5. feedback control[1]
•Download as PPT, PDF•
4 likes•1,981 views
This document discusses key concepts in chemical process control systems. It describes the basic components of control systems including sensors, transmitters, controllers, and final control elements like control valves. It also discusses different types of control including regulatory control to compensate for disturbances and servo control where the controlled variable must follow a set point. Finally, it summarizes common types of feedback controllers used in these systems like proportional, proportional-integral, and proportional-integral-derivative controllers.
Report
Share
Report
Share
![Regulatory and Servo Control ,[object Object],[object Object]](data:image/gif;base64,R0lGODlhAQABAIAAAAAAAP///yH5BAEAAAAALAAAAAABAAEAAAIBRAA7)
Recommended
Types of Controllers PID PD I PD
Types of Controllers
Process control_ mechatronics engineering.
Control system is a combination of various elements connected as a unit to direct or regulate itself or any other system in order to provide a specific output is known as a Control system.
Components of a Control System
1.Controlled process: The part of the system which requires controlling is known as a controlled process.
2. Controller: The internal or external element of the system that controls the process is known as the controller.
3. Input: For every system to provide a specific result, some excitation signal must be provided. This signal is usually given through an external source. So, the externally provided signal for the desired operation is known as input.
TYPES OF DISTURBANCE:
1.an internal disturbance is generated within the system. 2.an external disturbance is generated outside the system and is an input.
Types of Control System:
1.Open loop control systems in this control system the
output is neither measured nor fed back for comparison
with the input.
2.Closed loop control systems in this control system the
actuating error signal, which is the difference between
the input signal and the feedback signal, is fed to the
controller so as to reduce the error and bring the output
of the system to a desired value.
PID
The PID control scheme is named after its three correcting terms, whose constitutes the manipulated variable (MV). The proportional, integral, and derivative terms are summed to calculate the output of the PID controller.
contents:
Ziegler-Nichols Closed-loop method.
Instrument Symbols.
continuous-mode controllers.
Proportional controller.
Derivative controller and another.
created by :Anaseem Alhanni.
University :Al- Balqa' Applied University (BAU).
Control system basics, block diagram and signal flow graph
This document discusses control systems and provides definitions and classifications of control systems. It defines a control system as an arrangement of physical elements connected to regulate, direct or command itself. Control systems are classified as natural or man-made, manual or automatic, open-loop or closed-loop, linear or non-linear. The key difference between open-loop and closed-loop systems is that closed-loop systems have feedback which makes them more accurate, reliable and less sensitive to parameter changes compared to open-loop systems. Examples of both open-loop and closed-loop systems are provided. The document also discusses transfer functions, Laplace transforms, block diagram reduction rules, and signal flow graphs.
Introduction of process control
Introduction of process control, Process control, Example of controlled process, Feedback control system, Feed forward control system,Classification of variables in chemical process, Components of control system
Control System Design
The document provides an introduction to control system design. It discusses that a control system manages the behavior of devices through feedback loops. The summary discusses the main types of control system designs:
1. Open loop and closed loop systems, with closed loop using feedback to regulate outputs based on inputs.
2. Adaptive control systems that can adapt to uncertain or changing parameters.
3. Nonlinear control systems that can handle systems with nonlinear characteristics.
The document outlines common control system components like inputs, outputs, and processing devices. It also provides examples of control systems for applications like temperature control and vehicle cruise control.
Basicontrol
Three control loops are described: open loop control which takes action without feedback, closed loop control which measures process variables, compares to setpoints, and adjusts to correct deviations, and proportional control which adjusts the correcting element proportionally to the error. Key aspects of proportional, integral, and derivative control modes are also summarized. Proportional control responds directly to error, integral control eliminates offset through repeated proportional action, and derivative control improves response in slow processes by anticipating needed output changes.
P I D CONTOLLER
This document discusses the components and functions of a PID controller. A PID controller uses proportional, integral and derivative actions to control process variables.
The proportional action reduces rise time but not steady state error. The integral action eliminates steady state error for constant inputs but slows transient response. The derivative action increases stability, reduces overshoot, and improves transient response.
Combining all three actions allows a PID controller to control processes very well without overshoot or undershoot, reaching the setpoint directly. Each parameter (Kp, Ki, Kd) affects the response, speed of response, overshoot and steady state error differently. PID controllers are widely used in industrial control systems to control variables precisely.
P, PI AND PID CONTROLLER
THIS IS A BASIC DESCRIPTION OF P, PI AND PID CONTROLLER WHICH ARE BASICALLY TYPES OF CONTROLLERS USED IN INDUSTRIAL CONTROL APPLICATIONS
pid controller
This document provides an overview of PID controllers, including:
- The three components of a PID controller are proportional, integral, and derivative terms.
- PID controllers are widely used in industrial control systems due to their general applicability even without a mathematical model of the system.
- Ziegler-Nichols tuning rules can be used to experimentally determine initial PID parameters to provide a stable initial response for the system. Fine-tuning is then used to optimize the response.
Recommended
Types of Controllers PID PD I PD
Types of Controllers
Process control_ mechatronics engineering.
Control system is a combination of various elements connected as a unit to direct or regulate itself or any other system in order to provide a specific output is known as a Control system.
Components of a Control System
1.Controlled process: The part of the system which requires controlling is known as a controlled process.
2. Controller: The internal or external element of the system that controls the process is known as the controller.
3. Input: For every system to provide a specific result, some excitation signal must be provided. This signal is usually given through an external source. So, the externally provided signal for the desired operation is known as input.
TYPES OF DISTURBANCE:
1.an internal disturbance is generated within the system. 2.an external disturbance is generated outside the system and is an input.
Types of Control System:
1.Open loop control systems in this control system the
output is neither measured nor fed back for comparison
with the input.
2.Closed loop control systems in this control system the
actuating error signal, which is the difference between
the input signal and the feedback signal, is fed to the
controller so as to reduce the error and bring the output
of the system to a desired value.
PID
The PID control scheme is named after its three correcting terms, whose constitutes the manipulated variable (MV). The proportional, integral, and derivative terms are summed to calculate the output of the PID controller.
contents:
Ziegler-Nichols Closed-loop method.
Instrument Symbols.
continuous-mode controllers.
Proportional controller.
Derivative controller and another.
created by :Anaseem Alhanni.
University :Al- Balqa' Applied University (BAU).
Control system basics, block diagram and signal flow graph
This document discusses control systems and provides definitions and classifications of control systems. It defines a control system as an arrangement of physical elements connected to regulate, direct or command itself. Control systems are classified as natural or man-made, manual or automatic, open-loop or closed-loop, linear or non-linear. The key difference between open-loop and closed-loop systems is that closed-loop systems have feedback which makes them more accurate, reliable and less sensitive to parameter changes compared to open-loop systems. Examples of both open-loop and closed-loop systems are provided. The document also discusses transfer functions, Laplace transforms, block diagram reduction rules, and signal flow graphs.
Introduction of process control
Introduction of process control, Process control, Example of controlled process, Feedback control system, Feed forward control system,Classification of variables in chemical process, Components of control system
Control System Design
The document provides an introduction to control system design. It discusses that a control system manages the behavior of devices through feedback loops. The summary discusses the main types of control system designs:
1. Open loop and closed loop systems, with closed loop using feedback to regulate outputs based on inputs.
2. Adaptive control systems that can adapt to uncertain or changing parameters.
3. Nonlinear control systems that can handle systems with nonlinear characteristics.
The document outlines common control system components like inputs, outputs, and processing devices. It also provides examples of control systems for applications like temperature control and vehicle cruise control.
Basicontrol
Three control loops are described: open loop control which takes action without feedback, closed loop control which measures process variables, compares to setpoints, and adjusts to correct deviations, and proportional control which adjusts the correcting element proportionally to the error. Key aspects of proportional, integral, and derivative control modes are also summarized. Proportional control responds directly to error, integral control eliminates offset through repeated proportional action, and derivative control improves response in slow processes by anticipating needed output changes.
P I D CONTOLLER
This document discusses the components and functions of a PID controller. A PID controller uses proportional, integral and derivative actions to control process variables.
The proportional action reduces rise time but not steady state error. The integral action eliminates steady state error for constant inputs but slows transient response. The derivative action increases stability, reduces overshoot, and improves transient response.
Combining all three actions allows a PID controller to control processes very well without overshoot or undershoot, reaching the setpoint directly. Each parameter (Kp, Ki, Kd) affects the response, speed of response, overshoot and steady state error differently. PID controllers are widely used in industrial control systems to control variables precisely.
P, PI AND PID CONTROLLER
THIS IS A BASIC DESCRIPTION OF P, PI AND PID CONTROLLER WHICH ARE BASICALLY TYPES OF CONTROLLERS USED IN INDUSTRIAL CONTROL APPLICATIONS
pid controller
This document provides an overview of PID controllers, including:
- The three components of a PID controller are proportional, integral, and derivative terms.
- PID controllers are widely used in industrial control systems due to their general applicability even without a mathematical model of the system.
- Ziegler-Nichols tuning rules can be used to experimentally determine initial PID parameters to provide a stable initial response for the system. Fine-tuning is then used to optimize the response.
Pid controllers
The document describes PID controllers and their algorithms. A PID controller uses proportional, integral and derivative terms to compute a controller output signal based on the error between the measured process variable and set point. A proportional-only controller results in offset, while adding an integral term eliminates offset but can cause oscillations. A PID controller combines all three terms and provides the most precise control, but requires tuning three parameters.
Automated process control systems
Automation refers to the use of machines and equipment to perform tasks that were previously done by humans. It is used in manufacturing to increase productivity, quality, and reduce costs. Some key benefits of automation include improved quality, reduced labor costs, increased speed and accuracy, and improved worker safety. Potential downsides include high upfront capital costs, high maintenance costs, risk of job losses, and reliance on continuous power supply. Automation can be applied at different stages of production like material handling, production processes, and quality inspection. The pharmaceutical industry uses automation for purposes like ensuring batch quality, consistency, compliance with standards, and handling of hazardous substances.
Controller ppt
The document discusses various types of industrial controllers. It describes discrete controllers that have only two positions, multistep controllers that have more than two positions, and continuous controllers that automatically adjust their output based on the error between the process variable and set point. The document also discusses proportional, PI, PD, and PID controller algorithms as well as single loop, cascade, and feedforward control configurations. Finally, it provides examples of specific controllers like pneumatic, electronic, and programmable logic controllers.
6. performance analysis of pd, pid controllers for speed control of dc motor
Aim of this paper different Proportional-Integral- Derivative (PID) controller fine-tuning techniques are investigated for speed control of DC motor. At the start PID controller parameters for different tuning techniques are involved and then applied to the DC motor model for motion (speed) control. Simulation results are display, using these controllers, objective of this paper, the performance of a choose dc motor controlled by a proportional-integral-derivative (PID) controller is below the similar transient conditions and performances are compared.
Dynamic behaviour of process
1. The document discusses different types of input changes that can be used to analyze process dynamics and control systems, including step, ramp, rectangular pulse, sinusoidal, and impulse inputs.
2. It also examines the response of different types of systems to these inputs, such as the exponential response of a first-order system to a step input and the increasing linear response of an integrating process to a step input.
3. Key parameters for characterizing second-order system responses are also introduced, including damping ratio and the differences between overdamped, critically damped, and underdamped responses.
PID Controller
The document describes various controller modes including:
1. ON-OFF/two position controller - provides discontinuous control by switching between maximum and minimum output values.
2. Proportional (P) control - controller output is proportional to the error. Provides fast response but steady state error.
3. Integral (I) control - controller output is proportional to the integral of error over time. Eliminates steady state error but increases response time.
4. Derivative (D) control - controller output is proportional to the rate of change of error. Increases damping but can amplify noise and cause instability.
Composite modes like PI, PD, and PID combine the advantages of the individual modes to provide
Split range control system
In a split range control loop, the output of a controller is split and sent to two or more control valves to control a process. The controller output is sequenced such that one valve controls when the output is 0-50% and the other valve controls when the output is 50-100%. An example is given of controlling hotwell level using a split range strategy with a recirculation valve controlling when the level is below 50% and a deaerator valve controlling when it is above 50%. The strategy allows effective control of a process using multiple final control elements with a single controller output.
Controller Tuning Method for Non-Linear Conical Tank System
In this paper, we propose a new technique for implementing optimum controller for a conical tank. The objective of the controller is to maintain the level inside the process tank in a desired value. Hence an attempt is made in this paper as Internal Model Based PID controller design for conical tank level control. For each stable operating point, a first order process model was identified using process reaction curve method. The real time implementation is done in Simulink using MATLAB. The experimental results shows that proposed control scheme have good set point tracking and disturbance rejection capability.
Ch8 pid controller
Chapter 8 Pid controllers and modified pid controllers. From the book (Ogata Modern Control Engineering 5th).
8-1 introduction
8-2 Ziegler-Nichols rules for tuning pid controllers .
Level Control of Tank System Using PID Controller-A Review
This paper discusses the review of level control of tank system using PID controller. PID controller use for one or more tank system. PID has fast response. Paper present different methods of level control. Eliminate the steady state error. It is most common way of solving problems of practical control systems.
Process control 2 chapter
Process load,process lag,self regulation,error,control lag,dead time,cycling,discontinious control modes,two position control modes,flaoting control modes,propotional band,offset,propotional control, integral control,derivative control,pid control,pi control,pd control,tuning of pid control
Cascade control system
This document discusses cascade control systems. It defines cascade control as using two closed loop controllers where the output of the first controller is the set point of the second. The first loop is called the master controller and the second the slave controller. Cascade control provides more precise control of processes with multiple stages. It allows compensation for load changes and helps maintain desired values. The document outlines applications in steam power plants including drum level control and steam temperature control. It notes both advantages like improved dynamics but also drawbacks like increased complexity and cost.
Bioreactor control system
This document discusses bioreactor control systems. It describes different types of control systems including manual control, automatic control, two-position controllers, proportional control, integral control, and derivative control. It explains that automatic control systems use four basic components: a measuring element, controller, final control element, and the process to be controlled. The document also summarizes different combinations of control methods, such as proportional plus integral control and proportional plus integral plus derivative control.
Practical Flow Essentials
This workshop is focussed 100% on flow from process control, tuning, flow instrumentation, control valves to fiscal metering. An introduction is given to the complete flow control system and methods of tuning flow loops followed by an examination of the different flow instruments with an emphasis on typical real-world applications. Close attention is given to special installation considerations and application limitations when selecting and installing different flow instruments.
It is claimed that the majority of control valves installed have not been correctly sized and that large numbers also operate in manual mode. We thus focus on the correct method of sizing and selecting a flow control valve. The course is rounded off by an examination of fiscal metering with a simple introduction to what can be a complex but critical subject involving revenues of millions of dollars.
Mathematical theory has been kept to a minimum and the focus is on practical design, installation, commissioning, troubleshooting and maintenance issues all focussed entirely on flow issues.
WHO SHOULD ATTEND?
Automation engineers
Building service designers
Chemical and mechanical engineers
Consulting engineers
Control technicians
Control valve specialists
Data systems planners and managers
DCS personnel
MORE INFORMATION: http://www.idc-online.com/content/practical-flow-essentials-2?id=
Pi dcontroller
This document describes a simple discrete PID controller implementation that can be used for applications requiring control of a system output due to changes in reference values or states. The PID controller uses proportional, integral and derivative terms to manipulate process inputs based on error history to provide accurate and stable control. It is implemented using 534 bytes of code memory and 877 CPU cycles on AVR microcontrollers.
Override control system
This document discusses override control systems. An override control system allows one controller to override another by selecting the most critical process value. It describes a system that uses override control to protect a water pump. A level controller overrides a pressure controller to slow the pump speed if the well level drops too low, preventing the pump from running dry while still maintaining some water pressure. This provides a "soft constraint" with moderated action as well as a backup "hard constraint" shutdown for additional safety. Integral windup must be managed when controllers are overridden to prevent control issues.
control system
The document describes the basic elements of process control systems, including measurement, evaluation, and control elements. It provides examples of using a level transmitter, level controller, and control valve to regulate liquid level in a tank. It also discusses using temperature sensors and controllers to regulate process temperature. Block diagrams are presented to illustrate how these elements work together in a control loop. The purposes of open loop and closed loop control systems are also overviewed.
Control system
This document provides information about a control systems course at Muthayammal Engineering College. It includes definitions of a system, control system, and examples. It describes the basic components of a control system including the controller, command input, controlled variable, and disturbances. It also explains open loop and closed loop systems as well as feedback and feedforward control. Mathematical modeling of mechanical systems including rotational and translational systems is discussed. Two relevant YouTube videos are provided.
Pid controller by Mitesh Kumar
This document discusses PID controller tuning. It defines what a PID controller is and its components - proportional, integral and derivative terms. It describes three common methods for tuning PID parameters: Ziegler-Nichols open loop method which relates process parameters to controller parameters; closed loop Ziegler-Nichols method which introduces oscillations and varies parameters; and trial and error method starting with maximum proportional band and minimum other terms then adjusting. Performance criteria for tuning are listed as minimizing error, settling time, and overshoot.
process control
This document outlines the details of the Process Dynamics and Control course at UET Lahore Faisalabad Campus. The course code is ChE-411 and it is worth 3 credit hours of theory and 1 credit hour of practical. It will be taught by Dr. Naveed Ramzan and M. Shahzad Zafar. The course covers topics such as feedback and feedforward control, dynamics of first and second order systems, controllers, stability of chemical processes, and frequency response techniques. Main textbooks include books by George Stephanopoulos and Coughanowr and Koppel. The course also includes tutorials, handouts, and a case study developing a control scheme for a complete plant.
block diagram representation of control systems
This document provides an introduction to block diagram representation of control systems. It discusses how block diagrams provide a pictorial representation of the relationships between elements in a system using blocks and arrows. The blocks represent system elements or operations, and the arrows represent the direction of signal or information flow. Specific topics covered include summing points, takeoff points, examples of representing equations as block diagrams, and canonical forms.
Sect 4, standard times, foundation for performance improvement
Stadard times are a foundation for performance improvement in a dealer workshop. This section deals with some of the reason's for deviations and what can be done to correct them.
More Related Content
What's hot
Pid controllers
The document describes PID controllers and their algorithms. A PID controller uses proportional, integral and derivative terms to compute a controller output signal based on the error between the measured process variable and set point. A proportional-only controller results in offset, while adding an integral term eliminates offset but can cause oscillations. A PID controller combines all three terms and provides the most precise control, but requires tuning three parameters.
Automated process control systems
Automation refers to the use of machines and equipment to perform tasks that were previously done by humans. It is used in manufacturing to increase productivity, quality, and reduce costs. Some key benefits of automation include improved quality, reduced labor costs, increased speed and accuracy, and improved worker safety. Potential downsides include high upfront capital costs, high maintenance costs, risk of job losses, and reliance on continuous power supply. Automation can be applied at different stages of production like material handling, production processes, and quality inspection. The pharmaceutical industry uses automation for purposes like ensuring batch quality, consistency, compliance with standards, and handling of hazardous substances.
Controller ppt
The document discusses various types of industrial controllers. It describes discrete controllers that have only two positions, multistep controllers that have more than two positions, and continuous controllers that automatically adjust their output based on the error between the process variable and set point. The document also discusses proportional, PI, PD, and PID controller algorithms as well as single loop, cascade, and feedforward control configurations. Finally, it provides examples of specific controllers like pneumatic, electronic, and programmable logic controllers.
6. performance analysis of pd, pid controllers for speed control of dc motor
Aim of this paper different Proportional-Integral- Derivative (PID) controller fine-tuning techniques are investigated for speed control of DC motor. At the start PID controller parameters for different tuning techniques are involved and then applied to the DC motor model for motion (speed) control. Simulation results are display, using these controllers, objective of this paper, the performance of a choose dc motor controlled by a proportional-integral-derivative (PID) controller is below the similar transient conditions and performances are compared.
Dynamic behaviour of process
1. The document discusses different types of input changes that can be used to analyze process dynamics and control systems, including step, ramp, rectangular pulse, sinusoidal, and impulse inputs.
2. It also examines the response of different types of systems to these inputs, such as the exponential response of a first-order system to a step input and the increasing linear response of an integrating process to a step input.
3. Key parameters for characterizing second-order system responses are also introduced, including damping ratio and the differences between overdamped, critically damped, and underdamped responses.
PID Controller
The document describes various controller modes including:
1. ON-OFF/two position controller - provides discontinuous control by switching between maximum and minimum output values.
2. Proportional (P) control - controller output is proportional to the error. Provides fast response but steady state error.
3. Integral (I) control - controller output is proportional to the integral of error over time. Eliminates steady state error but increases response time.
4. Derivative (D) control - controller output is proportional to the rate of change of error. Increases damping but can amplify noise and cause instability.
Composite modes like PI, PD, and PID combine the advantages of the individual modes to provide
Split range control system
In a split range control loop, the output of a controller is split and sent to two or more control valves to control a process. The controller output is sequenced such that one valve controls when the output is 0-50% and the other valve controls when the output is 50-100%. An example is given of controlling hotwell level using a split range strategy with a recirculation valve controlling when the level is below 50% and a deaerator valve controlling when it is above 50%. The strategy allows effective control of a process using multiple final control elements with a single controller output.
Controller Tuning Method for Non-Linear Conical Tank System
In this paper, we propose a new technique for implementing optimum controller for a conical tank. The objective of the controller is to maintain the level inside the process tank in a desired value. Hence an attempt is made in this paper as Internal Model Based PID controller design for conical tank level control. For each stable operating point, a first order process model was identified using process reaction curve method. The real time implementation is done in Simulink using MATLAB. The experimental results shows that proposed control scheme have good set point tracking and disturbance rejection capability.
Ch8 pid controller
Chapter 8 Pid controllers and modified pid controllers. From the book (Ogata Modern Control Engineering 5th).
8-1 introduction
8-2 Ziegler-Nichols rules for tuning pid controllers .
Level Control of Tank System Using PID Controller-A Review
This paper discusses the review of level control of tank system using PID controller. PID controller use for one or more tank system. PID has fast response. Paper present different methods of level control. Eliminate the steady state error. It is most common way of solving problems of practical control systems.
Process control 2 chapter
Process load,process lag,self regulation,error,control lag,dead time,cycling,discontinious control modes,two position control modes,flaoting control modes,propotional band,offset,propotional control, integral control,derivative control,pid control,pi control,pd control,tuning of pid control
Cascade control system
This document discusses cascade control systems. It defines cascade control as using two closed loop controllers where the output of the first controller is the set point of the second. The first loop is called the master controller and the second the slave controller. Cascade control provides more precise control of processes with multiple stages. It allows compensation for load changes and helps maintain desired values. The document outlines applications in steam power plants including drum level control and steam temperature control. It notes both advantages like improved dynamics but also drawbacks like increased complexity and cost.
Bioreactor control system
This document discusses bioreactor control systems. It describes different types of control systems including manual control, automatic control, two-position controllers, proportional control, integral control, and derivative control. It explains that automatic control systems use four basic components: a measuring element, controller, final control element, and the process to be controlled. The document also summarizes different combinations of control methods, such as proportional plus integral control and proportional plus integral plus derivative control.
Practical Flow Essentials
This workshop is focussed 100% on flow from process control, tuning, flow instrumentation, control valves to fiscal metering. An introduction is given to the complete flow control system and methods of tuning flow loops followed by an examination of the different flow instruments with an emphasis on typical real-world applications. Close attention is given to special installation considerations and application limitations when selecting and installing different flow instruments.
It is claimed that the majority of control valves installed have not been correctly sized and that large numbers also operate in manual mode. We thus focus on the correct method of sizing and selecting a flow control valve. The course is rounded off by an examination of fiscal metering with a simple introduction to what can be a complex but critical subject involving revenues of millions of dollars.
Mathematical theory has been kept to a minimum and the focus is on practical design, installation, commissioning, troubleshooting and maintenance issues all focussed entirely on flow issues.
WHO SHOULD ATTEND?
Automation engineers
Building service designers
Chemical and mechanical engineers
Consulting engineers
Control technicians
Control valve specialists
Data systems planners and managers
DCS personnel
MORE INFORMATION: http://www.idc-online.com/content/practical-flow-essentials-2?id=
Pi dcontroller
This document describes a simple discrete PID controller implementation that can be used for applications requiring control of a system output due to changes in reference values or states. The PID controller uses proportional, integral and derivative terms to manipulate process inputs based on error history to provide accurate and stable control. It is implemented using 534 bytes of code memory and 877 CPU cycles on AVR microcontrollers.
Override control system
This document discusses override control systems. An override control system allows one controller to override another by selecting the most critical process value. It describes a system that uses override control to protect a water pump. A level controller overrides a pressure controller to slow the pump speed if the well level drops too low, preventing the pump from running dry while still maintaining some water pressure. This provides a "soft constraint" with moderated action as well as a backup "hard constraint" shutdown for additional safety. Integral windup must be managed when controllers are overridden to prevent control issues.
control system
The document describes the basic elements of process control systems, including measurement, evaluation, and control elements. It provides examples of using a level transmitter, level controller, and control valve to regulate liquid level in a tank. It also discusses using temperature sensors and controllers to regulate process temperature. Block diagrams are presented to illustrate how these elements work together in a control loop. The purposes of open loop and closed loop control systems are also overviewed.
Control system
This document provides information about a control systems course at Muthayammal Engineering College. It includes definitions of a system, control system, and examples. It describes the basic components of a control system including the controller, command input, controlled variable, and disturbances. It also explains open loop and closed loop systems as well as feedback and feedforward control. Mathematical modeling of mechanical systems including rotational and translational systems is discussed. Two relevant YouTube videos are provided.
Pid controller by Mitesh Kumar
This document discusses PID controller tuning. It defines what a PID controller is and its components - proportional, integral and derivative terms. It describes three common methods for tuning PID parameters: Ziegler-Nichols open loop method which relates process parameters to controller parameters; closed loop Ziegler-Nichols method which introduces oscillations and varies parameters; and trial and error method starting with maximum proportional band and minimum other terms then adjusting. Performance criteria for tuning are listed as minimizing error, settling time, and overshoot.
What's hot (19)
6. performance analysis of pd, pid controllers for speed control of dc motor
6. performance analysis of pd, pid controllers for speed control of dc motor
Controller Tuning Method for Non-Linear Conical Tank System
Controller Tuning Method for Non-Linear Conical Tank System
Level Control of Tank System Using PID Controller-A Review
Level Control of Tank System Using PID Controller-A Review
Viewers also liked
process control
This document outlines the details of the Process Dynamics and Control course at UET Lahore Faisalabad Campus. The course code is ChE-411 and it is worth 3 credit hours of theory and 1 credit hour of practical. It will be taught by Dr. Naveed Ramzan and M. Shahzad Zafar. The course covers topics such as feedback and feedforward control, dynamics of first and second order systems, controllers, stability of chemical processes, and frequency response techniques. Main textbooks include books by George Stephanopoulos and Coughanowr and Koppel. The course also includes tutorials, handouts, and a case study developing a control scheme for a complete plant.
block diagram representation of control systems
This document provides an introduction to block diagram representation of control systems. It discusses how block diagrams provide a pictorial representation of the relationships between elements in a system using blocks and arrows. The blocks represent system elements or operations, and the arrows represent the direction of signal or information flow. Specific topics covered include summing points, takeoff points, examples of representing equations as block diagrams, and canonical forms.
Sect 4, standard times, foundation for performance improvement
Stadard times are a foundation for performance improvement in a dealer workshop. This section deals with some of the reason's for deviations and what can be done to correct them.
Simplifying Financial Performance Management Systems
Presentation by Geoff Noble of the CFO Group - September 2014
1. What is Financial Performance Management?
– Why we think it’s important to you as Chartered Accountants
2. Performing a self-assessment health check
– Effectiveness and efficiency scores
– Solution roadmap and business case
3. Implementing a solution
– Critical success factors
– How-to guide for projects
Process Design and control
A presentation providing an introduciton to process dynamics and control with the use of real life applications
Process dynamics and control seborg (2nd edition)
This document outlines a plan to restructure a company's operations to improve efficiency and reduce costs. Key points include consolidating three regional offices into one central location, eliminating redundant roles and functions across departments, and reducing headcount through a voluntary buyout program. The changes are expected to result in annual savings of $5 million once fully implemented over the next 18 months.
Process dynamics and control
This document outlines a plan to restructure a company's operations to improve efficiency and reduce costs. Key points include consolidating three regional offices into one central location, eliminating redundant roles and functions across departments, and reducing headcount through a voluntary buyout program. The changes are expected to result in annual savings of $5 million once fully implemented over the next 18 months.
Process Dynamics and Control
Process Dynamics and Control (2007 Edition) (Hardbound)
By K. T. Jadhav
Size : B5, Pages: 428; Price : Rs. 390.00
Buy this book from : www.chinttanpublications.in
8 Simple Steps For New Product Development By Wayne Chen
Learn How To Manage New Product Development (NDP) With These 8 Simple Steps. By Wayne Chen @MobiWayne. Pocket Square Media.
Feedback Loops
This document discusses key concepts in system dynamics modeling including feedback loops, causal loop diagrams, system archetypes, and an example production management problem. Positive feedback loops are reinforcing, while negative feedback loops aim to reduce discrepancies between the current state and a target or goal. Causal loop diagrams show causal links and influences between variables in a system. Common system archetypes include limits to growth, shifting the burden, eroding goals, escalation, success to the successful, and balancing processes with delay. An example production management problem demonstrates how discrepancies in backlog and raw material levels can be reduced through adjustment of production and ordering rates.
Tuning of pid
This document summarizes two common methods for tuning PID controllers: the Ziegler-Nichols method and the adjust and observe method. The Ziegler-Nichols method involves measuring the process response to changes in proportional gain to determine oscillation parameters, which are then used to calculate initial PID settings. The adjust and observe method iteratively adjusts each PID term - proportional, integral, derivative - while observing the process response to improve performance against design criteria.
Control system lectures
This document provides an overview of control systems. It defines a control system as an interconnection of components that provides a desired response. It discusses open and closed loop systems, control system classification, components, design process, examples, and the future of control systems. The document is being used to provide background on control principles and their engineering applications for a class.
p i d controller
The document discusses the components and characteristics of a PID controller. A PID controller uses proportional, integral and derivative actions to control process variables.
The proportional action depends on current error. The integral action depends on accumulated past errors to eliminate steady-state error over time. The derivative action predicts future errors based on the current rate of change to improve stability and reduce overshoot.
Together these three actions allow a PID controller to control processes very well without overshoot or undershoot by setting the optimal P, I, and D values for the specific application.
Pid controller
This document discusses different types of control systems including proportional (P), proportional-integral (PI), proportional-derivative (PD), and proportional-integral-derivative (PID) control. It provides block diagrams and explanations of how each type of controller works, the effects on steady state and transient response, and limitations. It also provides examples of applying these controllers to a mass-spring-damper system and speed control of a DC motor. Tuning of PID controllers is identified as difficult and alternative future controllers like fuzzy logic are mentioned.
Block diagram Examples
The document provides examples of block diagram reduction techniques. It begins with 12 examples showing the step-by-step process of reducing block diagrams to obtain transfer functions. It then provides block diagram examples of an armature controlled DC motor and a liquid level system. The examples illustrate techniques for moving pickoff points, eliminating feedback loops, and applying rules to reduce block diagrams to single transfer functions.
Control Systems Basics
This document from Northampton Community College provides an overview of control systems basics. It defines key terms like control, controller, open loop and closed loop systems. It explains the main components of a control system including sensors, actuators and feedback. It also discusses different types of controllers, control classifications and factors that can affect control systems like disturbances. The document aims to introduce students to the fundamental concepts and components of industrial control systems.
Class 34 advanced control strategies – feedforward control
This document discusses feedforward control in a process instrumentation and control system. It describes a three-tank system used to control the concentration of a solute stream. Feedforward control is introduced to improve quality of control for frequent load disturbances. A feedforward controller uses information about disturbances detected at the inlet stream to adjust the control valve and prevent changes in the outlet composition from the setpoint. The document provides equations to model the feedforward control system and discusses using constant terms for the feedforward controller transfer function.
Lecture 08 mems fabrication - cantilever example
This document discusses the fabrication process of a cantilever microelectromechanical systems (MEMS) device. The process involves depositing an SiO2 layer on a silicon substrate, patterning it with photoresist and UV light, etching the SiO2, depositing polysilicon, and then removing the sacrificial SiO2 layer to leave a cantilever structure of polysilicon. The document is a set of lecture slides presented by Dr. S. Meenatchi Sundaram on MEMS fabrication processes using a cantilever as an example.
Class 36 advanced control strategies – dead time compensator, selective con...
Class 36 advanced control strategies – dead time compensator, selective con...Manipal Institute of Technology
This document discusses advanced control strategies for processes with time delays, including dead time compensators and selective control. It describes the effects of dead time on process control and introduces the Smith Predictor technique for dead time compensation using a predictive model of the process. Examples are provided to demonstrate PID control performance with and without dead time. Causes of dead time and the impact of model errors on the Smith Predictor approach are also reviewed. Selective control techniques are presented as methods to handle processes with more control variables than actuators.Class 33 advanced control strategies - cascade control
This document discusses cascade control systems for controlling kettle temperature more effectively. A typical single-loop control system for a kettle is not very responsive to disturbances in oil supply temperature. To address this, a cascade control system is proposed with an inner loop to control jacket temperature and an outer loop to control kettle temperature. This allows the secondary controller to respond quickly to disturbances in oil temperature in order to maintain jacket temperature close to the set point. Block diagrams and transfer functions are presented to analyze the cascade control system.
Viewers also liked (20)
Sect 4, standard times, foundation for performance improvement
Sect 4, standard times, foundation for performance improvement
Simplifying Financial Performance Management Systems
Simplifying Financial Performance Management Systems
8 Simple Steps For New Product Development By Wayne Chen
8 Simple Steps For New Product Development By Wayne Chen
Class 34 advanced control strategies – feedforward control
Class 34 advanced control strategies – feedforward control
Class 36 advanced control strategies – dead time compensator, selective con...
Class 36 advanced control strategies – dead time compensator, selective con...
Class 33 advanced control strategies - cascade control
Class 33 advanced control strategies - cascade control
Similar to 5. feedback control[1]
Lectures-CLL361.pdf
This document provides an overview of instrumentation and automation concepts for process control. It begins with an introduction to process control and its importance for safety, environmental, and economic reasons. It then covers control theory basics and components of control loops. The remainder of the document describes various instrumentation components, including sensors, transmitters, controllers, control valves, and programmable logic controllers. It provides examples of experimental computer control systems and discusses different control modes and ladder logic programming.
Inst. & process control gtp
The document provides an overview of instrumentation and process control fundamentals, including key terminology. It describes a basic process control loop using a water tank example where an operator manually controls the water level by opening or closing an inlet valve. The controlled variable is the water level, which is influenced by manipulating the flow through adjustments to the inlet valve. Process control components like sensors, transmitters, controllers and final control elements are also defined.
Instrumentation and process control fundamentals
Basic course covers:
-Basic understanding of process control
-Important process control terminology
-Major components of a process loop
-Instrumentation P&ID symbols
Process control lab manual
1. The document describes several experiments related to process control systems, including temperature control loops, pressure control loops, flow control loops, and level control loops. It also covers programming a PLC and using a distributed control system.
2. The experiments are intended to study the elements of different control loops, take readings by varying set points, and observe the behavior of processes under control.
3. Programming concepts covered include logic gates, adders, multiplexers, and programming a PLC using ladder logic. The document also provides an overview of DCS systems and architectures.
instrument and control value in petrleum
(1) Standard instrument signals for process control include pneumatic (3-15 psig) and electrical (4-20 mA). Measurement transducers typically consist of a sensing element combined with a transmitter.
(2) A transmitter converts a sensor's output to a standard signal like 4-20 mA for input to a controller. Most transmitters are direct-acting and have an adjustable input range.
(3) Control valves are the most common final control elements. Their flow characteristics can be linear, equal percentage, or quick opening depending on the valve trim. Valve sizing considers the required flow rate and available pressure drop.
basicsinstrumentandcontrol-170425220125.pptx
The document provides an overview of an instrumentation and control course, including topics such as pressure, flow, level, and temperature measurement, as well as control valves, loops, and systems. The course contents section details concepts related to process measurement and control, including control loops and components, classifications of control loops, piping and instrumentation diagrams, and basic process measurement terminology.
lesson1et438a (1).ppsx
This document provides an introduction to automatic control systems, including:
- Explaining the functions of control systems like maintaining variables and rejecting disturbances.
- Identifying components in block diagrams representing physical systems.
- Explaining the differences between open-loop and closed-loop control systems.
- Defining transfer functions and computing gains for sinusoidal input/output cases.
- Demonstrating how to reduce block diagram systems using algebra.
PDC NOTES (JAN 2021).pptx
This document discusses process control systems and their components. It describes the main goals of process control as enhancing safety, satisfying environmental constraints, meeting quality specifications, efficiently using resources, and increasing profitability. The key components of a control system are identified as the process, measuring element, controller, and final control element. A block diagram shows a simple closed-loop control system with feedback. Common control system terms are defined, such as deviation variable, error, set point, and negative feedback. Examples of controlled processes include a stirred-tank heater and liquid level control.
Closed loop control systems block diagrams
The document provides an overview of closed-loop control systems. It defines open loop and closed loop systems, with closed loop systems operating in auto mode using feedback. The syllabus covers developing block diagrams for feedback control systems and analyzing servo and regulator problems, controllers, final control elements, and the transient response and stability of closed-loop systems. It also discusses pneumatic and electronic controllers, including their components and differences. Controller types like proportional, PI, PD and PID are defined along with their transfer functions and step responses.
Control system
This document discusses instrumentation and control systems. It provides information on common devices used to measure process variables like pressure, temperature, and flow rate. These include transducers, sensors, and transmitters. It also discusses final control elements like control valves and how they are used to manipulate process variables. The document explains the characteristics of different types of control valves and how their flow properties are defined by equations. It also covers topics like pneumatic control systems, calibration of instruments, and algorithms for digital PID control.
3.10 valves modeling dynamics - engineering libre-texts
1. Valves are modeled to regulate flow within chemical processes. Important components for modeling include flow, valve coefficient (Cv), pressure drop, control valve gain, rangeability, and installed characteristics.
2. Flow through a valve is described by an equation involving Cv, pressure drop, specific gravity, and flow characteristics. There are three main flow characteristics: linear, quick opening, and equal percentage.
3. Control valve gain describes the change in flow with a change in controller signal. It depends on valve characteristics and whether pressure drop is constant or variable. Constant valve gain is desirable for control.
Process Control and Instrumentation.pdf
This document contains class notes on process instrumentations from CHE660 Process Control & Instrumentations taught by Abdul Aziz Ishak at Universiti Teknologi MARA. The notes cover various types of instrumentation including differential pressure transmitters, level transmitters, flow meters, and temperature devices. It discusses the operating principles, advantages, and considerations for differential pressure level transmitters, ultrasonic level transmitters, capacitance level transmitters, magnetic flowmeters, and vortex flowmeters.
BASICS OF AXIAL FLOW COMPRESSOR AND ITS WORKING PRINCIPLE.ppt
This document discusses the analysis and design of axial and centrifugal compressors. It covers topics such as:
- Selection of compressors based on specific speed applications
- Design parameters like pressure ratio, tip speed, and diffusion factor for different compressor stages
- Performance maps and how multi-stage compression affects capacity
- Gas dynamics and thermodynamics concepts applied to compressor stages and impellers
- Parameters that affect compressor efficiency like inlet conditions, blade speed, and fluid deflection
Les vanne a boisson spécial koso parcol.pdf
This document provides information on sizing and selecting control valves. It includes:
- Definitions of flow coefficients Kv and Cv which represent standard flow rates through a valve under specific conditions.
- Process data that should be considered when sizing a valve such as fluid properties, operating flow rates and pressures, and interface requirements.
- Equations to calculate the maximum required flow coefficient based on operating conditions for incompressible, compressible, and two-phase fluids.
- Parameters that influence sizing equations such as pressure recovery factors, piping geometry factors, Reynolds number factors, and more.
- Specification of valve components once sizing is complete, including body size, trim type,
Instrumentation
Instrumentation plays a key role in process automation by measuring and controlling various process variables. Common instrumentation includes transmitters to measure pressure, temperature, level and flow as process variables. Controllers like PID controllers compare the process variable to a set point and operate final control elements, usually valves, to maintain process equilibrium by minimizing differences between the process variable and set point. This closed loop control model is used widely in industrial automation to control temperature, pressure, level and other process conditions.
Chapter_9.ppt
1. Transducers convert process variables like temperature, pressure, and flow rate into electrical signals for controllers. Common transducer configurations include a sensing element combined with a transmitter.
2. Early process instrumentation used pneumatic signals, but electronic instrumentation is now widespread. Transmitters typically convert sensor outputs to standard signals like 4-20 mA that are compatible with controllers.
3. Final control elements like control valves manipulate process variables by adjusting material and energy flows. Control valves are widely used to control fluid flows.
CONTROL VALVE SIZING AND SELECTION FOR ANY APPLICATION.ppt
CONTROL VALVE BASICS.INCLUDING SIZIND, DETAILING AND SELECTION OF MATERIAL.THIS IS APPLICABLE FOR ALL APPLICATIONS LIKE UTILITY, POWER, WATER AND REFINERY. FROM THE PRESENTATION THE DESIGN ENGINEER CAN DECIDE THE TYPE OF CONTROL VALVE AND ITS CHARACTER TO BE SELECTED FOR THE GIVEN APPLICATION.
Control Valve overview and Sizing.pptx
This document provides information on control valve sizing and operation. It defines the key components of a control loop and describes the function of a control valve as the final control element that throttles liquid flow. It then discusses control valve accessories like actuators, pressure regulators, and positioners. The document outlines the types of control valves and their operational characteristics including flow coefficient. It provides the steps for sizing a control valve including calculating the required flow coefficient and selecting a valve size using vendor data sheets while accounting for pressure losses from fittings. An example problem demonstrates applying the sizing procedure.
Introduction to Industrial Instrumentation
This document introduces industrial instrumentation and provides examples. It defines instrumentation as automated measurement and control that is used in research, industry and everyday life. It then lists common process variables that are measured through instrumentation like pressure, flow rate, temperature and lists common control devices. The rest of the document defines key instrumentation terms and provides two examples - a boiler water level control system using pneumatic signals and a wastewater disinfection system using electronic signals.
Similar to 5. feedback control[1] (20)
3.10 valves modeling dynamics - engineering libre-texts
3.10 valves modeling dynamics - engineering libre-texts
BASICS OF AXIAL FLOW COMPRESSOR AND ITS WORKING PRINCIPLE.ppt
BASICS OF AXIAL FLOW COMPRESSOR AND ITS WORKING PRINCIPLE.ppt
CONTROL VALVE SIZING AND SELECTION FOR ANY APPLICATION.ppt
CONTROL VALVE SIZING AND SELECTION FOR ANY APPLICATION.ppt
Recently uploaded
一比一原版(Vancouver毕业证书)温哥华岛大学毕业证如何办理
学校原件一模一样【微信：6496090 】【(Vancouver毕业证书)温哥华岛大学毕业证成绩单】【微信：6496090 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微6496090
【主营项目】
一.毕业证【q微6496090】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微6496090】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(Vancouver毕业证书)温哥华岛大学毕业证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
NHL Stenden University of Applied Sciences Diploma Degree Transcript
办NHL Stenden毕业证书制作荷兰斯坦德应用科技大學假文凭定制Q微168899991办NHL Stenden留信网教留服认证海牙认证改NHL Stenden成绩单GPA办NHL Stenden高仿学位证毕业证电子版ID驾照如何申请斯坦德应用科技NHL Stenden University of Applied Sciences Diploma Degree Transcript
Getting Data Ready for Culture Hack by Neontribe
Sometime in the 2010s, this is how explained how to make data "hackday ready"
一比一原版南安普顿索伦特大学毕业证Southampton成绩单一模一样
原件一模一样【微信：6496090】【南安普顿索伦特大学毕业证Southampton学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理南安普顿索伦特大学毕业证Southampton学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版马里兰大学毕业证(UMD毕业证书)如何办理
学校原件一模一样【微信：6496090】【马里兰大学毕业证(UMD毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理马里兰大学毕业证(UMD毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版布兰登大学毕业证(BU毕业证书)如何办理
学校原件一模一样【微信：6496090】【布兰登大学毕业证(BU毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理布兰登大学毕业证(BU毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版美国哥伦比亚大学毕业证Columbia成绩单一模一样
原件一模一样【微信：6496090】【美国哥伦比亚大学毕业证Columbia学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理美国哥伦比亚大学毕业证Columbia学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
一比一原版肯特大学毕业证UKC成绩单一模一样
原件一模一样【微信：6496090】【肯特大学毕业证UKC学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理肯特大学毕业证UKC学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理肯特大学毕业证UKC学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理肯特大学毕业证UKC学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理肯特大学毕业证UKC学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Heuristics Evaluation - How to Guide.pdf
This guide helps identify potential issues related to navigation, clarity, consistency, and other factors that can affect user experience.
AHMED TALAAT ARCHITECTURE PORTFOLIO .pdf
Architectural and constructions management experience since 2003 including 18 years located in UAE.
Coordinate and oversee all technical activities relating to architectural and construction projects,
including directing the design team, reviewing drafts and computer models, and approving design
changes.
Organize and typically develop, and review building plans, ensuring that a project meets all safety and
environmental standards.
Prepare feasibility studies, construction contracts, and tender documents with specifications and
tender analyses.
Consulting with clients, work on formulating equipment and labor cost estimates, ensuring a project
meets environmental, safety, structural, zoning, and aesthetic standards.
Monitoring the progress of a project to assess whether or not it is in compliance with building plans
and project deadlines.
Attention to detail, exceptional time management, and strong problem-solving and communication
skills are required for this role.
International Upcycling Research Network advisory board meeting 4
Slides used for the International Upcycling Research Network advisory board 4 (last one). The project is based at De Montfort University in Leicester, UK, and funded by the Arts and Humanities Research Council.
一比一原版阿肯色大学毕业证(UCSF毕业证书)如何办理
学校原件一模一样【微信：6496090】【阿肯色大学毕业证(UCSF毕业证书)成绩单学位证】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理阿肯色大学毕业证(UCSF毕业证书)【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
哪里办理美国中央华盛顿大学毕业证双学位证书原版一模一样
原版一模一样【微信：741003700 】【美国中央华盛顿大学毕业证双学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
按照学校原版(UIUC文凭证书)伊利诺伊大学|厄巴纳-香槟分校毕业证快速办理
出售【(UIUC毕业证书)伊利诺伊大学|厄巴纳-香槟分校毕业证】【176555708微信号】海外认证成绩单、外壳、offer、留信学历认证（永久存档真实可查）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【我们承诺采用的是学校原版纸张（纸质、底色、纹路），我们拥有全套进口原装设备，特殊工艺都是采用不同机器制作，仿真度基本可以达到100%，所有工艺效果都可提前给客户展示，不满意可以根据客户要求进行调整，直到满意为止！】
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信176555708】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信176555708】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
留信网服务项目：
1、留学生专业人才库服务（留信分析）
2、国（境）学习人员提供就业推荐信服务
3、留学人员区块链存储服务
→ 【关于价格问题（保证一手价格）】
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：客户在留信官方认证查询网站查询到认证通过结果后付款，不成功不收费！
一比一原版马来西亚世纪大学毕业证成绩单一模一样
原件一模一样【微信：6496090】【马来西亚世纪大学毕业证学位证成绩单】【微信：6496090】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
【业务选择办理准则】
一、工作未确定，回国需先给父母、亲戚朋友看下文凭的情况，办理一份就读学校的毕业证【微信：6496090】文凭即可
二、回国进私企、外企、自己做生意的情况，这些单位是不查询毕业证真伪的，而且国内没有渠道去查询国外文凭的真假，也不需要提供真实教育部认证。鉴于此，办理一份毕业证【微信：6496090】即可
三、进国企，银行，事业单位，考公务员等等，这些单位是必需要提供真实教育部认证的，办理教育部认证所需资料众多且烦琐，所有材料您都必须提供原件，我们凭借丰富的经验，快捷的绿色通道帮您快速整合材料，让您少走弯路。
留信网认证的作用:
1:该专业认证可证明留学生真实身份【微信：6496090】
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
办理马来西亚世纪大学毕业证学位证【微信：6496090 】外观非常精致，由特殊纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理马来西亚世纪大学毕业证学位证【微信：6496090 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理马来西亚世纪大学毕业证学位证【微信：6496090 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理马来西亚世纪大学毕业证学位证【微信：6496090 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...Designforuminternational
India’s architectural landscape is a vibrant tapestry that weaves together the country's rich cultural heritage and its modern aspirations. From majestic historical structures to cutting-edge contemporary designs, the work of Indian architects is celebrated worldwide. Among the many firms shaping this dynamic field, Design Forum International stands out as a leader in innovative and sustainable architecture. This blog explores some of the best Indian architects, highlighting their contributions and showcasing the most famous architects in India.ARENA - Young adults in the workplace (Knight Moves).pdf
Presentations of Bavo Raeymaekers (Project lead youth unemployment at the City of Antwerp), Suzan Martens (Service designer at Knight Moves) and Adriaan De Keersmaeker (Community manager at Talk to C)
during the 'Arena • Young adults in the workplace' conference hosted by Knight Moves.
定制美国西雅图城市大学毕业证学历证书原版一模一样
原版一模一样【微信：741003700 】【美国西雅图城市大学毕业证学历证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
NHL Stenden University of Applied Sciences Diploma Degree Transcript
NHL Stenden University of Applied Sciences Diploma Degree Transcript
Introduction to User experience design for beginner
Introduction to User experience design for beginner
International Upcycling Research Network advisory board meeting 4
International Upcycling Research Network advisory board meeting 4
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
Discovering the Best Indian Architects A Spotlight on Design Forum Internatio...
ARENA - Young adults in the workplace (Knight Moves).pdf
ARENA - Young adults in the workplace (Knight Moves).pdf
5. feedback control[1]
- 1. Chemical Process Dynamics and Control Feedback Control Eng. Misael González Macias
- 5. Sensors and Transmitters ST(s ) Process Variable PV(s) Transmitter Output TO(s)
- 13. Concept of Feedback Control Process m d y Process m d y Final Control Element Sensor/ transmitter Controller y sp y m c e Open loop Closed loop Controller Mechanism - +
- 14. Typical Feedback Control Systems Flow Control
- 15. Typical Feedback Control Systems Pressure Control Liquid-Level Control
- 16. Typical Feedback Control Systems Temperature Control Liquid-Level Control
- 17. Representation of Feedback Loops FC for flow control PC for pressure control LC for liquid-level control TC for temperature control CC for composition control FT for flow transmiser PC for pressure transmiser LC for liquid-level transmiser TC for temperature transmiser CC for composition transmiser
- 18. Representation of Feedback Loops Example Control valves on a flash drum See also Apendix A of A. Smith and A. B. Corripio, Control Automático de Procesos, Limusa