Embedded real time clock based industrial devices control system
•Download as DOCX, PDF•
0 likes•1,029 views
This document describes an embedded real-time clock based industrial device control system developed by Logic Mind Technologies. The system uses a PIC microcontroller interfaced with a DS1307 real-time clock chip to programmatically switch on heavy machinery and devices only during needed time periods, in order to reduce electrical energy wastage. A 3V battery is connected to the real-time clock to avoid disturbances from power failures. The system provides control switches to enter required timings and displays the alarm times and current time on a 2x16 LCD. It was developed as a solution for industrial sites where machinery operates and wastes power during time periods with low worker activity.
Report
Share
Report
Share
Recommended
Arduino_based_inverter_using_matlab
The document is a project report submitted by four students for their B.Tech degree in Electrical Engineering. It discusses the design of an Arduino-based power inverter using MATLAB. The objective is to design a low-cost inverter compared to commercially available options. The report includes chapters on the history of inverters, components used including Arduino, MOSFETs, transformers and batteries. It also discusses simulations of inverter circuits and the design of the Arduino-based inverter circuit.
Street Light that Glows on Detecting Vehicle Movement
This ppt describes how to detect vehicle movement on highways to switch ON only a block of street lights ahead of it (vehicle), and to switch OFF the trailing lights to save energy.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
3D ICs
The document presents information on 3D integrated circuits (3D ICs). It discusses the idea for 3D ICs to reduce delays and power consumption compared to 2D chips. It describes 3D IC architecture as stacking layers of active components vertically and horizontally. The manufacturing technologies for 3D ICs include monolithic, wafer on wafer, die on wafer, and die on die approaches. Advantages of 3D ICs include reduced wiring, capacitances, power dissipation, and improved performance. Concerns include thermal and reliability issues. Research is ongoing to introduce cheaper 3D ICs for applications like memory.
Heart beat monitor using AT89S52 microcontroller
We , in this project are measuring the heart beat using the pulse oximetry logic.
The timer we have set for counting the heart beat is 30s.
There is a set point we can decide, after 30 s the heartbeat would be shown on the LCD along with a buzzer sound (if it exceeds the set point).
SPICE LEVEL I/LEVEL II/LEVEL III AND BSIM MODELS
SPICE LEVEL I/LEVEL II/LEVEL III AND BSIM MODELS
SPICE introduction
working
adaptions
detailed discussion on each models
SPICE Modeling in BSIM
features
bulk voltage on large signal model
velocity saturation
weak inversion operation
impact ionization
ieee projects list
We offer guidance and support to M.tech students in their final year projects and mini projects. We also assist in paper publication and thesis on projects in Microelectronics, VLSI, Embedded Systems, Electronics and Communication, Electrical and Electronics specializations.
Students may contact us for final year projects based on H-Spice, P-Spice, Tanner EDA, Xilinx FPGA Implementation (VHDL, Verilog HDL), Modelsim, Network Simulator 2, Cadence Orcad, Matlab, AVR Studio, Proteus and others.
GSM Module
A GSM module presentation as a part of one complete course about using communication modules along with PIC-Micro-controller
Thanks.
Nuclear battery ppt
This seminar presentation provides an overview of nuclear batteries. It discusses the need for reliable, long-lasting power sources and how nuclear batteries address this need. The presentation covers the historical development of nuclear batteries, including early work in the 1950s. It then explains the two main energy production mechanisms - betavoltaics which uses beta particles and direct charging generators which use alpha particles. Key factors in fuel selection like half-life and cost are also outlined. The presentation reviews advantages like long lifespan and high energy density as well as disadvantages such as high production costs. It concludes by discussing applications of nuclear batteries in areas like space, medical devices, and military uses.
Recommended
Arduino_based_inverter_using_matlab
The document is a project report submitted by four students for their B.Tech degree in Electrical Engineering. It discusses the design of an Arduino-based power inverter using MATLAB. The objective is to design a low-cost inverter compared to commercially available options. The report includes chapters on the history of inverters, components used including Arduino, MOSFETs, transformers and batteries. It also discusses simulations of inverter circuits and the design of the Arduino-based inverter circuit.
Street Light that Glows on Detecting Vehicle Movement
This ppt describes how to detect vehicle movement on highways to switch ON only a block of street lights ahead of it (vehicle), and to switch OFF the trailing lights to save energy.
Edgefxkits.com has a wide range of electronic projects ideas that are primarily helpful for ECE, EEE and EIE students and the ideas can be applied for real life purposes as well.
http://www.edgefxkits.com/
Visit our page to get more ideas on popular electronic projects developed by professionals.
Edgefx provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
3D ICs
The document presents information on 3D integrated circuits (3D ICs). It discusses the idea for 3D ICs to reduce delays and power consumption compared to 2D chips. It describes 3D IC architecture as stacking layers of active components vertically and horizontally. The manufacturing technologies for 3D ICs include monolithic, wafer on wafer, die on wafer, and die on die approaches. Advantages of 3D ICs include reduced wiring, capacitances, power dissipation, and improved performance. Concerns include thermal and reliability issues. Research is ongoing to introduce cheaper 3D ICs for applications like memory.
Heart beat monitor using AT89S52 microcontroller
We , in this project are measuring the heart beat using the pulse oximetry logic.
The timer we have set for counting the heart beat is 30s.
There is a set point we can decide, after 30 s the heartbeat would be shown on the LCD along with a buzzer sound (if it exceeds the set point).
SPICE LEVEL I/LEVEL II/LEVEL III AND BSIM MODELS
SPICE LEVEL I/LEVEL II/LEVEL III AND BSIM MODELS
SPICE introduction
working
adaptions
detailed discussion on each models
SPICE Modeling in BSIM
features
bulk voltage on large signal model
velocity saturation
weak inversion operation
impact ionization
ieee projects list
We offer guidance and support to M.tech students in their final year projects and mini projects. We also assist in paper publication and thesis on projects in Microelectronics, VLSI, Embedded Systems, Electronics and Communication, Electrical and Electronics specializations.
Students may contact us for final year projects based on H-Spice, P-Spice, Tanner EDA, Xilinx FPGA Implementation (VHDL, Verilog HDL), Modelsim, Network Simulator 2, Cadence Orcad, Matlab, AVR Studio, Proteus and others.
GSM Module
A GSM module presentation as a part of one complete course about using communication modules along with PIC-Micro-controller
Thanks.
Nuclear battery ppt
This seminar presentation provides an overview of nuclear batteries. It discusses the need for reliable, long-lasting power sources and how nuclear batteries address this need. The presentation covers the historical development of nuclear batteries, including early work in the 1950s. It then explains the two main energy production mechanisms - betavoltaics which uses beta particles and direct charging generators which use alpha particles. Key factors in fuel selection like half-life and cost are also outlined. The presentation reviews advantages like long lifespan and high energy density as well as disadvantages such as high production costs. It concludes by discussing applications of nuclear batteries in areas like space, medical devices, and military uses.
INTEGRATED CIRCUIT
1. Integrated circuits are small chips that can function as amplifiers, oscillators, timers, microprocessors, or computer memory. They are made on silicon wafers that can hold hundreds to millions of transistors, resistors, and capacitors.
2. The manufacturing process involves using computer-designed construction plans and masks to precisely grow silicon crystals, cut wafers, and selectively deposit insulating and conducting layers through repeated photolithography and etching steps.
3. After components are built up layer by layer, metal wires are deposited and patterned to connect the components, forming the working circuits on the chip. Finished chips are tested before packaging and distribution.
3 d integrated circuits
3D integrated circuits stack active electronic components in multiple layers within a single circuit to reduce wasted space and improve interconnectivity between components. This allows both homogenous and heterogeneous chips to be accommodated. The substrate is divided into tiers with similar components stacked together to ease interconnections. Fabrication methods include beam recrystallization, processed wafer bonding, and solid phase crystallization. Routing in 3D considers multiple layers and placement of inter-wafer vias to reduce delays. MAGIC layout editing software provides bonding commands to treat layered designs as single entities. 3D ICs provide significant improvements over conventional 2D designs.
Actuation in mems
This document discusses microelectromechanical systems (MEMS) and electrostatic micro-actuators. It explains that MEMS integrate sensors, actuators and electronics on a silicon substrate using microfabrication technology. Electrostatic micro-actuators consist of thin fingers that are actuated by applying a voltage, generating an attractive electrostatic force due to fringing fields. The document derives equations for the electrostatic energy and force in a parallel plate capacitor model, showing that the force is independent of gap size. It describes the pull-in effect, where the gap decreases until reaching 2/3 of the original spacing, at which point the plates suddenly contact.
3d i cs_full_seminar_report
The document discusses 3D integrated circuits (ICs) as an alternative to increasing chip area in 2D ICs. It provides motivation for 3D ICs by explaining how interconnect delays are becoming the dominant factor limiting performance as technologies scale. Summarizing key points:
1. Interconnect delays are increasing faster than gate delays as technologies scale, limiting performance gains from device scaling alone.
2. 3D chip stacking can help address this by reducing wire lengths and capacitances through short vertical interconnects between layers.
3. 3D ICs also enable heterogeneous integration of different technologies like digital, analog and RF on a single chip through separate layers.
Fpga intro1
This document provides an overview of Field Programmable Gate Arrays (FPGAs). It discusses that FPGAs are programmable logic devices with a 2D array of logic blocks and flip-flops that can be configured by the user. The document outlines the core components of an FPGA including logic blocks, look-up tables, multiplexers, flip-flops, and programmable interconnections. It also describes different FPGA programming technologies such as SRAM, antifuse, EPROM, and EEPROM programming. The document concludes by discussing FPGA advantages such as rapid prototyping and reconfigurability compared to ASICs.
Automatic dipper light control for vehicles
day, also the technology has developed but the safety factor is always
needed to be considered. Now a day’s vehicles come fitted with lots of safety features. One of the essential safety feature that need
to be installed is automatic upper-dipper control of headlight, this feature can mainly use during night time driving. Human eyes
are very sensitive to the light, if eyes suddenly comes in contact with the light after darkness, cornea present in eyes gets contract
i.e. vision gets blank and require some time to recover the vision. Many times the situation comes when suddenly vehicle
approaches from front with headlight in upper mode causes blindness to the eyes of the driver. During that time vehicle covers
some amount of distance, here chances of accident may occur. It is a sheer luck if person goes safely through that situation. To
overcome this manual dipping problem, an automatic mechanism has made to dip the headlight automatically whenever situation
occurs. This can reduce number of accidents during night time and provide comfortable driving. Operating principle, working
and design of PCB is briefly discussed in this paper.
Key Words: Automatic Control, Headlight, Upper, Dipper, etc...
Embedded system seminar
Embedded systems combine both hardware and software to form an integral part of a larger system or machine. They are designed to perform specific tasks, such as controlling an engine or processing signals in real time, without human intervention. Examples include processors in cars, robots, televisions, and consumer electronics. Embedded systems have a long design life cycle that involves acquiring components, testing and certifying the system, planning logistics and repairs, and potentially upgrading the system over time. Many embedded systems now also connect to the internet, allowing consumer products and industrial equipment to access online services. Common application areas of embedded systems include the military, automotive, medical, telecommunications, consumer, and industrial sectors.
Presentation
This document presents a project for an automatic college bell system. It uses a microcontroller and real-time clock to ring the bell according to a pre-programmed schedule, saving manpower costs compared to a manual system. The system consists of an AT89S8252 microcontroller, DS1307 real-time clock, 7805 voltage regulator, step-down transformer, crystal oscillator, relays, resistors, transistors, LEDs, seven segment displays, keypad, and buzzer. It is powered by a 5V supply and can accurately ring the bell according to the college timetable without needing a person to operate it manually.
integrated circuits
First op amps built in 1930’s-1940’s
Technically feedback amplifiers due to only having one useable input
Used in WW-II to help how to strike military targets
Buffers, summers, differentiators, inverters
Took ±300V to ± 100V to power
Rf based home automation
This document describes a student project to create a home automation control system using an RF remote control. It includes a cover page with the project title and student names. It also includes sections on an introduction, circuit diagram, the program used, component descriptions, the scope and uses of the project, and conclusions. The project uses an RF transmitter and receiver, microcontroller, TRIAC, and other components to allow controlling electrical loads like lights and appliances remotely via an RF remote control.
Latest Electrical Mini Projects For EEE Students
Simple Mini Projects For EEE Can Be Implemented By Using Microcontroller And Different Technologies. We Hope That Our Innovative Projects For EEE Students Offer Immense Help And Make Them Select Suitable Projects For Their Project Work.
https://www.elprocus.com
Visit our page to get more ideas on Electrical Mini Projects developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Differnce bw bjt & fet
The document compares the applications of bipolar junction transistors (BJTs) and field effect transistors (FETs). BJTs are preferred for low current applications and applications requiring high gain and fast response, while FETs are preferred for low voltage, high frequency, and wide load variation applications. FETs also have advantages of lower power consumption, smaller size, stability at high temperatures, and being easier to fabricate at large scale. Key differences are that BJTs require continuous current to remain on while FETs only require a charged gate, and FETs have extremely high input impedance making them suitable for amplifiers.
3d ic's ppt..
3D packaging stacks separate chips in a single package to save space without integrating the chips. Monolithic 3D ICs build components in layers on a single wafer then dice it, avoiding alignment and bonding issues. Multi-wafer 3D ICs build components on separate wafers, which must be aligned, bonded, and thinned with vertical connections added through silicon vias. 3D ICs promise benefits like reduced cost from improved yield, lower power from shorter wires, and new design possibilities from added connectivity, but challenges include heat dissipation, design complexity, and testing of independent dies.
Easiest Monolithic 3D IC
A Game Changing technology, enabling monolithic 3D IC integration to any fab line without the need for change in the transistor process
Function generator
Function generators are electronic test equipment that generate different types of electrical waveforms over a wide range of frequencies. They produce common waveforms like sine, square, triangular, and sawtooth shapes. More advanced function generators called arbitrary waveform generators can produce any digitally defined waveform. Function generators allow evaluating frequency response of circuits by sweeping frequency between limits.
Microwave Power Transmission
A great concern has been voiced in recent years over the extensive use of energy, the limited supply of resources, and the pollution of the environment from the use of present energy conversion systems. Electrical power accounts for much of the
energy consumed. Much of this power is wasted during transmission from power plant generators to the consumer. The
resistance of the wire used in the electrical grid distribution system causes a loss of 26-30% of the energy generated. This loss implies that our present system of electrical distribution is only 70-74% efficient.
Nikola Tesla is best known for his remarkable statements regarding the wireless transmission of electrical power. His first efforts towards this end started in 1891 and were intended to simply "disturb the electrical equilibrium in the nearby portions of the earth... to bring into operation in any way some instrument." In other words the object of his experiments was simply to produce effects locally and detect them at a distance.
Vlsi
This document discusses VLSI (Very Large Scale Integration) technology and Moore's Law. It covers key topics like transistor scaling, breakthroughs in transistor size and wafer size, challenges in VLSI design, and examples of integrated circuit cost metrics from 1994. Moore's Law, which states that the number of transistors on a chip doubles every 18 months, is explained. The scaling of features sizes over time and its impact on improving chip performance and reducing costs is also summarized.
Intigrated circuit
The document discusses different types of integrated circuits including their classification, components, advantages, and disadvantages. It describes monolithic ICs which fabricate all components on a single silicon chip. Thick and thin film ICs deposit components on insulating substrates instead of silicon. Hybrid ICs interconnect discrete chips or combine film and monolithic ICs. ICs are also classified as linear or digital, with digital ICs dominating the market and used in computers. Key advantages of ICs are their small size, low cost, high reliability, and performance benefits.
Cmos fabrication by suvayan samanta
This document is an introduction to CMOS VLSI design and fabrication presented as a slideshow. It begins with an overview of VLSI and MOS transistors, explaining how transistors are built on a silicon substrate and doped to create n-type and p-type semiconductors. It then covers p-n junctions, MOSFET structure, and the operation of nMOS and pMOS transistors. The document introduces CMOS logic gates like inverters built from combinations of nMOS and pMOS transistors. It concludes with an overview of the CMOS fabrication process using lithography and various deposition and etching steps.
MicroLED.pptx
MicroLED displays comprise arrays of microscopic LEDs that self-illuminate individual pixels, similar to OLED but using inorganic material. They offer advantages over LCD and OLED like high dynamic range, wide color gamut, and long lifetime. However, manufacturing microLEDs at a small scale remains challenging and expensive for mass production. Key challenges include parallel pick and place of microLED chips, light extraction, and defect management during the manufacturing process. If the challenges can be addressed, microLED has potential applications in devices like smartwatches, VR/AR headsets, automotive displays, and future generation TVs and smartphones.
Real-time Ethernet for Machine Control
View this webinar to learn how to apply industrial networks for real-time machine control.
The webinar will highlight:
• A comparative look at industrial automation networks, assessing speed, performance and precision for machine control applications
• Real-world applications and the benefits that result from using a real-time Ethernet-based solution
• An in-depth examination of how the EtherCAT industrial Ethernet network can be applied to all aspects of production – from design, development and deployment through to production and maintenance on the factory floor
• How Omron uses EtherCAT to integrate HMIs, servos, AC drives, I/O, vision, and PLC-based or stand-alone controllers
Timer based automatic power cutoff for industrial sealing or packaging machines
This document describes a timer based automatic power cutoff system for industrial sealing and packaging machines. The system uses a microcontroller interfaced with a Real Time Clock (RTC) and Light Dependent Resistor (LDR) to automatically turn machines and lights on and off according to predefined times of day. The microcontroller coordinates the individual control modules of an automatic packaging machine, including forming bags, filling material, sealing temperature control, and fault detection.
More Related Content
What's hot
INTEGRATED CIRCUIT
1. Integrated circuits are small chips that can function as amplifiers, oscillators, timers, microprocessors, or computer memory. They are made on silicon wafers that can hold hundreds to millions of transistors, resistors, and capacitors.
2. The manufacturing process involves using computer-designed construction plans and masks to precisely grow silicon crystals, cut wafers, and selectively deposit insulating and conducting layers through repeated photolithography and etching steps.
3. After components are built up layer by layer, metal wires are deposited and patterned to connect the components, forming the working circuits on the chip. Finished chips are tested before packaging and distribution.
3 d integrated circuits
3D integrated circuits stack active electronic components in multiple layers within a single circuit to reduce wasted space and improve interconnectivity between components. This allows both homogenous and heterogeneous chips to be accommodated. The substrate is divided into tiers with similar components stacked together to ease interconnections. Fabrication methods include beam recrystallization, processed wafer bonding, and solid phase crystallization. Routing in 3D considers multiple layers and placement of inter-wafer vias to reduce delays. MAGIC layout editing software provides bonding commands to treat layered designs as single entities. 3D ICs provide significant improvements over conventional 2D designs.
Actuation in mems
This document discusses microelectromechanical systems (MEMS) and electrostatic micro-actuators. It explains that MEMS integrate sensors, actuators and electronics on a silicon substrate using microfabrication technology. Electrostatic micro-actuators consist of thin fingers that are actuated by applying a voltage, generating an attractive electrostatic force due to fringing fields. The document derives equations for the electrostatic energy and force in a parallel plate capacitor model, showing that the force is independent of gap size. It describes the pull-in effect, where the gap decreases until reaching 2/3 of the original spacing, at which point the plates suddenly contact.
3d i cs_full_seminar_report
The document discusses 3D integrated circuits (ICs) as an alternative to increasing chip area in 2D ICs. It provides motivation for 3D ICs by explaining how interconnect delays are becoming the dominant factor limiting performance as technologies scale. Summarizing key points:
1. Interconnect delays are increasing faster than gate delays as technologies scale, limiting performance gains from device scaling alone.
2. 3D chip stacking can help address this by reducing wire lengths and capacitances through short vertical interconnects between layers.
3. 3D ICs also enable heterogeneous integration of different technologies like digital, analog and RF on a single chip through separate layers.
Fpga intro1
This document provides an overview of Field Programmable Gate Arrays (FPGAs). It discusses that FPGAs are programmable logic devices with a 2D array of logic blocks and flip-flops that can be configured by the user. The document outlines the core components of an FPGA including logic blocks, look-up tables, multiplexers, flip-flops, and programmable interconnections. It also describes different FPGA programming technologies such as SRAM, antifuse, EPROM, and EEPROM programming. The document concludes by discussing FPGA advantages such as rapid prototyping and reconfigurability compared to ASICs.
Automatic dipper light control for vehicles
day, also the technology has developed but the safety factor is always
needed to be considered. Now a day’s vehicles come fitted with lots of safety features. One of the essential safety feature that need
to be installed is automatic upper-dipper control of headlight, this feature can mainly use during night time driving. Human eyes
are very sensitive to the light, if eyes suddenly comes in contact with the light after darkness, cornea present in eyes gets contract
i.e. vision gets blank and require some time to recover the vision. Many times the situation comes when suddenly vehicle
approaches from front with headlight in upper mode causes blindness to the eyes of the driver. During that time vehicle covers
some amount of distance, here chances of accident may occur. It is a sheer luck if person goes safely through that situation. To
overcome this manual dipping problem, an automatic mechanism has made to dip the headlight automatically whenever situation
occurs. This can reduce number of accidents during night time and provide comfortable driving. Operating principle, working
and design of PCB is briefly discussed in this paper.
Key Words: Automatic Control, Headlight, Upper, Dipper, etc...
Embedded system seminar
Embedded systems combine both hardware and software to form an integral part of a larger system or machine. They are designed to perform specific tasks, such as controlling an engine or processing signals in real time, without human intervention. Examples include processors in cars, robots, televisions, and consumer electronics. Embedded systems have a long design life cycle that involves acquiring components, testing and certifying the system, planning logistics and repairs, and potentially upgrading the system over time. Many embedded systems now also connect to the internet, allowing consumer products and industrial equipment to access online services. Common application areas of embedded systems include the military, automotive, medical, telecommunications, consumer, and industrial sectors.
Presentation
This document presents a project for an automatic college bell system. It uses a microcontroller and real-time clock to ring the bell according to a pre-programmed schedule, saving manpower costs compared to a manual system. The system consists of an AT89S8252 microcontroller, DS1307 real-time clock, 7805 voltage regulator, step-down transformer, crystal oscillator, relays, resistors, transistors, LEDs, seven segment displays, keypad, and buzzer. It is powered by a 5V supply and can accurately ring the bell according to the college timetable without needing a person to operate it manually.
integrated circuits
First op amps built in 1930’s-1940’s
Technically feedback amplifiers due to only having one useable input
Used in WW-II to help how to strike military targets
Buffers, summers, differentiators, inverters
Took ±300V to ± 100V to power
Rf based home automation
This document describes a student project to create a home automation control system using an RF remote control. It includes a cover page with the project title and student names. It also includes sections on an introduction, circuit diagram, the program used, component descriptions, the scope and uses of the project, and conclusions. The project uses an RF transmitter and receiver, microcontroller, TRIAC, and other components to allow controlling electrical loads like lights and appliances remotely via an RF remote control.
Latest Electrical Mini Projects For EEE Students
Simple Mini Projects For EEE Can Be Implemented By Using Microcontroller And Different Technologies. We Hope That Our Innovative Projects For EEE Students Offer Immense Help And Make Them Select Suitable Projects For Their Project Work.
https://www.elprocus.com
Visit our page to get more ideas on Electrical Mini Projects developed by professionals.
Elprocus provides free verified electronic projects kits around the world with abstracts, circuit diagrams, and free electronic software. We provide guidance manual for Do It Yourself Kits (DIY) with the modules at best price along with free shipping.
Differnce bw bjt & fet
The document compares the applications of bipolar junction transistors (BJTs) and field effect transistors (FETs). BJTs are preferred for low current applications and applications requiring high gain and fast response, while FETs are preferred for low voltage, high frequency, and wide load variation applications. FETs also have advantages of lower power consumption, smaller size, stability at high temperatures, and being easier to fabricate at large scale. Key differences are that BJTs require continuous current to remain on while FETs only require a charged gate, and FETs have extremely high input impedance making them suitable for amplifiers.
3d ic's ppt..
3D packaging stacks separate chips in a single package to save space without integrating the chips. Monolithic 3D ICs build components in layers on a single wafer then dice it, avoiding alignment and bonding issues. Multi-wafer 3D ICs build components on separate wafers, which must be aligned, bonded, and thinned with vertical connections added through silicon vias. 3D ICs promise benefits like reduced cost from improved yield, lower power from shorter wires, and new design possibilities from added connectivity, but challenges include heat dissipation, design complexity, and testing of independent dies.
Easiest Monolithic 3D IC
A Game Changing technology, enabling monolithic 3D IC integration to any fab line without the need for change in the transistor process
Function generator
Function generators are electronic test equipment that generate different types of electrical waveforms over a wide range of frequencies. They produce common waveforms like sine, square, triangular, and sawtooth shapes. More advanced function generators called arbitrary waveform generators can produce any digitally defined waveform. Function generators allow evaluating frequency response of circuits by sweeping frequency between limits.
Microwave Power Transmission
A great concern has been voiced in recent years over the extensive use of energy, the limited supply of resources, and the pollution of the environment from the use of present energy conversion systems. Electrical power accounts for much of the
energy consumed. Much of this power is wasted during transmission from power plant generators to the consumer. The
resistance of the wire used in the electrical grid distribution system causes a loss of 26-30% of the energy generated. This loss implies that our present system of electrical distribution is only 70-74% efficient.
Nikola Tesla is best known for his remarkable statements regarding the wireless transmission of electrical power. His first efforts towards this end started in 1891 and were intended to simply "disturb the electrical equilibrium in the nearby portions of the earth... to bring into operation in any way some instrument." In other words the object of his experiments was simply to produce effects locally and detect them at a distance.
Vlsi
This document discusses VLSI (Very Large Scale Integration) technology and Moore's Law. It covers key topics like transistor scaling, breakthroughs in transistor size and wafer size, challenges in VLSI design, and examples of integrated circuit cost metrics from 1994. Moore's Law, which states that the number of transistors on a chip doubles every 18 months, is explained. The scaling of features sizes over time and its impact on improving chip performance and reducing costs is also summarized.
Intigrated circuit
The document discusses different types of integrated circuits including their classification, components, advantages, and disadvantages. It describes monolithic ICs which fabricate all components on a single silicon chip. Thick and thin film ICs deposit components on insulating substrates instead of silicon. Hybrid ICs interconnect discrete chips or combine film and monolithic ICs. ICs are also classified as linear or digital, with digital ICs dominating the market and used in computers. Key advantages of ICs are their small size, low cost, high reliability, and performance benefits.
Cmos fabrication by suvayan samanta
This document is an introduction to CMOS VLSI design and fabrication presented as a slideshow. It begins with an overview of VLSI and MOS transistors, explaining how transistors are built on a silicon substrate and doped to create n-type and p-type semiconductors. It then covers p-n junctions, MOSFET structure, and the operation of nMOS and pMOS transistors. The document introduces CMOS logic gates like inverters built from combinations of nMOS and pMOS transistors. It concludes with an overview of the CMOS fabrication process using lithography and various deposition and etching steps.
MicroLED.pptx
MicroLED displays comprise arrays of microscopic LEDs that self-illuminate individual pixels, similar to OLED but using inorganic material. They offer advantages over LCD and OLED like high dynamic range, wide color gamut, and long lifetime. However, manufacturing microLEDs at a small scale remains challenging and expensive for mass production. Key challenges include parallel pick and place of microLED chips, light extraction, and defect management during the manufacturing process. If the challenges can be addressed, microLED has potential applications in devices like smartwatches, VR/AR headsets, automotive displays, and future generation TVs and smartphones.
What's hot (20)
Viewers also liked
Real-time Ethernet for Machine Control
View this webinar to learn how to apply industrial networks for real-time machine control.
The webinar will highlight:
• A comparative look at industrial automation networks, assessing speed, performance and precision for machine control applications
• Real-world applications and the benefits that result from using a real-time Ethernet-based solution
• An in-depth examination of how the EtherCAT industrial Ethernet network can be applied to all aspects of production – from design, development and deployment through to production and maintenance on the factory floor
• How Omron uses EtherCAT to integrate HMIs, servos, AC drives, I/O, vision, and PLC-based or stand-alone controllers
Timer based automatic power cutoff for industrial sealing or packaging machines
This document describes a timer based automatic power cutoff system for industrial sealing and packaging machines. The system uses a microcontroller interfaced with a Real Time Clock (RTC) and Light Dependent Resistor (LDR) to automatically turn machines and lights on and off according to predefined times of day. The microcontroller coordinates the individual control modules of an automatic packaging machine, including forming bags, filling material, sealing temperature control, and fault detection.
Industry Automation with Programmable Logic Controller
This presentation discusses industry automation using programmable logic controllers (PLCs). It provides an overview of PLCs, their advantages over traditional control systems, and examples of their use in a textile mill. The presentation covers PLC architecture, programming, and a practical example of a mixer process control problem implemented with a PLC. The presenter aims to share what they learned during an internship about automating industrial processes using PLCs.
Wireless AI based industrial security robot
This document provides an overview of an intelligent robot project that detects dangerous gas/smoke. It includes 9 chapters that describe: the existing system and proposed project (Chapter 1); a literature review (Chapter 2); the overall project description and block diagram (Chapter 3); the software and hardware components including a microcontroller, sensors, camera and other devices (Chapter 4); how the system will be implemented (Chapter 5); the advantages and disadvantages (Chapter 6); potential applications (Chapter 7); and conclusions (Chapter 8). An abstract is also provided.
Real-Time Monitoring and Control System for Industry
Industrial automation and control systems become an integral part of industries and hence the project Real-Time Monitoring and Control System is an important system. Real-Time Monitoring and Controlling System aims to monitor the environmental parameters like Temperature, Humidity, Pressure statistics in any factory and controlling peripheral systems also transmit parameter wireless to the Monitoring room using Zigbee Technology. It uses ARM 7 based embedded technologies from NXP which is sister company of Philips and made for used in highly sensitive and critical Real Time systems.
Wireless ai based intelli industrial security robot 2 ppt
This document describes a wireless industrial security robot project. The robot is designed to detect dangerous events like fires, gas leaks, or high temperatures using sensors. It can provide live video streaming to a remote monitor. The robot uses a microcontroller, motors, sensors and a mechanical arm. It aims to save manpower and improve safety by allowing work in hazardous environments. When issues are detected, it can send alert messages via GSM. The robot is expected to measure environmental data, detect obstacles, and change speed based on sensor readings.
DTMF based load control
This document describes a project to control industrial/agricultural loads wirelessly using cell phones. The receiving phone decodes DTMF tones from the sending phone using a decoder chip. The output is fed to a microcontroller which controls relays and loads. A power supply regulates voltage for the microcontroller and other ICs. Relay driver chips interface the microcontroller to the relays. The project allows remote control of loads from any location using basic cell phones.
Automatic Lubrication Systems & Their Maintenance V1
The document discusses automatic lubrication systems, their types and maintenance. It describes how automatic lubrication systems can precisely apply small amounts of lubricant frequently using pumps, meters and injectors. It outlines common system types like single line resistance systems and multi-line progressive systems. Regular inspection and maintenance is important to ensure systems operate properly given interactions between electrical, mechanical and chemical components. Visual inspection of grease levels, pressures and distribution components is key to fault finding for lubrication issues.
Embedded System Basics
It is a presentation for the Embedded System Basics. It will be very useful for the engineering students who need to know the basics of Embedded System.
Viewers also liked (9)
Timer based automatic power cutoff for industrial sealing or packaging machines
Timer based automatic power cutoff for industrial sealing or packaging machines
Industry Automation with Programmable Logic Controller
Industry Automation with Programmable Logic Controller
Real-Time Monitoring and Control System for Industry
Real-Time Monitoring and Control System for Industry
Wireless ai based intelli industrial security robot 2 ppt
Wireless ai based intelli industrial security robot 2 ppt
Automatic Lubrication Systems & Their Maintenance V1
Automatic Lubrication Systems & Their Maintenance V1
Similar to Embedded real time clock based industrial devices control system
Auto turn off for water pump with four different time slots
This document describes an automatic water pump turn-off system with four different preset time slots. The system uses an Arduino microcontroller connected to four push buttons that select different time durations. A LCD display shows the pump status. A relay controlled by a transistor turns the pump on and off according to the selected time slot. The system provides an easy and low-cost way to automatically turn off a pump after a preset time period.
Journal ishe
This document describes a microcontroller-based sequential starter system that controls the start and stop times of AC motors in real-time. The system uses a PIC18F452 microcontroller interfaced with a DS1307 real-time clock and an LCD. A Windows application developed in C# allows a user to enter start and stop times for motors which are sent to the microcontroller via serial communication. The microcontroller compares the entered times to the real-time clock and executes the motor sequences accordingly, turning motors on and off using solid state relays. The system was designed to demonstrate control of three AC motors based on preset timed sequences.
IRJET- Automatic Bottle Filling and Capping System using PLC
This document summarizes an automatic bottle filling and capping system that uses a Programmable Logic Controller (PLC). The system aims to meet industrial demands by filling and capping bottles on a conveyor belt. The PLC controls the filling process and coordinates the conveyor belt and sensors. After filling, the bottles are capped. Ladder logic is used to program the PLC to control the filling and capping processes. The system is designed to efficiently and accurately fill and cap bottles for use in industries such as those packaging liquids like milk or water.
Gore
This document is a project report submitted by Divyarsh Gore in partial fulfillment of the requirements for a Bachelor of Technology degree in Mechanical Engineering from Mangalayatan University. The report focuses on process flow control using supervisory control and data acquisition (SCADA) systems and programmable logic controllers (PLCs). It includes chapters on automation, PLCs, SCADA systems, a case study of a SCADA-based boiler system, cost analysis, and efficiency improvements. The document provides declarations, certificates, acknowledgments, and contents for the report.
Dr Sohaira-CACIO-V2a_EngineeringTech.pptx
The document summarizes a student project presentation on developing an effective energy management system using programmable logic controllers (PLC) and supervisory control and data acquisition (SCADA). It includes an agenda, timeline, brief summary of the project, working principle, testing and validation process, results, and scope for commercialization. The system aims to monitor and control industrial processes, manage electrical systems through automation, and automatically generate bills while monitoring load parameters. It presents the benefits of PLC and SCADA for process control and energy management in industries.
Training 17
This document provides an overview of a training report on programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems, and automation. It includes sections on the history and introduction of PLCs, the architecture of PLCs including the central processing unit and memory, programming PLCs using ladder logic, applications of PLCs and SCADA systems, the architecture of SCADA systems, and applications of automation in various industries. The training report was submitted to the Electrical Engineering department at the National Institute of Technology in Kurukshetra, India by a student as part of an internship on automation.
TRAINING REPORT ON INDUSTRIAL AUTOMATION- PLC SCADA, VARIABLE FREQUENCY DRIVE
This document provides an overview of a training report on PLC, SCADA, and automation submitted by Akshay Sachan to the Electrical Engineering Department of the National Institute of Technology in Kurukshetra. The report includes an introduction to automation concepts, the history and introduction of programmable logic controllers, the architecture of PLCs including ladder diagrams, programming PLCs using ladder diagrams, applications of PLCs and SCADA systems, SCADA software and architecture, applications of SCADA, variable frequency drives, and a conclusion. Diagrams are provided to illustrate PLC internal architecture, simplified PLC structure, basic PLC sections, and ladder diagrams.
Bottle Filling Application using Arduino
A complete report on developing & various algorithms that are required to develop a working prototype of factory automated bottle filling application
Pc based electrical appliance control system
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Power Saving App Design Report- Group Project
This design report focuses on two major aspects of the Smart City: Smart Environment and Smart Living, using electricity,
one of the most important energy sources in the urban environment, as the connecting link. Our line of inquiry is mock
App development, by some initial design ideas and operational strategies for a new smart App, harnesses urban data to achieve goals such as reducing energy waste, reducing environmental pollution, and promoting smart buildings.
Smart door project report shivnaresh likhar
This document is a major project report submitted by two students, Mahesh Patil and Shivnaresh Likhar, towards fulfilling the requirements for a Bachelor of Engineering degree in Electronics and Communication Engineering. The report describes the development of a "Smart Door" system using embedded systems and microcontrollers. It includes recommendations from professors, a certificate of completion, acknowledgements, an abstract, and table of contents outlining the various chapters which will describe the literature review, analysis, design, implementation, testing and conclusion of the smart door system.
Scada Based Remote Monitoring and Data Acquisition for Energy Management
Nowadays in the power system, conservation of power plays an important role. In this work, it proposed to develop a system for monitoring and accessing the performance of remotely situated devices. For which data acquisition (SCADA) and PLC techniques to monitor and controlling the energy consumption for the entire EEE block SKIT College. The energy consumption details for the same is carried through simulation for the entire block and hardware implementation is carried out for a laboratory and real-time data is traced out. The data so obtained gives clear picture of energy consumption, which can be further used to conserve energy.
Io t internship
The document describes a 5-day internship program organized by the National Power Training Institute (NPTI) on Internet of Things applications in the power and energy sectors. The program will provide both theoretical and hands-on training on topics like IoT architecture, sensors, Arduino and Raspberry Pi programming, cloud computing, and IoT applications for renewable energy, smart metering, and condition monitoring. It will involve lectures, simulations, and projects implementing systems like weather stations and solar monitoring with cloud interfaces. The target audience are college students and engineers, and registration costs Rs. 2,360. The program aims to equip participants with skills for applying IoT in energy management and grid reliability.
training report. automation,plc , scada
This document provides a training report on programmable logic controllers (PLCs), supervisory control and data acquisition (SCADA) systems, and automation. It introduces PLCs and their architecture, programming using ladder logic, applications of PLCs and SCADA systems, and common SCADA software. Examples of automation applications in various industries are also discussed. The report aims to explain the basic concepts and components of PLCs, SCADA, and automation through diagrams and a programming example.
IRJET - IoT based Energy Monitoring and Management System for Smart Home usin...
This document describes an IoT-based energy monitoring and management system for smart homes using renewable energy resources. The system monitors energy consumption using sensors connected to an Arduino board. It displays real-time usage data on an LCD screen and allows remote control of appliances via a web interface. Energy is provided by solar panels and batteries, with the goal of optimizing energy use and costs through automated control based on renewable availability and usage patterns.
GOWTHAM REPORT
This document is a project report submitted by students of Central Polytechnic College for their diploma in electronics and communication engineering. It details the development of a computer vision system to assist visually impaired people. The system uses a camera to detect and identify objects and people, and an audio playback IC to audibly describe the detections to the user. It has a PIC microcontroller at its core, and includes other components like an LCD, power supply, and serial communication chips. The report includes sections on the system design with block diagrams, detailed descriptions of each hardware component, and the software used to program the microcontroller. The aim of the project is to help blind or visually impaired people navigate and identify objects independently without assistance.
Graduation Project Documentation.PDF
This document discusses wireless accessibility for industrial process control and monitoring. It provides an overview of the evolution from wired control systems to current wireless solutions. Specifically, it describes how cable replacement using wireless technologies can eliminate wiring while maintaining functionality. It also discusses different wireless standards such as Wi-Fi, Bluetooth, and ZigBee and their applications in industrial control. Some successful real-world examples of cable replacement are also mentioned.
Energy Conservation through Smart Building and Smart Lighting System
Energy conservation is an extensive topic due to the propagation of electricity demand and challenges globally
and is regarded as one of the most significant issues affects the power system quality, global environment and
consumers. Smart building is a technology that can connect everything to networks or systems to monitor and
control them in various areas such as offices, energy-consuming devices especially in laboratories, security
devices etc. Nevertheless, people's perception about using smart technology for energy saving is still in the mind’s
eye. This means that people discuss about environmental awareness readily. Due to the availability of electricity
and its elemental role, regulating consumers’ behaviours towards power savings can be a challenge. Remarkably,
the gap in today's smart technology design in smart buildings is the compassionate of consumers’ attitudes and
the merging of this perspective into the smart technology. Implementation of PLC based controlling system is a
convenient method to save the power and energy strategy for whole building. Furthermore, prepare a lighting
scheme can results a rapid response in energy conservation. Consequently, PLC Automatic system removes the
human intervention which makes the process smart and energy reduction will gives benefits to the consumers in
terms of reducing the cost of electricity bills. Nonetheless, contemporary buildings’ energy conservation has been
significant solution to cope with the rising electricity necessity.
Speed Synchronization of Multiple Bldcmotors In Textile &Paper Mills Using Mi...
Multiple motor setup has vast application in industries. The application can be in textile mills, paper mills and robotics. In these all application the synchronization is must between the motors to perform certain task. Speed synchronization is very essential in these all operation to avoid damage to the product. The synchronization is done by using microcontroller chip which controls the master slave whose speed is followed by the other motors which all have to be synchronized.
Plc and scada report
The document provides an introduction to Advance Technology in Chandigarh, which offers technical education solutions and products. It then discusses Geeta Institute of Management and Technology in Kurukshetra, which offers various degree programs and has excellent infrastructure for training and student placement. The rest of the document covers topics on industrial automation, including an introduction to programmable logic controllers (PLCs), their history and need, basic PLC architecture, and components like the CPU and I/O interfaces.
Similar to Embedded real time clock based industrial devices control system (20)
Auto turn off for water pump with four different time slots
Auto turn off for water pump with four different time slots
IRJET- Automatic Bottle Filling and Capping System using PLC
IRJET- Automatic Bottle Filling and Capping System using PLC
TRAINING REPORT ON INDUSTRIAL AUTOMATION- PLC SCADA, VARIABLE FREQUENCY DRIVE
TRAINING REPORT ON INDUSTRIAL AUTOMATION- PLC SCADA, VARIABLE FREQUENCY DRIVE
Scada Based Remote Monitoring and Data Acquisition for Energy Management
Scada Based Remote Monitoring and Data Acquisition for Energy Management
IRJET - IoT based Energy Monitoring and Management System for Smart Home usin...
IRJET - IoT based Energy Monitoring and Management System for Smart Home usin...
Energy Conservation through Smart Building and Smart Lighting System
Energy Conservation through Smart Building and Smart Lighting System
Speed Synchronization of Multiple Bldcmotors In Textile &Paper Mills Using Mi...
Speed Synchronization of Multiple Bldcmotors In Textile &Paper Mills Using Mi...
More from Logic Mind Technologies
Running characters led matrix display
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Mobile operated landrover using dtmf decoder
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Lcd based voting machine using 8051 family microcontroller
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Intelligent alcohol detection system for car
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Home automation using dtmf decoder
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Green house monitoring and control
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Embedded based patient heartbeat and temperature monitoring system
This document describes an embedded system for real-time patient monitoring of heartbeat and temperature. The system uses biosensors and a PIC16F877A microcontroller to continuously monitor patients' vital signs. The microcontroller analyzes the sensor data and stores results in a database. It can also trigger an alarm if any abnormal readings are detected. The proposed system aims to offer more powerful and flexible monitoring than current wired solutions, supporting up to 20 patients with low-cost, low-power dual-mode monitoring in real-time. It uses MPLAB C software to implement the processes and discuss results.
Embedded based coin operated water vending machine
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Dtmf controlled bomb detecting robot
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Digital watt meter with current and voltage display
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijayanagar
Breake failure indicator for four wheelers
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijaynagar
Avr based smart electricity meter
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijaynagar
Automatic power cut and dialup in gas leakage detection
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijaynagar
Automatic energy managemet system
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijaynagar
Automatic energy managemet system
ECE Projects for Final Year, Embedded Projects in Bangalore, Engineering Projects in Bangalore, Final Year Projects in Vijayanagar, ECE projects in Vijayanagar, Embedded Project institute in Vijaynagar
A bi directional visitors counter
This document describes a bi-directional visitor counter circuit that uses infrared (IR) sensors to count the number of people entering and exiting a room. The circuit uses two sets of IR sensors with an IR LED and photo transistor at each end to detect movement. When a person passes through the sensor, it interrupts the IR light and the microcontroller detects the signal change and increases or decreases the count. The system displays the in and out counts on an LCD and can help monitor visitor numbers in places like auditoriums, halls, and museums without human intervention at a low cost.
More from Logic Mind Technologies (16)
Lcd based voting machine using 8051 family microcontroller
Lcd based voting machine using 8051 family microcontroller
Embedded based patient heartbeat and temperature monitoring system
Embedded based patient heartbeat and temperature monitoring system
Embedded based coin operated water vending machine
Embedded based coin operated water vending machine
Digital watt meter with current and voltage display
Digital watt meter with current and voltage display
Automatic power cut and dialup in gas leakage detection
Automatic power cut and dialup in gas leakage detection
Recently uploaded
New techniques for characterising damage in rock slopes.pdf
rock mass characterization and New techniques for characterising damage in rock slopes
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Technical Drawings introduction to drawing of prisms
Method of technical Drawing of prisms,and cylinders.
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaRecycled Concrete Aggregate in Construction Part III
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Recently uploaded (20)
New techniques for characterising damage in rock slopes.pdf
New techniques for characterising damage in rock slopes.pdf
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
Technical Drawings introduction to drawing of prisms
Technical Drawings introduction to drawing of prisms
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Recycled Concrete Aggregate in Construction Part III
Recycled Concrete Aggregate in Construction Part III
2. Operations Strategy in a Global Environment.ppt
2. Operations Strategy in a Global Environment.ppt
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Embedded real time clock based industrial devices control system
- 1. Logic Mind Technologies Vijayangar (Near Maruthi Medicals), Bangalore-40 Ph: 8123668124 // 8123668066 Title: Embedded real time clock based Industrial devices control system. ABSTRACT: As this project is based on industrial automation and require power supply. So for this particular application we are using electricity board power can be used for this industrial application. This project gives the best solution for electrical energy wastage. Also the manual operation of the machinery system is completely eliminated. This project developed by using PIC microcontroller with interfacing DS1307 Real Time Clock chip with battery back- up is used, there will be no disturbances for the programmed on/off timings even in power failures. This system switches on the application only at preprogrammed timings.
- 2. PROPOSED SYSTEM: In this project proposed, industrial where operating as heavy machinery devices and those are switched on at their own purpose time. Meantime i.e., from 1:30pm to 2:30am is not required, because the workers flow on the place is almost nil in this time. That means every day around one hours of power is wasted. The Project PIC16F877A Microcontroller Based Energy saver for Commercial operating system with RTC DS1307 Interfacing is an interesting project which uses PIC16F877A microcontroller as its brain. This project is very useful for commercial industrial application, lights for automation lighting system. Control switch set is provided for entering the required timings. 2 X 16 display is provided to display the alarm times and current time. DS1307 is interfaced to the microcontroller for real timing performance. A 3V battery can be connected to DS1307 to avoid time disturbances caused by power failures. PIC16F877A has inbuilt flash EPROM. Data stored remains in the memory even after power failure, as the memory ensures reading of the latest saved settings by the micro controller. It can retain data for more than ten years.
- 3. PROJECT FLOW: First Review: Literature Survey Paper Explanation Design of Project Project Enhancement explanation Second Review: Implementing 40% of Base Paper Third Review Implementing Remaining 60% of Base Paper with Future Enhancement (Modification) For More Details please contact Logic Mind Technologies Vijayangar (Near Maruthi Medicals), Bangalore-40 Ph: 8123668124 // 8123668066 Mail: logicmindtech@gmail.com