International Refereed Journal of Engineering and Science (IRJES) is a peer reviewed online journal for professionals and researchers in the field of computer science. The main aim is to resolve emerging and outstanding problems revealed by recent social and technological change. IJRES provides the platform for the researchers to present and evaluate their work from both theoretical and technical aspects and to share their views.
www.irjes.com
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
International Refereed Journal of Engineering and Science (IRJES) is a peer reviewed online journal for professionals and researchers in the field of computer science. The main aim is to resolve emerging and outstanding problems revealed by recent social and technological change. IJRES provides the platform for the researchers to present and evaluate their work from both theoretical and technical aspects and to share their views.
www.irjes.com
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Strengthening structures via external bonding of advanced fibre reinforced polymer (FRP)
composite is becoming very popular worldwide during the past decade because it provides a more
economical and technically superior alternative to the traditional techniques in many situations as it
offers high strength, low weight, corrosion resistance, high fatigue resistance, easy and rapid
installation and minimal change in structural geometry. Although many in-situ RC beams are
continuous in construction, there has been very limited research work in the area of FRP
strengthening of continuous beams. In the present study an experimental investigation is
carried out to study the behavior of continuous RC beams under static loading. The beams are
strengthened with externally bonded glass fibre reinforced polymer (GFRP) sheets. Different scheme
of strengthening have been employed. The program consists of fourteen continuous (two-span) beams
with overall dimensions equal to (150×200×2300) mm. The beams are grouped into two series
labeled S1 and S2 and each series have different percentage of steel reinforcement. One beam from
each series (S1 and S2) was not strengthened and was considered as a control beam, whereas all
other beams from both the series were strengthened in various patterns with externally bonded GFRP
sheets. The present study examines the responses of RC continuous beams, in terms of failure modes,
enhancement of load capacity and load deflection analysis. The results indicate that the flexural
strength of RC beams can be significantly increased by gluing GFRP sheets to the tension face. In
addition, the epoxy bonded sheets improved the cracking behaviour of the beams by delaying the
formation of visible cracks and reducing crack widths at higher load levels. The experimental results
were validated by using finite element method
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
An Analytical Study on Static and Fatigue Analysis of High Strength Concrete ...Stephen Raj
In recent years FRP stands as a better alternative to restore and upgrade deficient structures. The deficiency may be due to change in design standards, improper construction practices (or) adverse environmental conditions. Under such circumstances, adoption of appropriate technique for restoring the structure becoming challenging task. The objective of this thesis work is to evaluate the static and fatigue response of HSC beams with externally bonded FRP laminates using ANSYS software. The modeling and analysis is done using the software for HSC beam. The beams were strengthened with FRP laminates. The models are provided with carbon types of Fiber Reinforced Polymer (FRP) laminates. The available experimental data of HSC beam in flexure behavior is the source material of this analysis work. All the relevant data are taken from that source material. The static and fatigue load cases are applied and the results are discussed. The comparison is made between the available experimental results of HSC beam with analytical based results of HSC beam.
Applications of Advanced Composite Materials in ConstructionSteven Tyler
Fiber Reinforced Polymer (FRP) composite materials are being used predominately by military and aerospace industries. However, the growing use of advance composite materials in civil construction warrant a special mention.
Behavior and analytical modeling of natural flax frp tube confined plain conc...Libo Yan
As reinforcement flax fibre has the potential to replace glass fibre in fibre-reinforced polymer, composite and coir fibre
can be used in concrete. To achieve sustainable construction, this study presents an experimental investigation of a flax
fibre-reinforced polymer tube as concrete confinement. Results of 24 flax fibre-reinforced polymer tube-confined plain
concrete and coir fibre-reinforced concrete cylinders under axial compression are presented. Test results show
that both flax fibre-reinforced polymer tube-confined plain concrete and fibre-reinforced concrete offer high axial
compressive strength and ductility. A total of 23 existing design- and analysis-oriented models were considered to
predict the ultimate axial compressive strength and strain of flax fibre-reinforced polymer tube-confined plain concrete
and fibre-reinforced concrete. It was found that a few existing design- and analysis-oriented models predicted the
ultimate strengths of all the flax fibre-reinforced polymer tube-confined plain concrete and fibre-reinforced concrete
cylinders accurately. However, no strain models considered match the ultimate strains of these specimens. Two new
equations are proposed to evaluate the ultimate axial strain of flax fibre-reinforced polymer tube-confined plain concrete
and fibre-reinforced concrete.
Shear Behavior of Steel I-Beams Strengthened With CFRP StripsINFOGAIN PUBLICATION
This paper studies the behavior of simply supported steel I-beams strengthened with carbon fiber reinforced polymers (CFRP) strips on the web as shear reinforcement. The experimental program contains seven simply supported steel beams. One of them was considered as a control beam and the other specimens were strengthened with different schemes; varying the position of CFRP strips to the web, its number of layers and its angle of orientation. The results show that applying CFRP strips on the web of the steel I-beams was an effective strengthening method for increasing the load bearing capacity and decreasing the deformations. Using two layers of diagonal CFRP strips on both sides of the web realized the highest increasing in the load capacity. Moreover, finite element analysis method has been utilized to analyze the tested specimens using ANSYS. A great convergence between the experimental results and the corresponding ones obtained from finite element simulation.
Strengthening structures via external bonding of advanced fibre reinforced polymer (FRP) composite is becoming very
popular worldwide during the past decade because it provides a more economical and technically superior alternative
to the traditional techniques in many situations as it offers high strength, low weight, corrosion resistance, high fatigue
resistance, easy and rapid installation and minimal change in structural geometry. Although many in-situ RC beams
are continuous in construction, there has been very limited research work in the area of FRP strengthening of continuous
beams.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Strengthening structures via external bonding of advanced fibre reinforced polymer (FRP)
composite is becoming very popular worldwide during the past decade because it provides a more
economical and technically superior alternative to the traditional techniques in many situations as it
offers high strength, low weight, corrosion resistance, high fatigue resistance, easy and rapid
installation and minimal change in structural geometry. Although many in-situ RC beams are
continuous in construction, there has been very limited research work in the area of FRP
strengthening of continuous beams. In the present study an experimental investigation is
carried out to study the behavior of continuous RC beams under static loading. The beams are
strengthened with externally bonded glass fibre reinforced polymer (GFRP) sheets. Different scheme
of strengthening have been employed. The program consists of fourteen continuous (two-span) beams
with overall dimensions equal to (150×200×2300) mm. The beams are grouped into two series
labeled S1 and S2 and each series have different percentage of steel reinforcement. One beam from
each series (S1 and S2) was not strengthened and was considered as a control beam, whereas all
other beams from both the series were strengthened in various patterns with externally bonded GFRP
sheets. The present study examines the responses of RC continuous beams, in terms of failure modes,
enhancement of load capacity and load deflection analysis. The results indicate that the flexural
strength of RC beams can be significantly increased by gluing GFRP sheets to the tension face. In
addition, the epoxy bonded sheets improved the cracking behaviour of the beams by delaying the
formation of visible cracks and reducing crack widths at higher load levels. The experimental results
were validated by using finite element method
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
An Analytical Study on Static and Fatigue Analysis of High Strength Concrete ...Stephen Raj
In recent years FRP stands as a better alternative to restore and upgrade deficient structures. The deficiency may be due to change in design standards, improper construction practices (or) adverse environmental conditions. Under such circumstances, adoption of appropriate technique for restoring the structure becoming challenging task. The objective of this thesis work is to evaluate the static and fatigue response of HSC beams with externally bonded FRP laminates using ANSYS software. The modeling and analysis is done using the software for HSC beam. The beams were strengthened with FRP laminates. The models are provided with carbon types of Fiber Reinforced Polymer (FRP) laminates. The available experimental data of HSC beam in flexure behavior is the source material of this analysis work. All the relevant data are taken from that source material. The static and fatigue load cases are applied and the results are discussed. The comparison is made between the available experimental results of HSC beam with analytical based results of HSC beam.
Applications of Advanced Composite Materials in ConstructionSteven Tyler
Fiber Reinforced Polymer (FRP) composite materials are being used predominately by military and aerospace industries. However, the growing use of advance composite materials in civil construction warrant a special mention.
Behavior and analytical modeling of natural flax frp tube confined plain conc...Libo Yan
As reinforcement flax fibre has the potential to replace glass fibre in fibre-reinforced polymer, composite and coir fibre
can be used in concrete. To achieve sustainable construction, this study presents an experimental investigation of a flax
fibre-reinforced polymer tube as concrete confinement. Results of 24 flax fibre-reinforced polymer tube-confined plain
concrete and coir fibre-reinforced concrete cylinders under axial compression are presented. Test results show
that both flax fibre-reinforced polymer tube-confined plain concrete and fibre-reinforced concrete offer high axial
compressive strength and ductility. A total of 23 existing design- and analysis-oriented models were considered to
predict the ultimate axial compressive strength and strain of flax fibre-reinforced polymer tube-confined plain concrete
and fibre-reinforced concrete. It was found that a few existing design- and analysis-oriented models predicted the
ultimate strengths of all the flax fibre-reinforced polymer tube-confined plain concrete and fibre-reinforced concrete
cylinders accurately. However, no strain models considered match the ultimate strains of these specimens. Two new
equations are proposed to evaluate the ultimate axial strain of flax fibre-reinforced polymer tube-confined plain concrete
and fibre-reinforced concrete.
Shear Behavior of Steel I-Beams Strengthened With CFRP StripsINFOGAIN PUBLICATION
This paper studies the behavior of simply supported steel I-beams strengthened with carbon fiber reinforced polymers (CFRP) strips on the web as shear reinforcement. The experimental program contains seven simply supported steel beams. One of them was considered as a control beam and the other specimens were strengthened with different schemes; varying the position of CFRP strips to the web, its number of layers and its angle of orientation. The results show that applying CFRP strips on the web of the steel I-beams was an effective strengthening method for increasing the load bearing capacity and decreasing the deformations. Using two layers of diagonal CFRP strips on both sides of the web realized the highest increasing in the load capacity. Moreover, finite element analysis method has been utilized to analyze the tested specimens using ANSYS. A great convergence between the experimental results and the corresponding ones obtained from finite element simulation.
Strengthening structures via external bonding of advanced fibre reinforced polymer (FRP) composite is becoming very
popular worldwide during the past decade because it provides a more economical and technically superior alternative
to the traditional techniques in many situations as it offers high strength, low weight, corrosion resistance, high fatigue
resistance, easy and rapid installation and minimal change in structural geometry. Although many in-situ RC beams
are continuous in construction, there has been very limited research work in the area of FRP strengthening of continuous
beams.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
EFFECT OF CARBON LAMINATION ON THE STRENGTH OF CONCRETE STRUCTURESIAEME Publication
This work consists of preparation and testing of different structural model like cubes, Beams and Columns. They are tested for Compression test, Flexural test and Split tensile Test. The comparison between Laminated and un-laminated Structural Models was made in order to know how much strength gain after testing of these structural models, so by which the rehabilitation of any structure can be done without demolishing it with less weight to strength ratio.
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
Behaviour of Glass Fiber Reinforced Polymer Composite in Flexure Shear Streng...ijtsrd
The corrosion of steel reinforcement in concrete reduces the life of structures, causes high repair costs and can endanger the structural integrity of the structure itself. Glass fibre reinforced polymer GFRP offers a number of advantages over steel especially when used in marine and other salt laden environments. GFRP reinforcing bars are gradually finding wider acceptance as a replacement for conventional steel reinforcement as it offers a number of advantages. Technical studies on a number of concrete structures, from five to eight years old and constructed with GFRP reinforcement, have shown that there is no degradation of the GFRP from the alkaline environment. Concrete is very strong in compression but it is extremely weak in tension. To resist the tensile stress, steel reinforcement is provided in concrete. Reinforcement corrosion and structural deterioration in reinforced concrete structures are common, and prompted many researchers to seek alternative materials and rehabilitation techniques. One such material that has been offered as an alternative to mild steel reinforcement is Glass Fibre Reinforced Polymer GFRP bars and flats. For the repair and strengthening of structural concrete members, strengthening with Glass Fibre Reinforced Polymer GFRP plates is an excellent option. The present work is to study the behavior of Shear resistance of the silica coated GFRP stirrups in the shear test zone. A series of studies were conducted using silica coated GFRP stirrups in shear zone. It is observed that beams with silica coated GFRP flats shear reinforcement have shown failure at higher loads than the theoretical failure loads. Further it is observed that GFRP flats as shear reinforcement exhibit fairly good ductility. Er. Satish Kumar | Mr. Ajit Singh "Behaviour of Glass Fiber Reinforced Polymer Composite in Flexure Shear Strength of Reinforced Concrete Beams" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-3 , April 2020, URL: https://www.ijtsrd.com/papers/ijtsrd30440.pdf Paper Url :https://www.ijtsrd.com/engineering/civil-engineering/30440/behaviour-of-glass-fiber-reinforced-polymer-composite-in-flexure-shear-strength-of-reinforced-concrete-beams/er-satish-kumar
1. FRPs are being planned in the potential rehabilitation of a slab-on-girder bridge. The bridge is a one-way slab supported by prestressed concrete girders. Make a recommendation for what type of FRP (e.g., fibre and resin) would be appropriate.
2. Eight different unidirectional FRPs (4 with a fibre volume fraction of 70% and 4 with a fibre volume fraction of 35%) are going to be fabricated. For each FRP, find the modulus in both the fibre direction and the direction perpendicular to the fibres and sketch the stress-strain curve for each FRP.
3. Using the S806 design standard for a building application, calculate the factored moment resistance, Mr, in positive bending, for the precast (φc = 0.70) FRP-reinforced concrete
Fiber reinforced polymer reinforcement for construction state of the art revieweSAT Journals
Abstract
Development of civil engineering is intimately connected to innovation in structural material. To full fill the requirement of advance infrastructure in India, modern technologies and innovative materials has started to makes its way. Structures with bar corrosion and other distresses requires repair, rehabilitation and retrofits for increase strength, durability and much more life span. Fiber reinforce plastic (FRP) reinforcements provides solution for such work due to its non-corrosive and non-magnetic nature also high strength and low weight ratio. Now a day FRP materials are used for internal reinforcement for RC structures worldwide.
Keywords: Fiber reinforced polymer (FRP), strength, durability, shear and flexure, fire endurance
Experimental and numerical study on behavior of externally bonded rc t beams ...IJARIIT
Fiber-reinforced polymer (FRP) application is a very effective way to repair and strengthen structures that have
become structurally weak over their life span. FRP repair systems provide an economically viable alternative to traditional
repair systems and materials. In this study, an experimental investigation on the flexural behavior of RC T-beams
strengthened using glass fiber reinforced polymer (GFRP) sheets are carried out.
Reinforced concrete T beams externally bonded with GFRP sheets were tested to failure using a symmetrical two
point static loading system. Seven RC T-beams were casted for this experimental test. All of them were weak in flexure and
were having same reinforcement detailing. One beam was used as a control beam and six beams were strengthened using
different configurations of glass fiber reinforced polymer (GFRP) sheets. Experimental data on load, deflection and failure
modes of each of the beams were obtained. The effect of different amount and configuration of GFRP on ultimate load
carrying capacity and failure mode of the beams were investigated.
The experimental results show that externally bonded GFRP can increase the flexural capacity of the beam
significantly. In addition, the results indicated that the most effective configuration was the U-wrap GFRP.A series of
comparative studies on deflection between the present experimental data and results from finite element method and IS code
method were made. A future area of research are being outlined.
Similar to IRJET- Strengthening of Column using CFRP (20)
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.