MILITARY RADAR.pptx
•Download as PPTX, PDF•
0 likes•143 views
Military radar is an important technology for early warning and weapon targeting functions. It is designed to be highly mobile to deploy within minutes. Some key types of military radar include primary radar like continuous wave radar, and secondary radar. Military radar provides all-weather detection capabilities and can handle multiple targets quickly. However, it also has disadvantages like latency in locking onto targets and difficulty with closely grouped large targets. Overall, military radar is a critical requirement for modern warfare to enable early detection of threats and accurate targeting.
Report
Share
Report
Share
Recommended
Military Radar
Radar stands for Radio Detection and Ranging. It is a system that transmits electromagnetic waves and analyzes the echoes from objects to detect and determine their range, altitude, direction or speed. The basic parts of a radar system include a transmitter, receiver, antenna and indicator. The radar equation describes the power returning to the receiving antenna based on factors like the transmitted power, antenna gains, radar cross section of the target, and distance. There are different types of radars like pulse radar, moving target indication radar, pulse Doppler radar and tracking radar used for various applications like air traffic control, missile guidance and ground surveillance.
Military radar
This document provides an overview of military radar systems. It begins with an introduction to radar and its basic principles of radio detection and ranging. It then describes the radar range equation and different types of radar systems including primary radar like continuous wave and pulse radar, as well as secondary radar. Applications of military radar are discussed, along with advantages such as all-weather capability and disadvantages including limited tracking abilities. The document concludes that military radars are important for early detection and targeting during wartime.
radar
The document discusses different types of radar systems and their components and principles of operation. It covers topics like pulse radar vs continuous wave radar, components of each type of system like transmitter, receiver, antennas, and how factors like pulse width, repetition frequency and power affect radar performance and capabilities. It also discusses modulation techniques, antenna beam formation, and different types of radar displays.
Electronic Warfare
Electronic Warfare Training Crash Course by TONEX
Electronic Warfare Training Crash Course sets up Electronic Warfare (EW) establishment intended for examiners, engineers, electrical specialists, venture directors, electronic warfare specialized experts who outline or work radar frameworks and electronic warfare frameworks; and anybody engaged with arranging, plan, investigation, reenactment, prerequisites definition, execution detail, obtainment, test, security and assessment of electronic assault hardware.
Electronic Warfare Training Crash Course depicts military activity including the utilization of electromagnetic (EM) and coordinated vitality (DE) to control the EMS or to assault the adversary. TONEX has been a pioneer in electronic warfare preparing administrations since 1992.
#Who Should Attend Electronic Warfare Course
Technical personnel
Electronic warfare or radar system planning, design, development, operations and maintenance
Electrical engineers
Software engineers
System engineers
System analysts
Cyber security professionals
Verification and validation personnel
Project managers
Program managers
#Learning Objectives
Endless supply of Electronic Warfare Training Crash Course, the participants can:
Rundown premise of Electronic Warfare (EW) ideas, engineering and methods
Investigate the utilization of electronic warfare ideas to ground, airborne and maritime surface warfare
Depict the key ideas of electromagnetic field hypothesis
Depict prorogation models, correspondence block and sticking execution expectation
Outline observable pathway (LOS), two-beam, and blade edge diffraction engendering models
Comprehend the essentials of radars and radar cross area
Portray EW and surveillance beneficiary framework configuration exchange off
Give cases of Directed vitality weapons and stealth
Depict how hunt and following radars work
Rundown the utilitarian and operational susceptibilities of weapon frameworks to electronic warfare
Comprehend Electronic Warfare Systems Engineering and System of Systems Engineering (SoSE) standards
Comprehend the application displaying, reproduction and net-driven engineering to electronic warfare.
#Course Agenda
What is Electronic Warfare (EW)?
Electronic Warfare principles
Overview of signals such as radio, infrared or radar
Electronic Warfare architecture
Naval EW
Ground EW
Airborne EW
Cyber EW
RF electronic warfare
Infrared Countermeasures
Visit Tonex website for more information about this course
https://www.tonex.com/training-courses/electronic-warfare-training-crash-course/
ppt on radar system
This document discusses key concepts in radar systems. It explains the differences between pulse transmission and continuous wave radars. It describes important parameters like pulse width, pulse repetition time, and pulse repetition frequency. It also discusses Doppler shift and how it is used in continuous wave radars. Additionally, it lists several factors that impact radar performance such as signal reception, beam width, antenna gain, and radar cross section of targets. Finally, it provides an overview of different types of radar antennas and their common applications.
Radar fundamentals
What is radar
Principle of radar
Block diagram
Radar functions
Electromagnetic spectrum
Coordinate system
Radar Basics
Radar uses radio waves to detect objects and determine their range, direction, and speed. It works by transmitting pulses of radio waves and receiving the echoes bounced back from objects. The time delay between transmission and reception is used to calculate distances to targets. Doppler radar uses the Doppler effect of radio waves to detect how fast targets are moving based on changes in frequency of the echoes.
RADAR
Radar uses radio waves to detect distant objects. It works by transmitting radio pulses and measuring their reflection off targets to determine range, angle, speed and other characteristics. There are two main types of radar: continuous wave radar which transmits a continuous radio signal, and pulsed radar which uses high power pulses. Radar has many applications including air traffic control, weather observation, speed enforcement, and military uses like air defense and missile guidance. It can operate in all weather conditions and is a vital detection system.
Recommended
Military Radar
Radar stands for Radio Detection and Ranging. It is a system that transmits electromagnetic waves and analyzes the echoes from objects to detect and determine their range, altitude, direction or speed. The basic parts of a radar system include a transmitter, receiver, antenna and indicator. The radar equation describes the power returning to the receiving antenna based on factors like the transmitted power, antenna gains, radar cross section of the target, and distance. There are different types of radars like pulse radar, moving target indication radar, pulse Doppler radar and tracking radar used for various applications like air traffic control, missile guidance and ground surveillance.
Military radar
This document provides an overview of military radar systems. It begins with an introduction to radar and its basic principles of radio detection and ranging. It then describes the radar range equation and different types of radar systems including primary radar like continuous wave and pulse radar, as well as secondary radar. Applications of military radar are discussed, along with advantages such as all-weather capability and disadvantages including limited tracking abilities. The document concludes that military radars are important for early detection and targeting during wartime.
radar
The document discusses different types of radar systems and their components and principles of operation. It covers topics like pulse radar vs continuous wave radar, components of each type of system like transmitter, receiver, antennas, and how factors like pulse width, repetition frequency and power affect radar performance and capabilities. It also discusses modulation techniques, antenna beam formation, and different types of radar displays.
Electronic Warfare
Electronic Warfare Training Crash Course by TONEX
Electronic Warfare Training Crash Course sets up Electronic Warfare (EW) establishment intended for examiners, engineers, electrical specialists, venture directors, electronic warfare specialized experts who outline or work radar frameworks and electronic warfare frameworks; and anybody engaged with arranging, plan, investigation, reenactment, prerequisites definition, execution detail, obtainment, test, security and assessment of electronic assault hardware.
Electronic Warfare Training Crash Course depicts military activity including the utilization of electromagnetic (EM) and coordinated vitality (DE) to control the EMS or to assault the adversary. TONEX has been a pioneer in electronic warfare preparing administrations since 1992.
#Who Should Attend Electronic Warfare Course
Technical personnel
Electronic warfare or radar system planning, design, development, operations and maintenance
Electrical engineers
Software engineers
System engineers
System analysts
Cyber security professionals
Verification and validation personnel
Project managers
Program managers
#Learning Objectives
Endless supply of Electronic Warfare Training Crash Course, the participants can:
Rundown premise of Electronic Warfare (EW) ideas, engineering and methods
Investigate the utilization of electronic warfare ideas to ground, airborne and maritime surface warfare
Depict the key ideas of electromagnetic field hypothesis
Depict prorogation models, correspondence block and sticking execution expectation
Outline observable pathway (LOS), two-beam, and blade edge diffraction engendering models
Comprehend the essentials of radars and radar cross area
Portray EW and surveillance beneficiary framework configuration exchange off
Give cases of Directed vitality weapons and stealth
Depict how hunt and following radars work
Rundown the utilitarian and operational susceptibilities of weapon frameworks to electronic warfare
Comprehend Electronic Warfare Systems Engineering and System of Systems Engineering (SoSE) standards
Comprehend the application displaying, reproduction and net-driven engineering to electronic warfare.
#Course Agenda
What is Electronic Warfare (EW)?
Electronic Warfare principles
Overview of signals such as radio, infrared or radar
Electronic Warfare architecture
Naval EW
Ground EW
Airborne EW
Cyber EW
RF electronic warfare
Infrared Countermeasures
Visit Tonex website for more information about this course
https://www.tonex.com/training-courses/electronic-warfare-training-crash-course/
ppt on radar system
This document discusses key concepts in radar systems. It explains the differences between pulse transmission and continuous wave radars. It describes important parameters like pulse width, pulse repetition time, and pulse repetition frequency. It also discusses Doppler shift and how it is used in continuous wave radars. Additionally, it lists several factors that impact radar performance such as signal reception, beam width, antenna gain, and radar cross section of targets. Finally, it provides an overview of different types of radar antennas and their common applications.
Radar fundamentals
What is radar
Principle of radar
Block diagram
Radar functions
Electromagnetic spectrum
Coordinate system
Radar Basics
Radar uses radio waves to detect objects and determine their range, direction, and speed. It works by transmitting pulses of radio waves and receiving the echoes bounced back from objects. The time delay between transmission and reception is used to calculate distances to targets. Doppler radar uses the Doppler effect of radio waves to detect how fast targets are moving based on changes in frequency of the echoes.
RADAR
Radar uses radio waves to detect distant objects. It works by transmitting radio pulses and measuring their reflection off targets to determine range, angle, speed and other characteristics. There are two main types of radar: continuous wave radar which transmits a continuous radio signal, and pulsed radar which uses high power pulses. Radar has many applications including air traffic control, weather observation, speed enforcement, and military uses like air defense and missile guidance. It can operate in all weather conditions and is a vital detection system.
Radar Presentation
- RADAR stands for Radio Detection and Ranging. It uses radio waves to determine the range, altitude, direction, or speed of objects.
- There are two primary types of radar: primary radar, which transmits its own signals and receives the echoes, and secondary radar, which receives transmitted signals from another source.
- Pulsed radar transmits high frequency pulses and measures the time it takes for the echo to return to determine the target's range. Continuous wave radar transmits a continuous radio signal.
1 radar basic - part ii
RADAR - RAdio Detection And Ranging
This is the Part 2 of 2 of RADAR Introduction.
For comments please contact me at solo.hermelin@gmail.com.
For more presentation on different subjects visit my website at http://www.solohermelin.com.
Part of the Figures were not properly downloaded. I recommend viewing the presentation on my website under RADAR Folder.
Radar communication 2
This document provides an overview of radar technology. It discusses key radar concepts like reflection, polarization, distance and speed measurement, positioning, and the radar equation. It also describes different radar frequency bands and specific radar systems like AESA, Doppler weather radar, cloud radar, NEXRAD, passive radar, pulse-Doppler radar, and synthetic aperture radar. Radar uses radio waves to detect and locate objects at a distance by transmitting pulses and analyzing the echo signal.
Lesson ssr
Secondary Surveillance Radar (SSR) uses transponders on aircraft to provide air traffic control with identification and altitude information of aircraft. SSR interrogates transponders which respond with coded pulses to provide distance, azimuth, and altitude of the aircraft. While SSR allows for identification of aircraft, it can be limited by multipath errors, sidelobe queries, garbling of overlapping responses, and false replies from other radars. Techniques like Sidelobe Suppression and filtering asynchronous responses aim to mitigate these effects.
Airborne radar
Airborne radar systems installed in aircraft can detect objects at long ranges and support air combat operations. There are four main types of airborne radar: radar altimeter to measure height above ground, weather radar to detect precipitation, terrain mapping radar, and ground moving target indication radar. Weather radar emits radio waves that reflect off rain droplets and snow crystals, displaying them in color-coded levels of reflectivity on the cockpit display. Pilots use controls to adjust the radar range, gain, and tilt to optimize weather detection and avoidance.
introduction to radar
Radar was originally developed for military purposes during World War 2 to locate ships and airplanes. Scientists later discovered that radar could also detect precipitation, leading to its widespread use today in weather prediction and analysis. The document discusses the history and components of pulse transmission and continuous wave radars. It also covers different types of radars like search, tracking, air surveillance and weather radars as well as radar antenna types including reflector and array antennas. The performance of radar is influenced by factors like frequency bandwidth, antenna size, transmitter power and propagation effects which determine appropriate frequency bands for different radar applications and ranges.
RADAR Basics
RADAR stands for Radio Detection and Ranging. It uses radio waves to determine the range, altitude, direction or speed of objects. The document discusses the basic principles and components of radar systems. It describes how pulsed radar works by transmitting pulses and calculating distance based on time of flight. Continuous wave radar is also covered, which can determine velocity using Doppler shift. Applications discussed include navigation, weather monitoring, air traffic control and military uses such as early warning systems and missile guidance.
Study of Radar System PPT
This document summarizes Atul Sharma's training report on studying radar systems during an internship from June 16th to July 26th 2014. It introduces radar technology, explaining that radar uses radio waves to detect objects and determine their location, distance and direction. It then describes the basic principles of how radar works, including the radar range equation. It also outlines the main components of a radar system, such as the antenna, transmitter, receiver and display, and different types of radars like primary and secondary radar. Finally, it provides examples of specific radar sets used in India.
Distance measuring equipment
Distance Measuring Equipment (DME) uses radio frequency signals to measure the distance between an aircraft and a ground station. The airborne DME unit includes a transmitter, receiver, timing circuits, and distance indicator. It sends interrogating signals to the ground station transponder, which includes a transmitter, decoder/encoder computer, receiver, and timing circuits. The DME calculates distance by measuring the round-trip travel time of signals and subtracting a fixed ground delay, then displays distance in nautical miles. DME allows pilots to determine their position by combining a VOR radial with a DME distance.
Radar ppt
Presentation of Basics of RADAR and its application.
presentation made is simple,easy to understand. Hope it helps you.. :) :)
Loran c Enav
Loran-C is a hyperbolic radio navigation system developed by the US Coast Guard. It works by measuring the difference in arrival time of radio signals transmitted from two synchronized stations. By obtaining time differences from multiple station pairs, a receiver can calculate its position on the globe. The system uses a network of transmission stations around the world to broadcast low frequency radio pulses that are precisely timed using atomic clocks. Loran-C provides positioning accuracy within a few miles and was an important maritime and aviation navigation system before being replaced by GPS.
Introduction to ELINT Analyses
This document provides an introduction to electronic warfare analyses. It discusses definitions of ELINT and EW terminology. It also covers topics like ELINT collection cycles, RF receiver characteristics, direction finding analysis, scan pattern analysis, and PRI analysis. The document puts these concepts together using examples of ESM concepts of operations and potential future ELINT threats that use techniques like LPI, frequency hopping, and spread spectrum.
Electronic Warfare ( EW ) Training Crash Course
The Electronic Warfare Training Crash Course is a 4-day training program that provides an introduction to key concepts in electronic warfare (EW) including EW principles, capabilities, functions, technology and modeling/simulation. The training is intended for technical personnel, engineers, analysts and managers involved in EW, radar and electronic systems. The course covers topics such as EW architecture, signals intelligence, radar fundamentals, electronic attack/protection capabilities and EW systems engineering. Participants will learn how EW concepts are applied to counter threats and control the electromagnetic spectrum.
Elint Interception & Analysis
This document provides a summary of a professional development short course on ELINT (Electronic Intelligence) Interception and Analysis. The course, taught by Dr. Richard G. Wiley, covers methods for intercepting radar and other non-communication signals, analyzing the signals to determine their functions and capabilities, and practical exercises. Participants receive a textbook on ELINT. The 4-day course outline covers topics like radar fundamentals, receiver types, direction finding techniques, emitter location, pulse analysis, and modern radar waveforms.
RADAR AND ANTENNA
Marine radars use radio waves to measure the bearing and distance of ships to prevent collisions at sea. They can detect ships within range of shore references like islands and buoys to aid navigation and position fixing. Radar works by transmitting radio wave pulses that bounce off objects and return to the radar antenna. The travel time is used to calculate distances to objects like other ships. Modern radar has diverse uses including air traffic control, weather monitoring, and target detection for military systems.
Presentation on stealth technology
The document discusses stealth technology, which reduces detection of aircraft using techniques like shaping the vehicle to deflect radar waves, embedding radar absorbing materials, and burying engines within wings. It provides details on the history of stealth beginning in Germany in WWII and its use in ships. Radar and infrared detection are also explained. The document outlines stealth techniques for aircraft including injecting ionized gas plumes and covering engines, as well as benefits like reduced casualties and military budget savings. Future applications and challenges of stealth technology are considered.
radar technology
This document provides an overview of radar systems. It discusses what radar is, the evolution of radar from its initial uses detecting objects with radio waves in the late 1800s. It then explains the basic principles of how radar works to detect objects using radio signal transmission and reflection. Key components of radar systems like transmitters, receivers, antennas and signal processing are described. Applications of radar systems include military, remote sensing, air traffic control, and navigation. The document also discusses radar modulators and antenna design considerations for radar.
Report on radar
This document discusses a new type of gated continuous wave (CW) radar that offers improvements over traditional gated CW radars. It operates using a pulsed transmit signal and gated receive path, along with a receiver bandwidth restricted to only the central frequency components of the received pulse spectrum. This new gated CW radar uses a Performance Network Analyzer in place of a vector network analyzer for higher data acquisition speeds and other enhancements. It provides better accuracy, circularity and lower cost than an equivalent pulsed intermediate frequency radar while maintaining the efficiency advantages of gated CW radars for indoor use.
UNMANNED AERIAL VEHICLES
The document provides an overview of unmanned aerial vehicles (UAVs), also known as drones. It discusses the history of UAVs beginning with early attempts in the 1910s and development that accelerated during World Wars I and II. The document describes the typical components of a UAV system and categories of UAVs based on range, altitude, and function, including reconnaissance, combat, logistics, and research. Examples of Indian UAV programs are provided, as well as various civilian and commercial uses of UAVs.
militaryradar-150415234344-conversion-gate01.pdf
This document provides an overview of military radar systems. It begins with an introduction to radar and its basic principles of radio detection and ranging. It then describes the radar range equation and different types of radar systems including primary radar like continuous wave and pulse radar, as well as secondary radar. Applications of military radar are discussed, along with advantages such as all-weather capability and disadvantages including limited tracking abilities. The document concludes that military radars are important for early detection and targeting during wartime.
militaryradar-140325073243-phpapp01.pdf
Radar stands for Radio Detection and Ranging. It is a system that transmits electromagnetic waves and analyzes the echoes from objects to detect and determine their range, altitude, direction or speed. The basic parts of a radar system include a transmitter, receiver, antenna and indicator. The radar equation describes the power returning to the receiving antenna based on factors like the transmitted power, antenna gains, radar cross section of the target, and distance. There are different types of radars like simple pulse radar, moving-target indication radar, pulse Doppler radar and tracking radar used for various applications like air traffic control, missile guidance and ground surveillance. Military radars have advantages like all-weather capability and rapid target detection that make them important for
More Related Content
What's hot
Radar Presentation
- RADAR stands for Radio Detection and Ranging. It uses radio waves to determine the range, altitude, direction, or speed of objects.
- There are two primary types of radar: primary radar, which transmits its own signals and receives the echoes, and secondary radar, which receives transmitted signals from another source.
- Pulsed radar transmits high frequency pulses and measures the time it takes for the echo to return to determine the target's range. Continuous wave radar transmits a continuous radio signal.
1 radar basic - part ii
RADAR - RAdio Detection And Ranging
This is the Part 2 of 2 of RADAR Introduction.
For comments please contact me at solo.hermelin@gmail.com.
For more presentation on different subjects visit my website at http://www.solohermelin.com.
Part of the Figures were not properly downloaded. I recommend viewing the presentation on my website under RADAR Folder.
Radar communication 2
This document provides an overview of radar technology. It discusses key radar concepts like reflection, polarization, distance and speed measurement, positioning, and the radar equation. It also describes different radar frequency bands and specific radar systems like AESA, Doppler weather radar, cloud radar, NEXRAD, passive radar, pulse-Doppler radar, and synthetic aperture radar. Radar uses radio waves to detect and locate objects at a distance by transmitting pulses and analyzing the echo signal.
Lesson ssr
Secondary Surveillance Radar (SSR) uses transponders on aircraft to provide air traffic control with identification and altitude information of aircraft. SSR interrogates transponders which respond with coded pulses to provide distance, azimuth, and altitude of the aircraft. While SSR allows for identification of aircraft, it can be limited by multipath errors, sidelobe queries, garbling of overlapping responses, and false replies from other radars. Techniques like Sidelobe Suppression and filtering asynchronous responses aim to mitigate these effects.
Airborne radar
Airborne radar systems installed in aircraft can detect objects at long ranges and support air combat operations. There are four main types of airborne radar: radar altimeter to measure height above ground, weather radar to detect precipitation, terrain mapping radar, and ground moving target indication radar. Weather radar emits radio waves that reflect off rain droplets and snow crystals, displaying them in color-coded levels of reflectivity on the cockpit display. Pilots use controls to adjust the radar range, gain, and tilt to optimize weather detection and avoidance.
introduction to radar
Radar was originally developed for military purposes during World War 2 to locate ships and airplanes. Scientists later discovered that radar could also detect precipitation, leading to its widespread use today in weather prediction and analysis. The document discusses the history and components of pulse transmission and continuous wave radars. It also covers different types of radars like search, tracking, air surveillance and weather radars as well as radar antenna types including reflector and array antennas. The performance of radar is influenced by factors like frequency bandwidth, antenna size, transmitter power and propagation effects which determine appropriate frequency bands for different radar applications and ranges.
RADAR Basics
RADAR stands for Radio Detection and Ranging. It uses radio waves to determine the range, altitude, direction or speed of objects. The document discusses the basic principles and components of radar systems. It describes how pulsed radar works by transmitting pulses and calculating distance based on time of flight. Continuous wave radar is also covered, which can determine velocity using Doppler shift. Applications discussed include navigation, weather monitoring, air traffic control and military uses such as early warning systems and missile guidance.
Study of Radar System PPT
This document summarizes Atul Sharma's training report on studying radar systems during an internship from June 16th to July 26th 2014. It introduces radar technology, explaining that radar uses radio waves to detect objects and determine their location, distance and direction. It then describes the basic principles of how radar works, including the radar range equation. It also outlines the main components of a radar system, such as the antenna, transmitter, receiver and display, and different types of radars like primary and secondary radar. Finally, it provides examples of specific radar sets used in India.
Distance measuring equipment
Distance Measuring Equipment (DME) uses radio frequency signals to measure the distance between an aircraft and a ground station. The airborne DME unit includes a transmitter, receiver, timing circuits, and distance indicator. It sends interrogating signals to the ground station transponder, which includes a transmitter, decoder/encoder computer, receiver, and timing circuits. The DME calculates distance by measuring the round-trip travel time of signals and subtracting a fixed ground delay, then displays distance in nautical miles. DME allows pilots to determine their position by combining a VOR radial with a DME distance.
Radar ppt
Presentation of Basics of RADAR and its application.
presentation made is simple,easy to understand. Hope it helps you.. :) :)
Loran c Enav
Loran-C is a hyperbolic radio navigation system developed by the US Coast Guard. It works by measuring the difference in arrival time of radio signals transmitted from two synchronized stations. By obtaining time differences from multiple station pairs, a receiver can calculate its position on the globe. The system uses a network of transmission stations around the world to broadcast low frequency radio pulses that are precisely timed using atomic clocks. Loran-C provides positioning accuracy within a few miles and was an important maritime and aviation navigation system before being replaced by GPS.
Introduction to ELINT Analyses
This document provides an introduction to electronic warfare analyses. It discusses definitions of ELINT and EW terminology. It also covers topics like ELINT collection cycles, RF receiver characteristics, direction finding analysis, scan pattern analysis, and PRI analysis. The document puts these concepts together using examples of ESM concepts of operations and potential future ELINT threats that use techniques like LPI, frequency hopping, and spread spectrum.
Electronic Warfare ( EW ) Training Crash Course
The Electronic Warfare Training Crash Course is a 4-day training program that provides an introduction to key concepts in electronic warfare (EW) including EW principles, capabilities, functions, technology and modeling/simulation. The training is intended for technical personnel, engineers, analysts and managers involved in EW, radar and electronic systems. The course covers topics such as EW architecture, signals intelligence, radar fundamentals, electronic attack/protection capabilities and EW systems engineering. Participants will learn how EW concepts are applied to counter threats and control the electromagnetic spectrum.
Elint Interception & Analysis
This document provides a summary of a professional development short course on ELINT (Electronic Intelligence) Interception and Analysis. The course, taught by Dr. Richard G. Wiley, covers methods for intercepting radar and other non-communication signals, analyzing the signals to determine their functions and capabilities, and practical exercises. Participants receive a textbook on ELINT. The 4-day course outline covers topics like radar fundamentals, receiver types, direction finding techniques, emitter location, pulse analysis, and modern radar waveforms.
RADAR AND ANTENNA
Marine radars use radio waves to measure the bearing and distance of ships to prevent collisions at sea. They can detect ships within range of shore references like islands and buoys to aid navigation and position fixing. Radar works by transmitting radio wave pulses that bounce off objects and return to the radar antenna. The travel time is used to calculate distances to objects like other ships. Modern radar has diverse uses including air traffic control, weather monitoring, and target detection for military systems.
Presentation on stealth technology
The document discusses stealth technology, which reduces detection of aircraft using techniques like shaping the vehicle to deflect radar waves, embedding radar absorbing materials, and burying engines within wings. It provides details on the history of stealth beginning in Germany in WWII and its use in ships. Radar and infrared detection are also explained. The document outlines stealth techniques for aircraft including injecting ionized gas plumes and covering engines, as well as benefits like reduced casualties and military budget savings. Future applications and challenges of stealth technology are considered.
radar technology
This document provides an overview of radar systems. It discusses what radar is, the evolution of radar from its initial uses detecting objects with radio waves in the late 1800s. It then explains the basic principles of how radar works to detect objects using radio signal transmission and reflection. Key components of radar systems like transmitters, receivers, antennas and signal processing are described. Applications of radar systems include military, remote sensing, air traffic control, and navigation. The document also discusses radar modulators and antenna design considerations for radar.
Report on radar
This document discusses a new type of gated continuous wave (CW) radar that offers improvements over traditional gated CW radars. It operates using a pulsed transmit signal and gated receive path, along with a receiver bandwidth restricted to only the central frequency components of the received pulse spectrum. This new gated CW radar uses a Performance Network Analyzer in place of a vector network analyzer for higher data acquisition speeds and other enhancements. It provides better accuracy, circularity and lower cost than an equivalent pulsed intermediate frequency radar while maintaining the efficiency advantages of gated CW radars for indoor use.
UNMANNED AERIAL VEHICLES
The document provides an overview of unmanned aerial vehicles (UAVs), also known as drones. It discusses the history of UAVs beginning with early attempts in the 1910s and development that accelerated during World Wars I and II. The document describes the typical components of a UAV system and categories of UAVs based on range, altitude, and function, including reconnaissance, combat, logistics, and research. Examples of Indian UAV programs are provided, as well as various civilian and commercial uses of UAVs.
What's hot (20)
Similar to MILITARY RADAR.pptx
militaryradar-150415234344-conversion-gate01.pdf
This document provides an overview of military radar systems. It begins with an introduction to radar and its basic principles of radio detection and ranging. It then describes the radar range equation and different types of radar systems including primary radar like continuous wave and pulse radar, as well as secondary radar. Applications of military radar are discussed, along with advantages such as all-weather capability and disadvantages including limited tracking abilities. The document concludes that military radars are important for early detection and targeting during wartime.
militaryradar-140325073243-phpapp01.pdf
Radar stands for Radio Detection and Ranging. It is a system that transmits electromagnetic waves and analyzes the echoes from objects to detect and determine their range, altitude, direction or speed. The basic parts of a radar system include a transmitter, receiver, antenna and indicator. The radar equation describes the power returning to the receiving antenna based on factors like the transmitted power, antenna gains, radar cross section of the target, and distance. There are different types of radars like simple pulse radar, moving-target indication radar, pulse Doppler radar and tracking radar used for various applications like air traffic control, missile guidance and ground surveillance. Military radars have advantages like all-weather capability and rapid target detection that make them important for
Militaryradar 140325073243 by Praveen- 9688579913
Radar stands for Radio Detection and Ranging. It uses electromagnetic waves to detect objects and determine their range, direction, or speed. The basic parts of a radar system include a transmitter, receiver, antenna, and indicator. The radar equation describes the power returning to the receiving antenna based on factors like the transmitted power, antenna gains, radar cross section of the target, and distance. Different types of radars include pulse, moving target indication, pulse Doppler, and tracking radars. Military radars have advantages like all-weather capability and rapid target detection that make them important for air defense, ground surveillance, and other defense applications.
Military Radar
Radar is a system that uses radio waves to detect objects and determine their range, direction, or speed. It works by transmitting electromagnetic waves and analyzing the echoes from objects. The first simple ship detection device was built by German inventor Christian Hülsmeyer in 1904.
A basic radar system consists of a transmitter that emits radio waves, a receiver, a duplexer, a radar antenna, and an indicator. The power returning to the receiving antenna from an object is calculated using the radar equation. Different types of radars include simple pulse radar, moving-target indication radar, pulse Doppler radar, tracking radar, and frequency-modulated continuous-wave radar.
Military radars have many applications including air
MILITARY RADARS.pptx
Military radar systems use radio waves to detect and track objects. They transmit electromagnetic waves that bounce off targets and analyze the echoes to determine an object's location, speed, and direction. Key components include a transmitter, receiver, antenna, and display. Common military radar types are moving target indication, pulse doppler, tracking, and frequency modulated continuous wave radars. They are used for air defense, missile control, air traffic control, ground surveillance, and navigation. Benefits are all-weather detection day and night, handling multiple targets, and rapid reaction times. Limitations include delays in locking onto targets and inability to track targets with rapid deceleration or close, large objects that can saturate the receiver.
Seminar(uwb)
Seminar on UWB(Ultra Wide Band)Radar system for Human being detection.Mainly for the advanced technologies Radar systems are developed.In 1940 American government has developed Radar for military purpose,and then the inventions in different field has emerged in respective aspects.Radars are use in many areas and its application is very large extent.
Military-Radar [Repaired].pptx
This document discusses military radar systems. It describes the key components of a radar system including the antenna, remote control, interrogator and shelter containing the display unit. It explains how radar works by transmitting radio pulses and measuring their reflection to determine a target's range and discusses how military radar is used to gather information on highly mobile targets. It provides details on the system configuration, equipment functions, and block diagrams. It also covers low probability of interception techniques and how radar can detect buried landmines.
Radar frequencies and applications completed
This document discusses radar frequencies and applications. It covers the different frequency bands used for radar from HF to millimeter wavelengths, and the characteristics of each band that make it suitable for certain radar applications. It then describes several common radar applications, including air traffic control, aircraft and ship navigation, remote sensing of weather and environment, law enforcement, military uses, and more. The frequency bands and applications covered provide an overview of the use of radar technology.
radar communication seminar powerpoint presentation
Radar communication is the use of electromagnetic waves to detect and analyze distant targets. Radar was originally developed for military use in World War II to locate ships and airplanes. It works by transmitting radio pulses toward a target and measuring the time it takes for the reflected pulse to return. There are different types of radar including pulsed radar and continuous wave radar. Radar has many applications including aircraft navigation, ship navigation, ground traffic control, remote sensing and more. It has advantages like all-weather target detection but also disadvantages like inability to recognize color and potential signal interruptions.
Radar communication
In this slide i had discussed about radar in brief. It is a basic introduction of radar communication.
Role of radar in microwaves
Radar relies on microwaves, with early developments in the 1880s by Hertz and JC Bose experimentally proving Maxwell's theory of electromagnetic waves. During World War II, research at MIT's radiation lab and the development of the magnetron by the Varian brothers allowed for high-power radar applications, helping the Allies gain advantage. Modern radar uses digital signal processing, phased array antennas, and devices like klystrons and TWTs, with future directions including jammer technologies, sea echo analysis, and millimeter wave radar.
radar technology and operation process.pptx
The document discusses different types of radar systems. It begins by introducing radar and its basic components and principles. It then describes continuous wave radar and its advantages of using simple circuitry but inability to determine range. Pulse radar is introduced as using high power pulses to determine range but can have ambiguities. Moving target indicator radar is described as using Doppler shifts to distinguish moving from stationary targets. Pulse Doppler radar is presented as using high pulse repetition frequencies to avoid Doppler ambiguities at the cost of potential range ambiguities. Applications including military surveillance radars are briefly covered.
Radar
Radar is an electronic system that uses electromagnetic signals to detect objects by transmitting signals and receiving echoes. It was invented in the early 1900s and widely used during World War 2. A radar works by transmitting a modulated signal that bounces off a target and is detected by the receiver. Radar is used for applications like air traffic control, navigation, weather sensing, and military purposes. New technologies aim to reduce radar detection through stealth materials and synthetic aperture radar.
Radar and it's applications
RADAR stands for Radio Detection And Ranging. It uses electromagnetic waves to identify the range, altitude, direction or speed of objects. Early forms of radar detected ships to avoid collisions. Modern radar is used for military defense, air traffic control, law enforcement, weather monitoring and more. Key components of a radar system include a transmitter, receiver, synchronizer and duplexer. Radar works by transmitting pulses and measuring the time it takes for the echo signal to return from an object.
radar
Radar uses radio waves to detect objects at a distance by transmitting pulses and measuring their reflection. It was developed for military use in World War 2 to locate ships and planes. There are two main types - pulse radar which measures distance using transit time of pulses, and continuous wave radar which relies on the Doppler effect. Radar has many applications including weather forecasting, air traffic control, and speed detection guns.
Integration of Radar, Acoustic, and Night Vision Monitoring of Bats at Wind P...
The document discusses different monitoring techniques used to study bats at wind power projects, including acoustic monitoring, night vision monitoring, and radar monitoring. It provides an overview of each technique, the challenges associated with each, and lessons learned from integrating multiple techniques. Acoustic monitoring relies on detecting ultrasonic calls, night vision uses low-light devices, and radar can track bat movements but has limitations discriminating bats from birds. Combining the techniques provides more comprehensive results, but bat monitoring generates large amounts of complex data that require significant analysis time.
Lidar
Lidar is an optical remote sensing technology that uses light (often from a pulsed laser) to measure distance. It works by illuminating a target with a laser and analyzing the reflected light. Common components of a lidar system include a laser, scanner/optics, photodetector, and receiver electronics. Lidar has advantages over radar like faster lock-on time and narrower beam spread. Applications include agriculture, mapping, oil/gas exploration, engineering, autonomous vehicles, and atmospheric sensing from aircraft or satellites. Recent advances include lidar speed guns, Google's driverless car which uses lidar for navigation, and autonomous cruise control systems using lidar.
ppt.pptx
Millimeter wave radar was the topic of the seminar. Key points include:
1) Millimeter wave radar operates within the frequency band of 10GHz-200GHz and has advantages over other sensors like microwave navigation and photoelectric detection.
2) It can detect objects at farther distances than other sensors due to weak atmospheric attenuation of millimeter waves.
3) Millimeter wave radar has applications in automotive, meteorology, and medical fields due to its ability to detect objects even in harsh weather or penetrate materials like fog, smoke and skin.
Multi-mission Phased Array Radar
MPAR is a proposed multi-mission phased array radar system that could provide weather surveillance, aircraft tracking, and air traffic control capabilities. It would consist of a 3-story structure with an array antenna on the top floor for electronic beam steering, data processing equipment on the middle floor, and maintenance equipment on the bottom floor. MPAR would offer advantages over traditional mechanically scanned radars like reduced costs, increased coverage area through electronic scanning, and improved reliability. The document concludes that MPAR shows promise as a cost-effective replacement for aging weather and aircraft tracking radar networks.
Radar ppt.pptx
Radar is an acronym for Radio Detection And Ranging. It uses electromagnetic waves to detect the position and movement of distant objects. Radar was originally developed for military use during World War II to locate enemy ships and planes. Today radar has many applications including weather monitoring, air traffic control, and police speed detection. It works by transmitting radio pulses and measuring their reflection off targets to determine the target's range, angle, and velocity.
Similar to MILITARY RADAR.pptx (20)
radar communication seminar powerpoint presentation
radar communication seminar powerpoint presentation
Integration of Radar, Acoustic, and Night Vision Monitoring of Bats at Wind P...
Integration of Radar, Acoustic, and Night Vision Monitoring of Bats at Wind P...
Recently uploaded
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
SCALING OF MOS CIRCUITS m .pptx
this ppt explains about scaling parameters of the mosfet it is basically vlsi subject
一比一原版(uofo毕业证书)美国俄勒冈大学毕业证如何办理
原版一模一样【微信：741003700 】【(uofo毕业证书)美国俄勒冈大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(uofo毕业证书)美国俄勒冈大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
Null Bangalore | Pentesters Approach to AWS IAM
#Abstract:
- Learn more about the real-world methods for auditing AWS IAM (Identity and Access Management) as a pentester. So let us proceed with a brief discussion of IAM as well as some typical misconfigurations and their potential exploits in order to reinforce the understanding of IAM security best practices.
- Gain actionable insights into AWS IAM policies and roles, using hands on approach.
#Prerequisites:
- Basic understanding of AWS services and architecture
- Familiarity with cloud security concepts
- Experience using the AWS Management Console or AWS CLI.
- For hands on lab create account on [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
# Scenario Covered:
- Basics of IAM in AWS
- Implementing IAM Policies with Least Privilege to Manage S3 Bucket
- Objective: Create an S3 bucket with least privilege IAM policy and validate access.
- Steps:
- Create S3 bucket.
- Attach least privilege policy to IAM user.
- Validate access.
- Exploiting IAM PassRole Misconfiguration
-Allows a user to pass a specific IAM role to an AWS service (ec2), typically used for service access delegation. Then exploit PassRole Misconfiguration granting unauthorized access to sensitive resources.
- Objective: Demonstrate how a PassRole misconfiguration can grant unauthorized access.
- Steps:
- Allow user to pass IAM role to EC2.
- Exploit misconfiguration for unauthorized access.
- Access sensitive resources.
- Exploiting IAM AssumeRole Misconfiguration with Overly Permissive Role
- An overly permissive IAM role configuration can lead to privilege escalation by creating a role with administrative privileges and allow a user to assume this role.
- Objective: Show how overly permissive IAM roles can lead to privilege escalation.
- Steps:
- Create role with administrative privileges.
- Allow user to assume the role.
- Perform administrative actions.
- Differentiation between PassRole vs AssumeRole
Try at [killercoda.com](https://killercoda.com/cloudsecurity-scenario/)
Blood finder application project report (1).pdf
Blood Finder is an emergency time app where a user can search for the blood banks as
well as the registered blood donors around Mumbai. This application also provide an
opportunity for the user of this application to become a registered donor for this user have
to enroll for the donor request from the application itself. If the admin wish to make user
a registered donor, with some of the formalities with the organization it can be done.
Specialization of this application is that the user will not have to register on sign-in for
searching the blood banks and blood donors it can be just done by installing the
application to the mobile.
The purpose of making this application is to save the user’s time for searching blood of
needed blood group during the time of the emergency.
This is an android application developed in Java and XML with the connectivity of
SQLite database. This application will provide most of basic functionality required for an
emergency time application. All the details of Blood banks and Blood donors are stored
in the database i.e. SQLite.
This application allowed the user to get all the information regarding blood banks and
blood donors such as Name, Number, Address, Blood Group, rather than searching it on
the different websites and wasting the precious time. This application is effective and
user friendly.
Open Channel Flow: fluid flow with a free surface
Open Channel Flow: This topic focuses on fluid flow with a free surface, such as in rivers, canals, and drainage ditches. Key concepts include the classification of flow types (steady vs. unsteady, uniform vs. non-uniform), hydraulic radius, flow resistance, Manning's equation, critical flow conditions, and energy and momentum principles. It also covers flow measurement techniques, gradually varied flow analysis, and the design of open channels. Understanding these principles is vital for effective water resource management and engineering applications.
AI-Based Home Security System : Home security
Home security is of paramount importance in today's world, where we rely more on technology, home
security is crucial. Using technology to make homes safer and easier to control from anywhere is
important. Home security is important for the occupant’s safety. In this paper, we came up with a low cost,
AI based model home security system. The system has a user-friendly interface, allowing users to start
model training and face detection with simple keyboard commands. Our goal is to introduce an innovative
home security system using facial recognition technology. Unlike traditional systems, this system trains
and saves images of friends and family members. The system scans this folder to recognize familiar faces
and provides real-time monitoring. If an unfamiliar face is detected, it promptly sends an email alert,
ensuring a proactive response to potential security threats.
smart pill dispenser is designed to improve medication adherence and safety f...
Smart Pill Dispenser that boosts medication adherence, empowers patients, enables remote monitoring, enhances safety, reduces healthcare costs, and contributes to data-driven healthcare improvements
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
This document serves as a comprehensive step-by-step guide on how to effectively use PyCharm for remote debugging of the Windows Subsystem for Linux (WSL) on a local Windows machine. It meticulously outlines several critical steps in the process, starting with the crucial task of enabling permissions, followed by the installation and configuration of WSL.
The guide then proceeds to explain how to set up the SSH service within the WSL environment, an integral part of the process. Alongside this, it also provides detailed instructions on how to modify the inbound rules of the Windows firewall to facilitate the process, ensuring that there are no connectivity issues that could potentially hinder the debugging process.
The document further emphasizes on the importance of checking the connection between the Windows and WSL environments, providing instructions on how to ensure that the connection is optimal and ready for remote debugging.
It also offers an in-depth guide on how to configure the WSL interpreter and files within the PyCharm environment. This is essential for ensuring that the debugging process is set up correctly and that the program can be run effectively within the WSL terminal.
Additionally, the document provides guidance on how to set up breakpoints for debugging, a fundamental aspect of the debugging process which allows the developer to stop the execution of their code at certain points and inspect their program at those stages.
Finally, the document concludes by providing a link to a reference blog. This blog offers additional information and guidance on configuring the remote Python interpreter in PyCharm, providing the reader with a well-rounded understanding of the process.
Software Engineering and Project Management - Introduction, Modeling Concepts...
Introduction, Modeling Concepts and Class Modeling: What is Object orientation? What is OO development? OO Themes; Evidence for usefulness of OO development; OO modeling history. Modeling
as Design technique: Modeling, abstraction, The Three models. Class Modeling: Object and Class Concept, Link and associations concepts, Generalization and Inheritance, A sample class model, Navigation of class models, and UML diagrams
Building the Analysis Models: Requirement Analysis, Analysis Model Approaches, Data modeling Concepts, Object Oriented Analysis, Scenario-Based Modeling, Flow-Oriented Modeling, class Based Modeling, Creating a Behavioral Model.
Mechatronics material . Mechanical engineering
Mechatronics is a multidisciplinary field that refers to the skill sets needed in the contemporary, advanced automated manufacturing industry. At the intersection of mechanics, electronics, and computing, mechatronics specialists create simpler, smarter systems. Mechatronics is an essential foundation for the expected growth in automation and manufacturing.
Mechatronics deals with robotics, control systems, and electro-mechanical systems.
Data Driven Maintenance | UReason Webinar
Discover the latest insights on Data Driven Maintenance with our comprehensive webinar presentation. Learn about traditional maintenance challenges, the right approach to utilizing data, and the benefits of adopting a Data Driven Maintenance strategy. Explore real-world examples, industry best practices, and innovative solutions like FMECA and the D3M model. This presentation, led by expert Jules Oudmans, is essential for asset owners looking to optimize their maintenance processes and leverage digital technologies for improved efficiency and performance. Download now to stay ahead in the evolving maintenance landscape.
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Sinan from the Delivery Hero mobile infrastructure engineering team shares a deep dive into performance acceleration with Gradle build cache optimizations. Sinan shares their journey into solving complex build-cache problems that affect Gradle builds. By understanding the challenges and solutions found in our journey, we aim to demonstrate the possibilities for faster builds. The case study reveals how overlapping outputs and cache misconfigurations led to significant increases in build times, especially as the project scaled up with numerous modules using Paparazzi tests. The journey from diagnosing to defeating cache issues offers invaluable lessons on maintaining cache integrity without sacrificing functionality.
一比一原版(osu毕业证书)美国俄勒冈州立大学毕业证如何办理
原版一模一样【微信：741003700 】【(osu毕业证书)美国俄勒冈州立大学毕业证成绩单】【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】外观非常简单，由纸质材料制成，上面印有校徽、校名、毕业生姓名、专业等信息。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】格式相对统一，各专业都有相应的模板。通常包括以下部分：
校徽：象征着学校的荣誉和传承。
校名:学校英文全称
授予学位：本部分将注明获得的具体学位名称。
毕业生姓名：这是最重要的信息之一，标志着该证书是由特定人员获得的。
颁发日期：这是毕业正式生效的时间，也代表着毕业生学业的结束。
其他信息：根据不同的专业和学位，可能会有一些特定的信息或章节。
办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】价值很高，需要妥善保管。一般来说，应放置在安全、干燥、防潮的地方，避免长时间暴露在阳光下。如需使用，最好使用复印件而不是原件，以免丢失。
综上所述，办理(osu毕业证书)美国俄勒冈州立大学毕业证【微信：741003700 】是证明身份和学历的高价值文件。外观简单庄重，格式统一，包括重要的个人信息和发布日期。对持有人来说，妥善保管是非常重要的。
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Energy efficiency has been important since the latter part of the last century. The main object of this survey is to determine the energy efficiency knowledge among consumers. Two separate districts in Bangladesh are selected to conduct the survey on households and showrooms about the energy and seller also. The survey uses the data to find some regression equations from which it is easy to predict energy efficiency knowledge. The data is analyzed and calculated based on five important criteria. The initial target was to find some factors that help predict a person's energy efficiency knowledge. From the survey, it is found that the energy efficiency awareness among the people of our country is very low. Relationships between household energy use behaviors are estimated using a unique dataset of about 40 households and 20 showrooms in Bangladesh's Chapainawabganj and Bagerhat districts. Knowledge of energy consumption and energy efficiency technology options is found to be associated with household use of energy conservation practices. Household characteristics also influence household energy use behavior. Younger household cohorts are more likely to adopt energy-efficient technologies and energy conservation practices and place primary importance on energy saving for environmental reasons. Education also influences attitudes toward energy conservation in Bangladesh. Low-education households indicate they primarily save electricity for the environment while high-education households indicate they are motivated by environmental concerns.
Recently uploaded (20)
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
5G Radio Network Througput Problem Analysis HCIA.pdf
5G Radio Network Througput Problem Analysis HCIA.pdf
smart pill dispenser is designed to improve medication adherence and safety f...
smart pill dispenser is designed to improve medication adherence and safety f...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Use PyCharm for remote debugging of WSL on a Windo cf5c162d672e4e58b4dde5d797...
Software Engineering and Project Management - Introduction, Modeling Concepts...
Software Engineering and Project Management - Introduction, Modeling Concepts...
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
SENTIMENT ANALYSIS ON PPT AND Project template_.pptx
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
Optimizing Gradle Builds - Gradle DPE Tour Berlin 2024
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
NATURAL DEEP EUTECTIC SOLVENTS AS ANTI-FREEZING AGENT
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
Prediction of Electrical Energy Efficiency Using Information on Consumer's Ac...
MILITARY RADAR.pptx
- 2. CONTENTS • INTRODUCTION • PRINCIPLE AND WORKING OF BASIC RADAR • TYPES OF RADAR • APPLICATIONS • ADVANTAGES • DISADVANTAGES • CONCLUSION • REFERENCE
- 3. INTRODUCTION • RADAR is acronym for Radio Detection and Ranging. • First successfully demonstrated in 1936 • Military radar should be an early warning, altering along with weapon control functions. It is specially designed to be highly mobile and should be such that it can be deployed within minutes.
- 4. PRINCIPLE OF WORKING OF BASIC RADAR
- 6. PRIMARY RADAR • CONTINUOUS WAVE RADAR Continuous wave radars continuously transmit a high-frequency signal and thereflected energy is also received and processed continuously
- 9. APPLICATIONS OF RADAR IN DEFENCE FIELD
- 11. ADVANTAGES OF MILITARY RADAR • All-weather day and night capability. • Multiple target handling and engagement capability. • Short and fast reaction time between target detection and ready to fire moment. • Easy to operate and hence low manning requirements and stress reduction under severe condition • Highly mobile system, to be used in all kind of terrain
- 12. DISADVANTAGES • Time - Radar can take up to 2 seconds to lock on • Radar has wide beam spread (50 ft diameter over 200 ft range). • Large targets close to radar can saturate receiver. • Hand-held modulation can falsify readings.
- 13. CONCLUSION • Military radars are one of the most important requirements during the wartime, which can be used for early detection of ballistic missile and also for accurate target detection and firing. Radar system discussed here has a built in threat evaluation program which automatically puts the target in a threat sequence, and advises the weapon crew which target can be engaged first.
- 14. REFERENCE • [1] N.Padmaja1 Dr.S.Varadarajan2 R.Swathi3 ,’ SIGNAL PROCESSING OF RADAR ECHOES USING WAVELETS AND HILBERT HUANG TRANSFORM ‘, Vol 2, SEPT 2011. • [2] R. Gabriel and F. Patrick. “ The Empirical Mode Decomposition Answers”. IEEE Transactions on Signal Processing, vol. 56, No. 1, 2008