This document describes a proposed system for automatic load sharing of transformers using a microcontroller. The system would share the load of one transformer, called the main transformer, to another secondary transformer, called a slave transformer, during times of peak load or faulty conditions to prevent overloading of the main transformer. It discusses transformers, LCD displays, power supplies, and other components that could be used to build such a load sharing system and monitors conditions at consumer sites. The system aims to improve reliability, efficiency and flexibility of the power distribution system while reducing costs and risks of equipment damage from overloading.
Simulation and Comparison of DVR and DSTATCOM Used for voltage sag mitigation...paperpublications3
Abstract: Power Quality problem in a system leads to various disturbances such as voltage fluctuations, transients and waveform distortions that results in a mis-operation or a failure of end user equipment. There are different types of custom power devices like Distribution Static Compensator (D-STATCOM) and Dynamic Voltage Restorer (DVR) which can effectively use for mitigation of different type of power quality problems. This paper describes the technique of correcting the supply voltage sag distributed system and also describes performance comparison are presented between DVR and DSTATCOM to know how both the devices successfully been applied to power system for regulating system voltage effectively. DSTATCOM and DVR both of them based on VSI principle. A DVR is a series compensation device which injects a voltage in series with system and a DSTATCOM is a shunt compensation device which injects a current into the system to correct the power quality problems. This paper presents a power system operation with PI controller with abc to dq0 convertor approach. Total Harmonics Distortion (THD) is also calculated for the system with and without compensation. Results are presented to assess the performance of devices as a potential custom power solution. Improve dynamic voltage control and thus increase system load ability. This paper presents modeling and simulation of DVR & DSTATCOM in MATLAB/Simulink.
The use of distributed generation (DG) within distribution systems has increased for the last two decades due to worldwide increase in demand for electricity and governmental policy change from “conventional” energy to “green” energy. High levels of penetration of DG have many significant benefits but also come with many drawbacks such as voltage drop and power losses. This study presents the impact of DG at different locations in a distribution feeder in terms of the feeder voltage profile. A radial distribution system is simulated using PSCAD/EMTDC simulation software while changing the size and location of DG in the system. The obtained results are used for better understanding on the impact of DG on voltage profile in radial distribution feeder.
A Voltage Controlled Dstatcom for Power Quality Improvementiosrjce
Due to increasing complexity in the power system, voltage sag is becoming one of the most significant
power quality problems. Voltage sag is a short reduction voltage from nominal voltage, occurs in a short time.
If the voltage sags exceed two to three cycles, then manufacturing systems making use of sensitive electronic
equipments are likely to be affected leading to major problems. It ultimately leads to wastage of resources (both
material and human) as well as financial losses. This is possible only by ensuring that uninterrupted flow of
power is maintained at proper voltage levels. This project tends look at the solving the sag problems by using
custom power devices such as Distribution Static compensator (D-STATCOM).Proposed scheme follows a new
algorithm to generate reference voltage for a distribution static compensator (DSTATCOM) operating in
voltage-control mode. The proposed scheme ensures that unity power factor (UPF) is achieved at the load
terminal during nominal operation, which is not possible in the traditional method. Also, the compensator
injects lower currents therefore, reduces losses in the feeder and voltage-source inverter. Further, a saving in
the rating of DSTATCOM is achieved which increases its capacity to mitigate voltage sag. Nearly UPF is
maintained, while regulating voltage at the load terminal, during load change. The state-space model of
DSTATCOM is incorporated with the deadbeat predictive controller for fast load voltage regulation during
voltage disturbances. With these features, this scheme allows DSTATCOM to tackle power-quality issues by
providing power factor correction, harmonic elimination, load balancing, and voltage regulation based on the
load requirement.
SRF CONTROLLED DVR FOR COMPENSATION OF BALANCED AND UNBALANCED VOLTAGE DISTUR...IAEME Publication
The growth of power electronictechnology in the field of electric power sector has caused a greater awarenesson the power quality of distribution systems. With the re-structuring of powersystems and with shifting trend towards distributed and dispersed generation,the issue of power quality is going to take newer dimensions. The presentresearch is to identify the prominent concerns in this area and hence themeasures that can enhance the quality of power. This paper investigates theproblems of voltage sag, swell and its severe impact on nonlinear loads,sensitive loads.
LOW VOLTAGE RIDE - THROUGH CAPABILITY OF WIND FARMSEditor IJMTER
Nowadays wind turbines are generally required to offer ancillary services similar to those
provided by conventional generators. One of the most important services wind turbines must offer is
to stay connected to the grid in fault situations delivering the reactive current specified in the recent
grid codes. In this paper, FACTS solutions for fixed speed wind farms such as DVR (Dynamic
Voltage Restorer) are presented as well as classic control and crowbar solutions for variable speed
wind turbines.
Simulation and Comparison of DVR and DSTATCOM Used for voltage sag mitigation...paperpublications3
Abstract: Power Quality problem in a system leads to various disturbances such as voltage fluctuations, transients and waveform distortions that results in a mis-operation or a failure of end user equipment. There are different types of custom power devices like Distribution Static Compensator (D-STATCOM) and Dynamic Voltage Restorer (DVR) which can effectively use for mitigation of different type of power quality problems. This paper describes the technique of correcting the supply voltage sag distributed system and also describes performance comparison are presented between DVR and DSTATCOM to know how both the devices successfully been applied to power system for regulating system voltage effectively. DSTATCOM and DVR both of them based on VSI principle. A DVR is a series compensation device which injects a voltage in series with system and a DSTATCOM is a shunt compensation device which injects a current into the system to correct the power quality problems. This paper presents a power system operation with PI controller with abc to dq0 convertor approach. Total Harmonics Distortion (THD) is also calculated for the system with and without compensation. Results are presented to assess the performance of devices as a potential custom power solution. Improve dynamic voltage control and thus increase system load ability. This paper presents modeling and simulation of DVR & DSTATCOM in MATLAB/Simulink.
The use of distributed generation (DG) within distribution systems has increased for the last two decades due to worldwide increase in demand for electricity and governmental policy change from “conventional” energy to “green” energy. High levels of penetration of DG have many significant benefits but also come with many drawbacks such as voltage drop and power losses. This study presents the impact of DG at different locations in a distribution feeder in terms of the feeder voltage profile. A radial distribution system is simulated using PSCAD/EMTDC simulation software while changing the size and location of DG in the system. The obtained results are used for better understanding on the impact of DG on voltage profile in radial distribution feeder.
A Voltage Controlled Dstatcom for Power Quality Improvementiosrjce
Due to increasing complexity in the power system, voltage sag is becoming one of the most significant
power quality problems. Voltage sag is a short reduction voltage from nominal voltage, occurs in a short time.
If the voltage sags exceed two to three cycles, then manufacturing systems making use of sensitive electronic
equipments are likely to be affected leading to major problems. It ultimately leads to wastage of resources (both
material and human) as well as financial losses. This is possible only by ensuring that uninterrupted flow of
power is maintained at proper voltage levels. This project tends look at the solving the sag problems by using
custom power devices such as Distribution Static compensator (D-STATCOM).Proposed scheme follows a new
algorithm to generate reference voltage for a distribution static compensator (DSTATCOM) operating in
voltage-control mode. The proposed scheme ensures that unity power factor (UPF) is achieved at the load
terminal during nominal operation, which is not possible in the traditional method. Also, the compensator
injects lower currents therefore, reduces losses in the feeder and voltage-source inverter. Further, a saving in
the rating of DSTATCOM is achieved which increases its capacity to mitigate voltage sag. Nearly UPF is
maintained, while regulating voltage at the load terminal, during load change. The state-space model of
DSTATCOM is incorporated with the deadbeat predictive controller for fast load voltage regulation during
voltage disturbances. With these features, this scheme allows DSTATCOM to tackle power-quality issues by
providing power factor correction, harmonic elimination, load balancing, and voltage regulation based on the
load requirement.
SRF CONTROLLED DVR FOR COMPENSATION OF BALANCED AND UNBALANCED VOLTAGE DISTUR...IAEME Publication
The growth of power electronictechnology in the field of electric power sector has caused a greater awarenesson the power quality of distribution systems. With the re-structuring of powersystems and with shifting trend towards distributed and dispersed generation,the issue of power quality is going to take newer dimensions. The presentresearch is to identify the prominent concerns in this area and hence themeasures that can enhance the quality of power. This paper investigates theproblems of voltage sag, swell and its severe impact on nonlinear loads,sensitive loads.
LOW VOLTAGE RIDE - THROUGH CAPABILITY OF WIND FARMSEditor IJMTER
Nowadays wind turbines are generally required to offer ancillary services similar to those
provided by conventional generators. One of the most important services wind turbines must offer is
to stay connected to the grid in fault situations delivering the reactive current specified in the recent
grid codes. In this paper, FACTS solutions for fixed speed wind farms such as DVR (Dynamic
Voltage Restorer) are presented as well as classic control and crowbar solutions for variable speed
wind turbines.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
DSTATCOM IS USED IN DISTRIBUTION SYSTEM TO IMPROVE POWER QUALITY LIKE PF CORRECTION,VOLTAGE SAG OR SWELL,HARMONICS ELEMINATION,ETC.VARIOUS CONTROL STRATEGY COMPARISION FOR DSTATCOM.ADVANTAGES AND DISADVANTAGES OF DSTATCOM.APPLICATION OF STASTCOM IN INDIA.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Comparison of Shunt Facts Devices for the Improvement of Transient Stability ...IJSRD
This paper presents, the performance of STATCOM placed at midpoint of the two machine power system and compared with the performance of SVC. The comparison of various results found for the different type of faults (single line, double line & three phase fault) occur in long transmission line, and their removal by using shunt FACTS devices is analysed. Computer simulation results under a severe disturbance condition (three phase fault) for different fault clearing times, and different line lengths are analyzed. Both controllers are implemented using MATLAB/SIMULINK. Simulation results shows that the STATCOM with conventional PI controller installed with two machine three bus systems provides better damping oscillation characteristics in rotor angle as compared to two machine power system installed with SVC. The transient stability of two machine system installed with STATCOM has been improved considerably and post settling time of the system after facing disturbance is also improved.
Stability Enhancement of Pleiku Power System using a Distribution Static Sync...IJAEMSJORNAL
This paper presents the simulation results of using a static synchronous compensator (D-STATCOM) based on voltage source converter (VSC) to enhance voltage stability and improve the stability of the actual Pleiku Power System. The PI controller based D-STATCOM is applied to stabilize and improve voltage waveforms at load buses in the studied power system under three-phase short circuit fault. Simulation results in a time domain are presented to show effectiveness of using the D-STATCOM for stability and improvement of voltage quality when small disturbances occur, and of enhancing voltage magnitude, mitigating voltage oscillation in transient conditions under a severe disturbance in the power system.
Voltage collapse mitigation by reactive power compensation at the load sideeSAT Journals
Abstract Power system stability may be defined as the property of a power system that enables it to remain in a state of operating equilibrium under normal operating conditions and to regain an acceptable state of equilibrium after being subjected to a disturbance. A general and formal definition is given below. The IEEE/CIGRE Joint Task Force has proposed the following definition-“Power system stability is the ability of an electric power system, for a given initial operating condition, to regain a state of operating equilibrium after being subjected to a physical disturbance, with most system variables bounded, so that practically the entire system remains intact.” The challenge faced in the modern power system is the collapse of voltages at heavy loads at the load buses of a power system. The voltage collapse will in turn will effect the stability of the power system. In this paper a novel way of mitigating the voltage collapse by supplying the reactive power at load buses is discussed and encouraging simulation results are obtained. The method employed is as fallows. Simulation is done without SVC and STATCOM at load buses. On comparison of the results at the load buses it is seen that with SVC and STATCOM at the load buses voltage collapse is mitigated in spite of heavily loading the system. Keywords: Voltage Collapse, Reactive Power Management, Load Bus, Power System Stability.
International Journal of Engineering Research and Development is an international premier peer reviewed open access engineering and technology journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
We follow "Rigorous Publication" model - means that all articles appear on IJERD after full appraisal, effectiveness, legitimacy and reliability of research content. International Journal of Engineering Research and Development publishes papers online as well as provide hard copy of Journal to authors after publication of paper. It is intended to serve as a forum for researchers, practitioners and developers to exchange ideas and results for the advancement of Engineering & Technology.
Simulation of D-STATCOM to study Voltage Stability in Distribution systemijsrd.com
This paper presents the simulation of D-statcom to understand the improvement of voltage stability [1] of distribution system. The power circuits of the D-STATCOM and distribution networks are made up of simpower system blocks, while the control circuits made with the simulink blocks The STATCOM is applied to regulate transmission voltage to allow greater power flow in a voltage limited transmission network, in the same manner as a static var compensator (SVC), the STATCOM has further potential by giving an inherently faster response and greater output to a system with depressed voltage and offers improved quality of supply. The main applications of the STATCOM are; Distribution STATCOM (D-STATCOM) exhibits high speed control of reactive power to provide voltage stabilization and other type of system control. The DSTATCOM protects the utility transmission or distribution system from voltage sag and /or flicker caused by rapidly varying reactive current demand. During the transient conditions the D-STATCOM provides leading or lagging reactive power to active system stability, power factor correction and load balancing.
These slides present the introduction to FACTS devices. Later we will discuss about its modelling and control aspect applications. This comes under the topic on power electronics application in smart and microgrid systems.
International Journal of Engineering Research and Development is an international premier peer reviewed open access engineering and technology journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
We follow "Rigorous Publication" model - means that all articles appear on IJERD after full appraisal, effectiveness, legitimacy and reliability of research content. International Journal of Engineering Research and Development publishes papers online as well as provide hard copy of Journal to authors after publication of paper. It is intended to serve as a forum for researchers, practitioners and developers to exchange ideas and results for the advancement of Engineering & Technology.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
DSTATCOM IS USED IN DISTRIBUTION SYSTEM TO IMPROVE POWER QUALITY LIKE PF CORRECTION,VOLTAGE SAG OR SWELL,HARMONICS ELEMINATION,ETC.VARIOUS CONTROL STRATEGY COMPARISION FOR DSTATCOM.ADVANTAGES AND DISADVANTAGES OF DSTATCOM.APPLICATION OF STASTCOM IN INDIA.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Comparison of Shunt Facts Devices for the Improvement of Transient Stability ...IJSRD
This paper presents, the performance of STATCOM placed at midpoint of the two machine power system and compared with the performance of SVC. The comparison of various results found for the different type of faults (single line, double line & three phase fault) occur in long transmission line, and their removal by using shunt FACTS devices is analysed. Computer simulation results under a severe disturbance condition (three phase fault) for different fault clearing times, and different line lengths are analyzed. Both controllers are implemented using MATLAB/SIMULINK. Simulation results shows that the STATCOM with conventional PI controller installed with two machine three bus systems provides better damping oscillation characteristics in rotor angle as compared to two machine power system installed with SVC. The transient stability of two machine system installed with STATCOM has been improved considerably and post settling time of the system after facing disturbance is also improved.
Stability Enhancement of Pleiku Power System using a Distribution Static Sync...IJAEMSJORNAL
This paper presents the simulation results of using a static synchronous compensator (D-STATCOM) based on voltage source converter (VSC) to enhance voltage stability and improve the stability of the actual Pleiku Power System. The PI controller based D-STATCOM is applied to stabilize and improve voltage waveforms at load buses in the studied power system under three-phase short circuit fault. Simulation results in a time domain are presented to show effectiveness of using the D-STATCOM for stability and improvement of voltage quality when small disturbances occur, and of enhancing voltage magnitude, mitigating voltage oscillation in transient conditions under a severe disturbance in the power system.
Voltage collapse mitigation by reactive power compensation at the load sideeSAT Journals
Abstract Power system stability may be defined as the property of a power system that enables it to remain in a state of operating equilibrium under normal operating conditions and to regain an acceptable state of equilibrium after being subjected to a disturbance. A general and formal definition is given below. The IEEE/CIGRE Joint Task Force has proposed the following definition-“Power system stability is the ability of an electric power system, for a given initial operating condition, to regain a state of operating equilibrium after being subjected to a physical disturbance, with most system variables bounded, so that practically the entire system remains intact.” The challenge faced in the modern power system is the collapse of voltages at heavy loads at the load buses of a power system. The voltage collapse will in turn will effect the stability of the power system. In this paper a novel way of mitigating the voltage collapse by supplying the reactive power at load buses is discussed and encouraging simulation results are obtained. The method employed is as fallows. Simulation is done without SVC and STATCOM at load buses. On comparison of the results at the load buses it is seen that with SVC and STATCOM at the load buses voltage collapse is mitigated in spite of heavily loading the system. Keywords: Voltage Collapse, Reactive Power Management, Load Bus, Power System Stability.
International Journal of Engineering Research and Development is an international premier peer reviewed open access engineering and technology journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
We follow "Rigorous Publication" model - means that all articles appear on IJERD after full appraisal, effectiveness, legitimacy and reliability of research content. International Journal of Engineering Research and Development publishes papers online as well as provide hard copy of Journal to authors after publication of paper. It is intended to serve as a forum for researchers, practitioners and developers to exchange ideas and results for the advancement of Engineering & Technology.
Simulation of D-STATCOM to study Voltage Stability in Distribution systemijsrd.com
This paper presents the simulation of D-statcom to understand the improvement of voltage stability [1] of distribution system. The power circuits of the D-STATCOM and distribution networks are made up of simpower system blocks, while the control circuits made with the simulink blocks The STATCOM is applied to regulate transmission voltage to allow greater power flow in a voltage limited transmission network, in the same manner as a static var compensator (SVC), the STATCOM has further potential by giving an inherently faster response and greater output to a system with depressed voltage and offers improved quality of supply. The main applications of the STATCOM are; Distribution STATCOM (D-STATCOM) exhibits high speed control of reactive power to provide voltage stabilization and other type of system control. The DSTATCOM protects the utility transmission or distribution system from voltage sag and /or flicker caused by rapidly varying reactive current demand. During the transient conditions the D-STATCOM provides leading or lagging reactive power to active system stability, power factor correction and load balancing.
These slides present the introduction to FACTS devices. Later we will discuss about its modelling and control aspect applications. This comes under the topic on power electronics application in smart and microgrid systems.
International Journal of Engineering Research and Development is an international premier peer reviewed open access engineering and technology journal promoting the discovery, innovation, advancement and dissemination of basic and transitional knowledge in engineering, technology and related disciplines.
We follow "Rigorous Publication" model - means that all articles appear on IJERD after full appraisal, effectiveness, legitimacy and reliability of research content. International Journal of Engineering Research and Development publishes papers online as well as provide hard copy of Journal to authors after publication of paper. It is intended to serve as a forum for researchers, practitioners and developers to exchange ideas and results for the advancement of Engineering & Technology.
A Review on Optimization Techniques for Power Quality Improvement using DSTAT...ijtsrd
As demand for electricity has risen exponentially, power production and transmission are affected by scarce energy, environmental constraints and other losses. Soft computing methods to fix the sag, swell and disruption of the supply voltage in the distributed device. At present, a broad variety of highly versatile controls that leverage on newly available power electronics components are evolving for custom power applications. Control electronic equipment intended to improve the stability and efficiency of electricity flows in low voltage distribution networks. The control algorithm is used to derive the fundamental weighted value of the active and reactive power components. Using a digital signal processor, DSTATCOM is built and its output as a DSTATCOM is found to be satisfactory for different types of loads. Amit Radhakrishna Parhad | Pramod Kumar Rathore "A Review on Optimization Techniques for Power Quality Improvement using DSTATCOM (Neural Network Approach)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-4 , June 2021, URL: https://www.ijtsrd.compapers/ijtsrd42403.pdf Paper URL: https://www.ijtsrd.comengineering/electrical-engineering/42403/a-review-on-optimization-techniques-for-power-quality-improvement-using-dstatcom-neural-network-approach/amit-radhakrishna-parhad
The conventional transformer in power infrastructure should be capable of meeting the demand for the load. The conventional transformer is structured and designed to handle high power. Also, the overload capacity of conventional transformers depends on the highest temperature and short-term overload. This paper represents the construction and working of the solid-state transformer which consists of AC to DC and DC to AC conversion which has low overload capability as compared to conventional transformers. Solid-state transformer finding applications in Solar and wind power generation electric vehicle battery management systems because of high-frequency operation, which is not possible in case of conventional transformers also smart transformer, provides flexible control of electric power distribution.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
A DAPTIVE S UPPLY V OLTAGE M ANAGEMENT F OR L OW P OWER L OGIC C IRCU...VLSICS Design
With the rise in demand of portable hand held devic
es and with the rise in application of wireless sen
sor
networks and RFID reduction of total power consumpt
ion has become a necessity. To save power we
operate the logic circuitry of our devices at sub-t
hreshold. In sub-threshold the drain current is
exponentially dependent on the threshold voltage he
nce the threshold variation causes profound variati
on
of I
ON
and I
OFF
the ratio of which affect the speed of a circuit d
rastically. So to mitigate this problem we
present a adaptive power management circuit which w
ill determine the minimum required supply voltage
to meet the timing requirement. Also to reduce the
power overhead and avoid bulky coil and EMI noise
we used the switch capacitor power regulator to reg
ulate and manage power instead of linear dropout
(LDO) and Inductor base switch mode power converter
Similar to IRJET- Automatic Load Sharing of Transformer (20)
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.