The document discusses redistributing routes between routing protocols. It provides configuration examples of redistributing OSPF routes into EIGRP on router R1. The key command for redistribution is "redistribute" in router configuration mode. Metrics are also configured on R1 using the "default-metric" command to redistribute OSPF routes into EIGRP.

1. Redistribution
into EIGRP
www.netprotocolxpert.in

2. – When a network consist of more than one routing protocol, there
could be need to advertise routes learned by one routing protocol
into another and vice versa.
– In such a case you may want to take advantage of route
redistribution feature. A simple redistribution is quite easy to do.
The main configuration command is ‘redistribute’ which is used in
EIGRP configuration mode.

3. Redistribution into EIGRP

4. R1
– R1(config)#interface FastEthernet0/0
– R1(config-if)#description to R3
– R1(config-if)#ip address 10.0.0.1 255.255.255.0
– R1(config-if)#no shutdown
– R1(config)#interface FastEthernet0/1
– R1(config-if)#description to R2
– R1(config-if)#ip address 10.0.1.1 255.255.255.0
– R1(config-if)#no shutdown
– R1(config)#router eigrp 1
– R1(config-router)#network 10.0.0.0 0.0.0.255
– R1(config-router)#no auto-summary
– R1(config)#router ospf 1
– R1(config-router)#network 10.0.1.0 0.0.0.255 area 0

5. R2
– R2(config)#interface Loopback0
– R2(config-if)#ip address 192.168.0.1 255.255.255.0
– R2(config)#interface Loopback1
– R2(config-if)#ip address 192.168.1.1 255.255.255.0
– R2(config)#interface FastEthernet0/0
– R2(config-if)#description to R1
– R2(config-if)#ip address 10.0.1.2 255.255.255.0
– R2(config-if)#no shutdown
– R2(config)#router ospf 1
– R2(config-router)#network 10.0.1.0 0.0.0.255 area 0
– R2(config-router)#network 192.168.0.0 0.0.0.255 area 0
– R2(config-router)#network 192.168.1.0 0.0.0.255 area 0

6. R3
– R3(config)#interface FastEthernet0/0
– R3(config-if)# description to R1
– R3(config-if)# ip address 10.0.0.2 255.255.255.0
– R3(config-if)#no shutdown
– R3(config)#router eigrp 1
– R3(config-router)#network 10.0.0.0 0.0.0.255
– R3(config-router)#no auto-summary

7. Now R1 with R3 should be EIGRP neighbors and R1 with R2
OSPF neighbors, check them with show ip eigrp
neighbors and show ip ospf neighbor commands.
To do redistribution from another routing protocol into EIGRP you have to
use redistribute command as a router eigrp subcommand. Further there are
several options: protocol from which to take routes, it could be Connected, Static,
OSPF, EIGRP, ISIS, BGP, RIP. If choose OSPF, further you must type OSPF Process
from which to take routes, optional there is match keyword which let you choose
routes, external or NSSA external routes to be redistributed. Besides all these you
must configure metric values on Router R1: you can set them for all redistributions
commands by using default-metric command, for single redistributions command
by setting metric under it, and the third method is setting different component
metrics to different routes from a route source by using route-map under
redistribution command. We use default-metric and you can see that in next
config.

8. R1
– R1(config)#router eigrp 1
– R1(config-router)#redistribute ospf 1
– R1(config-router)#default-metric 100 10 255 5 1500
R2
– R2(config)#ip route 0.0.0.0 0.0.0.0 FastEthernet0/0

9. Routes Redistribution into EIGRP

10. Ping results

11. Follow Us On
https://www.facebook.com/Net
ProtocolXpert/
https://www.linkedin.com/co
mpany/netprotocol-xpert
https://plus.google.com/u/0/
collection/AYQ-EB
https://www.instagram.com/n
etprotocol_xpert/
https://twitter.com/NPX_cisco
https://branded.me/netproto
colxpert