The product wheel concept organizes the production of multiple products that share common equipment into a fixed cycle or sequence. This sequence minimizes waste from chemical transitions by grouping products together that require similar changes, allowing easier transitions between products and reducing changeover time and costs. The goal is to maximize higher-volume, lower-cost transitions and minimize lower-volume, higher-cost transitions.
Try this example, Maintenance Planning RACI Chart for assigning roles and responsibilities. You can use this template for any function in your organization.
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/kaizen-event-guide-311
A Kaizen Event is a rapid, focused application of Lean methods to reduce waste so as to improve cost, quality, delivery, speed, flexibility and responsiveness to internal/external customer needs.
This presentation guide provides a step-by-step guidance to the planning, preparation and conducting a Kaizen Event. It includes post-event follow up activites as well as templates for Kaizen charter and presentation to management and other stakeholders.
This event guide can be used together with the Kaizen training presentation.
Number of slides: 98
CONTENTS:
Introduction
- What is Kaizen?
- 10 rules of Kaizen
- What is the purpose of Kaizen?
- Value
- Types of waste
- What is a Kaizen event?
- Benefts of Kaizen and Kaizen events
Quality Process And Procedures Powerpoint Presentation SlideSlideTeam
"You can download this product from SlideTeam.net"
Use quality process and procedures PowerPoint presentation to eliminate the waste and increase the efficiency to meet the customers’ requirements. With the assistance of this quality improvement PPT presentation, you will be able to implement a quality control process, boost the quality of your products and deliver high-quality products to the consumers. This professionally designed quality assurance process presentation PPT makes sure that the organization must reach the optimal quality levels. This content ready quality management PowerPoint presentation covers a template on TQM pyramid, TQM model, customer focus in TQM, planning process, process management, business process improvement, involvement of people, TQM elements, determinants of product quality and service quality, importance of good quality, consequences of poor quality, principles and certification, TQM principles, ISO certificate, quality management tools, and root cause analysis. Use these quality improvement presentation slides to support your organization tasks while distinguishing the problems or challenges impacting your organization capacities effectively. You can highlight the concept of quality improvement, quality management, quality assurance using these quality process and procedures PPT slides. Rough design can kill even the best planned presentation. Our Quality Process And Procedures Powerpoint Presentation Slide will lend your projects world class design. https://bit.ly/3rvaz0Q
Try this example, Maintenance Planning RACI Chart for assigning roles and responsibilities. You can use this template for any function in your organization.
This Slideshare presentation is a partial preview of the full business document. To view and download the full document, please go here:
http://flevy.com/browse/business-document/kaizen-event-guide-311
A Kaizen Event is a rapid, focused application of Lean methods to reduce waste so as to improve cost, quality, delivery, speed, flexibility and responsiveness to internal/external customer needs.
This presentation guide provides a step-by-step guidance to the planning, preparation and conducting a Kaizen Event. It includes post-event follow up activites as well as templates for Kaizen charter and presentation to management and other stakeholders.
This event guide can be used together with the Kaizen training presentation.
Number of slides: 98
CONTENTS:
Introduction
- What is Kaizen?
- 10 rules of Kaizen
- What is the purpose of Kaizen?
- Value
- Types of waste
- What is a Kaizen event?
- Benefts of Kaizen and Kaizen events
Quality Process And Procedures Powerpoint Presentation SlideSlideTeam
"You can download this product from SlideTeam.net"
Use quality process and procedures PowerPoint presentation to eliminate the waste and increase the efficiency to meet the customers’ requirements. With the assistance of this quality improvement PPT presentation, you will be able to implement a quality control process, boost the quality of your products and deliver high-quality products to the consumers. This professionally designed quality assurance process presentation PPT makes sure that the organization must reach the optimal quality levels. This content ready quality management PowerPoint presentation covers a template on TQM pyramid, TQM model, customer focus in TQM, planning process, process management, business process improvement, involvement of people, TQM elements, determinants of product quality and service quality, importance of good quality, consequences of poor quality, principles and certification, TQM principles, ISO certificate, quality management tools, and root cause analysis. Use these quality improvement presentation slides to support your organization tasks while distinguishing the problems or challenges impacting your organization capacities effectively. You can highlight the concept of quality improvement, quality management, quality assurance using these quality process and procedures PPT slides. Rough design can kill even the best planned presentation. Our Quality Process And Procedures Powerpoint Presentation Slide will lend your projects world class design. https://bit.ly/3rvaz0Q
Creating a Continuous Improvement CultureTKMG, Inc.
Recorded webinar: http://slidesha.re/M4Zyhu
Subscribe: http://www.ksmartin.com/subscribe
Karen’s Books: http://ksmartin.com/books
Lean has been in popular use since the late 1990's in some circles and since the mid-2000's in others. Yet very few organizations have establishing true continuous improvement cultures. Why?
In this webinar you will learn the essential elements for infusing C.I. into your organization's DNA--including the must-have leadership and management behaviors--and tips for selling these needs to your leadership team.
Definition of RCM, principles and goals of RCM; Four major components of RCM: reactive maintenance, preventive maintenance, predictive testing and inspection and proactive maintenance; RCM strategies.
Planned Maintenance is a proactive approach to maintenance that focuses on minimizing the downtime and costs associated with machine breakdowns. As one of the key pillars of the TPM Excellence framework, the goal of Planned Maintenance is to have trouble-free equipment that produce defect-free products.
Planned Maintenance achieves and sustains availability of machines at an optimum maintenance cost, reduces spares inventory, and improves reliability and maintainability of machines.
In this presentation developed by our JIPM-certified TPM Instructor, you will learn how to plan and organize the Plan Maintenance activities to strengthen the capabilities of your Maintenance department. It clarifies the roles of the Operations and Maintenance departments in supporting the TPM initiative and provides step-by-step guidance on the implementation of the Planned Maintenance pillar.
LEARNING OBJECTIVES
1. Understand what is Planned Maintenance and why it is important in TPM implementation
2. Acquire knowledge on how to plan and organize Planned Maintenance activities
3. Describe the seven implementation steps of Planned Maintenance
4. Gain knowledge on the JIPM TPM Excellence Criteria for Planned Maintenance
CONTENTS
1. Introduction to Planned Maintenance
2. What is Planned Maintenance?
3. Planning & Organizing for Planned Maintenance
4. The 7 Steps of Planned Maintenance
5. JIPM TPM Excellence Criteria for Planned Maintenance
To download this complete presentation, goto:
https://www.oeconsulting.com.sg/training-presentations
A presentation on TPM and its objectives, goals, benefits, pillars and other aspects have been explored as well as its relation to 5s & visual. In the end, step by step implementation of TPM, losses & OEE, these tools also have been shown & discussed.
[Note: To download this poster, visit:
https://www.oeconsulting.com.sg/training-presentations]
The poster depicts the 8 steps of Focused Improvement (Kobetsu Kaizen).
Creating a Continuous Improvement CultureTKMG, Inc.
Recorded webinar: http://slidesha.re/M4Zyhu
Subscribe: http://www.ksmartin.com/subscribe
Karen’s Books: http://ksmartin.com/books
Lean has been in popular use since the late 1990's in some circles and since the mid-2000's in others. Yet very few organizations have establishing true continuous improvement cultures. Why?
In this webinar you will learn the essential elements for infusing C.I. into your organization's DNA--including the must-have leadership and management behaviors--and tips for selling these needs to your leadership team.
Definition of RCM, principles and goals of RCM; Four major components of RCM: reactive maintenance, preventive maintenance, predictive testing and inspection and proactive maintenance; RCM strategies.
Planned Maintenance is a proactive approach to maintenance that focuses on minimizing the downtime and costs associated with machine breakdowns. As one of the key pillars of the TPM Excellence framework, the goal of Planned Maintenance is to have trouble-free equipment that produce defect-free products.
Planned Maintenance achieves and sustains availability of machines at an optimum maintenance cost, reduces spares inventory, and improves reliability and maintainability of machines.
In this presentation developed by our JIPM-certified TPM Instructor, you will learn how to plan and organize the Plan Maintenance activities to strengthen the capabilities of your Maintenance department. It clarifies the roles of the Operations and Maintenance departments in supporting the TPM initiative and provides step-by-step guidance on the implementation of the Planned Maintenance pillar.
LEARNING OBJECTIVES
1. Understand what is Planned Maintenance and why it is important in TPM implementation
2. Acquire knowledge on how to plan and organize Planned Maintenance activities
3. Describe the seven implementation steps of Planned Maintenance
4. Gain knowledge on the JIPM TPM Excellence Criteria for Planned Maintenance
CONTENTS
1. Introduction to Planned Maintenance
2. What is Planned Maintenance?
3. Planning & Organizing for Planned Maintenance
4. The 7 Steps of Planned Maintenance
5. JIPM TPM Excellence Criteria for Planned Maintenance
To download this complete presentation, goto:
https://www.oeconsulting.com.sg/training-presentations
A presentation on TPM and its objectives, goals, benefits, pillars and other aspects have been explored as well as its relation to 5s & visual. In the end, step by step implementation of TPM, losses & OEE, these tools also have been shown & discussed.
[Note: To download this poster, visit:
https://www.oeconsulting.com.sg/training-presentations]
The poster depicts the 8 steps of Focused Improvement (Kobetsu Kaizen).
USP <665> draft standard : A rational risk-based approach to characterization...Merck Life Sciences
This webinar will cover risk-based characterization of filters and single-use systems used in biopharmaceutical manufacturing according to USP <665>.
Novel innovative biomanufacturing systems such as single-use assemblies often comprise of polymeric materials. There is a lack of standards for characterization of these polymeric systems. USP <665> draft standard is the first standard in development addressing this topic. This chapter recommends risk assessment with respect to patient safety, risk level assignment and risk level appropriate characterization of components.
In this webinar we will discuss:
● Risk assessment to assign a risk level
● Risk level based testing
● Our approach for compliance
● Emprove™ Dossiers for Filters and Single-use systems
USP <665> draft standard : A rational risk-based approach to characterization...MilliporeSigma
This webinar will cover risk-based characterization of filters and single-use systems used in biopharmaceutical manufacturing according to USP <665>.
Novel innovative biomanufacturing systems such as single-use assemblies often comprise of polymeric materials. There is a lack of standards for characterization of these polymeric systems. USP <665> draft standard is the first standard in development addressing this topic. This chapter recommends risk assessment with respect to patient safety, risk level assignment and risk level appropriate characterization of components.
In this webinar we will discuss:
● Risk assessment to assign a risk level
● Risk level based testing
● Our approach for compliance
● Emprove™ Dossiers for Filters and Single-use systems
009 what are the systems validation protocol methods at atl 05 28-2015atlmarketing
If your product must meet the requirements of FDA cGMP, 21 CFR 210, 211, 820, ISO-9000, ISO-13485, or MDD/93/42/EEC (for the CE Mark), there are three very critical elements you must have to be in regulatory compliance. First, you must have a sound and strong Quality Management System (QMS). This is an expression of WHAT you do (your quality policies and structure). Second, you must have reliable Standard Operating Procedures (SOP’s). These are expressions of HOW YOU DO THINGS.
Missing in the above two items is an expression of HOW WELL YOU DO WHAT YOU DO? This is where you must establish your “Systems Validation Protocol” (SVP). Your SVP is an expression of how well your system is working (for example, this can be expressed in overall product conformance percentage or in defects per million for your various products). The SVP is a living and continuous document based on your quality records. The ATL White Paper “What Are The Systems Validation Protocol Methods At ATL?” is our attempt to share with you a sound approach to Systems Validation and the various protocols that you can use.
Similar to E13 1 production planning optimization_final-web (20)
A review of the growth of the Israel Genealogy Research Association Database Collection for the last 12 months. Our collection is now passed the 3 million mark and still growing. See which archives have contributed the most. See the different types of records we have, and which years have had records added. You can also see what we have for the future.
How to Build a Module in Odoo 17 Using the Scaffold MethodCeline George
Odoo provides an option for creating a module by using a single line command. By using this command the user can make a whole structure of a module. It is very easy for a beginner to make a module. There is no need to make each file manually. This slide will show how to create a module using the scaffold method.
Executive Directors Chat Leveraging AI for Diversity, Equity, and InclusionTechSoup
Let’s explore the intersection of technology and equity in the final session of our DEI series. Discover how AI tools, like ChatGPT, can be used to support and enhance your nonprofit's DEI initiatives. Participants will gain insights into practical AI applications and get tips for leveraging technology to advance their DEI goals.
The simplified electron and muon model, Oscillating Spacetime: The Foundation...RitikBhardwaj56
Discover the Simplified Electron and Muon Model: A New Wave-Based Approach to Understanding Particles delves into a groundbreaking theory that presents electrons and muons as rotating soliton waves within oscillating spacetime. Geared towards students, researchers, and science buffs, this book breaks down complex ideas into simple explanations. It covers topics such as electron waves, temporal dynamics, and the implications of this model on particle physics. With clear illustrations and easy-to-follow explanations, readers will gain a new outlook on the universe's fundamental nature.
How to Add Chatter in the odoo 17 ERP ModuleCeline George
In Odoo, the chatter is like a chat tool that helps you work together on records. You can leave notes and track things, making it easier to talk with your team and partners. Inside chatter, all communication history, activity, and changes will be displayed.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
A workshop hosted by the South African Journal of Science aimed at postgraduate students and early career researchers with little or no experience in writing and publishing journal articles.
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
MATATAG CURRICULUM: ASSESSING THE READINESS OF ELEM. PUBLIC SCHOOL TEACHERS I...NelTorrente
In this research, it concludes that while the readiness of teachers in Caloocan City to implement the MATATAG Curriculum is generally positive, targeted efforts in professional development, resource distribution, support networks, and comprehensive preparation can address the existing gaps and ensure successful curriculum implementation.
This presentation was provided by Steph Pollock of The American Psychological Association’s Journals Program, and Damita Snow, of The American Society of Civil Engineers (ASCE), for the initial session of NISO's 2024 Training Series "DEIA in the Scholarly Landscape." Session One: 'Setting Expectations: a DEIA Primer,' was held June 6, 2024.
This slide is special for master students (MIBS & MIFB) in UUM. Also useful for readers who are interested in the topic of contemporary Islamic banking.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
1. TRP 3
Production Planning & Optimization
Toolkit
Innovative Approaches for the Sound Management of
Chemicals and Chemical Waste
2. UNIDO│IAMC Toolkit│Images may not be copied, transmitted or manipulated 2
Introduction
SMEs manufacturing chemical products often have to deal
with fluctuations in overall demand from customers as well as
the type of product. This leads to higher inventory costs,
waste material due to change-overs and loss of productive
capacity due to change-overs.
The reader will learn about typical challenges in production
planning and key features of planning the production of
different chemical products in a fixed facility. The reader will
learn how to optimize production scheduling, sequencing and
levelling of inventory in order to reduce waste and improve
overall plant utilization.
3. 3
Contents
1. Challenges in operations management
Product demand variation
The optimum production sequence
The optimum cycle time
2. Causes of chemical inflexibility
Chemical contamination
Unintended conversions
3. Consequences of chemical inflexibility
4. The product wheel
Introduction
Concept
Applicability
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
4. 4
Topics
Terminology
Operating problems
Operating modes
Categories of chemical transitions
Prerequisites
5. Example: polypropylene fixed sequence
6. Product wheel design and implementation
Components
Process overview
Key steps
7. Key messages
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
5. Challenges in Operations
Management
• Challenges in operations management
• Causes of chemical inflexibility
• Consequences of chemical inflexibility
• The product wheel
• Example: polypropylene fixed sequence
• Product wheel design and implementation
• Key formulas
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 5
6. 6
Challenges in Operations Management (1)
1. Challenge: averaging out product demand variation
Customer demand is not constant
Fluctuations in product flow create waste
Solution: uniform production at a level demand
Example: production fluctuations due to customer demand
variability
350
400
450
500
550
600
650
700
1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20
Demand(Cases)
Weeks
Product demand variability - One SKU
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. Challenges in Operations Management 2. 3. 4. 5. 6.
Source: based on King
7. 7
Challenges in Operations Management (2)
2. Challenge: finding the optimum production sequence
Typical situation: one reactor for many products
However, every transition means:
Loss of product lowered resource efficiency!
Cleaning operations using additional chemicals and producing
(hazardous) waste more pollution!
Reactors not producing near rated capacity (e.g. some as low
as 50% of rated capacity) loss of profitability!
Consistent, repeated production sequence can improve
transitions and minimize changeover difficulties, costs
and time
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. Challenges in Operations Management 2. 3. 4. 5. 6.
8. 8
Challenges in Operations Management (3)
3. Challenge: finding the optimum production cycle time
Short cycles need less inventory and allow more flexibility,
however need more frequent changeovers
Optimum cycle balances inventory and changeover cost
and minimizes total cost
$0
$2 000
$4 000
$6 000
$8 000
$10 000
1 3 5 7 9 11 13 15 17 19
AnnualInventoryCarryingCost
Length of Total Campaign Cycle (Days)
Effect of campaign length on inventory
cost
$0
$2 000
$4 000
$6 000
$8 000
$10 000
1 3 5 7 9 11 13 15 17 19
AnnualChangeoverCost
Length of Total Campaign Cycle (Days)
Effect of campaign length on total
changeover cost
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. Challenges in Operations Management 2. 3. 4. 5. 6.
Source: based on King
9. 9
Learning Objectives
Can you explain the three challenges in operations
management?
1. Challenge: averaging out product demand variation
Finding a compromise between the variation of customer
demand and stable production
2. Challenge: finding the optimum production sequence
Consistent, repeated production sequence to improve
transitions and minimize changeover difficulties and costs
3. Challenge: finding the optimum production cycle time
Optimum cycle balances inventory and changeover cost and
minimizes total cost
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. Challenges in Operations Management 2. 3. 4. 5. 6.
10. 10
Learning Objectives
Can you explain why chemical transitions need to be
optimized?
Every transition implies lowered resource efficiency,
increase in pollution and loss of profitability
Optimisation can increase available capacity and allow
faster and more frequent production of the product
portfolio
Can you name any examples from your own experience?
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. Challenges in Operations Management 2. 3. 4. 5. 6.
11. Causes of Chemical
Inflexibility
• Challenges in operations management
• Causes of chemical inflexibility
• Consequences of chemical inflexibility
• The product wheel
• Example: polypropylene fixed sequence
• Product wheel design and implementation
• Key formulas
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 11
12. 12
Causes of Chemical Inflexibility (1)
In general, chemical inflexibility results from two causes:
1. Chemical
contamination
i.e. unintentional
mixture of products and
other substances
2. Unintended
chemical
conversions
i.e. conversion of raw
material into something
other than intended
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. Causes of Chemical Inflexibility 3. 4. 5. 6.
13. 13
Causes of Chemical Inflexibility (2)
Chemical contamination can occur in two different ways:
1. Product of one type remains in the reaction vessel and
mixes with the next product in vessel
2. Materials, such as additives or modifiers used in a
reaction to differentiate resulting product, remain in
equipment during product changes and contaminate the
next product
In both cases, situation needs to be resolved to allow
perfect production of new material
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. Causes of Chemical Inflexibility 3. 4. 5. 6.
14. 14
Causes of Chemical Inflexibility (3)
Unintended conversions: conversion of raw material into
output that is not the intended product (although
unintended, not unexpected)
In continuous operations, it often results from a transition in
operating conditions or transition to products
Example of a chemical transition:
Typical to produce polyethylene with propylene as co-
monomer.
One customer wants 3% co-monomer, another wants 5%
co-monomer. Produced in same reactor with continuous flow.
The transition produces 4% - which is waste product in this
case.
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. Causes of Chemical Inflexibility 3. 4. 5. 6.
15. Consequences of Chemical
Inflexibility
• Challenges in operations management
• Causes of chemical inflexibility
• Consequences of chemical inflexibility
• The product wheel
• Example: polypropylene fixed sequence
• Product wheel design and implementation
• Key formulas
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 15
16. 16
Consequences of Chemical Inflexibility (1)
Chemical inflexibility associated with product
changeovers may lead to:
Waste material:
Material lost on restart while ramping process conditions up to
specified temperature, pressure, speed, torque, etc.
Material losses after restart, while bringing product properties
within specification
Process ingredients from the old product lost in flushing out
Loss of productive capacity:
If the line is running at capacity, time lost during changeover
represent revenue loss
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. Consequences of Chemical Inflexibility 4. 5. 6. 7.1. 2. 3. Consequences of Chemical Inflexibility 4. 5. 6.
17. 17
Consequences of Chemical Inflexibility (2)
Additional costs:
Cleaning solvents
Parts consumed in the changeover: filters, O-rings, screens,
gaskets, etc.
Lab time and cost to ensure all contaminants are gone
Lab time and cost to ensure all product properties are within
specifications
Moreover, supposed amortization of these losses through
long production runs creates waste of inventory and reduces
responsiveness and flexibility
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. Consequences of Chemical Inflexibility 4. 5. 6. 7.1. 2. 3. Consequences of Chemical Inflexibility 4. 5. 6.
18. 18
Learning Objectives
Can you explain causes and results of chemical
inflexibility?
Causes:
chemical contamination
unintended conversions
Results:
waste material
additional costs
loss of productive capacity
Moreover, long production runs intended to offset these costs
create waste of inventory
Can you think of any examples from your own business?
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. Consequences of Chemical Inflexibility 4. 5. 6.
19. The Product Wheel
• Challenges in operations management
• Causes of chemical inflexibility
• Consequences of chemical inflexibility
• The product wheel
• Example: polypropylene fixed sequence
• Product wheel design and implementation
• Key formulas
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 19
20. 20
The Product Wheel (1)
What is a product wheel?
Management technique to minimize waste resulting from
chemical transitions by production planning and
scheduling (optimization)
How does it work?
Organizes a fixed production cycle that sequences one
product after another in a way that:
maximizes the number of transitions that have low cost and
minimizes the number of transitions that have high
cost
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
21. 21
The Product Wheel (2)
Product wheel concept:
Organisation of several products
that share common equipment
in a repeating production cycle
so that each transition requires
the smallest possible change
Sometimes
A product might be incorporated more than once in a cycle
A suboptimum transition is acceptable
A
CE
A
B
C
D
E
F
G
H
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
A DB C GF HE
Time
Cycle time
Production schedule
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
Source: based on King
22. 22
The Product Wheel (3)
Product
wheels
apply…
…to entire product lines or single
elements of process equipment
…to any elements with changeover costs
depending on the production sequence
…as part of a comprehensive, well
elaborated Lean plan
Product wheel applicability:
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
23. Sales
Changeover
Batches
Spoke Campaign
23
The Product Wheel (4)
Product wheel terminology: Cycle time/wheel time:
time needed for one cycle
Spoke/campaign:
portion of the wheel
allocated to one product
Changeover/product transition:
area between spokes, needed for
setup
Cycle: one complete
run through the entire
wheel
Pit time/process
improvement time: time
providing opportunity for
continuous improvement
Batch: one lot or
unit of a product
being made
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.
Source: based on King
Wheel Time
Product A
Product F
One Cycle,
One Revolution
Pit Time
F
G
H
A
C
DE
1. 2. 3. 4. The Product Wheel 5. 6.
24. Operating modes within the product wheel:
Four possible manufacturing strategies:
Frequency of 1: product is made on
every cycle (high-volume product)
Frequency of 2, 3, or 4: made on
alternate cycles (medium volume)
Production in case inventory of a product falls below a
certain trigger level (low volume)
Products are made to order, i.e. only in response to a
specific order (very low to unpredictable demand)
24
The Product Wheel (5)
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.
Source: based on King
Sales
Pit Time
F
G
H
A
C
DE
1. 2. 3. 4. The Product Wheel 5. 6.
25. 25
The Product Wheel (6)
Three categories of chemical transitions determine fixed
product sequence and respective changeover time:
1. Changes in process conditions
• e.g. adjusting changes in T, p, or residence time unintended
conversion
2. Additives and modifiers
• magnitude of transition losses depends on quantity and compatibility
of additives and modifiers
3. Changes in reactive chemicals
• product-to-product changes with fundamental change in chemistry,
e.g. changes in co-monomers or catalysts
• losses also depend on material compatibility
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
26. 26
The Product Wheel (7)
Prerequisites for product wheels:
Most of all, product wheels require a stable production process
with predictable performance.
Recommended foundational elements:
Highly motivated, well-trained workforce
• Well-trained operators with value for standard work and some understanding
of Lean
Standard work
• Standardized and documented work and processes
Visual management
• Real-time, interactive display boards as management instrument
Total productive maintenance (TMP)
• Improving manufacturing performance by improving the way equipment is
maintained
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
27. 27
The Product Wheel (8)
Elements which facilitate the implementation and improve the
performance of a product wheel
A value stream map
• Well-constructed value stream map to visualize process flow and scheduling issues
Single-minute exchange of dies (SMED)
• Resulting in shorter and less expensive changeovers
Stock keeping unit (SKU) rationalisation – portfolio management
• Ongoing analysis of the product portfolio in order to sort out obsolete products
Bottleneck identification and management
• Smooth continuous flow with little interruptions
Cellular manufacturing and group technology
• Grouping products into families and dedicating them to specific equipment
Quality control
• Six Sigma and statistical process control (SPC)
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
28. 28
Learning Objectives
Can you describe the product wheel concept?
Organisation of several products that share common
equipment in an optimized, fixed cycle
Maximizes the number of transitions that have low cost
and minimizes the number of transitions that have high
cost
When is it suitable for application?
For entire product lines or elements of process equipment
For elements with changeover costs depending on the
production sequence
As part of a Lean plan
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
29. 29
Learning Objectives
How can it be explained that a fixed cycle does not
reduce your capability to respond to market needs (in
comparison to random sequencing)?
Each cycle reduces capacity lost during transition and
capacity consumed to make inventory
Therefore, the effectively available capacity increases
As a consequence, the entire product portfolio can be
produced faster and more frequently
Fixed cycles respond to customer demand from production
rather than from inventory
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
30. 30
Learning Objectives
Which three categories of chemical transitions have to
be taken into account when defining a fixed cycle?
Changes in process conditions
Changes in reactive chemicals
Additives and modifiers
Can you think of any examples which might be of
importance in your business?
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6. 7.1. 2. 3. 4. The Product Wheel 5. 6.
31. 31
Learning Objectives
Can you list some of the foundational elements which
should be in place before product wheel design?
Quality control
Standard work
A value stream map
Visual management
Total productive maintenance
Single-minute exchange of dies
Portfolio management
Bottleneck identification and management
Highly motivated, well-trained workforce
Cellular manufacturing and group technology
?
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. The Product Wheel 5. 6.
32. Example: Polypropylene
Production in a Fixed Sequence
• Challenges in operations management
• Causes of chemical inflexibility
• Consequences of chemical inflexibility
• The product wheel
• Example: polypropylene fixed sequence
• Product wheel design and implementation
• Key formulas
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 32
33. UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 33
Example: Introduction
We use a polypropylene (PP) production process from a real
plant for our example
PP is a typical commodity plastic and has been widely used in
many application fields, due to its excellent properties such as:
stiffness
heat resistance
process ability
Different grades of PP possessing different properties are
produced depending on type of catalyst used, operating conditions
and additives.
The following example shows how to develop an optimum
sequence for PP production to minimize waste time and
materials while maximizing plant utilization and profit margins
light weight material density
relatively low price
1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6. 7.1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6.
34. 34
Example: Polypropylene Fixed Sequence (1)
Step 1: Determine the most important parameters (using
design of experiments) affecting transition losses.
1.Changes in reactive chemicals: catalyst used to initiate
reaction (three different catalysts used) highest cost
transition
2.Changes in process conditions: melt flow index (MFI)
which is an indirect measure polymer molecular weight (MW)
and is typically a customer specification. Involves changes in
operating conditions (p, T, residence time) medium cost
transition
3.Additives and modifiers: Incorporation of chemical modifier
or additive into product typically lower cost transition
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6. 7.1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6.
35. 35
Example: Polypropylene Fixed Sequence (2)
Step 2: Depending on these parameters, visualize the
production cycle as nested levels:
Level 1: Each product cycle had three big campaigns, one for
each catalyst
Level 2: Within each catalyst campaign, cycled through
phases of additives and modifiers according to mutual
compatibility
Level 3: Within each phase of additives, product ranges were
produced within a range of MFI value (high to low or low
to high) by changing reactor conditions
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6. 7.1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6.
36. 36
Example: Polypropylene Fixed Sequence (3)
Simplified product wheel:
Within each
campaign of
catalysts, several
waves of
additives and
modifiers
Within each
additive wave,
multiple products
with increasing or
decreasing MFI
values
Three
campaigns
of catalysts
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6. 7.1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6.
Source: based on Floyd
37. 37
Example: Polypropylene Fixed Sequence (4)
Achieved benefits (various case studies):
Reduction of transition losses by 90%
Increased reactor utilization from 50% to >85%
Increase in plant capacity and capability
Increased profit margins
Fixed sequence production is one of the most
important management practices to improve a
plant’s resource efficiency and profitability
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. Example: Polypropylene Fixed Sequence 6.
38. Product Wheel Design and
Implementation
• Challenges in operations management
• Causes of chemical inflexibility
• Consequences of chemical inflexibility
• The product wheel
• Example: polypropylene fixed sequence
• Product wheel design and implementation
• Key formulas
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 38
39. 39
The Four Product Wheel Components
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
Fixed sequence:
maximize low cost transitions
and minimize high costs
transitions minimal cost for
total portfolio
Inventory policy:
provides enough material to
meet customer demands
throughout product cycle
without causing interruptions
Variable volume scheduling:
products are produced in
different volumes in a fixed
sequence increase in
operational stability and
flexibility in production
Continuous improvement:
lower waste (time, material,
cost) due to transitions and
concentration on improving
transition efficiency
Product wheel
components
40. 40
Design and Implementation Process (1)
Process overview (17 steps):
Step 1: Begin with
an up-to-date,
reasonably accurate
value stream map
(VSM)
Step 2: Decide
where to use
wheels to schedule
production
Step 3: Analyse
product demand
volume & variability
- identify candidates
for make to order
Step 4: Determine
the optimum
sequence
Step 5: Analyse the
factors influencing
overall wheel time
Step 6: Determine
overall wheel time
and wheel
frequency for each
product
Step 7: Distribute
products across
wheel cycles –
balance the wheel
Step 8: Plot the
wheel cycles
Step 9: Calculate
inventory
requirements
Design Implementation
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
41. 41
Design and Implementation Process (2)
Process overview:
Step 10: Review
with stakeholders
Step 11:
Determine who
“owns” (allocates)
the PIT time
Step 12: Revise
the scheduling
process
Step 13: Develop
an implementation
plan
Step 14: Develop
a contingency plan
Step 15: Get all
inventories in
balance
Step 16: Put an
auditing plan in
place
Step 17: Put a
plan into place to
rebalance the
wheel periodically
Design Implementation
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
42. Design and Implementation Process (3)
Where are product wheels appropriate and beneficial?
Entire product line or individual piece of equipment?
Use value stream map
What are volume and variability of demand for each
product processed in this line or equipment?
Which products shall be made to store, which to
order?
How does the product flow through the process, how is it
transformed?
What are throughput, performance, product line-up etc.?
Visualize the entire manufacturing process
Step 3: Analyse product
demand volume and
variability – identify
candidates for make to
order
Step 2: Decide where to
use wheels to schedule
production
Step 1: Begin with an
up-to-date, reasonably
accurate value stream
map (VSM)
42UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
43. Design and Implementation Process (4)
What is the fastest wheel time practically possible?
What is the most economical wheel time possible?
Are there any product shelf life limits (e.g. for food products)?
Is there strong product demand variability?
What is the minimum lot size?
What is the optimum overall wheel time?
Which frequency is suitable for each of the lower-volume
products?
Use findings of step 5 to define the best solutions
Step 6: Determine
overall wheel time and
wheel frequency for
each product
Step 5: Analyse the
factors influencing
overall wheel time
Step 4: Determine the
optimum sequence
Which parameter changes are necessary for product transitions?
Which changeover times and losses are they associated with?
Which product sequence minimises them?
43UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
44. Design and Implementation Process (5)
How can the wheel cycles be visualised in the form of charts
or diagrams?
Gives a feel for structure and operation of the wheel,
especially to those not involved in the design process
How much inventory is necessary to support the wheel?
Has the correct balance between inventory and changeover
frequency been found?
Are any modifications necessary?
Ideally, this step is a confirmation of the approximations
made in step 5
Step 9: Calculate
inventory requirements
Step 8: Plot the wheel
cycles
Step 7: Distribute
products across the
wheel cycles – balance
the wheel
On which cycles shall products with a frequency greater than
one be made?
How can this be realized with the total planned production
being relatively balanced from cycle to cycle?
44UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
45. Design and Implementation Process (6)
Which specific person or team is responsible for the
allocation of PIT time to different activities?
How can wheel design, schedule, and operating parameters
be incorporated into the enterprise resource planning system
(ERP)?
Step 12: Revise the
scheduling process
Step 11: Determine who
“owns” (allocates) the
PIT time
Step 10: Review with
stakeholders
Does everybody involved in product scheduling understand
the consequences for their work?
Includes people in production, maintenance, accounting,
warehousing, marketing, etc.
45UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
46. Design and Implementation Process (7)
What could go wrong?
How can it be recognized and remedied?
If the wheel has to be broken, how can it be resumed
quickly?
Plan in advance for the case of a crisis
Do inventories cover all needs before starting the wheel?
Avoid stock-outs by increasing inventories which are too lowStep 15: Get all
inventories in balance
Step 14: Develop a
contingency plan
Step 13: Develop an
implementation plan
How is the design going to be implemented?
Plan, schedule and staff tasks necessary for implementation
46UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
47. Design and Implementation Process (8)
Does the wheel need to be rebalanced?
Have major changes occurred which affected wheel
performance?
Plan to regularly re-examine the wheel, being proactive
rather than reactive
Step 17: Put a plan into
place to rebalance the
wheel periodically
Step 16: Put an auditing
plan in place
Is the wheel operating as intended?
Monitor performance on a regular, standardized basis
Collect and analyse wheel-braking events, customer service
performance, stock-out frequency, or other parameters
47UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
48. 48
Key Steps – Step 1 (1)
Step 1: Begin with an up-to-date, reasonably accurate VSM
Within all VSM parameters, the following are of most interest
for product wheel design:
C/O (changeover) time: The longer the changeover time, the
stronger a candidate for product wheel introduction
C/O (changeover) loss: Changeover losses are even more
important than changeover times
Number of SKUs (stock keeping units): The more product
types, the more changeovers associated with time and loss
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
49. 49
Key Steps – Step 1 (2)
Within all VSM parameters, the following are of most interest
for product wheel design:
Takt and effective capacity: They are necessary to
calculate the overall wheel time (both the shortest and the
most economic one)
EPEI (Every part every interval): EPEI can be improved
significantly by the introduction of product wheels
Utilization/Utilize: Low utilization (e.g. 70% or less)
indicates potential for much shorter wheels, as time for
more changeovers is left
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
50. 50
Key Steps – Step 2
Step 2: Decide where to use wheels to schedule production
Analyse VSM on the basis of the following criteria:
Number of SKUs or product types
Changeover times and losses
Every part every interval (EPEI)
Steps with a large inventory following that step
Secondary criteria:
High yield losses
Low uptime/Overall equipment effectiveness (OEE)
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
51. 51
Key Steps – Step 3
Step 3: Analyse products for a make-to-order strategy
Products of small volumes with no predictable pattern in
demand should only be made to satisfy specific orders.
Therefore, analyse for each product
a) Demand volume
b) Demand variability
And elaborate a
a) Decision matrix
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.
Source: based on King
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
52. 52
Key Steps – Step 3
Decision matrix to elaborate a production strategy for
each product:
A
B
C
DE
F
G
H
I
J
[CELLREF]
L
M
N
0
0,1
0,2
0,3
0,4
0,5
0,6
0,7
0,8
0 20 40 60 80 100 120 140
CoefficientofVariation
Weekly demand - Rolls
Quadrant 3:
make to order
Quadrant 4:
MTS or MTO
Quadrant 2:
MTS or MTO
Quadrant 1:
make to stock
c)
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.
Source: based on King
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
53. 53
Key Steps – Step 4
Step 4: Determine the optimum sequence
Decide on whether to optimize changeover times or losses
Visual techniques such as spreadsheets listing products
and changeover times or from/to matrices can be helpful
In more complex cases,
mathematical calculations
help finding the optimum
solution
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
To
A B C
From
A 20 42
B 15 30
C 45 40
A
B
C
A
A
B
B
C
C
C
B
C
A
A
B
B
C
A
C
B
A
20
42
15
30
45
40
30
40
42
45
20
15
45
15
40
20
30
42
=95
=97
=97
=95
=95
=97
Source: based on King
54. 54
Key Steps – Step 5
Step 5: Analyse the factors influencing overall wheel time
Take into account at least the following criteria:
Time available for changeovers – The shortest wheel possible
Economic order quantity (EOQ) – The most economic wheel
Short-term demand variability
Minimal practical lot size
Shelf life
Out of all the different answers, find the optimum decision
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
55. 55
Key Steps – Step 5
Shortest wheel possible – the lower limit to cycle time
Total available time − Total production time = Time available for changeovers
Wheel cycles per period =
Time available for changeovers
Sum of changeover times
Wheel time =
Total available time
Wheel cycles per period
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
56. 56
Key Steps – Step 5
Economic order quantity (EOQ) – balancing out
inventory costs and changeover costs
EOQ =
2 × 𝐶𝑂𝐶 × 𝐷
𝑉 × 𝑟 × (1 −
𝐷
𝑅
)
EOQ: economic order quantity
COC: changeover cost
D: demand per period
V: unit cost of the material
r: percent carrying cost of
inventory per period
PR: production rate
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
57. Example: forming machine 3, product G
57
Key Steps – Step 5
A wheel time
slightly longer or
shorter than the
optimum will nearly be
as good!
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.
Source: based on King
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
Wheel time-days
Changeover cost
Inventory cost
Total cost
$150000
$130000
$100000
$80000
$50000
8 10 12 14 16 18 20
58. 58
Key Steps – Step 5
Practical lot sizes of each material
Minimum lot sizes below which production is not
reasonable
EOQ analyses recommend impractically short cycles for:
Very expensive materials
Inexpensive changeovers
In these cases, minimum lot sizes outweigh
EOQ calculations
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
59. 59
Key Steps – Step 5
Shelf life
Shelf life specifications may limit wheel time, e.g. in the food
industry:
Product varieties,
e.g. allergen-free
versions require
extensive cleaning
High
changeover costs
Shelf life
requirements by
customers,
distributors and
retailers
Little time left for
production
Longwheeltime
Shortwheeltime
Find a balance
between shelf life
limitations and
changeover
effects
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
60. 60
Key Steps – Step 6
Step 6: Put it all together – determine overall wheel time and
wheel frequency for each product
Overall wheel time generally depends on:
EOQ of high-volume products
Shortest wheel cycle time possible
Shelf life constraints
The frequency for a specific product will depend on:
EOQ
Minimum lot size, if applicable
Short-term variability, if applicable
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
61. 61
Key Steps – Step 8
Step 8: Plotting the wheel cycles
A visual representation of the elaborated cycle supports:
Communication of the concept, its features and
consequences
Understanding of the schedule to be followed
Discussions and questions
A
B
C
DE
F
G
PIT
Wed
A
Thu
B
Fri
C
Sat
D
Sun
E
Mon
F
Tue
G
Wed
PIT Time A
Cycle 1 Cycle 2
Cycle 1 UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation 7.1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
Source: based on King
62. 62
Key Steps – Step 9
Step 9: Calculate inventory requirements
Some inventory is needed to support a product wheel.
Inventory for each product will consist of two components:
a) Cycle stock: average demand per unit time x wheel time
x cycle frequency
b) Safety stock: Z x σ
Z: Factor representing the customer service level goal
σ: Standard derivation expressing demand variability
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
63. 63
Key Steps – Step 9
Examples of required inventory:
Inventory needed
increases with longer
wheel time
If the demand was always
the average, no safety stock
would be needed
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
1. 2. 3. 4. 5. 6. Product Wheel Design and Implementation
Wheel Time
Cycle 1
Wheel Time
Cycle 2
Wheel Time
Cycle 3
Inventory
Safety
StockCycleStock
P1
D1
P2 P3
P4
D2 D3
P = Production to begin a wheel cycle
D = Demand during the wheel cycle
Source: based on King
1 Week1 Week1 Week
Inventory
1000#
2000#
D1 D2 D3
D1+ D2
a)
b)
Source: based on King
65. UNIDO│IAMC Toolkit│Images may not be copied, transmitted or manipulated 65
Key Messages (1)
SMEs manufacturing chemical products often have to deal with
fluctuations in overall demand from customers as well as the type of
product. This leads to higher inventory costs, waste material due to
change-overs and loss of productive capacity due to change-overs.
Causes of chemical inflexibility include chemical contamination and
unintended chemical conversions.
Consequences of waste include waste material, loss of productive
capacity, extra costs related to cleaning and changeover activities
The product wheel is a management technique to minimize waste
resulting from chemical transitions by production planning and scheduling
(optimization). It organizes a fixed production cycle that sequences one
product after another in a way that:
maximizes the number of transitions that have low cost and
minimizes the number of transitions that have high cost
66. UNIDO│IAMC Toolkit│Images may not be copied, transmitted or manipulated 66
Key Messages (2)
Fixed sequence:
maximize low cost transitions
and minimize high costs
transitions minimal cost for
total portfolio
Inventory policy:
provides enough material to
meet customer demands
throughout product cycle
without causing interruptions
Variable volume scheduling:
products are produced in
different volumes in a fixed
sequence increase in
operational stability and
flexibility in production
Continuous improvement:
lower waste (time, material,
cost) due to transitions and
concentration on improving
transition efficiency
Product wheel
components
67. UNIDO│IAMC Toolkit│Images may not be copied, transmitted or manipulated 67
Key Messages (3)
The design and implementation of a product wheel consists
of the following key steps:
Use a basic value stream map and decide where to use
product wheels to schedule production
Analyse product demand volume & variability and
determine the optimum sequence
Determine overall wheel time and wheel frequency for
each product and balance the wheel by distributing
products across wheel cycles
Calculate inventory requirements
Review with stakeholders and agree on who ‘owns’ the
changeover process (i.e. pit time).
Develop and execute the implementation plan
68. Sources
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated 68
69. Fusce posuere, magna sed pulvinar ultricies,
purus lectus malesuada libero, sit amet magna
eros quis (ARIAL 32).
Sources
CSD Engineers, Switzerland / ISSPPRO, Germany, 2015
King, P. L.: Lean for the Process Industries: Dealing with
Complexity, 2009
King, P. L.; King, J. S.: The Product Wheel Handbook:
Creating Balanced Flow in High-Mix Process Operations,
2013
Floyd, R.: Liquid Lean: Developing Lean Culture in the
Process Industries, 2010.
69UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated
70. Fusce posuere, magna sed pulvinar ultricies,
purus lectus malesuada libero, sit amet magna
eros quis (ARIAL 32).
Images
ISSPPRO GmbH, Germany, 2015
Shutterstock
UNIDO│IAMC Toolkit│Images may not be copied, transmitted or manipulated 70
71. 71
This presentation was elaborated with the
requested diligence and with the generally
accepted principles of the relevant field.
If a third party uses the contents of the
presentation in order to take decisions, the
authors disclaim any liability for any kind of
direct or indirect (consequential) damages.
Disclaimer
UNIDO | IAMC Toolkit | Images may not be copied, transmitted or manipulated