The document discusses various sheet metal processes and forming techniques. It covers sheet metal characteristics and common operations like shearing, bending, drawing, and stretch forming. It also describes special forming processes such as hydroforming, rubber pad forming, spinning, explosive forming, magnetic pulse forming, and super plastic forming. Test methods for measuring formability are discussed as well. The document provides an overview of the different processes used to work with sheet metals.
Processes based on fluidity and solidification, or simply “casting”, include manufacturing techniques whereby molten material is poured or forced into a mould and allowed to harden. Appropriate variants of this technique are particularly suitable for the economical production of complex shapes, ranging from mass-produced parts for the automotive industry to one-of-a-kind production of jewellery or massive machinery.
Introduction to casting, Major classifications of casting, Casting terminology, Characteristics of molding sand, Constituents of foundry sand, Patterns and their types, Cores and types of cores, Gating system, Types of gates, Solidification, Riser system, Types of riser, Types of allowances, Directional Solidification, Defects in casting, Riser design(Chvorinov's rules), Advanced casting techniques:Shell molding, Permanent mould casting, Vacuum die casting, Low pressure die casting, Continuous casting, Squeeze casting, Slush casting, Vacuum casting, Die Casting, Centrifugal casting, Investment casting
Processes based on fluidity and solidification, or simply “casting”, include manufacturing techniques whereby molten material is poured or forced into a mould and allowed to harden. Appropriate variants of this technique are particularly suitable for the economical production of complex shapes, ranging from mass-produced parts for the automotive industry to one-of-a-kind production of jewellery or massive machinery.
Introduction to casting, Major classifications of casting, Casting terminology, Characteristics of molding sand, Constituents of foundry sand, Patterns and their types, Cores and types of cores, Gating system, Types of gates, Solidification, Riser system, Types of riser, Types of allowances, Directional Solidification, Defects in casting, Riser design(Chvorinov's rules), Advanced casting techniques:Shell molding, Permanent mould casting, Vacuum die casting, Low pressure die casting, Continuous casting, Squeeze casting, Slush casting, Vacuum casting, Die Casting, Centrifugal casting, Investment casting
Introduction to casting, Major classifications of casting, Casting terminology, Characteristics of molding sand, Constituents of foundry sand, Patterns and their types, Cores and types of cores, Gating system, Types of gates, Solidification, Riser system, Types of riser, Types of allowances, Directional Solidification, Defects in casting, Riser design(Chvorinov's rules), Advanced casting techniques:Shell molding, Permanent mould casting, Vacuum die casting, Low pressure die casting, Continuous casting, Squeeze casting, Slush casting, Vacuum casting, Die Casting, Centrifugal casting, Investment casting
Preparing a metal specimen for microscopic examination Saif al-din ali
1.Name of Experiment:
Preparing a Metal Specimen for Microscopic Examination.
2.The objective of the Experiment
a. The determination of the size and shape of the grains.
b. To specify what forms are present.
c. To find if the specimen has undergone plastic or elastic deformation.
d. To search for impurities.
e. To find if it has inferior any phase changes
Presentation study of manufacturing process in hmt machine tools limited.docxAbu Sufyan Malik
Manufacturing is the production of products for use or sale using labour and machines, tools, chemical and biological processing, or formulation, and is the essence of secondary industry. The term may refer to a range of human activity, from handicraft to high-tech, but is most commonly applied to industrial design, in which raw materials from primary industry are transformed into finished goods on a large scale. Such finished goods may be sold to other manufacturers for the production of other more complex products or distributed via the tertiary industry to end users and consumers (usually through wholesalers, who in turn sell to retailers, who then sell them to individual customers).
Manufacturing engineering or manufacturing process are the steps through which raw materials are transformed into a final product. The manufacturing process begins with the product design, and materials specification from which the product is made. These materials are then modified through manufacturing processes to become the required part.
The manufacturing sector is closely connected with engineering and industrial design. Examples of major manufacturers in North America include General Motors Corporation, General Cast Parts. Examples in Europe include Volkswagen Group, Siemens, FCA and Michelin. Examples in Asia include Toyota, Yamaha, Panasonic, LG, Samsung and Tata Motors.
This PPT will let you know about metal casting and more specifically about the type of casting that is, Die casting, types of die casting, Cleaning of castings and inspection of casting
Introduction to casting, Major classifications of casting, Casting terminology, Characteristics of molding sand, Constituents of foundry sand, Patterns and their types, Cores and types of cores, Gating system, Types of gates, Solidification, Riser system, Types of riser, Types of allowances, Directional Solidification, Defects in casting, Riser design(Chvorinov's rules), Advanced casting techniques:Shell molding, Permanent mould casting, Vacuum die casting, Low pressure die casting, Continuous casting, Squeeze casting, Slush casting, Vacuum casting, Die Casting, Centrifugal casting, Investment casting
Preparing a metal specimen for microscopic examination Saif al-din ali
1.Name of Experiment:
Preparing a Metal Specimen for Microscopic Examination.
2.The objective of the Experiment
a. The determination of the size and shape of the grains.
b. To specify what forms are present.
c. To find if the specimen has undergone plastic or elastic deformation.
d. To search for impurities.
e. To find if it has inferior any phase changes
Presentation study of manufacturing process in hmt machine tools limited.docxAbu Sufyan Malik
Manufacturing is the production of products for use or sale using labour and machines, tools, chemical and biological processing, or formulation, and is the essence of secondary industry. The term may refer to a range of human activity, from handicraft to high-tech, but is most commonly applied to industrial design, in which raw materials from primary industry are transformed into finished goods on a large scale. Such finished goods may be sold to other manufacturers for the production of other more complex products or distributed via the tertiary industry to end users and consumers (usually through wholesalers, who in turn sell to retailers, who then sell them to individual customers).
Manufacturing engineering or manufacturing process are the steps through which raw materials are transformed into a final product. The manufacturing process begins with the product design, and materials specification from which the product is made. These materials are then modified through manufacturing processes to become the required part.
The manufacturing sector is closely connected with engineering and industrial design. Examples of major manufacturers in North America include General Motors Corporation, General Cast Parts. Examples in Europe include Volkswagen Group, Siemens, FCA and Michelin. Examples in Asia include Toyota, Yamaha, Panasonic, LG, Samsung and Tata Motors.
This PPT will let you know about metal casting and more specifically about the type of casting that is, Die casting, types of die casting, Cleaning of castings and inspection of casting
Sheet metal characteristics - Typical shearing operations, bending and drawing operations – Stretch forming operations –– Formability of sheet metal – Test methods – Working principle and application of special forming processes - Hydro forming – Rubber pad forming – Metal spinning – Introduction to Explosive forming, Magnetic pulse forming, Peen forming, Super plastic forming.
Conventional processes- Explosive forming, electro-hydraulic
forming, magnetic pulse forming – Principles and process
parameters- Advantages- Limitations and Applications
Metrology Measurements and All units PPTdinesh babu
Metrology is the science of measurement, embracing both experimental and theoretical determinations at any level of uncertainty in any field of science and technology
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
AKS UNIVERSITY Satna Final Year Project By OM Hardaha.pdf
Unit iv
1. SHEET METAL PROCESSES
Sheet metal characteristics - Typical shearing operations, bending and
drawing operations – Stretch forming operations –– Formability of sheet
metal – Test methods – Working principle and application of special
forming processes - Hydro forming – Rubber pad forming – Metal
spinning – Introduction to Explosive forming, Magnetic pulse forming,
Peen forming, Super plastic forming.
2. Introduction
The working of metal thickness from 3mm to 5mm
with hand tools and simple machines into various
forms is known as sheet metal work.
Sheet metals
Black iron
Galvanized iron
Stainless steel
Brass
Copper
Zinc , Aluminium, tin plate and lead.
15. - Roll Forming
If the edges are formed to a desired shape in the form of bend is
made on the sheet metal
- Seaming
The process of providing lock between the two edges of the
different work metal.
SHEARING OPERATION - DRAWING
- Deep Drawing
Length of the part drawn is deeper then width.
- Box Drawing
Length of the part drawn is lesser then width
16. STRETCH FORMING OPERATION
Stretching is the process of stressing the work blank beyond its elastic limit
by moving a form block towards the blank.
FORM BLOCK METHOD
25. 3.0 METAL SPINNING
a) Manual Spinning
b) Power Spinning
Applications: Ash trays, flower pots, lamp shades, missile and radar units
26. 4).EXPLOSIVE FORMING PROCESSES
- Stand off operations
The explosive charge is located at some distance away from the blank
and energy is transmitted through some fluid medium such as water.
- Contact Operations
The explosive charge is directly located over the blank.
AEROSPACE COMPONENTS
27. Electro magnetic forming
The energy stored in a capacitor bank is discharged
rapidly through a magnetic coil.
EX: a ring shaped coil is placed over a tubular
workpiece.
Depends upon the shape of the die the tube will
deform when the magnetic force pushes the metal.
YoucaN
31. 7.0 SUPER PLASTIC FORMING PROCESS
a) Loading
b) Forming
c) Forming
d) Release
32. Advantage:
One step process
Minimizes amount of scrap
Higher material elongation possible
Application:
Forming of– automotive body panels, aircraft frames
36. BASIC SHEARING OPERATION
2.0 Forming operations
(a) Bending
(b) Drawing
(c) Sequeezing
(d) Embossing
(e) Nibbling
It is an operation of cutting any shape from sheet metal
without special tools. It is done on a nibbling machine.
37. FORMABILITY OF SHEETMETAL
Formability = f(f1, f2)
F1 = Material Variables - ductility
F2 = Process Variables – stress system, lubrication, die design etc
Law 1 – Process of fracturing
Ductility of the same material is lower if the section size is large.
Law 2 –Law of geometrical Similitude
1 Blank are geometrically similar to dimension, thickness, width etc.
2 Unit strain at corresponding locations are identical
3 Forces required directly proportional to the square of the thickness
.
4 Consumption of work proportional to the cube of its thickness.
38. FORMABILITY TEST METHOD
1 Formability tests for bulk deformation
Elastic deformation and Plastic deformation
2 Formability test for elastic plastic deformation
1) Tensile test
a) Stretch forming - local thinning
b) Drawing operation – Lower punch by thinning under bi-axial stresses.
2) Simulative tests
a)Erichsen test – Stretchability based on erichsen number
b)Olsen test
c) Swift test - based on blank to punch diameter- drawing ratio
d) Fukui test – both assessed - based on formability index