This document presents a theoretical framework for modeling molecular electronics on silicon substrates. It combines a first-principles description of molecules with a semi-empirical treatment of silicon's bulk band structure. The framework is used to demonstrate negative differential resistance in a molecular resonant tunneling diode when molecular levels are driven by an STM tip into silicon's band gap. Specifically, it shows negative differential resistance peaks for styrene molecules on p-doped silicon at positive biases, and potentially for negative biases on n-doped silicon. This molecular resonant tunneling effect could enable new types of logic and memory devices integrating molecules with silicon technology.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
Effect of mesh grid structure in reducing hot carrier effect of nmos device s...ijcsa
This paper presents the critical effect of mesh grid that should be considered during process and device
simulation using modern TCAD tools in order to develop and optimize their accurate electrical
characteristics. Here, the computational modelling process of developing the NMOS device structure is
performed in Athena and Atlas. The effect of Mesh grid on net doping profile, n++, and LDD sheet
resistance that could link to unwanted “Hot Carrier Effect” were investigated by varying the device grid
resolution in both directions. It is found that y-grid give more profound effect in the doping concentration,
the junction depth formation and the value of threshold voltage during simulation. Optimized mesh grid is
obtained and tested for more accurate and faster simulation. Process parameter (such as oxide thicknesses
and Sheet resistance) as well as Device Parameter (such as linear gain “beta” and SPICE level 3 mobility
roll-off parameter “ Theta”) are extracted and investigated for further different applications.
Simulation and Modeling of Silicon Based Single Electron TransistorIJECEIAES
In this work, we simulated and modeled silicon quantum dot based single electron transistor (SET). We simulated the device using non-equilibrium Green’s function (NEGF) formalism in transport direction coupled with Schrodinger equation in transverse directions. The characteristics of SET such as Coulomb blockade and Coulomb diamonds were observed. We also present a new efficient model to calculate the current voltage (IV) characteristics of the SET. The IV characteristic achieved from the model are very similar to those from simulations both in shape and magnitude. The proposed model is capable of reproducing the Coulomb diamond diagram in good agreement with the simulations. The model, which is based on transmission spectrum, is simple, efficient and provides insights on the physics of the device. The transmission spectrum at equilibrium is achieved from simulations and given as input to the model. The model then calculates the evolved transmission spectra at non-equilibrium conditions and evaluates the current using Landauers formula.
Design and modeling of solenoid inductor integrated with FeNiCo in high frequ...TELKOMNIKA JOURNAL
In this work, the design and modeling of the solenoid inductor are discussed. The layout of integrated inductors with magnetic cores and their geometrical parameters are developed. The quality factor Q and inductance value L are derived from the S-parameters and plotted versus frequency. The effect of solenoid inductor geometry on inductance and quality factor are studied via simulation using MATLAB. The solenoid inductor geometry parameters considered are the turn’s number, the magnetic core length, the width of a magnetic core, the gap between turns, the magnetic core thickness, the coil thickness, and solenoid inductor oxide thickness. The performance of the proposed solenoid inductor integrated with FeNiCo is compared with other solenoid inductors.
Dynamic design and simulation analysis of permanent magnet motor in different...Mellah Hacene
This paper deals with investigation on non purely sinusoidal input supply analysis of line-start PMM using finite element analysis (FEA), in the present times a greater awareness is generated by the problems of harmonic voltages and currents produced by non-linear loads like the power electronic converters. These combine with non-linear nature of PMM core and produce severe distortions in voltages and currents and increase the power loss, additional copper losses due to harmonic currents, increased core losses, electromagnetic interference with communication circuits, efficiency reduction, increased in motors temperature and torque oscillations. In addition to the operation of PMM on the sinusoidal supplies, the harmonic behavior becomes important as the size and rating of the PMM increases. Thus the study of harmonics is of great practical significance in the operation of PMM.
International Journal of Engineering Research and Applications (IJERA) is a team of researchers not publication services or private publications running the journals for monetary benefits, we are association of scientists and academia who focus only on supporting authors who want to publish their work. The articles published in our journal can be accessed online, all the articles will be archived for real time access.
Our journal system primarily aims to bring out the research talent and the works done by sciaentists, academia, engineers, practitioners, scholars, post graduate students of engineering and science. This journal aims to cover the scientific research in a broader sense and not publishing a niche area of research facilitating researchers from various verticals to publish their papers. It is also aimed to provide a platform for the researchers to publish in a shorter of time, enabling them to continue further All articles published are freely available to scientific researchers in the Government agencies,educators and the general public. We are taking serious efforts to promote our journal across the globe in various ways, we are sure that our journal will act as a scientific platform for all researchers to publish their works online.
Effect of mesh grid structure in reducing hot carrier effect of nmos device s...ijcsa
This paper presents the critical effect of mesh grid that should be considered during process and device
simulation using modern TCAD tools in order to develop and optimize their accurate electrical
characteristics. Here, the computational modelling process of developing the NMOS device structure is
performed in Athena and Atlas. The effect of Mesh grid on net doping profile, n++, and LDD sheet
resistance that could link to unwanted “Hot Carrier Effect” were investigated by varying the device grid
resolution in both directions. It is found that y-grid give more profound effect in the doping concentration,
the junction depth formation and the value of threshold voltage during simulation. Optimized mesh grid is
obtained and tested for more accurate and faster simulation. Process parameter (such as oxide thicknesses
and Sheet resistance) as well as Device Parameter (such as linear gain “beta” and SPICE level 3 mobility
roll-off parameter “ Theta”) are extracted and investigated for further different applications.
Simulation and Modeling of Silicon Based Single Electron TransistorIJECEIAES
In this work, we simulated and modeled silicon quantum dot based single electron transistor (SET). We simulated the device using non-equilibrium Green’s function (NEGF) formalism in transport direction coupled with Schrodinger equation in transverse directions. The characteristics of SET such as Coulomb blockade and Coulomb diamonds were observed. We also present a new efficient model to calculate the current voltage (IV) characteristics of the SET. The IV characteristic achieved from the model are very similar to those from simulations both in shape and magnitude. The proposed model is capable of reproducing the Coulomb diamond diagram in good agreement with the simulations. The model, which is based on transmission spectrum, is simple, efficient and provides insights on the physics of the device. The transmission spectrum at equilibrium is achieved from simulations and given as input to the model. The model then calculates the evolved transmission spectra at non-equilibrium conditions and evaluates the current using Landauers formula.
Design and modeling of solenoid inductor integrated with FeNiCo in high frequ...TELKOMNIKA JOURNAL
In this work, the design and modeling of the solenoid inductor are discussed. The layout of integrated inductors with magnetic cores and their geometrical parameters are developed. The quality factor Q and inductance value L are derived from the S-parameters and plotted versus frequency. The effect of solenoid inductor geometry on inductance and quality factor are studied via simulation using MATLAB. The solenoid inductor geometry parameters considered are the turn’s number, the magnetic core length, the width of a magnetic core, the gap between turns, the magnetic core thickness, the coil thickness, and solenoid inductor oxide thickness. The performance of the proposed solenoid inductor integrated with FeNiCo is compared with other solenoid inductors.
Dynamic design and simulation analysis of permanent magnet motor in different...Mellah Hacene
This paper deals with investigation on non purely sinusoidal input supply analysis of line-start PMM using finite element analysis (FEA), in the present times a greater awareness is generated by the problems of harmonic voltages and currents produced by non-linear loads like the power electronic converters. These combine with non-linear nature of PMM core and produce severe distortions in voltages and currents and increase the power loss, additional copper losses due to harmonic currents, increased core losses, electromagnetic interference with communication circuits, efficiency reduction, increased in motors temperature and torque oscillations. In addition to the operation of PMM on the sinusoidal supplies, the harmonic behavior becomes important as the size and rating of the PMM increases. Thus the study of harmonics is of great practical significance in the operation of PMM.
The metal-insulator-semiconductor (MIS) capacitor is the most useful device in the study of semiconductor surfaces. Since most practical problems in the reliability and stability of all semiconductor devices are intimately related to their surface conditions, an understanding of the surface physics with the help of MIS capacitors is of great importance to device operations.
Polarization insensitive switchable metamaterial absorber/reflector for X-ban...journalBEEI
A unit cell of squared shaped polarization-insensitive switchable metamaterial absorber/reflector is presented. The structure operates at 10.20 GHz under both absorber mode and reflector mode configurations. Copper wire bridging the gaps to form a circular shape structure were used as switches for operation mode selections. The structure was designed on an FR4 substrate, and the incidental wave angles were varied from 0 to 50 degrees. The structure demonstrated almost 100% absorption at resonance, 3.314 GHz percentage bandwidth at 80% as an absorber. On the other hand, as reflector, it demonstrated almost a 90% reflection and a usable bandwidth of 3.327 GHz.
Novel Design of a Magnetically Switchable MOSFET using Magnetoresistive ElementsTELKOMNIKA JOURNAL
Various research activities have been carried out, individually, in the fields of MOSFET design andanalysis, and magnetoresistance; however, ourresearch focused on the design and analysis of a magnetically switchable MOSFET with the application of magnetoresistive elements. Theoretical study, calculations and simulations were used in order to design and analyze the magnetically switchable MOSFET. It was observed that the magnetoresistance values of 42%, 81% and 95%, respectively, for giant magnetoresistive element, tunneling magnetoresistive element and colossal magnetoresistive element resulted in reduced resistance values of 139.2Ω, 45.6Ω and 12Ω across the MOSFET in presence of magnetic field; as compared to a higher value of 240Ω in its absence. As a consequence, the gate-source voltage increased beyond the threshold value (1.5V), and the MOSFET switched ON. Accordingly, a magnetically switchable MOSFET was designed and its behavioural characteristics were analyzed.
Mechanical behavior and statistical study of aluminum wires belonging to low...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
A scalable and highly accurate RF/Microwave symmetricalinductor has been designed using microstrip line. The 18 circular and 18 square structures are optimized with 600MHz operating frequency. The characteristic interest on high frequency operating circuits is inductance value and quality factor of the spiral inductor. The value of the spiral inductor is depends on conductor width (W) space between the conductor (S), turns (n) outer diameter and inner diameter of the spiral inductor. In this design change the distribution of an inner diameter from 5mil to 10milfor 3 to 5 turns of spiral inductors. The optimization of inner diameter distribution is done by keeping space (1mil)between the conductor and width (2mil) of the conductor as constant. The changing inner diameter will effect to change in magnitude of the inductance and quality factor due passive capacitive and inductive reactance effect. These spiral inductors are designed using aluminum (Al) substrate material with 15mil height from the ground plane. The cupper material is used as a conductor of thickness 0.302mm. The aim of this paper is to compare the electromagnetic simulated results with simple equations of modified wheeler (MW), current sheet Approximation (CSA) and monomial equation (ME). The passive component effect the spiral inductor is examines the variation of inductance and quality factor. The observed electromagnetic field simulated results gives better agreement with standard simple mentioned equations with 600MHz operating frequency. The validation of spiral inductor is done with different inner diameter (5mil to 10mil) and number of turns (3turns to 5 turns) of the spiral inductor.
Planar transmission line is one of the physical medium used to transmit high frequency signal. The signal flow through the transmission line depends on the important electrical parameter, the frequency. As the signal frequency increases in a conductor, current carriers start to move towards the edges of the conductor. Flow of carriers on the conductor synchronizes with the substrate to achieve better efficiency. The signal flow in the transmission line depends on the dielectric constant of the material and the loss tangent value. The paper shows the simulation studies on return loss and insertion loss of planar transmission lines with constant frequency of 10GHz. To design planar transmission lines different dielectric materials are being selected. In our design, parameters like input impedance, conductor (silver) thickness and conductor height are kept constant. The design and analysis is done using Applied Wave Research (AWR) tool. The obtained results shows unique response and it depends on the type of dielectric medium selected.
NON-SPLIT PERFECTLY MATCHED LAYER BOUNDARY CONDITIONS FOR NUMERICAL SOLUTION ...ijeljournal
This paper developed a non - split perfectly matched layer (PML) boundary condition (BC) for Finite Difference Time Domain (FDTD) simulation of electromagnetic wave propagation in 2D structure. The
point source for electric field has been exploited for propagation of electromagnetic field through 2D structures to validate developed approach. The identity of resulted field distribution to that obtained for split PML BC have been demonstrated.
Non-split Perfectly Matched Layer Boundary Conditions for Numerical Solution ...ijeljournal
This paper developed a non - split perfectly matched layer (PML) boundary condition (BC) for Finite Difference Time Domain (FDTD) simulation of electromagnetic wave propagation in 2D structure. The point source for electric field has been exploited for propagation of electromagnetic field through 2D structures to validate developed approach. The identity of resulted field distribution to that obtained for split PML BC have been demonstrated.
Modeling Under MATLAB by ANFIS of Three-Phase Tetrahedral Transformer Using i...TELKOMNIKA JOURNAL
This work deals with the modeling of a new three-phase tetrahedral transformer of HV power
supply, which feeds three magnetrons per phase. The design of this new power supply is composed of
three single-phase with magnetic shunt transformers coupling in star; each one is size to feed voltagedoubling
cells, thereby feeds a magnetron. In order to validate the functionality of this power supply, we
simulate it under Matlab-Simulink environment. Thus, we modeled nonlinear inductance using a new
approach of neuro-fuzzy (ANFIS); this method based on the interpolation of the curve B(H) of
ferromagnetic material, the results obtained gives forms of both voltages and currents, which shows that
they are in accordance with those of experimental tests, respecting the conditions recommended by the
magnetron manufacturer
Effect of voltage on multiple particles and collisions in a single Phase Gas ...IJERA Editor
20% of failures in Gas Insulated Substations are due to the existence of various metallic contaminations in the
form of loose particles. In this paper a single Phase Gas Insulated Bus duct with inner diameter conductor
55mm and diameter of enclosure 150 mm is considered. Three particles of different sizes assumed to be rest at a
position, Power frequency voltages of 100 kV, 132 kV ,145 and 200 kV are applied to single Phase GIS bus.
The motion of the three particles is simulated for different voltages using MATLAB. Effect of the three particles
for power frequency voltage on particle movement are analyzed and time of collisions of the particle at first time
is determined for various voltages. And also the horizontal and vertical distances at which the particles collide
are determined for Particles of aluminum and copper of 10 mm in length and 0.25 mm radius, 10 mm length
and 0.15 mm radius and 7 mm and 0.25 radii. The max displacement of the particles when each particle at a time
is considered (without collision) are compared with the max radial displacements of three particles at a time by
considering the collisions. The results show that the three particle collide at different points depending on the
particles position , the velocity and direction of the particle changes after collisions.. The results show that the
max displacement of particles is higher due to collisions as compared with (without collisions) when each
particle at a time is considered.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Investigation on EM radiations from interconnects in integrated circuitsTELKOMNIKA JOURNAL
Characterization and estimation of interconnections behavior in integrated circuits design before the implementation phase is of paramount importance. This behavior seen as microstrip antennas gets complex as the internal signal (square or sine waves) frequencies increase. Thus, they become the preferred path for the propagation of electromagnetic disturbances. In this work we have worked out the numerical modeling of the electromagnetic interactions characterizing the electromagnetic compatibility in the microstrip transmission lines. The effect of these electromagnetic interactions in different structures topologies are studied through the analysis of the influence of the supply signals frequency and structures. The spacing between transmission line tracks and the number of tracks superposition is modeled. The evolution and variation of the scheme parameters in the frequency domain are determined. The transmission lines are considered parallel of equal spacing and superposed tracks of equal spacing and thickness. The capacitance and inductance matrices are computed and discussed. The results are found to comply with current research outcomes.
Design of Integrated LC Filter Using Multilayer Flexible Ferrite Sheets iosrjce
Dielectric and magnetic materials were developed for use as integrated passive component design.
The integrated LC component to be investigated in this paper uses ferrite material which combines both
magnetic and dielectric properties. Because of this double property, the ferrite sheet will be used in this design
as magnetic core for the inductor and dielectric substrate for the capacitor. The fabrication is simplified by
using PCB inductor and adhesive flexible ferrite sheet. To evaluate the inductance, the capacitance including
the parasitic resistance, a fabricated prototype of the LC component was simulated and measured. It was
confirmed that simulated values were very close to the measured values and the integrated LC component
behaves as low-pass filter
The metal-insulator-semiconductor (MIS) capacitor is the most useful device in the study of semiconductor surfaces. Since most practical problems in the reliability and stability of all semiconductor devices are intimately related to their surface conditions, an understanding of the surface physics with the help of MIS capacitors is of great importance to device operations.
Polarization insensitive switchable metamaterial absorber/reflector for X-ban...journalBEEI
A unit cell of squared shaped polarization-insensitive switchable metamaterial absorber/reflector is presented. The structure operates at 10.20 GHz under both absorber mode and reflector mode configurations. Copper wire bridging the gaps to form a circular shape structure were used as switches for operation mode selections. The structure was designed on an FR4 substrate, and the incidental wave angles were varied from 0 to 50 degrees. The structure demonstrated almost 100% absorption at resonance, 3.314 GHz percentage bandwidth at 80% as an absorber. On the other hand, as reflector, it demonstrated almost a 90% reflection and a usable bandwidth of 3.327 GHz.
Novel Design of a Magnetically Switchable MOSFET using Magnetoresistive ElementsTELKOMNIKA JOURNAL
Various research activities have been carried out, individually, in the fields of MOSFET design andanalysis, and magnetoresistance; however, ourresearch focused on the design and analysis of a magnetically switchable MOSFET with the application of magnetoresistive elements. Theoretical study, calculations and simulations were used in order to design and analyze the magnetically switchable MOSFET. It was observed that the magnetoresistance values of 42%, 81% and 95%, respectively, for giant magnetoresistive element, tunneling magnetoresistive element and colossal magnetoresistive element resulted in reduced resistance values of 139.2Ω, 45.6Ω and 12Ω across the MOSFET in presence of magnetic field; as compared to a higher value of 240Ω in its absence. As a consequence, the gate-source voltage increased beyond the threshold value (1.5V), and the MOSFET switched ON. Accordingly, a magnetically switchable MOSFET was designed and its behavioural characteristics were analyzed.
Mechanical behavior and statistical study of aluminum wires belonging to low...theijes
The International Journal of Engineering & Science is aimed at providing a platform for researchers, engineers, scientists, or educators to publish their original research results, to exchange new ideas, to disseminate information in innovative designs, engineering experiences and technological skills. It is also the Journal's objective to promote engineering and technology education. All papers submitted to the Journal will be blind peer-reviewed. Only original articles will be published.
The papers for publication in The International Journal of Engineering& Science are selected through rigorous peer reviews to ensure originality, timeliness, relevance, and readability.
A scalable and highly accurate RF/Microwave symmetricalinductor has been designed using microstrip line. The 18 circular and 18 square structures are optimized with 600MHz operating frequency. The characteristic interest on high frequency operating circuits is inductance value and quality factor of the spiral inductor. The value of the spiral inductor is depends on conductor width (W) space between the conductor (S), turns (n) outer diameter and inner diameter of the spiral inductor. In this design change the distribution of an inner diameter from 5mil to 10milfor 3 to 5 turns of spiral inductors. The optimization of inner diameter distribution is done by keeping space (1mil)between the conductor and width (2mil) of the conductor as constant. The changing inner diameter will effect to change in magnitude of the inductance and quality factor due passive capacitive and inductive reactance effect. These spiral inductors are designed using aluminum (Al) substrate material with 15mil height from the ground plane. The cupper material is used as a conductor of thickness 0.302mm. The aim of this paper is to compare the electromagnetic simulated results with simple equations of modified wheeler (MW), current sheet Approximation (CSA) and monomial equation (ME). The passive component effect the spiral inductor is examines the variation of inductance and quality factor. The observed electromagnetic field simulated results gives better agreement with standard simple mentioned equations with 600MHz operating frequency. The validation of spiral inductor is done with different inner diameter (5mil to 10mil) and number of turns (3turns to 5 turns) of the spiral inductor.
Planar transmission line is one of the physical medium used to transmit high frequency signal. The signal flow through the transmission line depends on the important electrical parameter, the frequency. As the signal frequency increases in a conductor, current carriers start to move towards the edges of the conductor. Flow of carriers on the conductor synchronizes with the substrate to achieve better efficiency. The signal flow in the transmission line depends on the dielectric constant of the material and the loss tangent value. The paper shows the simulation studies on return loss and insertion loss of planar transmission lines with constant frequency of 10GHz. To design planar transmission lines different dielectric materials are being selected. In our design, parameters like input impedance, conductor (silver) thickness and conductor height are kept constant. The design and analysis is done using Applied Wave Research (AWR) tool. The obtained results shows unique response and it depends on the type of dielectric medium selected.
NON-SPLIT PERFECTLY MATCHED LAYER BOUNDARY CONDITIONS FOR NUMERICAL SOLUTION ...ijeljournal
This paper developed a non - split perfectly matched layer (PML) boundary condition (BC) for Finite Difference Time Domain (FDTD) simulation of electromagnetic wave propagation in 2D structure. The
point source for electric field has been exploited for propagation of electromagnetic field through 2D structures to validate developed approach. The identity of resulted field distribution to that obtained for split PML BC have been demonstrated.
Non-split Perfectly Matched Layer Boundary Conditions for Numerical Solution ...ijeljournal
This paper developed a non - split perfectly matched layer (PML) boundary condition (BC) for Finite Difference Time Domain (FDTD) simulation of electromagnetic wave propagation in 2D structure. The point source for electric field has been exploited for propagation of electromagnetic field through 2D structures to validate developed approach. The identity of resulted field distribution to that obtained for split PML BC have been demonstrated.
Modeling Under MATLAB by ANFIS of Three-Phase Tetrahedral Transformer Using i...TELKOMNIKA JOURNAL
This work deals with the modeling of a new three-phase tetrahedral transformer of HV power
supply, which feeds three magnetrons per phase. The design of this new power supply is composed of
three single-phase with magnetic shunt transformers coupling in star; each one is size to feed voltagedoubling
cells, thereby feeds a magnetron. In order to validate the functionality of this power supply, we
simulate it under Matlab-Simulink environment. Thus, we modeled nonlinear inductance using a new
approach of neuro-fuzzy (ANFIS); this method based on the interpolation of the curve B(H) of
ferromagnetic material, the results obtained gives forms of both voltages and currents, which shows that
they are in accordance with those of experimental tests, respecting the conditions recommended by the
magnetron manufacturer
Effect of voltage on multiple particles and collisions in a single Phase Gas ...IJERA Editor
20% of failures in Gas Insulated Substations are due to the existence of various metallic contaminations in the
form of loose particles. In this paper a single Phase Gas Insulated Bus duct with inner diameter conductor
55mm and diameter of enclosure 150 mm is considered. Three particles of different sizes assumed to be rest at a
position, Power frequency voltages of 100 kV, 132 kV ,145 and 200 kV are applied to single Phase GIS bus.
The motion of the three particles is simulated for different voltages using MATLAB. Effect of the three particles
for power frequency voltage on particle movement are analyzed and time of collisions of the particle at first time
is determined for various voltages. And also the horizontal and vertical distances at which the particles collide
are determined for Particles of aluminum and copper of 10 mm in length and 0.25 mm radius, 10 mm length
and 0.15 mm radius and 7 mm and 0.25 radii. The max displacement of the particles when each particle at a time
is considered (without collision) are compared with the max radial displacements of three particles at a time by
considering the collisions. The results show that the three particle collide at different points depending on the
particles position , the velocity and direction of the particle changes after collisions.. The results show that the
max displacement of particles is higher due to collisions as compared with (without collisions) when each
particle at a time is considered.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Investigation on EM radiations from interconnects in integrated circuitsTELKOMNIKA JOURNAL
Characterization and estimation of interconnections behavior in integrated circuits design before the implementation phase is of paramount importance. This behavior seen as microstrip antennas gets complex as the internal signal (square or sine waves) frequencies increase. Thus, they become the preferred path for the propagation of electromagnetic disturbances. In this work we have worked out the numerical modeling of the electromagnetic interactions characterizing the electromagnetic compatibility in the microstrip transmission lines. The effect of these electromagnetic interactions in different structures topologies are studied through the analysis of the influence of the supply signals frequency and structures. The spacing between transmission line tracks and the number of tracks superposition is modeled. The evolution and variation of the scheme parameters in the frequency domain are determined. The transmission lines are considered parallel of equal spacing and superposed tracks of equal spacing and thickness. The capacitance and inductance matrices are computed and discussed. The results are found to comply with current research outcomes.
Design of Integrated LC Filter Using Multilayer Flexible Ferrite Sheets iosrjce
Dielectric and magnetic materials were developed for use as integrated passive component design.
The integrated LC component to be investigated in this paper uses ferrite material which combines both
magnetic and dielectric properties. Because of this double property, the ferrite sheet will be used in this design
as magnetic core for the inductor and dielectric substrate for the capacitor. The fabrication is simplified by
using PCB inductor and adhesive flexible ferrite sheet. To evaluate the inductance, the capacitance including
the parasitic resistance, a fabricated prototype of the LC component was simulated and measured. It was
confirmed that simulated values were very close to the measured values and the integrated LC component
behaves as low-pass filter
Comprehensive identification of sensitive and stable ISFET sensing layer high...IJECEIAES
The ISFET sensing membrane is in direct contact with the electrolyte solution, determining the starting sensitivity of these devices. A SiO2 gate dielectric shows a low response sensitivity and poor stability. This paper proposes a comprehensive identification of different high-k materials which can be used for this purpose, rather than SiO2. The Gouy-Chapman and Gouy-Chapman-Stern models were combined with the Site-binding model, based on surface potential sensitivity, to achieve the work objectives. Five materials, namely Al2O3, Ta2O5, Hfo2, Zro2 and SN2O3, which are commonly considered for micro-electronic applications, were compared. This study has identified that Ta2O5 have a high surface potential response at around 59mV/pH, and also exhibits high stability in different electrolyte concentrations. The models used have been validated with real experimental data, which achieved excellent agreement. The insights gained from this study may be of assistance to determine the suitability of different materials before progressing to expensive real ISFET fabrication.
A Hybrid Model to Predict Electron and Ion Distributions in Entire Interelect...Fa-Gung Fan
Atmospheric direct current (dc) corona discharge
from thin wires or sharp needles has been widely used as an ion
source in many devices such as photocopiers, laser printers, and
electronic air cleaners. Existing numerical models to predict the
electron distribution in the corona plasma are based on charge
continuity equations and the simplified Boltzmann equation. In
this paper, negative dc corona discharges produced from a thin
wire in dry air are modeled using a hybrid model of modified
particle-in-cell plus Monte Carlo collision (PIC-MCC) and a
continuum approach. The PIC-MCC model predicts densities of
charge carriers and electron kinetic energy distributions in the
plasma region, while the continuum model predicts the densities of
charge carriers in the unipolar ion region. Results from the hybrid
model are compared with those from prior continuum models.
Superior to the prior continuum model, the hybrid model is able
to predict the voltage–current curve of corona discharges. The
PIC-MCC simulation results also suggest the validity of the local
approximation used to solve the Boltzmann equation in the prior
continuum model.
A new hybrid method for mutual coupling minimization of an antenna array IJECEIAES
In this paper, a simultaneous application of geometric modification on patch elements and electromagnetic band gap (EBG) electromagnetic bandgap structures (hybrid method) has been suggested for 3.5 GHz wireless communication applications, to minimize the mutual coupling between radiating elements of microstrip array antennas. The suggested EBG slotted structure is composed of a one square ring and three squares placed on Rogers RO3010 having 10.2 and h=1.27 mm which presents respectively its dielectric constant and thickness. In this approach, the patch elements are geometrically modified, while also employing EBG structures, formed by four EBG cells, placed between the array elements at a near distance. The modification of the geometry of the antenna and the introduction of EBG reduces the mutual coupling of an array antenna with approximately 33 dB on the one hand and improves the antenna gain by approximately 0.43 dB on the other hand. Initially, slots are introduced in the patch geometry and then four EBG unit cells are inserted between two patches, operating at 3.5 GHz. The antenna array design parameters were optimized.
An analytical method with numerical results to be used in the design of optic...nooriasukmaningtyas
This study develops an analytical method with numerical results for the design of optical slab waveguides for optical communication system applications. An optical slab waveguide structure made of silicon on silicon dioxide material is designed and analyzed. The effective index of the mode is studied against variations in the waveguide dimensions. Transmission and reflection coefficients are studied and compared to the wavelength and dimensions of the waveguide. Variations are sketched with the x-axis, in addition to the electric field intensity distribution and effective refractive index. Waveguide bending loss is also studied with waveguide thickness and length variations within three waveguide transmission windows of 850 nm, 1300nm, and 1550nm.
IOSR Journal of Applied Physics (IOSR-JAP) is an open access international journal that provides rapid publication (within a month) of articles in all areas of physics and its applications. The journal welcomes publications of high quality papers on theoretical developments and practical applications in applied physics. Original research papers, state-of-the-art reviews, and high quality technical notes are invited for publications.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.