Induction Work Roll Heating System - Flatness Control with Edge Heating System or Full Width Work Roll Heating for Flatness and Complex Profile Control
In this file basic information regarding a sintering plant is shared.
sintering plant produce sinter for blast furnace feed.
Fine iron ore isn't usable for blast furnace .
So,it feeds to sintering plant.
Then sinter feeds to blast furnace as a charging material in addition to coke,additive,iron ore.
Induction Work Roll Heating System - Flatness Control with Edge Heating System or Full Width Work Roll Heating for Flatness and Complex Profile Control
In this file basic information regarding a sintering plant is shared.
sintering plant produce sinter for blast furnace feed.
Fine iron ore isn't usable for blast furnace .
So,it feeds to sintering plant.
Then sinter feeds to blast furnace as a charging material in addition to coke,additive,iron ore.
A Rotary kiln is a pyroprocessing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include: Cement. Lime.
Pelletization of iron ores and the type of wear liners used in thier eqipmentsGulshan Kumar Singh
Now a days about 60% of iron ore converted to fines during mining, handling and transporting so pellet is a process of utilizing iron ore fines up to size of 0.15 microns. i investigate its process,equipment used in process, wear and other problems in them and its future scope
I have tried to explain some very important but basic definitions related to Roll Pass Design. I am very grateful to my mentor, my friend Mr. Mark J. Schwietzer, without whose help it was not possible for me to make this presentation, thank you Mark :)
Steel industries have been an integral addition to India’s economic scenario as they have not only added gross profit to the national fund but also have enhanced employment options significantly. There are many steels rolling mills manufacturers, steel plants suppliers and steel melting plants in India that makes up this particular industry. These steel rolling mill plants have become an important part of any steel industry. As steel is the most widely used metal in today’s world, it is an integral manufacturing material in number of industries.
Mumbai University.
Mechanical Engineering
SEM III
Material Technology
Module 5
Effect of Alloying Elements in Steels:
Limitation of plain carbon steels, Significance of alloying elements, Effects of major and minor constituents, Effect of alloying elements on phase transformation Classification of tool steels and metallurgy of tool steels and stainless steel
A Rotary kiln is a pyroprocessing device used to raise materials to a high temperature (calcination) in a continuous process. Materials produced using rotary kilns include: Cement. Lime.
Pelletization of iron ores and the type of wear liners used in thier eqipmentsGulshan Kumar Singh
Now a days about 60% of iron ore converted to fines during mining, handling and transporting so pellet is a process of utilizing iron ore fines up to size of 0.15 microns. i investigate its process,equipment used in process, wear and other problems in them and its future scope
I have tried to explain some very important but basic definitions related to Roll Pass Design. I am very grateful to my mentor, my friend Mr. Mark J. Schwietzer, without whose help it was not possible for me to make this presentation, thank you Mark :)
Steel industries have been an integral addition to India’s economic scenario as they have not only added gross profit to the national fund but also have enhanced employment options significantly. There are many steels rolling mills manufacturers, steel plants suppliers and steel melting plants in India that makes up this particular industry. These steel rolling mill plants have become an important part of any steel industry. As steel is the most widely used metal in today’s world, it is an integral manufacturing material in number of industries.
Mumbai University.
Mechanical Engineering
SEM III
Material Technology
Module 5
Effect of Alloying Elements in Steels:
Limitation of plain carbon steels, Significance of alloying elements, Effects of major and minor constituents, Effect of alloying elements on phase transformation Classification of tool steels and metallurgy of tool steels and stainless steel
Analysis on financial performance of RSRMAbu Nahiyan
Keeping pace with globalization, Bangladesh is experiencing rapid infrastructural development. In this situation iron & steel industry has a bright growth prospect & Ratanpur Steel Re-Rolling Mills Ltd. is pioneer in this industry. The slogan of the RSRM is “Steel for the nation”.
In this competitive market RSRM using most advanced and latest technology suitable for the production of Termo–Mechanically Treated (TMT) reinforcement bar renowned worldwide for its special features of having strength with high elongation percent and toughness which is not possible in other ordinary reinforcement bars of conventional processes.
Ratanpur Steel Re-Rolling Mills Ltd. was incorporated in Bangladesh as private limited company on 22 April, 1986 as company limited by shares under the Companies Act, 1913 and converted into public limited company on 26 June 2012 under the Companies Act, 1994. The Company is engaged in the manufacturing process of producing various grades of M.S. Deformed Bar (300W/40 Grade, 400W/60 Grade and 500W/TMT) from M.S.Billet and sakes/export of the products and other business related thereto. The Company has set up its Re-Rolling Mills factory at 176, BaizidBostami I/A, BaizidBostami road, Nasirabad, Chittagong, and commenced commercial production from 1986. The Company is listed with Dhaka Stock Exchange (DSE) and Chittagong Stock Exchange (CSE) as a publicly quoted company. Trading of the shares of the company started in two stock exchanges from 22 September 2014.
This is a slide from which you all can find the marketing strategy of Ratanpur Steel Re-rolling Mills (RSRM). Under this marketing strategy I have discussed the 4 p's and I have developed some hypothesis based on a problem statement and i have also given some recommendation based on those hypothesis problem.
Steel Making and Rolling (Metalworking): Process & Applications, Rod and Bar...Ajjay Kumar Gupta
The steel industry has taken note of the continued growth in steel imports and a number of projects have been planned and are under implementation.In rolling mills, intermediate steel products are given their final shape and dimension in a series of shaping and finishing operations. Rolling of steel is one of the most important manufacturing processes for steel. It is usually the first step in the processing of steel after it is made and cast either in Ingot or continuous cast product in a steel melting shop.
See more
http://goo.gl/lUUh86
http://goo.gl/fSIHG7
http://goo.gl/4os7IE
http://www.entrepreneurindia.co/
Tags
Business guidance for steel rolling industry, Business Plan for a Startup Business, Business plan for steel rolling mill, Business start-up, Fusion welding processes, Great Opportunity for Startup, Hot rolled steel properties, Hot rolling mill process, Hot Rolling Mill, Hot Rolling mill, Hot Strip Mill, How is Steel Produced, How to Start a Steel Production Business, How to start a successful steel rolling business, How to start steel mill industry, How to Start Steel rolling Industry in India, How to start steel rolling mill, Indian Steel Industry, Industrial steel rolling mill, Modern steel making technology, Most Profitable Steel Business Ideas, New small scale ideas in Steel rolling industry, Opportunity Steel Rolling Mill, Plate Mill, Process & Applications, Process of steelmaking, Profitable small and cottage scale industries, Progress and Prospect of Rolling Technology, Project for startups, Rod and Bar Rolling, Rod and bar rolling, Rolling Metalworking, Rolling Mill for Steel Bars, Rolling process, Setting up and opening your steel rolling Business, Small scale Commercial steel rolling business, Small Scale Steel rolling Projects, Small Start-up Business Project, Start a Rolling Mill Industry, Start steel rolling mill in India, Starting a Steel Business, Starting a Steel rolling Business, Starting Steel Mini Mill, Start-up Business Plan for steel rolling, Startup Project for steel rolling business, Steel and hot rolling Business, Steel Based Profitable Projects, Steel Based Small Scale Industries Projects, Steel business plan, Steel hot rolling process, Steel Industry in India, Steel making and rolling, Steel making Projects, Steel making technology, Steel Making, Steel manufacturing process, Steel mill process, Steel mill, Steel production process, Steel rerolling mill feasibility start up, Steel rolling Industry in India, Steel rolling machine factory, Steel rolling mill industry demand, Steel rolling mill industry overview, Steel rolling mill industry, Steel rolling mill market forecast, Steel rolling mill market growth, Steel rolling mill market, Steel rolling mill size, Steel rolling mill starts production, Steel rolling mill, Steel Rolling Technology, Steelmaking, Steelmaking Processes, Types of rolling mills
A boiler is a combination of systems and equipment in which chemical energy is converted into thermal energy, which is then transferred to working fluid, so as to convert it into steam at high temperature and pressure.
Corrosion is a relevant problem caused by water in boilers. Corrosion can be of widely varying origin and nature due to the action of dissolved oxygen, to corrosion currents set up as a result of heterogeneities on metal surfaces, or to the iron being directly attacked by the water.
While basic corrosion in boilers may be primarily due to reaction of the metal with oxygen, other factors such as stresses, acid conditions, and specific chemical corrodents may have an important influence and produce different forms of attack.
I have completed my summer training at BHEL power plant at Bawana. This plant is overhanded by BHEL northern region,It is design to produce the 1500 MW electricity for supply to the DELHI and DELHI -NCR.. plant is combined cycle gas power plant that is integrated to the heat power plant that is work on the Rankine cycle. i have train under experienced senior engineers.✌
Honest Reviews of Tim Han LMA Course Program.pptxtimhan337
Personal development courses are widely available today, with each one promising life-changing outcomes. Tim Han’s Life Mastery Achievers (LMA) Course has drawn a lot of interest. In addition to offering my frank assessment of Success Insider’s LMA Course, this piece examines the course’s effects via a variety of Tim Han LMA course reviews and Success Insider comments.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
The Roman Empire A Historical Colossus.pdfkaushalkr1407
The Roman Empire, a vast and enduring power, stands as one of history's most remarkable civilizations, leaving an indelible imprint on the world. It emerged from the Roman Republic, transitioning into an imperial powerhouse under the leadership of Augustus Caesar in 27 BCE. This transformation marked the beginning of an era defined by unprecedented territorial expansion, architectural marvels, and profound cultural influence.
The empire's roots lie in the city of Rome, founded, according to legend, by Romulus in 753 BCE. Over centuries, Rome evolved from a small settlement to a formidable republic, characterized by a complex political system with elected officials and checks on power. However, internal strife, class conflicts, and military ambitions paved the way for the end of the Republic. Julius Caesar’s dictatorship and subsequent assassination in 44 BCE created a power vacuum, leading to a civil war. Octavian, later Augustus, emerged victorious, heralding the Roman Empire’s birth.
Under Augustus, the empire experienced the Pax Romana, a 200-year period of relative peace and stability. Augustus reformed the military, established efficient administrative systems, and initiated grand construction projects. The empire's borders expanded, encompassing territories from Britain to Egypt and from Spain to the Euphrates. Roman legions, renowned for their discipline and engineering prowess, secured and maintained these vast territories, building roads, fortifications, and cities that facilitated control and integration.
The Roman Empire’s society was hierarchical, with a rigid class system. At the top were the patricians, wealthy elites who held significant political power. Below them were the plebeians, free citizens with limited political influence, and the vast numbers of slaves who formed the backbone of the economy. The family unit was central, governed by the paterfamilias, the male head who held absolute authority.
Culturally, the Romans were eclectic, absorbing and adapting elements from the civilizations they encountered, particularly the Greeks. Roman art, literature, and philosophy reflected this synthesis, creating a rich cultural tapestry. Latin, the Roman language, became the lingua franca of the Western world, influencing numerous modern languages.
Roman architecture and engineering achievements were monumental. They perfected the arch, vault, and dome, constructing enduring structures like the Colosseum, Pantheon, and aqueducts. These engineering marvels not only showcased Roman ingenuity but also served practical purposes, from public entertainment to water supply.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
1. Bangladesh Steel Re-Rolling Mill
(BSRM)
HASAN SHAHRIAR SAJIB
Studying B.Sc. Engineering
Mechanical Engineering
Bangladesh University of Engineering & Technology (BUET)
1
2. STEEL SECTOR IN BANGLADESH
Bangladesh has more than 400 steel mills
Total production capacity 80 lakh tons
Country demand 40 lakh tons
Steel consumption 25 kg/capita
Leading steel companies: BSRM, KSRM, AKS, RSRM, GPH, PHP etc.
BSRM and AKS provide 50% of country demand
2
3. INDUSTRY OVERVIEW: BSRM
First fully automated Re-rolling mill in Bangladesh
Operated since 1952
Was sister concern of Meghna Engineering Works Ltd
BSRM Steels Ltd. Started operation since April 1,2008
Initial production 3.75 lakh tons per year
At present production is about 7 lakh tons per year
Industry was fully conceptualized by Forni Industriali Bendotti (Italy) and
Denieli group (Belgium)
3
4. INDUSTRY OVERVIEW: BSRM
Main product in Xtreme 500w, also produces 400w, 300w, 200w, 60 grade, 40 grade
1984 Introduced high strength cold-twisted steel bars to the
construction industry.
1987 Introduced ASTM 615 grade 60 reinforced steel bars.
1996 Commissioned the largest billet making plant in the country.
2006 Introduced micro reinforcement wires for low cost rural
construction.
2008 Introduced grade 500 steel bars, the current international standard
for modern construction-BSRM Xtreme 500 W.
2008 BSRM group contributed nearly tk.100 crores to the national
exchequer in taxes, levies, duties and vat.
2009 The largest billet making plant of the country nears completion
4
5. THE ADMINISTRATIVE INFRASTRUCTURE OF
BSRM STEELS LIMITED
The entire work schedule of the industry
is divided into 11 departments. They
are:
Accounts
Admin
HR and IR (Human Resources and
Industrial Relationship)
Inventory
CSD (Customer Service and
Development)
Production Department
workshop
Electrical
Mechanical
QA (Quality Assurance) and
T&D (Technical and Development
5
7. WATER TREATMENT PLANT (WTP)
WTP supplies required water in the mill, and treats the used water for re-
circulation
Two types of water used-
• Contact (used in mill)
• Non-contact water ( used in QTB and heat exchanger)
Total pumps: 31
Total filter: 5
• 3 sand filters (used for filtering Contact water)
• 2 anthracite filters (used foe removing iron particles)
7
9. WATER TREATMENT PLANT (WTP)
Water filtration process: 3
• Manual
• Chemical
• Filtering
Backwash method is done in every 8 hours for removing scale from filter
Chemical used : NaOCl, anti corrosive chemical, coagulants, dispersants etc.
Cooling tower:
• total 7, forced induced drafts
• Reduces temperature almost 8 degree Celsius
• Total capacity : 3000 m3/hr.
9
10. FURNACE
Furnace type:
Pusher Billet type Re-heating Furnace
Dimension:
• Length: 22m
• Width - 15m
• Height - 7m
Burner number: Total 22
• 10 in heating zone, 12 in soaking zone
Air-Fuel ratio: 10:1
Fuel used:
Duel fuel:
• Natural Gas
• Light Diesel Oil (LDO)
Pressure: 0.3 bar
Temperature: 1200 degree Celsius
10
11. FURNACE
3 zones:
• Pre-heating zone (billets are heated by pre-heated air up to 400˚ C)
• Heating zone (billets are further heated up to 1200˚ C)
• Soaking zone ( maintains the temperature gained in heating zone)
Peel bar :
Used to push the billet out of furnace
Billet detector ;
2 billet detectors are used for positioning the billets inside the furnace
Recuperator:
Used to pre heat air
11
12. MILL AREA
Heated billet goes through a shape changing process by rolling
Two types of rolling stand:
• Vertical: 8
• Horizontal: 12
Three area:
• Roughing area: 8 stands
• Intermittent area: 6 stands
• Finishing area: 6 stands
Looper: max. 6 (use to reduce tension of heated rod)
Slitter: use to split the billet for less dia. rod
12
13. MILL AREA
QTB (Quenching and Tempering Bath)
Use for uniform cooling of heated rod
Martensite formation
Direct contact of water, rapid cooling
Temperature is reduced by 200̊̊ C
Shear Machine:
Detach the billet in head & tail position
Three shear machine
• Shear 1 (between stand 6&7, cuts the head portion)
• Shear 2 (between stand 12&13, cuts the tail portion)
• Shear 3 (placed after QTB, cuts the billets according the cooling bed size)
13
14. FINISHING AREA
The quenched rod after shear-3 moves through here
The main components operating in Finishing Area are:
• Inclined Apron Roller Table
• Cooling Bed
• Cold Shear
• Tying Machine
Inclined Apron Roller Table
• 72 motor-driven rollers: imparts motion to the discontinuous rods
• 71 Lifting Aprons: shifts the rods lengthwise to the cooling bed
• 5 interconnected hydraulic cylinders: controlling simultaneous opening and
closing of the aprons
• 3 Magnetic Stoppers: stops the rods moving at high velocity
14
15. FINISHING AREA
Cooling Bed
Two types of racks; Fixed and Movable: shifts the rods along transverse direction
These Movable jaws are driven by a single motor.
Two gear boxes having worm gear transmits power from motor.
Eccentric cylindrical cams are connected in series in the driven shafts.
Cams have counterweight adjusted at 180 degree.
Hydraulically driven arms transfer the rods from the cooling bed to a rolling trolley
The rolling trolley transfers them in their longitudinal direction to Cold Shear
Belt pulley
15
16. FINISHING AREA
Layer Chain Transfer
Vertical Chain Transfer
Tying Machine
Tying Machine:
• 5.5mm wire is spool fed
• Hydraulic Mechanism with Hydraulic Motor ,oil storage tank for hydraulically
driven small rollers or flap.
• 8 steps controlled either automatically or manually
1. Feed wire- by hydraulic motor.
2. Clamp wire- by hydraulic cylinder.
3. Binding unit up- by hydraulic cylinder.
4. Stretch wire- by reversing hydraulic
motor.
5. Twist knot- by hydraulic motor.
6. Wire clamping off- by hydraulic cylinder.
7. Reset twisting head- by hydraulic motor.
8. Binding unit down- by hydraulic cylinder.
16
17. OVERHEAD CRANE
4 Bays
12 Overhead Cranes
Magnetic Type
A-B Bay :
• 3 cranes
• Girder Capacity: 29 tons
• Lifting Capacity: 8 tons
B-C Bay:
• 4 cranes
• Girder Capacity: 24 tons
• Lifting Capacity: 8 tons
C-D Bay:
• 3 cranes
• two of 10 tons, one of 20 tons
D-E Bay:
• 2 cranes
• 10 tons and 20 tons
17
18. OVERHEAD CRANE
Types of Motions:
1. Long Travel
2. CROSS travel
3. Hoisting Travel (Lifting and lowering)
4. Rotational Travel
5. Telescopic motion (A-B Bay only)
1.
2.
3.
18
19. UTILITIES
Supports the entire mill to run smoothly.
Consists of :
• Hydraulic drive system
• Pneumatic drive system
• Lubrication system
• Greasing system
Hydraulic Drive System
4 central hydraulic unit
Furnace central hydraulic unit
• Used in driving pusher & peel bar.
Milling central hydraulic unit
• Used in driving pinch roll, chain transfer system, hood(up-down movement)
Finishing area central hydraulic unit
• Used in movement of QTB, apron lifting operation, tying machine.
Workshop central hydraulic unit
• Assembly operation of Robot, band saw up-down.
19
20. UTILITIES
Hydraulic system contains
• Tank
• Hydraulic oil( vg46 or vg68)
• Energy Converters
• Control Devices
• Accessories (Float valve, Accumulator etc.)
• Connecting device
• Electrical & Electronic components
20
21. UTILITIES
Pneumatic drive system
Application:
• Peel bar upper pinch roll
• Peel bar entry door
• Furnace exit upper pinch roll
• Billet Detector
• Looper roller up-down
Pneumatic system contains
• Compressor
• Drier
• Receiver
• FRL( Filter-Pressure Regulator-Lubricator)
• Control Valves
• Actuators
21
22. UTILITIES
Lubrication
Force lubrication is used in this industry
Has 3 units
• Roughing Stand Lubrication Unit
• Intermediate Mill Lubrication Unit
• Finishing Stand Lubrication Unit
Lubrication system contains
Reservoir
Pump
Heat Exchanger( Remove moisture content)
Filter( Remove metal & dirt particles)
Lubrication oil(vg 220)
22
23. UTILITIES
Greasing system
Grease generally consists of a soap emulsified with vegetable oil.
A central grease unit is present to pump grease into required places keeping
the time gap to 30 minutes.
Has 3 greasing units
• Rolling Mill Central greasing unit
• Finishing Area greasing unit
• Shear 1 greasing unit
• Cold shear central greasing unit
23
24. BENDING MACHINE
Bending machine is used to bend 12 m rods into 6 m rods for carrying in trucks
Driven by electric motoring
4 rollers to bend the rods smoothly.
A rotating jaw bend the rods.
A movable arm driven by pneumatic power helps to slide the rods into delivery
chain transfer
9 men are required to work on a Binding machine
• 3 for counting
• 3 for tying
• 3 for delivery
24
25. QUALITY ASSURANCE (QA)
Main Purpose is to ensure the product quality.
BSRM always try to improve product quality with best techniques of the world.
They ensure ISO 9001:2000
One set of rebar is checked in every hour.
For 500W
• Yield strength is 500MPa.
• Ratio of tensile and ultimate strength is not more than 1.15
Testing Instruments:
• Bar bending mandrel
• CNC roll turning lathe
• Universal testing machine
• Computer attached with UTM
• Spectrometer
• Microscope
25
26. REBAR
Three layers
• Martensitic case
• Transition zone
• Ferrite-Pearlite core
Martensitic case provides hardness of steel.
Ferrite-Pearlite core provides ductility of steel.
Controlling the amount of water flow of QTB, we can control the marten site layer
thickness.
Martensitic layer should not be more than 40% of total rebar x-section area.
26
27. WORKSHOP
The workshop of BSRM is very much enriched. The performance of the workshop
machines makes the industry self- dependent. Excelled engineers and technicians
maintain the workshop.
The work shop instruments:
• Shear Machine
• CNC-Roller notching Machine
• CNC-Lathe Machine
• Manual Lathe Machine
• Bench Drill Machine
• Radial Drilling Machine
• Surface Grinding Machine
• Robot
27
28. WORKSHOP FACILITIES
Dressing of gear teeth
Surface grinding operation
Repairing mechanical equipment
Interchanging between horizontal and vertical stands
BSRM does all kind of repairing and maintaining works in their workshop. This saves a
large amount of money of the industry and enhances the profit.
28