Thermodynamics (Physics A Level)
•Download as PPTX, PDF•
4 likes•3,260 views
The document summarizes key concepts in thermodynamics: 1) The zeroth law establishes that temperature can be used to determine thermal equilibrium between systems in contact. 2) The first law mandates conservation of energy and establishes heat as a form of energy. 3) The second law states that entropy always increases and perpetual motion is impossible. 4) The third law concerns the entropy of a system at absolute zero temperature.
Report
Share
Report
Share
Recommended
Heat & Thermodynamics
This document defines key concepts related to heat transfer including:
- Heat is the transfer of energy between objects due to temperature differences and is measured in Joules.
- Temperature is determined by the motion of particles in a substance, with faster motion indicating a higher temperature.
- The three primary methods of heat transfer are conduction, convection, and radiation. Conduction involves direct contact, convection involves the transfer of heat by a liquid or gas, and radiation involves the transfer of heat through electromagnetic waves.
- Equations are provided to calculate heat transfer via conduction, convection, and radiation based on factors like thermal conductivity, heat transfer coefficient, surface area, and temperature differences.
2nd law of thermodynamic
this is my presentation about 2nd law of thermodynamic. this is part of engineering thermodynamic in mechanical engineering. here discussed about heat transfer, heat engines, thermal efficiency of heat pumps and refrigerator and its equation for perfect work done with best figure and table wise discription, entropy and change in entropy, isentropic process for turbines and compressor and many more.
Heat and thermodynamics
This document discusses key concepts in thermodynamics including heat, temperature, thermodynamics, the first law of thermodynamics, and reversible and irreversible processes. Thermodynamics is the branch of physics concerned with heat, temperature, and their relation to energy and work. Heat is a form of energy that flows from higher to lower temperature, and temperature determines the direction of heat flow. The first law of thermodynamics states that the total energy in an isolated system remains constant, as energy cannot be created or destroyed. Reversible processes can be retraced in the opposite direction, while irreversible processes cannot.
The first law of thermodynamics
The document summarizes the first law of thermodynamics. It states that energy cannot be created or destroyed, only changed from one form to another. The total amount of energy in the universe remains constant. Energy exists in many forms, including mechanical, heat, light, chemical and electrical. Thermodynamics is the study of energy and how it is transferred or changed from one system to another or between systems and their surroundings.
Thermodynamics, part 3.ppt
The document discusses the first law of thermodynamics. It provides equations and explanations for how the internal energy (U) of a system can change through heat (Q) added or removed from the system or work (W) done on or by the system. The first law is expressed as ΔU = Q - W. Specific processes discussed include adiabatic (no heat transfer), isobaric (constant pressure), isochoric (constant volume), and isothermal (constant temperature). Diagrams are used to illustrate these concepts and how to calculate work from changes in pressure and volume.
Entropy
- Any reversible process can be approximated by a series of reversible, isothermal and reversible, adiabatic processes connected by intermediate states.
- The heat interaction along the reversible path is equal to the heat interaction along the reversible isothermal path between the same initial and final states.
- Therefore, a reversible process can be replaced by a zig-zag path consisting of reversible adiabatic and isothermal processes, satisfying the first law of thermodynamics.
- According to the Clausius theorem, the integral of heat transfer divided by temperature around any cyclic process is equal to zero for a reversible process. This leads to the definition of entropy as a state function.
conduction
Basic of conduction,
Conduction through a slab,
Conduction of heat transfer through Hollow Cylinder
Second law of thermodynamics
The document discusses the limitations of the first law of thermodynamics and introduces the second law of thermodynamics. It explains that the first law does not account for the direction of energy transfer, while the second law states that heat will only flow spontaneously from hotter to colder bodies and not vice versa. The second law also establishes that it is impossible to convert all heat into work in a thermodynamic cycle. Various applications of the first and second laws are described, including heat engines, refrigerators, heat pumps, and the impossibility of building a perpetual motion machine of the second kind.
Recommended
Heat & Thermodynamics
This document defines key concepts related to heat transfer including:
- Heat is the transfer of energy between objects due to temperature differences and is measured in Joules.
- Temperature is determined by the motion of particles in a substance, with faster motion indicating a higher temperature.
- The three primary methods of heat transfer are conduction, convection, and radiation. Conduction involves direct contact, convection involves the transfer of heat by a liquid or gas, and radiation involves the transfer of heat through electromagnetic waves.
- Equations are provided to calculate heat transfer via conduction, convection, and radiation based on factors like thermal conductivity, heat transfer coefficient, surface area, and temperature differences.
2nd law of thermodynamic
this is my presentation about 2nd law of thermodynamic. this is part of engineering thermodynamic in mechanical engineering. here discussed about heat transfer, heat engines, thermal efficiency of heat pumps and refrigerator and its equation for perfect work done with best figure and table wise discription, entropy and change in entropy, isentropic process for turbines and compressor and many more.
Heat and thermodynamics
This document discusses key concepts in thermodynamics including heat, temperature, thermodynamics, the first law of thermodynamics, and reversible and irreversible processes. Thermodynamics is the branch of physics concerned with heat, temperature, and their relation to energy and work. Heat is a form of energy that flows from higher to lower temperature, and temperature determines the direction of heat flow. The first law of thermodynamics states that the total energy in an isolated system remains constant, as energy cannot be created or destroyed. Reversible processes can be retraced in the opposite direction, while irreversible processes cannot.
The first law of thermodynamics
The document summarizes the first law of thermodynamics. It states that energy cannot be created or destroyed, only changed from one form to another. The total amount of energy in the universe remains constant. Energy exists in many forms, including mechanical, heat, light, chemical and electrical. Thermodynamics is the study of energy and how it is transferred or changed from one system to another or between systems and their surroundings.
Thermodynamics, part 3.ppt
The document discusses the first law of thermodynamics. It provides equations and explanations for how the internal energy (U) of a system can change through heat (Q) added or removed from the system or work (W) done on or by the system. The first law is expressed as ΔU = Q - W. Specific processes discussed include adiabatic (no heat transfer), isobaric (constant pressure), isochoric (constant volume), and isothermal (constant temperature). Diagrams are used to illustrate these concepts and how to calculate work from changes in pressure and volume.
Entropy
- Any reversible process can be approximated by a series of reversible, isothermal and reversible, adiabatic processes connected by intermediate states.
- The heat interaction along the reversible path is equal to the heat interaction along the reversible isothermal path between the same initial and final states.
- Therefore, a reversible process can be replaced by a zig-zag path consisting of reversible adiabatic and isothermal processes, satisfying the first law of thermodynamics.
- According to the Clausius theorem, the integral of heat transfer divided by temperature around any cyclic process is equal to zero for a reversible process. This leads to the definition of entropy as a state function.
conduction
Basic of conduction,
Conduction through a slab,
Conduction of heat transfer through Hollow Cylinder
Second law of thermodynamics
The document discusses the limitations of the first law of thermodynamics and introduces the second law of thermodynamics. It explains that the first law does not account for the direction of energy transfer, while the second law states that heat will only flow spontaneously from hotter to colder bodies and not vice versa. The second law also establishes that it is impossible to convert all heat into work in a thermodynamic cycle. Various applications of the first and second laws are described, including heat engines, refrigerators, heat pumps, and the impossibility of building a perpetual motion machine of the second kind.
Chemical thermodynamics
This document provides an overview of chemical thermodynamics, including:
- The first law of thermodynamics which states that change in internal energy equals heat added plus work done.
- The second law of thermodynamics which states that the entropy of the universe increases for spontaneous processes.
- How changes in entropy and free energy determine whether processes are spontaneous, with spontaneous processes favoring higher entropy and more negative free energy.
Thermodynamic
Here are the key steps to derive the expression for heat of reaction at constant pressure:
1) For a chemical reaction occurring at constant pressure, the enthalpy change (ΔH) is equal to the heat absorbed or released by the system (qP).
2) Enthalpy change (ΔH) is defined as the change in internal energy (ΔU) plus the product of pressure (P) and change in volume (ΔV).
ΔH = ΔU + PΔV
3) For a reaction at constant pressure, the volume change (ΔV) is small and pressure remains constant.
4) From the first law of thermodynamics, the change in internal energy (Δ
Heat & internal energy
Okay, let's solve this step-by-step:
* Jogger generates 8.0x105 J of heat in 0.5 hours = 3,600 seconds
* Jogger's mass is 65 kg
* Specific heat capacity of the human body is 3500 J/(kg°C)
* Use the heat equation: Q = cmΔT
* Plug in the values: 8.0x105 J = (65 kg) x (3500 J/(kg°C)) x ΔT
* Solve for ΔT: ΔT = 8.0x105 J / (65 kg x 3500 J/(kg°C)) = 1°C
Therefore, if the heat were
Tp 11 internal energy (shared)
This document discusses the internal energy unit of an A-Level Physics course on thermal physics. It includes learning objectives about defining internal energy, how temperature increases relate to internal energy increases, and using the first law of thermodynamics. Specific topics covered include the internal energy of an ideal gas, changes in internal energy during phase changes, and demonstrations of work being done to change internal energies.
Specific heat-capacity
This document discusses specific heat capacity, which is the amount of heat required to raise the temperature of 1 gram of a substance by 1 degree Celsius. It explains that different substances have different specific heat capacities due to differences in their molecular structure. For example, water has a higher specific heat capacity than metals like iron because its molecules can absorb heat through rotation, vibration, and stretching of bonds between molecules. This allows water to resist temperature changes more than substances like iron or sand.
Clausius inequality and entropy
1. The document discusses the concept of entropy in thermodynamics.
2. It introduces Clausius inequality and how it led Clausius to define a new property called entropy.
3. Entropy is defined as the ratio of infinitesimal heat transfer to temperature during a reversible process. The entropy change of a system depends only on its initial and final states, not the path between them.
Ideal gases
The document discusses the kinetic theory of gases and ideal gases. It explains that gases are made up of constantly moving particles and the pressure and temperature of a gas can be defined based on the kinetic theory. It also describes the differences between ideal gases and real gases. The document then discusses several gas laws including Boyle's Law, Charles' Law, the pressure-temperature relationship, the general gas equation, Avogadro's Law, and the ideal gas law. It provides the equations for each gas law.
Thermal Expansion.
The document discusses thermal expansion and heat transfer. Thermal expansion refers to materials expanding when heated and contracting when cooled. The amount of expansion can vary between materials. One example of using thermal expansion is in bimetallic strips in thermostats. Heat transfer refers to the flow of heat within and between objects due to temperature differences. The three main types of heat transfer are radiation via electromagnetic waves, conduction through direct contact, and convection via currents in fluids. Specific heat and heat capacity refer to the energy required to increase the temperature of a substance.
4.1 Thermal Equilibrium
The mercury column in an uncalibrated thermometer is 18 mm in melting ice at 0°C and 138 mm in steam at 100°C. To find the length at 50°C, interpolate proportionally between the two known measurements - the length should be 78 mm.
Lecture 11 heat and phase changes
1) Heat is energy transferred due to a temperature difference without work. Specific heat is the amount of heat needed to change the temperature of a mass by a certain amount. Water has a very high specific heat.
2) Matter exists in solid, liquid, and gas phases. Phase changes involve a structural change of matter and absorb or release latent heat without changing temperature.
3) A phase diagram shows the relationships between pressure, temperature, and phases of a substance. The triple point is where solid, liquid, and gas phases coexist in equilibrium.
Second law of thermodynamics
1) The document discusses key concepts in thermodynamics including the limitations of the first law, heat engines, heat pumps, and parameters of performance like coefficient of performance.
2) It also covers the second law of thermodynamics including Kelvin-Planck and Clausius statements, perpetual motion machines, and the equivalence of the statements.
3) Additionally, it discusses Carnot's principle and cycle, the thermodynamic temperature scale, and an elementary treatment of the third law of thermodynamics.
Thermal Conductivity
This presentation is about the basics of thermal conductivity and its method, formula derivation and also its applications.
short but comprehensive
Introduction to thermodynamics
This document provides an introduction to thermodynamics. It defines thermodynamics as the science dealing with heat, work, and their relation to properties of matter and energy change. The document outlines the four laws of thermodynamics and describes the zeroth law regarding thermal equilibrium, the first law regarding conservation of energy and internal energy, the second law regarding limits on heat conversion and direction of processes, and the third law defining absolute zero entropy. Examples of engineering applications are given in areas like heat engines, refrigeration, and air conditioning. Key concepts discussed include system, surroundings, state, path, process, equilibrium, intensive/extensive properties, and reversible/irreversible processes.
2nd law of thermodynamics
The following presentation consists of information on limitation of 1st law, introduction to 2nd law, kelvin planks statement, Clausius statement, PPM 2, Carnot cycle, Carnot heat engines, etc
SSL9 The Second Law of Thermodynamics
Introduction to the second law
Thermal energy reservoirs
Heat engines
Thermal efficiency
The 2nd law: Kelvin-Planck statement
Refrigerators and heat pumps
Coefficient of performance (COP)
The 2nd law: Clasius statement
Perpetual motion machines
Reversible and irreversible processes
Irreversibility's, Internal and externally reversible processes
The Carnot cycle
The reversed Carnot cycle
The Carnot principles
The thermodynamic temperature scale
The Carnot heat engine
The quality of energy
The Carnot refrigerator and heat pump
Basic thermodynamics
In this PPT have have covered
1. Basic thermodynamics definition
2. Thermodynamics law
3. Properties , cycle, Process
4. Derivation of the Process
5.Formula for the numericals.
This topic is use full for those students who want to study basic thermodynamics as a part of their University syllabus.
Most of the university having basic Mechanical engineering as a subject and in this subject Thermodynamics is a topic so by this PPT our aim is to give presentable knowledge of the subject
Thermodynamics
M.THIRUNAVUKKARASU
Sr. LECTURER
Bharathiyar college of Engineering and Technology at karaikal
Tamil Nadu
Ideal & real gases
This document is a report on ideal and real gases submitted by eight students from the Chemical Engineering Department at Koya University. It includes an abstract, introduction, body with sections on what gases are, the two types of gases (ideal and real), differences between them, applications, and deviations from ideal gas behavior. The body contains figures and explanations of concepts. It concludes that ideal gases have theoretical, non-real properties, while real gas equations can be derived from the ideal gas law to account for intermolecular forces and particle volumes at different pressures and temperatures.
Thermodynamics.ppt
MAHARASHTRA STATE BOARD
CLASS XI AND XII
CHAPTER 4
THERMODYNAMICS
CONTENT
Introduction
Thermal equilibrium
Zeroth law of
Thermodynamics
Heat, internal energy and
work
First law of
thermodynamics
Specific heat capacity
Thermodynamic state
variables and equation of
state
Thermodynamic processes
Heat engines
Refrigerators and heat
pumps
Second law of
thermodynamics
Reversible and irreversible
processes
Carnot engine
Application of first law of thermodynamics
This document discusses the application of the first law of thermodynamics, or the steady flow energy equation (SFEE), to various thermodynamic systems. It states that for steady flow, the rate of fluid flow is constant, and defines the assumptions of the SFEE. The SFEE states that the increase in enthalpy from state 1 to 2 equals the heat added plus work done. The document then provides examples of applying the SFEE to systems like boilers, turbines, compressors, nozzles, and condensers. It derives the specific equations that relate heat, work, enthalpy, and kinetic energy for each system.
AP Physics - Chapter 15 Powerpoint
The document discusses the key concepts of thermodynamics including:
1) The first law of thermodynamics which states that the change in internal energy of a system is equal to the heat supplied plus work done.
2) The four main types of thermal processes - isobaric, isochoric, isothermal, and adiabatic - which involve constant pressure, volume, temperature, and no heat transfer respectively.
3) The second law of thermodynamics which states that heat spontaneously flows from hot to cold and not vice versa.
4) Heat engines which use heat to perform work and have an efficiency defined as the ratio of work done to input heat.
Laws of thermodynamics
Thermodynamics is the branch of physics that studies heat, work, and energy. It is governed by four main laws:
1) The zeroth law establishes that thermal equilibrium is transitive.
2) The first law states that energy is conserved and the change in a system's internal energy equals heat added minus work done.
3) The second law specifies that entropy always increases for isolated systems undergoing spontaneous processes and heat cannot be fully converted to work.
4) The third law affirms that entropy reaches a minimum, zero for perfect crystals, as temperature approaches absolute zero.
More Related Content
What's hot
Chemical thermodynamics
This document provides an overview of chemical thermodynamics, including:
- The first law of thermodynamics which states that change in internal energy equals heat added plus work done.
- The second law of thermodynamics which states that the entropy of the universe increases for spontaneous processes.
- How changes in entropy and free energy determine whether processes are spontaneous, with spontaneous processes favoring higher entropy and more negative free energy.
Thermodynamic
Here are the key steps to derive the expression for heat of reaction at constant pressure:
1) For a chemical reaction occurring at constant pressure, the enthalpy change (ΔH) is equal to the heat absorbed or released by the system (qP).
2) Enthalpy change (ΔH) is defined as the change in internal energy (ΔU) plus the product of pressure (P) and change in volume (ΔV).
ΔH = ΔU + PΔV
3) For a reaction at constant pressure, the volume change (ΔV) is small and pressure remains constant.
4) From the first law of thermodynamics, the change in internal energy (Δ
Heat & internal energy
Okay, let's solve this step-by-step:
* Jogger generates 8.0x105 J of heat in 0.5 hours = 3,600 seconds
* Jogger's mass is 65 kg
* Specific heat capacity of the human body is 3500 J/(kg°C)
* Use the heat equation: Q = cmΔT
* Plug in the values: 8.0x105 J = (65 kg) x (3500 J/(kg°C)) x ΔT
* Solve for ΔT: ΔT = 8.0x105 J / (65 kg x 3500 J/(kg°C)) = 1°C
Therefore, if the heat were
Tp 11 internal energy (shared)
This document discusses the internal energy unit of an A-Level Physics course on thermal physics. It includes learning objectives about defining internal energy, how temperature increases relate to internal energy increases, and using the first law of thermodynamics. Specific topics covered include the internal energy of an ideal gas, changes in internal energy during phase changes, and demonstrations of work being done to change internal energies.
Specific heat-capacity
This document discusses specific heat capacity, which is the amount of heat required to raise the temperature of 1 gram of a substance by 1 degree Celsius. It explains that different substances have different specific heat capacities due to differences in their molecular structure. For example, water has a higher specific heat capacity than metals like iron because its molecules can absorb heat through rotation, vibration, and stretching of bonds between molecules. This allows water to resist temperature changes more than substances like iron or sand.
Clausius inequality and entropy
1. The document discusses the concept of entropy in thermodynamics.
2. It introduces Clausius inequality and how it led Clausius to define a new property called entropy.
3. Entropy is defined as the ratio of infinitesimal heat transfer to temperature during a reversible process. The entropy change of a system depends only on its initial and final states, not the path between them.
Ideal gases
The document discusses the kinetic theory of gases and ideal gases. It explains that gases are made up of constantly moving particles and the pressure and temperature of a gas can be defined based on the kinetic theory. It also describes the differences between ideal gases and real gases. The document then discusses several gas laws including Boyle's Law, Charles' Law, the pressure-temperature relationship, the general gas equation, Avogadro's Law, and the ideal gas law. It provides the equations for each gas law.
Thermal Expansion.
The document discusses thermal expansion and heat transfer. Thermal expansion refers to materials expanding when heated and contracting when cooled. The amount of expansion can vary between materials. One example of using thermal expansion is in bimetallic strips in thermostats. Heat transfer refers to the flow of heat within and between objects due to temperature differences. The three main types of heat transfer are radiation via electromagnetic waves, conduction through direct contact, and convection via currents in fluids. Specific heat and heat capacity refer to the energy required to increase the temperature of a substance.
4.1 Thermal Equilibrium
The mercury column in an uncalibrated thermometer is 18 mm in melting ice at 0°C and 138 mm in steam at 100°C. To find the length at 50°C, interpolate proportionally between the two known measurements - the length should be 78 mm.
Lecture 11 heat and phase changes
1) Heat is energy transferred due to a temperature difference without work. Specific heat is the amount of heat needed to change the temperature of a mass by a certain amount. Water has a very high specific heat.
2) Matter exists in solid, liquid, and gas phases. Phase changes involve a structural change of matter and absorb or release latent heat without changing temperature.
3) A phase diagram shows the relationships between pressure, temperature, and phases of a substance. The triple point is where solid, liquid, and gas phases coexist in equilibrium.
Second law of thermodynamics
1) The document discusses key concepts in thermodynamics including the limitations of the first law, heat engines, heat pumps, and parameters of performance like coefficient of performance.
2) It also covers the second law of thermodynamics including Kelvin-Planck and Clausius statements, perpetual motion machines, and the equivalence of the statements.
3) Additionally, it discusses Carnot's principle and cycle, the thermodynamic temperature scale, and an elementary treatment of the third law of thermodynamics.
Thermal Conductivity
This presentation is about the basics of thermal conductivity and its method, formula derivation and also its applications.
short but comprehensive
Introduction to thermodynamics
This document provides an introduction to thermodynamics. It defines thermodynamics as the science dealing with heat, work, and their relation to properties of matter and energy change. The document outlines the four laws of thermodynamics and describes the zeroth law regarding thermal equilibrium, the first law regarding conservation of energy and internal energy, the second law regarding limits on heat conversion and direction of processes, and the third law defining absolute zero entropy. Examples of engineering applications are given in areas like heat engines, refrigeration, and air conditioning. Key concepts discussed include system, surroundings, state, path, process, equilibrium, intensive/extensive properties, and reversible/irreversible processes.
2nd law of thermodynamics
The following presentation consists of information on limitation of 1st law, introduction to 2nd law, kelvin planks statement, Clausius statement, PPM 2, Carnot cycle, Carnot heat engines, etc
SSL9 The Second Law of Thermodynamics
Introduction to the second law
Thermal energy reservoirs
Heat engines
Thermal efficiency
The 2nd law: Kelvin-Planck statement
Refrigerators and heat pumps
Coefficient of performance (COP)
The 2nd law: Clasius statement
Perpetual motion machines
Reversible and irreversible processes
Irreversibility's, Internal and externally reversible processes
The Carnot cycle
The reversed Carnot cycle
The Carnot principles
The thermodynamic temperature scale
The Carnot heat engine
The quality of energy
The Carnot refrigerator and heat pump
Basic thermodynamics
In this PPT have have covered
1. Basic thermodynamics definition
2. Thermodynamics law
3. Properties , cycle, Process
4. Derivation of the Process
5.Formula for the numericals.
This topic is use full for those students who want to study basic thermodynamics as a part of their University syllabus.
Most of the university having basic Mechanical engineering as a subject and in this subject Thermodynamics is a topic so by this PPT our aim is to give presentable knowledge of the subject
Thermodynamics
M.THIRUNAVUKKARASU
Sr. LECTURER
Bharathiyar college of Engineering and Technology at karaikal
Tamil Nadu
Ideal & real gases
This document is a report on ideal and real gases submitted by eight students from the Chemical Engineering Department at Koya University. It includes an abstract, introduction, body with sections on what gases are, the two types of gases (ideal and real), differences between them, applications, and deviations from ideal gas behavior. The body contains figures and explanations of concepts. It concludes that ideal gases have theoretical, non-real properties, while real gas equations can be derived from the ideal gas law to account for intermolecular forces and particle volumes at different pressures and temperatures.
Thermodynamics.ppt
MAHARASHTRA STATE BOARD
CLASS XI AND XII
CHAPTER 4
THERMODYNAMICS
CONTENT
Introduction
Thermal equilibrium
Zeroth law of
Thermodynamics
Heat, internal energy and
work
First law of
thermodynamics
Specific heat capacity
Thermodynamic state
variables and equation of
state
Thermodynamic processes
Heat engines
Refrigerators and heat
pumps
Second law of
thermodynamics
Reversible and irreversible
processes
Carnot engine
Application of first law of thermodynamics
This document discusses the application of the first law of thermodynamics, or the steady flow energy equation (SFEE), to various thermodynamic systems. It states that for steady flow, the rate of fluid flow is constant, and defines the assumptions of the SFEE. The SFEE states that the increase in enthalpy from state 1 to 2 equals the heat added plus work done. The document then provides examples of applying the SFEE to systems like boilers, turbines, compressors, nozzles, and condensers. It derives the specific equations that relate heat, work, enthalpy, and kinetic energy for each system.
What's hot (20)
Viewers also liked
AP Physics - Chapter 15 Powerpoint
The document discusses the key concepts of thermodynamics including:
1) The first law of thermodynamics which states that the change in internal energy of a system is equal to the heat supplied plus work done.
2) The four main types of thermal processes - isobaric, isochoric, isothermal, and adiabatic - which involve constant pressure, volume, temperature, and no heat transfer respectively.
3) The second law of thermodynamics which states that heat spontaneously flows from hot to cold and not vice versa.
4) Heat engines which use heat to perform work and have an efficiency defined as the ratio of work done to input heat.
Laws of thermodynamics
Thermodynamics is the branch of physics that studies heat, work, and energy. It is governed by four main laws:
1) The zeroth law establishes that thermal equilibrium is transitive.
2) The first law states that energy is conserved and the change in a system's internal energy equals heat added minus work done.
3) The second law specifies that entropy always increases for isolated systems undergoing spontaneous processes and heat cannot be fully converted to work.
4) The third law affirms that entropy reaches a minimum, zero for perfect crystals, as temperature approaches absolute zero.
Engineering thermodynemics-difference between heat and work
Heat and work are both forms of energy transfer but they differ in key ways. Work is the energy transferred by a force acting through a distance and is dependent on the path, while heat is transferred between systems or a system and its surroundings due to a temperature difference and is dependent on the state. Specifically, work is defined as pressure-volume work in thermodynamics and is a function of the path, whereas heat is defined as the transfer of energy between bodies with different temperatures and is a function of the system's state. While both are transient quantities during state changes, work can be more efficiently converted to other forms of energy than heat.
Gas
This document summarizes key concepts about gases from a chemistry textbook. It discusses the properties of gases, gas pressure, gas laws including Boyle's law, Charles' law, Gay-Lussac's law, Avogadro's law, and the ideal gas law. It also covers gas behavior such as diffusion and effusion according to Graham's law, and mixtures of gases based on Dalton's law of partial pressures.
Law’s of thermodynamics
The document summarizes the four laws of thermodynamics:
1) The zeroth law establishes that thermal equilibrium is transitive.
2) The first law states that energy is conserved and relates heat, work, and changes in internal energy.
3) The second law says entropy always increases in spontaneous processes and Gibbs free energy always decreases.
4) The third law establishes that entropy reaches a minimum, zero, at absolute zero temperature.
02 part2 thermo laws first law
The document discusses the first law of thermodynamics. It states that the first law is based on the principle of conservation of energy, where the net heat supplied to a system equals the net work done by that system. The first law considers the heat, work, and energy involved in reactions. Energy can be transformed from one form to another but can neither be created nor destroyed according to the first law. The document also mentions internal energy and provides references for further reading on thermodynamics and its laws.
Gas properties (teach)
Slideshow with 4 short video imbedded showing some properties of several gases that can be generated in the elementary lab as demonstrations.
Would very much like to hear from anyone who downloads this to learn if the imbedded videos play.
Thermodynamic Chapter 6 Thermal Power Plant
This document provides information about gas turbine and steam power plant cycles. It describes the Brayton cycle used in gas turbines and the Rankine cycle used in steam power plants. It discusses components, processes, thermal efficiencies and improvements to the cycles such as regeneration, intercooling and reheating. Examples are provided to calculate efficiency, work and heat inputs/outputs for simple and improved cycles.
The laws of thermodynamics
This document discusses the connections between heat and work through the laws of thermodynamics. It introduces the three laws of thermodynamics:
1) The zeroth law establishes that thermal equilibrium is transitive.
2) The first law states that the change in internal energy of a system is equal to the heat added minus the work done.
3) The second law establishes that heat cannot spontaneously flow from a cold to a hot body, and limits the maximum possible efficiency of heat engines and refrigerators.
Heat engines and refrigerators/heat pumps are then discussed as examples of applying the laws of thermodynamics to transfer heat from hot to cold reservoirs to produce work or vice versa. Key concepts like
Laws of thermodynamics
The four laws of thermodynamics define fundamental physical quantities like temperature, energy, and entropy that characterize systems in thermal equilibrium, and describe how these quantities behave under different conditions, prohibiting certain phenomena like perpetual motion. The laws were established after Count Rumford showed in 1797 that mechanical action can generate unlimited heat from a fixed amount of material, challenging earlier theories of heat. The first law was then formulated by Sadi Carnot in 1824.
Refractories and its types www.chemicallibrary.blogspot.com
This document discusses refractory materials, which are non-metallic materials that retain their strength and do not fuse at high temperatures. Refractories can be classified based on their chemical composition, manufacturing method, and refractoriness. Common refractory materials include fire clay, silica, chromite, magnesia, and alumina. Key properties of refractories include porosity, refractoriness, strength, thermal conductivity, spalling resistance, and slag and abrasion resistance. Refractories are selected based on their application, operating temperatures, and stress conditions. Common applications include furnaces, boilers, and the cement industry.
Properties of Gases
The document discusses the gas laws and properties of gases. It begins by describing the composition of Earth's atmosphere, which is primarily nitrogen and oxygen. It then discusses that gases have mass and low densities compared to liquids and solids. The document outlines four variables that describe gases - pressure, volume, temperature, and amount. It explains concepts such as gas compressibility, units of measurement for gases, and the kinetic molecular theory which describes gas particles as being in constant random motion.
Circular motion
This document discusses circular motion and provides examples and explanations of key concepts related to circular motion, including:
1) Circular motion is defined as motion along a complete or partial circle. Centripetal force is required to produce the acceleration needed for circular motion.
2) Examples of centripetal force include tension in a string for a body whirled in a circle, friction for a car rounding a turn, and gravitational attraction for objects like moons orbiting planets.
3) Centripetal acceleration always points toward the center of the circular path and has a magnitude of v^2/r, where v is the object's speed and r is the radius of the path. Radial acceleration equals the
Basic concepts
This document provides an overview of basic thermodynamics concepts including definitions of thermodynamics, thermodynamic systems, properties, processes and cycles. It discusses important thermodynamic concepts such as state, path, reversible and irreversible processes, equilibrium, and measurement of pressure. Examples are given to illustrate compression processes and the use of the Pascal's law for pressure measurement.
Order of reaction
This document discusses key concepts in chemical kinetics including:
1) Chemical kinetics deals with the rates of chemical reactions and their mechanisms.
2) The rate of a reaction is defined as the decrease in reactant concentration or increase in product concentration over time.
3) The order of a reaction refers to the power to which the concentration of a reactant is raised in the rate law expression.
Dielectrics
This document discusses different types of dielectric materials including solids, liquids, and gases. Some key solid dielectrics mentioned are mica, glass, rubber, and ceramics. The main liquid dielectrics described are mineral oils, synthetic oils, and miscellaneous oils. Gaseous dielectrics include air, nitrogen, sulfur hexafluoride, and inert gases. The document also discusses specific dielectric materials like mica, glass, asbestos, and rubber. It describes the composition and properties of each and their applications, particularly in capacitors and transformers.
Refractories
Refractories are materials that can withstand high temperatures without softening or deformation. They are used in industries like metallurgy, engineering, and chemicals to line furnaces, tanks, and kilns. Refractories must have characteristics like infusibility at high operating temperatures, chemical inertness, strength under load, and resistance to thermal spalling and abrasion. They are classified as acid, basic, or neutral based on their chemical composition and properties evaluated include refractoriness, strength under load, thermal expansion, conductivity, porosity, and resistance to spalling and abrasion. Proper selection of refractories based on these properties is important for industrial furnace design and operation.
Thermodynamics notes[1]
The document discusses thermodynamics from both macroscopic and microscopic viewpoints. It defines key concepts like system, surroundings, open and closed systems, intensive and extensive properties, state, equilibrium, processes, cycles, work, heat transfer, and different types of thermodynamic processes. Specific processes discussed include isobaric, isochoric, isothermal, and polytropic processes. The document also explains the zeroth law of thermodynamics and its importance for temperature measurement.
Physical chemistry
This document provides an overview of physical chemistry and its branches, which include thermodynamics, quantum chemistry, statistical mechanics, and kinetics. It discusses various concepts in physical chemistry such as thermodynamic systems and properties, the laws of thermodynamics, entropy, Gibbs free energy, and thermodynamic calculations. Key areas covered are the branches of physical chemistry and why it is important for chemical engineers, as well as explanations of concepts like thermodynamic equilibrium, state functions, and the measurement of temperature.
Electrostatics Class 12- Part 2
This document discusses the concepts of electric fields and electric field intensity. It defines electric field as a region of space around charged particles that exert electrostatic forces on other charges. Electric field intensity is defined as the electrostatic force per unit positive test charge. The electric field due to a point charge is discussed, along with the superposition principle and electric field lines. Electric dipoles are introduced as pairs of equal and opposite charges, with discussions of dipole moment, and the electric field intensity and torque experienced by dipoles.
Viewers also liked (20)
Engineering thermodynemics-difference between heat and work
Engineering thermodynemics-difference between heat and work
Refractories and its types www.chemicallibrary.blogspot.com
Refractories and its types www.chemicallibrary.blogspot.com
Similar to Thermodynamics (Physics A Level)
Laws of thermodynamics
The document discusses the four laws of thermodynamics: (1) the zeroth law which underlies the definition of temperature, (2) the first law which mandates conservation of energy and states that heat is a form of energy, (3) the second law which states that entropy of the universe always increases, and (4) the third law which concerns entropy at absolute zero temperature. It also defines key thermodynamic concepts like internal energy, heat, and work.
thermodynamics ppt.pptx
Thermodynamics is the branch of physics that deals with heat and other forms of energy. The first law of thermodynamics states that the total energy of a system remains constant, such that any increase in one form of energy (such as heat) results in an equal decrease in another form (such as work). The second law states that heat cannot spontaneously flow from a colder body to a hotter body without an input of work. The third law states that the entropy of a perfect crystal approaches zero as the temperature approaches absolute zero.
Heat death of Universe
Heat death of the Universe/the big freeze/ the end of the universe quantum mechanically and statistical mechanically.
Temperature and laws of thermodynamics
This document summarizes a presentation by the group "THATA" on temperature and the laws of thermodynamics. It introduces the group members and defines heat and temperature. It then explains the first law of thermodynamics as the conservation of energy, the second law as the tendency for energy to disperse from concentrated to diffuse forms, and the zeroth law as the transitive property of thermal equilibrium between objects at the same temperature. Diagrams illustrate isobaric and isothermal processes and the calculation of work done.
Thermodynamic lecture
Thermodynamics deals with energy and its transformation between different forms. The first law of thermodynamics states that energy cannot be created or destroyed, only transformed from one form to another. A thermodynamic system exchanges energy in the form of heat or work with its surroundings. Closed systems exchange only energy, while open systems can exchange both energy and matter. Thermodynamic properties like pressure, temperature, and volume are used to describe different thermodynamic processes that occur at either constant values (isobaric, isochoric, isothermal) or with varying values.
Termodinamika
Thermodynamics describes the relationship between heat and work for a system and its surroundings. A system is separated from its surroundings by walls that may allow heat transfer (diathermal) or not (adiabatic). A system's state is specified by properties like pressure, volume, temperature, and mass. The zeroth law states that if two systems are in thermal equilibrium with a third, they are in equilibrium with each other. The first law relates changes in a system's internal energy to heat and work. Thermal processes like isobaric, isochoric, isothermal, and adiabatic involve constant pressure, volume, temperature, or no heat transfer respectively.
Thermodynamics
The document discusses several topics in thermodynamics:
1. It defines internal energy (U) as the total energy of a system, composed of different sources like chemical, electronic, nuclear, and kinetic energies. The first law of thermodynamics states that for an isolated system, the total internal energy remains constant.
2. It discusses heat capacity and how the heat capacity of solids approaches zero as temperature approaches absolute zero, following a T^3 relationship. Einstein and Debye proposed models to explain this using quantized vibrational motions of atoms in the crystal lattice.
3. It covers the second law of thermodynamics, defining entropy change for a heat transfer and stating that the total entropy of
Applied physics sem 2 polytechnic
This document discusses key concepts in thermodynamics including:
1. Thermodynamics is concerned with energy relationships involving heat, mechanical energy, and other aspects of energy transfer between systems and their surroundings. Temperature is a measure of an object's hotness or coldness.
2. The zeroth law of thermodynamics allows the definition of temperature and states that if two bodies are in thermal equilibrium with a third body, they are in thermal equilibrium with each other.
3. An ideal gas is a theoretical gas that follows the ideal gas law (PV=nRT) and behaves similarly to real gases at high temperatures and low pressures. The ideal gas law relates the pressure, volume, temperature, and amount
Applied physics sem 2 polytechnic
This document discusses key concepts in thermodynamics including:
1. Thermodynamics is concerned with energy relationships involving heat, mechanical energy, and other aspects of energy transfer between systems and their surroundings. Temperature is a measure of an object's hotness or coldness.
2. The zeroth law of thermodynamics allows the definition of temperature and states that if two bodies are in thermal equilibrium with a third body, they are in thermal equilibrium with each other.
3. An ideal gas is a theoretical gas that follows the ideal gas law (PV=nRT) and behaves similarly to real gases at high temperatures and low pressures. The ideal gas law relates the pressure, volume, temperature, and amount
Lecture No.3.pptx A good slide for students
Thermal equilibrium exists between two bodies if they are at the same temperature, meaning there is no net transfer of thermal energy between them. The zeroth law of thermodynamics states that if two bodies are in thermal equilibrium with a third body, they are also in thermal equilibrium with each other. Temperature is directly related to the average kinetic energy of particles in a substance. Specific heat refers to the amount of energy required to raise the temperature of a substance and depends on whether volume or pressure is kept constant during the temperature change.
Ees104 thermodynamics
This document provides definitions and concepts related to engineering mechanics and thermodynamics. It discusses three types of thermodynamic systems - closed, open, and isolated. Key concepts explained include properties of a system, pressure, energy, heat, work, and the three laws of thermodynamics. The first law states that heat and work are mutually convertible but energy cannot be created or destroyed. The second law states that it is impossible to convert all heat into work in a cyclic process and that heat cannot spontaneously flow from a cold to hot body without external work. Thermodynamic processes involve changes in a system's state, and a cycle occurs when the final state matches the initial state.
Thermodynamics.PPT
Thermodynamics deals with concepts of heat, temperature, and energy conversion. Thermal equilibrium occurs between substances when there is no further heat transfer between them. Internal energy is the total energy of all atoms and molecules in a substance due to their random motion. Thermodynamic systems are classified as open, closed, or isolated based on heat and matter transfer ability. The first law of thermodynamics relates heat and work through a mathematical equation. Entropy is a measure of disorder or randomness that increases for energy received by a system and decreases for energy given out. The second law of thermodynamics prohibits heat from spontaneously flowing from cold to hot without work.
Theme 5.pptx
1. The second law of thermodynamics states that entropy, a measure of disorder, always increases over time for an isolated system.
2. Entropy has two components - internal entropy generated within a system and external entropy generated by interactions with the outside environment.
3. The second law can be restated as: entropy can never decrease for a closed system, and the external entropy change is associated with the change in heat per temperature for the system. Increases in entropy correspond to irreversible processes.
Law's of thermodynamics
The document summarizes the main laws of thermodynamics:
The First Law states that energy can neither be created nor destroyed, only changed in form. The Second Law states that heat spontaneously flows from hotter to colder bodies until they reach the same temperature. Entropy, a measure of disorder, always increases over time as energy spreads out. The Third Law establishes that entropy approaches a minimum, constant value as temperature approaches absolute zero. The Zeroth Law defines temperature as a physical property of a system, such that systems in thermal equilibrium have the same temperature.
Thermo+hmt+power plant basics
This document defines key concepts in thermodynamics including the three laws of thermodynamics, extensive and intensive properties, thermal equilibrium, and various thermodynamic processes like isochoric, isobaric, and isothermal processes. It also defines other important thermodynamic concepts such as entropy, enthalpy, thermal conductivity, latent and sensible heat, modes of heat transfer, and laws like Fourier's law of conduction and Newton's law of cooling. Gas turbines, steam turbines, and nozzles are also defined.
Laws Of Thermodynamics
The document summarizes the four laws of thermodynamics:
1) The first law states that energy cannot be created or destroyed, only changed in form.
2) The second law states that the entropy of an isolated system always increases.
3) The third law states that the entropy of a system approaches a minimum, zero, as the temperature approaches absolute zero.
4) There is no universally accepted fourth law, but some proposals include the Onsager reciprocal relations regarding heat and matter flow parameters.
Heat 2 (thermodynamics)
The document discusses the laws of thermodynamics and some key thermodynamic concepts:
1) It outlines the zeroth, first, second, and third laws of thermodynamics. The first law relates changes in internal energy to heat and work. The second law involves heat flow and limits on heat engine efficiency.
2) It defines important thermodynamic processes like isothermal, adiabatic, and isochoric and explains how their graphs relate temperature, pressure, and volume changes.
3) Key concepts covered include the internal energy of gases, work done by gases during expansion, and the specific heats of gases at constant volume and pressure.
Thermodynamics 2
This ppt describes some concepts in thermodynamics like entropy, change in entropy, change in entropy in reversible process, second law of thermodynamics, T-S diagram, Third law of thermodynamics, Heat death of universe, etc.
BASIC OF HEAT TRANSFER
The document discusses heat and mass transfer. It outlines objectives related to understanding thermodynamics and heat transfer mechanisms. The key mechanisms of heat transfer are conduction, convection and radiation. Heat transfer occurs through these three modes simultaneously in many practical systems. Fourier's law, Newton's law of cooling, and the Stefan-Boltzmann law govern conductive, convective and radiative heat transfer respectively.
Similar to Thermodynamics (Physics A Level) (20)
Thermodynamics and laws of thermodynamics and osmotic or diffusion
Thermodynamics and laws of thermodynamics and osmotic or diffusion
Recently uploaded
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless ReproducibilityUniversity of Rennes, INSA Rennes, Inria/IRISA, CNRS
The ability to recreate computational results with minimal effort and actionable metrics provides a solid foundation for scientific research and software development. When people can replicate an analysis at the touch of a button using open-source software, open data, and methods to assess and compare proposals, it significantly eases verification of results, engagement with a diverse range of contributors, and progress. However, we have yet to fully achieve this; there are still many sociotechnical frictions.
Inspired by David Donoho's vision, this talk aims to revisit the three crucial pillars of frictionless reproducibility (data sharing, code sharing, and competitive challenges) with the perspective of deep software variability.
Our observation is that multiple layers — hardware, operating systems, third-party libraries, software versions, input data, compile-time options, and parameters — are subject to variability that exacerbates frictions but is also essential for achieving robust, generalizable results and fostering innovation. I will first review the literature, providing evidence of how the complex variability interactions across these layers affect qualitative and quantitative software properties, thereby complicating the reproduction and replication of scientific studies in various fields.
I will then present some software engineering and AI techniques that can support the strategic exploration of variability spaces. These include the use of abstractions and models (e.g., feature models), sampling strategies (e.g., uniform, random), cost-effective measurements (e.g., incremental build of software configurations), and dimensionality reduction methods (e.g., transfer learning, feature selection, software debloating).
I will finally argue that deep variability is both the problem and solution of frictionless reproducibility, calling the software science community to develop new methods and tools to manage variability and foster reproducibility in software systems.
Exposé invité Journées Nationales du GDR GPL 2024
Applied Science: Thermodynamics, Laws & Methodology.pdf
When I was asked to give a companion lecture in support of ‘The Philosophy of Science’ (https://shorturl.at/4pUXz) I decided not to walk through the detail of the many methodologies in order of use. Instead, I chose to employ a long standing, and ongoing, scientific development as an exemplar. And so, I chose the ever evolving story of Thermodynamics as a scientific investigation at its best.
Conducted over a period of >200 years, Thermodynamics R&D, and application, benefitted from the highest levels of professionalism, collaboration, and technical thoroughness. New layers of application, methodology, and practice were made possible by the progressive advance of technology. In turn, this has seen measurement and modelling accuracy continually improved at a micro and macro level.
Perhaps most importantly, Thermodynamics rapidly became a primary tool in the advance of applied science/engineering/technology, spanning micro-tech, to aerospace and cosmology. I can think of no better a story to illustrate the breadth of scientific methodologies and applications at their best.
原版制作(carleton毕业证书)卡尔顿大学毕业证硕士文凭原版一模一样
原版纸张【微信：741003700 】【(carleton毕业证书)卡尔顿大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Immersive Learning That Works: Research Grounding and Paths Forward
We will metaverse into the essence of immersive learning, into its three dimensions and conceptual models. This approach encompasses elements from teaching methodologies to social involvement, through organizational concerns and technologies. Challenging the perception of learning as knowledge transfer, we introduce a 'Uses, Practices & Strategies' model operationalized by the 'Immersive Learning Brain' and ‘Immersion Cube’ frameworks. This approach offers a comprehensive guide through the intricacies of immersive educational experiences and spotlighting research frontiers, along the immersion dimensions of system, narrative, and agency. Our discourse extends to stakeholders beyond the academic sphere, addressing the interests of technologists, instructional designers, and policymakers. We span various contexts, from formal education to organizational transformation to the new horizon of an AI-pervasive society. This keynote aims to unite the iLRN community in a collaborative journey towards a future where immersive learning research and practice coalesce, paving the way for innovative educational research and practice landscapes.
The binding of cosmological structures by massless topological defects
Assuming spherical symmetry and weak field, it is shown that if one solves the Poisson equation or the Einstein field
equations sourced by a topological defect, i.e. a singularity of a very specific form, the result is a localized gravitational
field capable of driving flat rotation (i.e. Keplerian circular orbits at a constant speed for all radii) of test masses on a thin
spherical shell without any underlying mass. Moreover, a large-scale structure which exploits this solution by assembling
concentrically a number of such topological defects can establish a flat stellar or galactic rotation curve, and can also deflect
light in the same manner as an equipotential (isothermal) sphere. Thus, the need for dark matter or modified gravity theory is
mitigated, at least in part.
在线办理(salfor毕业证书)索尔福德大学毕业证毕业完成信一模一样
学校原件一模一样【微信：741003700 】《(salfor毕业证书)索尔福德大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
如何办理(uvic毕业证书)维多利亚大学毕业证本科学位证书原版一模一样
原版纸张【微信：741003700 】【(uvic毕业证书)维多利亚大学毕业证】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero WaterTexas Alliance of Groundwater Districts
Presented at June 6-7 Texas Alliance of Groundwater Districts Business Meeting20240520 Planning a Circuit Simulator in JavaScript.pptx
Evaporation step counter work. I have done a physical experiment.
(Work in progress.)
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...Abdul Wali Khan University Mardan,kP,Pakistan
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skillsCompexometric titration/Chelatorphy titration/chelating titration
Classification
Metal ion ion indicators
Masking and demasking reagents
Estimation of Magnisium sulphate
Calcium gluconate
Complexometric Titration/ chelatometry titration/chelating titration, introduction, Types-
1.Direct Titration
2.Back Titration
3.Replacement Titration
4.Indirect Titration
Masking agent, Demasking agents
formation of complex
comparition between masking and demasking agents,
Indicators/Metal ion indicators/ Metallochromic indicators/pM indicators,
Visual Technique,PM indicators (metallochromic), Indicators of pH, Redox Indicators
Instrumental Techniques-Photometry
Potentiometry
Miscellaneous methods.
Complex titration with EDTA.
8.Isolation of pure cultures and preservation of cultures.pdf
Isolation of pure culture, its various method.
Equivariant neural networks and representation theory
Or: Beyond linear.
Abstract: Equivariant neural networks are neural networks that incorporate symmetries. The nonlinear activation functions in these networks result in interesting nonlinear equivariant maps between simple representations, and motivate the key player of this talk: piecewise linear representation theory.
Disclaimer: No one is perfect, so please mind that there might be mistakes and typos.
dtubbenhauer@gmail.com
Corrected slides: dtubbenhauer.com/talks.html
ESR spectroscopy in liquid food and beverages.pptx
With increasing population, people need to rely on packaged food stuffs. Packaging of food materials requires the preservation of food. There are various methods for the treatment of food to preserve them and irradiation treatment of food is one of them. It is the most common and the most harmless method for the food preservation as it does not alter the necessary micronutrients of food materials. Although irradiated food doesn’t cause any harm to the human health but still the quality assessment of food is required to provide consumers with necessary information about the food. ESR spectroscopy is the most sophisticated way to investigate the quality of the food and the free radicals induced during the processing of the food. ESR spin trapping technique is useful for the detection of highly unstable radicals in the food. The antioxidant capability of liquid food and beverages in mainly performed by spin trapping technique.
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...University of Maribor
Slides from talk:
Aleš Zamuda: Remote Sensing and Computational, Evolutionary, Supercomputing, and Intelligent Systems.
11th International Conference on Electrical, Electronics and Computer Engineering (IcETRAN), Niš, 3-6 June 2024
Inter-Society Networking Panel GRSS/MTT-S/CIS Panel Session: Promoting Connection and Cooperation
https://www.etran.rs/2024/en/home-english/Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
The pygmy halfbeak Dermogenys colletei, is known for its viviparous nature, this presents an intriguing case of relatively low fecundity, raising questions about potential compensatory reproductive strategies employed by this species. Our study delves into the examination of fecundity and the Gonadosomatic Index (GSI) in the Pygmy Halfbeak, D. colletei (Meisner, 2001), an intriguing viviparous fish indigenous to Sarawak, Borneo. We hypothesize that the Pygmy halfbeak, D. colletei, may exhibit unique reproductive adaptations to offset its low fecundity, thus enhancing its survival and fitness. To address this, we conducted a comprehensive study utilizing 28 mature female specimens of D. colletei, carefully measuring fecundity and GSI to shed light on the reproductive adaptations of this species. Our findings reveal that D. colletei indeed exhibits low fecundity, with a mean of 16.76 ± 2.01, and a mean GSI of 12.83 ± 1.27, providing crucial insights into the reproductive mechanisms at play in this species. These results underscore the existence of unique reproductive strategies in D. colletei, enabling its adaptation and persistence in Borneo's diverse aquatic ecosystems, and call for further ecological research to elucidate these mechanisms. This study lends to a better understanding of viviparous fish in Borneo and contributes to the broader field of aquatic ecology, enhancing our knowledge of species adaptations to unique ecological challenges.
SAR of Medicinal Chemistry 1st by dk.pdf
In this presentation include the prototype drug SAR on thus or with their examples .
Syllabus of Second Year B. Pharmacy
2019 PATTERN.
Recently uploaded (20)
Deep Software Variability and Frictionless Reproducibility
Deep Software Variability and Frictionless Reproducibility
Applied Science: Thermodynamics, Laws & Methodology.pdf
Applied Science: Thermodynamics, Laws & Methodology.pdf
Immersive Learning That Works: Research Grounding and Paths Forward
Immersive Learning That Works: Research Grounding and Paths Forward
The binding of cosmological structures by massless topological defects
The binding of cosmological structures by massless topological defects
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
Sharlene Leurig - Enabling Onsite Water Use with Net Zero Water
20240520 Planning a Circuit Simulator in JavaScript.pptx
20240520 Planning a Circuit Simulator in JavaScript.pptx
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
THEMATIC APPERCEPTION TEST(TAT) cognitive abilities, creativity, and critic...
Compexometric titration/Chelatorphy titration/chelating titration
Compexometric titration/Chelatorphy titration/chelating titration
8.Isolation of pure cultures and preservation of cultures.pdf
8.Isolation of pure cultures and preservation of cultures.pdf
Equivariant neural networks and representation theory
Equivariant neural networks and representation theory
ESR spectroscopy in liquid food and beverages.pptx
ESR spectroscopy in liquid food and beverages.pptx
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Remote Sensing and Computational, Evolutionary, Supercomputing, and Intellige...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Unlocking the mysteries of reproduction: Exploring fecundity and gonadosomati...
Thermodynamics (Physics A Level)
- 2. LAWS OF THERMODYNAMICS The zeroth law of thermodynamics, which underlies the definition of temperature. The first law of thermodynamics, which mandates conservation of energy, and states in particular that heat is a form of energy. The second law of thermodynamics, which states that the entropy of the universe always increases, or that perpetual motion machines are impossible. The third law of thermodynamics, which concerns the entropy of an object at absolute zero temperature, and implies that it is impossible to cool a system all the way to exactly absolute zero.
- 3. THE ZEROTH LAW this law expresses that having in existence three systems, a, b, and c, if a is in equilibrium with c and b is in equilibrium with c, then a and b will also be in equilibrium. all three systems will be in equilibrium in temperature. if any of these systems are in contact with other systems, there will be compensation in the temperature level of all the systems involved. that is, they will all have the same temperature. mathematically, we know that, if a= b & a=c then a=b=c thermodynamically, as per the zeroth law, if ta= tb & ta=tc then ta= tb =tc
- 4. INTERNAL ENERGY The internal energy (U) of any object is defined as the sum of all the microscopic kinetic and potential energies of the molecules within the object. It is measured in joules. For example a ruler on a stationary table may have an internal energy of 20000J. An identical ruler on a moving bus at 60 ms-1. When calculating the value of internal energy you must choose an arbitrary zero, this is a randomly chosen starting point in which you consider the potential energy to be zero.
- 5. HEAT It may be defined as energy in transit from a high temperature object to a lower temperature object. An object does not possess heat. The internal energy may be increased by transferring energy to the object from a higher temperature (hotter) object this is called heating.
- 6. WORK When work is done by a thermodynamic system, it is usually a gas that is doing the work. The work done by a gas at constant pressure is W = p dV Where W is work, p is pressure and dV is change in volume. For non-constant pressure, the work can be visualized as the area under the pressure-volume curve which represents the process taking place.