This document discusses the design and simulation of a multiband microstrip antenna. It begins with an abstract describing how fractal geometries have been used to improve antenna features like bandwidth. It then provides background on previous research using fractal shapes to design wideband and multiband antennas. This project aims to enhance bandwidth by combining different geometries into a hybrid fractal antenna. The antenna is analyzed using CST Microwave Studio software. Various feeding techniques and fractal geometries are tested to optimize parameters like efficiency and bandwidth. The document concludes the antenna has a wider bandwidth than regular antennas and further optimization of parameters could increase bandwidth for multiple applications.
5G Fixed Beam Switching on Microstrip Patch Antenna IJECEIAES
5G technology is using millimeter-wave band to improve the wireless communication system. However, narrow transmitter and receiver beams have caused the beam coverage area to be limited. Due to propagation limitations of mm wave band, beam forming technology with multi-beam based communication system, has been focused to overcome the problem. In this letter, a fixed beam switching method is introduced. By changing the switches, four different configurations of patch array antennas are designed to investigate their performances in terms of radiation patterns, beam forming angle, gain, half-power bandwidth and impedance bandwidth at 28 GHz operating frequency for 5G application. Mircostrip antenna is preferred due to its low profile, easy in feeding and array configurations. Three different beam directions had been formed at -15°, 0°, and 15° with half-power bandwidth of range 45˚ to 50˚.
Designing large-scale antenna array using sub-arrayjournalBEEI
Antenna array of large scale have been examined for different applications including 5G technology. To get better data rate or a reliable link substantial number of antenna arrays have been utilized to provide high multiplexing gains as well as array gains with high directivity. In this paper a simple but efficient implementation technique of using sub-arrays for the improvement of large-sized uniform arrays. By repeating a small sub-array multiple times large arrays can be designed. This implication of utilizing small array simplifies the design of a larger array which allows the designer to concentrate on the smaller sub-array before assembling larger arrays. So, by investigating the sub arrays the performance and radiation characteristics of large arrays can be anticipated. The array-factor for a planar sub-array of 2x2 (4 elements) is analyzed using Mat-lab software and then a large array is formed by placing the 2x2 sub-array indifferent configurations in a rectangular arrangements up to 8x8 planar array. And then the results are validated with CST (Computer simulation technology) simulation results.In this way the array-factors, directivities, HPBWs, and side lobes of the constructed large arrays are analyzed and associated with the small sub-array.
5G Fixed Beam Switching on Microstrip Patch Antenna IJECEIAES
5G technology is using millimeter-wave band to improve the wireless communication system. However, narrow transmitter and receiver beams have caused the beam coverage area to be limited. Due to propagation limitations of mm wave band, beam forming technology with multi-beam based communication system, has been focused to overcome the problem. In this letter, a fixed beam switching method is introduced. By changing the switches, four different configurations of patch array antennas are designed to investigate their performances in terms of radiation patterns, beam forming angle, gain, half-power bandwidth and impedance bandwidth at 28 GHz operating frequency for 5G application. Mircostrip antenna is preferred due to its low profile, easy in feeding and array configurations. Three different beam directions had been formed at -15°, 0°, and 15° with half-power bandwidth of range 45˚ to 50˚.
Designing large-scale antenna array using sub-arrayjournalBEEI
Antenna array of large scale have been examined for different applications including 5G technology. To get better data rate or a reliable link substantial number of antenna arrays have been utilized to provide high multiplexing gains as well as array gains with high directivity. In this paper a simple but efficient implementation technique of using sub-arrays for the improvement of large-sized uniform arrays. By repeating a small sub-array multiple times large arrays can be designed. This implication of utilizing small array simplifies the design of a larger array which allows the designer to concentrate on the smaller sub-array before assembling larger arrays. So, by investigating the sub arrays the performance and radiation characteristics of large arrays can be anticipated. The array-factor for a planar sub-array of 2x2 (4 elements) is analyzed using Mat-lab software and then a large array is formed by placing the 2x2 sub-array indifferent configurations in a rectangular arrangements up to 8x8 planar array. And then the results are validated with CST (Computer simulation technology) simulation results.In this way the array-factors, directivities, HPBWs, and side lobes of the constructed large arrays are analyzed and associated with the small sub-array.
A Triple Band Bow Tie Array Antenna Using Both-sided MIC Technology IJECEIAES
A single-fed linearly polarized 2x2 microstrip bow tie array antenna is proposed. The feed network has microstrip line and slot line where microstrip-slot branch circuit is connected in parallel. The feed network of the array is designed using both-sided M IC Technology to overcome the impedance matching problem of conventional feed networks. The 2x2 half bow tie array antenna is also truncated with spur lines for optimization of antenna performance. The array antenna unit can be realized in very simple and compact structure, as all the antenna elements and the feeding circuit is arranged on a Teflon glass fiber substrate without requiring any external network. The design frequency of the proposed antenna is 5 to 8 GHz (C- Band) and the obtained peak gain is 12.41 dBi. The resultant axial ratio indicates that linear polarization is achieved.
Bandwidth enhancement of rectangular microstrip patch antenna using slotsIOSR Journals
In this paper, a new design of rectangular microstrip patch antenna (RMPA) without slot, with slots
and array is proposed and analyzed. The designed antenna has been simulated using HFSS software. The
simulated results for return loss, radiation pattern and gain are presented and discussed. The bandwidth of
proposed antenna is 2.4GHz-5.9GHz for VSWR(voltage standing wave ratio)<2><-
10dB return loss as an acceptable reference in wireless applications which cover worldwide interoperability for
microwave access (WiMAX) and wireless local area network (WLAN) and other applications. Gain of 10dB is
achieved for antenna array.
Gain Enhancement of Series Feed Square Patch Microstrip Antenna Array for S b...ijsrd.com
Gain is the ability of an antenna to concentrate the radiated power in a desired direction. Only small gain can be achieved by single antenna that is why, antenna arrays are required to improve the gain by using different feed networks. This paper describes the design and performance of a series feed antenna array. The operating frequency of 2.4GHz is used. The aim of this paper is to improve the gain of a series feed antenna array. Line feed is used for designing single antenna, 2x1 & 4x1 microstrip antenna array. These series feed microstrip antenna arrays are useful for both S and C band. The proposed antenna is simulated by IE3D version 9.0 Zealand simulation software based on method of moments.
Study On The Improvement Of Bandwidth Of A Rectangular Microstrip Patch AntennaIOSR Journals
Microstrip antennas or patch antennas are popular for their attractive features such as low profile,
low weight, low cost, ease of fabrication and integration with RF devices. Micro strip antennas have been found
favorable because they are inexpensive to manufacture and compatible with monolithic microwave integrated
circuit designs (MMIC). They are usually employed at UHF and higher frequencies because the size of the
antenna is directly tied to the wavelength at the resonance frequency. A Microstrip or patch antenna is a
narrowband, wide-beam antenna fabricated by etching the antenna element pattern in metal trace bonded to an
insulating dielectric substrate with a continuous metal layer bonded to the opposite side of the substrate which
forms a ground plane. The most commonly employed microstrip antenna is a rectangular patch.
The major disadvantages of Microstrip antennas are lower gain and very narrow bandwidth. Microstrip patch
antennas have some drawbacks of low efficiency, narrow bandwidth (3-6%) of the central frequency. Millimeter
wave technology being an emerging area is still much undeveloped. As micro strip antennas have found wide
variety of application areas, a number of techniques are evolved to improve its limited bandwidth. A good
approach to improve the bandwidth is increasing the thickness of substrate supporting the micro strip patch.
However problems exist on the ability to effectively feed the patch on a thick substrate and the radiation
efficiency can degrade with increasing substrate thickness. A substantial research needs to be done in this area
as its applications are numerous. The radiation patterns and S11 performance are used for the analysis of the
different configurations. In the present endeavor a rectangular patch antenna is designed on thick substrate and simulated using MATLAB software and configuration on different dielectric susbstrates was used .
Antenna array design with rectangular ring slot for 5G technologyTELKOMNIKA JOURNAL
A patch antenna with rectangular-shaped ring slot that fed by a coaxial probe is proposed in this
article as the single element for planar patch array antenna design to meet the requirement of multiple
input multiple output (MIMO) in fifth generation (5G) technology. Initially, the single antenna element is
designed at three different center frequencies of 0.85, 1.9 and 2.6 GHz to cover the mobile operating
frequency of 0.8, 0.85, 0.9, 1.8, 2.1 and 2.6 GHz, which considering the proposed 5G spectrum below than
6 GHz. The rectangular-shaped ring slot is introduced to the patch antenna with the partial ground plane to
widen the bandwidth performance. The designed single element is then arranged to design planar arrays
of 2x2. Each of elements in the planar array is fed by a coaxial probe. The designs are utilizing a
high-performance substrate, Rogers 6010LM.
Microstrip Rectangular Monopole Antennas with Defected Ground for UWB Applica...IJECEIAES
This paper presents the design of new compact antennas for ultra wide band applications. Each antenna consists of a rectangular patch fed by 50Ω microstrip transmission line and the ground element is a defected ground structure (DGS). The aim of this study is to improve the bandwidth of these antennas by using DGS and the modification geometry of rectangular structure, which gives new compact antennas for UWB applications. The input impedance bandwidth of the antennas with S11<-10dB is more than 10GHz, from 3GHz to more than 14 GHz. The proposed antennas are investigated and optimized by using CST microwave studio, they are validated by using another electromagnetic solver Ansoft HFSS. The measured parameters present good agreement with simulation. The final antenna structures offer excellent performances for UWB system.
Microstrip patch antenna with metamaterial using superstrate technique for wi...journalBEEI
This work builds a metamaterial (MTM) superstrate loaded on a patch of microstrip antenna for wireless communications. The MTM superstrate is made up of four G-shaped resonators on FR-4 substrate with a relative permittivity of 4.4 and has a total area of (8×16) mm2, and is higher than the patch. The MTM superstrate increases antenna gain while also raising the input reflection coefficient. When it is 9 mm above the patch, the gain increased from 3.28 dB to 6.02 dB, and when it is 7 mm above the patch, the input reflection coefficient was enhanced from -31.217 dB to -45.8 dB. When the MTM superstrate loaded antenna was compared to the traditional unloaded antenna, it was discovered that metamaterials have a lot of potential for improving antenna performance.
DESIGN OF A COMPACT CIRCULAR MICROSTRIP PATCH ANTENNA FOR WLAN APPLICATIONS pijans
This paper presents the design of a compact circular microstrip patch antenna for WLAN applications which covers the band 5.15 to 5.825 GHz. The antenna is designed using 1.4mm thick FR-4 (lossy)substrate with relative permittivity 4.4 and a microstrip line feed is used. The radius of the circular patch is chosen as 7.62mm. To reduce the size and enhance the performance of the proposed antenna, a circular slot is loaded on circular patch and a square slot is etched on the ground plane of dimension 30mm×30mm. Design of the antenna is carried out using CST Microsoft Studio Sonimulation Software. The proposed antenna resonates at 5.5 GHz with a wider bandwidth of 702 MHz and it provides low return loss of -31.58 dB, good gain of 3.23 dB and directivity of 4.28 dBi and high efficiency of around 79% against the resonance frequency. The geometry of the proposed circular antenna with reduced size and its various performance parameters such as return loss, bandwidth, VSWR, gain, directivity, efficiency and radiation pattern plots are presented and discussed.
Parametric Analysis of Single Element U Slot Microstrip AntennaIJSRD
In wireless communication system antennas are the most important element for creating communication link between source and destination. Microsrtip antennas are used for mobile and other satellite communication application because of their light weight, low power handling capacity and low profile. The modern mobile communication system requires high gain, wide bandwidth and minimal size antennas that are capable of providing better performance over a wide range of frequency spectrum. This requirement leads to the design of microsrtip patch array antenna. This paper proposes the parametric analysis of single element U slot MSA. Low dielectric constant substrates are generally preferred for maximum radiation. Thus it prefers FR4 as a dielectric substrate. Desired patch antenna design is simulated by using high frequency simulation software and patch antenna is designed as per requirement. Antenna dimensions such as Length (L), Width (W), and substrate dielectric constant and parameters like Return Loss, Gain, impedance and current distribution are calculated using CAD-FEKO. The antenna has been design to be operated in the range of 8-12GHz. Hence this antenna is highly suitable for X-band applications.
Design and Analysis of Microstrip Antenna for CDMA Systems CommunicationIOSR Journals
This paper proposes a newly designed microstrip patch antennas (MSA) for wireless application
(CDMA Systems). The designed single antenna E-shaped patch antenna. Two parallel slots are in corporated
into the patch of a microstrip antenna to expand it bandwidth, and designed antenna operates in the frequency
range of 1.85 to 1.99 GHz. The antenna is designed using air as a dielectric substrate between the ground plane
and substrate patch antenna. IE3D is a full-wave electromagnetic simulator based on the method of moments
(MoM) technique. It has been widely used in the design of MICs, RFICs, patch antennas, wire antennas, and
other RF/wireless antennas. It can be used to calculate and plot the S parameters, VSWR, current distributions
as well as the radiation patterns. The results obtained for each patch were 2D and 3D view of patch, Directivity,
Gain, beam width and other such parameters, true and mapped 3D radiation pattern, and 2D polar radiation
pattern. The antenna successfully achieves the exhibit a broad impedance bandwidth of 27 % (at VSWR < 2)
with respect to the center frequency of 1.9 GHz is designed, fabricated, and finally measured on Spectrum
analyzer. The radiation pattern and directivity are also presented.. Gain maximum achievable is 3 dBi and good
return loss (S11 parameters) of -30 dB is achieved along with broadside radiation pattern.
Design of Dual Frequency Antenna For Global Positioning systemijsrd.com
In recent years low profile, light weight antennas are preferred for the applications which need mobility. In this research the polygonal-shape Microstrip Single Patch Antenna has been designed for GPS dual resonant frequencies (GPS L1 1.575 GHz & L5 1.176 GHz band). Simulated results for main parameters such as return loss, bandwidth, radiation patterns and gains are also discussed herein. The Designing, Simulation & Optimization of this antenna is done in ADS Software. Result of the simulation shows at 1.575 GHz and 1.176 GHz, the antenna has return loss at -20.862 dB and -14.162 dB respectively. .
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Comparative analyses of enhancing bandwidth of micro strip patch antennas a s...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
DESIGN OF A COMPACT CIRCULAR MICROSTRIP PATCH ANTENNA FOR WLAN APPLICATIONSpijans
This paper presents the design of a compact circular microstrip patch antenna for WLAN applications
which covers the band 5.15 to 5.825 GHz. The antenna is designed using 1.4mm thick FR-4
(lossy)substrate with relative permittivity 4.4 and a microstrip line feed is used. The radius of the
circular patch is chosen as 7.62mm. To reduce the size and enhance the performance of the proposed
antenna, a circular slot is loaded on circular patch and a square slot is etched on the ground plane of
dimension 30mm×30mm. Design of the antenna is carried out using CST Microsoft Studio Sonimulation
Software. The proposed antenna resonates at 5.5 GHz with a wider bandwidth of 702 MHz and it provides
low return loss of -31.58 dB, good gain of 3.23 dB and directivity of 4.28 dBi and high efficiency of around
79% against the resonance frequency. The geometry of the proposed circular antenna with reduced size
and its various performance parameters such as return loss, bandwidth, VSWR, gain, directivity, efficiency
and radiation pattern plots are presented and discussed.
A Triple Band Bow Tie Array Antenna Using Both-sided MIC Technology IJECEIAES
A single-fed linearly polarized 2x2 microstrip bow tie array antenna is proposed. The feed network has microstrip line and slot line where microstrip-slot branch circuit is connected in parallel. The feed network of the array is designed using both-sided M IC Technology to overcome the impedance matching problem of conventional feed networks. The 2x2 half bow tie array antenna is also truncated with spur lines for optimization of antenna performance. The array antenna unit can be realized in very simple and compact structure, as all the antenna elements and the feeding circuit is arranged on a Teflon glass fiber substrate without requiring any external network. The design frequency of the proposed antenna is 5 to 8 GHz (C- Band) and the obtained peak gain is 12.41 dBi. The resultant axial ratio indicates that linear polarization is achieved.
Bandwidth enhancement of rectangular microstrip patch antenna using slotsIOSR Journals
In this paper, a new design of rectangular microstrip patch antenna (RMPA) without slot, with slots
and array is proposed and analyzed. The designed antenna has been simulated using HFSS software. The
simulated results for return loss, radiation pattern and gain are presented and discussed. The bandwidth of
proposed antenna is 2.4GHz-5.9GHz for VSWR(voltage standing wave ratio)<2><-
10dB return loss as an acceptable reference in wireless applications which cover worldwide interoperability for
microwave access (WiMAX) and wireless local area network (WLAN) and other applications. Gain of 10dB is
achieved for antenna array.
Gain Enhancement of Series Feed Square Patch Microstrip Antenna Array for S b...ijsrd.com
Gain is the ability of an antenna to concentrate the radiated power in a desired direction. Only small gain can be achieved by single antenna that is why, antenna arrays are required to improve the gain by using different feed networks. This paper describes the design and performance of a series feed antenna array. The operating frequency of 2.4GHz is used. The aim of this paper is to improve the gain of a series feed antenna array. Line feed is used for designing single antenna, 2x1 & 4x1 microstrip antenna array. These series feed microstrip antenna arrays are useful for both S and C band. The proposed antenna is simulated by IE3D version 9.0 Zealand simulation software based on method of moments.
Study On The Improvement Of Bandwidth Of A Rectangular Microstrip Patch AntennaIOSR Journals
Microstrip antennas or patch antennas are popular for their attractive features such as low profile,
low weight, low cost, ease of fabrication and integration with RF devices. Micro strip antennas have been found
favorable because they are inexpensive to manufacture and compatible with monolithic microwave integrated
circuit designs (MMIC). They are usually employed at UHF and higher frequencies because the size of the
antenna is directly tied to the wavelength at the resonance frequency. A Microstrip or patch antenna is a
narrowband, wide-beam antenna fabricated by etching the antenna element pattern in metal trace bonded to an
insulating dielectric substrate with a continuous metal layer bonded to the opposite side of the substrate which
forms a ground plane. The most commonly employed microstrip antenna is a rectangular patch.
The major disadvantages of Microstrip antennas are lower gain and very narrow bandwidth. Microstrip patch
antennas have some drawbacks of low efficiency, narrow bandwidth (3-6%) of the central frequency. Millimeter
wave technology being an emerging area is still much undeveloped. As micro strip antennas have found wide
variety of application areas, a number of techniques are evolved to improve its limited bandwidth. A good
approach to improve the bandwidth is increasing the thickness of substrate supporting the micro strip patch.
However problems exist on the ability to effectively feed the patch on a thick substrate and the radiation
efficiency can degrade with increasing substrate thickness. A substantial research needs to be done in this area
as its applications are numerous. The radiation patterns and S11 performance are used for the analysis of the
different configurations. In the present endeavor a rectangular patch antenna is designed on thick substrate and simulated using MATLAB software and configuration on different dielectric susbstrates was used .
Antenna array design with rectangular ring slot for 5G technologyTELKOMNIKA JOURNAL
A patch antenna with rectangular-shaped ring slot that fed by a coaxial probe is proposed in this
article as the single element for planar patch array antenna design to meet the requirement of multiple
input multiple output (MIMO) in fifth generation (5G) technology. Initially, the single antenna element is
designed at three different center frequencies of 0.85, 1.9 and 2.6 GHz to cover the mobile operating
frequency of 0.8, 0.85, 0.9, 1.8, 2.1 and 2.6 GHz, which considering the proposed 5G spectrum below than
6 GHz. The rectangular-shaped ring slot is introduced to the patch antenna with the partial ground plane to
widen the bandwidth performance. The designed single element is then arranged to design planar arrays
of 2x2. Each of elements in the planar array is fed by a coaxial probe. The designs are utilizing a
high-performance substrate, Rogers 6010LM.
Microstrip Rectangular Monopole Antennas with Defected Ground for UWB Applica...IJECEIAES
This paper presents the design of new compact antennas for ultra wide band applications. Each antenna consists of a rectangular patch fed by 50Ω microstrip transmission line and the ground element is a defected ground structure (DGS). The aim of this study is to improve the bandwidth of these antennas by using DGS and the modification geometry of rectangular structure, which gives new compact antennas for UWB applications. The input impedance bandwidth of the antennas with S11<-10dB is more than 10GHz, from 3GHz to more than 14 GHz. The proposed antennas are investigated and optimized by using CST microwave studio, they are validated by using another electromagnetic solver Ansoft HFSS. The measured parameters present good agreement with simulation. The final antenna structures offer excellent performances for UWB system.
Microstrip patch antenna with metamaterial using superstrate technique for wi...journalBEEI
This work builds a metamaterial (MTM) superstrate loaded on a patch of microstrip antenna for wireless communications. The MTM superstrate is made up of four G-shaped resonators on FR-4 substrate with a relative permittivity of 4.4 and has a total area of (8×16) mm2, and is higher than the patch. The MTM superstrate increases antenna gain while also raising the input reflection coefficient. When it is 9 mm above the patch, the gain increased from 3.28 dB to 6.02 dB, and when it is 7 mm above the patch, the input reflection coefficient was enhanced from -31.217 dB to -45.8 dB. When the MTM superstrate loaded antenna was compared to the traditional unloaded antenna, it was discovered that metamaterials have a lot of potential for improving antenna performance.
DESIGN OF A COMPACT CIRCULAR MICROSTRIP PATCH ANTENNA FOR WLAN APPLICATIONS pijans
This paper presents the design of a compact circular microstrip patch antenna for WLAN applications which covers the band 5.15 to 5.825 GHz. The antenna is designed using 1.4mm thick FR-4 (lossy)substrate with relative permittivity 4.4 and a microstrip line feed is used. The radius of the circular patch is chosen as 7.62mm. To reduce the size and enhance the performance of the proposed antenna, a circular slot is loaded on circular patch and a square slot is etched on the ground plane of dimension 30mm×30mm. Design of the antenna is carried out using CST Microsoft Studio Sonimulation Software. The proposed antenna resonates at 5.5 GHz with a wider bandwidth of 702 MHz and it provides low return loss of -31.58 dB, good gain of 3.23 dB and directivity of 4.28 dBi and high efficiency of around 79% against the resonance frequency. The geometry of the proposed circular antenna with reduced size and its various performance parameters such as return loss, bandwidth, VSWR, gain, directivity, efficiency and radiation pattern plots are presented and discussed.
Parametric Analysis of Single Element U Slot Microstrip AntennaIJSRD
In wireless communication system antennas are the most important element for creating communication link between source and destination. Microsrtip antennas are used for mobile and other satellite communication application because of their light weight, low power handling capacity and low profile. The modern mobile communication system requires high gain, wide bandwidth and minimal size antennas that are capable of providing better performance over a wide range of frequency spectrum. This requirement leads to the design of microsrtip patch array antenna. This paper proposes the parametric analysis of single element U slot MSA. Low dielectric constant substrates are generally preferred for maximum radiation. Thus it prefers FR4 as a dielectric substrate. Desired patch antenna design is simulated by using high frequency simulation software and patch antenna is designed as per requirement. Antenna dimensions such as Length (L), Width (W), and substrate dielectric constant and parameters like Return Loss, Gain, impedance and current distribution are calculated using CAD-FEKO. The antenna has been design to be operated in the range of 8-12GHz. Hence this antenna is highly suitable for X-band applications.
Design and Analysis of Microstrip Antenna for CDMA Systems CommunicationIOSR Journals
This paper proposes a newly designed microstrip patch antennas (MSA) for wireless application
(CDMA Systems). The designed single antenna E-shaped patch antenna. Two parallel slots are in corporated
into the patch of a microstrip antenna to expand it bandwidth, and designed antenna operates in the frequency
range of 1.85 to 1.99 GHz. The antenna is designed using air as a dielectric substrate between the ground plane
and substrate patch antenna. IE3D is a full-wave electromagnetic simulator based on the method of moments
(MoM) technique. It has been widely used in the design of MICs, RFICs, patch antennas, wire antennas, and
other RF/wireless antennas. It can be used to calculate and plot the S parameters, VSWR, current distributions
as well as the radiation patterns. The results obtained for each patch were 2D and 3D view of patch, Directivity,
Gain, beam width and other such parameters, true and mapped 3D radiation pattern, and 2D polar radiation
pattern. The antenna successfully achieves the exhibit a broad impedance bandwidth of 27 % (at VSWR < 2)
with respect to the center frequency of 1.9 GHz is designed, fabricated, and finally measured on Spectrum
analyzer. The radiation pattern and directivity are also presented.. Gain maximum achievable is 3 dBi and good
return loss (S11 parameters) of -30 dB is achieved along with broadside radiation pattern.
Design of Dual Frequency Antenna For Global Positioning systemijsrd.com
In recent years low profile, light weight antennas are preferred for the applications which need mobility. In this research the polygonal-shape Microstrip Single Patch Antenna has been designed for GPS dual resonant frequencies (GPS L1 1.575 GHz & L5 1.176 GHz band). Simulated results for main parameters such as return loss, bandwidth, radiation patterns and gains are also discussed herein. The Designing, Simulation & Optimization of this antenna is done in ADS Software. Result of the simulation shows at 1.575 GHz and 1.176 GHz, the antenna has return loss at -20.862 dB and -14.162 dB respectively. .
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
Comparative analyses of enhancing bandwidth of micro strip patch antennas a s...eSAT Publishing House
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology
DESIGN OF A COMPACT CIRCULAR MICROSTRIP PATCH ANTENNA FOR WLAN APPLICATIONSpijans
This paper presents the design of a compact circular microstrip patch antenna for WLAN applications
which covers the band 5.15 to 5.825 GHz. The antenna is designed using 1.4mm thick FR-4
(lossy)substrate with relative permittivity 4.4 and a microstrip line feed is used. The radius of the
circular patch is chosen as 7.62mm. To reduce the size and enhance the performance of the proposed
antenna, a circular slot is loaded on circular patch and a square slot is etched on the ground plane of
dimension 30mm×30mm. Design of the antenna is carried out using CST Microsoft Studio Sonimulation
Software. The proposed antenna resonates at 5.5 GHz with a wider bandwidth of 702 MHz and it provides
low return loss of -31.58 dB, good gain of 3.23 dB and directivity of 4.28 dBi and high efficiency of around
79% against the resonance frequency. The geometry of the proposed circular antenna with reduced size
and its various performance parameters such as return loss, bandwidth, VSWR, gain, directivity, efficiency
and radiation pattern plots are presented and discussed.
DESIGN OF A COMPACT CIRCULAR MICROSTRIP PATCH ANTENNA FOR WLAN APPLICATIONSpijans
This paper presents the design of a compact circular microstrip patch antenna for WLAN applications
which covers the band 5.15 to 5.825 GHz. The antenna is designed using 1.4mm thick FR-4
(lossy)substrate with relative permittivity 4.4 and a microstrip line feed is used. The radius of the
circular patch is chosen as 7.62mm. To reduce the size and enhance the performance of the proposed
antenna, a circular slot is loaded on circular patch and a square slot is etched on the ground plane of
dimension 30mm×30mm. Design of the antenna is carried out using CST Microsoft Studio Sonimulation
Software. The proposed antenna resonates at 5.5 GHz with a wider bandwidth of 702 MHz and it provides
low return loss of -31.58 dB, good gain of 3.23 dB and directivity of 4.28 dBi and high efficiency of around
79% against the resonance frequency. The geometry of the proposed circular antenna with reduced size
and its various performance parameters such as return loss, bandwidth, VSWR, gain, directivity, efficiency
and radiation pattern plots are presented and discussed
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot
using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz
(ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local
Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX
(Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB
and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having
permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the
frequencies. The proposed antenna works on the principle of excitation of the slots at the operating
frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and
WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction
and have appreciable results at the operating frequencies.
A Review on Recent DGS Techniques on Multiband Microstrip Patch Antenna for W...ijtsrd
In this paper, showing review multiband microstrip patch antennas based on many different design techniques and operating principles along with its properties and configurations. Multiband antennas have become attractive due to their inherent feature of being a single solution to many requirements associated with different frequency bands. For the compact communication devices and systems, a multiband antenna with efficient transmission and reception performance is essential. In this review paper, various methods implemented by different researchers to achieve multiband operation in microstrip patch antenna with improved parameters for different standards of wireless communication are summarized. Kirti Mishra | Abdul Samee Khan | Ashish Pouranik "A Review on Recent DGS Techniques on Multiband Microstrip Patch Antenna for Wireless Applications" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-6 , October 2021, URL: https://www.ijtsrd.com/papers/ijtsrd47637.pdf Paper URL : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/47637/a-review-on-recent-dgs-techniques-on-multiband-microstrip-patch-antenna-for-wireless-applications/kirti-mishra
Design of high gain dual T-shaped stub antenna for satellite communicationTELKOMNIKA JOURNAL
The ultra wide band (UWB) antennas play a vital role in supporting different wireless standards and are suitable for wide variety of applications. This paper is aimed to present a novel UWB dual notch microstrip antenna with modified ground plane. The antenna is designed to operate in UWB ranging from 2 GHz to 12 GHz with multi band operation. This will help in operating the antenna for different operations independently. The proposed structure will operate in two notch bands 3.3-4 GHz (Wi-MAX), 5.05-5.9 GHz (WLAN) and the structure is suitable for long distance communications because of its increased directivity. The structure can also be used for X-Band applications for various applications of traffic control, weather forecasting and vehicle speed detection systems. It is observed that, the proposed structure is offering a gain of 5.2 dBi with improved directivity with a beam width of 42.230. This makes the antenna structure suitable for long distance satellite communications. The antenna is supporting the circular polarization at higher the frequencies and can be useful for the upcoming 5G mobile applications. Moreover, the proposed structure offers the less interference at the receiver. The structure is found to be smaller in dimensions, easily fabricated at low costs and can be integrated into any compact wireless devices. The structure is simulated using a commercially available software Ansys-HFSS and is analyzed.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
ABSTRACT
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
KEYWORDS
MSPA, Rectangular slots, Return loss, WLAN, WiMAX
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction
and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local
Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local
Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction
and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
A TRIPLE RECTANGULAR-SLOTTED MICROSTRIP PATCH ANTENNA FOR WLAN & WIMAX APPLIC...jantjournal
A triple rectangular slotted microstrip patch antenna is designed and investigated with and without slot using CST Software. By using the triple rectangular shaped slot the designed antenna operates at 2.4GHz (ranging from 2.3704 GHz (Gigahertz) to 2.4391 GHz at -10dB return loss) for WLAN (Wireless Local Area Network) and 3.6GHz (ranging from 3.5643 GHz to 3.6548 GHz at -10dB return loss) for WiMAX (Worldwide Interoperability for Microwave Access) applications having a maximum return loss -28.5dB and -25.4dB respectively. For the design of this antenna we have chosen FR-4 (lossy) as substrate having permittivity 4.3. The designed antenna has appreciable values of gain and directivity at both the frequencies. The proposed antenna works on the principle of excitation of the slots at the operating frequencies. The antenna was designed keeping in mind the two major Wireless standards i.e., WLAN and WiMAX bands of frequencies. The proposed triple-rectangular slots are unique in terms of its construction and have appreciable results at the operating frequencies.
Similar to IRJET - Design and Simulation of Multiband Microstrip Antenna (20)
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.