1. The document proposes an optical power infrastructure in Earth-moon space using lasers powered by concentrated sunlight to distribute power virtually anywhere and anytime.
2. It identifies four technical advances needed: concentrating sunlight to saturate a laser gain medium, removing heat without distortion, exciting the lowest order laser mode, and converting laser light to electricity efficiently.
3. Experiments are proposed to demonstrate key mechanisms at small scale, with the goal of maturing the technologies to eventually enable large-scale distribution of optical power throughout the Earth-moon system.
One of the major hurdles holding solar power back is the inherent intermittency issues that come with having an atmosphere over your head. Solar cells on the Earth's surface can only generate electricity when the sun is in the sky, and for many countries, especially those in the Northern hemisphere, constant cloud cover can put a damper on a solar economy. But what if you could bypass the atmosphere altogether, what if you could harness solar energy directly from the sun, in space.
Space-based solar power is the concept of collecting solar power in space for use on Earth. It has been in research since the early 1970s.
SBSP would differ from current solar collection methods in that the means used to collect energy would reside on an orbiting satellite instead of on Earth's surface.
Process:
A means of collecting solar power in space.
A means of transmitting power to earth.
A means of receiving power on earth.
Here is the 2nd project of mine, given by college students. get information from this. want to create like this contact me @instagram slide+ presentation
A presentation on upcoming Solar Power Technologies as a viable means of efficiently harnessing solar energy. Part of Self Study Phase-2 at RV College of Engineering, Bangalore.
Part 1 is here: http://www.slideshare.net/Jayanth-R/solar-power-satellites
One of the major hurdles holding solar power back is the inherent intermittency issues that come with having an atmosphere over your head. Solar cells on the Earth's surface can only generate electricity when the sun is in the sky, and for many countries, especially those in the Northern hemisphere, constant cloud cover can put a damper on a solar economy. But what if you could bypass the atmosphere altogether, what if you could harness solar energy directly from the sun, in space.
Space-based solar power is the concept of collecting solar power in space for use on Earth. It has been in research since the early 1970s.
SBSP would differ from current solar collection methods in that the means used to collect energy would reside on an orbiting satellite instead of on Earth's surface.
Process:
A means of collecting solar power in space.
A means of transmitting power to earth.
A means of receiving power on earth.
Here is the 2nd project of mine, given by college students. get information from this. want to create like this contact me @instagram slide+ presentation
A presentation on upcoming Solar Power Technologies as a viable means of efficiently harnessing solar energy. Part of Self Study Phase-2 at RV College of Engineering, Bangalore.
Part 1 is here: http://www.slideshare.net/Jayanth-R/solar-power-satellites
This paper is all about how to install solar power stations in space and collecting solar energy with an efficiency of 95% (as proven). And then by using either microwaves or LASER, sending that energy to the power grids on earth and converting it into electricity.
Why Space Solar Power Needs the Satellite Industryrobertbell
Engineers and visionaries have been pursuing space-based solar power (SSP) generation for decades. Robert Bell, executive director of the Society of Satellite Professionals In'tl, explains why the satellite industry is SSP's best potential partner as well as an industry already operating in GEO with issues and concerns it needs taken into account.
Wireless power transmission via Space Based Solar Powernikhil gaurav
this presentation tells about how the power is transmitting wireless and how it helps to decrease the losses in power transmission and thus increases efficiency and more important is uses a renewable source of energy(SUN).
A Presentation on Space Based Solar Power and the Different models proposed by some countries. Technological aspect and the future of Energy in the Global Scenario. Renewable Energy
Introduction to Satellite Power Station, Need for SPS, Basic Components of SPS and their description, Challenges, Present Status and future expectation.
This paper is all about how to install solar power stations in space and collecting solar energy with an efficiency of 95% (as proven). And then by using either microwaves or LASER, sending that energy to the power grids on earth and converting it into electricity.
Why Space Solar Power Needs the Satellite Industryrobertbell
Engineers and visionaries have been pursuing space-based solar power (SSP) generation for decades. Robert Bell, executive director of the Society of Satellite Professionals In'tl, explains why the satellite industry is SSP's best potential partner as well as an industry already operating in GEO with issues and concerns it needs taken into account.
Wireless power transmission via Space Based Solar Powernikhil gaurav
this presentation tells about how the power is transmitting wireless and how it helps to decrease the losses in power transmission and thus increases efficiency and more important is uses a renewable source of energy(SUN).
A Presentation on Space Based Solar Power and the Different models proposed by some countries. Technological aspect and the future of Energy in the Global Scenario. Renewable Energy
Introduction to Satellite Power Station, Need for SPS, Basic Components of SPS and their description, Challenges, Present Status and future expectation.
Principles, Classification and Selection of Solar DryersiMentor Education
A comprehensive review of the fundamental principles governing the drying process with classification of the practically realized various designs and selection of solar
dryers for drying of agricultural and marine products has been presented. The classification clearly illustrates that the solar dryer designs can be grouped systematically according to their operating temperature ranges, heating
sources/modes and operational modes. It is difficult to have one single criteria for the selection of a solar dryer for a specific region or a product as solar insolation and other parameters change frequently with geographical location, however the general rules of thumb are mentioned to assist in making the final selection. The final selection is generally based on the available insolation rate, production
throughput, flexibility requirements, cost of fuel to run accessories as well as on the experience and judgment of the fabricator. As the solar dryer has a long life of about 20-40 years, the effect of a poor design can have a long-term impact on the economic health of the dryer.
Concentrated Solar Power Technologies (CSP)swapnil_energy
Analysis of Concentrated solar power (CSP) or Solar Thermal (STH) technologies with focus on its technology assessment, financials, challenge areas and solar market scenario
Solar thermal power generation systems use mirrors to collect sunlight and produce steam by solar heat to drive turbines for generating power. This system generates power by rotating turbines like thermal and nuclear power plants, and therefore, is suitable for large-scale power generation.
solar power satellite & microwave power transmissionbhavisha patel
In this seminar topic,I included all the things related SPS system & how microwave power transmission can done through magetron,retro directive beam controlling scheme & all.I also mentioned the design of optical rectenna & economic evolution of the topic.
Space-based solar power (SBSP) is the concept of collecting solar power in space (using an "SPS", that is, a "solar-power satellite" or a "satellite power system") for use on Earth.It has been in research since the early 1970s. SBSP would differ from current solar collection methods in that the means used to collect energy would reside on an orbiting satellite instead of on Earth's surface.
1. Efficient Direct Conversion of Sunlight to Coherent Light at High Average Power in Space
Richard L. Fork, Rustin L. Laycock, Dane J. Phillips, Wesley W. Walker, Spencer T. Cole, Sean D. Moultrie, John C. ReinhardtUniversity of Alabama in Huntsvilleforkr@uah.edu
NASA Institute for Advanced Concepts –Phase I Report
March 16, 2005
2. Outline
Goal: Optical Power Infrastructure in Earth-moon space
Methodology: Solar pumped solid state laser power oscillators most likely located primarily on the lunar surface combined with relay mirrors at L4 and L5 LaGrangian points
Results: Find an Optical Power Infrastructure providing needed power virtually anywherevirtually anytimeis allowed by fundamental physical laws
Conclusions: Direct attention to maturation of four technical advancesfor transforming sunlight to coherent light that are required. Could be accomplishedin time frame of exploration program.
3. MoonMultiple relay satellites in GEORelay satellite at L5 point Multiple distribution satellites in LEORelay satellite at L4 point MoonEarthGoal:Optical Power Infrastructure in Earth-moon space> 100 kW power virtually anywhereand virtually anytimein Earth- moon space
“Energy farms” on the moon
Require high average power high coherence power laser oscillators
4. Supply power from lunar surface to spacecraft near Earth
Use of LaGrangian points provides access to regions that might otherwise be obstructed by EarthSchematic and image of optical power deliveryL5Moon
Image of optical power being beamed to spacecraft near Earth
Optical beams would normally not be visible in space
5. Schematic and image of distribution of optical power to satellites in low Earth orbit and then to Earth’s atmosphere
Non-military vs. military use
e.g., atmospheric monitoringArray of remotely powered economical small satellites in LEO
6. Delivery of coherent power safely to Earth from spaceSafety beam at low intensity surrounds power beam
7. Propagation distance vs. beam radius
5 m
500 m
50 m
1.0 Gm
Earth-moon distance4λπ:/DL
10.0 Mm30 m384 Mm
100 Mm
L
e.g. liquid mirrors on moon
1.0 Mm
0.5 m
Mirror diameter D(λ~1 micron)
8. Initial Findings
•Billions of terawattsof continuously renewed clean solar power are available in Earth-moon space as sunlight
•Sunlightcannot be usefully redistributed by linear optical systems
•Optical power in the form of coherent light(as lowest order Gaussian modes of free space) can be distributed virtually anytime virtuallyanywhere in Earth-moon space
The principal need is to transform sunlight into coherent light at high average powerat reasonableefficiency in space
9. Transforming sunlight into coherent light at high average powerin space requires fourtechnical advances1. Concentratesolar pump power to the saturation intensity of a useful laser transition in a gain volume approximating the lowest order Gaussian mode of a near confocal resonator2. Remove waste heatfrom the gain volume in a manner that avoids unacceptable thermally induced optical distortion and stress3. Transfer the solar pump power efficiently and selectively into the lowest order Gaussian mode of a near confocal resonator4. Transform temporally and spatially coherent lightbeamed of Earth-moon distances at high efficiency, e.g. > 90%, into alternative, e.g. electrical powerLoadPV CellI
10. #1: Concentrate needed solar pump power in required volume at ~ saturation intensity of laser transition, e.g. 10 kW/cm2Spectrally filtered sunlight
Non-imaging concentrators
Tapered duct
Core doped with laser material
Design determined by optimizing concentration of pump power in most favorable geometry and dimensions using Advanced Systems Analysis Program (ASAP) (Hubble)
11. Selective absorption in central gain material doped region
Rays “bounce” in zigzag pattern, but are eventually absorbed with high probability in the gain material
Achieve integratedpump intensity substantially largerthan intensity at the surface of the Sun
12. “Multiple suns” point of view
Each concentrator contributes power to gain medium comparable to conventional concentrator16 non-imaging concentrators each concentrate sunlight to maximum intensity at a plane
3m length yields ~ 100 kW
> 80% of solar pump power is ~uniformly absorbed in the core region
End view1X3X
Sixteen timesthe effective intensity of one concentrator
13. Conventional optics for 8 collector concentrator
40 m~ 5 m
25 m
Estimate 4 kg/kW on basis of NASA optics
Projections- comparable to nuclear projections
Collecting area for 8 concentrators is 200 m2
At 1 kg/m2mass is 200 kg
<1 metric ton for 200 kW output
14. #2: Remove heat from gain medium while avoiding thermally induced lensing and distortion200K235K230KOptical axis
Heat removed axiallyfrom gain material having large thermo optic coefficient, e.g. YAG
Heat removed radiallyusing material having small thermo- optic coefficient and large thermal conductivity, e.g. diamond or undoped sapphire
Positivethermally induced lens is compensated by negativethermally induced lens
15. #3: Need large cross sectional area, e.g., 1.5 cm radius, lowest order Gaussian mode of a near confocal resonator of practical dimensions
Double confocal paraboloidal resonator
~ 3 m
Conventional lowest order Gaussian mode resonators would be kilometerslong
16. #3. Double confocal paraboloidal resonator using Brewster angle gain elements
Provides low lossgain elements
17. #3 Double confocal paraboloidal resonator using Brewster angle gain elements
Energy brought in by solar pump photons must be transferred with high probability to lowest order Gaussian mode
Selective transfer to the lowest order Gaussian mode requires selective lossintroduced in the resonator
18. Technical advances 1,2,and 3 provide means of delivering optical power throughout Earth-moon spaceMoonMultiple relay satellites in GEORelay satellite at L5 point Multiple distribution satellites in LEORelay satellite at L4 point MoonEarth
19. #4: Transform received optical power to alternative form, e.g., electrical, at high efficiencyat receiving siteLoadPV CellI
Requires matched coherentlight
()[]11lnηξξξ≅−+1kTh/ξν==
Have neglected all sources of inefficiency except for thermal mechanisms
20. Cost, income, specific power vs. year
CostIncome200020502025
Years
$10,000kW/kg
$/kg
0Specific Power1.000.5
$5,000
21. Current Experimental Results
Ti:sapphire0 ms24 ms50 mssapphiresapphireValidates transient approach
532 nm pump
Experimentally measured temperature profile in Ti:sapphire as a function of time
22. Plan of workEntech, Inc4.High efficiency optical to electrical3. Large area resonator with selective excitationNRL, ANL2. Removal of heat with no distortion? Nanostructured interfacesTransient pump probe experiment1. Concentration of solar pump powerPartnerTechnicaldevelopmentExperimentTASKAnalysisCompare results and simulationMeasure power concentration?Build scaled down resonator in our laser labPerform experiments on NASA diodesSample diodes to be builtCompare results and theoryParaboloidal reflectorsCompare results and predictions
Build concentrator elements
Laser for transient, heliostat for cw
23. Issues:
1.Can transient measurements provide data adequate to evaluate high cw power?
Ans. Longest relevant time constants are ~10 ms, so approach has scientific validity. Only way to perform meaningful experiments within current budget.
24. 2. What is the case for scalingto high total power at reasonable cost? Ans. The physical phenomena allow construction of small scale system that illustrates the key mechanisms. Build small scale system and project the cost. The answers will be found in the maturing of the technologies. No obvious reason cost will be a show stopper.
25. 3. What would be the cost of robotic assembly in space? Ans. We can make the system elements modular. The technology is similar to that of Project Lasso now being explored.
26. 4. Sounds to good to be true. Ans. Coherent light is different from conventional light. One may discover capabilities that were not fully anticipated.
27. Conclusions
1.An optical Power Infrastructure in Earth-moon space is allowedby fundamental physical laws
2.There are fourareas of technology maturation that are required to make such an infrastructure a possible
3.The advances that are required are difficult, but are likely to yield to determined efforts.
4.The cost benefit analysis strongly recommends making the effort.
28. Special thanks to this years UAH laser and optics classes!
Spring ’05 ST: Advanced Optics
ASHMORE, SHERMAN BLAIR CHRISTENSEN, JORDAN SCOTT
HANKS, JONATHAN BRAUNLILLEY, DARREN JOSEPH
RHODES, JAMES MATTHEWROSE, AMANDA ANN
YESKE, BENJAMIN SCOTTBOWEN, PAUL DENVA
CUNEO, JASON HOWARDREINHARDT, JOHN CHARLES
Fall ’04 Laser Systems
HANKS, JONATHAN BRAUNRHODES, JAMES MATTHEW
ROSE, AMANDA ANNSUTHERLAND, DANE RYAN
VADEN, JUSTIN PARKERYESKE, BENJAMIN SCOTT
ASHMORE, SHERMAN BLAIRCHRISTENSEN, JORDAN SCOTT
DANIEL, ROLAND ANTHONYHUAMANI, CAROLINA
MANN, MARK PAULMILLER, BRANDON JAY
PRESSNELL, CHADWICK STPRESTON, GREGORY CHARLES
CUNEO, JASON HOWARD WRIGHT, PATRICIA ZEORLIN
BOWEN, PAUL DENVA