This document summarizes a research paper on using brain-computer interfaces for home automation. It discusses how EEG signals collected from the brain can be used to control external devices without physical movement. The proposed system uses an OpenBCI board and EEG headset to collect brain signals in response to auditory tones. These signals are processed to determine commands, which are then sent to control smart home appliances like lights and fans through voice commands to an Alexa device. The system aims to help people with disabilities control their home environment through thought.
Brain computer interface based smart keyboard using neurosky mindwave headsetTELKOMNIKA JOURNAL
In the last decade, numerous researches in the field of electro-encephalo-graphy (EEG) and brain-computer-interface (BCI) have been accomplished. BCI has been developed to aid disabled/partially disabled people to efficiently communicate with the community. This paper presents a control tool using the Neurosky Mindwave headset, which detects brainwaves (voluntary blinks and attention) to form a brain-computer interface (BCI) by receiving the system signals from the frontal lobe. This paper proposed an alternative computer input device for those disabled people (who are physically challenged) rather than the conventional one. The work suggested to use two virtual keyboard designs. The conducted experiment revealed a significant result in developing user printing skills on PCs. Encouraging results (1.55-1.8 word per minute (WPM)) were obtained in this research in comparison to other studies.
One-day system authentication could be widely achieved through brainwaves. One doesn’t need to remember that 8 or more character long strange password. Simply thinking of certain things, such as a person face, or a rotating displayed cube, or line of song would be enough to unlock a device. Electro-encephalography (EEC) sensors are behind the technique. That is where electrical activity in certain parts of the brain is recorded. These sensors are used to generate the graphical lines on charts created from wired electrodes placed on the scalp, as seen in hospitals and TV shows. They are used in hospital to diagnose epilepsy, among other things. In this case, though, one wouldn’t need to be fitted with wired electrodes —or even a headset, which is used already in some current non-muscular EEC computer controls. An ear bud will collect the signals (mental gesture) and perform secure authentication. This research could provide hands-free and wireless interaction, authentication, and user experience, all in the form-factor of a typical ear bud.
A brain-computer interface sometimes called a direct neural interface or a brain-machine interface is a direct communication pathway between a human or animal brain(or brain cell culture) and an external device. In one BCIs, computers either accept commands from the brain or send signals to it but not both. Two-way BCIs will allow brains and external devices to exchange information in both directions but have yet to be successfully implanted in animals or humans.
2. Partially Invasive BCI: Partially invasive BCI devices are implanted inside the skull but rest outside the brain rather than amidst the grey matter. They produce better resolution signals than non-invasive BCIs where the bone tissue of the cranium deflects and deforms signals and have a lower risk of forming scar tissue in the brain than fully-invasive BCIs.
3. Non-Invasive BCI: Magnetoencephalography (MEG) and functional magnetic resonance imaging (fMRI) have both been used successfully as non-invasive BCIs.
There are three types of BCI
1. Inversive BCI: - Invasive BCI is directly implanted into the grey matter of the brain during neurosurgery. They produce the highest quality signals of BCI devices. Invasive BCIs has targeted repairing damaged sight and providing new functionality to paralysed people.
Brain computer interface based smart keyboard using neurosky mindwave headsetTELKOMNIKA JOURNAL
In the last decade, numerous researches in the field of electro-encephalo-graphy (EEG) and brain-computer-interface (BCI) have been accomplished. BCI has been developed to aid disabled/partially disabled people to efficiently communicate with the community. This paper presents a control tool using the Neurosky Mindwave headset, which detects brainwaves (voluntary blinks and attention) to form a brain-computer interface (BCI) by receiving the system signals from the frontal lobe. This paper proposed an alternative computer input device for those disabled people (who are physically challenged) rather than the conventional one. The work suggested to use two virtual keyboard designs. The conducted experiment revealed a significant result in developing user printing skills on PCs. Encouraging results (1.55-1.8 word per minute (WPM)) were obtained in this research in comparison to other studies.
One-day system authentication could be widely achieved through brainwaves. One doesn’t need to remember that 8 or more character long strange password. Simply thinking of certain things, such as a person face, or a rotating displayed cube, or line of song would be enough to unlock a device. Electro-encephalography (EEC) sensors are behind the technique. That is where electrical activity in certain parts of the brain is recorded. These sensors are used to generate the graphical lines on charts created from wired electrodes placed on the scalp, as seen in hospitals and TV shows. They are used in hospital to diagnose epilepsy, among other things. In this case, though, one wouldn’t need to be fitted with wired electrodes —or even a headset, which is used already in some current non-muscular EEC computer controls. An ear bud will collect the signals (mental gesture) and perform secure authentication. This research could provide hands-free and wireless interaction, authentication, and user experience, all in the form-factor of a typical ear bud.
A brain-computer interface sometimes called a direct neural interface or a brain-machine interface is a direct communication pathway between a human or animal brain(or brain cell culture) and an external device. In one BCIs, computers either accept commands from the brain or send signals to it but not both. Two-way BCIs will allow brains and external devices to exchange information in both directions but have yet to be successfully implanted in animals or humans.
2. Partially Invasive BCI: Partially invasive BCI devices are implanted inside the skull but rest outside the brain rather than amidst the grey matter. They produce better resolution signals than non-invasive BCIs where the bone tissue of the cranium deflects and deforms signals and have a lower risk of forming scar tissue in the brain than fully-invasive BCIs.
3. Non-Invasive BCI: Magnetoencephalography (MEG) and functional magnetic resonance imaging (fMRI) have both been used successfully as non-invasive BCIs.
There are three types of BCI
1. Inversive BCI: - Invasive BCI is directly implanted into the grey matter of the brain during neurosurgery. They produce the highest quality signals of BCI devices. Invasive BCIs has targeted repairing damaged sight and providing new functionality to paralysed people.
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
The locomotive disabled people and elderly people cannot control the wheelchair manually. The key
objective of this paper is to help the locomotive disabled and old people to easily manoeuvre without any social
aid through a brainwave-controlled wheelchair. There are various types of wheelchair available in the market
such as Voice controlled wheelchair, Joystick control wheelchair, Smart phone controlled wheelchair, Eye
controlled wheelchair, Mechanical wheelchair. These wheelchairs hold certain limitations for e.g. if the user is
dumb; user cannot access voice controlled wheelchair, etc. Brain-computer interface (BCI) is a new method used
to interface between the human mind and a digital signal processor. An Electroencephalogram (EEG) based BCI
is connected with an artificial reality system to control the movement and direction of a wheelchair. This paper
proposes brainwave controlled wheelchair, which uses the captured EEG signals from the brain. This EEG
signals are then passed to Arduino. It converts into control signals which will in turn help to move the wheelchair
in different direction.
International Journal of Computational Engineering Research(IJCER) is an intentional online Journal in English monthly publishing journal. This Journal publish original research work that contributes significantly to further the scientific knowledge in engineering and Technology.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Computational Engineering Research(IJCER)ijceronline
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
The locomotive disabled people and elderly people cannot control the wheelchair manually. The key
objective of this paper is to help the locomotive disabled and old people to easily manoeuvre without any social
aid through a brainwave-controlled wheelchair. There are various types of wheelchair available in the market
such as Voice controlled wheelchair, Joystick control wheelchair, Smart phone controlled wheelchair, Eye
controlled wheelchair, Mechanical wheelchair. These wheelchairs hold certain limitations for e.g. if the user is
dumb; user cannot access voice controlled wheelchair, etc. Brain-computer interface (BCI) is a new method used
to interface between the human mind and a digital signal processor. An Electroencephalogram (EEG) based BCI
is connected with an artificial reality system to control the movement and direction of a wheelchair. This paper
proposes brainwave controlled wheelchair, which uses the captured EEG signals from the brain. This EEG
signals are then passed to Arduino. It converts into control signals which will in turn help to move the wheelchair
in different direction.
MILA: Low-cost BCI framework for acquiring EEG data with IoTTELKOMNIKA JOURNAL
The brain is a vital organ in the human body that acts as the center of the human nervous system. Brain-computer interface (BCI) uses electroencephalography (EEG) signals as information on brain activity. Hospitals usually use EEG as a diagnosis of brain disease. Combining EEG as part of IoT (Internet of Things) with high mobility is challenging research. This research tries to make a low-cost BCI framework for motorcycle riders. Analysis of brain activity from EEG data when motorcycle riders turn left or turn right. Therefore, the method of further installation must produce the right features to obtain precise and accurate brainwave characteristics from EEG signals. This research uses the concept of IoT with software engineering to recording human brain waves so that it becomes a practical device for the wearer. The purpose of this study is to create a low-cost BCI framework for obtaining EEG Data.
A SMART BRAIN CONTROLLED WHEELCHAIR BASED MICROCONTROLLER SYSTEMgerogepatton
The main objective of this paper is to build Smart Brain Controlled wheelchair (SBCW) intended for patient of Amyotrophic Lateral Sclerosis (ALS). Brain control interface (BCI) gave solutions for a patients having a low rate of data exchange, alsoby using the BCIthe user should have the ability to meditate and tension to let the signal get received. Using the BCI continuously is very much exhausted for the patients, Theproposed system is trying to give all handicapped people and ALS patients the simplest way to let them have a life at least near to the normal life. The system will mainly depend on the Electroencephalogram (EEG) signalsand also on the Electromyography (EMG) signals to put the system in command and out of command. The system will interface with user through a tablet and it will be secured by sensors and tracking system to avoid any obstacle. The proposed system is safe and easily built with lower cost compared with other similar systems
A SMART BRAIN CONTROLLED WHEELCHAIR BASED MICROCONTROLLER SYSTEMijaia
The main objective of this paper is to build Smart Brain Controlled wheelchair (SBCW) intended for patient of Amyotrophic Lateral Sclerosis (ALS). Brain control interface (BCI) gave solutions for a patients having a low rate of data exchange, alsoby using the BCIthe user should have the ability to meditate and tension to let the signal get received. Using the BCI continuously is very much exhausted for the patients, Theproposed system is trying to give all handicapped people and ALS patients the simplest way to let them have a life at least near to the normal life. The system will mainly depend on the Electroencephalogram (EEG) signalsand also on the Electromyography (EMG) signals to put the system in command and out of command. The system will interface with user through a tablet and it will be secured by sensors and tracking system to avoid any obstacle. The proposed system is safe and easily built with lower cost compared with other similar systems.
System Architecture for Brain-Computer Interface based on Machine Learning an...ShahanawajAhamad1
Brain functions are required to be read for curing
neurological illness. Brain-Computer Interface (BCI) connects
the brain to the digital world for brain signals receiving,
recording, processing, and comprehending. With a BrainComputer Interface (BCI), the information from the user’s brain
is fed into actuation devices, which then carry out the actions
programmed into them. The Internet of Things (IoT) has made it
possible to connect a wide range of everyday devices.
Asynchronous BCIs can benefit from an improved system
architecture proposed in this paper. Individuals with severe
motor impairments will particularly get benefit from this feature.
Control commands were translated using a rule-based
translation algorithm in traditional BCI systems, which relied
only on EEG recordings of brain signals. Examining BCI
technology’s various and cross-disciplinary applications, this
argument produces speculative conclusions about how BCI
instruments combined with machine learning algorithms could
affect the forthcoming procedures and practices. Compressive
sensing and neural networks are used to compress and
reconstruct ECoG data presented in this article. The neural
networks are used to combine the classifier outputs adaptively
based on the feedback. A stochastic gradient descent solver is
employed to generate a multi-layer perceptron regressor. An
example network is shown to take a 50% compression ratio and
89% reconstruction accuracy after training with real-world,
medium-sized datasets as shown in this paper
As the power of modern computers grows alongside our understanding of the human brain, we move ever closer to making some pretty spectacular science fiction into reality. Imagine transmitting signals directly to someone's brain that would allow them to see, hear or feel specific sensory inputs. Consider the potential to manipulate computers or machinery with nothing more than a thought. It isn't about convenience, for severely disabled people, development of a brain-computer interface (BCI) could be the most important technological breakthrough in decades.
A Brain-computer interface, sometimes called a direct neural interface or a brain-machine interface, is a direct communication pathway between a brain and an external device. It is the ultimate in development of human-computer interfaces or HCI. BCIs being the recent development in HCI there are many realms to be explored. After experimentation three types of BCIs have been developed namely Invasive BCIs, Partially-invasive BCIs, Non-invasive BCIs.
Brain Computer Interface (BCI) aims at providing an alternate means of communication and control to people with severe cognitive or sensory-motor disabilities. These systems are based on the single trial recognition of different mental states or tasks from the brain activity. This paper discusses the major components involved in developing a Brain Computer Interface system which includes the modality to obtain brain signals and its related processing methods.
Applying Brain Computer Interface Technology for Playing GamesDr. Amarjeet Singh
Brain Computer Interfaces are specialized systems that allows users to control computer applications using their brain waves. Initially, BCI were mostly used in medical field. But after some research and thanks to consumer-grade electroencephalography (EEG) devices, many applications and research opportunities were opened outside of the medical field. One particular area that is gaining more evidence due to the arrival consumer-grade devices is that of computer games, as it allows more user-friendly applications of BCI technology for the general public. In this report, we are going to talk about one of those games, Maze game. It will be a 2D maze, path known to the user. Using the EEG device named Neurosky Brain Wave Kit user will be able to move the avatar in order to reach the goal from the starting position.
In this presentation, Raunak talks about an innovative project on "Brain Computer Interface". This project uses signal processing, analytics and databases. The project has the potential to transform the lives of disabled.
Impact of adaptive filtering-based component analysis method on steady-state ...IAESIJAI
The significance of brain computer interface (BCI) systems is immensely high, especially for disabled people and patients with nervous system failure. Therefore, in this study, adaptive filtering-based component analysis (AFCA) model is presented to enhance target box identification efficiency at varied flickering frequencies in a visual stimulation process by efficient acquisition of electroencephalogram (EEG) signals for the application of steady-state visually evoked potential based BCI system. Furthermore, optimization of proposed AFCA model is performed based on the maximized reproducibility of correlated components. A multimedia authoring and management using your eyes and mind (MAMEM) steady-state visual evoked potential (SSVEP) dataset is utilized for efficient training of EEG signals and background entities are eliminated using adaptive filters in a pre-processing stage. Additionally, spatial filtering components are obtained to detect target flickering box based on the obtained quality features. Performance is measured by acquisition of SSVEP signals in terms of reconstruction efficiency, classification accuracy and information transfer rate (ITR) using proposed AFCA model. Mean classification accuracy for all 11 subject is 93.48% and ITR is 308.23 bpm. Further, classification accuracy is relatively higher than various SSVEP classification algorithms.
Similar to IRJET- Survey on Home Automation System using Brain Computer Interface Paradigm based on Auditory Selection Attention (20)
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
CW RADAR, FMCW RADAR, FMCW ALTIMETER, AND THEIR PARAMETERSveerababupersonal22
It consists of cw radar and fmcw radar ,range measurement,if amplifier and fmcw altimeterThe CW radar operates using continuous wave transmission, while the FMCW radar employs frequency-modulated continuous wave technology. Range measurement is a crucial aspect of radar systems, providing information about the distance to a target. The IF amplifier plays a key role in signal processing, amplifying intermediate frequency signals for further analysis. The FMCW altimeter utilizes frequency-modulated continuous wave technology to accurately measure altitude above a reference point.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.