This document describes a wireless IoT-based system for monitoring key parameters like temperature, vibration, pressure, and level in a thermal power plant. The system uses sensors to monitor these parameters, an Arduino microcontroller to process the sensor data, and an IoT module to transmit the data remotely via SMS. This allows plant operators to continuously monitor the parameters anywhere, increasing reliability while reducing maintenance and operating costs compared to manual monitoring. If any parameter exceeds a threshold, workers are alerted to potential issues via on-site displays and remote notifications, allowing faults to be identified early.
Ijeee 33-36-surveillance system for coal mines based on wireless sensor networkKumar Goud
Abstract: The foremost critical task for coal mine is of keeping track of miners spread out across a large mining areas .It becomes even difficult when mine tunnels collapse. Many mines use a radio system to track miners, but when a collapse occurs, the base stations connected by a thin wire often are rendered useless. In this project to overcome the demerits of radio system we used wireless technology for tracking the miners. For this purpose a small RF transmitter module is equipped to each person entering a mine. Each transceiver placed in the mine look after the location of miners. The transceivers communicate with base stations through Zigbee module. In addition of tracking the location of miners we also include sensors such as temperature & humidity to intimate the base station & miners when some atmosphere changes occur. Mine operators are now able to monitor the real-time locations of each miner to better pinpoint their locations in the event of an emergency. Even after a full-day of use, mine operators can locate an individual miner within ten feet.
Key Words: Wireless sensor networks (WSN), ZIGBEE, and LPC2148.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
My solution for this involves IoT device fixed on the safety jacket which is called Smart safety jacket.The Smart Safety Jacket enables complete safety of the employees working in mining and construction industries by installing a different type of sensors like Temperature sensor, Humidity sensor, Ultrasonic sensor, Motion sensor, Gas sensor, Sound sensor, RFID, Emergency Panel, and Notification Panel. These sensors connected to the network through Wi-Fi makes more relevant and valuable ever than before. In case of emergency, immediate notification will be sent to an admin who is monitoring entire miners in the mining industry and immediate action will be taken to rescue miner from the hazard.
The whole process can be stated in two points.
1. The miner has to wear the smart safety jacket (connected with the sensors) which is connected to the control room via a network.
2. A Monitor in the control room who is continuously monitoring the miners and the mining site should check the hazard status and alert and rescue the miners in case of any critical situation.
Thus the mining environment and miners will be protected from the hazard.
Ijeee 33-36-surveillance system for coal mines based on wireless sensor networkKumar Goud
Abstract: The foremost critical task for coal mine is of keeping track of miners spread out across a large mining areas .It becomes even difficult when mine tunnels collapse. Many mines use a radio system to track miners, but when a collapse occurs, the base stations connected by a thin wire often are rendered useless. In this project to overcome the demerits of radio system we used wireless technology for tracking the miners. For this purpose a small RF transmitter module is equipped to each person entering a mine. Each transceiver placed in the mine look after the location of miners. The transceivers communicate with base stations through Zigbee module. In addition of tracking the location of miners we also include sensors such as temperature & humidity to intimate the base station & miners when some atmosphere changes occur. Mine operators are now able to monitor the real-time locations of each miner to better pinpoint their locations in the event of an emergency. Even after a full-day of use, mine operators can locate an individual miner within ten feet.
Key Words: Wireless sensor networks (WSN), ZIGBEE, and LPC2148.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
My solution for this involves IoT device fixed on the safety jacket which is called Smart safety jacket.The Smart Safety Jacket enables complete safety of the employees working in mining and construction industries by installing a different type of sensors like Temperature sensor, Humidity sensor, Ultrasonic sensor, Motion sensor, Gas sensor, Sound sensor, RFID, Emergency Panel, and Notification Panel. These sensors connected to the network through Wi-Fi makes more relevant and valuable ever than before. In case of emergency, immediate notification will be sent to an admin who is monitoring entire miners in the mining industry and immediate action will be taken to rescue miner from the hazard.
The whole process can be stated in two points.
1. The miner has to wear the smart safety jacket (connected with the sensors) which is connected to the control room via a network.
2. A Monitor in the control room who is continuously monitoring the miners and the mining site should check the hazard status and alert and rescue the miners in case of any critical situation.
Thus the mining environment and miners will be protected from the hazard.
Automatic water level monitoring and control system using IoTDanish Mehraj
This is the documentation for making Automatic water level monitoring and control system using Internet of Thimgs (IoT) which will help is to save water and removes the efforts to take care of watering u[ the tanks in homes and offices.
Today safety of miners is a major challenge. Miners health is in danger mainly because of the emission of Toxic gases, insufficiency of oxygen and mine disasters. In this project we have designed a continuous monitoring system, which monitors the environmental parameters such as oxygen level and poisonous gases (methane, carbon dioxide and carbon monoxide). It also measures the miner’s pulse rate, which is done by using the heart rate sensor. During the accidents, by using this device we get to know that how many miners are alive under the mine. This system uses Zigbee technology for wireless transmission. The parameters are detected continuously by various sensors, if any abnormal condition occurs the miner will get an alert through the buzzer present on the helmet. The values of different sensors are continuously transmitted by wireless transmitter to the remote monitoring unit which is placed outside the mine and received by the receiver module (PC).
This is to design a circuit such that one can control home or industrial appliance using the help of remote. This circuit can be used to any of your home appliances (lamp, fan, radio, etc.) to make the appliance turn on/off from a TV remote control.
Using remote to control appliances reduces human efforts without compromising on efficiency. It also saves time. Infrared (IR) light is an electromagnetic radiation with a wavelength longer than that of visible light, measured from the nominal edge of visible red light at 0.7 μm and extending conventionally to 300 μm,. These radiations with a frequency below our eyes sensitivity cannot be seen, but can only be felt by our skin temperature sensors. Infrared is interesting, because it is easily generated and doesn't suffer electromagnetic interference and so it is widely used in communication and control circuits. The adventure of using lots of infrared in TV remote controls helped engineers to work on innovative projects like controlling home appliances using TV remotes etc. Receiver in the circuit receives pulsed IR rays from the remote and decoded signal is thus received by relay driver whose output activates the corresponding home appliance. According to this, it makes sense that the logical direction about managing home appliances (HASs) in the near future is going to be by means of a remote control. But wireless technologies in domestics should be implemented carefully.
Ijeee 3-6-implementation of environment monitoring system using arm microcont...Kumar Goud
Implementation of Environment Monitoring System using ARM Microcontroller Communication
SABEEH AFAQ ISMAEL 1 Dr.CHANDRASEKHAR REDDY 2
M.Tech Embedded Systems, Dept of ECE Professor
JNTUH Collage of Engineering JNTUH College of Engineering
Iraqi Ministry of Communications drpcsreeddy@gmail.com
Afaq_s2002@yahoo.com
Abstract: In present scenario, there is no mechanism to find where irrigation is needed. In this Project, we made wireless sensor network for monitoring the crop field area by Deploying water sensors in the land to detect the places where the water level is low. From Those results we irrigate to that particular place only. From the above methodology we Can conserve water and minimize the problem of water logging in the land. We used humidity Sensor to sense the weather. By this the farmer can get idea about the climate. If There is any chance for rainfall; the farmer need not irrigate the crop field. Due to this we can Conserve water and also power since we didn’t turn on motors. Nowadays in the crops the Fertilizer level is increasing, which affects people. By using pH sensors we get the Information about the soil and analyze the acid level of the soil. By which we can apply fertilizer To the place where it needs, also we can avoid over fertilization of the crops. Temperature is a Randomly varying quantity in the environment of paddy field. Temperature reading gives Information to the farmer. By using temperature sensors we can detect the temperature, and Irrigate the water to the crop.
Keywords: WSN, GSM, PDA, Zigbee
Automatic water level monitoring and control system using IoTDanish Mehraj
This is the documentation for making Automatic water level monitoring and control system using Internet of Thimgs (IoT) which will help is to save water and removes the efforts to take care of watering u[ the tanks in homes and offices.
Today safety of miners is a major challenge. Miners health is in danger mainly because of the emission of Toxic gases, insufficiency of oxygen and mine disasters. In this project we have designed a continuous monitoring system, which monitors the environmental parameters such as oxygen level and poisonous gases (methane, carbon dioxide and carbon monoxide). It also measures the miner’s pulse rate, which is done by using the heart rate sensor. During the accidents, by using this device we get to know that how many miners are alive under the mine. This system uses Zigbee technology for wireless transmission. The parameters are detected continuously by various sensors, if any abnormal condition occurs the miner will get an alert through the buzzer present on the helmet. The values of different sensors are continuously transmitted by wireless transmitter to the remote monitoring unit which is placed outside the mine and received by the receiver module (PC).
This is to design a circuit such that one can control home or industrial appliance using the help of remote. This circuit can be used to any of your home appliances (lamp, fan, radio, etc.) to make the appliance turn on/off from a TV remote control.
Using remote to control appliances reduces human efforts without compromising on efficiency. It also saves time. Infrared (IR) light is an electromagnetic radiation with a wavelength longer than that of visible light, measured from the nominal edge of visible red light at 0.7 μm and extending conventionally to 300 μm,. These radiations with a frequency below our eyes sensitivity cannot be seen, but can only be felt by our skin temperature sensors. Infrared is interesting, because it is easily generated and doesn't suffer electromagnetic interference and so it is widely used in communication and control circuits. The adventure of using lots of infrared in TV remote controls helped engineers to work on innovative projects like controlling home appliances using TV remotes etc. Receiver in the circuit receives pulsed IR rays from the remote and decoded signal is thus received by relay driver whose output activates the corresponding home appliance. According to this, it makes sense that the logical direction about managing home appliances (HASs) in the near future is going to be by means of a remote control. But wireless technologies in domestics should be implemented carefully.
Ijeee 3-6-implementation of environment monitoring system using arm microcont...Kumar Goud
Implementation of Environment Monitoring System using ARM Microcontroller Communication
SABEEH AFAQ ISMAEL 1 Dr.CHANDRASEKHAR REDDY 2
M.Tech Embedded Systems, Dept of ECE Professor
JNTUH Collage of Engineering JNTUH College of Engineering
Iraqi Ministry of Communications drpcsreeddy@gmail.com
Afaq_s2002@yahoo.com
Abstract: In present scenario, there is no mechanism to find where irrigation is needed. In this Project, we made wireless sensor network for monitoring the crop field area by Deploying water sensors in the land to detect the places where the water level is low. From Those results we irrigate to that particular place only. From the above methodology we Can conserve water and minimize the problem of water logging in the land. We used humidity Sensor to sense the weather. By this the farmer can get idea about the climate. If There is any chance for rainfall; the farmer need not irrigate the crop field. Due to this we can Conserve water and also power since we didn’t turn on motors. Nowadays in the crops the Fertilizer level is increasing, which affects people. By using pH sensors we get the Information about the soil and analyze the acid level of the soil. By which we can apply fertilizer To the place where it needs, also we can avoid over fertilization of the crops. Temperature is a Randomly varying quantity in the environment of paddy field. Temperature reading gives Information to the farmer. By using temperature sensors we can detect the temperature, and Irrigate the water to the crop.
Keywords: WSN, GSM, PDA, Zigbee
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.