This document describes a centralized status alert system for monitoring industrial machines. The system uses a master unit and multiple slave units to monitor machines. Each slave unit is installed on a machine and monitors parameters like oil level, temperature, and material levels. If an issue is detected, the slave unit sends an alert to the master unit. The master unit then sends an SMS notification to the control department. The slave units communicate wirelessly with the master unit using NRF24L01 transceivers. The master unit uses GSM to send SMS alerts. This allows real-time monitoring of machines and alerts operators to issues to prevent downtime or damage.
IRJET- Speaking Microcontroller for Deaf and Dumb PeopleIRJET Journal
This document describes a microcontroller-based speaking system for deaf and dumb people. The system uses an Arduino Uno microcontroller interfaced with a 16x2 LCD display, keyboard with 4 buttons, and ISD 1820 voice module. The system stores pre-recorded messages corresponding to the 4 buttons. When a button is pressed, the associated message is displayed on the LCD and spoken using the voice module, allowing deaf and dumb users to communicate their needs without sign language. The system is designed to simplify communication and reduce misunderstandings.
Automatic irrigation system using ArduinoBalajiK109
In this project time operated electrical appliances like lamp and AC motor is locally customized device capable of switching electrical devices with respect to time and can be used for both home and commercial purposes. In this project we will be able to control the on and off of your devices between the time you want. They may be a light or motor etc., we will use the arduino Mega 2560, and the RTC 1307 to show and control the time. You can set the "ON" hour and the "OFF" hour.
IRJET- Android based Home Automation System with Power Optimization ModesIRJET Journal
This document describes an Android-based home automation system that allows users to control home appliances remotely and optimize power usage. The system uses an Arduino Mega microcontroller connected to sensors like light dependent resistors, passive infrared sensors, and a WiFi module to monitor the home environment and control appliances via relays. Users can control appliances and operate them in different "modes" like optimum, sleeping, or auto using a mobile app. By operating appliances according to different modes, the system aims to save power while making the home comfortable to live in. Hardware components like the Arduino, sensors, WiFi module, and relay board are discussed in detail.
In this paper, describes about how to control home appliances, auto door sliding motor, fan and lighting using GSM technology by using android application through android mobile phone. Performing of these tasks with a single android device makes every faster because the android makes SMS communication. This paper serve as a basic structure of the communication control system. The programming is done door operating system, hedge light bulbs and fan and light bulbs inside the home. Arduino Uno, Sensors and serial communicating devices are incorporated and synchronized with the personal computer. Mrs Khin Ei Ei Khine | Mr Nay Soe Shwe | Mr Aung Myo Naing "GSM Based Home Appliance Control System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26743.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26743/gsm-based-home-appliance-control-system/mrs-khin-ei-ei-khine
This document describes a pre-settable alarm system project implemented using an 8086 microprocessor, 8253/8254 timer, and 8255 ports. The alarm can be preset using thumbwheel switches interfaced to the 8255 ports. When the timer matches the preset value, an alarm will sound for 5 seconds. Control signals are generated using a 74LS138 decoder. The program code controls reading the thumbwheel switches, setting the timer, and generating the alarm output. Block, pin, and address diagrams are provided to explain the hardware interfacing and control.
embedded systems and robotics on avr platformNeha Sharma
This document discusses embedded systems and robotics using an AVR microcontroller platform. It begins with an overview of embedded systems and types. Real-time and non-real-time embedded systems are described. Examples of embedded system applications include cell phones, printers, and environmental monitoring. The ATmega16 microcontroller is then explained, including its pin diagram and features. Programming the microcontroller using Code Vision AVR is covered as well as I/O functions. The document concludes with sections on robotics laws, how an autonomous robot moves using motors and sensors, and a conclusion that electronics, mechanics, and software combine to create a robot.
A major project report on Energy Efficient Infrared (IR) Based Home Automatio...Prasant Kumar
The objective of proposed research work is to implement such a system that can reduce efforts, energy losses, provides a comfortable life, enhance living standards and can help the elderly, handicapped, disables as well as the normal beings to control the home appliances.Employment to Population ratio has increased drastically with increasing living standards. Home Automation plays an important role in maintaining these living standards of employed population by providing a secure & convenient environment. Home automation is similar to smart home, digital home, e-home and intelligent household. They both mean a high living condition with many smart devices. It is the residential extension of building automation which is using automation technology, computer technology and telecommunication technology to give the user a developed living condition, entertainment and security. It helps people to reduce house working and household management by its automation. The Home Automation Systems not only benefit the employed population but it also helps the disabled and elderly population.The vision of the system is to provide an efficient based system to control everyday home appliances. The system offers users an easy & effective means of controlling their various home appliances.
A microprocessor controlled automatic door opener including means for detecting the velocity and direction of travel of the door. The micro-controller evaluates detected changes in either the velocity or direction of travel to determine the cause, and either reverses door travel direction or ignores the detection. The settings of the door are stored in the memory of the microprocessor. The microcontroller will regulate the opening and closing speed and the direction of door travel depending upon a preprogrammed sequence. The door control mechanism is able to differentiate between these internal factors and external obstructions.
IRJET- Speaking Microcontroller for Deaf and Dumb PeopleIRJET Journal
This document describes a microcontroller-based speaking system for deaf and dumb people. The system uses an Arduino Uno microcontroller interfaced with a 16x2 LCD display, keyboard with 4 buttons, and ISD 1820 voice module. The system stores pre-recorded messages corresponding to the 4 buttons. When a button is pressed, the associated message is displayed on the LCD and spoken using the voice module, allowing deaf and dumb users to communicate their needs without sign language. The system is designed to simplify communication and reduce misunderstandings.
Automatic irrigation system using ArduinoBalajiK109
In this project time operated electrical appliances like lamp and AC motor is locally customized device capable of switching electrical devices with respect to time and can be used for both home and commercial purposes. In this project we will be able to control the on and off of your devices between the time you want. They may be a light or motor etc., we will use the arduino Mega 2560, and the RTC 1307 to show and control the time. You can set the "ON" hour and the "OFF" hour.
IRJET- Android based Home Automation System with Power Optimization ModesIRJET Journal
This document describes an Android-based home automation system that allows users to control home appliances remotely and optimize power usage. The system uses an Arduino Mega microcontroller connected to sensors like light dependent resistors, passive infrared sensors, and a WiFi module to monitor the home environment and control appliances via relays. Users can control appliances and operate them in different "modes" like optimum, sleeping, or auto using a mobile app. By operating appliances according to different modes, the system aims to save power while making the home comfortable to live in. Hardware components like the Arduino, sensors, WiFi module, and relay board are discussed in detail.
In this paper, describes about how to control home appliances, auto door sliding motor, fan and lighting using GSM technology by using android application through android mobile phone. Performing of these tasks with a single android device makes every faster because the android makes SMS communication. This paper serve as a basic structure of the communication control system. The programming is done door operating system, hedge light bulbs and fan and light bulbs inside the home. Arduino Uno, Sensors and serial communicating devices are incorporated and synchronized with the personal computer. Mrs Khin Ei Ei Khine | Mr Nay Soe Shwe | Mr Aung Myo Naing "GSM Based Home Appliance Control System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26743.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/26743/gsm-based-home-appliance-control-system/mrs-khin-ei-ei-khine
This document describes a pre-settable alarm system project implemented using an 8086 microprocessor, 8253/8254 timer, and 8255 ports. The alarm can be preset using thumbwheel switches interfaced to the 8255 ports. When the timer matches the preset value, an alarm will sound for 5 seconds. Control signals are generated using a 74LS138 decoder. The program code controls reading the thumbwheel switches, setting the timer, and generating the alarm output. Block, pin, and address diagrams are provided to explain the hardware interfacing and control.
embedded systems and robotics on avr platformNeha Sharma
This document discusses embedded systems and robotics using an AVR microcontroller platform. It begins with an overview of embedded systems and types. Real-time and non-real-time embedded systems are described. Examples of embedded system applications include cell phones, printers, and environmental monitoring. The ATmega16 microcontroller is then explained, including its pin diagram and features. Programming the microcontroller using Code Vision AVR is covered as well as I/O functions. The document concludes with sections on robotics laws, how an autonomous robot moves using motors and sensors, and a conclusion that electronics, mechanics, and software combine to create a robot.
A major project report on Energy Efficient Infrared (IR) Based Home Automatio...Prasant Kumar
The objective of proposed research work is to implement such a system that can reduce efforts, energy losses, provides a comfortable life, enhance living standards and can help the elderly, handicapped, disables as well as the normal beings to control the home appliances.Employment to Population ratio has increased drastically with increasing living standards. Home Automation plays an important role in maintaining these living standards of employed population by providing a secure & convenient environment. Home automation is similar to smart home, digital home, e-home and intelligent household. They both mean a high living condition with many smart devices. It is the residential extension of building automation which is using automation technology, computer technology and telecommunication technology to give the user a developed living condition, entertainment and security. It helps people to reduce house working and household management by its automation. The Home Automation Systems not only benefit the employed population but it also helps the disabled and elderly population.The vision of the system is to provide an efficient based system to control everyday home appliances. The system offers users an easy & effective means of controlling their various home appliances.
A microprocessor controlled automatic door opener including means for detecting the velocity and direction of travel of the door. The micro-controller evaluates detected changes in either the velocity or direction of travel to determine the cause, and either reverses door travel direction or ignores the detection. The settings of the door are stored in the memory of the microprocessor. The microcontroller will regulate the opening and closing speed and the direction of door travel depending upon a preprogrammed sequence. The door control mechanism is able to differentiate between these internal factors and external obstructions.
This document provides an overview of robotics and embedded systems topics, including definitions of key concepts. It discusses embedded systems, robotics, advanced robotics involving various sensors and modules. It also introduces the ATmega16 microcontroller and programming in Arduino. Finally, it covers interfacing technologies like Bluetooth, Zigbee, GPS and ultrasonic sensors with microcontrollers.
This document is a major project report submitted by two students, Mahesh Patil and Shivnaresh Likhar, towards fulfilling the requirements for a Bachelor of Engineering degree in Electronics and Communication Engineering. The report describes the development of a "Smart Door" system using embedded systems and microcontrollers. It includes recommendations from professors, a certificate of completion, acknowledgements, an abstract, and table of contents outlining the various chapters which will describe the literature review, analysis, design, implementation, testing and conclusion of the smart door system.
ELECTRONICS PROJECT REPORT OF HOME AUTOMATION CUM BUILDING SECUIRITYEldhose George
This document summarizes a home security and automation system that uses an intruder detection system and cameras for security, and controls lights, garden watering, and a water pump for automation. The security section uses IR sensors and cameras to detect intruders and monitor areas. The automation section controls lights, garden watering using a solenoid valve, and a water pump for an overhead tank. The system is controlled by a microcontroller and includes circuits for sensors, cameras, relays, and a power supply.
This document describes the design and implementation of a voice activated, programmable, multipurpose robot. The robot uses a microcontroller and various integrated circuits to enable voice control and wireless control via dual-tone multi-frequency signaling. The document provides details on the circuit design and components, software design in C and Assembly languages, and concludes the robot demonstrates satisfactory performance for applications such as guiding visitors or patients.
Project report on dtmf based door opening systemMukul Mohal
The document describes a cell phone security system that allows a user to unlock a door using their cell phone. It works by using DTMF (dual tone multi-frequency) signaling, where each button on the phone's keypad generates a unique tone. When the user calls their home security system and enters a valid password using their phone's keypad, the system verifies the password using the DTMF tones and automatically unlocks the door. The project aims to automate the manual process of unlocking a door with a physical key by allowing it to be unlocked remotely using a cell phone. It provides convenience by allowing entry without needing to get out of a car to unlock the door.
This document is a project report for an embedded systems and advanced robotics project completed to earn a B.Tech degree in Electronics and Instrumentation Engineering. It includes an acknowledgments section thanking project mentors. The contents section lists chapters on interfacing Arduino with components like LEDs, sensors, motors and using Arduino to build an autonomous line follower robot. It provides introductions to embedded systems, Arduino, the Arduino UNO microcontroller and IDE. Circuit diagrams and code are given for sensor interfacing examples.
Minor Project Report: Automatic Door Control SystemSaban Kumar K.C.
This minor project is based on the automatic door control system used in a room or hall based on IR sensor. This project is applicable at such places where the people are busy and people are in large number.
This document presents a smart door system that uses a passive infrared (PIR) sensor to automatically open and close doors based on detecting nearby movement. The system includes an ATmega328 microcontroller, PIR sensor, relay driver IC, voltage regulator, LCD display, and other components. When the PIR sensor detects a person within its range, it sends a signal to the microcontroller to open the door. The door then automatically closes after a set time delay if no further movement is detected. The smart door system aims to provide convenience for disabled individuals and reduce contact with doors in places like hospitals.
GSM based agriculture monitoring systemIRJET Journal
This document describes an agriculture monitoring system that uses sensors to measure soil moisture and temperature, and sends alerts via SMS if the measurements exceed thresholds. The system includes an Arduino board connected to sensors for soil moisture and temperature, as well as a GSM module. The sensors continuously monitor conditions and transmit readings to users' phones via the GSM module if the moisture or temperature levels go above or below set points. This low-cost system allows small farmers to remotely monitor field conditions without expensive dedicated equipment.
This document describes the design and implementation of a GSM alarm system. The system uses an Arduino board connected to a GSM shield to detect motion via a PIR sensor and send SMS alerts. It includes a keypad for input, LCD display for status, and buzzer for alarms. Programming was done in C++ using the Arduino IDE. The system aims to provide remote security monitoring via GSM connectivity even when the owner is away. Some challenges included delays receiving hardware and issues with the GSM functionality during testing. Overall the project demonstrated a working GSM alarm prototype.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Embedded systems and robotics by scmandotascmandota
This document provides an overview of embedded systems and robotics basics. It discusses embedded systems and microcontrollers, including real-time and non-real-time embedded systems. It also describes types of microcontrollers like RISC and CISC, and features of the ATmega16 microcontroller. Programming microcontrollers and various programming tools are explained. Additional topics covered include I/O functions, LCDs, LEDs, timers, SPI, UART, motors, motor drivers, sensors and more. Applications of embedded systems like cell phones, calculators, and security systems are also listed.
This document provides an overview of an Arduino-based home automation system using Bluetooth. It describes using an Arduino board, Bluetooth module, relay, LDR sensor, and other components to allow appliances to be controlled wirelessly via a smartphone. The document outlines the components, how they work, advantages and disadvantages, roles and responsibilities, and possibilities for future enhancements such as using Internet of Things technology. The conclusion states that the experimental home automation system was able to successfully control sample appliances wirelessly from a mobile device.
The document describes a mobile controlled robot project. It uses two mobile phones, with one as the transmitter and the other as the receiver attached to the robot. When buttons are pressed on the transmitter phone, DTMF tones are generated and received by the receiver phone. The tones are decoded by a microcontroller which controls motors via a motor driver to move the robot forward, backward, left, and right. A wireless camera attached to the robot transmits video to an output screen. The robot has a range as large as the mobile network coverage area and allows remote monitoring and control.
This document provides details on designing an RFID reader based attendance system using a microcontroller. It includes the objectives, components, pin layout, block diagram and description of the project. The key components are an RFID reader, microcontroller, LCD, switches and 24C02 flash memory. The microcontroller interfaces with the RFID reader and LCD to read RFID tags and display attendance records on the LCD. It also includes explanations of microcontrollers, the 8051 microcontroller architecture, and provides an example of using a microcontroller to automatically turn a light on and off every 30 seconds.
Advanced Automation System in Industrial Applications Using PIC Microcontrol...IJMER
The main aim of this paper is to design and develop an advanced automation system in the
industries. In this technique we are using the GSM modem which have the SIM card present in it, the
user can send message on the 10 digit SIM number using the cell phone from any part of the world. The
micro controller is programmed using the embedded C. when the user will send the message to a
particular device that particular device will be on or we can also off the device. Example if the motor is
in over voltage, under voltage, over current in that time the microcontroller will trip the circuit and give
the message feedback to the user. The micro controller will read the temp from the sensor and it will
display the same on the LCD when the incoming temp crosses the set limit the micro controller will turn
OFF the device and will send the message to owner using the SIM card present in the GSM modem. We
can also check the continuous status of the device.
This document describes an automatic coded card security system that uses PIR sensors. The system uses coded cards with unique IDs to identify authorized individuals, along with a secret code number. An individual must provide both the correct card and code number to gain entry. The system detects card IDs using a card reader connected to a microcontroller. It also uses PIR sensors to detect movement and trigger alarms if an unauthorized entry is detected. The system provides secure, automated access control.
This document describes the research methodology for a project that monitors power theft before the energy meter. It uses a GSM module interfaced with an Arduino board to detect power pilferage, disconnect power supply to the consumer, and send an SMS notification. The system includes a GSM module, Arduino microcontroller, current sensor, LCD shield, and relays to control appliances and disconnect power. It provides details on the hardware components, their specifications and interfacing.
Integrated Security System With Remot Controlling Of AppliancesIRJET Journal
This document describes an integrated security system with remote controlling of appliances. The system uses various sensors like a PIR motion sensor, LPG gas leakage detector, temperature sensor and fingerprint sensor connected to an Arduino board. It allows user authentication using fingerprint verification and controlling appliances remotely using Blynk app. The system can detect motion, check visitor's temperature, detect LPG leakage and send notifications to the owner. It provides a low-cost solution for home security and automation.
SMART SECURITY SYSTEM TO PREVENT THEFT USING GSM ppt..pptabdulkareem104286
This document describes a home theft detection and alert system that uses an Arduino Uno microcontroller along with gas and tilt sensors to detect theft. When theft is detected, the system will send an alert via GSM to notify users. The system is designed to be low cost compared to commercial options and provides home security through wireless monitoring and control.
This document provides an overview of robotics and embedded systems topics, including definitions of key concepts. It discusses embedded systems, robotics, advanced robotics involving various sensors and modules. It also introduces the ATmega16 microcontroller and programming in Arduino. Finally, it covers interfacing technologies like Bluetooth, Zigbee, GPS and ultrasonic sensors with microcontrollers.
This document is a major project report submitted by two students, Mahesh Patil and Shivnaresh Likhar, towards fulfilling the requirements for a Bachelor of Engineering degree in Electronics and Communication Engineering. The report describes the development of a "Smart Door" system using embedded systems and microcontrollers. It includes recommendations from professors, a certificate of completion, acknowledgements, an abstract, and table of contents outlining the various chapters which will describe the literature review, analysis, design, implementation, testing and conclusion of the smart door system.
ELECTRONICS PROJECT REPORT OF HOME AUTOMATION CUM BUILDING SECUIRITYEldhose George
This document summarizes a home security and automation system that uses an intruder detection system and cameras for security, and controls lights, garden watering, and a water pump for automation. The security section uses IR sensors and cameras to detect intruders and monitor areas. The automation section controls lights, garden watering using a solenoid valve, and a water pump for an overhead tank. The system is controlled by a microcontroller and includes circuits for sensors, cameras, relays, and a power supply.
This document describes the design and implementation of a voice activated, programmable, multipurpose robot. The robot uses a microcontroller and various integrated circuits to enable voice control and wireless control via dual-tone multi-frequency signaling. The document provides details on the circuit design and components, software design in C and Assembly languages, and concludes the robot demonstrates satisfactory performance for applications such as guiding visitors or patients.
Project report on dtmf based door opening systemMukul Mohal
The document describes a cell phone security system that allows a user to unlock a door using their cell phone. It works by using DTMF (dual tone multi-frequency) signaling, where each button on the phone's keypad generates a unique tone. When the user calls their home security system and enters a valid password using their phone's keypad, the system verifies the password using the DTMF tones and automatically unlocks the door. The project aims to automate the manual process of unlocking a door with a physical key by allowing it to be unlocked remotely using a cell phone. It provides convenience by allowing entry without needing to get out of a car to unlock the door.
This document is a project report for an embedded systems and advanced robotics project completed to earn a B.Tech degree in Electronics and Instrumentation Engineering. It includes an acknowledgments section thanking project mentors. The contents section lists chapters on interfacing Arduino with components like LEDs, sensors, motors and using Arduino to build an autonomous line follower robot. It provides introductions to embedded systems, Arduino, the Arduino UNO microcontroller and IDE. Circuit diagrams and code are given for sensor interfacing examples.
Minor Project Report: Automatic Door Control SystemSaban Kumar K.C.
This minor project is based on the automatic door control system used in a room or hall based on IR sensor. This project is applicable at such places where the people are busy and people are in large number.
This document presents a smart door system that uses a passive infrared (PIR) sensor to automatically open and close doors based on detecting nearby movement. The system includes an ATmega328 microcontroller, PIR sensor, relay driver IC, voltage regulator, LCD display, and other components. When the PIR sensor detects a person within its range, it sends a signal to the microcontroller to open the door. The door then automatically closes after a set time delay if no further movement is detected. The smart door system aims to provide convenience for disabled individuals and reduce contact with doors in places like hospitals.
GSM based agriculture monitoring systemIRJET Journal
This document describes an agriculture monitoring system that uses sensors to measure soil moisture and temperature, and sends alerts via SMS if the measurements exceed thresholds. The system includes an Arduino board connected to sensors for soil moisture and temperature, as well as a GSM module. The sensors continuously monitor conditions and transmit readings to users' phones via the GSM module if the moisture or temperature levels go above or below set points. This low-cost system allows small farmers to remotely monitor field conditions without expensive dedicated equipment.
This document describes the design and implementation of a GSM alarm system. The system uses an Arduino board connected to a GSM shield to detect motion via a PIR sensor and send SMS alerts. It includes a keypad for input, LCD display for status, and buzzer for alarms. Programming was done in C++ using the Arduino IDE. The system aims to provide remote security monitoring via GSM connectivity even when the owner is away. Some challenges included delays receiving hardware and issues with the GSM functionality during testing. Overall the project demonstrated a working GSM alarm prototype.
International Journal of Computational Engineering Research (IJCER) is dedicated to protecting personal information and will make every reasonable effort to handle collected information appropriately. All information collected, as well as related requests, will be handled as carefully and efficiently as possible in accordance with IJCER standards for integrity and objectivity.
Embedded systems and robotics by scmandotascmandota
This document provides an overview of embedded systems and robotics basics. It discusses embedded systems and microcontrollers, including real-time and non-real-time embedded systems. It also describes types of microcontrollers like RISC and CISC, and features of the ATmega16 microcontroller. Programming microcontrollers and various programming tools are explained. Additional topics covered include I/O functions, LCDs, LEDs, timers, SPI, UART, motors, motor drivers, sensors and more. Applications of embedded systems like cell phones, calculators, and security systems are also listed.
This document provides an overview of an Arduino-based home automation system using Bluetooth. It describes using an Arduino board, Bluetooth module, relay, LDR sensor, and other components to allow appliances to be controlled wirelessly via a smartphone. The document outlines the components, how they work, advantages and disadvantages, roles and responsibilities, and possibilities for future enhancements such as using Internet of Things technology. The conclusion states that the experimental home automation system was able to successfully control sample appliances wirelessly from a mobile device.
The document describes a mobile controlled robot project. It uses two mobile phones, with one as the transmitter and the other as the receiver attached to the robot. When buttons are pressed on the transmitter phone, DTMF tones are generated and received by the receiver phone. The tones are decoded by a microcontroller which controls motors via a motor driver to move the robot forward, backward, left, and right. A wireless camera attached to the robot transmits video to an output screen. The robot has a range as large as the mobile network coverage area and allows remote monitoring and control.
This document provides details on designing an RFID reader based attendance system using a microcontroller. It includes the objectives, components, pin layout, block diagram and description of the project. The key components are an RFID reader, microcontroller, LCD, switches and 24C02 flash memory. The microcontroller interfaces with the RFID reader and LCD to read RFID tags and display attendance records on the LCD. It also includes explanations of microcontrollers, the 8051 microcontroller architecture, and provides an example of using a microcontroller to automatically turn a light on and off every 30 seconds.
Advanced Automation System in Industrial Applications Using PIC Microcontrol...IJMER
The main aim of this paper is to design and develop an advanced automation system in the
industries. In this technique we are using the GSM modem which have the SIM card present in it, the
user can send message on the 10 digit SIM number using the cell phone from any part of the world. The
micro controller is programmed using the embedded C. when the user will send the message to a
particular device that particular device will be on or we can also off the device. Example if the motor is
in over voltage, under voltage, over current in that time the microcontroller will trip the circuit and give
the message feedback to the user. The micro controller will read the temp from the sensor and it will
display the same on the LCD when the incoming temp crosses the set limit the micro controller will turn
OFF the device and will send the message to owner using the SIM card present in the GSM modem. We
can also check the continuous status of the device.
This document describes an automatic coded card security system that uses PIR sensors. The system uses coded cards with unique IDs to identify authorized individuals, along with a secret code number. An individual must provide both the correct card and code number to gain entry. The system detects card IDs using a card reader connected to a microcontroller. It also uses PIR sensors to detect movement and trigger alarms if an unauthorized entry is detected. The system provides secure, automated access control.
This document describes the research methodology for a project that monitors power theft before the energy meter. It uses a GSM module interfaced with an Arduino board to detect power pilferage, disconnect power supply to the consumer, and send an SMS notification. The system includes a GSM module, Arduino microcontroller, current sensor, LCD shield, and relays to control appliances and disconnect power. It provides details on the hardware components, their specifications and interfacing.
Integrated Security System With Remot Controlling Of AppliancesIRJET Journal
This document describes an integrated security system with remote controlling of appliances. The system uses various sensors like a PIR motion sensor, LPG gas leakage detector, temperature sensor and fingerprint sensor connected to an Arduino board. It allows user authentication using fingerprint verification and controlling appliances remotely using Blynk app. The system can detect motion, check visitor's temperature, detect LPG leakage and send notifications to the owner. It provides a low-cost solution for home security and automation.
SMART SECURITY SYSTEM TO PREVENT THEFT USING GSM ppt..pptabdulkareem104286
This document describes a home theft detection and alert system that uses an Arduino Uno microcontroller along with gas and tilt sensors to detect theft. When theft is detected, the system will send an alert via GSM to notify users. The system is designed to be low cost compared to commercial options and provides home security through wireless monitoring and control.
IRJET - ATMEGA 328P based Smart Energy Meter Test Jig using PLX-DAXIRJET Journal
An Arduino-based smart energy meter test jig was developed to test energy meters. It uses an Arduino Uno microcontroller connected to a main board with 8 golden pins that act as testing points. A multiplexer is used to measure the voltage from the 8 testing points. The Arduino collects data from the testing points and sends it to a PC via serial communication. Data collection software displays the voltage readings from each testing point in an Excel sheet in real-time. This automated test jig eliminates errors from manual testing and improves testing efficiency by testing multiple meters simultaneously.
GSM Based Home Automation System using Arduinoijtsrd
Home Automation System is used to control home appliances. With the use of computers and electronics technology electrical appliances can be controlled from any part of the world. Consequently, greater amount of energy will be saved and hence the natural resources. This can be achieved by using the mobile phone. This system is designed using Arduino UNO and GSM module. The electrical appliances are controlled by sending a text message from any mobile located in any part provided it has GSM connectivity. There are many existing Home Automation Systems on the world. But every system has its pros and cons. The proposed system is easy to implement and understand. Ma May Thet Htar | Ma Hnin Yu Myaing "GSM Based Home Automation System using Arduino" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26806.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26806/gsm-based-home-automation-system-using-arduino/ma-may-thet-htar
IRJET- Power Theft Detection and Monitoring using GSM TechnologyIRJET Journal
This document describes a system for detecting power theft using GSM technology. The system uses current sensors attached to power poles to measure current flow. An Arduino board compares readings from sensors at different poles and if a discrepancy is detected, a GSM module sends an SMS alert to the power distributor. This helps the distributor identify locations of power theft and reduce losses. The system aims to help both distributors and consumers by reducing illegal activities like electricity theft and associated increases to rates.
IOT Based Soldier Position Tracking and Health Monitoring SystemIRJET Journal
This document describes an IOT-based system to track soldier positions and monitor their health in real-time. The system uses sensors like GPS, temperature, and pulse rate attached to soldiers to monitor and transmit their location and vital signs to a base station. If a soldier is injured, their changing vital signs would alert the base station, which could then locate the soldier using the GPS data and provide immediate medical assistance. The system aims to improve soldier safety and reduce rescue response times in emergencies. It transmits sensor data like temperature and pulse rate to the base station using GSM modules. A mobile app displays the data to monitor soldier health remotely.
This document discusses automating an office environment using various sensors. It describes using RFID cards to automatically identify and greet employees upon entry. Motion detectors and a flame sensor are used for energy saving, automatic control of electronics, and fire safety. The objectives are to create a secure, safe working environment with automatic door control, lighting/device control based on presence detection, and fire alerts. Required hardware includes an Arduino, RFID components, sensors, and display. Software includes the Arduino IDE. Detailed descriptions of the Arduino, servo motor, and flame sensor components are also provided.
IRJET- Intelligent Security and Monitoring System for VehicleIRJET Journal
This document describes an intelligent security and monitoring system for vehicles that uses GPS and GSM technologies. The system detects vehicle accidents using a vibration sensor and sends SMS alerts to authorities to request immediate help. It also tracks the vehicle's location using GPS. The system is implemented using microcontrollers and sensors. When an accident is detected, the vibration readings exceed a threshold and the system takes action by sending SMS messages with the vehicle's location to get help quickly.
This document describes a project to develop an IoT-based system to track lost ATM cards using multiple sensors. The system uses an ESP8266 module connected to a GPS sensor, flex sensor, moisture sensor, lasers and buzzer to detect the location and condition of a lost ATM card. The sensor data is sent to a cloud server and can be accessed through a mobile application. The hardware components include an ESP8266, GPS module, light sensors, buzzer, moisture sensors and flex sensors. The system is intended to provide more secure tracking of lost ATM cards compared to existing solutions.
This document describes an IOT-based industrial automation system that allows users to control industrial appliances and machines over the internet. An Arduino microcontroller processes user commands received via a WiFi module. The microcontroller then controls loads and a motor via relays. The system state is displayed on an LCD screen. The goal is to efficiently automate industry using an online GUI for remote control of devices. Key hardware components include a power supply, Arduino, WiFi module, relay driver, relays, and LCD display. The system provides efficient remote control of industry appliances and machines over the internet using IOT.
Here are the key components of a regulated power supply:
- Transformer - Steps down the high voltage mains power to a lower voltage.
- Rectifier - Converts the AC output of the transformer to DC using diodes.
- Filtering - A capacitor filters the DC output to smooth the voltage.
- Regulator - A voltage regulator IC like the 7805 regulates the filtered DC voltage to a constant value, in this case 5V.
- Heat sinking - The regulator needs to be mounted to an adequate heat sink to dissipate heat from regulating the voltage.
- Input and output terminals - Allow connection of input voltage and output regulated voltage.
So in summary, a regulated power supply takes
IRJET- Wireless Data Monitoring and Fault Identification by using IoT in Ther...IRJET Journal
This document describes a wireless IoT-based system for monitoring key parameters like temperature, vibration, pressure, and level in a thermal power plant. The system uses sensors to monitor these parameters, an Arduino microcontroller to process the sensor data, and an IoT module to transmit the data remotely via SMS. This allows plant operators to continuously monitor the parameters anywhere, increasing reliability while reducing maintenance and operating costs compared to manual monitoring. If any parameter exceeds a threshold, workers are alerted to potential issues via on-site displays and remote notifications, allowing faults to be identified early and equipment damage to be prevented.
IRJET- Wireless Data Monitoring and Fault Identification by using IoT in ...IRJET Journal
This document describes a wireless IoT-based system for monitoring key parameters like temperature, vibration, pressure, and level in a thermal power plant. The system uses sensors to monitor these parameters, an Arduino microcontroller to process the sensor data, and an IoT module to transmit the data remotely via SMS. This allows plant operators to continuously monitor the parameters anywhere, increasing reliability while reducing maintenance and operating costs compared to manual monitoring. If any parameter exceeds a threshold, workers are alerted to potential issues via on-site displays and remote notifications, allowing faults to be identified early.
"Automatic Intelligent Plant Irrigation System using GSM and ARDUINO BOARD."Disha Modi
Automatic irrigation is a form of irrigation system that incorporates the theory of control, power of wireless technology and feedback system with irrigation. The aim of our project is not only to minimize this manual intervention by the farmer in farm field, but also to successfully water garden plants planted in pots too. Which is why we are using micro- controller based Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is done only when there is not enough moisture in the soil and the microcontroller decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers and helps, as they don’t have to go and turn the pump on/off manually. 3)This irrigation system can be monitor by user wirelessly. User can receive notification and can provide proper commands via his cell phone whenever necessary.
For more information refer Project Report file attached here.
"Automatic Intelligent Plant Irrigation System using Arduino and GSM board"Disha Modi
Automatic irrigation is a form of irrigation system that incorporates the theory of control, power of wireless technology and feedback system with irrigation. The aim of our project is not only to minimize this manual intervention by the farmer in farm field, but also to successfully water garden plants planted in pots too. Which is why we are using micro- controller based Automated Irrigation system will serve the following purposes: 1) As there is no un-planned usage of water, a lot of water is saved from being wasted. 2) The irrigation is done only when there is not enough moisture in the soil and the microcontroller decides when should the pump be turned on/off, saves a lot time for the farmers. This also gives much needed rest to the farmers and helps, as they don’t have to go and turn the pump on/off manually. 3)This irrigation system can be monitor by user wirelessly. User can receive notification and can provide proper commands via his cell phone whenever necessary.
IRJET- DTMF based Control Robot using ArduinoIRJET Journal
This document describes a DTMF-based control robot that is controlled using a mobile phone. The robot has four main sections: the remote section which detects DTMF tones from the mobile phone; the control section containing an Arduino Uno microcontroller that reads commands from the DTMF decoder; the driver section with a motor driver and two DC motors to drive the robot; and sensors including a rain detector. The objective is to build a remotely-controlled robot for security applications using DTMF signaling for wireless communication between the mobile phone and robot over greater distances than traditional RF-based controllers.
IRJET- Rescue of Psycological Infirmity People using Wirless NetworkIRJET Journal
This document describes a system to rescue and track psychologically impaired people using wireless networks. The system uses Arduino microcontrollers with RF transmitters and receivers to create a network between a transmitter worn by an individual and a central receiver. The transmitter sends identifying information every 10 seconds, and an alarm is triggered if no signal is received, indicating the person has wandered out of range. The goal is to reduce missing persons rates for psychologically impaired individuals using a wireless network with a 400-meter range operating at 433MHz. Hardware includes Arduino boards, RF modules, an LCD display and buzzer, powered by batteries. The system is programmed using the Arduino IDE.
IRJET- Soil Irrigation System using Moisture ContentIRJET Journal
1) The document describes a smart irrigation system that uses soil moisture sensors and a microcontroller to automate watering.
2) The soil moisture sensors measure the moisture level of the soil and send the information to the microcontroller. If the soil becomes dry, the microcontroller triggers a motor to start irrigating.
3) When the soil reaches a sufficient moisture level, the motor is turned off to prevent overwatering and waste. The farmer is notified of the motor turning on or off via SMS messages from a GSM module connected to the system.
IRJET- Intelligent Home Monitoring using IoT for Physically ChallengedIRJET Journal
This document proposes an intelligent home monitoring system using Internet of Things (IoT) technology to help physically challenged and elderly people. The system uses a Raspberry Pi microcontroller connected to sensors like a PIR motion sensor, gas leakage sensor, and Bluetooth module for voice control. It allows users to remotely monitor and control home devices like lights and appliances via an app. The system is low-cost, easy to use, improves safety and independence for users.
Similar to IRJET- Centralised Status alert system for industrial machines (20)
TUNNELING IN HIMALAYAS WITH NATM METHOD: A SPECIAL REFERENCES TO SUNGAL TUNNE...IRJET Journal
1) The document discusses the Sungal Tunnel project in Jammu and Kashmir, India, which is being constructed using the New Austrian Tunneling Method (NATM).
2) NATM involves continuous monitoring during construction to adapt to changing ground conditions, and makes extensive use of shotcrete for temporary tunnel support.
3) The methodology section outlines the systematic geotechnical design process for tunnels according to Austrian guidelines, and describes the various steps of NATM tunnel construction including initial and secondary tunnel support.
STUDY THE EFFECT OF RESPONSE REDUCTION FACTOR ON RC FRAMED STRUCTUREIRJET Journal
This study examines the effect of response reduction factors (R factors) on reinforced concrete (RC) framed structures through nonlinear dynamic analysis. Three RC frame models with varying heights (4, 8, and 12 stories) were analyzed in ETABS software under different R factors ranging from 1 to 5. The results showed that displacement increased as the R factor decreased, indicating less linear behavior for lower R factors. Drift also decreased proportionally with increasing R factors from 1 to 5. Shear forces in the frames decreased with higher R factors. In general, R factors of 3 to 5 produced more satisfactory performance with less displacement and drift. The displacement variations between different building heights were consistent at different R factors. This study evaluated how R factors influence
A COMPARATIVE ANALYSIS OF RCC ELEMENT OF SLAB WITH STARK STEEL (HYSD STEEL) A...IRJET Journal
This study compares the use of Stark Steel and TMT Steel as reinforcement materials in a two-way reinforced concrete slab. Mechanical testing is conducted to determine the tensile strength, yield strength, and other properties of each material. A two-way slab design adhering to codes and standards is executed with both materials. The performance is analyzed in terms of deflection, stability under loads, and displacement. Cost analyses accounting for material, durability, maintenance, and life cycle costs are also conducted. The findings provide insights into the economic and structural implications of each material for reinforcement selection and recommendations on the most suitable material based on the analysis.
Effect of Camber and Angles of Attack on Airfoil CharacteristicsIRJET Journal
This document discusses a study analyzing the effect of camber, position of camber, and angle of attack on the aerodynamic characteristics of airfoils. Sixteen modified asymmetric NACA airfoils were analyzed using computational fluid dynamics (CFD) by varying the camber, camber position, and angle of attack. The results showed the relationship between these parameters and the lift coefficient, drag coefficient, and lift to drag ratio. This provides insight into how changes in airfoil geometry impact aerodynamic performance.
A Review on the Progress and Challenges of Aluminum-Based Metal Matrix Compos...IRJET Journal
This document reviews the progress and challenges of aluminum-based metal matrix composites (MMCs), focusing on their fabrication processes and applications. It discusses how various aluminum MMCs have been developed using reinforcements like borides, carbides, oxides, and nitrides to improve mechanical and wear properties. These composites have gained prominence for their lightweight, high-strength and corrosion resistance properties. The document also examines recent advancements in fabrication techniques for aluminum MMCs and their growing applications in industries such as aerospace and automotive. However, it notes that challenges remain around issues like improper mixing of reinforcements and reducing reinforcement agglomeration.
Dynamic Urban Transit Optimization: A Graph Neural Network Approach for Real-...IRJET Journal
This document discusses research on using graph neural networks (GNNs) for dynamic optimization of public transportation networks in real-time. GNNs represent transit networks as graphs with nodes as stops and edges as connections. The GNN model aims to optimize networks using real-time data on vehicle locations, arrival times, and passenger loads. This helps increase mobility, decrease traffic, and improve efficiency. The system continuously trains and infers to adapt to changing transit conditions, providing decision support tools. While research has focused on performance, more work is needed on security, socio-economic impacts, contextual generalization of models, continuous learning approaches, and effective real-time visualization.
Structural Analysis and Design of Multi-Storey Symmetric and Asymmetric Shape...IRJET Journal
This document summarizes a research project that aims to compare the structural performance of conventional slab and grid slab systems in multi-story buildings using ETABS software. The study will analyze both symmetric and asymmetric building models under various loading conditions. Parameters like deflections, moments, shears, and stresses will be examined to evaluate the structural effectiveness of each slab type. The results will provide insights into the comparative behavior of conventional and grid slabs to help engineers and architects select appropriate slab systems based on building layouts and design requirements.
A Review of “Seismic Response of RC Structures Having Plan and Vertical Irreg...IRJET Journal
This document summarizes and reviews a research paper on the seismic response of reinforced concrete (RC) structures with plan and vertical irregularities, with and without infill walls. It discusses how infill walls can improve or reduce the seismic performance of RC buildings, depending on factors like wall layout, height distribution, connection to the frame, and relative stiffness of walls and frames. The reviewed research paper analyzes the behavior of infill walls, effects of vertical irregularities, and seismic performance of high-rise structures under linear static and dynamic analysis. It studies response characteristics like story drift, deflection and shear. The document also provides literature on similar research investigating the effects of infill walls, soft stories, plan irregularities, and different
This document provides a review of machine learning techniques used in Advanced Driver Assistance Systems (ADAS). It begins with an abstract that summarizes key applications of machine learning in ADAS, including object detection, recognition, and decision-making. The introduction discusses the integration of machine learning in ADAS and how it is transforming vehicle safety. The literature review then examines several research papers on topics like lightweight deep learning models for object detection and lane detection models using image processing. It concludes by discussing challenges and opportunities in the field, such as improving algorithm robustness and adaptability.
Long Term Trend Analysis of Precipitation and Temperature for Asosa district,...IRJET Journal
The document analyzes temperature and precipitation trends in Asosa District, Benishangul Gumuz Region, Ethiopia from 1993 to 2022 based on data from the local meteorological station. The results show:
1) The average maximum and minimum annual temperatures have generally decreased over time, with maximum temperatures decreasing by a factor of -0.0341 and minimum by -0.0152.
2) Mann-Kendall tests found the decreasing temperature trends to be statistically significant for annual maximum temperatures but not for annual minimum temperatures.
3) Annual precipitation in Asosa District showed a statistically significant increasing trend.
The conclusions recommend development planners account for rising summer precipitation and declining temperatures in
P.E.B. Framed Structure Design and Analysis Using STAAD ProIRJET Journal
This document discusses the design and analysis of pre-engineered building (PEB) framed structures using STAAD Pro software. It provides an overview of PEBs, including that they are designed off-site with building trusses and beams produced in a factory. STAAD Pro is identified as a key tool for modeling, analyzing, and designing PEBs to ensure their performance and safety under various load scenarios. The document outlines modeling structural parts in STAAD Pro, evaluating structural reactions, assigning loads, and following international design codes and standards. In summary, STAAD Pro is used to design and analyze PEB framed structures to ensure safety and code compliance.
A Review on Innovative Fiber Integration for Enhanced Reinforcement of Concre...IRJET Journal
This document provides a review of research on innovative fiber integration methods for reinforcing concrete structures. It discusses studies that have explored using carbon fiber reinforced polymer (CFRP) composites with recycled plastic aggregates to develop more sustainable strengthening techniques. It also examines using ultra-high performance fiber reinforced concrete to improve shear strength in beams. Additional topics covered include the dynamic responses of FRP-strengthened beams under static and impact loads, and the performance of preloaded CFRP-strengthened fiber reinforced concrete beams. The review highlights the potential of fiber composites to enable more sustainable and resilient construction practices.
Survey Paper on Cloud-Based Secured Healthcare SystemIRJET Journal
This document summarizes a survey on securing patient healthcare data in cloud-based systems. It discusses using technologies like facial recognition, smart cards, and cloud computing combined with strong encryption to securely store patient data. The survey found that healthcare professionals believe digitizing patient records and storing them in a centralized cloud system would improve access during emergencies and enable more efficient care compared to paper-based systems. However, ensuring privacy and security of patient data is paramount as healthcare incorporates these digital technologies.
Review on studies and research on widening of existing concrete bridgesIRJET Journal
This document summarizes several studies that have been conducted on widening existing concrete bridges. It describes a study from China that examined load distribution factors for a bridge widened with composite steel-concrete girders. It also outlines challenges and solutions for widening a bridge in the UAE, including replacing bearings and stitching the new and existing structures. Additionally, it discusses two bridge widening projects in New Zealand that involved adding precast beams and stitching to connect structures. Finally, safety measures and challenges for strengthening a historic bridge in Switzerland under live traffic are presented.
React based fullstack edtech web applicationIRJET Journal
The document describes the architecture of an educational technology web application built using the MERN stack. It discusses the frontend developed with ReactJS, backend with NodeJS and ExpressJS, and MongoDB database. The frontend provides dynamic user interfaces, while the backend offers APIs for authentication, course management, and other functions. MongoDB enables flexible data storage. The architecture aims to provide a scalable, responsive platform for online learning.
A Comprehensive Review of Integrating IoT and Blockchain Technologies in the ...IRJET Journal
This paper proposes integrating Internet of Things (IoT) and blockchain technologies to help implement objectives of India's National Education Policy (NEP) in the education sector. The paper discusses how blockchain could be used for secure student data management, credential verification, and decentralized learning platforms. IoT devices could create smart classrooms, automate attendance tracking, and enable real-time monitoring. Blockchain would ensure integrity of exam processes and resource allocation, while smart contracts automate agreements. The paper argues this integration has potential to revolutionize education by making it more secure, transparent and efficient, in alignment with NEP goals. However, challenges like infrastructure needs, data privacy, and collaborative efforts are also discussed.
A REVIEW ON THE PERFORMANCE OF COCONUT FIBRE REINFORCED CONCRETE.IRJET Journal
This document provides a review of research on the performance of coconut fibre reinforced concrete. It summarizes several studies that tested different volume fractions and lengths of coconut fibres in concrete mixtures with varying compressive strengths. The studies found that coconut fibre improved properties like tensile strength, toughness, crack resistance, and spalling resistance compared to plain concrete. Volume fractions of 2-5% and fibre lengths of 20-50mm produced the best results. The document concludes that using a 4-5% volume fraction of coconut fibres 30-40mm in length with M30-M60 grade concrete would provide benefits based on previous research.
Optimizing Business Management Process Workflows: The Dynamic Influence of Mi...IRJET Journal
The document discusses optimizing business management processes through automation using Microsoft Power Automate and artificial intelligence. It provides an overview of Power Automate's key components and features for automating workflows across various apps and services. The document then presents several scenarios applying automation solutions to common business processes like data entry, monitoring, HR, finance, customer support, and more. It estimates the potential time and cost savings from implementing automation for each scenario. Finally, the conclusion emphasizes the transformative impact of AI and automation tools on business processes and the need for ongoing optimization.
Multistoried and Multi Bay Steel Building Frame by using Seismic DesignIRJET Journal
The document describes the seismic design of a G+5 steel building frame located in Roorkee, India according to Indian codes IS 1893-2002 and IS 800. The frame was analyzed using the equivalent static load method and response spectrum method, and its response in terms of displacements and shear forces were compared. Based on the analysis, the frame was designed as a seismic-resistant steel structure according to IS 800:2007. The software STAAD Pro was used for the analysis and design.
Cost Optimization of Construction Using Plastic Waste as a Sustainable Constr...IRJET Journal
This research paper explores using plastic waste as a sustainable and cost-effective construction material. The study focuses on manufacturing pavers and bricks using recycled plastic and partially replacing concrete with plastic alternatives. Initial results found that pavers and bricks made from recycled plastic demonstrate comparable strength and durability to traditional materials while providing environmental and cost benefits. Additionally, preliminary research indicates incorporating plastic waste as a partial concrete replacement significantly reduces construction costs without compromising structural integrity. The outcomes suggest adopting plastic waste in construction can address plastic pollution while optimizing costs, promoting more sustainable building practices.
Embedded machine learning-based road conditions and driving behavior monitoringIJECEIAES
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Harnessing WebAssembly for Real-time Stateless Streaming PipelinesChristina Lin
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
6th International Conference on Machine Learning & Applications (CMLA 2024)ClaraZara1
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
Advanced control scheme of doubly fed induction generator for wind turbine us...IJECEIAES
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Understanding Inductive Bias in Machine LearningSUTEJAS
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Electric vehicle and photovoltaic advanced roles in enhancing the financial p...IJECEIAES
Climate change's impact on the planet forced the United Nations and governments to promote green energies and electric transportation. The deployments of photovoltaic (PV) and electric vehicle (EV) systems gained stronger momentum due to their numerous advantages over fossil fuel types. The advantages go beyond sustainability to reach financial support and stability. The work in this paper introduces the hybrid system between PV and EV to support industrial and commercial plants. This paper covers the theoretical framework of the proposed hybrid system including the required equation to complete the cost analysis when PV and EV are present. In addition, the proposed design diagram which sets the priorities and requirements of the system is presented. The proposed approach allows setup to advance their power stability, especially during power outages. The presented information supports researchers and plant owners to complete the necessary analysis while promoting the deployment of clean energy. The result of a case study that represents a dairy milk farmer supports the theoretical works and highlights its advanced benefits to existing plants. The short return on investment of the proposed approach supports the paper's novelty approach for the sustainable electrical system. In addition, the proposed system allows for an isolated power setup without the need for a transmission line which enhances the safety of the electrical network
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressionsVictor Morales
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.