This document provides information about the Machining Processes and Metrology course taught by Dr. B. Venkateshwarlu at VIT University. The course covers topics related to mechanics of metal cutting including chip formation, cutting forces, tool materials, and tool wear. Evaluation will include assignments, tests, seminars, and projects. The first module focuses on metal cutting processes and mechanics including types of chips, chip formation mechanisms, orthogonal and oblique cutting, and machining forces.
Manufacturing Engineering 2, cutting tools and tool holdersGaurav Mistry
Detail study of cutting tool materials, some special materials, carbide tip tools, carbide inserts, types, carbide insert holders, ISO designation of carbide inserts, single point cutting tool nomenclature and angles, tool geometry, Tool life, tool wear and types, machinability
You will get some key words to explain. Lathe machine & it's operations...
Normally, the lathes are classified by their functions. They include woodworking lathes, metalworking lathes, glass-working lathes, CNC lathes… Some main types: Woodworking lathes: contain a headstock, bed, tailstock, and tool rest.
Also you will get to know some Operations on lathe Machine
Facing
Turning
Knurling
Chamfering
Drilling etc
Gear Cutting Presentation for Polytechnic College Students of Indiakichu
This presentation was made by me to supplement classroom lecture on Gear Cutting technology as part of the Machine Shop technology module for IV Semester of DME and DAE students of K Scheme. Useful for Polytechnic College Students of India.
Manufacturing Engineering 2, cutting tools and tool holdersGaurav Mistry
Detail study of cutting tool materials, some special materials, carbide tip tools, carbide inserts, types, carbide insert holders, ISO designation of carbide inserts, single point cutting tool nomenclature and angles, tool geometry, Tool life, tool wear and types, machinability
You will get some key words to explain. Lathe machine & it's operations...
Normally, the lathes are classified by their functions. They include woodworking lathes, metalworking lathes, glass-working lathes, CNC lathes… Some main types: Woodworking lathes: contain a headstock, bed, tailstock, and tool rest.
Also you will get to know some Operations on lathe Machine
Facing
Turning
Knurling
Chamfering
Drilling etc
Gear Cutting Presentation for Polytechnic College Students of Indiakichu
This presentation was made by me to supplement classroom lecture on Gear Cutting technology as part of the Machine Shop technology module for IV Semester of DME and DAE students of K Scheme. Useful for Polytechnic College Students of India.
A mechanical engineering undergraduate and graduate always tend to skip learning about Machine Shop. However this subject is as much crucial as Thermodynamics,Strength of Material,Fluid Mechanics and other important subjects.
Click below to ENROLL in the course (Copy paste below URL)
https://www.udemy.com/course/workshop-technology
To introduce machining process
To understand mechanics of chip formation
To study important parameters of metal machining
To understand methods of machining
This presentation contains various aspects of metal cutting like mechanics of chip formation, single point cutting tool, chip breakers, types of chips,etc
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
COLLEGE BUS MANAGEMENT SYSTEM PROJECT REPORT.pdfKamal Acharya
The College Bus Management system is completely developed by Visual Basic .NET Version. The application is connect with most secured database language MS SQL Server. The application is develop by using best combination of front-end and back-end languages. The application is totally design like flat user interface. This flat user interface is more attractive user interface in 2017. The application is gives more important to the system functionality. The application is to manage the student’s details, driver’s details, bus details, bus route details, bus fees details and more. The application has only one unit for admin. The admin can manage the entire application. The admin can login into the application by using username and password of the admin. The application is develop for big and small colleges. It is more user friendly for non-computer person. Even they can easily learn how to manage the application within hours. The application is more secure by the admin. The system will give an effective output for the VB.Net and SQL Server given as input to the system. The compiled java program given as input to the system, after scanning the program will generate different reports. The application generates the report for users. The admin can view and download the report of the data. The application deliver the excel format reports. Because, excel formatted reports is very easy to understand the income and expense of the college bus. This application is mainly develop for windows operating system users. In 2017, 73% of people enterprises are using windows operating system. So the application will easily install for all the windows operating system users. The application-developed size is very low. The application consumes very low space in disk. Therefore, the user can allocate very minimum local disk space for this application.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Hybrid optimization of pumped hydro system and solar- Engr. Abdul-Azeez.pdffxintegritypublishin
Advancements in technology unveil a myriad of electrical and electronic breakthroughs geared towards efficiently harnessing limited resources to meet human energy demands. The optimization of hybrid solar PV panels and pumped hydro energy supply systems plays a pivotal role in utilizing natural resources effectively. This initiative not only benefits humanity but also fosters environmental sustainability. The study investigated the design optimization of these hybrid systems, focusing on understanding solar radiation patterns, identifying geographical influences on solar radiation, formulating a mathematical model for system optimization, and determining the optimal configuration of PV panels and pumped hydro storage. Through a comparative analysis approach and eight weeks of data collection, the study addressed key research questions related to solar radiation patterns and optimal system design. The findings highlighted regions with heightened solar radiation levels, showcasing substantial potential for power generation and emphasizing the system's efficiency. Optimizing system design significantly boosted power generation, promoted renewable energy utilization, and enhanced energy storage capacity. The study underscored the benefits of optimizing hybrid solar PV panels and pumped hydro energy supply systems for sustainable energy usage. Optimizing the design of solar PV panels and pumped hydro energy supply systems as examined across diverse climatic conditions in a developing country, not only enhances power generation but also improves the integration of renewable energy sources and boosts energy storage capacities, particularly beneficial for less economically prosperous regions. Additionally, the study provides valuable insights for advancing energy research in economically viable areas. Recommendations included conducting site-specific assessments, utilizing advanced modeling tools, implementing regular maintenance protocols, and enhancing communication among system components.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
1. Machining Processes and Metrology (MEE2006)
Faculty: Dr. B.Venkateshwarlu, Associate Professor,
School of Mechanical Engineering
VIT University, Vellore
2. Text Book
1. Serope Kalpakjian; Steven R. Schmid (2013),
Manufacturing Engineering and Technology, 6th
Edition,
Publisher: Prentice Hall, ISBN-10 0-13-608168-1,
ISBN- 13 978-0-13-608168-5..
Reference Books
1. P.N.Rao (2013), Manufacturing Technology, McGraw Hill
Education, New Delhi.
2. R.K. Rajput (2015), A Textbook of Manufacturing
Technology, Laxmi publications, New Delhi.
3. P.C. Sharma (2000), Text book of Production Technology,
S.Chand & Company Ltd, New Delhi.
4. O.P. Khanna & M. Lal (2006), A Text book of Production
Technology, Dhanpat Rai Publications, New
Delhi.
3. Mode of Evaluation :
Digital Assignments /Surprise
Test/ Seminars/CAT/FAT
4. Mechanics of metal cutting - cutting tool
materials, temperature, wear, and tool life
considerations, geometry and chip formation,
surface finish and machinability, optimization.
Module 1
Metal Cutting
8. 1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
9. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
10. Types of Chips
3 Types of Chips:
1.Continuous Chips
2.Discontinuous Chips
3.Continuous Chips with Built-Up-Edge
(BUE)
11. Work piece
Cutting tip of the tool
(Single point cutting tool)
Too
l
Types of Chips in metal cutting
Finished surface / work piece
Continuous
Chips
12. Continuous Chips
Produced during machining of more ductile
materials
Reason: Large plastic deformations possible
and longer continuous chips
Features: Chips remain in contact with the
tool face for longer period, result in more
frictional heat
13. Advantages: Results in
1. Stable cutting
2. Good surface finish
Disadvantage:
Difficult to handle and dispose off
because of chip curl around the work piece
14. Types of Chips in metal cutting
1. Continuous Chips
2. Discontinuous Chips
3. Continuous Chips with Built Up Edges
15. Types of Chips in metal cutting
1. Continuous Chips
2. Discontinuous Chips
3. Continuous Chips with Built Up Edges
17. Discontinuous Chips
Produced during machining of more brittle
materials like grey cast iron, bronze and
brass
Reason: lack the ductility necessary for
appreciable plastic deformation of chips
Small fragments of discontinuous chips
18. • Advantages: Results in
1.Better surface finish because of less
friction between tool and chips
2.No chip curl like in continuous chips
3.Chips are convenient to collect, handle
and dispose off
Disadvantage:
Low cutting speeds are desirable
19. Types of Chips in metal cutting
1. Continuous Chips
2. Discontinuous Chips
3. Continuous Chips with Built Up Edges
20. Types of Chips in metal cutting
1. Continuous Chips
2. Discontinuous Chips
3. Continuous Chips with Built Up Edges
33. Types of Chips in metal cutting
1. Continuous Chips
2. Discontinuous Chips
3. Continuous Chips with Built Up Edges
34. Continuous Chips with BUE
Produced during machining of more ductile
materials
Conditions:
• High local temperature and extreme pressure
• High friction in tool- chip interface
These conditions cause work material to
adhere or weld to cutting edge of tool forming
the BUE
35. • Disadvantage: Results in
• Vibrations
• Poor surface finish
Use coolant to reduce or eliminate the BUE
37. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
38. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
48. Work piece
to
tcto = Uncut Chip thickness
tc = Cut chip thickness
If to = tc Ideal case
Chip
49. Work piece
to
tcto = Uncut Chip thickness
tc = Cut chip thickness
If to = tc Ideal case
But always to < tc Real case
Chip
Why?
50. Mechanism of Chip formation
to = tc
to < tc
• Ideal Chip formation
• Realistic chip formation
• Chip formation mechanism
Chip thickness ratio, r = to/tc
Value of chip thickness ratio is always less than 1
61. The recommended rake angle depends on tool material, material to be cut,
speed and depth of cutting.
62. Force on a cutting tool with positive Rake angle
63. Positive rake angles:
•Make the tool more sharp and pointed and reduces strength of the tool, as
the small included angle in the tip may cause it to chip away.
•Used in the cutting of soft materials
•Reduce cutting forces and power requirements.
•HSS tools are typically given a positive rake angle
•Helps in the formation of continuous chips in ductile materials.
•Can help avoid the formation of a built-up edge.
•They used in machining of low-strength ferrous and non-ferrous metal.
•Positive rake angle is not preferred to high-speed operation.
64. Force on a cutting tool with negative Rake angle
65. Negative rake angles:
•Make the tool more blunt, increasing the strength of the cutting edge.
•Used to cut high strength materials
•Cemented carbide tools are normally given negative rake angle.
•Increase the cutting forces.
•It can be used in the high-speed cutting operation.
•Higher cutting force during machining, this also increases the power
consumption.
•Increase vibration, friction and temperature at cutting edge.
66. Neutral Rake angle
• Simplest and easiest to manufacture
• It causes a massive crater wear when compared to other types
• Neutral rake angle obstructs the movement of chip flow and
causes build-up edge chip formation.
67. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
68. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
79. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
80. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
81. Machining Forces
Fc Cutting Force
Measured forces
Ft Tangential Force
Ff Friction Force
Calculated forces
(With the help of equations)
N Normal Force
Fs Shear Force
Fn Normal Shear Force
85. Fc
Ft
TOOL
R
Ff
N
Fs
Fn
Shear plane
Φ
ζ
Uncut Chip thickness
CutChipthickness Fc Cutting Force
Ft Tangential Force
Ff Friction Force
N Normal Force
Fs Shear Force
Fn Normal Shear Force
Tool Rake angle
86. To = Uncut Chip thickness
Tc = Cut Chip thickness
= Tool Rake angle
Fc = Cutting Force
Ft = Tangential Force
Ff = Ft Cos + Fc Sin
N = Fc Cos - Ft Sin
Fs = Fc Cos Φ - Ft Sin Φ
Fn = Fc Sin Φ + Ft Cos Φ
Rc Cos
tan Φ =
1 – Rc Sin
To
Rc = Cutting Ratio =
Tc
Coefficient of Friction
µ = Ff
N
Friction angle
ζ = tan (µ)
-1
87. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
88. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
90. What is MCD?
Fc Cutting Force
Ft Tangential Force
Ff Friction Force
N Normal Force
Fs Shear Force
Fn Normal Shear Force
Measured Forces
Calculated Forces
Withthehelp
ofequations
G
raphicalM
ethod
Ff = Ft Cos + Fc Sin
N = Fc Cos - Ft Sin
Fs = Fc Cos Φ - Ft Sin Φ
Fn = Fc Sin Φ + Ft Cos Φ
120. Procedure for construction of
Merchant circle diagram
• Merchant's Force Circle With Drafting (Optional)
• Merchant's Force Circle is a method for calculating the various forces involved in the cutting process. This
will first be explained with vector diagrams, these in turn will be followed by a few formulas.
• The procedure to construct a merchants force circle diagram (using drafting techniques/instruments) is,
• 1. Set up x-y axis labeled with forces, and the origin in the centre of the page. The scale should be enough
to include both the measured forces. The cutting force (Fc) is drawn horizontally, and the tangential force (Ft)
is drawn vertically. (These forces will all be in the lower left hand quadrant) (Note: square graph paper and
equal x & y scales are essential)
• 2. Draw in the resultant (R) of Fc and Ft.
• 3. Locate the centre of R, and draw a circle that encloses vector R. If done correctly, the heads and tails of
all 3 vectors will lie on this circle.
• 4. Draw in the cutting tool in the upper right hand quadrant, taking care to draw the correct rake angle (a)
from the vertical axis.
• 5. Extend the line that is the cutting face of the tool (at the same rake angle) through the circle. This now
gives the friction vector (F).
• 6. A line can now be drawn from the head of the friction vector, to the head of the resultant vector (R). This
gives the normal vector (N). Also add a friction angle (t) between vectors R and N. As a side note recall that
any vector can be broken down into components. Therefore, mathematically, R = Fc + Ft = F + N.
• 7. We next use the chip thickness, compared to the cut depth to find the shear force. To do this, the chip is
drawn on before and after cut. Before drawing, select some magnification factor (e.g., 200 times) to multiply
both values by. Draw a feed thickness line (t1) parallel to the horizontal axis. Next draw a chip thickness line
parallel to the tool cutting face.
• 8. Draw a vector from the origin (tool point) towards the intersection of the two chip lines, stopping at the
circle. The result will be a shear force vector (Fs). Also measure the shear force angle between Fs and Fc.
• 9. Finally add the shear force normal (Fn) from the head of Fs to the head of R.
• 10. Use a scale and protractor to measure off all distances (forces) and angles.
121. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
122. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
124. 1. High Carbon Steel
This material is one of the earliest cutting materials used in machining. It is however now virtually superseded by other materials used in
engineering because it starts to temper at about 220oC . This softening process continues as the temperature rises. As a result cutting
using this material for tools is limited to speeds up to 0.15 m/s for machining mild steel with lots of coolant.
2. High Speed Steel (HSS)
This range of metals contain about 7% carbon, 4% chromium plus additions of tungsten, vanadium, molybdenum and cobalt. These
metals maintain their hardness at temperature up to about 600o, but soften rapidly at higher temperatures. These materials are suitable
for cutting mild steel at speeds up maximum rates of 0.8 m/s to 1.8 m/s.
3. Cast Alloys
These cutting tools are made of various nonferous metals in a cobalt base. They can withstand cutting temperatures of up to 760oC and
are capable of cutting speeds about 60% higher than HSS.
4. Cemented carbides (cermet) (sintered carbide)
This material usually consists of tungsten carbide or a mixture of tungsten carbide, titanium, or tantalum carbide in powder form, sintered
in a matrix of cobalt or nickel. As this material is expensive and has low rupture strength it is normally made in the form of tips which are
brazed or clamped on a steel shank. The clamped tips are generally used as throw away inserts.
5. Coated Carbides
The cutting system is based on providing a thin layer of high wear-resistant titanium carbide fused to a conventional tough grade carbide
insert, thus achieving a tool combining the wear resistance of one material with the wear resistance of another. These systems provide a
longer wear resistance and a higher cutting speed compared to conventional carbides.
6. Ceramics
Ceramics are made by powder metallurgy from aluminium oxide with additions of titanium oxide and magnesium oxide to improve cutting
properties. These have a very high hot resistance and wear resistance and can cut at very high speed. However they are brittle and have
little resistance to to shock. Their use is therefore limited to tips used for continuous high speed cutting on vibration-free machines.
7. Diamonds
Diamonds have limited application due to the high cost and the small size of the of the stones. They are used on very hard materials to
produce a fine finish and on soft materials. especially those inclined to clog other cutting materials. They are generally used at very high
cutting speed with low feed and light cuts. Due to the brittleness of the diamonds the machine has to be designed to be vibration
free. The tools last for 10 (up to 400) times longer than carbide based tools.
125. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
126. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
128. Machinability
“It is the easiness with which a given
work piece can be machined.”
“It indicates how the work piece responds to
the cutting process”
129. Machinability
“Good machinability means the work piece is
cut with
• Good surface finish
• Long tool life
• Low power requirements
• Low cutting forces
• Low cost
130. Machinability
Machinability depends upon
1. The properties of the w/p and the tool
2. Machining parameters such as speed, feed & depth of cut
3. Condition of the machine tool
4. Expertise of the operator etc………
5. …..
6. ………..
131. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
132. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
133. • Tool wear (Failure of cutting tools)
Tool wear & tool life calculations
Categories of Tool wear
Regions of Tool wear
Reasons of Tool wear
• Tool life calculations
Taylors Tool life equation
134. Failure of cutting tools
• Categories of tool failure…….
» Sudden mechanical failure due to excess shocks
» Plastic deformation due to excess stresses
» Gradual wear
135. Failure of cutting tools
• Regions of Tool wear
– CRATER Wear
– FLANK Wear
Work piece
Tool
Chips
137. Failure of cutting tools
• Reasons of tool wear
» Abrasive wear
It is due to the presence of hard particles scattered
inside the work piece
138. Failure of cutting tools
• Reasons of tool wear
» Adhesive wear
It is due to the sticking up of work piece material upon
the tool surface or vice-versa
139. Failure of cutting tools
• Reasons of tool wear
» Diffusion wear
It is due to the diffusion between the atoms of tool and
work piece material
140. Failure of cutting tools
• Reasons of tool wear
» Corrosion wear
It is due to chemical attacks at the tool-w/p interface
141. Failure of cutting tools
• Reasons of tool wear
» Fracture wear
It is due to sudden fracture of the tool
142. • Tool wear
Tool wear & tool life calculations
Categories of Tool wear
Regions of Tool wear
Reasons of Tool wear
• Tool life calculations
Taylors Tool life equation
143. Tool Life
– It is defined as the useful life of a tool in
between two successive re-conditionings.
144. Tool Life
• Taylor’s tool life equation
He experimentally found that
At HIGH cutting speed
Production rate
increases
LESS tool life
At LOW cutting speed
Production rate
decreases
MORE tool life
145. Tool Life
• Taylor’s tool life equation
At slow cutting speeds High tool life
At high cutting speeds Less tool life
Therefore his findings were
146. Tool Life
Therefore there exists a relationship
between the cutting speed & tool life
ie; there exists an optimum value for the
cutting speed & tool life
147. Tool Life
Where
V = Cutting Speed in rpm
T = Tool life expressed in minutes
n = Index Value
C = a constant
ie;
V1 T1 = V2 T2 = V3 T3 ……. = C
n n n
Taylor’s Tool life equation V T = C
n
148. The following values may be taken for “n”
n=0.1 to 0.15 for HSS tools
n=0.2 to 0.4 for Carbide tools
n=0.4 to 0.6 for Ceramic tools
149. Taylor’s tool life equation
Problem 1
If in turning of a steel rod by a given cutting tool at a given machining condition
under a given environment, the tool life decreases from 80 min to 20 min, due to
increase in cutting velocity (Vc) from 60 m/min to 120 m/min, then at what
cutting velocity the life of that tool under the same condition and environment
will be 40 min.?
Answer: 84.8528 m/min
Problem 2:
A tool has a life of 9 min when cutting at 250 m/min. Calculate the cutting speed
for the same tool to have a tool life of 160 min. Take Taylor tool life parameter
n=0.22.
(Ans: 132.73 m/min)
150. Problem 2
A lathe spindle running at 4000 rpm is cutting
Mild Steel work piece with a H.S.S. tool.
If the spindle speed is reduced to 3000 rpm,
calculate the percentage change in tool life.
(For the given work piece – tool combination,
assume n = 0.125)
151. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
152. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
154. CUTTING FLUIDS IN MACHINING
A. Functions of cutting fluid
a) Primary Functions
i. Lubricating the entire cutting process
ii. Cooling the work piece & tool
iii. Washing away the chips
b) Secondary Functions
i. Improved tool life
ii. Improved surface finish
iii. Reduced work piece deformation
B. Various methods to apply cutting fluid
a) Flood application
b) Jet application
c) Mist application (Spray application)
FLOOD application
JET application
MIST (spray)
application
Coolant
pipe
Air jet
158. • Thermal aspects of metal cutting
- causes, effects, assessment & control
Refer page No. 34, 35, 36 & 37
Manufacturing Technology- Metal cutting and Machine tools
By P.N.RAO
159. UNIT - 1
THEORY OF METAL CUTTING
1. Types of chips in metal cutting
2. Mechanism of chip formation
3. Orthogonal & Oblique cutting
4. Machining Forces
5. Merchant’s Circle Diagram
6. Thermal Aspects of metal cutting
7. Machinability
8. Cutting Tool materials
9. Tool wear & Tool life calculations
160. UNIT - 1
THEORY OF METAL CUTTING
Mechanism of chip formation - Orthogonal & Oblique
cutting - Machining forces - Merchant’s Circle Diagram
- Thermal aspects of metal machining - Cutting fluids -
Machinability - Cutting tool materials - Tool wear and
Tool life calculations.
Completed