This document describes a smart water controlling and monitoring system that aims to minimize water wastage. It uses sensors to detect water levels in overhead and underground tanks. When certain levels are reached, the system automatically controls the inlet valve and motor pump to fill the tanks. It can monitor the tank levels and operating status of the valves and motor from a remote location using GSM technology. This allows for automated operation that conserves water and prevents equipment damage from low or overflowing levels while still providing status updates when users are away.
IoT Based Detection of Leakages in Gas Pipesijtsrd
In industries leakage of Gas in the pipeline is a major issue nowadays. Leakage is defined as the accidental admission or escape of fluid through a hole or crack from the pipe. Gas leakages lead to losses as well as fire accidents. This project takes the control over automatic detection of leakages than the man power and thus reduce loss. Here we propose an inventive robot that clings on to the outer surface of the gas pipe and moves along the pipe to check for leakages. The kit consists of MQ5 gas sensor to detect the gas leakages. The robot moves continuously along the metal pipe, if there any presence of leakage the particular position is sensed by ultrasonic sensor and the message is send to the IOT through Wi Fi module. P. Anitha | K. Saranya ""IoT Based Detection of Leakages in Gas Pipes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23722.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23722/iot-based-detection-of-leakages-in-gas-pipes/p-anitha
IoT Based Remote Monitoring and Controlling for Shutter Systemsijtsrd
The technological advancement of the current technology has affected the processes of the most of the economic and social related businesses. The aims of this advancement are to serve and make human life more comfortable and however, there are still lots of areas in our daily life where manual processes are used. Taking as an example in the water control and management systems, where many authorities use manual systems for water controland management. Especially nowadays most of the countriesare still using manual system for controlling and monitoring the dams. Due to the complicated and time consuming process in a manual system, a model for Remote Monitoring and Controlling of Dams is proposed that uses remote control technology, linked to the web technology, to attain great success in monitoring and controlling water levels in managing dams. This paper is to present a new solution which it is to implemental proposed system called as RMCD ""Remote Monitoring and Controlling of Dams"". With the proposed system it will allow the user to control and monitor the dams remotely which it is saving a lot of efforts, reducing the cost and also increasing the monitoring quality as the users are going to use automated system rather than using of manual system. Shaik Roshan | Dr. M. Muthuvinayagam | S. Manivannan ""IoT Based Remote Monitoring and Controlling for Shutter Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,
URL: https://www.ijtsrd.com/papers/ijtsrd30123.pdf
Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30123/iot-based-remote-monitoring-and-controlling-for-shutter-systems/shaik-roshan
The Internet of Things (IoT) has provided promising opportunities to create powerful industrial and domestic applications. One of its main applications is smart metering. The existing analogue meter in residential area requires consistent human monitoring, which leads to computational errors. Huge labor force, their negligence and money invested are the drawback of such meters. Therefore, a cost effective and low power smart-meter that can monitor the daily consumption of water in residential area need to be developed, in order to conserve water. Here in this research, SOC based smart water meter is developed to provide cost effective solution. Further, the developed system is implemented in real time to investigate the reliability and feasibility.
IoT Based Water Quality Monitoring System for Smart CitiesYogeshIJTSRD
Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
In this research, the proposed system is to design and construct IoT based healthcare monitoring system using ESP8266 Node MCU that supports healthcare system under circumstances for people. IoT based healthcare monitoring system is evaluated for certain parameter like heartbeat and temperature. This system consists of Node MCU, Temperature Sensor, Heartbeat Sensor, IoT, SPSS, Thinger.io cloud sever and mobile phone. Node MCU board collects temperature and heartbeat data from the sensors and transfer wirelessly to IoT website via internet connection 1 . This data can be transmitted to the data set linked with SPSS software and this software can be calculated the future data for people using linear regression method. So, Mobile health system helps to know health conditions in real time to people. The aim of this system is to improve the healthcare system by using internet and easily to measure their condition of health from home. Su Hlaing Phyo | Kyaw Zin Latt ""Analysis on Healthcare System using IoT"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25140.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25140/analysis-on-healthcare-system-using-iot/su-hlaing-phyo
Internet of Things IoT conceptualizes the idea of remotely connecting and monitoring real world objects things through the Internet. When it comes to a house, this concept can be aptly incorporated to make it smarter, safer and automated. This project presents an approach to incorporate a two level biometric based security system in deploying Internet of Things IoT for smart home system, together with due consideration given to user convenience in operating the system using an android based application to monitor, control the electronic appliances in the house. The objective of the proposed system is to ensure that the access to enter the house and thereby render the services of certain automated electronic applications are only by the legitimate users, and not anyone else. By using biometrics it is possible to confirm or establish an individual's identity. Biometrics has the potential to make authentication dramatically faster, easier and more secure than traditional passwords. This project adds mainly four features security, safety, control and monitoring to home automation. This approach ensures to provide all the operations done smartly thus avoiding any manual interventions until necessary. This project differentiates itself from others as it provides a low cost effective, compact and reliable secured home control and monitoring system with the aid of biometric fingerprint authentication and biometric face recognition systems for access and to control the equipment and devices remotely using an application over a portable Android device. The proposed system is implemented on atmega328 based arduino microcontroller board. Face recognition is achieved using matlab. Dr. B. Kedarnath | M. Lalitha Priya | G. Anusha | K. Vamshi "A Secure IoT Enabled Smart Home System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31010.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31010/a-secure-iot-enabled-smart-home-system/dr-b-kedarnath
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
IoT Based Detection of Leakages in Gas Pipesijtsrd
In industries leakage of Gas in the pipeline is a major issue nowadays. Leakage is defined as the accidental admission or escape of fluid through a hole or crack from the pipe. Gas leakages lead to losses as well as fire accidents. This project takes the control over automatic detection of leakages than the man power and thus reduce loss. Here we propose an inventive robot that clings on to the outer surface of the gas pipe and moves along the pipe to check for leakages. The kit consists of MQ5 gas sensor to detect the gas leakages. The robot moves continuously along the metal pipe, if there any presence of leakage the particular position is sensed by ultrasonic sensor and the message is send to the IOT through Wi Fi module. P. Anitha | K. Saranya ""IoT Based Detection of Leakages in Gas Pipes"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23722.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23722/iot-based-detection-of-leakages-in-gas-pipes/p-anitha
IoT Based Remote Monitoring and Controlling for Shutter Systemsijtsrd
The technological advancement of the current technology has affected the processes of the most of the economic and social related businesses. The aims of this advancement are to serve and make human life more comfortable and however, there are still lots of areas in our daily life where manual processes are used. Taking as an example in the water control and management systems, where many authorities use manual systems for water controland management. Especially nowadays most of the countriesare still using manual system for controlling and monitoring the dams. Due to the complicated and time consuming process in a manual system, a model for Remote Monitoring and Controlling of Dams is proposed that uses remote control technology, linked to the web technology, to attain great success in monitoring and controlling water levels in managing dams. This paper is to present a new solution which it is to implemental proposed system called as RMCD ""Remote Monitoring and Controlling of Dams"". With the proposed system it will allow the user to control and monitor the dams remotely which it is saving a lot of efforts, reducing the cost and also increasing the monitoring quality as the users are going to use automated system rather than using of manual system. Shaik Roshan | Dr. M. Muthuvinayagam | S. Manivannan ""IoT Based Remote Monitoring and Controlling for Shutter Systems"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-2 , February 2020,
URL: https://www.ijtsrd.com/papers/ijtsrd30123.pdf
Paper Url : https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/30123/iot-based-remote-monitoring-and-controlling-for-shutter-systems/shaik-roshan
The Internet of Things (IoT) has provided promising opportunities to create powerful industrial and domestic applications. One of its main applications is smart metering. The existing analogue meter in residential area requires consistent human monitoring, which leads to computational errors. Huge labor force, their negligence and money invested are the drawback of such meters. Therefore, a cost effective and low power smart-meter that can monitor the daily consumption of water in residential area need to be developed, in order to conserve water. Here in this research, SOC based smart water meter is developed to provide cost effective solution. Further, the developed system is implemented in real time to investigate the reliability and feasibility.
IoT Based Water Quality Monitoring System for Smart CitiesYogeshIJTSRD
Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
In this research, the proposed system is to design and construct IoT based healthcare monitoring system using ESP8266 Node MCU that supports healthcare system under circumstances for people. IoT based healthcare monitoring system is evaluated for certain parameter like heartbeat and temperature. This system consists of Node MCU, Temperature Sensor, Heartbeat Sensor, IoT, SPSS, Thinger.io cloud sever and mobile phone. Node MCU board collects temperature and heartbeat data from the sensors and transfer wirelessly to IoT website via internet connection 1 . This data can be transmitted to the data set linked with SPSS software and this software can be calculated the future data for people using linear regression method. So, Mobile health system helps to know health conditions in real time to people. The aim of this system is to improve the healthcare system by using internet and easily to measure their condition of health from home. Su Hlaing Phyo | Kyaw Zin Latt ""Analysis on Healthcare System using IoT"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25140.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/25140/analysis-on-healthcare-system-using-iot/su-hlaing-phyo
Internet of Things IoT conceptualizes the idea of remotely connecting and monitoring real world objects things through the Internet. When it comes to a house, this concept can be aptly incorporated to make it smarter, safer and automated. This project presents an approach to incorporate a two level biometric based security system in deploying Internet of Things IoT for smart home system, together with due consideration given to user convenience in operating the system using an android based application to monitor, control the electronic appliances in the house. The objective of the proposed system is to ensure that the access to enter the house and thereby render the services of certain automated electronic applications are only by the legitimate users, and not anyone else. By using biometrics it is possible to confirm or establish an individual's identity. Biometrics has the potential to make authentication dramatically faster, easier and more secure than traditional passwords. This project adds mainly four features security, safety, control and monitoring to home automation. This approach ensures to provide all the operations done smartly thus avoiding any manual interventions until necessary. This project differentiates itself from others as it provides a low cost effective, compact and reliable secured home control and monitoring system with the aid of biometric fingerprint authentication and biometric face recognition systems for access and to control the equipment and devices remotely using an application over a portable Android device. The proposed system is implemented on atmega328 based arduino microcontroller board. Face recognition is achieved using matlab. Dr. B. Kedarnath | M. Lalitha Priya | G. Anusha | K. Vamshi "A Secure IoT Enabled Smart Home System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-4 , June 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31010.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/31010/a-secure-iot-enabled-smart-home-system/dr-b-kedarnath
In recent years, many of the bridges are monitored using non-destructive testing methods. These methods are used for checking the structural damage, wreckage, strength of the bridges. To reduce the human losses, economic losses, protect the strength and structure of bridge we are introducing a smart bridge monitoring using sensors where it gives high and low values depending upon the problem occurred in the bridge. Now a day we are in hike of power supply, so we are using Wireless Sensor Networks (WSN) technology for regular monitoring of the bridge which consumes less power with accurate values. This project describes the real time working and getting real time values. Outcome of the project is to bring a product based module. R. Dhivya Devi | S. Dinesh | S. Gowri Shankar | K. Ravi Teja"Pontem Monitoring using IoT" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-3 , April 2018, URL: http://www.ijtsrd.com/papers/ijtsrd11517.pdf http://www.ijtsrd.com/engineering/electronics-and-communication-engineering/11517/pontem-monitoring-using-iot/r-dhivya-devi
Since the development of advanced metering and digital technology, Smart City has been equipped based on things IOT in different electronic devices, and therefore smarter than before. The purpose of this paper is to carry out the concept of smart cities and their motivation and application of a comprehensive review. In addition, the survey describes the intelligent networking technology and smart cities and major components of urban functions. This also explains the major challenges and experiences around the world. Mukesh Kumawat | Mr. Durgesh Kumar | Dr. Garima Mathur ""IOT Based Smart Cities"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23246.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23246/iot-based-smart-cities/mukesh-kumawat
Smart Water Monitoring System using Cloud Serviceijtsrd
Water is the basic need for survival. Hence, the wastage of it is not tolerable. Water scarcity is the lack of sufficient available water resources to meet water needs within a region. Its effects are spread all over the world and around 2.8 billion people are affected by it. More than 1.2 billion people lack access to clean drinking water. Therefore, water monitoring has become an important subject of matter. The project Water Monitoring System for Smart Village using cloud service, as the name says it is all about monitoring of water right from small villages, townships to entire urban infrastructure. The project deals with the efficient monitoring of water using Internet of Things IoT technology enabled by sensors. The sensor network can be flexible expanded and shrunk according to the requirements of setup. It is used for remotely controlling the water flow, cutting the water supply, monitoring and analyzing the water usage across the nodes, with the help of cloud connectivity. Further, more statistical data can be gathered and can be used by govt. authorities for defining policies, strategies and billing calculations. So ultimately, this will help to conserve and efficiently utilize the natural resource. Using IoT takes into account of waste wastage right from small village to large scale. It can also control the water usage in a precise way. Divya YA "Smart Water Monitoring System using Cloud Service" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd21379.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/21379/smart-water-monitoring-system-using-cloud-service/divya-ya
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
Implementation of Internet of Things for Water Quality Monitoringijtsrd
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time consuming. The system for monitoring the water quality in the Internet of Things IoT consists of a number of sensors which are used for measuring the parameters of the water these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office using thinger.io which is an open source IoT platform as free server data can be continuously pushed on the cloud so we can see data in real time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller. Priya S. Bhagat | Dr. Vijay S. Gulhane | Prof. Tanuj S. Rohankar ""Implementation of Internet of Things for Water Quality Monitoring"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23655.pdf
Paper URL: https://www.ijtsrd.com/engineering/information-technology/23655/implementation-of-internet-of-things-for-water-quality-monitoring/priya-s-bhagat
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
Since the development of advanced metering and digital technology, Smart City has been equipped based on things IOT in different electronic devices, and therefore smarter than before. The purpose of this paper is to carry out the concept of smart cities and their motivation and application of a comprehensive review. In addition, the survey describes the intelligent networking technology and smart cities and major components of urban functions. This also explains the major challenges and experiences around the world. Mukesh Kumawat | Mr. Durgesh Kumar | Dr. Garima Mathur ""IOT Based Smart Cities"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-3 , April 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23246.pdf
Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/23246/iot-based-smart-cities/mukesh-kumawat
Smart Water Monitoring System using Cloud Serviceijtsrd
Water is the basic need for survival. Hence, the wastage of it is not tolerable. Water scarcity is the lack of sufficient available water resources to meet water needs within a region. Its effects are spread all over the world and around 2.8 billion people are affected by it. More than 1.2 billion people lack access to clean drinking water. Therefore, water monitoring has become an important subject of matter. The project Water Monitoring System for Smart Village using cloud service, as the name says it is all about monitoring of water right from small villages, townships to entire urban infrastructure. The project deals with the efficient monitoring of water using Internet of Things IoT technology enabled by sensors. The sensor network can be flexible expanded and shrunk according to the requirements of setup. It is used for remotely controlling the water flow, cutting the water supply, monitoring and analyzing the water usage across the nodes, with the help of cloud connectivity. Further, more statistical data can be gathered and can be used by govt. authorities for defining policies, strategies and billing calculations. So ultimately, this will help to conserve and efficiently utilize the natural resource. Using IoT takes into account of waste wastage right from small village to large scale. It can also control the water usage in a precise way. Divya YA "Smart Water Monitoring System using Cloud Service" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-2 , February 2019, URL: https://www.ijtsrd.com/papers/ijtsrd21379.pdf
Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/21379/smart-water-monitoring-system-using-cloud-service/divya-ya
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
Implementation of Internet of Things for Water Quality Monitoringijtsrd
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time consuming. The system for monitoring the water quality in the Internet of Things IoT consists of a number of sensors which are used for measuring the parameters of the water these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office using thinger.io which is an open source IoT platform as free server data can be continuously pushed on the cloud so we can see data in real time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller. Priya S. Bhagat | Dr. Vijay S. Gulhane | Prof. Tanuj S. Rohankar ""Implementation of Internet of Things for Water Quality Monitoring"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23655.pdf
Paper URL: https://www.ijtsrd.com/engineering/information-technology/23655/implementation-of-internet-of-things-for-water-quality-monitoring/priya-s-bhagat
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
Automatic Water Level Controller for Overhead and Underground Water TankIJAEMSJORNAL
This is an Arduino-based automatic water level controller. Here, we are going to measure the water level with the help of Float switch fluid level controller sensors. The Float switch fluid level controller sensors use the principle of a “2-way switch”. The motor pump automatically turns ON when the water level is low. There is a lot of drinking water crisis in India and also in other countries. Today we need to preserve water at any cost. In India, we can see many houses as overhead tanks and they keep on overflowing water. It wastes a lot of water as well as electricity. If we do not do anything on this matter, then we can face a huge scarcity of water. In this project, implement an automatic water level controller so that we no longer have to manually switch ON and switch OFF the motor. The device automatically detects the water level, when it is low, hence triggering the relay which turns on the motor. This helps in reducing wastage of water as well as electricity. This also reduces manpower as we no longer need to operate it manually.
Recycling of Industrial Waste Water for the Generation of Electricity by Regu...IJAAS Team
The paper focuses on generating the renewable energy source from industrial waste water effluents. Utilizing the industrial waste water in order to generate electricity, a flow control sensor has been installed at the outlet of the tunnel which passes the waste water to the turbine. As per the need, the generation of electricity varies with respect to the flow through the use of flow control sensor. The generated electricity is then used for powering the street lights, gardening and run-way paths, during night time. The flow control sensor when integrated using IoT and cloud storage facilitates efficiency and scalability thereby providing massive utilization of energy usage.
Similar to IRJET-Smart Controlling and Monitoring of Water System (20)
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
NO1 Uk best vashikaran specialist in delhi vashikaran baba near me online vas...Amil Baba Dawood bangali
Contact with Dawood Bhai Just call on +92322-6382012 and we'll help you. We'll solve all your problems within 12 to 24 hours and with 101% guarantee and with astrology systematic. If you want to take any personal or professional advice then also you can call us on +92322-6382012 , ONLINE LOVE PROBLEM & Other all types of Daily Life Problem's.Then CALL or WHATSAPP us on +92322-6382012 and Get all these problems solutions here by Amil Baba DAWOOD BANGALI
#vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore#blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #blackmagicforlove #blackmagicformarriage #aamilbaba #kalajadu #kalailam #taweez #wazifaexpert #jadumantar #vashikaranspecialist #astrologer #palmistry #amliyaat #taweez #manpasandshadi #horoscope #spiritual #lovelife #lovespell #marriagespell#aamilbabainpakistan #amilbabainkarachi #powerfullblackmagicspell #kalajadumantarspecialist #realamilbaba #AmilbabainPakistan #astrologerincanada #astrologerindubai #lovespellsmaster #kalajaduspecialist #lovespellsthatwork #aamilbabainlahore #Amilbabainuk #amilbabainspain #amilbabaindubai #Amilbabainnorway #amilbabainkrachi #amilbabainlahore #amilbabaingujranwalan #amilbabainislamabad
About
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Technical Specifications
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
Key Features
Indigenized remote control interface card suitable for MAFI system CCR equipment. Compatible for IDM8000 CCR. Backplane mounted serial and TCP/Ethernet communication module for CCR remote access. IDM 8000 CCR remote control on serial and TCP protocol.
• Remote control: Parallel or serial interface
• Compatible with MAFI CCR system
• Copatiable with IDM8000 CCR
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
Application
• Remote control: Parallel or serial interface.
• Compatible with MAFI CCR system.
• Compatible with IDM8000 CCR.
• Compatible with Backplane mount serial communication.
• Compatible with commercial and Defence aviation CCR system.
• Remote control system for accessing CCR and allied system over serial or TCP.
• Indigenized local Support/presence in India.
• Easy in configuration using DIP switches.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.