We have three kinds of paints .. 1. NT-600 Series : Industrial.. Heat Preservation and Heat Insulation Coating, Non-Flammable, Non-toxin, High temperature Resistant, non-corrosive for rust protection as per the enclosure. 2. NT-100/200 Series Anti-Corrosion Paint. Underwater painting. It can be applied directly over the rusty metal without removing the existing rust. It cures by reacting to moisture in the air. It can be applied to metal, concrete, masonry, wood, etc and provides a superior adhesion to the substrates. 3. Natural Touch, 1000 color paint for house, building and construction: Really huge market of paints applicable to any building materials, replacing wall paper with same kinds of design of wall paper.. emitting Anion and far-infrared light Non flammable, No VOC, fir proof, heat preservation and heat insulation ... Here is video Lists to verify Natural Toutch .. http://youtu.be/4-VaiNHewF8 : Natural Touch Mix7 Transparent Non-Flammable Paint Test on Al Plate 30 Min. http://youtu.be/-JgPUEnvm1U : Natural Touch Fire Proof and Heat Resistance Test with Aluminum http://youtu.be/zLe3R56KK68 : Rusted Metal Plate Coating without removal of rust http://youtu.be/zR91NW9cMk4 : Natural Touch Color Paint on the wood for the wall, pillar or Roof of house http://youtu.be/AEGfGQYLoXc : NT 600 Coated AlL Panel and the other fire proof paint coated AL Panel comparsn fire test http://youtu.be/1D0DgKTr4r0 : NT-600 Coated Nonflammable Styrofoam Panel Fire Proof Testing- 30 Min Fire Test http://youtu.be/LVAVYXaj3d0 : Underwater Painting and coating by Natural Touch Paint Please send us your profile and inquiry.. we will send you technical materials and price . We are looking for sales partner and distributor. Best Regards Frank Choi bbn@bbnworld.com

1. NATURAL
TOUCH
2014 PROJECT
INDUSTRIAL I

2. Introduction of Heat Insulation Coating
Eco Friendly Coating Materials : NT-600
Energy Saving
• Reduction of
Radiation Heat
• Fuel Saving
Enviro Improvement
• Worker Protection
• Eco Improvement
Economic Increase
• Quality Improvement
• Short ROI
에너지
(Energy)
환경
(Environment) 경제
(Economy)
Coating
Insulation

3. WORLD BEST ECO-FRIENDLY HEAT PRESERVING AND
INSULATION
- 3 -
3
Heat Preserving & Insulation Coating NT-
600

4. NT-600 Multi-purpose Heat reservation & Insulation Coating
Fireproof, non-toxic, hydro-insulating coating material mixed with 8 different types of ceramics and special
plastics, which is resistant to corrosion and mildew mold;
It can be coated on ducts or pipes of 540°C (the internal temperature) up to the thickness of 20 to 25mm
so that it will lower the external temperature up to 75 to 110°C
Features
thermal resistant temperature: 1500°C
reducing more than 35% of energy
no rusting on pipes due to dew condensation
no stopping factory lines to be treated
easy to maintain and repair
Application
outer coating on fireproof bricks
insulating high temperature and low temperature pipes
insulating pipe elbows and valves
color: dark grey (different colors available)
thickness after the treatment: 10mm-25mm after being coated more than twice
coverage of temperature: wide range of temperature from -250°C to 1500°C
thermosetting time: 14 days
interval between each coating: 2 hours
Dilution : water

5. 1. Concept of Heat Insulation Coating
Multipurpose : Heat Insulation, Workers Protection & Corrosion Proof
♦ Feature: workable on any materials(product) at below 400℃
♦ Working Temp: -25~600℃ ( Different effect of heat insulation on thickness)
♦ Materials : Air-encapsulated Ceramic and Special Acrylic Binder,
♦ Safety : Low-VOC, Non-toxic, Fire Proof, Very safe to use
Verification of Function by Various Method
♦ Strict KSF test of Weatherproof, Adhesive, Elasticity, Ultraviolet Safety, ETC
♦ Heat Insulation depends upon air pocket generated and durability
♦ Easy for maintenance and repair as a Heat Insulation Coating with unique
engineering data
♦ Most economic Heat Insulation, Fast solution & method for workers Protection
- 5 -

6. 2. Action Principle of Heat Insulation Materials
NT-600 uses Heat Transfer Principle like Conductivity, Convection, Radiation
and Reflection
♦ Fine Particle Structure of Pop-Corn like Spray Coating has the reflection
effect of over 85%
♦ Each Ceramic Particles keeping air help heat transfer very late
♦ Heat Transfer Coefficient of air is very low and drop significantly heat
transfer rate of surface
♦ The role to prevent corrosion and minimize heat transfer of coated
materials can be played simultaneously
Heat Reflection Heat Reflection
Each Particles are composed of
micro-particles of air encapsulated
- 6 -
Thermal barrier effect by
specific reaction when heat
transferring
Minimize Heat Floating
through surface

7. 3. Features of Insulation Coating
Corrosion Resistance Elasticity
- 7 -
No Pollution as Pure
Inorganic Materials
Endure Heat Transformation
Difficult to Disjoin
Endure High
Temperature
Inflammable
Nonflammable &
No Toxin Gas
Block Off Air to protect
corrosion of materials
High-Temp Resistance
Eco-Friendly
NT-600

8. 4. Application of Coating Insulation
Useful for Difficult Heat
Preservation Place
NT-600
- 8 -
Heating
Equipment
Boiler
Valve,
Flange
Dryer
Reactor Incinerator

9. 5. Merits of Coating Insulation
 Excellent Effect of Heat Insulation in Thin-Walled Section
 Prevent Burning of workers
 No harmful to human as non-toxin Materials
 Possible to Coat while facility is operating( under 400 C. Deg)
 Protect Corrosion Under Insulation
 Protect Dew Condensation
 High Solid Content and Low-VOC Products
 Easy to coat non-uniform surface
 Nonflammable Materials
 Adhesiveness, Elasticity, Excellent Retention of Heat insulation

10. Working Procedures of Insulation Coating
에너지
(Energy)
환경
(Environment)
경제
(Economy)
Coating
Insulation

11. 1. Property and Coating Procedures
Property
Working Condition
 Surface Temp : 60~400 ℃
- 1st /2nd : 1~3mm Coating ☞ Protect Sagging
- 3rd/4th : 4~7mm Coating ☞ after complete
drying of 1st / 2nd usually after 2 hours
- Talk with us when Temperature is over 400℃
 Thickness: If heat is insulated, No Limitation
 No working when heavy snow or heavy Rain
Cautious Points
before working
 Surface Treatment : Power Washing by Air
 Ferrous Surface : Pre-Cleaning before Heat
Insulation Coating. Should remove rust
 Non – Ferrous Surface : Possible direct coating
but should remove oil, stain, dust, etc.

12. 2. Hardening Time & Treatment, Storage Safety Rule
Hardening Time
온도(℃) 경화시간(Hr)
10~50 21
51~100 19
101~150 17
151~200 15
201~250 13
251~300 11
300이상 9
Packing, Handling,
Storage
 Gross (Net )Weight : 16(15)kgs/22ℓ
 Flash Point : N.A.
 Storage
- Keeping at over 15℃
- Avoid Direct Light
- Storage Time Should be short
 Expiration : 1 year after Production
 Caution : Should not be frozen
Safety Rule
When Working
 Should ware Safety Glasses, Mask.
- No Touch if Possible
- If touched, immediate wash by soap
 Need Ventilation in the Sealed Room
 Cloth : Safety Cloths and Gloves
Mixing & Dilution
Method
 Mixing: Paddle or Electric Mixer
 Dilution: No Need But if required,
Max. 10% is OK
 Packing : 22ℓ Plastic Can,
If Sealing is well, reusable.

13. Application of Heat Insulation Coating & Example
에너지절
감
(Energy)
환경개선
경제성향 (Environment)
상
(Economy)
Heat
Insulation
Coating

14. 1. Heat Insulation Coating Example (1)
Before Coating Temp : 185℃
< L Co. >
- Heat Insulation Coating for Energy
Efficiency improvement for Incinerator
- Effect : △T = 130℃
- Remarks : Coating directly on the Rusted
Surface without pre-cleaning
Heat Insulation Coating After Coating works : 55℃

15. 1. Heat Insulation Coating Works Example (2)
Advantages
Save Energy by maximizing Heat Reserve effect
Secure Workers Safety
Semi-permanently Usable
Corrosion Protection
No Harmful to human
Advantage to treat waste less expenses and faster
< L Co.>
- Heat Insulation Coating for Energy
Efficiency Improvement
- Effect : △T = 150℃
- Remarks : Coating directly on the
Rusted Surface without pre-cleaning
260℃ before insulation coating 110℃ after heat insulation coating

16. 1. Heat Insulation Coating Works Example (3)
170℃ before coating on Strainer
< L Co >
- Heat Insulation Coating for Energy
Efficiency Improvement
- Effect : △T = 125℃
- Remarks : Coating directly on the
rusted surface without pre-cleaning
Heat Insulation Coating on Strainer 45℃ after coating on Strainer

17. 1. Heat Insulation Coating Works Example (4)
180℃ before coating on Trap
Heat Insulation Coating on
Trap
55℃ after insulation coating on
trap
< L Co >
- Heat Insulation Coating for Energy
Efficiency Improvement
- Effect : △T = 125℃
- Remarks : Coating directly on the
rusted surface without pre-cleaning

18. 1. Heat Insulation Coating Works Example (5)
180℃ before coating on Flange
< L Co >
- Heat Insulation Coating for Energy
Efficiency Improvement
- Effect : △T = 130 ℃
- Remarks : Coating directly on the
rusted surface without pre-cleaning
Coating works on Flange 50 ℃ after coating on Flange