1. The document discusses mechanisms of substitution reactions in coordination compounds, including dissociative, associative, and interchange mechanisms. It provides details on the steps and intermediates involved in each.
2. Factors that affect the rates of substitution reactions are also examined, such as temperature, pressure, ionic strength, and solvent. The relationships between these factors and reaction rates are defined.
3. Dissociative and associative mechanisms are described for the replacement of coordinated water by other ligands in octahedral metal complexes. Evidence suggests dissociative (SN1-like) processes are often involved when the rate depends only on the metal complex concentration.
THE PERICYCLIC REACTION THE MOST COMMON TOPIC INCLUDE THE SYLLABUS OF MANY SCIENCE STUDY INCLUDING BSC, MSC , PHARMA STUDY, AND MORE HENCE WE ARE COVERED ALL THE DATA OF IT HOPE THIS WILL MAKE READER EASY.
THE PERICYCLIC REACTION THE MOST COMMON TOPIC INCLUDE THE SYLLABUS OF MANY SCIENCE STUDY INCLUDING BSC, MSC , PHARMA STUDY, AND MORE HENCE WE ARE COVERED ALL THE DATA OF IT HOPE THIS WILL MAKE READER EASY.
Theories of coordination compounds, CFSE, Bonding in octahedral and tetrahedral complex, color of transition metal complex, magnetic properties, selection rules, Nephelxeuatic effect, angular overlap model
Labile & inert and substitution reactions in octahedral complexesEinstein kannan
The first part includes a definition of labile and inert. lability and inertness on the basis of VB theory and CFT and also factors affecting inertness and lability of the complexes.
And also the second part includes Substitution Reactions in Octahedral Complexes like mechanisms and their evidence.
more chemistry contents are available
1. pdf file on Termmate: https://www.termmate.com/rabia.aziz
2. YouTube: https://www.youtube.com/channel/UCKxWnNdskGHnZFS0h1QRTEA
3. Facebook: https://web.facebook.com/Chemist.Rabia.Aziz/
4. Blogger: https://chemistry-academy.blogspot.com/
Organic Synthesis:
The Disconnection Approach
One Group C-C Disconnection of Alcohol and Alkene
more chemistry contents are available
1. pdf file on Termmate: https://www.termmate.com/rabia.aziz
2. YouTube: https://www.youtube.com/channel/UCKxWnNdskGHnZFS0h1QRTEA
3. Facebook: https://web.facebook.com/Chemist.Rabia.Aziz/
4. Blogger: https://chemistry-academy.blogspot.com/
Organic Synthesis:
The Disconnection Approach
One Group C-C Disconnection of Alcohol and Alkene
Theories of coordination compounds, CFSE, Bonding in octahedral and tetrahedral complex, color of transition metal complex, magnetic properties, selection rules, Nephelxeuatic effect, angular overlap model
Labile & inert and substitution reactions in octahedral complexesEinstein kannan
The first part includes a definition of labile and inert. lability and inertness on the basis of VB theory and CFT and also factors affecting inertness and lability of the complexes.
And also the second part includes Substitution Reactions in Octahedral Complexes like mechanisms and their evidence.
more chemistry contents are available
1. pdf file on Termmate: https://www.termmate.com/rabia.aziz
2. YouTube: https://www.youtube.com/channel/UCKxWnNdskGHnZFS0h1QRTEA
3. Facebook: https://web.facebook.com/Chemist.Rabia.Aziz/
4. Blogger: https://chemistry-academy.blogspot.com/
Organic Synthesis:
The Disconnection Approach
One Group C-C Disconnection of Alcohol and Alkene
more chemistry contents are available
1. pdf file on Termmate: https://www.termmate.com/rabia.aziz
2. YouTube: https://www.youtube.com/channel/UCKxWnNdskGHnZFS0h1QRTEA
3. Facebook: https://web.facebook.com/Chemist.Rabia.Aziz/
4. Blogger: https://chemistry-academy.blogspot.com/
Organic Synthesis:
The Disconnection Approach
One Group C-C Disconnection of Alcohol and Alkene
Isotopes are two atoms of the same element that have the same number of protons but different numbers of neutrons. Isotopes are specified by the mass number.
lecture slide on:
Gibbs free energy and Nernst Equation, Faradaic Processes and Factors Affecting Rates of Electrode Reactions, Potentials and Thermodynamics of Cells, Kinetics of Electrode Reactions, Kinetic controlled reactions,Essentials of Electrode Reactions,BUTLER-VOLMER MODEL FOR THE ONE-STEP, ONE-ELECTRON PROCESS,Current-overpotential curves for the system, Mass Transfer by Migration And Diffusion,MASS-TRANSFER-CONTROLLED REACTIONS,
Chemical reaction engineering is that engineering activity which is concerned with the exploitation of chemical reactions on commercial scale.
The areas of different fields of science like:
Oil Refining
Pharmaceuticals
Biotechnology
Chemical Industries
Sustainable Development
PPT Describe elimination reactions, Evidences and mechanism of elimination reaction. Energy profile diagram. RELATIVE stabilities of intermediates. Comparison between E1 & E2 elimination reaction
Similar to Octahedral Substitution reaction way.ppt (20)
Phenomena such as fluorescence, phosphorescence must use special teqniques to detect it
Detector must be sensitive
The spectroscopic nature of luminescent radiation using mono chromatic together with a photomultiplier to detection
The column flotation technique and falcon concentratorSciencewithAhmed
The column flotation technique has many advantages such as:
Production of cleaner concentrate.
Lower energy consumption.
Lower capital costs.
Small space.
Wash Water & Froth depth.
Welcome to TechSoup New Member Orientation and Q&A (May 2024).pdfTechSoup
In this webinar you will learn how your organization can access TechSoup's wide variety of product discount and donation programs. From hardware to software, we'll give you a tour of the tools available to help your nonprofit with productivity, collaboration, financial management, donor tracking, security, and more.
The Art Pastor's Guide to Sabbath | Steve ThomasonSteve Thomason
What is the purpose of the Sabbath Law in the Torah. It is interesting to compare how the context of the law shifts from Exodus to Deuteronomy. Who gets to rest, and why?
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
Students, digital devices and success - Andreas Schleicher - 27 May 2024..pptxEduSkills OECD
Andreas Schleicher presents at the OECD webinar ‘Digital devices in schools: detrimental distraction or secret to success?’ on 27 May 2024. The presentation was based on findings from PISA 2022 results and the webinar helped launch the PISA in Focus ‘Managing screen time: How to protect and equip students against distraction’ https://www.oecd-ilibrary.org/education/managing-screen-time_7c225af4-en and the OECD Education Policy Perspective ‘Students, digital devices and success’ can be found here - https://oe.cd/il/5yV
The Indian economy is classified into different sectors to simplify the analysis and understanding of economic activities. For Class 10, it's essential to grasp the sectors of the Indian economy, understand their characteristics, and recognize their importance. This guide will provide detailed notes on the Sectors of the Indian Economy Class 10, using specific long-tail keywords to enhance comprehension.
For more information, visit-www.vavaclasses.com
This is a presentation by Dada Robert in a Your Skill Boost masterclass organised by the Excellence Foundation for South Sudan (EFSS) on Saturday, the 25th and Sunday, the 26th of May 2024.
He discussed the concept of quality improvement, emphasizing its applicability to various aspects of life, including personal, project, and program improvements. He defined quality as doing the right thing at the right time in the right way to achieve the best possible results and discussed the concept of the "gap" between what we know and what we do, and how this gap represents the areas we need to improve. He explained the scientific approach to quality improvement, which involves systematic performance analysis, testing and learning, and implementing change ideas. He also highlighted the importance of client focus and a team approach to quality improvement.
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
CLASS 11 CBSE B.St Project AIDS TO TRADE - INSURANCE
Octahedral Substitution reaction way.ppt
1. 1/10/2024 1
Stability of Coordination Compounds
• The kinetic stability depends on the activation energy (DG‡)
of the ligand substitution reaction, the thermodynamic stability
is given by the free energy change:
2. 1/10/2024 2
Mechanisms for Substitution Reactions
If rate determining step is:
a)breaking bond of leaving group –>
dissociative mechanism (D)
(this mechanism corresponds to the SN1 reaction in
organic chemistry)
b) making bond of entering group –>
associative mechanism (A)
(this mechanism corresponds to the SN2 reaction in
organic chemistry)
c) Interchange (I)
• Both, dissociative and associative reaction
mechanisms involve two-step pathways and an
intermediate:
4. 1/10/2024 4
There are several ways in which a substitution reaction can
take place:
1.Dissociative substitution involves the reversible
dissociation of one ligand to form an intermediate complex
with one fewer ligand followed by the addition another ligand
to the metal.
(a) The rate is first order in MLx and zero order in L'.
(b) The rate doesn't depend on the nucleophilicity of L'.
(c) This is common for octahedral complexes and other
complexes with an 18 electron count.
5. 1/10/2024 5
2-Associative substitution occurs when the incoming
ligand first adds to the complex to form an intermediate
complex with one lignad more than the starting complex
followed by a loss of one ligand.
(a) The rate is first order in MLx and first order in L'.
(b) The rate is directly proportional to the nucleophilicity of
L'.
(c) This is common for square planar complexes and other
complexes with less than an 18 electron count.
6. 1/10/2024 6
3-Interchange substitution is intermediate between the two.
There is no intermediate complex formed. Instead bond
making to the new ligand occurs along with bond breaking to
the original ligand. This is very similar to SN2 substitution in
organic chemistry.
(a) The rate is first order in MLx and zero order in L'.
(b) The rate doesn't depend on the nucleophilicity of L'.
(c) The rate is inversely proportional to the strength of the
M-L (leaving group) bond.
7. 1/10/2024 7
Dissociative: activated state has lower coordination number due to
dissociation of the leaving group
Associative: activated state has a higher coordination number due to
bonding of the incoming group
Rate determining step:
dissociation of X (outgoing group) is slow
Rate determining step:
association of Y (incoming group) is slow
8. 1/10/2024 8
II.1 The Dissociative Mechanism
•In this mechanism the intermediate has a lower
coordination number than the reactant and this
intermediate stabilizes for long enough to equilibrate with
its environment before capturing the entering group.
•The leaving group has left the reaction centre before any
interaction between the metal centre and the entering
group has taken place.
•The rate of the reaction should therefore be insensitive to
the nature and concentration of the entering group but
dependent on the nature of the leaving group.
•Referring to Figure 4, the reaction profile consists of a
single intermediate and two transition states.
10. 1/10/2024 10
II.2 The Associative Mechanism
•In the A mechanism the intermediate has a larger coordination
number than the reactant.
•It can be seen in Figure 5 that in the first transition state
(bond making) the bond with the entering group Y is largely
established before the bond towards the leaving ligand X is
weakened.
•The reaction rate therefore depends strongly on the nature of
the entering ligand Y since it participates in the transition state.
•This reaction profile consists of a single intermediate
(containing the entering and leaving group bonded to the
reaction centre) and two transition states leading to the
formation and decomposition of the intermediate.
11. 1/10/2024 11
(a) the bond-breaking transition state at higher energy (b) the bond-
making transition state at higher energy. the deeper the energy well the
more stable the intermediate will be.
12. 1/10/2024 12
II.3 The Interchange Mechanism
•In this mechanism no detectable intermediate can be
found and there is only a single transition state.
•Here the acts of bond making and breaking are either
synchronous or else take place within a pre-formed
aggregate.
•The incoming group Y and the leaving group X are
interchanged between the inner and outer coordination
spheres of the metal.
•As the entering group approaches the reaction centre the
leaving group departs.
•ID and IA can be considered as extreme border cases of
the I mechanism.
13. 1/10/2024 13
III.Factors Affecting Rates of Reactions
1- Effect of Temperature
The effect of temperature on the rate constant of a reaction (k) is
governed by
Where K is Boltzman`s constant
h is Planck`s constant
DH≠ and DS≠ are the standard enthalpy and entropy of activation,
respectively, and represent the change in enthalpy and entropy
respectively, in the formation of the activated complex (transition
state) from the reactant.
DH≠ is related to the energy required in bringing reactants up to
each other and energy required for reorganization of bonds.
DS≠ measures the degree of disorder on the formation of activated
complex.
If DS≠ is +ve, reaction goes by dissociative mechanism.
If DS≠ is -ve, reaction goes by associative mechanism.
k KT h e e
H RT S R
( / ) / /
D D
14. 1/10/2024 14
2- Effect of External Pressure
The effect of external pressure on the rate of a reaction is
expressed by the relation
Where DV≠ (volume of activation) is the molar volume change
that takes place in the conversion of the reactants to the
activated complex; k2 and k1 are the rate constants at the
pressures P2 and P1 respectively, at a constant temperature, T.
Since DV≠ can have either positive or negative values,
reactions may be accelerated or retarded by increase of
pressure.
DV≠ is diagnostic of the mechanism; as DV≠ is related to DS≠.
For aquatic reactions of octahedral complexes, this following
relationship holds
D D
V S
104 4 4
. .
RT
P
P
V
k
k
T
303
.
2
)
(
)
log( 1
2
1
2
D
15. 1/10/2024 15
3- Effect of ionic strength
According to Debye-Huckel theory, the rate of a
reaction between ions of charge ZA and ZB should vary
with the ionic strength (I) of the solution in the
following manner
Where k1 and ko are the rate constants at ionic strength
I and 0 respectively and the constant Q is proportional
to the solvent dielectric constant.
log log /
k k QZ Z I
o A B
1
1 2
2
16. 1/10/2024 16
4- Influence of Solvent
If the interacting ions have ZA and ZB and they are at a
distance dAB apart in the transition state, then it can be
shown that
Where e is the electronic charge, K the Boltzaman`s
constant, T the absolute temperature, k the rate
constant in a medium of dielectric constant and k is
the value of rate constant in a medium of infinite
dielectric constant.
log log
.
k k
Z Z e
d KT
A B
AB
2
2 303
17. 1/10/2024 17
Kinetic concepts:
Inert complex: An inert complex reacts slowly, even though the
reaction may lead to a more stable, thermodynamically favoured
product.
→ high energy of activation EA
Labile complex: Fast reactions (reaction half-life < 1 min.)
→ low energy of activation EA
• Generally complexes with high LFSE are inert.
Inert and Labile Complexes
Thermodynamic concepts:
Stable complex: Large complex formation
constant
Unstable complex: Small complex
formation constant
e.g. [Cu(OH2)6]+ is stable in water but
unstable against the formation of
[Cu(NH3)4(H2O)2]+ in the presence of NH3
in aqueous solution.
18. 1/10/2024 18
It was assumed that a stable complex is inert and that an unstable
complex is labile. This is not always true, as cyanide ion forms
very stable complexes with metal ions such as Ni2+. The stability
indicates that the equilibrium (1) lies far to the right and that Ni2+
prefers CN- to H2O as a ligand
[Ni(H2O)6]2+ + 4CN- [Ni(CN)4]2- + 6H2O (1)
However, when 14C-labeled cyanide ion is added to the solution, it
is almost instantaneously incorporated into the complex (2). Thus
the stability of this complex does not ensure internees
[Ni(CN)4]2- + 414CN- [Ni(14CN4)]2- + 4CN- (2)
It is important to know that the terms stability and lability relate to
different phenomena. The stability of a complex depends on the
difference in energy between reactants and products
19. 1/10/2024 19
A stable compound will be considerably lower in energy than
possible products. The lability of a compound depends on the
difference in energy between the compound and the activated
complex; i.e., if this activation energy is large, the reaction will be
slow.
Reactants
Energy
Products
Activated complex
Activation energy
Reaction energy
Scheme (2) The relative energies of reactants, activated complex and
products of a reaction
20. 1/10/2024 20
Labile Complexes
1- All complexes in which the central metal atom contains d
electrons in eg orbitals (the dx2-y2 and dz2 orbitals that point
toward the six ligands).
For example:
[Ga(C2O4)3]3-, d10 (t2g
6eg
4); [Co(NH3)6]2+, d7 (t2g
5eg
2);
[Cu(H2O)6]2+, d9 (t2g
6eg
3); [Ni(H2O)6]2+, d8 (t2g
6eg
2);
[Fe(H2O)6]2+, d5 (t2g
3eg
2).
2- All complexes that contain less than three d electrons, for
example,
[Ti(H2O)6]3+, d1; [V(Phen)3]3+, d2; [Ca(EDTA]2-, d0
21. 1/10/2024 21
• For the main group elements, there appears to be a correlation
between the ion size/charge-density and exchange rate:
• For transition metal elements the ion-size/charge density is less
important and the d-electron configuration largely determines the
rate.
• However, trivalent ions still do react more slowly than the
divalent ones.
22. 1/10/2024 22
•The rate behaviour of complexes is affected by charge and size of
their central atoms. Small highly charged ions form complexes that
react slowly. Thus there is a decrease in lability with increasing
charge of the central atom for the isoelectronic series
[AlF6]3- > [SiF6]2- > [PF6]- > SF6
•Similarly, the rate of water exchange (1) decreases with increasing
cationic charge in the order:
[Na(H2O)n]+ > [Mg(H2O)n]2+ > [Al(H2O)n]3+
•Complexes having central atoms with small ionic radii react more
slowly than those having larger central ions, for example
[Mg(H2O)6]2+ < [Ca(H2O)6]2+ < [Sr(H2O)6]2+
•For a series of octahedral metal complexes containing the same
ligands, the complexes having central metal ions with the largest
charge-to-radius ratios will react the slowest.
[M(H2O)6]n+ + 6H2O* [M(H2O*)6]n+ + 6H2O (1)
23. 1/10/2024 23
•In general, four-coordinated complexes (both tetrahedral and
square planar molecules) react more rapidly than analogous six-
coordinated systems. The greater rapidity of reactions of four-
coordinated complexes may be due to the fact that there is enough
room around the central ion for a fifth group to enter the
coordination sphere. The presence of an additional group would aid
in the release of one of the original ligands.
•For square planar complexes it is not possible to apply
successfully the charge-to-radius ratio generalization that works
well for six-coordinated complexes.
•Therefore, the rules that predict rate behaviour for six-coordinated
systems will often not apply to complexes having smaller
coordination numbers. Since rate behaviour is dependent on
mechanism and since reactions of metal complexes are known to
proceed by a variety of paths, it is impossible to make
generalizations that apply to all complexes.
24. 1/10/2024 24
IV. Mechanisms of Octahedral Substitution
Reactions
A)Dissociative Mechanism
Step 1. Dissociation of X to yield a 5 coordinate intermediate
ML5X + Y → [ML5Y] + X (1)
M-X bond is broken Slow and rate determining The rate of D is
only depends on the conc. of ML5X
k1
ML5X → ML5 + X (2)
Trigonal Bipyramidal D3h Square Pyramidal C4h
25. 1/10/2024 25
B)Associative Mechanism
Step 1. Collision of ML5X with Y to yield a 7-coordinate
intermediate. (slow)
k1
ML5X + Y → [ML5XY] (slow, rate determining) (3)
Capped Octahedron Pentagonal Bipyramid
L
L
L
L X
M
Y
L
M
L
L L
Y
X
L
L
26. 1/10/2024 26
IV.2 Replacement of Coordinated Water by other Ligand
The rate of replacement of coordinated water molecule by SO4
2-,
S2O3
2-, EDTA and other species has been measured for a variety of
metal ions (1)
The rates of these reactions are independent on the concentration of
the entering ligand, that is, a first-order rate law. Eq. 2 applies. In
many cases
the rate of reaction (1) for a given metal ion is independent of
whether H2O, SO4
2-, S2O3
2- or EDTA is the entering ligand (L).
This observation and the fact that the rate law does not include the
entering ligand suggest that these reactions occur by a mechanism
in which the slow step is the breaking of a bond between the metal
ion and water. The resulting species would then be expected to
coordinate rapidly with any nearby species.
[ ( ) ] [ ( ) ]
M H O M H O L O (1)
X X
n
2
2
2 1
2
+ L + H
2-
2
Rate k M H O X
n
[ ( )
2 ] (2)
27. 1/10/2024 27
It was found that the more highly charged hydrated metal ions such
as Al3+ and Sc3+ undergo H2O exchange more slowly than M2+
ions. This suggests that bond breaking is important in the rate-
determining step of these reactions. This evidence suggests that
SN1processes are important in substitution reactions of hydrated
metal ions.
IV.3 Replacement of Ligand (or Anion) by Water Molecule
Theses processes are called aquatic reactions. In general, ammonia
or amines coordinated to cobalt(III) are observed to be replaced so
slowly by water that only the replacement of ligands other than
amines is usually considered. The rates of reactions of the type (1)
have been studied and found to be first order in
the cobalt complex (X can be any of a variety of amines). Since in
aqueous solution the concentration of H2O is always about 55.6 M,
the effect of changes in water concentration of the reaction rate can
not be determined.
(1)
X
+
]
)
[Co(NH
H
+
]
)
(
[ -
3
2
5
3
2
2
5
3
OH
O
X
NH
Co
28. 1/10/2024 28
Therefore, the rate law does not tell us whether H2O is involved in
the rate determining step of the reaction. The decision as to whether
these reactions proceed by an SN2 displacement of X by H2O or by
SN1 dissociation followed by addition of water must be made from
the following evidences:
1-The rate of hydrolysis (replacement of one chloride by water) of
trans-[Co(NH3)4Cl2]+ is approximately 103 times faster than that of
[Co(NH3)5Cl]2+. Increased charge on a complex is explained to
strengthen metal-ligand bonds and hence retard metal-ligand bond
cleavage. It is also expected to attract incoming ligands and aid
displacement reactions. Since a decrease in rate is observed as the
charge on the complex increases, a dissociative (SN1) process
seems to operative.
2-Another evidence resulted from the study of the hydrolysis of a
series of complexes related to trans-[Co(en)2Cl2]. In these
complexes the ethylenediamine is replaced by similar diamines in
which H atoms on C replaced by CH3 groups.
29. 1/10/2024 29
The complexes containing the substituted diamines react more rapidly
than the ethylenediamine complex. The replacement of H by CH3
increases the bulk of the ligands, consequently this will make it more
difficult for an attacking ligand to approach the metal atom. This steric
crowding should retard an reaction. By crowding the vicinity of the
metal atom with bulky ligands, one enhances a dissociative process,
since the removal of one ligand reduces the crowdness around the metal.
The increase in rate observed when the more bulky ligands were used is
good evidence for the SN1 mechanism.
IV.4 Replacement of an acido group (X-) in a cobalt(III)
complex with a group other than (H2O)
This reaction is illustrated by (1)
It has been observed that this reaction takes place by initial substitution
by solvent H2O with subsequent replacement of water by the new group
Y (2)
(1)
X
+
]
)
[Co(NH
Y
+
]
)
(
[ -
2
5
3
-
2
5
3
Y
X
NH
Co
[Co(NH3)5X]2+ [Co(NH3)5(H2O)]3+
H2O
slow
Y
fast
[Co(NH3)5Y)]2+ (2)
30. 1/10/2024 30
Therefore, in a number of cobalt(III) reactions the rates of reaction (1)
are the same as the rate of hydrolysis.
Hydroxide ion is uniquely different from other reagents with respect to
its reactivity toward Co(III) amine complexes. It reacts very rapidly (as
much as 106 times faster than H2O) with cobalt(III) amine complexes in
a base hydrolysis reaction (3).
In this reaction, the second order kinetics and the unusually rapid
reaction (3) suggest that OH- is
an exceptionally good nucleophilic reagent toward Co(III) and that the
reaction proceeds through an SN2-type intermediate. However, an
alternative mechanism (5), (6), (7).
[ ( ) ] ) ]
Co NH Cl OH
3 5
2
5
2
+ OH [Co(NH + Cl (3)
-
3
-
(4)
]
[OH
]
)
(
[ -
2
5
3
Cl
NH
Co
k
Rate
[Co(NH3)5Cl]2+ + OH- [Co(NH3)4NH2Cl]+ + H2O (5)
fast
[Co(NH3)4NH2Cl] [Co(NH3)4NH2]2+ + Cl- (6)
slow
[Co(NH3)4NH2] + H2O [Co(NH3)5OH]2+ (7)
fast
31. 1/10/2024 31
will also explain this behaviour. The reaction then proceeds by an
process (6) to give a five-coordinated intermediate which then
reacts with the solvent molecule to give the observed product (7).
This mechanism is supported by considering that if no N-H
hydrogen is present in a Co(III) complex, the complex reacts
slowly with OH-. This certainly suggests that the acid-base
properties of the complex are more important to the rate of reaction
than the nucleophilic properties of OH-.
Substitution reactions of a wide variety of octahedral compounds
have now been studied; where a dissociative type mechanism (SN1)
has most frequently been postulated. This result should not be
surprising. Since six ligands around a central atom leave little room
for adding another group. In a very few examples, evidence for
seven-coordinated intermediate has been presented. Therefore, the
SN2 mechanism can not be discarded for octahedral substitution