Presented By,
K.Iniya
 Nanotechnology is the development of
engineering processes at the atomic and
molecular level of matter.
 A Nanometer is one-billionth of a
meter, or ten hydrogen atoms placed
side by side.
 Nano robots are nano devices that will be
used for purposes of protecting the human
body against pathogens.
 The Main element used will be carbon in
the form of diamond or fullerene nano
composites.
 Many other Light elements such as oxygen
and nitrogen can be used for special
purposes.
 The powering of nano
robots can be done by
metabolizing local
glucose and oxygen for
energy.
 They will have simple
onboard computers
capable of performing
around thousand or
fewer computations
per second.
 Molecular NT device designs should
incorporate provisions for built-in
safety mechanisms,
 Absolute dependence
Dependent on Broadcast transmissions
 Subassemblies
do not function
independently.
 Address the
potential dangers
of MNT.
 The Design of medically-active
microscopic machines will be the
consequent result of techniques.
 The Feasibility of such achievements in
nano medicine are classified into two
primary capabilities for fabrication,
 Fabrication
 Assembly of nano scale parts
The Nano robots
lives in a world of
Viscosity.
The Gravitational
force here is very
Negligible.
In this world very
low Reynolds
number is
assumed for
Kinetic Energy.
 The Reynolds
Number is a
Conventional index.
 It provides a
convenient measure
of the laminar flow
characteristics of
fluid flow around a
moving Nano robots.
 Virtual reality was considered a suitable
approach for Nanorobot design
 The nano device design must be robust
enough to operate in an aqueous
environment.
 The Nanorobots use a macro
transponder navigational system for
Nanorobot positioning.
 The System might
involve external
signal from beacon
placed at fixed
position outside
the skin.
 The molecule can
be pumped by the
molecular sorting
rotors in
~10seconds.
 To cure skin disease.
 For Dental system.
 Work on immune
system.
 To prevent Heart
attacks.
 Life extension.
 Make surgical instruments so precision.
 Product could be vastly improved.
 It would require less material and less
pollution.
 Made something well beyond today’s
Medical Technology.
 Nanotechnology still resides in University
Laboratories and Government research
facilities.
 In Nanotechnology most of the work is
done to be in future. Only the concept has
been proposed.
 The Scientist are not making long promises
for this future.
Nano technology
Nano technology

Nano technology

  • 1.
  • 2.
     Nanotechnology isthe development of engineering processes at the atomic and molecular level of matter.  A Nanometer is one-billionth of a meter, or ten hydrogen atoms placed side by side.
  • 3.
     Nano robotsare nano devices that will be used for purposes of protecting the human body against pathogens.  The Main element used will be carbon in the form of diamond or fullerene nano composites.  Many other Light elements such as oxygen and nitrogen can be used for special purposes.
  • 4.
     The poweringof nano robots can be done by metabolizing local glucose and oxygen for energy.  They will have simple onboard computers capable of performing around thousand or fewer computations per second.
  • 5.
     Molecular NTdevice designs should incorporate provisions for built-in safety mechanisms,  Absolute dependence Dependent on Broadcast transmissions
  • 6.
     Subassemblies do notfunction independently.  Address the potential dangers of MNT.
  • 7.
     The Designof medically-active microscopic machines will be the consequent result of techniques.  The Feasibility of such achievements in nano medicine are classified into two primary capabilities for fabrication,  Fabrication  Assembly of nano scale parts
  • 8.
    The Nano robots livesin a world of Viscosity. The Gravitational force here is very Negligible. In this world very low Reynolds number is assumed for Kinetic Energy.
  • 9.
     The Reynolds Numberis a Conventional index.  It provides a convenient measure of the laminar flow characteristics of fluid flow around a moving Nano robots.
  • 10.
     Virtual realitywas considered a suitable approach for Nanorobot design  The nano device design must be robust enough to operate in an aqueous environment.  The Nanorobots use a macro transponder navigational system for Nanorobot positioning.
  • 11.
     The Systemmight involve external signal from beacon placed at fixed position outside the skin.  The molecule can be pumped by the molecular sorting rotors in ~10seconds.
  • 12.
     To cureskin disease.  For Dental system.  Work on immune system.  To prevent Heart attacks.  Life extension.
  • 13.
     Make surgicalinstruments so precision.  Product could be vastly improved.  It would require less material and less pollution.  Made something well beyond today’s Medical Technology.
  • 14.
     Nanotechnology stillresides in University Laboratories and Government research facilities.  In Nanotechnology most of the work is done to be in future. Only the concept has been proposed.  The Scientist are not making long promises for this future.