This document summarizes rare earth doped fibers. It discusses that rare earth doped fibers have ions like neodymium, erbium, or holmium incorporated into the glass core, which yields high absorption and low loss. It then discusses common rare earth ions used, including their host glasses and emission wavelengths. Finally, it discusses different waveguide designs for rare earth doped fibers, including core-confined, double-clad, and evanescent field designs. It aims to review rare earth doped fibers, their types, waveguide designs, and characterization.
Laser and its applications by A Youth PhysicistMasuma Akhatar
Here we are introducing PPT on Laser and its Applications for students whose are appearing for MSC Physics, Bsc. Physics, IIT JEE, Class XII.
For more info and downloads kindly visit to our forum www.ayouthphysicist.tk
you can also visit our YouTube channel www.youtube,com/c/ayouthphysicist
Please like share & subscribe our channel.
Laser and its applications by A Youth PhysicistMasuma Akhatar
Here we are introducing PPT on Laser and its Applications for students whose are appearing for MSC Physics, Bsc. Physics, IIT JEE, Class XII.
For more info and downloads kindly visit to our forum www.ayouthphysicist.tk
you can also visit our YouTube channel www.youtube,com/c/ayouthphysicist
Please like share & subscribe our channel.
Lens antenna is a microwave antenna in which a dielectric lens is placed in front of the dipole or horn radiator to concentrate the radiated energy into a narrow beam or to focus received energy on the receiving dipole or horn.
This ppt give an idea about what metamaterial is? how are they formed? and introduces to the techniques to analyze them. A few applications of metamaterials are also mentioned.
Ayar Labs TeraPHY: A Chiplet Technology for Low-Power, High-Bandwidth In-Pack...inside-BigData.com
Today at Hot Chips 2019, Intel engineers presented technical details on hybrid chip packaging technology, Intel Optane DC persistent memory and chiplet technology for optical I/O.
"To get to a future state of ‘AI everywhere,’ we’ll need to address the crush of data being generated and ensure enterprises are empowered to make efficient use of their data, processing it where it’s collected when it makes sense and making smarter use of their upstream resources," said Naveen Rao, Intel vice president and GM, Artificial Intelligence Products Group. "Data centers and the cloud need to have access to performant and scalable general purpose computing and specialized acceleration for complex AI applications. In this future vision of AI everywhere, a holistic approach is needed—from hardware to software to applications.”
Learn more: https://www.intel.ai/accelerating-for-ai/?elq_cid=1192980
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
SUBSTRATE INTEGRATED WAVEGUIDE BASED ANTENNA AND ARRAY ----REVIEWVIT VELLORE
This study aims to provide an overview and
deployment of Substrate-Integrated Waveguide (SIW) based
antenna and arrays, with different configurations, feeding
mechanisms, and performances. Their performance
improvement methods, including bandwidth enhancement, size
reduction, and gain improvement are also discussed based on
available literature. SIW technology, which acts as a bridge
between planar and non-planar technology, is a very favorable
candidate for the development of components operating at
microwave and millimeter wave band. Due to this, SIW antennas
and array take the advantages of both classical metallic
waveguide, which includes high gain, high power capacity, low
cross polarization, and high selectivity, and that of planar
antennas which comprises low profile, light weight, low
fabrication cost, conformability to planar or bent surfaces, and
easy integration with planar circuits.
Index Terms—SIW; Vias; Antenna and Arrays; CRLH; CBA;
LWA; Horn Antenna.
Ion implantation is used in semiconductor device fabrication and in metal finishing, as well as in material science research.
it is a low temperature process that includes the acceleration of ions of a particular element towards a target, altering the chemical and physical properties of the target.
Artificial intelligence in the design of microstrip antennaRaj Kumar Thenua
This work presents a Neural Network model for the design of Microstrip Antenna for a desired frequency between 3.5 GHz to 5.5 GHz. The results obtained from the proposed method are compared with the results of IE3D and are found to be in good agreement. The advantage of the proposed method lies with the fact that the various parameters required for the design of specific Microstrip antenna at a particular frequency of interest can be easily extracted without going into the rigorous time consuming, iterative design procedures using a costly software package. In this work, a general design procedure is suggested for the Microstrip antennas using artificial neural networks and this is demonstrated using the rectangular patch geometry.
Presentation of PhD Thesis: "A perspective on metasurfaces, circuits, holograms and invisibility". Carlo Andrea Gonano, Politecnico di Milano, Italy, 26 January 2016.
DPS material
DNG material ( Do not depend on the chemical composition, Depend on the geometry of the structure units, Metamaterials are artificial engineered composite structures, Not commonly found in nature)
MNG material
ENG material
The attached narrated power point presentation describes the principle of working, various configurations, advantages, disadvantages and applications of Erbium Doped Fiber Amplifiers. The material will be useful to KTU final year B tech students who prepare for the subject EC 405, Optical Communications.
Etching
In order to form a functional MEMS structure on a substrate, it is necessary to etch the thin films previously deposited and/or the substrate itself. In general, there are two classes of etching processes:
Wet etching where the material is dissolved when immersed in a chemical solution
Dry etching where the material is sputtered or dissolved using reactive ions or a vapour phase etchant
Lens antenna is a microwave antenna in which a dielectric lens is placed in front of the dipole or horn radiator to concentrate the radiated energy into a narrow beam or to focus received energy on the receiving dipole or horn.
This ppt give an idea about what metamaterial is? how are they formed? and introduces to the techniques to analyze them. A few applications of metamaterials are also mentioned.
Ayar Labs TeraPHY: A Chiplet Technology for Low-Power, High-Bandwidth In-Pack...inside-BigData.com
Today at Hot Chips 2019, Intel engineers presented technical details on hybrid chip packaging technology, Intel Optane DC persistent memory and chiplet technology for optical I/O.
"To get to a future state of ‘AI everywhere,’ we’ll need to address the crush of data being generated and ensure enterprises are empowered to make efficient use of their data, processing it where it’s collected when it makes sense and making smarter use of their upstream resources," said Naveen Rao, Intel vice president and GM, Artificial Intelligence Products Group. "Data centers and the cloud need to have access to performant and scalable general purpose computing and specialized acceleration for complex AI applications. In this future vision of AI everywhere, a holistic approach is needed—from hardware to software to applications.”
Learn more: https://www.intel.ai/accelerating-for-ai/?elq_cid=1192980
Sign up for our insideHPC Newsletter: http://insidehpc.com/newsletter
SUBSTRATE INTEGRATED WAVEGUIDE BASED ANTENNA AND ARRAY ----REVIEWVIT VELLORE
This study aims to provide an overview and
deployment of Substrate-Integrated Waveguide (SIW) based
antenna and arrays, with different configurations, feeding
mechanisms, and performances. Their performance
improvement methods, including bandwidth enhancement, size
reduction, and gain improvement are also discussed based on
available literature. SIW technology, which acts as a bridge
between planar and non-planar technology, is a very favorable
candidate for the development of components operating at
microwave and millimeter wave band. Due to this, SIW antennas
and array take the advantages of both classical metallic
waveguide, which includes high gain, high power capacity, low
cross polarization, and high selectivity, and that of planar
antennas which comprises low profile, light weight, low
fabrication cost, conformability to planar or bent surfaces, and
easy integration with planar circuits.
Index Terms—SIW; Vias; Antenna and Arrays; CRLH; CBA;
LWA; Horn Antenna.
Ion implantation is used in semiconductor device fabrication and in metal finishing, as well as in material science research.
it is a low temperature process that includes the acceleration of ions of a particular element towards a target, altering the chemical and physical properties of the target.
Artificial intelligence in the design of microstrip antennaRaj Kumar Thenua
This work presents a Neural Network model for the design of Microstrip Antenna for a desired frequency between 3.5 GHz to 5.5 GHz. The results obtained from the proposed method are compared with the results of IE3D and are found to be in good agreement. The advantage of the proposed method lies with the fact that the various parameters required for the design of specific Microstrip antenna at a particular frequency of interest can be easily extracted without going into the rigorous time consuming, iterative design procedures using a costly software package. In this work, a general design procedure is suggested for the Microstrip antennas using artificial neural networks and this is demonstrated using the rectangular patch geometry.
Presentation of PhD Thesis: "A perspective on metasurfaces, circuits, holograms and invisibility". Carlo Andrea Gonano, Politecnico di Milano, Italy, 26 January 2016.
DPS material
DNG material ( Do not depend on the chemical composition, Depend on the geometry of the structure units, Metamaterials are artificial engineered composite structures, Not commonly found in nature)
MNG material
ENG material
The attached narrated power point presentation describes the principle of working, various configurations, advantages, disadvantages and applications of Erbium Doped Fiber Amplifiers. The material will be useful to KTU final year B tech students who prepare for the subject EC 405, Optical Communications.
Etching
In order to form a functional MEMS structure on a substrate, it is necessary to etch the thin films previously deposited and/or the substrate itself. In general, there are two classes of etching processes:
Wet etching where the material is dissolved when immersed in a chemical solution
Dry etching where the material is sputtered or dissolved using reactive ions or a vapour phase etchant
What's inside all those electronics and tech products you buy? Often, they're filled with toxic chemicals and rare earth minerals. This presentation addresses the history, and global demand for rare earth minerals, and the public and environmental health issues they cause.
The rare earth elements (REE) are fifteen elements with atomic numbers 57 through 71, from lanthanum to lutetium (“lanthanides”), plus yttrium (39), which is chemically similar to the lanthanide elements and thus typically included with the rare earth elements. Although industrial demand for these elements is relatively small in tonnage terms, they are essential for a diverse and expanding array of high-technology applications.
REE-containing magnets, metal alloys for batteries and light-weight structures, and phosphors are essential for many current and emerging alternative energy technologies, such as electric vehicles, energy-efficient lighting, and wind power. REE are also critical for a number of key defense systems and other advanced materials.....
GOOGLE GLΛSS By Google X and Google.inc (PowerPoint Presentation)Mujeeb Rehman
Google Glass (styled "GLΛSS") is a wearable computer with an optical head-mounted display (OHMD) that is being developed by Google in the Project Glass research and development project, with a mission of producing a mass-market ubiquitous computer. Google Glass displays information in a smartphone-like hands-free format,[8] that can communicate with the Internet via natural language voice commands.
Glass is being developed by Google X, which has worked on other futuristic technologies such as driverless cars. The project was announced on Google+ by Project Glass lead Babak Parviz, an electrical engineer who has also worked on putting displays into contact lenses; Steve Lee, a product manager and "geolocation specialist"; and Sebastian Thrun, who developed Udacity as well as worked on the autonomous car project. Google has patented the design of Project Glass.
Extraction and Applications of Rare Earth Metals and Alloys (Uranium, Lithium...Ajjay Kumar Gupta
Metals & Alloys is a primary source of the lanthanide rare earth metals (including yttrium and scandium) and of rare earth metal alloys. The oxides produced from processing rare earths are collectively referred to as rare earth oxides. Although rare earths are relatively common in the earth’s crust, they often do not occur in high enough concentrations, or occur along with high levels of radioactive elements to make their extraction economic.
See more
http://goo.gl/eWiKDC
http://goo.gl/NinsU1
http://www.entrepreneurindia.co/
Tags
Applications of Rare Earth Metals and Alloys, Beryllium, Best small and cottage scale industries, Boron, Business guidance for Rare earth metals and alloys processing, Business Plan for a Startup Business, Cadmium, Chromium, Extraction and Applications of Rare Earth Metals and Alloys, Extraction of Rare Earth Metals and Alloys, How to Start a Rare earth metals and alloys Business, How to Start a Rare earth metals and alloys extraction?, How to start a successful Rare earth metals and alloys extraction, How to start rare earth alloys Processing Industry in India, How to start rare earth metals Processing Industry in India, Industrial Uses of Rare Earths metals and alloys, Lithium, Magnesium Alloys with Rare-Earth Metal, Magnetic Properties of Rare‐Earth Metals and Alloys, Manganese, Molybdenum, Most Profitable Rare earth metals and alloys Processing Business Ideas, New small scale ideas in Rare earth metals and alloys processing industry, Platinum Metals, Preparation of Rare Earth Metals and Alloys, Profitable small and cottage scale industries, Profitable Small Scale Rare earth metals and alloys extraction, Project for startups, Properties of Rare Earth Metals and Alloys, Rare Earth Alloys, Rare Earth Elements - Metals, Minerals, Mining, Uses, Rare earth elements (REE): industrial technology, Rare Earth Elements Applications, Rare earth elements properties, Rare earth elements separation process, Rare Earth elements, Rare earth extraction process, Rare Earth Industry, Rare earth metals and alloy extraction process, Rare earth metals and alloys Based Profitable Projects, Rare earth metals and alloys Based Small Scale Industries Projects, Rare earth metals and alloys extraction Business, Rare earth metals and alloys Processing Industry in India, Rare earth metals and alloys Processing Projects, Rare Earth Metals and Alloys, Rare earth metals India, Rare Earth Metals Production and Alloys with Properties, Rare earth metals uses, Rare Earth Metals, Rare Earth Resources, Rare minerals list, Selenium, Setting up and opening your Rare earth metals and alloys Business, Silicon, Small Scale Rare earth metals and alloys Processing Projects, Small scale Rare earth metals and alloys production line, Small Start-up Business Project, Starting a Rare earth metals and alloys Processing Business, Start-up Business Plan for Rare earth metals and alloys processing
STUDIED ON A MULTICLADDED ERBIUM DOPED DISPERSION COMPENSATING FIBER AMPLIFIERcscpconf
Erbium doped fiber amplifiers (EDFAs) are the essential components of a highly efficient, long distance optical data link.Their design has been refined to give better performance parameters.A novel design approach for erbium-doped fiber amplifiers is proposed based on Matlab and Fortran 77 Programming.In this paper, a combination of fiber intensity distribution, pump and signal power, optimum length and maximum gain are taken into account as objective function
and the results are presented for different core radius, fiber length, pump power and signal power. Dispersion compensating fibers (DCFs) which possess negative dispersion coefficient
equal to or greater than this 17ps/km-nm can be used to overcome this drawback. In order to upgrade the present long haul fiber optic communication system, comprising of CSFs, a
combination of EDFAs and DCFs would be the most feasible choice to compensate the dispersion as well as the loss.
A novel C+ L band erbium doped fiber broadband light so urce w ith hig h power was introduced. In the ex periment, a fiber loop mirr or made fr om 3 dB coupler was employed, mean while, power controlling circuit made fiber output steady. Single stage fiber and two pump LDs of 980 nm was used, and C band amplified spontaneous emission of backw ard again enhanced the efficiency of LD and stability o f output of fiber. Mean while, selecting appropriate Erbium doped fiber length simultaneously g ot output of C+ L band with power higher than 26.67 mW ( 14.26 dBm) , whose average wavelength was 1 550.887 nm.
A novel C+ L band erbium doped fiber broadband light so urce w ith hig h power was introduced. In the ex periment, a fiber loop mirr or made fr om 3 dB coupler was employed, mean while, power controlling circuit made fiber output steady. Single stage fiber and two pump LDs of 980 nm was used, and C band amplified spontaneous emission of backw ard again enhanced the efficiency of LD and stability o f output of fiber. Mean while, selecting appropriate Erbium doped fiber length simultaneously g ot output of C+ L band with power higher than 26.67 mW ( 14.26 dBm) , whose average wavelength was 1 550.887 nm.
1. 1
Rare Earth Doped Fibers
Pritesh Desai - 10BEC128, Frenil Shah - 10BEC129
Department of Electronics and Communication Engineering,
Institute of Technology, Nirma University.
Abstract— The use of rare earth doped fibers has been (EDFA) and ytterbium-doped fibers for high-power fiber
extensive in the fast developing world and has been a topic of lasers and amplifiers.
constant research. This term paper reviews what are earth doped
fibers, their common types, wave guide designs and TABLE 1
characterization. It also describes the fabrication of these fibers The most common laser-active ions and host glasses and also typical
through various processes and gives a brief introduction on earth emission wavelength ranges of rare-earth-doped fibers
doped fiber amplifiers
I. INTRODUCTION
R are-earth doped fiber is an optical fiber in which ions of a
rare-earth element, such as neodymium, Erbium or
holmium, have been incorporated into the glass core
matrix, yielding high absorption with low loss in the visible
and near-infrared spectral regions.
Fiber lasers and fiber amplifiers are nearly always based on
glass fibers which are doped with laser-active rare earth ions
(normally only in the fiber core). These ions absorb pump
light, typically at a shorter wavelength than the laser or
amplifier wavelength (except in up-conversion lasers), which
excites them into some meta-stable levels. This allows for
light amplification via stimulated emission. Such fibers are
often called active fibers. They are gain media with
particularly high gain efficiency, resulting mainly from the
strong optical confinement in the fiber’s waveguide structure.
II. RARE EARTH IONS
The solubility of the rare earth dopant is affected by the
Rare earth ions are good candidate for active ions in laser glass host composition, which, in turn, may affect the
materials because they show many absorption and fluorescence lifetime, absorption, emission, and excited state
fluorescence transitions in almost every region of the visible absorption cross sections of the dopant transitions. These
and the near-infrared range. quantities affect the ultimate ability of the active material to
Rare earths have other important characteristics in provide gain.
comparison to other optically active ions as well: the Devices of general interest span have rare earth
wavelengths of their emission and absorption transitions are concentrations of tens to several thousand parts per million
relatively insensitive to host materials, the lifetimes of meta- (ppm), resulting in devices of one to tens of meters long. For
stable states are long and the quantum efficiency tends to be some applications dopant levels of 1 ppm and less are
high. These properties lead to an excellent performance of rare advantageous, resulting in devices several kilometres long.
earth ions in many optical applications For maximum gain per unit pump power, the rare earth
should ideally be confined as a delta function in the center of
III. COMMON TYPES OF RARE EARTH DOPED FIBERS the core for all designs. Practically, there is a necessary trade-
off between the confinement and the rare earth concentration.
The technologically most important rare-earth-doped fibers The more confined structures require a higher rare earth
are erbium – doped fibers for erbium-doped fiber amplifiers concentration for an equivalent length, eventually running into
the clustering limit for the particular host glass composition.
2. .
Clustering should be avoided as it induces fluorescence
quenching and reduces the performance of the device.
IV. WAVEGUIDE DESIGNS
Let us consider the waveguide configurations used to bring Fig 1. Launching of Pump Light in Undoped Cladding
the pump, signal, and active media together. The most widely
used configuration consists of a rare earth doped fiber core, The guiding geometry of this configuration was designed to
which allows the pump and signal to propagate together in a maximize the use of power available from laser diode arrays,
single mode fiber; there are a number of alternative fiber thereby producing higher-output powers.
device geometries worthy of consideration too.
C. Evanescent Field
A. Core Confined The wings or evanescent field of the optical signal guided
In this type of waveguide design, both pump and signal by a single mode fiber may be used to interact with an active
are confined in the fiber core for the most efficient conversion material outside of the core region. If the guide is tapered then
of pump to signal photons. The most important features of this this effect can be enhanced thereby causing the optical power
configuration is availability of commercial, low insertion loss, to increase outside the material bounds of the fiber over the
low-reflectivity fiber couplers, which can be chosen to length of several millimeters.
combine a variety of pump and signal wavelengths onto a Similarly, the active media can be incorporated in the
common output fiber. cladding glass. Reported gain for an erbium-doped cladding
For this design, the launched pump threshold power structure was 0.6 dB for a 1.55 um signal, with a 1.48 um
Pth provides a reasonable figure of merit for the efficiency of a pump power of 50 mW.
fiber laser or amplifier, a lower value being preferred. This The evanescent field may also be accessed by polishing
quantity is proportional to away a portion of the fiber cladding, thus creating a structure
similar to a D-shaped fiber. Pulsed amplification of 22 dB for
(1) one such dye evanescent amplifier has been achieved
To obtain a sizable gain, the pump power required for these
devices exceeds that needed for schemes in which the active
where, media are contained in the core. With the help of evanescent
Aeff = effective core area interaction, active media such as dyes can be explored that
εp = fractional absorbed pump power cannot be incorporated into a glass.
σe = stimulated emission cross-section
τf = pump fluorescence lifetime VI. CHARACTERIZATION OF RARE EARTH DOPED FIBERS
The efficiency of this device, therefore, can be increased by In addition to all the properties of a passive (undoped)
diminishing the effective core area, increasing the pump optical fiber, such as the guiding properties (effective mode
absorption cross section, increasing the pump fluorescence area, numerical aperture, cut-off wavelength, and bend losses),
lifetime, and increasing the stimulated emission cross section. nonlinearities, etc., active fibers can be characterized with
The greatest effect on increasing the gain/pump power slope respect to several other properties:
is observed by decreasing the mode field diameter (decreasing One of the most important parameters is the rare-earth
Aeff) . Further improvement can be achieved by confining the doping concentration, most often specified in ppm wt (parts
rare earth to the central portion of the core, where the pump per million by weight). A higher doping concentration allows
and signal intensities are generally highest. for efficient pump absorption in a shorter length and thus also
The optimized waveguide design then requires reduces the effect of nonlinearities in high peak power
consideration of both the device configuration and a number devices. However, it can also lead to concentration quenching.
of material and waveguide properties determined by the Wavelength-dependent effective absorption and emission
fabrication methods used. cross sections (and possibly ESA cross sections) together with
the upper-state lifetime (and possibly lifetimes of intermediate
B. Double Clad levels) are required for calculating the wavelength tuning
Another approach to achieve interaction of guided pump behaviour, power efficiency, etc. Parameters for quantifying
light with an active medium, uses a single-mode guide or the the speed of energy transfer processes are important
signal surrounded by a multimode pump guide. Pump light is particularly for co-doped fibers.
launched from the fiber end into the undoped cladding, As an alternative method, Giles parameters can be
propagating in a zigzag pattern through the doped core as it specified, which depend on the doping concentration, effective
travels along the fiber. A high brightness neodymium fiber mode area and effective cross sections.
laser based on the latter design provide an output greater than For such characterization, a variety of measurement
100 mW for an 807 nm diode array laser pump power of 500 techniques are used. White-light absorption spectra can be
mW used for finding absorption cross sections (for known doping
3. 3
concentrations). Emission cross sections are obtained from VIII. RARE EARTH DOPED FIBER FABRICATION METHODS
fluorescence spectra, with scaling e.g. via the reciprocity
method or the meta-stable level lifetimes. Upper-state A. Low-Loss Communication Fiber
lifetimes are often obtained from fluorescence measurements
with pulsed pumping, and ESA parameters can be obtained in The standard method of fabricating doped silica fiber fall
experiments with a modulated pump power. into two basic categories, both based on the reaction of
The resulting set of data can be used e.g. in laser and halides, such as SiCl4, GeCl4, POCl3, SiF4, and BCl3, to form
amplifier models based on rate equations. Such models allow the desired mix of oxides.
one, e.g. to predict or check the performance of fiber laser or Category 1 reacts the chlorides in a hydrogen flame and
amplifier devices, the effect of possible modifications etc. collects the resulting soot on a mandrel for subsequent
Further characterization may be required for quantifying sintering to a transparent glass. Processes based on this
effects such as photo darkening, which can sometimes method are commonly referred to as vapor axial deposition
seriously degrade the efficiency of active fiber devices. (VAD) and outside vapor deposition (OVD).
Category 2 reacts the chlorides inside a substrate tube that
VII. RARE-EARTH-DOPED FIBER AMPLIFIERS becomes part of the cladding, simultaneously reacting,
depositing, or sintering as a torch plasma fireball or
With the development of fibers that amplify light through microwave cavity traverses the tube. Processes based on this
stimulated emission, a new fiber technology came into method are commonly referred to as modified chemical vapor
existence. Due to it, channel capacities of the fiber deposition (MCVD), plasma chemical vapor deposition
communication increased. (PCVD), and intrinsic microwave chemical vapor deposition
Such fibers are made by incorporating various rare-earth ion (IMCVD).
dopants into the core material, the most successful of which All these methods create a preform, or large-geometry
has been erbium. Erbium-doped fiber amplifiers (EDFAs) in equivalent, which is desired in the fiber. The preform is then
their usual configuration provide gain that maximizes at 1.53 drawn into an optical fiber by heating one end to the softening
um when the fiber is pumped by additional light input at either temperature and pulling it into a fiber at rates of 1-10 m/s.
1.48 or 0.98 um wavelength. Lengths of amplifying fibers are Index-raising dopant ions, such as germanium, phosphorus,
used as repeater sections in communications systems, aluminium, and titanium, and index-lowering dopants such as
replacing the expensive and complicated electronic units that boron and fluorine, are introduced into the reaction stream as
were commonly used. halide vapors carried by oxygen at a temperature near 30°C.
The main advantage of using a fiber amplifier repeater is The halide compounds of rare earth ions are, however,
that the transmitted signal will remain in optical form generally less volatile than the commonly used chlorides and
throughout the link rather than being transformed into an fluorides of the index-modifying dopants, thereby requiring
electrical signal and back to optical signal whenever a repeater volatilizing and delivering temperatures of a few hundred
stage is encountered. System data rates can also be changed as degrees.
per need or simultaneously multiple data rates can be
transmitted without the need to modify the transmission span.
A single EDFA can provide gain for multiple wavelengths
simultaneously. Such a task would otherwise require a
separate electronic repeater for each wavelength. It is this
feature that contributed to the realization of dense wavelength
division multiplexed (DWDM) systems. For example, 80
wavelength channels having 50 GHz spacing can be
accommodated within the conventional 1.53 to 1.56 um EDFA
gain bandwidth. More recent efforts have resulted in the
extension of EDFA gain into the longer wavelength (L band)
range between 1.56 and 1.63 um.
Other rare-earth dopants or dopant combinations have been
used to produce fiber amplifiers that pose gain at other
wavelengths in the visible and near-infrared. Examples of
these include praseodymium-doped fiber amplifiers (PDFAs),
which provide gain at 1.3 um and are pumped at 1.02 um.
Ytterbium-doped fibers (YDFAs) amplify from 975 to 1150
nm using pump wavelengths between 910 and 1064 nm;
Fig 2. Vapor pressures of reactant halides, including index-
erbium-ytterbium co-doped fibers (EYDFAs) enable use of raising ions and a representative rare earth ion, Er
pump light at 1.06 um while providing gain at 1.55 um.
Thulium-doped fluoride fibers (TDFAs) have been
constructed for amplification at 0.8 um and 1.48 um.
4. B. Rod and Tube
The first optical fiber was made by drawing a preform
assembly made of a core rod and cladding tube of the proper
dimensions and indices. Recent adaptations of this method
have been demonstrated for making compound glass core
compositions. To retain the overall compatibility with
communication-grade doped silica fiber, a small compound
glass rod is inserted into a thick-walled silica tube. The
combination is then drawn at the high temperatures required
by the silica tube. As a result, a few of the less stable
constituents of the compound glass are volatilized. In spite of
this, lengths of fiber can be drawn that are long enough for
practical use.
With interest in distributed Er-doped amplifiers, a need
arose for a method to produce uniform and very low dopant
levels. Although the solution doping and outside process
methods were successful in controlling these low levels of
dopant, a new, rod-and-tube like technique was also devised to
meet this challenge. Here rare earth was introduced into an
MCVD preform as the core of a fiber with a 150 um outside Fig 3. Seed fiber doping of MCVD
diameter and a 10 um core diameter (see the figure below).
The “seed” fiber was inserted in the bore of an MCVD
preform before the last collapse pass. During the final collapse REFERENCES
pass, the fiber becomes a diffusion source for the dopant ions [1] T. Setsuhisa, “Development of Rare Earth-doped fiber
in the center of the preform core. amplifiers”, IPAP books 2 (2005) pp. 101–112.
Fibers fabricated by this method have shown losses as low [2] Chu, Pak Lim,” Nonlinear effects in rare-earth-doped fibers and
as 0.35 dB/km and well-controlled erbium levels of 0.01 ppm waveguides”.
Er3+, corresponding to a ground-state absorption level of only [3] Urquhart, Paul,” Review of rare earth doped fibre lasers and
amplifiers”.
1 dB/km at 1.53 um. Ina sense this resembles a miniature rod-
[4] Agrawal, Nonlinear Fiber Optics (Second Edition), California,
and-tube process except that the rod is effectively dissolved in USA.
the host core, as evidenced by the change in fluorescence [5] Digonnet, Rare-Earth-Doped Fiber Lasers and Amplifiers
spectrum from the seed composition to the core composition. (Second Edition), New York, USA.
[6] Rare Earth Doped Fibers, http://www.fiberforsale.com, 14-03-
2013