Hybrid microgrid model based on solar photovoltaic battery fuel cell system for intermittent load applications
•Download as DOCX, PDF•
1 like•164 views
I3E Technologies, #23/A, 2nd Floor SKS Complex, Opp. Bus Stand, Karur-639 001. IEEE PROJECTS AVAILABLE, NON-IEEE PROJECTS AVAILABLE, APPLICATION BASED PROJECTS AVAILABLE, MINI-PROJECTS AVAILABLE. Mobile : 99436 99916, 99436 99926, 99436 99936 Mail ID: i3eprojectskarur@gmail.com Web: www.i3eprojects.com
Report
Share
Report
Share
Recommended
Hybrid microgrid model based on solar photovoltaic battery fuel cell system f...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Pawan kumar meena
Distributed generation refers to small-scale electricity generation near customers or within buildings using renewable sources like PV and wind. The document discusses various modes of distributed generation including micro-hydro, wind turbines, PV panels, waste-to-energy, combined heat and power, and fuel cells. Advantages of distributed generation are reducing transmission losses and construction of transmission lines, while disadvantages include needing adequate protection for conventional distribution systems and complicated dispatch signaling and interconnection.
PV solar system with battery storage - design
This document provides a design proposal for a roof-mounted photovoltaic (PV) system with battery storage for a house in Liskard, Cornwall. It estimates the home's daily energy demand to be 2000 watt hours based on past utility bills and an energy audit. A 668-watt PV array consisting of 4 Sharp ND230A5 modules is designed to meet this demand, taking into account various losses. A 48-volt, 87.72 amp-hour lead-acid battery bank is specified to provide backup power for one day, sized based on the daily load, maximum depth of discharge, and minimum winter temperature. The system is intended to reduce electricity bills by powering daily loads and some evening
Chapter 6 dpp
A captive power plant is a localized source of electricity that provides power to industrial facilities, large offices, or data centers. It can operate in parallel with the local electric grid to export surplus power or independently in island mode. Captive power plants provide benefits like secure power supply, reduced costs through high fuel efficiency, and improved environmental performance from increased fuel efficiency.
DISTRIBUTED GENERATION TECHNOLOGIES
Distributed Generation generally refers to power generation at the point of end user or
customer. Distributed Generation is gaining worldwide acceptance due to it’s a number of benefits.
Distributed Generation eliminates the cost and complexity and reduces the chances of inefficiency
which occur in the transmission and distributed network [1]. Basically electricity produced is
generated at large generating stations which is then send at high voltages through the transmission
lines to the load centers and then through local distribution network distributed to the customers at
distribution level voltage. In present scenario there is an increase in demand which is creating gap
between demand and supply to fulfill this gap distributed generation can plays the significant role.
The main reason for the need of distributed generation is it is clean and continuous. Distributed
generation means generating power on site not centrally. Distributed generation is the best way for
rural electrification. This paper will discuss the importance and benefits of Distributed Generation in
near future
Electro hybrid system
INTRODUCTION
A lot of basic concepts, technologies and pioneering solutions aiming on very high power densities were mainly developed within the last 20 years. Sometimes this is denoted as the mechatronic system integration or simply as mechatronics. Besides many of the technical aspects, the movings within the value chain represent the great challenge in this process. This is because traditionally defined between electronic device and the power module manufacturers, electronics assemblers, and the metalworking industry will blur or slowly disappear. However, the pressure to go this path increases. If one thinks, e.g., about the hybrid drive as an upgrade option for conventional passenger cars, one is directly faced with the lack of construction space as one of the main serious problems (Alkuhayli et al., 2012).
Off Grid Solar Power System; A Complete Power Solution
Off grid solar power systems are self-sustaining and can provide power for critical loads in areas where a power grid is not available.
Concept of Microgrid and CHP system
Microgrids are small-scale power systems that can operate while connected to a traditional grid or independently. They consist of distributed energy resources like generators, storage systems, and controllable loads managed by a central controller. Microgrids can operate in grid-connected mode, importing and exporting power bi-directionally for economic benefit. They can also operate islanded from the main grid to provide reliable power. Combined heat and power systems are efficient as they sequentially produce both electricity and usable heat from the same fuel input. Microgrids provide benefits like utilizing more renewable energy, higher reliability, reduced emissions, and lower costs compared to traditional grids.
Recommended
Hybrid microgrid model based on solar photovoltaic battery fuel cell system f...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Pawan kumar meena
Distributed generation refers to small-scale electricity generation near customers or within buildings using renewable sources like PV and wind. The document discusses various modes of distributed generation including micro-hydro, wind turbines, PV panels, waste-to-energy, combined heat and power, and fuel cells. Advantages of distributed generation are reducing transmission losses and construction of transmission lines, while disadvantages include needing adequate protection for conventional distribution systems and complicated dispatch signaling and interconnection.
PV solar system with battery storage - design
This document provides a design proposal for a roof-mounted photovoltaic (PV) system with battery storage for a house in Liskard, Cornwall. It estimates the home's daily energy demand to be 2000 watt hours based on past utility bills and an energy audit. A 668-watt PV array consisting of 4 Sharp ND230A5 modules is designed to meet this demand, taking into account various losses. A 48-volt, 87.72 amp-hour lead-acid battery bank is specified to provide backup power for one day, sized based on the daily load, maximum depth of discharge, and minimum winter temperature. The system is intended to reduce electricity bills by powering daily loads and some evening
Chapter 6 dpp
A captive power plant is a localized source of electricity that provides power to industrial facilities, large offices, or data centers. It can operate in parallel with the local electric grid to export surplus power or independently in island mode. Captive power plants provide benefits like secure power supply, reduced costs through high fuel efficiency, and improved environmental performance from increased fuel efficiency.
DISTRIBUTED GENERATION TECHNOLOGIES
Distributed Generation generally refers to power generation at the point of end user or
customer. Distributed Generation is gaining worldwide acceptance due to it’s a number of benefits.
Distributed Generation eliminates the cost and complexity and reduces the chances of inefficiency
which occur in the transmission and distributed network [1]. Basically electricity produced is
generated at large generating stations which is then send at high voltages through the transmission
lines to the load centers and then through local distribution network distributed to the customers at
distribution level voltage. In present scenario there is an increase in demand which is creating gap
between demand and supply to fulfill this gap distributed generation can plays the significant role.
The main reason for the need of distributed generation is it is clean and continuous. Distributed
generation means generating power on site not centrally. Distributed generation is the best way for
rural electrification. This paper will discuss the importance and benefits of Distributed Generation in
near future
Electro hybrid system
INTRODUCTION
A lot of basic concepts, technologies and pioneering solutions aiming on very high power densities were mainly developed within the last 20 years. Sometimes this is denoted as the mechatronic system integration or simply as mechatronics. Besides many of the technical aspects, the movings within the value chain represent the great challenge in this process. This is because traditionally defined between electronic device and the power module manufacturers, electronics assemblers, and the metalworking industry will blur or slowly disappear. However, the pressure to go this path increases. If one thinks, e.g., about the hybrid drive as an upgrade option for conventional passenger cars, one is directly faced with the lack of construction space as one of the main serious problems (Alkuhayli et al., 2012).
Off Grid Solar Power System; A Complete Power Solution
Off grid solar power systems are self-sustaining and can provide power for critical loads in areas where a power grid is not available.
Concept of Microgrid and CHP system
Microgrids are small-scale power systems that can operate while connected to a traditional grid or independently. They consist of distributed energy resources like generators, storage systems, and controllable loads managed by a central controller. Microgrids can operate in grid-connected mode, importing and exporting power bi-directionally for economic benefit. They can also operate islanded from the main grid to provide reliable power. Combined heat and power systems are efficient as they sequentially produce both electricity and usable heat from the same fuel input. Microgrids provide benefits like utilizing more renewable energy, higher reliability, reduced emissions, and lower costs compared to traditional grids.
Know the Utility of Off-Grid Solar Power System; the Power Solution
Off-grid systems work independently and have batteries which can store the solar power generated by the system. The panels store sunlight during the day and use the excess power generated in the night.
Gokul
This document summarizes a paper on developing a standalone microgrid powered by a hybrid renewable energy system. The microgrid was designed to provide reliable electricity to remote communities not connected to the main grid. It uses solar PV, wind turbines, and a diesel generator backed by batteries. The hybrid system was designed and implemented to meet technical challenges of remote operation and provide electricity comparable in quality to centralized grids. The microgrid concept and control strategies were applied to maximize efficiency and reliability of the off-grid renewable energy system.
Hybrid Micro Grid Architectures and Challenges
The distribution system is part of the electric power system that links the bulk transmission system and the
individual customers. Increasing environmental concerns, consumer expectations in terms of reliability &
better quality of power supply and improving economics of distributed energy resources (DER) based on
renewable, is making Micro Grid a viable proposition. Present electrical distribution system offers many
technical & operational glitches for successful integration of Micro Grid Technologies. Modern Power systems
are smart, interconnected, interdependent, load sharing and phased mission systems. Micro grids are
composed by distributed generators, energy storage devices, intelligent circuit breakers and local loads. In
this paper, a review of the main micro grid architectures proposed in the literature has been carried out. The
micro grid architectures are first classified regarding their AC or DC distribution buses. Besides, more
complex micro grid architectures will be discussed. Both advantages and disadvantages of each one of the
micro grid families will be discussed.
Projet solar grid
This document appears to be a presentation on a project to design, implement, monitor, and evaluate a grid-connected photovoltaic system. It was presented by Sarath Surendran, a student at Mookambika Technical Campus, and was guided by their professor Ajal A. J. The objective is to determine the reduction in greenhouse gas emissions from using grid-connected PV power and to demonstrate the technical and economic viability. It discusses related work on solar energy street lights with auto tracking, solar-charged stand-alone inverters, and solar energy grid integration systems. It also covers components costs, strengths, weaknesses, opportunities and threats of grid-connected PV systems.
Microgrid
This document outlines what a microgrid is and its key components and operating modes. A microgrid is defined as an electrical distribution system containing controllable loads and distributed energy resources that can operate in a coordinated manner while connected to the central grid or independently. The main goals of a microgrid are improved power quality, reliability and reduced costs and environmental impacts. Microgrids offer advantages like reduced transmission losses, reliable power for critical loads, and environmental benefits from renewable energy use. However, challenges include complex control systems, high costs of battery storage, and difficult resynchronization with the central grid. The document also discusses interconnected microgrids forming larger "power parks" and compares microgrids to conventional grids.
Rural electrification by Lakshmi.Nidoni-Seminar report final
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
Off Grid Homes: A Way to Increase the Access to Electricity
Off-grid houses with renewable energy technologies like solar and backup generators can increase access to electricity, especially as an environmentally-friendly alternative when renewables can't meet needs. They generate, store, manage and use power independently of centralized grids. Well-designed off-grid homes also help reduce carbon footprints. The document provides contact information for a company that designs solar plants for off-grid electricity access.
POWER SYSTEMS PROJECTS ABSTRACT-Wind solar energy -hybrid power generation sy...
This document describes a hybrid wind-solar energy generation system called "WISE" that combines a 3W photovoltaic array and an 18W wind turbine to provide residential electricity. It contains a microcontroller to monitor voltages and switch power between the solar and wind sources, charging a 12V/7Ah battery bank. The battery then powers loads like lights through a DC-DC converter, relay driver, and relay. A block diagram outlines the system components and power flow.
An Overview of Distributed Generation
This document provides an overview of distributed generation (DG), including definitions, technologies, and system architectures. It discusses how DG can help address issues related to load growth and grid reliability by generating power near demand centers. DG includes a variety of technologies like solar PV, fuel cells, and reciprocating engines. It can be interconnected with the grid or operate independently. DG provides economic and environmental benefits but also faces challenges related to integration with the electric grid.
Modified ppt for mtech project
Grid integrated system
study on Integration of DG’s
Key challenges observed
Modelling and study of hybrid systems under different fault conditions
Propose suitable methods to over come some of these challenges
Rural electrification by Lakshmi.Nidoni-seminar ppt
The document discusses rural electrification through solar and wind hybrid systems. It proposes using both solar and wind energy sources together to provide continuous power for rural areas. The hybrid system would integrate solar photovoltaic panels, a wind turbine, batteries for energy storage, and a control system to combine power from the different renewable sources. Design of such a hybrid system requires collecting data on solar radiation levels, wind speeds, and power output of the solar and wind components. The hybrid approach aims to reduce the need for energy storage by harnessing multiple renewable resources.
Large scale solar power plants
Large scale solar power plants mainly used in electronic power grid which could able to store power and use for later purpose.
Hybrid wind solar energy system
This document presents a new hybrid rectifier topology for a wind-solar energy system. The proposed topology fuses a Cuk converter and SEPIC converter, eliminating the need for separate input filters. It allows each renewable energy source to operate individually or simultaneously and to achieve maximum power point tracking for optimal power extraction. Simulation results show that when one source is insufficient to meet load demands, the other source can compensate, improving the overall reliability of the hybrid system.
17 mse008 microgrid
This document discusses microgrids and their status in India. It defines a microgrid as a group of interconnected loads and distributed energy resources that can operate connected to or independently from the main electric grid. Microgrids have advantages like ability to operate in both grid-connected and island modes and facilitate renewable energy integration. However, challenges include potential reverse power flows and transient stability issues during transitions between modes of operation. As of 2017, India had deployed over 150 GW of renewable energy across various state-level microgrid projects, but the technology is still maturing and requires further development and optimization.
Advantages of dc micro grid
Microgrids are the future of power distribution. With the rural population demanding more access to electricity, this is the most efficient and feasible option. In this article, we discuss the major advantages of it.
rural electrification
this is a presentation done to give awareness about power generation and generation using renewable energy sources to children s .In this presentation a new approach of using renewable is give that is "INTEGRATION OF RENEWABLE ENERGY RESOURCES"
Rural Electrification Models and Costs - Homer Energy
This session is part of the Clean Energy Regulators Initiative Webinar Programme.
Theme 9 - Energy Access
Module 2: Rural Electrification Models and Costs
The economics of rural electrification has dramatically changed in the last few years. Fuel prices remain volatile and the technology has improved. In the past, the only economically viable options were grid extension and diesel generators. Now there is a wide range of renewable and hybrid options that are not only technically mature and reliable, but also cost-effective.
This webinar will use results from NREL’s HOMER® modeling software to illustrate the conditions under which different electrification models are most appropriate. In addition to diesel generators and grid extension, the webinar will discuss business models distributing individual systems, such as solar home systems and solar lanterns. The main focus will be on hybrid renewable mini-grids that can range from a few kWs to tens of MWs. It will compare the economics of solar and wind and the impact of different penetrations rates.
Latest M.Tech power system Projects (2016 17)
This document advertises MSR Projects, which provides IEEE project titles and training in PLC and MATLAB. It lists over 30 2016-2017 M.Tech power systems projects focused on topics like power quality, solar power generation, wind power generation, distribution systems, and microgrids. MSR Projects offers project support services including documentation, online support, presentations, publishing papers, and preventing plagiarism. It provides contact information including an address in Hyderabad and a phone number.
Microgrid sem 1
This document provides an overview of microgrids. It defines a microgrid as a small-scale power supply network designed to provide power for a small community using local power generation and storage. Microgrids can operate connected to the main utility grid or independently. They comprise distributed generation sources like renewable energy and thermal sources. Microgrids offer advantages like reliability, reduced emissions, and efficiency. Challenges include voltage and frequency control, storage needs, and protection schemes. Future research directions include demonstration projects and developing microgrids into intelligent energy systems.
Unit2
The document discusses several key topics regarding distributed generation (DG) integration and microgrids:
1) It defines the differences between "integration" which encompasses economic and managerial aspects, and "interconnection" which refers only to the technological aspects.
2) It describes various DG technologies that can be used in microgrids like combined heat and power (CHP) systems, gas turbines, steam turbines, reciprocating engines, microturbines, and fuel cells.
3) It discusses important economic and managerial considerations for microgrid feasibility and viability, such as capacity optimization, demand management, and tariff mechanisms. Technical impacts of DG interconnection like voltage changes and protection challenges are also covered.
Hybrid AC/DC microgrid and Electric Vehicles
The presentation discusses power management and control of a hybrid AC/DC microgrid integrated with renewable energy resources and electric vehicles. It provides an introduction to hybrid AC/DC microgrids and discusses challenges related to renewable energy sources and electric vehicles. The presentation outlines the research objectives which include impact analysis of electric vehicle penetration and developing grid-connected and islanding power control algorithms for the microgrid. It also provides a literature review and proposed methodology. Preliminary simulation results of the hybrid AC/DC microgrid are presented.
Analysis of Shunt APF (Active PowerFilter)
The document analyzes a shunt active power filter based on instantaneous reactive power theory to compensate for harmonics from nonlinear loads. It describes the basic principle and control method of the shunt active power filter, including current tracking, PWM control, and harmonic compensation simulation. The results show the filter can detect harmonics well and enhance power quality by reducing total harmonic distortion below 5%.
More Related Content
What's hot
Know the Utility of Off-Grid Solar Power System; the Power Solution
Off-grid systems work independently and have batteries which can store the solar power generated by the system. The panels store sunlight during the day and use the excess power generated in the night.
Gokul
This document summarizes a paper on developing a standalone microgrid powered by a hybrid renewable energy system. The microgrid was designed to provide reliable electricity to remote communities not connected to the main grid. It uses solar PV, wind turbines, and a diesel generator backed by batteries. The hybrid system was designed and implemented to meet technical challenges of remote operation and provide electricity comparable in quality to centralized grids. The microgrid concept and control strategies were applied to maximize efficiency and reliability of the off-grid renewable energy system.
Hybrid Micro Grid Architectures and Challenges
The distribution system is part of the electric power system that links the bulk transmission system and the
individual customers. Increasing environmental concerns, consumer expectations in terms of reliability &
better quality of power supply and improving economics of distributed energy resources (DER) based on
renewable, is making Micro Grid a viable proposition. Present electrical distribution system offers many
technical & operational glitches for successful integration of Micro Grid Technologies. Modern Power systems
are smart, interconnected, interdependent, load sharing and phased mission systems. Micro grids are
composed by distributed generators, energy storage devices, intelligent circuit breakers and local loads. In
this paper, a review of the main micro grid architectures proposed in the literature has been carried out. The
micro grid architectures are first classified regarding their AC or DC distribution buses. Besides, more
complex micro grid architectures will be discussed. Both advantages and disadvantages of each one of the
micro grid families will be discussed.
Projet solar grid
This document appears to be a presentation on a project to design, implement, monitor, and evaluate a grid-connected photovoltaic system. It was presented by Sarath Surendran, a student at Mookambika Technical Campus, and was guided by their professor Ajal A. J. The objective is to determine the reduction in greenhouse gas emissions from using grid-connected PV power and to demonstrate the technical and economic viability. It discusses related work on solar energy street lights with auto tracking, solar-charged stand-alone inverters, and solar energy grid integration systems. It also covers components costs, strengths, weaknesses, opportunities and threats of grid-connected PV systems.
Microgrid
This document outlines what a microgrid is and its key components and operating modes. A microgrid is defined as an electrical distribution system containing controllable loads and distributed energy resources that can operate in a coordinated manner while connected to the central grid or independently. The main goals of a microgrid are improved power quality, reliability and reduced costs and environmental impacts. Microgrids offer advantages like reduced transmission losses, reliable power for critical loads, and environmental benefits from renewable energy use. However, challenges include complex control systems, high costs of battery storage, and difficult resynchronization with the central grid. The document also discusses interconnected microgrids forming larger "power parks" and compares microgrids to conventional grids.
Rural electrification by Lakshmi.Nidoni-Seminar report final
ABSTRACT
In India, more than 200 million people live in rural areas without access to grid-connected power. A convenient & cost-effective solution would be hybrid power systems which can reduce dependency on grid supply, improve reliability. For a typical domestic load a solar –wind hybrid system is designed with charge controller to charge a conventional battery. To optimize system efficiency, a simple algorithm is developed for system sizing. Total cost of unit is calculated using life cycle cost analysis and payback period.
Off Grid Homes: A Way to Increase the Access to Electricity
Off-grid houses with renewable energy technologies like solar and backup generators can increase access to electricity, especially as an environmentally-friendly alternative when renewables can't meet needs. They generate, store, manage and use power independently of centralized grids. Well-designed off-grid homes also help reduce carbon footprints. The document provides contact information for a company that designs solar plants for off-grid electricity access.
POWER SYSTEMS PROJECTS ABSTRACT-Wind solar energy -hybrid power generation sy...
This document describes a hybrid wind-solar energy generation system called "WISE" that combines a 3W photovoltaic array and an 18W wind turbine to provide residential electricity. It contains a microcontroller to monitor voltages and switch power between the solar and wind sources, charging a 12V/7Ah battery bank. The battery then powers loads like lights through a DC-DC converter, relay driver, and relay. A block diagram outlines the system components and power flow.
An Overview of Distributed Generation
This document provides an overview of distributed generation (DG), including definitions, technologies, and system architectures. It discusses how DG can help address issues related to load growth and grid reliability by generating power near demand centers. DG includes a variety of technologies like solar PV, fuel cells, and reciprocating engines. It can be interconnected with the grid or operate independently. DG provides economic and environmental benefits but also faces challenges related to integration with the electric grid.
Modified ppt for mtech project
Grid integrated system
study on Integration of DG’s
Key challenges observed
Modelling and study of hybrid systems under different fault conditions
Propose suitable methods to over come some of these challenges
Rural electrification by Lakshmi.Nidoni-seminar ppt
The document discusses rural electrification through solar and wind hybrid systems. It proposes using both solar and wind energy sources together to provide continuous power for rural areas. The hybrid system would integrate solar photovoltaic panels, a wind turbine, batteries for energy storage, and a control system to combine power from the different renewable sources. Design of such a hybrid system requires collecting data on solar radiation levels, wind speeds, and power output of the solar and wind components. The hybrid approach aims to reduce the need for energy storage by harnessing multiple renewable resources.
Large scale solar power plants
Large scale solar power plants mainly used in electronic power grid which could able to store power and use for later purpose.
Hybrid wind solar energy system
This document presents a new hybrid rectifier topology for a wind-solar energy system. The proposed topology fuses a Cuk converter and SEPIC converter, eliminating the need for separate input filters. It allows each renewable energy source to operate individually or simultaneously and to achieve maximum power point tracking for optimal power extraction. Simulation results show that when one source is insufficient to meet load demands, the other source can compensate, improving the overall reliability of the hybrid system.
17 mse008 microgrid
This document discusses microgrids and their status in India. It defines a microgrid as a group of interconnected loads and distributed energy resources that can operate connected to or independently from the main electric grid. Microgrids have advantages like ability to operate in both grid-connected and island modes and facilitate renewable energy integration. However, challenges include potential reverse power flows and transient stability issues during transitions between modes of operation. As of 2017, India had deployed over 150 GW of renewable energy across various state-level microgrid projects, but the technology is still maturing and requires further development and optimization.
Advantages of dc micro grid
Microgrids are the future of power distribution. With the rural population demanding more access to electricity, this is the most efficient and feasible option. In this article, we discuss the major advantages of it.
rural electrification
this is a presentation done to give awareness about power generation and generation using renewable energy sources to children s .In this presentation a new approach of using renewable is give that is "INTEGRATION OF RENEWABLE ENERGY RESOURCES"
Rural Electrification Models and Costs - Homer Energy
This session is part of the Clean Energy Regulators Initiative Webinar Programme.
Theme 9 - Energy Access
Module 2: Rural Electrification Models and Costs
The economics of rural electrification has dramatically changed in the last few years. Fuel prices remain volatile and the technology has improved. In the past, the only economically viable options were grid extension and diesel generators. Now there is a wide range of renewable and hybrid options that are not only technically mature and reliable, but also cost-effective.
This webinar will use results from NREL’s HOMER® modeling software to illustrate the conditions under which different electrification models are most appropriate. In addition to diesel generators and grid extension, the webinar will discuss business models distributing individual systems, such as solar home systems and solar lanterns. The main focus will be on hybrid renewable mini-grids that can range from a few kWs to tens of MWs. It will compare the economics of solar and wind and the impact of different penetrations rates.
Latest M.Tech power system Projects (2016 17)
This document advertises MSR Projects, which provides IEEE project titles and training in PLC and MATLAB. It lists over 30 2016-2017 M.Tech power systems projects focused on topics like power quality, solar power generation, wind power generation, distribution systems, and microgrids. MSR Projects offers project support services including documentation, online support, presentations, publishing papers, and preventing plagiarism. It provides contact information including an address in Hyderabad and a phone number.
Microgrid sem 1
This document provides an overview of microgrids. It defines a microgrid as a small-scale power supply network designed to provide power for a small community using local power generation and storage. Microgrids can operate connected to the main utility grid or independently. They comprise distributed generation sources like renewable energy and thermal sources. Microgrids offer advantages like reliability, reduced emissions, and efficiency. Challenges include voltage and frequency control, storage needs, and protection schemes. Future research directions include demonstration projects and developing microgrids into intelligent energy systems.
Unit2
The document discusses several key topics regarding distributed generation (DG) integration and microgrids:
1) It defines the differences between "integration" which encompasses economic and managerial aspects, and "interconnection" which refers only to the technological aspects.
2) It describes various DG technologies that can be used in microgrids like combined heat and power (CHP) systems, gas turbines, steam turbines, reciprocating engines, microturbines, and fuel cells.
3) It discusses important economic and managerial considerations for microgrid feasibility and viability, such as capacity optimization, demand management, and tariff mechanisms. Technical impacts of DG interconnection like voltage changes and protection challenges are also covered.
What's hot (20)
Know the Utility of Off-Grid Solar Power System; the Power Solution
Know the Utility of Off-Grid Solar Power System; the Power Solution
Rural electrification by Lakshmi.Nidoni-Seminar report final
Rural electrification by Lakshmi.Nidoni-Seminar report final
Off Grid Homes: A Way to Increase the Access to Electricity
Off Grid Homes: A Way to Increase the Access to Electricity
POWER SYSTEMS PROJECTS ABSTRACT-Wind solar energy -hybrid power generation sy...
POWER SYSTEMS PROJECTS ABSTRACT-Wind solar energy -hybrid power generation sy...
Rural electrification by Lakshmi.Nidoni-seminar ppt
Rural electrification by Lakshmi.Nidoni-seminar ppt
Rural Electrification Models and Costs - Homer Energy
Rural Electrification Models and Costs - Homer Energy
Viewers also liked
Hybrid AC/DC microgrid and Electric Vehicles
The presentation discusses power management and control of a hybrid AC/DC microgrid integrated with renewable energy resources and electric vehicles. It provides an introduction to hybrid AC/DC microgrids and discusses challenges related to renewable energy sources and electric vehicles. The presentation outlines the research objectives which include impact analysis of electric vehicle penetration and developing grid-connected and islanding power control algorithms for the microgrid. It also provides a literature review and proposed methodology. Preliminary simulation results of the hybrid AC/DC microgrid are presented.
Analysis of Shunt APF (Active PowerFilter)
The document analyzes a shunt active power filter based on instantaneous reactive power theory to compensate for harmonics from nonlinear loads. It describes the basic principle and control method of the shunt active power filter, including current tracking, PWM control, and harmonic compensation simulation. The results show the filter can detect harmonics well and enhance power quality by reducing total harmonic distortion below 5%.
Shunt active power filter
The document describes a Simulink model that was created to improve total harmonic distortion (THD) using a shunt active power filter. The model simulates a power system with a non-linear load connected to an ideal grid voltage. The shunt active power filter is connected 0.1 seconds after simulation start and works to compensate for harmonics by producing currents equal in magnitude but opposite in phase to the load harmonics. Simulation results show the THD is reduced from around 30.9% on the load side to 2.79% on the source side once the active filter is connected, below the maximum allowable limit.
Active_Power_Filter
This document defines power quality and current harmonics. It discusses passive filters and active power filters, including voltage sourced and current sourced active power filters. Active power filters are compared to passive filters, noting active filters' advantages in eliminating any harmonics without tuning, but their higher cost and complexity. The document concludes by describing the Denizli-2 active power filter application in Turkey, which uses a current sourced converter design to filter 5th harmonics at a 5 MVA installation.
Active Power Filter
Harmonics created by nonlinear loads such as arc furnaces, cycloconverters and motor drives destroys the power quality in the system. They not only affect the working of adjacent loads but also shorten the life of power equipment by creating excessive losses. ‘Shunt Active Power Filter’ is a modern addition to family of compensating devices. It has superior qualities over its contemporaries namely SVCs and STATCOMs. It not only mitigates harmonics within the allowable limits defined by IEEE Std 519-1992, but also compensates unbalancing and reactive power in the system. Consequently, only active power is supplied by the source thus power factor approaches unity. A fully functional Simulink model of Shunt Active Power Filter has been designed based on ‘Instantaneous Power Theory’ or ‘p-q Theory’. The results of simulation comply with all the features described by the theory, justifying employment of SAPF in the industry.
Microgrid Presentation
Its a great presentation on Microgrid covering various aspects of Microgrid.
Guys who worked on this presentation:
1: Shahab Khan
2: Reshadat Ali
wind energy Seminar
This document discusses renewable energy resources, specifically wind energy technology. It provides information on wind power potential in India, the evolution of wind turbines from ancient uses to modern electricity generation, types of wind turbines including horizontal axis and vertical axis designs, key components of wind turbines like blades and towers, and advantages and disadvantages of wind power. Key points covered include India's wind power potential of 46,092 MW, the declining costs of wind energy production from 1979 to 2012, and how wind farms are needed to provide electricity at utility scales.
Viewers also liked (7)
Similar to Hybrid microgrid model based on solar photovoltaic battery fuel cell system for intermittent load applications
D0462530
1) The document discusses microgrids which integrate distributed energy resources to provide electricity for local areas. Microgrids can operate connected to the main power grid or independently.
2) Microgrids offer economic, technical, and environmental benefits over conventional power systems. They improve access to electricity, lower costs, increase revenue opportunities, and reduce emissions.
3) The technical aspects of microgrids include energy resources, power electronics, control systems, and the ability to operate in both grid-connected and isolated modes. Microgrids provide reliable local power generation and energy management.
PPT IS ON MICROGRID
THIS PPT IS DONE ON THE MICROGRID. IN THIS PPT WE DISCUSSED THE USES OF MICROGRIDS AND THEIR REAL-LIFE APPLICATIONS AND HOW THEY ARE INTERCONNECTED TO EACH OTHER AND THE MAJOR DIFFERENCE BETWEEN THE CONVENTIONAL GRIDS AND THE MICROGRIDS AND THEIR USES, ADVANTAGES ARE ALSO DISCUSSED IN THIS PRESENTATION AND USES IN FUTURE ALSO AND THIS PPT IS SO USEFUL TO MANY STUDENTS
Microgrid sem 1
This document provides an overview of microgrids, including:
- Microgrids are small-scale power supply networks that provide power for local communities using local power generation and storage. They can operate connected to or isolated from the main utility grid.
- Microgrids have various advantages over the conventional grid like reduced transmission losses, reliable power for critical loads, and environmental benefits from renewable sources.
- Microgrids also face challenges like controlling voltage, frequency and power quality during islanding operations and need battery storage which requires more space and maintenance.
- Future research directions include investigating full-scale microgrid development and control methods under different operating modes.
Analysis and Implementation of Power Quality Enhancement Techniques in Hybrid...
This document discusses power quality enhancement techniques for hybrid AC/DC microgrids. A microgrid consists of distributed energy resources (DERs) like solar panels, wind turbines, and batteries that can operate connected or disconnected from the main power grid. When operating independently, control methods are needed to coordinate the AC and DC sub-grids. The performance of a hybrid microgrid system is analyzed in this paper using MATLAB/Simulink. Key challenges for microgrids are discussed like protection systems and maintaining stability with variable DERs and loads.
Power Quality Enhancement Techniques in Hybrid AC DC Microgrid Analysis and I...
Distributed generators DGs that rely on renewable energy sources have become more important in the face of rising global temperatures. Substantial impetus will soon be supplied by wind, solar energy, biomass, mini hydro, and the use of fuel cells and microturbines. Distributed generation, where electricity is produced by a number of different renewable and unconventional energy sources, has emerged as a viable option for the construction of modern electrical systems because to its low environmental impact, scalability, and adaptability. A microgrid is a small scale electrical grid in which multiple loads and distributed generators are coordinated under a single set of controls. Microgrids are a kind of integrated energy delivery system that may either work in tandem with the main power grid or operate autonomously. The concept of a microgrid eliminates the need for several inverters in a single AC or DC grid and simplifies the connection of intermittent, renewable AC and DC power sources and loads. Equipment safety and security issues have been brought to light by the power electronic converters that link DGs to the utility grid. Greater local dependability, lower feeder losses, local voltage support, increased efficiency through waste heat use, voltage sag correction, and uninterruptible power supply are only some of the configuration options available to the client for the microgrid. In this study, we analyse the functionality of a hybrid AC DC microgrid while connected to the mains power supply. A solar array, a wind generator, and a battery are used to build a microgrid. The converters can now properly coordinate the AC and DC sub grids thanks to the added control techniques. Results were obtained by use of the MATLAB SIMULINK software environment. Sumit Kumar | Ashish Bhargava "Power Quality Enhancement Techniques in Hybrid AC/DC Microgrid Analysis and Implementation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-6 | Issue-6 , October 2022, URL: https://www.ijtsrd.com/papers/ijtsrd52196.pdf Paper URL: https://www.ijtsrd.com/engineering/electrical-engineering/52196/power-quality-enhancement-techniques-in-hybrid-acdc-microgrid-analysis-and-implementation/sumit-kumar
Hybrid micro grid systems drivers & challenges
This document discusses hybrid microgrid systems, which integrate multiple distributed energy resources like solar, wind, biomass, and batteries. It addresses the technical challenges of operating such hybrid systems and optimizing resource allocation. Key points discussed include:
1) Hybrid systems improve reliability over single resource microgrids but pose integration challenges.
2) Resource optimization techniques like genetic algorithms and particle swarm optimization are used to minimize costs while meeting load.
3) Technical challenges include seamlessly transitioning between grid-tied and isolated modes of operation, achieving black start capability, and developing an adaptive protection strategy.
Micro grid
A microgrid is a small-scale power grid that can operate independently or connect to the main grid. It allows local power generation for local loads using distributed energy resources like solar panels, batteries, and generators. Microgrids provide benefits like increased reliability, lower costs, and the ability to incorporate renewable energy. They face challenges around regulation, financing, and technology but offer a more efficient alternative to the conventional grid.
microgrid final (2).pptx
Microgrid, Why microgrid, types of microgrid ,control of microgrid, Power and energy management in microgrid future research areas in microgrid
1MWH SOLAR PLANT CONNECTED TO MICROGRID WITH BESS CONTROLLER
This document summarizes a study on a 1 megawatt-hour solar plant connected to a microgrid with a battery energy storage system (BESS) controller. The study models a microgrid system integrating multiple solar photovoltaic units and a BESS. It proposes a control strategy to regulate power flow between these components and the utility grid. Simulation results show the control strategy maintains load current by compensating for variations from the solar power and grid using available power from BESS. The strategy allows transfer between grid-connected and island modes of operation, with BESS responsible for maintaining voltage and frequency in island mode.
Introduction to Microgrid
This slide presents an introduction to microgrid. This is the second class for the subject 'Distribution Generation and Smart Grid'. Class wise I will provide all the discussions and analysis.
Presentation on recent trends in distribution sytems by pogakula abdul nabi
The document is a technical seminar report on recent trends in distributed energy systems submitted by Pogakula Abdul Nabi. It discusses how traditional power systems are centralized but new challenges are driving a change to distributed energy systems. It outlines trends like solar storage, smart microgrids, DC microgrids, and achieving 100% renewable energy. Distributed energy resources can provide fuel diversity, reduce transmission losses, and keep power available during outages. Solar photovoltaics are an important distributed technology and their costs are decreasing. Storage is needed to integrate intermittent solar power into the grid and hybrid storage approaches are being developed. Smart grids with two-way communication and control allow more renewable integration and customer choice. Microgrids are a key component to
Resilience MicroGrid
Community microgrids can provide numerous benefits to communities. Microgrids are designed to meet local energy needs in a smarter, cleaner and greener way. They can (1) ensure a reliable energy supply for critical facilities like hospitals when the main power grid goes down, (2) significantly reduce energy costs through strategies like energy efficiency and combined heat and power systems, and (3) lower carbon emissions by incorporating renewable energy, efficient generation and smart energy management at the local level.
Renewable Energy Driven Optimized Microgrid System: A Case Study with Hybrid ...
This document summarizes a research study on designing an optimized hybrid microgrid system to meet the thermal and electrical demands of a building in a cost-effective way. The microgrid integrates solar PV, battery energy storage, and thermal energy storage. It was designed to reduce the building's energy consumption and carbon footprint. A case study of a campus in India analyzed reducing cooling loads by 50% using efficient chilled water and thermal energy storage. Shifting night cooling loads to daytime using thermal energy storage helped maximize solar energy use and reduce needed battery storage. The optimized microgrid design met the campus's total annual electrical load of 770,000 kWh through efficiency measures and renewable energy integration.
Reactive Power Sharing Droop Control Strategy for DG Units in an Islanded Mic...
The proposed method mainly includes two important operations: error reduction operation and voltage
recovery operation. The sharing accuracy is improved by the sharing error reduction operation, which is
activated by the low-bandwidth synchronization signals. However, the error reduction operation will result in
a decrease in output voltage amplitude. Therefore, the voltage recovery operation is proposed to compensate
the decrease., due to increasing the demand of electricity as well as rapid depletion of fossil fuels, and the
government policies on reduction of greenhouse gas emissions , renewable energy technologies are more
attractive and various types of distributed generation sources, such as wind turbine generators and solar
photo voltaic panels are being connected to low-voltage distribution networks. Micro grid is an integrated
system that contain in s distributed generation sources, control systems, load management, energy storage
and communication infrastructure capability to work in both grid connected and island mode to optimize
energy usage. The paper presents a advanced control technique for a micro grid system which works
efficiently under a decentralized control system.
Microgrids
This document presents information on power generation using microgrids. It defines a microgrid as a small-scale power supply network designed to provide power for a small community using local power generation and loads. Microgrids have several components including distributed generation sources, loads, storage, a controller, and a point of common coupling. Microgrids can operate in grid-connected or island modes. They provide more efficient, reliable, and environmentally friendly power compared to conventional grids. Future research aims to increase microgrid stability and affordability so they can replace conventional grids and facilitate greater renewable energy use.
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
In our nation the usage of electricity is increasing day-by-day. According to that conserdations, the generated
power from the non-renewable sources will not satisfy the demands properly. so for these purpose, by using
multiple renewable sources, it will be very useful to some type of dc applications. The power produced from the
individual renewable sources will not be satisfy the demand at all times. So by integration of a multiple
renewable sources such as wind and solar a huge amount of power will be produced. These power will be
coordinated to the ac grid or directly to dc consumers. For integration of renewable sources an aggregated model
has to be proposed. In according to these operation BESS (battery energy storage system)is equipped with the
system for maintaining the power balance. For obtaining the power balance the adaptive droop control technique
has to be proposed and droop curves are evaluated. The droop characteristics are selected on the basis of the
deviation between the optimized and real-time SOC of the BESS. In these paper, the operational analysis can be
performed when real time soc is higher than the optimised soc and droop curves are plotted.
Presentation on DC Microgrid protection.pptx
This presentation provides an overview of DC microgrids. It discusses the components of microgrids including distributed generation sources, loads, storage devices, and controllers. It describes the operating modes of microgrids as being either grid-connected or island mode. The presentation outlines the need for microgrids to provide backup power and enhance grid stability and resilience while being more efficient and environmentally friendly than conventional grids. It notes advantages such as improved reliability but also challenges involving battery storage and synchronization.
Presentation on DC Microgrid protection.pptx
This presentation provides an overview of DC microgrids. It discusses the components of microgrids including distributed generation sources, loads, storage devices, and controllers. It describes the operating modes of microgrids as being either grid-connected or island mode. The presentation outlines the need for microgrids to provide backup power and enhance grid stability and resilience while being more efficient and environmentally friendly than conventional grids. It notes advantages such as improved reliability but also challenges involving battery storage and synchronization.
Simulation of a microgrid for a non-interconnected zone that integrates renew...
This document develops a simulation model of a microgrid for a non-interconnected zone in Colombia that integrates renewable energies. The microgrid model represents the electrical network of Puerto Carreño and includes a solar energy source, wind energy source, energy storage, and diesel generator. The simulation explores the effects of including over 30% renewable energy on load balancing and network stability. Results show that higher renewable penetration can cause imbalances affecting frequency and stability if not regulated by a control system coordinating the different energy sources and storage.
Similar to Hybrid microgrid model based on solar photovoltaic battery fuel cell system for intermittent load applications (20)
Analysis and Implementation of Power Quality Enhancement Techniques in Hybrid...
Analysis and Implementation of Power Quality Enhancement Techniques in Hybrid...
Power Quality Enhancement Techniques in Hybrid AC DC Microgrid Analysis and I...
Power Quality Enhancement Techniques in Hybrid AC DC Microgrid Analysis and I...
1MWH SOLAR PLANT CONNECTED TO MICROGRID WITH BESS CONTROLLER
1MWH SOLAR PLANT CONNECTED TO MICROGRID WITH BESS CONTROLLER
Presentation on recent trends in distribution sytems by pogakula abdul nabi
Presentation on recent trends in distribution sytems by pogakula abdul nabi
Renewable Energy Driven Optimized Microgrid System: A Case Study with Hybrid ...
Renewable Energy Driven Optimized Microgrid System: A Case Study with Hybrid ...
Reactive Power Sharing Droop Control Strategy for DG Units in an Islanded Mic...
Reactive Power Sharing Droop Control Strategy for DG Units in an Islanded Mic...
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
An Higher Case Operation and Analysis of a Multiple Renewable Resources Conne...
Simulation of a microgrid for a non-interconnected zone that integrates renew...
Simulation of a microgrid for a non-interconnected zone that integrates renew...
More from I3E Technologies
Add
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Design of a low voltage low-dropout regulator
This document outlines the sections and contents for a project report on designing a low-voltage low-dropout regulator. It includes sections for an abstract, introduction, literature survey, existing and proposed systems, advantages, requirements, diagrams, implementation, testing, conclusions, and references. Contact information and course offerings are also provided for i3e Technologies.
An efficient constant multiplier architecture based on vertical horizontal bi...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Aging aware reliable multiplier design with adaptive hold logic
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A high performance fir filter architecture for fixed and reconfigurable appli...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A generalized algorithm and reconfigurable architecture for efficient and sca...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
A combined sdc sdf architecture for normal i o pipelined radix-2 fft
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Reverse converter design via parallel prefix adders novel components, method...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Pre encoded multipliers based on non-redundant radix-4 signed-digit encoding
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Energy optimized subthreshold vlsi logic family with unbalanced pull up down ...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Variable form carrier-based pwm for boost-voltage motor driver with a charge-...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Ultrasparse ac link converters
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Single inductor dual-output buck–boost power factor correction converter
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Ripple minimization through harmonic elimination in asymmetric interleaved mu...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Resonance analysis and soft switching design of isolated boost converter with...
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Reliability evaluation of conventional and interleaved dc–dc boost converters
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Power factor corrected zeta converter based improved power quality switched m...
The document describes a proposed switched mode power supply (SMPS) system that uses a front-end power factor corrected Zeta converter to improve power quality. The front-end converter reduces 100-Hz ripple and improves power factor and voltage regulation. Simulation and testing of a laboratory prototype showed the proposed SMPS enhanced performance under varying input voltages and loading conditions, meeting international power quality standards.
Pfc cuk converter fed bldc motor drive
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
Optimized operation of current fed dual active bridge dc dc converter for pv ...
This document discusses optimized operation of a current-fed dual active bridge DC-DC converter for photovoltaic applications. It analyzes the operating principle and soft-switching conditions over a wide operating range with phase shift and duty cycle control. An optimized operating mode is proposed to achieve minimum RMS transformer current and extend the soft-switching region to reduce losses. Experimental results from a 5 kW hardware prototype verify the analysis. Contact and location information is also provided for an organization that develops IEEE software and hardware projects.
Online variable topology type photovoltaic grid-connected inverter
I3E Technologies,
#23/A, 2nd Floor SKS Complex,
Opp. Bus Stand, Karur-639 001.
IEEE PROJECTS AVAILABLE,
NON-IEEE PROJECTS AVAILABLE,
APPLICATION BASED PROJECTS AVAILABLE,
MINI-PROJECTS AVAILABLE.
Mobile : 99436 99916, 99436 99926, 99436 99936
Mail ID: i3eprojectskarur@gmail.com
Web: www.i3etechnologies.com, www.i3eprojects.com
More from I3E Technologies (20)
An efficient constant multiplier architecture based on vertical horizontal bi...
An efficient constant multiplier architecture based on vertical horizontal bi...
Aging aware reliable multiplier design with adaptive hold logic
Aging aware reliable multiplier design with adaptive hold logic
A high performance fir filter architecture for fixed and reconfigurable appli...
A high performance fir filter architecture for fixed and reconfigurable appli...
A generalized algorithm and reconfigurable architecture for efficient and sca...
A generalized algorithm and reconfigurable architecture for efficient and sca...
A combined sdc sdf architecture for normal i o pipelined radix-2 fft
A combined sdc sdf architecture for normal i o pipelined radix-2 fft
Reverse converter design via parallel prefix adders novel components, method...
Reverse converter design via parallel prefix adders novel components, method...
Pre encoded multipliers based on non-redundant radix-4 signed-digit encoding
Pre encoded multipliers based on non-redundant radix-4 signed-digit encoding
Energy optimized subthreshold vlsi logic family with unbalanced pull up down ...
Energy optimized subthreshold vlsi logic family with unbalanced pull up down ...
Variable form carrier-based pwm for boost-voltage motor driver with a charge-...
Variable form carrier-based pwm for boost-voltage motor driver with a charge-...
Single inductor dual-output buck–boost power factor correction converter
Single inductor dual-output buck–boost power factor correction converter
Ripple minimization through harmonic elimination in asymmetric interleaved mu...
Ripple minimization through harmonic elimination in asymmetric interleaved mu...
Resonance analysis and soft switching design of isolated boost converter with...
Resonance analysis and soft switching design of isolated boost converter with...
Reliability evaluation of conventional and interleaved dc–dc boost converters
Reliability evaluation of conventional and interleaved dc–dc boost converters
Power factor corrected zeta converter based improved power quality switched m...
Power factor corrected zeta converter based improved power quality switched m...
Optimized operation of current fed dual active bridge dc dc converter for pv ...
Optimized operation of current fed dual active bridge dc dc converter for pv ...
Online variable topology type photovoltaic grid-connected inverter
Online variable topology type photovoltaic grid-connected inverter
Recently uploaded
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
K8sGPT is a tool that analyzes and diagnoses Kubernetes clusters. This presentation was used to share the requirements and dependencies to deploy K8sGPT in a local environment.
Casting-Defect-inSlab continuous casting.pdf
Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting. Casting-Defect-inSlab continuous casting
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning and Applications (NLAIM 2024) offers a premier global platform for exchanging insights and findings in the theory, methodology, and applications of NLP, Artificial Intelligence, Machine Learning, and their applications. The conference seeks substantial contributions across all key domains of NLP, Artificial Intelligence, Machine Learning, and their practical applications, aiming to foster both theoretical advancements and real-world implementations. With a focus on facilitating collaboration between researchers and practitioners from academia and industry, the conference serves as a nexus for sharing the latest developments in the field.
Recycled Concrete Aggregate in Construction Part II
Using recycled concrete aggregates (RCA) for pavements is crucial to achieving sustainability. Implementing RCA for new pavement can minimize carbon footprint, conserve natural resources, reduce harmful emissions, and lower life cycle costs. Compared to natural aggregate (NA), RCA pavement has fewer comprehensive studies and sustainability assessments.
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Traditionally, dealing with real-time data pipelines has involved significant overhead, even for straightforward tasks like data transformation or masking. However, in this talk, we’ll venture into the dynamic realm of WebAssembly (WASM) and discover how it can revolutionize the creation of stateless streaming pipelines within a Kafka (Redpanda) broker. These pipelines are adept at managing low-latency, high-data-volume scenarios.
官方认证美国密歇根州立大学毕业证学位证书原版一模一样
原版一模一样【微信：741003700 】【美国密歇根州立大学毕业证学位证书】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...University of Maribor
Slides from talk presenting:
Aleš Zamuda: Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapter and Networking.
Presentation at IcETRAN 2024 session:
"Inter-Society Networking Panel GRSS/MTT-S/CIS
Panel Session: Promoting Connection and Cooperation"
IEEE Slovenia GRSS
IEEE Serbia and Montenegro MTT-S
IEEE Slovenia CIS
11TH INTERNATIONAL CONFERENCE ON ELECTRICAL, ELECTRONIC AND COMPUTING ENGINEERING
3-6 June 2024, Niš, SerbiaAdvanced control scheme of doubly fed induction generator for wind turbine us...
This paper describes a speed control device for generating electrical energy on an electricity network based on the doubly fed induction generator (DFIG) used for wind power conversion systems. At first, a double-fed induction generator model was constructed. A control law is formulated to govern the flow of energy between the stator of a DFIG and the energy network using three types of controllers: proportional integral (PI), sliding mode controller (SMC) and second order sliding mode controller (SOSMC). Their different results in terms of power reference tracking, reaction to unexpected speed fluctuations, sensitivity to perturbations, and resilience against machine parameter alterations are compared. MATLAB/Simulink was used to conduct the simulations for the preceding study. Multiple simulations have shown very satisfying results, and the investigations demonstrate the efficacy and power-enhancing capabilities of the suggested control system.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Medical image analysis has witnessed significant advancements with deep learning techniques. In the domain of brain tumor segmentation, the ability to
precisely delineate tumor boundaries from magnetic resonance imaging (MRI)
scans holds profound implications for diagnosis. This study presents an ensemble convolutional neural network (CNN) with transfer learning, integrating
the state-of-the-art Deeplabv3+ architecture with the ResNet18 backbone. The
model is rigorously trained and evaluated, exhibiting remarkable performance
metrics, including an impressive global accuracy of 99.286%, a high-class accuracy of 82.191%, a mean intersection over union (IoU) of 79.900%, a weighted
IoU of 98.620%, and a Boundary F1 (BF) score of 83.303%. Notably, a detailed comparative analysis with existing methods showcases the superiority of
our proposed model. These findings underscore the model’s competence in precise brain tumor localization, underscoring its potential to revolutionize medical
image analysis and enhance healthcare outcomes. This research paves the way
for future exploration and optimization of advanced CNN models in medical
imaging, emphasizing addressing false positives and resource efficiency.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building
22CYT12-Unit-V-E Waste and its Management.ppt
Introduction- e - waste – definition - sources of e-waste– hazardous substances in e-waste - effects of e-waste on environment and human health- need for e-waste management– e-waste handling rules - waste minimization techniques for managing e-waste – recycling of e-waste - disposal treatment methods of e- waste – mechanism of extraction of precious metal from leaching solution-global Scenario of E-waste – E-waste in India- case studies.
Recently uploaded (20)
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
KuberTENes Birthday Bash Guadalajara - K8sGPT first impressions
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
IEEE Aerospace and Electronic Systems Society as a Graduate Student Member
International Conference on NLP, Artificial Intelligence, Machine Learning an...
International Conference on NLP, Artificial Intelligence, Machine Learning an...
Engineering Drawings Lecture Detail Drawings 2014.pdf
Engineering Drawings Lecture Detail Drawings 2014.pdf
Recycled Concrete Aggregate in Construction Part II
Recycled Concrete Aggregate in Construction Part II
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Harnessing WebAssembly for Real-time Stateless Streaming Pipelines
Manufacturing Process of molasses based distillery ppt.pptx
Manufacturing Process of molasses based distillery ppt.pptx
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Presentation of IEEE Slovenia CIS (Computational Intelligence Society) Chapte...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Advanced control scheme of doubly fed induction generator for wind turbine us...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Redefining brain tumor segmentation: a cutting-edge convolutional neural netw...
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
2008 BUILDING CONSTRUCTION Illustrated - Ching Chapter 02 The Building.pdf
Hybrid microgrid model based on solar photovoltaic battery fuel cell system for intermittent load applications
- 1. HYBRID MICROGRID MODEL BASED ON SOLAR PHOTOVOLTAIC BATTERY FUEL CELL SYSTEM FOR INTERMITTENT LOAD APPLICATIONS ABSTRACT Microgrids are a subset of the modern power structure using distributed generation to supply power to communities rather than vast regions. The relatively smaller scale mitigates transmission loss with better control, greater security, increased reliability, and design flexibility. This study explores the modeled performance and cost viability of a hybrid grid-tied microgrid that utilizes the combination of solar photovoltaic (PV), batteries, and fuel cell (FC) systems. The proposed concept highlights that each community home is equipped with more solar PV than is required for normal operation. As the homes are part of a microgrid, excess or unused energy from one home is collected for use elsewhere within themicrogrid footprint. The surplus power that would have been discarded becomes a community asset and is used to run intermittent services. The modeled community does not have parking adjacent to each home allowing for the installment of a privately owned slower Level 2 charger. This makes electric vehicle (EV) ownership untenable. Based on this study, an optimum configuration is recommended to provide a Level 3 dc quick charger for an intermittent service. The addition of batteries and FCs is meant to increase load leveling, improved reliability, and instill limited island capability..