This document summarizes research on additive manufacturing technologies for metal applications. It discusses Sirris, an organization that provides technology services to industry, and their expertise in additive manufacturing. Two key additive manufacturing technologies for metals are described - Electron Beam Melting (EBM) and Laser Beam Melting (LBM). EBM uses an electron beam to sinter metal powder in a vacuum environment, while LBM uses a laser beam under argon gas. Their differences in terms of process parameters, material properties, and advantages/disadvantages are summarized. Metallurgical analysis shows EBM produces a uniform fine-grained microstructure while LBM microstructure depends on build orientation. Mechanical properties are also compared between the two technologies.
Selective Laser Sintering is one of the most used processes of Rapid Prototyping. It is a powder based process where powder of different metals/materials get sintered by LASER.
University Course "Micro and nano systems" for Master Degree in Biomedical Engineering at University of Pisa. Topic: Selective laser sintering, electron beam melting, laser engineering net shaping
Selective Laser Sintering is one of the most used processes of Rapid Prototyping. It is a powder based process where powder of different metals/materials get sintered by LASER.
University Course "Micro and nano systems" for Master Degree in Biomedical Engineering at University of Pisa. Topic: Selective laser sintering, electron beam melting, laser engineering net shaping
this short ppt gives you a rough idea about the additive manufacturing process of stereolithography. This process is apart of 3d printing technologies around us. Also included is link to a video that will help you further.
This presentation is made on the Evolution of Additive Manufacturing. It has a brief description of Additive Manufacturing. It also has a history of Additive Manufacturing, followed by how 3D printing technology was developed and printers were evolved. Also, how it gained media attention and also its application in various fields are covered.
Product Development & Design for Additive Manufacturing (DfAM)Katie Marzocchi
Product Development & DfAM in the Dawn of Digital Transformation
Empire Group provides a glimpse into the future of product development and how an understanding of DfAM is critical to the success of PD professionals and manufacturers alike. You’ll learn some of the basic fundamentals of DfAM and see real-world design examples and optimizations from Empire Group’s Design & Engineering team.
Website: www.empiregroupusa.com
Phone: 508-222-3003
email: info@empirepd.com
Additive Manufacturing (2.008x Lecture Slides)A. John Hart
Slides accompanying 2.008x* video module on Additive Manufacturing, Prof. John Hart, MIT, 2016.
*Fundamentals of Manufacturing Processes on edX: https://www.edx.org/course/fundamentals-manufacturing-processes-mitx-2-008x
this short ppt gives you a rough idea about the additive manufacturing process of stereolithography. This process is apart of 3d printing technologies around us. Also included is link to a video that will help you further.
This presentation is made on the Evolution of Additive Manufacturing. It has a brief description of Additive Manufacturing. It also has a history of Additive Manufacturing, followed by how 3D printing technology was developed and printers were evolved. Also, how it gained media attention and also its application in various fields are covered.
Product Development & Design for Additive Manufacturing (DfAM)Katie Marzocchi
Product Development & DfAM in the Dawn of Digital Transformation
Empire Group provides a glimpse into the future of product development and how an understanding of DfAM is critical to the success of PD professionals and manufacturers alike. You’ll learn some of the basic fundamentals of DfAM and see real-world design examples and optimizations from Empire Group’s Design & Engineering team.
Website: www.empiregroupusa.com
Phone: 508-222-3003
email: info@empirepd.com
Additive Manufacturing (2.008x Lecture Slides)A. John Hart
Slides accompanying 2.008x* video module on Additive Manufacturing, Prof. John Hart, MIT, 2016.
*Fundamentals of Manufacturing Processes on edX: https://www.edx.org/course/fundamentals-manufacturing-processes-mitx-2-008x
3 d printing-for-everyone-from-personnal-to-professional-applications-sirrisSirris
Intellectual property, traceability and the counterfeiting of 3D printable objects
3D printing for everyone - From personal to professional applications
Julien Magnien - Sirris
Atomic Layer Deposition solutions for SiC Power ElectronicsBeneq
Power Electronics International
Brussels, Belgium
19.04.2023
Atomic Layer Deposition solutions for SiC Power Electronics
Integrated ALD passivation/gate dielectric stack for SiC MOSFET
Presented by Mikko Söderlund from Beneq Oy
4. Sirris | Driving industry by technology
130 experts & hight-tech infrastructure
Collective centre
of the technology industry
• Non profit organization
• Industry owned
4,700 industrial interventions
(advice, projects, services)
•within 1,700 different companies
•whose 75% are SME’s
•24M EUR turnover
Mission: “Increase the competitiveness of
companies of the Agoria sectors through
technological innovations”