The document discusses transformers, which transfer electrical energy between two AC circuits by electromagnetic induction. Transformers reduce or increase voltage levels for transmission and use. They work by inducing voltage in a secondary winding through a changing magnetic flux produced by a primary winding. No direct electrical contact exists between windings. Transformers cannot operate on DC, as DC flux is constant rather than alternating. Core and shell types differ in winding and core arrangements. Transformers are used to change voltage levels for power transmission and distribution and for measurement applications.
DC motors
Torque & Speed Equations
Torque -Armature current Characteristics
Speed - Armature current Characteristics
Torque-speed characteristics
Applications
Speed Control
Townsend ’s theory
Introduction
Ionization by collision
Townsend’s current growth equation
Current Growth in the Presence of Secondary Processes
Townsend’s secondary ionization coefficient
Townsend’s Criterion for Breakdown
Breakdown in Electronegative Gases
i have made a presentation on welding and welding transformer, here i included types of weldings and their advantages and types of welding transformer and their working, construction, application, advantages..
DC motors
Torque & Speed Equations
Torque -Armature current Characteristics
Speed - Armature current Characteristics
Torque-speed characteristics
Applications
Speed Control
Townsend ’s theory
Introduction
Ionization by collision
Townsend’s current growth equation
Current Growth in the Presence of Secondary Processes
Townsend’s secondary ionization coefficient
Townsend’s Criterion for Breakdown
Breakdown in Electronegative Gases
i have made a presentation on welding and welding transformer, here i included types of weldings and their advantages and types of welding transformer and their working, construction, application, advantages..
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
1. INTRODUCTION
The transformer is a static device which is used to
transfer electrical energy from one ac circuit to another
ac circuit.
Input to a transformer and output from a transformer
both are alternating quantities (AC).
Electrical energy is generated and transmitted at an
extremely high voltages. The voltage is to be then
reduced to a lower value for its domestic and industrial
use.
This is done by using a transformer.
2. The power transmission system using transformers is
shown in figure.
When the transformer changes the voltage level, it
changes the current level also.
3. Basic Principle
The primary winding is connected to the single –
phase ac supply, an ac current starts flowing through
it.
4. The ac primary current produces an alternating flux
(Ф) in the core.
Most of this changing flux gets linked with the
secondary winding through the core.
The varying flux will induce voltage into the secondary
winding according to the faraday’s laws of
electromagnetic induction.
Voltage level change but frequency i.e. time period
remains same.
There is no electrical contact between the two
winding, an electrical energy gets transferred from
primary to the secondary.
5. A simple transformer consists of two electrical
conductors called the primary winding and the
secondary winding.
Energy is coupled between the windings by the time
varying magnetic flux that passes through( links) both
primary and secondary windings.
6. Can the transformer operate on
DC?
Answer: NO
The transformer action does not take place with a
direct current of constant magnitude.
Because with a DC primary current, the flux produced
in the core is not alternating but it is of constant value.
As there is no change in the flux linkage with the
secondary winding, the induced emf in the secondary
is zero.
7. If DC is applied to the primary then there is a
possibility of transformer core saturation.
If core saturates the primary will draw excessively large
current. Therefore application of DC should be
avoided.
8. Transformer Types
The transformer are of different types depending on
the arrangement of the core and the winding as
follows.
Core Type
Shell Type
Berry Type
The magnetic core is a stack of thin silicon-steel
laminations about 0.35 mm thick for 50 Hz
transformer. In order to reduce the eddy current losses,
these laminations are insulated from one another by
thin layers of varnish.
11. Sr.
No
Core Type Transformer Shell Type Transformer
1. The core has only one
window.
The core has two windows.
2. Winding encircles the
core.
Core encircles the windings.
3. Cylindrical windings are
used.
Sandwich type windings are
used.
4. Easy to repair. It is not so easy to repair.
5. Better cooling since
more surface is exposed
to the atmosphere.
Cooling is not very effective.
12. Construction of Transformer
The Most important parts of a transformer are the
windings (coils) and the core.
Some other parts such as suitable tank, conservator,
bushings, breather, explosion vent etc. are also used
along with the core and windings.
13. Applications
Step – up and Step – down Voltage
Measurement of current in single and three phase
system
Measurement of voltage in single and three phase
system
Measurement of power
Measurement of Energy