This document summarizes the five generations of computers from the 1940s to present. The first generation used vacuum tubes and were large, expensive, and unreliable. The second generation used transistors, which made computers smaller and more reliable. The third generation used integrated circuits, making computers faster, cheaper, and more versatile. The fourth generation began with microprocessors, resulting in smaller and more affordable personal computers. The fifth generation, still in development, aims to develop true artificial intelligence and natural language processing. Each generation brought improvements in size, cost, speed, and capabilities.
2.0 Introduction to Computer Science and ProgrammingAbdelrahman Hosny
This is an introduction to Computer Science and Programming for absolute beginners. Use these slides to start introducing some non-technical major students to the field of software development and computer programming.
2.0 Introduction to Computer Science and ProgrammingAbdelrahman Hosny
This is an introduction to Computer Science and Programming for absolute beginners. Use these slides to start introducing some non-technical major students to the field of software development and computer programming.
A presentation I made. If you think its good do hit the like button.
also tell me if I should make more. It is about generation of computers and how the computers have evolved over a period of time.
S.No Generation & Description
1 First Generation The period of the first generation: 1946-1959. Vacuum tube based.
2 Second Generation The period of the second generation: 1959-1965. Transistor-based.
3 Third Generation The period of the third generation: 1965-1971. Integrated Circuit based.
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
Embracing GenAI - A Strategic ImperativePeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
Basic Civil Engineering Notes of Chapter-6, Topic- Ecosystem, Biodiversity Green house effect & Hydrological cycle
Types of Ecosystem
(1) Natural Ecosystem
(2) Artificial Ecosystem
component of ecosystem
Biotic Components
Abiotic Components
Producers
Consumers
Decomposers
Functions of Ecosystem
Types of Biodiversity
Genetic Biodiversity
Species Biodiversity
Ecological Biodiversity
Importance of Biodiversity
Hydrological Cycle
Green House Effect
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Split Bills in the Odoo 17 POS ModuleCeline George
Bills have a main role in point of sale procedure. It will help to track sales, handling payments and giving receipts to customers. Bill splitting also has an important role in POS. For example, If some friends come together for dinner and if they want to divide the bill then it is possible by POS bill splitting. This slide will show how to split bills in odoo 17 POS.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
We all have good and bad thoughts from time to time and situation to situation. We are bombarded daily with spiraling thoughts(both negative and positive) creating all-consuming feel , making us difficult to manage with associated suffering. Good thoughts are like our Mob Signal (Positive thought) amidst noise(negative thought) in the atmosphere. Negative thoughts like noise outweigh positive thoughts. These thoughts often create unwanted confusion, trouble, stress and frustration in our mind as well as chaos in our physical world. Negative thoughts are also known as “distorted thinking”.
2. INDEX:
• INTRODUCTION
• FIRST GENERATION OF COMPUTER
• SECOND GENERATION OF COMPUTER
• THIRD GENERATION OF COMPUTER
• FOURTH GENERATION OF COMPUTER
• FIFTH GENERATION OF COMPUTER
• REFERENCE
3. INTRODUCTION
• The history of computer development is often
referred to in reference to the different generations of
computing devices. Each generation of computer is
characterized by a major technological development
that fundamentally changed the way computers
operate, resulting in increasingly smaller, cheaper,
more powerful and more efficient and reliable
devices.
4. First Generation of Computers
(1945-1956)
Image courtesy: http://www.computerhistory.org/
9/18/2016 4
• The period of first generation was 1945-1956.
• In 1937 the first electronic digital computer was built by
Mauchly and Echert First generation of computers started
with using vacuum tubes as the basic components for
memory and circuitry for CPU (Central Processing Unit).
• These tubes like electric bulbs produced a lot of heat and
were prone to frequent fusing of the installations, therefore,
were very expensive and could be afforded only by very large
organizations.
• Input was based on punched cards and paper
tape, and output was displayed on printouts
• First generation computers relied on machine language, the
lowest-level programming language understood by computers,
to perform operations.
5. The main features of First Generation are:
9/18/2016 5
• Vacuum tube technology
• Unreliable
• Very costly
• Generate lot of heat
• Slow Input/output device
• Huge size
• Need of A.C.
• Non-portable
6. Advantages
• Vacuum tubes were the only electronic component
available during those days.
• Vacuum tube technology made possible to make
electronic digital computers.
• These computers could calculate data in millisecond
9/18/2016 6
7. Disadvantages
• The computers were large in size.
• They consumed a large amount of
energy.
• They heated very soon due to
thousands of vacuum tubes.
• They were not very reliable.
• Air conditioning was required.
• Constant maintenance was required.
• Non-portable.
• Costly commercial production.
• Limited commercial use.
• Very slow speed.
• Limited programming capabilities.
• Used machine language only.
• Used magnetic drums which provide
very less data storage.
• Used punch cards for input.
• Not versatile and very faulty.
9/18/2016 7
8. Some computers of this generation were:
• ENIAC
• EDVAC
• UNIVAC
• IBM-701
• IBM-650
9/18/2016 8
9. Second Generation Computers
(1959-1965)
Image courtesy: http://www.ibm.com/us-en/
• The second generation computers used
transistors.
• The scientists at Bell laboratories developed
transistor in 1947.
• These scientists include John Barden,
William Brattain and William Shockley.
• The size of the computers was decreased
by replacing vacuum tubes with transistors.
• In this generation, magnetic cores were
used as primary memory and magnetic tape
and magnetic disks as secondary storage
devices.
9/18/2016 9
10. Advantages
• Smaller in size as compared to the first generation computers.
• The 2nd generation Computers were more reliable
• Used less energy and were not heated.
• Wider commercial use
• Better portability as compared to the first generation computers.
• Better speed and could calculate data in microseconds
• Used faster peripherals like tape drives, magnetic disks, printer etc.
• Used Assembly language instead of Machine language.
• Accuracy improved.
9/18/2016 10
11. Disadvantages
• Cooling system was required
• Constant maintenance was required
• Commercial production was difficult
• Only used for specific purposes
• Costly and not versatile
• Punch cards were used for input.
9/18/2016 11
12. The main features of second generation are:
• Use of transistors
• Reliable in comparison to first generation computers
• Smaller size as compared to first generation computers
• Generated less heat as compared to first generation computers
• Consumed less electricity as compared to first generation computers
• Faster than first generation computers
• Still very costly
9/18/2016 12
13. Some computers of this generation were:
• Ibm 1620- for scientific purpose
• IBM 1401 – FOR business application
• Cdc 3600- for medical purpose
9/18/2016 13
14. Third Generation Computers
(1965-1971)
Image courtesy: http://www.computerhistory.org/
• The Third generation computers used
the integrated circuits (IC).
• Jack Kilby developed the concept of integrated
circuit in 1958. It was an important invention in
the computer field.
• The first IC was invented and used in 1961. The
size of an IC is about ¼ square inch.
• A single IC chip may contain thousands of
transistors. The computer became smaller in
size, faster, more reliable and less expensive.
9/18/2016 14
15. The main features of third generation are:
• IC used
• More reliable in comparison to previous two generations
• Smaller size
• Generated less heat
• Faster
• Lesser maintenance
• Still costly
• A.C needed
• Consumed lesser electricity
• Supported high-level language
9/18/2016 15
16. Advantages
• Smaller in size as compared to previous generations.
• More reliable.
• Used less energy
• Produced less heat as compared to the previous two generations of computers.
• Better speed and could calculate data in nanoseconds.
• Used fan for heat discharge to prevent damage.
• Maintenance cost was low because hardware failure is rear.
• Totally general purpose
• Could be used for high-level languages.
• Good storage
• Versatile to an extent
• Less expensive
• Better accuracy
• Commercial production increased.
• Used mouse and keyboard for input.
Disadvantages
Air conditioning was required.
Highly sophisticated
technology required for the
manufacturing of IC chips.
9/18/2016 16
17. The examples of third generation computers are:
• IBM-360 series
• Honeywell-6000 series
• PDP(Personal Data Processor)
• IBM-370/168
• TDC-316
9/18/2016 17
18. Fourth Generation Computers
(1975-Present)
Image courtesy: http://www.computerhistory.org/
• The fourth generation computers started with the invention
of Microprocessor.
• The Microprocessor contains thousands of ICs. Ted
Hoff produced the first microprocessor in 1971 for Intel.
• It was known as Intel 4004. The technology of integrated
circuits improved rapidly.
• The LSI (Large Scale Integration) circuit and VLSI (Very Large
Scale Integration) circuit was designed.
• It greatly reduced the size of computer. The size of modern
Microprocessors is usually one square inch.
• It can contain millions of electronic circuits.
9/18/2016 18
19. The main features of fourth generation are:
• VLSI technology used
• Very cheap
• Portable and reliable
• Use of PC's
• Very small size
• Pipeline processing
• No A.C. needed
• Concept of internet was introduced
• Great developments in the fields of networks
• Computers became easily available
9/18/2016 19
20. Advantages
• More powerful and reliable than previous
generations.
• Small in size
• Fast processing power with less power
consumption
• Fan for heat discharging and thus to keep cold.
• No air conditioning required.
• Totally general purpose
• Commercial production
• Less need of repair.
• Cheapest among all generations
• All types of High level languages can be used in this
type of computers
•
• The latest technology is required for
manufacturing of Microprocessors.
• Very advance technology was required
to make the ICs.
• .Highly skilled staff was required for
manufacturing
Disadvantages
9/18/2016 20
21. Some computers of this generation were:
• IBM-360 series
• Honeywell-6000 series
• PDP(Personal Data Processor)
• IBM-370/168
• TDC-316
• Apple Macintosh
9/18/2016 21
22. Fifth Generation Computers
(Present & Beyond)
9/18/2016 22
Fifth generation computing devices, based on artificial intelligence, are still
in development, though there are some applications, such as voice
recognition, that are being used today.
The use of parallel processing and superconductors is
helping to make artificial intelligence a reality.
Quantum computation and molecular and nanotechnology will radically
change the face of computers in years to come.
The goal of fifth-generation computing is to develop devices that
respond to natural language input and are capable of learning and self-
organization.
23. The main features of fifth generation are:
• ULSI technology
• Development of true artificial intelligence
• Development of Natural language processing
• Advancement in Parallel Processing
• Advancement in Superconductor technology
• More user friendly interfaces with multimedia features
• Availability of very powerful and compact computers at cheaper rates
9/18/2016 23
24. • Desktop
• Laptop
• NoteBook
• UltraBook
• ChromeBook
9/18/2016 24
Some computer types of this generation are:
25. Advantages
• This type of computer is versatile device by which we can perform
various types of programme.
• Low cost than first, second and third generation Computer.
• High speed than first, second and third generation Computer.
• This computer have artificial intelligence.
9/18/2016 25
26. Disadvantages
• Technology is still under process and research on its viability is going
on.
• The speed, this technology is claiming seems difficult to achieve (in
future, it might be) because of the incompetent technological support
in most parts of the world.
• Many of the old devices would not be competent to 5G, hence, all of
them need to be replaced with new one — expensive deal.
• Developing infrastructure needs high cost.
• Security and privacy issue yet to be solved.
•
9/18/2016 26