This document presents a proposed system for monitoring water levels in multiple water dispensers using IoT technologies. The system uses ultrasonic sensors connected to an Arduino board to measure water levels in each dispenser. When the water level drops below a threshold, the Arduino sends a notification to an authorized mobile application via cloud messaging. This allows a single person to remotely monitor water levels across many dispensers and be notified when refills are needed. The proposed system aims to provide a more efficient solution than manual monitoring by automating notifications and enabling remote management of large numbers of dispensers from a mobile app.
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
IoT Based Water Quality Monitoring System for Smart CitiesYogeshIJTSRD
Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
Io t based water level monitoring system of dams insangamesh kumbar
IoT-BASED WATER LEVEL MONITORING SYSTEM OF DAMS IN KARNATAKA,This project proposes a wireless solution, based on Global System for Mobile Communication (GSM) network for the monitoring and controlling of the dams water level parameter.
The equipment uses an ultrasonic sensor device to accurately measure and determine the waters in real time.
The standalone Water Level Monitoring System is equipped with solar panel and makes use of an ultrasonic sensor to measure the rate of change of water level using the principle similar to radar and sonar.
The sensor calculates the time interval between sending the signal and receiving the echo to determine the water level.
The information collected is then transmitted to a central server at a predefined interval, via SMS.
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
IoT Based Remote Monitoring and Controlling for Shutter Systemsijtsrd
The technological advancement of the current technology has affected the processes of the most of the economic and social related businesses. The aims of this advancement are to serve and make human life more comfortable and however, there are still lots of areas in our daily life where manual processes are used. Taking as an example in the water control and management systems, where many authorities use manual systems for water controland management. Especially nowadays most of the countriesare still using manual system for controlling and monitoring the dams. Due to the complicated and time consuming process in a manual system, a model for Remote Monitoring and Controlling of Dams is proposed that uses remote control technology, linked to the web technology, to attain great success in monitoring and controlling water levels in managing dams. This paper is to present a new solution which it is to implemental proposed system called as RMCD ""Remote Monitoring and Controlling of Dams"". With the proposed system it will allow the user to control and monitor the dams remotely which it is saving a lot of efforts, reducing the cost and also increasing the monitoring quality as the users are going to use automated system rather than using of manual system. Shaik Roshan | Dr. M. Muthuvinayagam | S. Manivannan ""IoT Based Remote Monitoring and Controlling for Shutter Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,
URL: https://www.ijtsrd.com/papers/ijtsrd30123.pdf
Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30123/iot-based-remote-monitoring-and-controlling-for-shutter-systems/shaik-roshan
The Internet of Things (IoT) has provided promising opportunities to create powerful industrial and domestic applications. One of its main applications is smart metering. The existing analogue meter in residential area requires consistent human monitoring, which leads to computational errors. Huge labor force, their negligence and money invested are the drawback of such meters. Therefore, a cost effective and low power smart-meter that can monitor the daily consumption of water in residential area need to be developed, in order to conserve water. Here in this research, SOC based smart water meter is developed to provide cost effective solution. Further, the developed system is implemented in real time to investigate the reliability and feasibility.
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
Real Time Water Quality Monitoring and Alert Systems, Applications using OPEX...RekaNext Capital
In complex engineering business, it is useful to consider a OPEX model rather than a CAPEX model. This is to protect the customer from complex technology risks, changing technologies. Customer pays for successful delivery of services rather than buying equipment.
IoT Based Water Quality Monitoring System for Smart CitiesYogeshIJTSRD
Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
Io t based water level monitoring system of dams insangamesh kumbar
IoT-BASED WATER LEVEL MONITORING SYSTEM OF DAMS IN KARNATAKA,This project proposes a wireless solution, based on Global System for Mobile Communication (GSM) network for the monitoring and controlling of the dams water level parameter.
The equipment uses an ultrasonic sensor device to accurately measure and determine the waters in real time.
The standalone Water Level Monitoring System is equipped with solar panel and makes use of an ultrasonic sensor to measure the rate of change of water level using the principle similar to radar and sonar.
The sensor calculates the time interval between sending the signal and receiving the echo to determine the water level.
The information collected is then transmitted to a central server at a predefined interval, via SMS.
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
IoT Based Remote Monitoring and Controlling for Shutter Systemsijtsrd
The technological advancement of the current technology has affected the processes of the most of the economic and social related businesses. The aims of this advancement are to serve and make human life more comfortable and however, there are still lots of areas in our daily life where manual processes are used. Taking as an example in the water control and management systems, where many authorities use manual systems for water controland management. Especially nowadays most of the countriesare still using manual system for controlling and monitoring the dams. Due to the complicated and time consuming process in a manual system, a model for Remote Monitoring and Controlling of Dams is proposed that uses remote control technology, linked to the web technology, to attain great success in monitoring and controlling water levels in managing dams. This paper is to present a new solution which it is to implemental proposed system called as RMCD ""Remote Monitoring and Controlling of Dams"". With the proposed system it will allow the user to control and monitor the dams remotely which it is saving a lot of efforts, reducing the cost and also increasing the monitoring quality as the users are going to use automated system rather than using of manual system. Shaik Roshan | Dr. M. Muthuvinayagam | S. Manivannan ""IoT Based Remote Monitoring and Controlling for Shutter Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,
URL: https://www.ijtsrd.com/papers/ijtsrd30123.pdf
Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30123/iot-based-remote-monitoring-and-controlling-for-shutter-systems/shaik-roshan
The Internet of Things (IoT) has provided promising opportunities to create powerful industrial and domestic applications. One of its main applications is smart metering. The existing analogue meter in residential area requires consistent human monitoring, which leads to computational errors. Huge labor force, their negligence and money invested are the drawback of such meters. Therefore, a cost effective and low power smart-meter that can monitor the daily consumption of water in residential area need to be developed, in order to conserve water. Here in this research, SOC based smart water meter is developed to provide cost effective solution. Further, the developed system is implemented in real time to investigate the reliability and feasibility.
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
Real Time Water Quality Monitoring and Alert Systems, Applications using OPEX...RekaNext Capital
In complex engineering business, it is useful to consider a OPEX model rather than a CAPEX model. This is to protect the customer from complex technology risks, changing technologies. Customer pays for successful delivery of services rather than buying equipment.
In today’s global scenario, water wastage and water shortage are an over rising problem. With the world population rising minute by minute, the need for water is increasing and therefore water conservation is the need of the hour. Today’s industries need huge amount of manpower for system supervision. We have come out with a solution where we use sensors to measure the water level of the storage system and be informed about the same, saving human efforts. Here, sensors are fit in the storage tank at different levels. The sensors are further connected to a microcontroller. The sensors detect the water level and inform it to the microcontroller which displays the storage tank status on the Liquid Crystal Display (LCD). A gate mechanism is also attached to this system which is triggered when the water level reaches the brim of the storage system.
IOT based Water Level Monitoring system is an improved system which will inform the users about the level of liquid and will prevent it from overflowing. To demonstrate this the system makes use of containers, where the ultrasonic sensors placed over the containers to detect the liquid level and compare it with the container’s depth. The system makes use of AVR family microcontroller, Arduino, LCD screen, Wi-Fi modem for sending data and a buzzer. A 12 V transformer is used for power supply in this system. The LCD screen is used to display the status of the level of liquid in the containers. The liquid level is highlighted as colored to show the level of liquid present in the container with the help of a web page to the user. The buzzer starts ringing when the set limit of the liquid is crossed. Thus this system helps
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Vaccine management system project report documentation..pdfKamal Acharya
The Division of Vaccine and Immunization is facing increasing difficulty monitoring vaccines and other commodities distribution once they have been distributed from the national stores. With the introduction of new vaccines, more challenges have been anticipated with this additions posing serious threat to the already over strained vaccine supply chain system in Kenya.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.