An overview of distillation column design concepts and major design considerations. Explains distillation column design concepts, what you would provide to a professional distillation column designer, and what you can expect back from a distillation system design firm. To speak with an engineer about your distillation column project, call EPIC at 314-207-4250.
Selection of Heat Exchanger Types
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 BACKGROUND
5 FACTORS INFLUENCING SELECTION
5.1 Type of Duty
5.2 Temperatures and Pressures
5.3 Materials of Construction 5.4 Fouling
5.5 Safety and Reliability
5.6 Repairs
5.7 Design Methods
5.8 Dimensions and Weight
5.9 Cost
5.10 GBHE Experience
6 TYPES OF EXCHANGER
6.1 Shell and Tube Exchangers
6.2 Cylindrical Graphite Block Heat Exchangers
6.3 Cubic Graphite Block Heat Exchangers
6.4 Air Cooled Heat Exchangers
6.5 Gasketed Plate and Frame
6.6 Spiral Plate
6.7 Tube in Duct
6.8 Plate-fin
6.9 Printed Circuit Heat Exchanger (PCHE)
6.10 Scraped Surface/Wiped Film Exchangers
6.11 Welded or Brazed Plate
6.12 Double Pipe
6.13 Electric Heaters
6.14 Fired Process Heaters
TABLE
(1) ADVANTAGES AND DISADVANTAGES OF DIFFERENT SHELL AND TUBE DESIGNS
FIGURES
1 ESTIMATED MAIN PLANT ITEM COSTS
2 ESTIMATED INSTALLED COSTS
3 TEMA HEAT EXCHANGER NOMENCLATURE
4 F ‘CORRECTION FACTORS' : TEMA E SHELL WITH EVEN NUMBER OF PASSE
5 SHELL AND TUBE HEAT EXCHANGER HEAD TYPES
6 GENERAL ARRANGEMENT OF A CYLINDRICAL GRAPHITE BLOCK HEAT EXCHANGER
7 EXPLODED VIEW OF A CUBIC GRAPHITE BLOCK
HEAT EXCHANGER
8 TYPICAL AIR COOLED HEAT EXCHANGER
9 GENERAL VIEW OF ONE END OF A 3-STREAM
PLATE-FIN HEAT EXCHANGER
10 TYPICAL PCHE PLATE
11 VICARB ‘COMPABLOC' EXCHANGER
12 ‘BROWN FINTUBE' MULTITUBE HEAT EXCHANGER
13 FIRED HEATER : SCHEMATICS AND NOMENCLATURE
An overview of distillation column design concepts and major design considerations. Explains distillation column design concepts, what you would provide to a professional distillation column designer, and what you can expect back from a distillation system design firm. To speak with an engineer about your distillation column project, call EPIC at 314-207-4250.
Selection of Heat Exchanger Types
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 BACKGROUND
5 FACTORS INFLUENCING SELECTION
5.1 Type of Duty
5.2 Temperatures and Pressures
5.3 Materials of Construction 5.4 Fouling
5.5 Safety and Reliability
5.6 Repairs
5.7 Design Methods
5.8 Dimensions and Weight
5.9 Cost
5.10 GBHE Experience
6 TYPES OF EXCHANGER
6.1 Shell and Tube Exchangers
6.2 Cylindrical Graphite Block Heat Exchangers
6.3 Cubic Graphite Block Heat Exchangers
6.4 Air Cooled Heat Exchangers
6.5 Gasketed Plate and Frame
6.6 Spiral Plate
6.7 Tube in Duct
6.8 Plate-fin
6.9 Printed Circuit Heat Exchanger (PCHE)
6.10 Scraped Surface/Wiped Film Exchangers
6.11 Welded or Brazed Plate
6.12 Double Pipe
6.13 Electric Heaters
6.14 Fired Process Heaters
TABLE
(1) ADVANTAGES AND DISADVANTAGES OF DIFFERENT SHELL AND TUBE DESIGNS
FIGURES
1 ESTIMATED MAIN PLANT ITEM COSTS
2 ESTIMATED INSTALLED COSTS
3 TEMA HEAT EXCHANGER NOMENCLATURE
4 F ‘CORRECTION FACTORS' : TEMA E SHELL WITH EVEN NUMBER OF PASSE
5 SHELL AND TUBE HEAT EXCHANGER HEAD TYPES
6 GENERAL ARRANGEMENT OF A CYLINDRICAL GRAPHITE BLOCK HEAT EXCHANGER
7 EXPLODED VIEW OF A CUBIC GRAPHITE BLOCK
HEAT EXCHANGER
8 TYPICAL AIR COOLED HEAT EXCHANGER
9 GENERAL VIEW OF ONE END OF A 3-STREAM
PLATE-FIN HEAT EXCHANGER
10 TYPICAL PCHE PLATE
11 VICARB ‘COMPABLOC' EXCHANGER
12 ‘BROWN FINTUBE' MULTITUBE HEAT EXCHANGER
13 FIRED HEATER : SCHEMATICS AND NOMENCLATURE
Air Cooled Heat Exchanger Design
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 SUITABILITY FOR AIR COOLING
4.1 Options Available For Cooling
4.2 Choice of Cooling System
5 SPECIFICATION OF AN AIR COOLED HEAT
EXCHANGER
5.1 Description and Terminology
5.2 General
5.3 Thermal Duty and Design Margins
5.4 Process Pressure Drop
5.5 Design Ambient Conditions
5.6 Process Physical Properties
5.7 Mechanical Design Constraints
5.8 Arrangement
5.9 Air Side Fouling
5.10 Economic Factors in Design
6 CONTROL
7 PRESSURE RELIEF
8 ASSESSMENT OF OFFERS
8.1 General
8.2 Manual Checking Of Designs
8.3 Computer Assessment
8.4 Bid Comparison
9 FOULING AND CORROSION
9.1 Fouling
9.2 Corrosion
10 OPERATION AND MAINTENANCE
10.1 Performance Testing
10.2 Air-Side Cleaning
10.3 Mechanical Maintenance
10.4 Tube side Access
11 REFERENCES
Flash Steam and Steam Condensates in Return LinesVijay Sarathy
In power plants, boiler feed water is subjected to heat thereby producing steam which acts as a motive force for a steam turbine. The steam upon doing work loses energy to form condensate and is recycled/returned back to reduce the required make up boiler feed water (BFW).
Recycling steam condensate poses its own challenges. Flash Steam is defined as steam generated from steam condensate due to a drop in pressure. When high pressure and temperature condensate passes through process elements such as steam traps or pressure reducing valves to lose pressure, the condensate flashes to form steam. Greater the drop in pressure, greater is the flash steam generated. This results in a two phase flow in the condensate return lines.
CENTRIFUGAL COMPRESSOR SETTLE OUT CONDITIONS TUTORIALVijay Sarathy
Centrifugal Compressors are a preferred choice in gas transportation industry, mainly due to their ability to cater to varying loads. In the event of a compressor shutdown as a planned event, i.e., normal shutdown (NSD), the anti-surge valve is opened to recycle gas from the discharge back to the suction (thereby moving the operating point away from the surge line) and the compressor is tripped via the driver (electric motor or Gas turbine / Steam Turbine). In the case of an unplanned event, i.e., emergency shutdown such as power failure, the compressor trips first followed by the anti-surge valve opening. In doing so, the gas content in the suction side & discharge side mix.
Therefore, settle out conditions is explained as the equilibrium pressure and temperature reached in the compressor piping and equipment volume following a compressor shutdown
applications of the principles of heat transfer to design of heat exchangersKathiresan Nadar
This file contain a very good description for the processes design of heat ex changer. the file courtesy is Prof. Anand Patwardhan ICT Mumbai (Deemed University)
this ppt is made with the reference of heat exchangers that have been used in NHFI, it almost covers their every aspect that is their working, maintenance, and safety !!
so please suit yourself!!!
Selection and Design of Condensers
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 CHOICE OF COOLANT
5 LAYOUT CONSIDERATIONS
5.1 Distillation Column Condensers
5.2 Other Process Condensers
6 CONTROL
6.1 Distillation Columns
6.2 Water Cooled Condensers
6.3 Refrigerant Condensers
7 GENERAL DESIGN CONSIDERATIONS
7.1 Heat Transfer Resistances
7.2 Pressure Drop
7.3 Handling of Inerts
7.4 Vapor Inlet Design
7.5 Drainage of Condensate
8 SUMMARY OF TYPES AVAILABLE
8.1 Direct Contact Condensers
8.2 Shell and Tube Exchangers
8.3 Air Cooled Heat Exchangers
8.4 Spiral Plate Heat Exchangers
8.5 Internal Condensers
8.6 Plate Heat Exchangers
8.7 Plate-Fin Heat Exchangers
8.8 Other Compact Designs
9 BIBLIOGRAPHY
FIGURES
1 DIRECT CONTACT CONDENSER WITH INDIRECT COOLER FOR RECYCLED CONDENSATE
2 SPRAY CONDENSER
3 TRAY TYPE CONDENSER
4 THREE PASS TUBE SIDE CONDENSER WITH INTERPASS LUTING FOR CONDENSATE DRAINAGE
5 CROSS FLOW CONDENSER WITH SINGLE PASS COOLANT
Heat Exchanger (Shell and tubes) by sujan kharel..ansaluniversity3
Hey! This is the best presentation about Heat exchanger device of shell and tubes type and there is also mentioned their defects and overcome method...
Shell and Tube Heat Exchanger in heat TransferUsman Shah
This slide will explain you the chemical engineering terms .Al about the basics of this slide are explain in it. The basics of fluid mechanics, heat transfer, chemical engineering thermodynamics, fluid motions, newtonian fluids, are explain in this process.
Air Cooled Heat Exchanger Design
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 SUITABILITY FOR AIR COOLING
4.1 Options Available For Cooling
4.2 Choice of Cooling System
5 SPECIFICATION OF AN AIR COOLED HEAT
EXCHANGER
5.1 Description and Terminology
5.2 General
5.3 Thermal Duty and Design Margins
5.4 Process Pressure Drop
5.5 Design Ambient Conditions
5.6 Process Physical Properties
5.7 Mechanical Design Constraints
5.8 Arrangement
5.9 Air Side Fouling
5.10 Economic Factors in Design
6 CONTROL
7 PRESSURE RELIEF
8 ASSESSMENT OF OFFERS
8.1 General
8.2 Manual Checking Of Designs
8.3 Computer Assessment
8.4 Bid Comparison
9 FOULING AND CORROSION
9.1 Fouling
9.2 Corrosion
10 OPERATION AND MAINTENANCE
10.1 Performance Testing
10.2 Air-Side Cleaning
10.3 Mechanical Maintenance
10.4 Tube side Access
11 REFERENCES
Flash Steam and Steam Condensates in Return LinesVijay Sarathy
In power plants, boiler feed water is subjected to heat thereby producing steam which acts as a motive force for a steam turbine. The steam upon doing work loses energy to form condensate and is recycled/returned back to reduce the required make up boiler feed water (BFW).
Recycling steam condensate poses its own challenges. Flash Steam is defined as steam generated from steam condensate due to a drop in pressure. When high pressure and temperature condensate passes through process elements such as steam traps or pressure reducing valves to lose pressure, the condensate flashes to form steam. Greater the drop in pressure, greater is the flash steam generated. This results in a two phase flow in the condensate return lines.
CENTRIFUGAL COMPRESSOR SETTLE OUT CONDITIONS TUTORIALVijay Sarathy
Centrifugal Compressors are a preferred choice in gas transportation industry, mainly due to their ability to cater to varying loads. In the event of a compressor shutdown as a planned event, i.e., normal shutdown (NSD), the anti-surge valve is opened to recycle gas from the discharge back to the suction (thereby moving the operating point away from the surge line) and the compressor is tripped via the driver (electric motor or Gas turbine / Steam Turbine). In the case of an unplanned event, i.e., emergency shutdown such as power failure, the compressor trips first followed by the anti-surge valve opening. In doing so, the gas content in the suction side & discharge side mix.
Therefore, settle out conditions is explained as the equilibrium pressure and temperature reached in the compressor piping and equipment volume following a compressor shutdown
applications of the principles of heat transfer to design of heat exchangersKathiresan Nadar
This file contain a very good description for the processes design of heat ex changer. the file courtesy is Prof. Anand Patwardhan ICT Mumbai (Deemed University)
this ppt is made with the reference of heat exchangers that have been used in NHFI, it almost covers their every aspect that is their working, maintenance, and safety !!
so please suit yourself!!!
Selection and Design of Condensers
0 INTRODUCTION/PURPOSE
1 SCOPE
2 FIELD OF APPLICATION
3 DEFINITIONS
4 CHOICE OF COOLANT
5 LAYOUT CONSIDERATIONS
5.1 Distillation Column Condensers
5.2 Other Process Condensers
6 CONTROL
6.1 Distillation Columns
6.2 Water Cooled Condensers
6.3 Refrigerant Condensers
7 GENERAL DESIGN CONSIDERATIONS
7.1 Heat Transfer Resistances
7.2 Pressure Drop
7.3 Handling of Inerts
7.4 Vapor Inlet Design
7.5 Drainage of Condensate
8 SUMMARY OF TYPES AVAILABLE
8.1 Direct Contact Condensers
8.2 Shell and Tube Exchangers
8.3 Air Cooled Heat Exchangers
8.4 Spiral Plate Heat Exchangers
8.5 Internal Condensers
8.6 Plate Heat Exchangers
8.7 Plate-Fin Heat Exchangers
8.8 Other Compact Designs
9 BIBLIOGRAPHY
FIGURES
1 DIRECT CONTACT CONDENSER WITH INDIRECT COOLER FOR RECYCLED CONDENSATE
2 SPRAY CONDENSER
3 TRAY TYPE CONDENSER
4 THREE PASS TUBE SIDE CONDENSER WITH INTERPASS LUTING FOR CONDENSATE DRAINAGE
5 CROSS FLOW CONDENSER WITH SINGLE PASS COOLANT
Heat Exchanger (Shell and tubes) by sujan kharel..ansaluniversity3
Hey! This is the best presentation about Heat exchanger device of shell and tubes type and there is also mentioned their defects and overcome method...
Shell and Tube Heat Exchanger in heat TransferUsman Shah
This slide will explain you the chemical engineering terms .Al about the basics of this slide are explain in it. The basics of fluid mechanics, heat transfer, chemical engineering thermodynamics, fluid motions, newtonian fluids, are explain in this process.
Experimental and Analytical Performance of Gas Gap Cryogenic Thermal Switch ...ijsrd.com
Heat switches are important devices in many cryogenic setups, especially in space applications and many systems have been used to allow a good ability to make or break a thermal contact. Among them, the so-called gas gap heat switches are known to be very reliable and simple due to the nonexistence of moving parts. The ON (conducting) state of the switch are obtained by varying the gas pressure and OFF (insulating) are obtained by creating vacuum in gap. In this paper, the gas gap cryogenic thermal switch is fabricated and tested using LN2 storage vessel. The thermal characteristics (Conductance in the ON and OFF state) of a "Gas Gap Heat Switch" are obtained experimentally and analytically using nitrogen as exchange gas. It is concluded that for both ON and OFF state, thermal conductance increases as heat load increases.
human recourse information system; public sector; performance; satisfaction o...IJERA Editor
Electric Water Heaters are widely used all over the world that can be categorized in two types i.e. Instant Water Heaters & Storage type Water Heaters. The energy consumption for 6 liter water heaters is much higher in the storage type of water heater. As energy is an important factor for economic development of country, therefore there is need to save the energy which implies the focus to use Storage type Water Heaters. In 6 Liter water heater, Existing model converting from 4 star rating to 5 star rating by thermal analysis & insulation. After the theoretical calculation of thickness of glass wool is the practical testing of product with BEE norms & got results for 5 Star Calculation. Finally we are doing the thermal analysis for theoretical & practical verification of the product
The primary objective of this report is to provide a convenient, consistent and accurate method of calculating heating and cooling loads and to enable the designer to select systems that meet the requirement for efficient utilization and are also responsive to environmental needs. The ability to estimate loads more accurately due to changes in the calculation procedure provides a lessened margin of error. Therefore, it becomes increasingly important to survey and check more carefully the load sources, each item in the load and the effect of the system type on the load. Junaid Hussain | Syed Abdul Gaffar "Heat Load Calculation" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26571.pdfPaper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/26571/heat-load-calculation/junaid-hussain
Enhancement of heat transfer from plate fin heat sinkseSAT Journals
Abstract Heat Sinks are an extremely useful component used to lower the maximum temperature of various electronic devices during operation so as to increase their thermal efficiency and performance. Fins constitute an important and integral component of sinks. It is a passive cooling technique. Plate fin heat sinks are used in varied applications owing to its low manufacturing cost, ease of manufacture and its economical way to dissipate unwanted heat. Steady state natural convection is experimentally investigated for 03 sets of vertically mounted fin heat sinks. Aluminum is used because of its high conductivity. Length and fin thickness is kept constant at 200 mm and 05 mm respectively. Fin height is successively increased as 10mm, 30mm, 50mm.Aspect Ratio for above three sets is thus 0.05, 0.15 and 0.25 respectively. Effect of varying height, heat input and aspect ratio, keeping length constant is investigated on heat transfer through the sinks. Keywords: Heat Sinks, Fins, Natural Convection, Aspect Ratio
Paul J. Boudreaux Consider a Mixed Analog/Digital/MEMsssusercf6d0e
Heat spreaders with high K values attached to the chip can help alleviate lateral DT problems. Placing the system or components into a forced isothermal environment also reduces DT, dT/dt and CTE related problems. Severing the thermomechanical heat path reduces or eliminates shock and vibration from entering the system while reducing weight.
Apart from TDMA, there are other iterative methods for solving the
system of equations which are faster. Unlike TDMA, which solves
the problem line by line, these iterative methods solves all
equations simultaneously. As a result these methods are faster than
TDMA. Some of the fast iterative methods are
1) SIP (strongly implicit procedure)
2) MSIP (modified SIP)
3) CG (Conjugate gradient method)
4) BiCGSTAB (bi-conjugate gradient stabilized method)
CG method is used for solving linear systems of equations which
have a symmetric coefficient matrix. All other methods mentioned
above are used for systems of equations involving non-symmetric
coefficient matrices.
must be set up at each nodal point.
We obtain a system of linear algebraic equations
Solve the system for values
Use any matrix solution method.
e.g. Tri-diagonal matrix algorithm (see textbook)
or: Gauss Seidel iteration method.
The convection of a scalar variable depends on the
magnitude and direction of the local velocity field.
How to find flow field?
Momentum equations can be derived from the Both sides of the equation contains temperatures at the new time step,
and a system of algebraic equations must be solved at each time level
is unconditionally stable for any Δt
is only first order accurate in time
small time steps are needed to ensure accuracy of results
The understanding of two-phase flow and heat transfer
with phase change in minichannels is needed for the design and
optimization of heat exchangers and other industrial
applications. In this study a three-dimensional numerical model
has been developed to predict filmwise condensation heat
transfer inside a rectangular minichannel. The Volume of Fluid
(VOF) method is used to track the vapor-liquid interface. The
modified High Resolution Interface Capture (HRIC) scheme is
employed to keep the interface sharp. The governing equations
and the VOF equation with relevant source terms for
condensation are solved. The surface tension is taken into
account in the modeling and it is evaluated by the Continuum
Surface Force (CSF) approach. The simulation is performed
using the CFD software package, ANSYS FLUENT, and an inhouse
developed code. This in-house code is specifically
developed to calculate the source terms associated with phase
change. These terms are deduced from Hertz-Knudsen equation
based on the kinetic gas theory. The numerical results are
validated with data obtained from the open literature. The
standard k-ω model is applied to model the turbulence through
both the liquid and vapor phase. The numerical results show
that surface tension plays an important role in the condensation
heat transfer process. Heat transfer enhancement is obtained
due to the presence of the corners. The surface tension pulls the
liquid towards the corners and reduces the average thermal
resistance in the cross section.
The role of boilers and heat recovery steam generators (HRSGs) in the industrial
economy has been profound. Boilers form the backbone of power plants,
cogeneration systems, and combined cycle plants. There are few process
plants, refineries, chemical plants, or electric utilities that do not have a steam
plant. Steam is the most convenient working fluid for industrial processing,
heating, chilling, and power generation applications. Fossil fuels will continue to
be the dominant energy providers for years to come.
This book is about steam generators, HRSGs, and related systems. There
are several excellent books on steam generation and boilers, and each has been
successful in emphasizing certain aspects of boilers and related topics such as
mechanical design details, metallurgy, corrosion, constructional aspects, maintenance,
or operational issues. This book is aimed at providing a different
perspective on steam generators and is biased toward thermal and process
design aspects of package boilers and HRSGs. (The terms ‘‘waste heat boiler’’
and ‘‘HRSG’’ are used in the same context.) My emphasis on thermal engineering
aspects of steam generators reinforced by hundreds of worked-out real-life
examples pertaining to boilers, HRSGs, and related systems will be of interest
to engineers involved in a broad field of steam generator–related activities such as
consulting, design, performance evaluation, and operation. During the last three decades I have had the opportunity to design hundreds
of package boilers and several hundred waste heat boilers that are in operation in
the U.S. and abroad. Based on my experience in reviewing numerous specifications
of boilers and HRSGs, I feel that consultants, plant engineers, contractors,
and decision makers involved in planning and developing steam plants often do
not appreciate some of the important and subtle aspects of design and performance
of steam generators.
Among the leading causes of discomfort in an air conditioned environment we can detected:
• too high air flow, generating drafts;
• uneven distribution of the incoming air volume;
• non homogeneous temperature distribution in the room.
To avoid these drawbacks, it is necessary to generate a proper diffusion of the air, which guarantees the right
temperature, relative humidity, speed and purity corresponding to the environmental comfort desired.
The Eurapo UCS cassette units are able to give a balanced response to all these needs: the outlet air is spread
like a classic four-way ceiling diffuser, with distribution from two to four orthogonal directions.
This system takes full advantage of the Coanda effect, greatly reducing the air flow direct to people, with
positive consequences for their comfort.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Automobile Management System Project Report.pdfKamal Acharya
The proposed project is developed to manage the automobile in the automobile dealer company. The main module in this project is login, automobile management, customer management, sales, complaints and reports. The first module is the login. The automobile showroom owner should login to the project for usage. The username and password are verified and if it is correct, next form opens. If the username and password are not correct, it shows the error message.
When a customer search for a automobile, if the automobile is available, they will be taken to a page that shows the details of the automobile including automobile name, automobile ID, quantity, price etc. “Automobile Management System” is useful for maintaining automobiles, customers effectively and hence helps for establishing good relation between customer and automobile organization. It contains various customized modules for effectively maintaining automobiles and stock information accurately and safely.
When the automobile is sold to the customer, stock will be reduced automatically. When a new purchase is made, stock will be increased automatically. While selecting automobiles for sale, the proposed software will automatically check for total number of available stock of that particular item, if the total stock of that particular item is less than 5, software will notify the user to purchase the particular item.
Also when the user tries to sale items which are not in stock, the system will prompt the user that the stock is not enough. Customers of this system can search for a automobile; can purchase a automobile easily by selecting fast. On the other hand the stock of automobiles can be maintained perfectly by the automobile shop manager overcoming the drawbacks of existing system.
Forklift Classes Overview by Intella PartsIntella Parts
Discover the different forklift classes and their specific applications. Learn how to choose the right forklift for your needs to ensure safety, efficiency, and compliance in your operations.
For more technical information, visit our website https://intellaparts.com
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
TECHNICAL TRAINING MANUAL GENERAL FAMILIARIZATION COURSEDuvanRamosGarzon1
AIRCRAFT GENERAL
The Single Aisle is the most advanced family aircraft in service today, with fly-by-wire flight controls.
The A318, A319, A320 and A321 are twin-engine subsonic medium range aircraft.
The family offers a choice of engines