1. Experiments
Your Name

2. Process• The tools that I have used throughout the this type of product are copy via layer, brightness and
contrast, curves, exposure, sharpen, blur, quick selection and spot healing brush. The tool which
I used for a specific reason was the quick selection tool to make the exact edition to the specific
parts of the car, so instead of having multiply effects going over the whole of the image. So this
is why I used this type of tool because to get the most difference to parts of the areas around
the car to stand out of the rest of car. In these specific area of car such as the bumper and with
the tyres I had made these two areas by using tools of brightness and contrast, exposure. I had
made these two changes to these specific areas because with the bumper I had made much
darker than any other parts on to the car. I had done this because to show the audience how
magnificent the front of car looks in this angle. Also with this expresses of defines the other
edges towards the front of car and makes the car see much bigger if it looks much darker along
the top. With the tyres I had made the inner lines of the tyres look darker than from outside
does. I had done this because to make them look more natural looking tyres of how you would
see in an advertisement. Also the other changes I have made by using this tool firstly too the
like the background, front windscreen and the grid in the middle of the car that’s slivery, grey. I
had to use this type of tool first for background because to make it blurry so then it wouldn’t be
the main factor in the image, however not to blurry so the background image doesn’t go to out
of place of blurriness. The front windscreen I just used the same tool to start of with to get my
particular part of windscreen I changed the brightness and contrast as I made it brighter a little
bit and then with the contrast I had made this part much darker. But I didn’t make it to darker
so you can see through it. Lastly with this quick selection used first by going around the sliver
and grey in the middle of between the headlights of each slide. For this grid I had made the
effects of by using the curves tool by to make it seem much darker in some areas but most of
them to seem much brighter with the hints of grey and sliver.
For the last parts to edit is to erase to get rid of the number
plate to do this by using the tool called spot healing brush.
By using this special tool will get rid of the numbers and
letters that was there but now has gone. But also with in
this editing the image and changing the effects, was making
the most of the car looking quite sharper than any other
thing in my image.

3. ProcessIn my process for this type of photo I used for the following starts of my
production. First I had got the image from my memory stick and then copied
it across as this processed to become a landscape. As I had made the
photograph to an angle at landscape way. Firstly on the photoshopping my
image of a range rover sport the newest version, is by making two duplicate
versions of the same background by making one duplicate for a black &
white to start off with. By hiding this version of the black & white. So then I
can make editing changes by using a tool called quick selection to choose
the front part of the body until the second door. I made the first selection to
make the editions to the tools are just the bright & contrast, as this effect
seems more effective towards the front of the car because how the light has
hit on to the car side make it seem like the sun light has hit on to the side of
car as it looks like its shinning through out the side. Also with the back of
the car I wanted to make it seem more much darker because of how the
light has not effected it. Also with this process I have made a quiet darker
blue by only using tools called curves and brightness & contrast.
Also with behind of the car I
have I made it much a darker
blue because it has been to
set in to the darkness of the
shadows. By also doing these
effects with a duplicated
section. However with this
as well I have done is chosen
the brake lights, fog lights,
and number plate. What I
have done to these three by
changing the brightness and
contrast and using curves. To
make these main colours
stand out from the rest of
the car instead of blue.
The lastly by changing the lighting around the
car to be come across darker than the actual
car. I think I have chosen this because to come
across to the audience that how amazing the
car looks against the kind of darker but not
darker to take anything away so it doesn’t look
unreal. When I had came to finish with the
different colours, I made the black & white
come to cover some of the car.

4. Reflection
• What elements of your experiments will you
include in your final product?
The elements in my experiment that I will use with in my final product is firstly with the effects that I
have used such as the colour schemes and then a hint of black and white going through some parts
of the photo. As I have done this on one of my experiments, (black and white part of photograph)
as this defines the more darker areas as makes the photograph dull and basic in that area so this
makes this part of the photo not the main focus of the photograph as the lighter colours or arrange
different parts of the photo springs out of the photo that which will appeal the attentions of my
audience. This would make the main bit of the photograph, of instead of look boring will add a few
effects to it that will be basic so a change of atmosphere. The colour effects which I have done is to
make some of the brighter colours stand out like main colours such as red, yellow and more, as
these colours are much vibrant colours so then you will see them first than any other colours that
are applied into the photograph. As well with the other elements that I have done in my
experiment with in the background I have used the tools to blur the background and the tool of
exposure to make the difference to light of brightness. As this makes the background much duller,
so this makes the main object of the photograph much more appealing so they that they will know
which part of the photograph is the main focus of it all.