. Different embroidery stitches and styles are described.
Pictorial Drawing
This document discusses different types of pictorial drawings including oblique, isometric, and perspective drawings. Oblique drawings can be cavalier or cabinet style and involve shortening receding lines at 45 degrees. Isometric drawings present a 3D object with all dimensions visible and undistorted using 3 sets of lines at 30 degree angles. Perspective drawings make objects appear smaller with distance using 1, 2, or 3 vanishing points to align lines. The document provides examples and steps for creating each type of pictorial drawing.
Creativity in drafting
This document discusses drafting tools, proper care of tools, lettering guidelines, evolution of lettering styles, alphabet of lines, and types of mensuration. It is divided into 7 lessons covering common drafting tools; care of tools such as cleaning and storage; vertical and lowercase lettering guidelines; Gothic, Roman, text, and italics lettering styles; visible, invisible, and other line types; English and metric measurement systems; and orthographic and isometric drawings.
Draw 111- mechanical drawing and orthographic drawing
This document provides information and instructions for creating mechanical drawings using orthographic projection. It begins by describing how to properly set up drawing tools, materials, and work space. It then explains the different types of lines used in drawings based on weight, construction, and meaning. The document outlines the principles of orthographic projection including the three standard views of front, top, and side. It provides details on how to construct each view by using construction lines and projecting geometric features between the views based on set principles. Sample exercises are included to demonstrate constructing multi-view orthographic drawings from given sketches.
How to draw isometric pictorial
The document provides step-by-step instructions for drawing an isometric pictorial using a T-square and 30/60 triangle. It describes starting with a horizontal base line and then constructing vertical and angled lines to build the shapes and dimensions of the pictorial using the tools. The steps are repeated to fully construct the pictorial view in isometric projection.
Engineering Drawing: Chapter 02 using drawing tools
1. The document discusses tools and techniques for technical drawing, including how to prepare drawing tools like pencils, paper, and compasses.
2. It provides instructions for using tools to draw various shapes and lines, such as circles, arcs, horizontal and vertical lines, and lines at various angles.
3. The document also covers applied geometry techniques for constructions like bisecting lines and angles, drawing parallels, perpendiculars, tangents, and solving problems in multiple steps.
Baking tools and equipment
1. The document discusses various types of baking equipment used in commercial bakeries and pastry shops including various pans for baking cakes, muffins, breads and more.
2. It describes different types of ovens used for baking such as deck ovens, rack ovens, mechanical ovens, and convection ovens.
3. The document also lists other baking tools and equipment used in commercial bakeries like measuring cups and spoons, mixing bowls, spatulas, whisks, and more.
Bread and Pastry Production (Baking Tools and Equipment and their Uses )
Bread and Pastry Production (Baking Tools and Equipment and their Uses ) plus the Evaluation by Mary Krystle Dawn D. Sulleza
Nail care tools and equipment
The document discusses various tools, equipment, and materials used for nail care. It provides descriptions of over 30 different items including cuticle pushers, nail files, foot spas, nail polishes, cotton, towels, chairs, tables, and sterilization equipment. All of these are necessary for performing services like manicures and pedicures.
Viewers also liked (20)
Lesson2 baking tools and equipment and their functions
Lesson2 baking tools and equipment and their functions
7 3 measuring dry and liquid ingredients accurately
7 3 measuring dry and liquid ingredients accurately
Draw 111- mechanical drawing and orthographic drawing
Draw 111- mechanical drawing and orthographic drawing
Engineering Drawing: Chapter 02 using drawing tools
Engineering Drawing: Chapter 02 using drawing tools
Bread and Pastry Production (Baking Tools and Equipment and their Uses )
Bread and Pastry Production (Baking Tools and Equipment and their Uses )
Aralin panlipunan modyul 21. pamahalaan at kapangyarihan (1)
Aralin panlipunan modyul 21. pamahalaan at kapangyarihan (1)
Similar to (2) Drafting Materials and Tools by Mary Krystle Dawn D. Sulleza
DRAFTING.pptx
Drafting is the universal language of industry and technology that uses lines and symbols to communicate technical designs. It involves creating drawings that represent 3D objects in 2D and show how something can be constructed from different angles. The basic tools for drafting include T-squares, triangles, compasses, protractors, pencils, erasers and other instruments. Drafting has evolved over time from animal hides and cave walls to various papers and now digital drafting using CAD software on computers.
tools and equipment.pptx
This document lists and describes various tools, supplies, materials and equipment used in mechanical drafting. It discusses drawing paper, masking tape, pencil sharpeners, drawing pencils in various grades, triangular scales, erasing shields, speed ballpens, sign pens, t-squares, triangles, compasses, dividers, protractors, staple guns, and drawing tables. Key tools include t-squares for drawing horizontal lines, triangles for vertical and oblique lines, compasses for circles and arcs, and protractors for measuring angles and degrees. Materials range from drawing pencils in hard, medium and soft grades to erasers, tapes and papers for drafting drawings.
vdocuments.mx_drafting-materials-and-tools-its-usesfunctions.pptx
This document provides an overview of common drafting materials and tools, their uses, and functions. It describes types of drawing paper, pencils in various grades for different purposes, erasers, pencil sharpeners, masking tape, triangular scales, an erasing shield, and common drawing instruments like T-squares, triangles, compasses, dividers, and protractors. The key drafting tools are used for tasks like making straight lines, curves, circles, measuring angles and transferring measurements.
drawing tools and accessories
This document provides an overview of common drawing tools and accessories, including: pencils of varying hardness for different purposes, erasers, drawing paper, t-squares, adhesive tape, set squares, sandpaper, compasses, circle templates, protractors, sharpeners, French curves. It also discusses how to classify and use pencils, as well as care and maintenance of drawing tools and sheets. Group members Aattif Javaid, Muhammad Kashif, Muhammad Mujahid, Waqas Ahmed, and Raza ul haq each contributed a section on specific tools.
Technical Drafting lesson 1.pptx
This document provides an overview of the basic tools and materials used for technical drafting. It describes 11 common tools: drawing paper, masking tape, pencil sharpener, eraser, drawing pencils, T-square, protractor, triangle, compass, ruler, and divider. For each tool, it explains the tool's purpose and sometimes variations in the tool. The key tools covered are drawing pencils (which come in hard, medium, and soft grades), T-squares (with fixed, movable, or detachable heads), and types of drawing paper.
TD W2 TOOLS NEW.pptx
This document discusses tools, materials, and equipment used for technical drafting. It describes common drafting tools like T-squares, triangles, protractors, compasses, and templates that are used to draw straight lines, curves, and measure angles. It also outlines materials like drawing pencils, erasers, paper, and ink pens. Equipment discussed includes drafting tables, stools, machines, and newer computer-aided design (CAD) software and hardware.
Standard principles of drawing ( tools & accessories).pptx
This document discusses the basic tools used for engineering drawings. It describes pencils ranging from 9H to 7B grades used for drawing, as well as a T-square for horizontal and vertical lines. Additional tools include a ruler, compass to draw circles, dividers to divide lines equally, and set squares for accurate angles. A drawing board or paper holds the paper securely in place while working.
Drafting tools, materials and equipment
This presentation was made to supplement learning in teaching drafting tools and materials. It is not the sole intention of the author to harm any organization, institution and individual. The author just wanted to inform.
1 SRI RANGA ITI ED 1ST&2ND CHAPTER.ppsx
The document provides an introduction to engineering drawing, including definitions and the purpose of engineering drawings. It discusses that engineering drawings are a universal language for engineers, conveying technical information graphically. It also lists the types of engineering drawings as orthographic, isometric, and freehand drawings. The document then describes various drawing instruments and aids used for engineering drawings, such as drawing boards, set squares, protractors, templates, and pencils. It provides details on the use and features of each tool.
Week-1-DRAFTING-TOOLS AND EQUIPMENTS.pptx
Mechanical drafting is the process of creating drawings to communicate how something can be constructed. Draftsmen use specialized tools like a drawing board, pencils, T-squares, triangles, compasses, dividers, ruling pens, templates, erasers and more to create clear technical drawings. Common drawing tools include hard and medium grade pencils for construction lines, T-squares for horizontal guidelines, triangles for angled lines, and templates for repeating shapes. Drafting requires precision tools and different mediums like ink, water color and drawing paper.
MyAP
Common drafting tools include a drawing board for securing paper, triangles for projecting lines at angles, a T-square for horizontal lines, a protractor for measuring angles, pencils for sketching and finalizing drawings, a French curve for irregular curves, a scale for resizing measurements, templates with standard shapes and designs, a compass for drawing circles and arcs, an eraser for removing mistakes, and drafting tape to fasten paper.
Technical Drawing tools
Topic: Basic Technical Drawing Measuring and tools
Research by: KM CLAUDIO
For students who take the subject Technical DRawing
Engineering drawing (drafting instruments) lesson 2
The document discusses various drafting instruments used in engineering drawing. It describes conventional tools like the drawing board, T-square, triangles, compass, protractor, templates, and pencils and pens in varying grades and sizes. It explains how to use each tool properly and the advantages they provide for creating precise engineering drawings.
Introduction to engineering graphics
1. Engineering drawing is a technique to create graphical representations containing dimensions, specifications and notes to transform abstract concepts into real world objects. It is used in industries like shipping, manufacturing and construction.
2. There are two main types of projection in engineering drawing: parallel projection and perspective projection.
3. Key tools used in engineering drawing include a T-square, compass, French curves, drafter, protractor, set square, pencils, triangles and scales. Accuracy, speed, legibility and neatness are important objectives.
Equipment and Material.pdf
This document provides information about various tools and equipment used for drawing, including:
- Pencils such as wood-cased pencils, traditional lead holders, and mechanical pencils. It describes the characteristics of different pencil lead weights.
- Technical pens that make lines of constant width for technical drawings.
- Other drawing instruments like compasses, scales, templates, T-squares, triangles, and curves that are used to aid in precise technical drawings.
- Additional tools like tracing paper, drafting tape, erasers, and drafting tables that help facilitate the drawing process.
Eng draw
1. Engineering drawing is the fundamental means of communication in engineering and is used to convey ideas and specify object shapes and sizes.
2. Drawing instruments like T-squares, set squares, compasses, and dividers are used to prepare drawings easily and accurately. Quality instruments are essential for achieving desirable accuracy.
3. Practice is important for learning engineering drawing - with more practice, students can attain not only subject knowledge but also speed and proficiency in drafting skills like accuracy, lettering, and neatness.
Drafting
This document provides information about and descriptions of various tools used for drafting and technical drawing, including a drawing table, drawing board, drawing pencils, t-square, set of drawing instruments, ruling pen, compass, dividers, protractor, triangular scale, French curve, eraser, erasing shield, drawing pens, template, drawing ink, drawing paper, and drawing tape. It explains how these tools are used to create technical drawings and blueprints.
Architectural Drafting Techniques and Materials.pptx
Graphic language is more effective than word language for technical drawings as it can describe the size, shape, and features of an object concisely and allow others to visualize it. The document discusses drafting standards, materials, and instruments. It explains that drawings are made up of graphics and words, with graphics mainly describing shapes and words providing details on size, location, and specifications. A variety of drawing materials like paper, pencils, tapes and instruments like boards, scales and templates are introduced for making accurate technical drawings.
Hand Drawing Techniques
The document discusses various techniques for instrument drawing and technical lettering. It covers topics such as common drawing equipment like drawing boards, T-squares, and triangles used to draw straight lines and specific angles. It also discusses drawing pencils, lead grades, and their applications for different line types. Specific techniques are covered for drawing horizontal and vertical lines, using a compass to draw circles, and sharpening compass leads. Guidelines are provided for pencil drawing, contrasting line weights, and single-stroke Gothic lettering.
Hele
Drafting is the process of creating technical drawings that specify dimensions, views, and other details needed to manufacture an object. Common tools used in drafting include:
1. A drawing board with a smooth surface to secure paper for drawing.
2. Triangles and T-squares to project horizontal and angled lines. Triangles are usually made of transparent celluloid while T-squares have a wooden blade and celluloid body.
3. A protractor made of celluloid plastic graduated from 0 to 360 degrees for measuring and drawing angles.
Similar to (2) Drafting Materials and Tools by Mary Krystle Dawn D. Sulleza (20)
vdocuments.mx_drafting-materials-and-tools-its-usesfunctions.pptx
vdocuments.mx_drafting-materials-and-tools-its-usesfunctions.pptx
Standard principles of drawing ( tools & accessories).pptx
Standard principles of drawing ( tools & accessories).pptx
Engineering drawing (drafting instruments) lesson 2
Engineering drawing (drafting instruments) lesson 2
Architectural Drafting Techniques and Materials.pptx
Architectural Drafting Techniques and Materials.pptx
More from Mary Krystle Dawn Sulleza
Organization and Management Lesson 5 Compensation or Wages by Mary Krystle Da...
Organization and Management Lesson 5 Compensation or Wages by Mary Krystle Da...Mary Krystle Dawn Sulleza
The document discusses various aspects of compensation including pay, benefits, performance reviews, incentives, and factors that influence compensation rates. It defines compensation as all forms of pay and benefits given to employees in exchange for their work. Compensation seeks to ensure pay is fair and commensurate with effort. A variety of internal and external factors shape an organization's compensation policies and rates.(1) Prepare Appetizers by Mary Krystle Dawn D. Sulleza
The document discusses the history and purpose of appetizers. It notes that appetizers originated in ancient Athens and were further developed by the Romans as aperitifs, which typically contained alcohol and were meant to aid digestion before a meal. By the 20th century, appetizers had moved from between the main course and dessert to preceding the main course. The rest of the document lists and describes various tools and equipment used in preparing appetizers, such as zesters, paring knives, mixing bowls, and containers of different sizes.
Canapes by Mary Krystle Dawn D. Sulleza
The document breaks down criteria for evaluation into four categories: taste, creativity, visual appeal, and time management. Each category is assigned a percentage of the total score, with creativity and visual appeal valued the most at 30% each, followed by taste at 20%, and time management at 20%.
History of Computer by Mary Krystle Dawn D. Sulleza
The document traces the history and development of computers and technology from the 19th century to the 1980s. It mentions many important figures and their contributions, such as Charles Babbage designing the first mechanical computer in the 1830s, Alan Turing developing computer science theory in the 1930s-40s, and companies like IBM, Apple, Microsoft, and Intel founding and developing pioneering computers and operating systems in the 1970s-80s. Overall it provides a high-level overview of the major developments in computing technology from the 1800s to the 1980s in about a paragraph of information.
COMMERCIAL COOKING (complete instructional material) By: Mary Krystle Dawn D....
COMMERCIAL COOKING (complete instructional material) By: Mary Krystle Dawn D....Mary Krystle Dawn Sulleza
COMMERCIAL COOKING (complete instructional material) By: Mary Krystle Dawn D. Sulleza, (TECHNOLOGY AND LIVELIHOOD EDUCATION, SENIOR HIGH SCHOOL EDUCATION, K-12)
Agricultural Crop Production Ppt. Presentation
This document defines various agricultural terms and tools. It describes farm equipment as machinery used for crop production and land preparation, while farm implements are accessories pulled by animals or farm vehicles. Farm tools are lighter objects used without animals or machinery. Various common hand tools are then listed and described, including hoes, rakes, shovels, and pruning shears. The document also provides examples of farm implements like plows and harrows, as well as farm equipment like tractors. It discusses farm inputs, labor, and basic calculations in agriculture.
Child Development (Infancy to Childhood)
1. Infancy is the stage when personality, social attachments, thinking and language first take shape.
2. Childhood refers to the time or state of being a child, the early stage in development.
3. Development refers to the biological, psychological and emotional changes that occur between birth and the end of adolescence.
Reflective Teaching powerpoint mkdds
Reflective teaching is a cyclical process that involves teachers reflecting on their observations, knowledge, and experience in order to effectively guide students. It involves self-observation, evaluation, and using reflections to plan future lessons. Key aspects of reflective teaching include taking time for reflection, encouraging students to recount their experiences, and using tools like journals, portfolios, and student feedback to guide reflections. Reflective teaching distinguishes teachers as educated professionals who can thoughtfully problem-solve and foster student learning.
Teachers Exchange Program
The document discusses three teacher exchange programs: 1) The Visiting International Faculty Program (VIF) which began 19 years ago to transform lives through international teacher exchange. The VIF believes all schools and students should be exposed to exchange teachers to develop global literacy. 2) The Fulbright Teacher Exchange Program which has helped over 23,000 teachers and administrators promote understanding between the US and other countries. 3) The Inter-African Teacher Exchanges which provides African teachers opportunities to learn from other African education systems through week-long visits to schools to observe, teach, and discuss with other teachers and write about their experiences.
MAKABAYAN: Selection and Preparation of Instructional Materials
1. The document discusses the selection and preparation of various types of instructional materials including audiovisual materials, non-projected visuals like charts and maps, projected visuals like slides and films, audio media, multimedia resources, simulations, books, and duplicated materials.
2. Key factors in selecting instructional materials include matching the materials to learning objectives, ensuring the instructor is familiar with the content, choosing materials appropriate for the teaching format and student abilities, and selecting based on contributions to learning rather than just availability or ease of use.
3. A variety of media should be used as no single medium is best for all purposes. Locally produced materials by instructors can significantly enhance learning.
Gagne's Conditions of Learning ppt.
Gagne's theory of instruction outlines nine instructional events that are meant to support different types of learning outcomes. The nine events are gaining attention, informing learners of objectives, stimulating recall of prior learning, presenting stimulus materials, providing guidance for learning, eliciting performance, providing feedback, assessing performance, and enhancing retention and transfer. Gagne also categorized five different types of learning outcomes - verbal information, intellectual skills, cognitive strategies, attitudes, and motor skills. Each learning outcome requires different instructional conditions and events.
Advance Organizer ppt.
An advance organizer is an instructional tool used before direct instruction of a new topic to help students connect new information to prior knowledge. It provides an overview of key concepts and relationships between ideas. Advance organizers were proposed by educational psychologist David Ausubel to help students incorporate new knowledge into existing cognitive structures. There are different types of advance organizers like expository, comparative, and graphic organizers. The advance organizer model involves three phases: presenting the organizer, presenting new material and linking it to the organizer, and strengthening cognitive organization through application and discussion. Advance organizers can help improve comprehension and retention of new concepts.
The Research Problem
This document discusses guidelines for selecting a research problem and formulating hypotheses. It defines key terms like research problem, assumption, hypothesis, and title. It provides guidelines for writing titles, selecting research topics, formulating general and specific research problems. It also discusses the different forms hypotheses can take and their purposes and functions in research.
Measures of Variability
This document discusses measures of variability, which refer to how spread out a set of data is. Variability is measured using the standard deviation and variance. The standard deviation measures how far data points are from the mean, while the variance is the average of the squared deviations from the mean. To calculate the standard deviation, you take the square root of the variance. This provides a measure of variability that is on the same scale as the original data. The standard deviation and variance are widely used statistical measures for quantifying the spread of a data set.
Social Indicators and Well-being
Social Indicators and Well-Being and Social Capital Religious Belief and Ethnic Entrepreneurship by Mary Krystle Dawn D. Sulleza
Technology and Family and Global Change
Technology refers to the collection of tools and procedures used by humans, including machinery, modifications, and arrangements. Engineering seeks to study and design new technologies. Technologies significantly affect humans' and other species' ability to control and adapt their environments. Examples of technologies include construction, medical, and information technologies.
Organizational Structure and Design
The document discusses different organizational designs including the mechanistic, organic, and matrix models. The mechanistic model emphasizes production and efficiency through specialization, centralization, and formalization. The organic model emphasizes adaptability through informality, decentralization, and simple structures. The matrix model superimposes product-based designs onto function-based designs. It discusses the advantages of matrix organizations and different forms they can take. The document also covers considerations for multinational organizational structures and boundaryless organizations that break down barriers.
More from Mary Krystle Dawn Sulleza (17)
Organization and Management Lesson 5 Compensation or Wages by Mary Krystle Da...
Organization and Management Lesson 5 Compensation or Wages by Mary Krystle Da...
(1) Prepare Appetizers by Mary Krystle Dawn D. Sulleza
(1) Prepare Appetizers by Mary Krystle Dawn D. Sulleza
History of Computer by Mary Krystle Dawn D. Sulleza
History of Computer by Mary Krystle Dawn D. Sulleza
COMMERCIAL COOKING (complete instructional material) By: Mary Krystle Dawn D....
COMMERCIAL COOKING (complete instructional material) By: Mary Krystle Dawn D....
MAKABAYAN: Selection and Preparation of Instructional Materials
MAKABAYAN: Selection and Preparation of Instructional Materials
Recently uploaded
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...Paris Salesforce Developer Group
Build the Next Generation of Apps with the Einstein 1 Platform.
Rejoignez Philippe Ozil pour une session de workshops qui vous guidera à travers les détails de la plateforme Einstein 1, l'importance des données pour la création d'applications d'intelligence artificielle et les différents outils et technologies que Salesforce propose pour vous apporter tous les bénéfices de l'IA.原版制作(Humboldt毕业证书)柏林大学毕业证学位证一模一样
原件一模一样【微信：bwp0011】《(Humboldt毕业证书)柏林大学毕业证学位证》【微信：bwp0011】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问微bwp0011
【主营项目】
一.毕业证【微bwp0011】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微bwp0011】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
一比一原版(爱大毕业证书)爱荷华大学毕业证如何办理
原版一模一样【微信：741003700 】【(爱大毕业证书)爱荷华大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(爱大毕业证书)爱荷华大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Unit -II Spectroscopy - EC I B.Tech.pdf
Chemical engineering and electronics engineering and chemical development of the day of the almighty paw paw paw
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Determination of Equivalent Circuit parameters and performance characteristic...
Includes the testing of induction motor to draw the circle diagram of induction motor with step wise procedure and calculation for the same. Also explains the working and application of Induction generator
FULL STACK PROGRAMMING - Both Front End and Back End
This ppt gives details about Full Stack Programming and its basics.
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
* Registration is currently open *
Call for Research Papers!!!
Free – Extended Paper will be published as free of cost.
3rd International Conference on Artificial Intelligence Advances (AIAD 2024)
July 13 ~ 14, 2024, Virtual Conference
Webpage URL: https://aiad2024.org/index
Submission Deadline: June 22, 2024
Submission System URL:
https://aiad2024.org/submission/index.php
Contact Us:
Here's where you can reach us : aiad@aiad2024.org (or) aiadconference@yahoo.com
WikiCFP URL: http://wikicfp.com/cfp/servlet/event.showcfp?eventid=180509©ownerid=171656
#artificialintelligence #softcomputing #machinelearning #technology #datascience #python #deeplearning #tech #robotics #innovation #bigdata #coding #iot #computerscience #data #dataanalytics #engineering #robot #datascientist #software #automation #analytics #ml #pythonprogramming #programmer #digitaltransformation #developer #promptengineering #generativeai #genai #chatgpt #artificial #intelligence #datamining #networkscommunications #robotics #callforsubmission #submissionsopen #deadline #opencall #virtual #conference
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
The Network on Chip (NoC) has emerged as an effective
solution for intercommunication infrastructure within System on
Chip (SoC) designs, overcoming the limitations of traditional
methods that face significant bottlenecks. However, the complexity
of NoC design presents numerous challenges related to
performance metrics such as scalability, latency, power
consumption, and signal integrity. This project addresses the
issues within the router's memory unit and proposes an enhanced
memory structure. To achieve efficient data transfer, FIFO buffers
are implemented in distributed RAM and virtual channels for
FPGA-based NoC. The project introduces advanced FIFO-based
memory units within the NoC router, assessing their performance
in a Bi-directional NoC (Bi-NoC) configuration. The primary
objective is to reduce the router's workload while enhancing the
FIFO internal structure. To further improve data transfer speed,
a Bi-NoC with a self-configurable intercommunication channel is
suggested. Simulation and synthesis results demonstrate
guaranteed throughput, predictable latency, and equitable
network access, showing significant improvement over previous
designs
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
Assistant Engineer (Chemical) Interview Questions.pdf
These are interview questions for the post of Assistant Engineer (Chemical)
Recently uploaded (20)
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
AI + Data Community Tour - Build the Next Generation of Apps with the Einstei...
Zener Diode and its V-I Characteristics and Applications
Zener Diode and its V-I Characteristics and Applications
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
1FIDIC-CONSTRUCTION-CONTRACT-2ND-ED-2017-RED-BOOK.pdf
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Determination of Equivalent Circuit parameters and performance characteristic...
Determination of Equivalent Circuit parameters and performance characteristic...
FULL STACK PROGRAMMING - Both Front End and Back End
FULL STACK PROGRAMMING - Both Front End and Back End
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
Call For Paper -3rd International Conference on Artificial Intelligence Advan...
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
A high-Speed Communication System is based on the Design of a Bi-NoC Router, ...
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
4. Mosca vol I -Fisica-Tipler-5ta-Edicion-Vol-1.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
Assistant Engineer (Chemical) Interview Questions.pdf
(2) Drafting Materials and Tools by Mary Krystle Dawn D. Sulleza
- 1. DRAFTING MATERIALS AND TOOLS, ITS USES/ FUNCTIONS
- 2. Various types of drawing papers are available for use but hard and soft surface drawing papers are highly recommended to be the best.
- 3. This type does not groove easily when pressure is applied to the pencil. Oslo paper is commonly used but bond paper is also recommended.
- 5. used for fastening the drawing paper on the drawing table or drawing board because it does not damage the board and it will not damage the paper if it is removed by pulling it off.
- 7. Pencils should be sharpened whenever they show sign of dullness.
- 9. used to clean the dirt off the drawing.
- 11. one of the most important tools in drawing. It comes in various grades.
- 12. The grade of pencil to be used depends on the quality of paper to be used. You have to take into consideration also the type of line work required.
- 13. are used where extreme accuracy is required especially working on graphs, diagrams and charts.
- 15. used for general purpose work in drawing.
- 17. are too soft to be used in mechanical drafting. They are very useful for art work of various kinds.
- 19. This is a tool generally used when reproducing a drawing in an enlarged or reduced form to some regular proportion.
- 21. This tool is made up of metal with irregular holes. It is a useful tool to protect the rest of the drawing when clearing up smudges, unnecessary pencil lines and other erasures
- 24. used for drawing and designing purposes.
- 25. used when making horizontal lines. It is also used for guiding triangles when drawing vertical lines.
- 28. The head is fastened to the blade. It is used for ordinary work.
- 29. It has one fixed and one adjustable head and used only for occasional drawing.
- 30. It is designed for comfort when carrying the T-square.
- 31. It is a three-sided ruler, which typically has two equal sides meeting at a 90 degree angle and to a third side at 45, 30, including 60 degree angles.
- 32. It is usually made of plastic and comes in different sizes. If in use, the base of the triangle must rest on the blade of the T-square. Drawing a line always starts from the point near the base going upward.
- 34. 1.) 30 degrees x 60 degrees 2.) 45 degrees x 45 degrees
- 35. used when drawing arcs and circles. It is used in a similar way to a divider
- 37. used when transferring measurements, dividing lines and arcs into the desired number of equal parts.
- 39. It is a semi-circular instrument divided into 180 equal parts, each of which is called a degree. It is used to determine gradations of the degrees when measuring arcs, angles and circles.