1) The document discusses the analysis and design of a high rise building project submitted by Ishant Kukreja. It includes imposing wind and earthquake loads on the building and analyzing its structural behavior.
2) The structural elements like beams, columns, and shear walls are designed. Beam design, shear reinforcement, and column design results are presented.
3) Future prospects discussed include designing the structure for earthquake loads, designing a staircase, using a hybrid RCC and steel structure, and comparing cost. The project helps expand knowledge in high rise design and analysis considering important loads.
Shell structure, In building construction, a thin, curved plate structure shaped to transmit applied forces by compressive, tensile, and shear stresses that act in the plane of the surface.
A presentation that explains the various systems and techniques of employing steel and concrete to support long span structures. The range varies from conventional beams, to trusses and portal frames.
Shell structure, In building construction, a thin, curved plate structure shaped to transmit applied forces by compressive, tensile, and shear stresses that act in the plane of the surface.
A presentation that explains the various systems and techniques of employing steel and concrete to support long span structures. The range varies from conventional beams, to trusses and portal frames.
One of the most efficient structural systems against heavy wind loads is the bundled tube structural system
The first person to implement the bundled tube structural system was Fazlur Rahman Khan from Dhaka, Bangladesh with the design of the DeWitt-Chestnut Apartments in Chicago, Illinois.
High Rise Building Structure Systems Types
Slide Contents :
INTRODUCTION
INTRODUCTION TO HIGH-RISE DESIGN
DEMANDS FOR HIGH RISE BUILDING
MATERIAL
TYPES OF SYSTEMS
CONSTRUCTIONAL DETAILS
ADVANTAGES AND DISADVANTAGES
a space frame or space structure is a rigid, lightweight, truss-like structure constructed from interlocking struts in a geometric pattern. Space frames can be used to span large areas with few interior support
The bundled tube structure meant that "buildings no longer need be boxlike in appearance: they could become sculpture." Hybrids. Hybrids include a varied category of structures where the basic concept of tube is used, and supplemented by other structural support(s).
framed tube structure
structure tube furniture
structure tube canada
tube structural system
tube structure design
tube frame building kits
tube structure buildings
tube framed buildings
interesting civil engineering topics
civil engineering topics for presentation
seminar topics pdf
best seminar topics for civil engineering
civil seminar topics ppt
civil engineering seminar topics 2019
seminar topics for mechanical engineers
mechanical engineering seminar topics 2018
One of the most efficient structural systems against heavy wind loads is the bundled tube structural system
The first person to implement the bundled tube structural system was Fazlur Rahman Khan from Dhaka, Bangladesh with the design of the DeWitt-Chestnut Apartments in Chicago, Illinois.
High Rise Building Structure Systems Types
Slide Contents :
INTRODUCTION
INTRODUCTION TO HIGH-RISE DESIGN
DEMANDS FOR HIGH RISE BUILDING
MATERIAL
TYPES OF SYSTEMS
CONSTRUCTIONAL DETAILS
ADVANTAGES AND DISADVANTAGES
a space frame or space structure is a rigid, lightweight, truss-like structure constructed from interlocking struts in a geometric pattern. Space frames can be used to span large areas with few interior support
The bundled tube structure meant that "buildings no longer need be boxlike in appearance: they could become sculpture." Hybrids. Hybrids include a varied category of structures where the basic concept of tube is used, and supplemented by other structural support(s).
framed tube structure
structure tube furniture
structure tube canada
tube structural system
tube structure design
tube frame building kits
tube structure buildings
tube framed buildings
interesting civil engineering topics
civil engineering topics for presentation
seminar topics pdf
best seminar topics for civil engineering
civil seminar topics ppt
civil engineering seminar topics 2019
seminar topics for mechanical engineers
mechanical engineering seminar topics 2018
The lecture is in support of:
(1) The Design of Building Structures (Vol.1, Vol. 2), rev. ed., PDF eBook by Wolfgang Schueller, 2016: chapter 4.
(2) Building Support Structures, Analysis and Design with SAP2000 Software, 2nd ed., eBook by Wolfgang Schueller: chapter 13.
A technical approach to designing earthquake resistant buildings. Contains a brief overview of why a structure fails, building foundation problems and what are the possible solutions
This slide show depicts how rainwater harvesting has been accommodated in policy and legislation in India and specifically in the state of Karnataka. It gives example of projects in rural areas and in the city of Bangalore.
this presentation is about how you can make a building more resistant to earthquakes. Different techniques and designs are discussed to make a building more resistant to earthquakes. examples of different earthquake resistant buildings are also discussed.
Earthquake resistant building constructiondaspriyabrata3
1 INTRODUCTION
2 EARTHQUAKE THEORY
3 EARTHQUAKE MAGNITUDE AND ENERGY
4 EFFECTS OF EARTHQUAKES
5 MAJOR EARTHQUAKES
6 NOTABLE EARTHQUAKES AND THEIR ESTIMATED
MAGNITUDE
7 HOW EARTHQUAKE RESISTANT CONSTRUCTION IS
DIFFERENT
8 SEISMIC DESIGN PHILOSOPHY
9 EFFECT OF EARTHQUAKE ON REINFORCED CONCRETE BUILDINGS
10 ROLES OF FLOOR AND MASONRY WALLS SLABS
11 STRENGTH HIERARCHY
12 EARTHQUAKE RESISTANT BUILDING
13 EARTHQUAKE DESIGN PHILOSOPHY
14 REMEDIAL MEASURES TO MINIMISE THE LOSSES DUE TO EARTHQUAKES
15 EARTHQUAKE RESISTANT BUILDING CONSTRUCTION WITH REINFORCED HOLLOW CONCRETE BLOCK(RHCBM)
16 STRUCTURAL FEATURES
17 STRUCTURAL ADVANTAGES
18 CONSTRUCTIONAL ADVANTAGES
19 ARCHITECTURAL AND OTHER ADVANTAGES
20 STUDIES ON THE COMPARATIVE COST ECONOMICS OF RHCBM
21 MID-LEVEL ISOLATION 32-34
22 EARTHQUAKE RESISTANCE BUILDING USING SEISMIC ISOLATION SYSTEMS WITH SLIDING ON CONCAVE SURFACE
23 DESCRIPTION
24 CONCEPT OF FRICTION PENDULUM BEARING
25 SLIDING PENDULUM SEISMIC ISOLATION SYSTEM
26 BACKGROUND OF THE INVENTION
27 BRIEF SUMMARY OF THE INVENTION
28 DETAILED DESCRIPTION OF THE INVENTION
29 ESTIMATION
30 CONCLUSION
31 BIBLIOGRAPHY
In the present era the technology in communications has developed to a very large extent. The communication industries have seen a tremendous increase in last few years which have resulted in installation of large number of towers to increase the coverage area and network consistency. In wireless communication network these towers play a significant role hence failure of such structure in a disaster is a major concern. Therefore utmost importance should be given in considering all possible extreme conditions for designing these towers. In most of the studies, the researches have considered the effect of wind only on the four legged self-supporting towers. In this dissertation, a four legged lattice tower is analyzed and designed along with foundation details.
Basic points on earthquake resistant building
- Design considerations and different techniques employed to resist building from collapse during earthquake
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
3. AIM OF OUR
PROJECT..
Imposing Earthquake
and Wind loads on the
building.
Analyzing the behavior
of structure after
imposing earthquake and
wind loads.
Comparing the structures
on the basis of their
economy.
4. Introduction
Wind is essentially the large scale Horizontal
movement of free air. It plays an important role in
design of tall structures because it exerts loads on
Building.
High Rise Building-A building Having height more
then15m As per National Building Code 2005 of India
is called High Rise Building
5. The materials used for the structural system of high-
rise buildings are reinforced concrete and steel.
Most North American style skyscrapers have a steel
frame, while residential blocks are usually
constructed of concrete. There is no clear definition of
any difference between a tower block and a
skyscraper, although a building with fifty or more
storeys is generally considered a skyscraper.
High-rise structures pose particular design challenges
for structural and geotechnical engineers, particularl
y if situated in a seismically active region or if the
underlying soils have geotechnical risk factors such as
high compressibility
6. An earthquake is the vibration, sometimes
violent to the earth’s surface that follows a
release of energy in the earth’s crust. This
energy can be generated by a sudden
dislocation of segments of the crust, by a
volcanic eruption or even by a manmade
explosion.
In the process of breaking, vibrations called
seismic waves are generated. These waves
travel outward from the source of the
earthquake along the surface and through the
earth at varying speeds depending on the
material through which they move.
EARTHQUAKE LOADING:
7. The RC frame participates in resisting earthquake forces.
Earthquake shaking generates inertia forces in the
building, which are proportional to the building mass. Since
most of the building mass is present at the floor
levels, earthquake induced inertia forces primarily develop at
the floor levels.
These forces travel downward through slabs to beams, beams
to columns and walls and then to foundations from where
they are dispersed to the ground. As the inertia forces
accumulate downward from the top of the building, the
columns and walls at the lower storey experience higher
earthquake induced forces and are therefore designed to be
stronger than the storey above.
EFFECT OF EARTHQUAKE ON HIGH
RISE BUILDINGS:
8. PROGRESS
SO FAR…
• Reviewed papers on
high rise buildings.
• Designed the layout of
the building.
• Design of structural
elements manually.
• Detailing of structural
elements.
Previous Semeter
14. Analysis
STATIC LOAD/REACTION/EQUILIBRIUM SUMMARY FOR CASE NO. 1
LOADTYPE DEAD TITLE SELF
CENTER OF FORCE BASED ON Y FORCES ONLY (METE).
(FORCES IN NON-GLOBAL DIRECTIONS WILL INVALIDATE RESULTS)
TOTAL APPLIED LOAD ( KN METE ) SUMMARY (LOADING 1 )
SUMMATION FORCE-X = 0.00
SUMMATION FORCE-Y = -72098.50
SUMMATION FORCE-Z = 0.00
SUMMATION OF MOMENTS AROUND THE ORIGIN-
MX= 901231.18 MY= 0.00 MZ= -720985.43
15. Beam Design
B E A M N O. 80 D E S I G N R E S U L T S
M25 Fe415 (Main) Fe415 (Sec.)
LENGTH: 2857.1 mm SIZE: 300.0 mm X 500.0 mm COVER: 40.0
mm
SUMMARY OF REINF. AREA (Sq.mm)
SECTION 0.0 mm 714.3 mm 1428.6 mm 2142.9 mm 2857.1
mm
TOP 279.58 0.00 0.00 279.58 279.58
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
BOTTOM 279.58 279.58 279.58 279.58 0.00
REINF. (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm) (Sq. mm)
16. Shear R/F
SHEAR DESIGN RESULTS AT DISTANCE d (EFFECTIVE DEPTH)
FROM FACE OF THE SUPPORT
SHEAR DESIGN RESULTS AT 700.0 mm AWAY FROM START
SUPPORT
VY = -14.86 MX = 0.00 LD= 3
Provide 2 Legged 8í @ 300 mm c/c
SHEAR DESIGN RESULTS AT 700.0 mm AWAY FROM END
SUPPORT
VY = -19.24 MX = 0.00 LD= 4
Provide 2 Legged 8í @ 300 mm c/c
17. Column Design
C O L U M N N O. 1484 D E S I G N R E S U L T S
M25 Fe415 (Main) Fe415 (Sec.)
LENGTH: 3000.0 mm CROSS SECTION: 500.0 mm X 500.0 mm COVER:
40.0 mm
** GUIDING LOAD CASE: 3 END JOINT: 816 SHORT COLUMN
REQD. STEEL AREA : 2000.00 Sq.mm.
REQD. CONCRETE AREA: 248000.00 Sq.mm.
MAIN REINFORCEMENT : Provide 20 - 12 dia. (0.90%, 2261.95 Sq.mm.)
(Equally distributed)
TIE REINFORCEMENT : Provide 8 mm dia. rectangular ties @ 190 mm c/c
18. 1.) Design of the RCC structure by imposing
Earthquake and Wind loads.
2.) Design of staircase.
3.) Design of a hybrid structure consisting of RCC
and Steel structural elements.
5.) Cost estimation of the three structures on cost
estimator.
6.) Comparing the three structures on the basis of
economy.
FUTURE
PROSPECTS:
19. This topic which is design and analysis of high rise buildings
helps in expanding our knowledge in the field of design and
analysis. With incomes growing and large numbers of people
moving to urban areas, the demand for housing is on the
upswing. Due to high construction costs and non-availability of
land at preferred locations, people opt for apartments. Today’s
upwardly mobile live and work in high-rise buildings with
terraces and balconies overlooking the cityscape.
Moreover, designing the high rise structure for wind and
earthquake loads help us gaining thorough knowledge regarding
these loads as consideration of these loads is a must while
designing a high rise structure in a earthquake prone area.
USAGE OF THE
PROJECT IN
OUR CAREERS:
20. REFERENCES..
A.K CHOPRA for earthquake loads.
RCC design by N.PILAI.
Structural Analysis by hibbeler
RCC design by A.K Gupta