Since from the last centuries, water has been affected due to many parameters and actions done by human beings. Due to these actions drinking water becomes dangerous and harmful with increase in living population and also due to global warming and changes in natural climate. So, in upcoming generation we need safe drinking water for all living things. For these safety measures we need to first monitor the quality of the drinking water. In earlier days, people used some manual types of measurements for monitoring the water. But it takes more time and it has less efficiency. So, we need a better idea to check the quality of the water because water is more essential for all living things. By considering all these necessities, we develop a new methodology for monitoring the quality of the given water using IOT environment with low level of cost and with high efficiency. We also ensure real time data value by developing a web application using wi fi module, which can be accessed at anywhere. A. Guna Selvi | S. Vibhithra | A. John Clement Sunder "IoT Based Water Quality Monitoring System for Smart Cities" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-3 , April 2021, URL: https://www.ijtsrd.com/papers/ijtsrd40058.pdf Paper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/40058/iot-based-water-quality-monitoring-system-for-smart-cities/a-guna-selvi
Iot based water quality monitoring systemBinayakreddy
As per increase in water pollution there is need of controlling pollution in water is finished by monitoring water quality.
Our system consists of various sensors which will compute the standard values of water in real time for effective action and is accurate and only less manpower required.
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
Iot based water quality monitoring systemBinayakreddy
As per increase in water pollution there is need of controlling pollution in water is finished by monitoring water quality.
Our system consists of various sensors which will compute the standard values of water in real time for effective action and is accurate and only less manpower required.
IoT Based Water Level Monitoring System with an Android Applicationrahulmonikasharma
The principle objective of our assignment is to display the water level as well as controlling with IoT and android application. Wastage of water within the modern state of affairs, merely because of overflowing tanks isn't less expensive. Conventional water tanks can neither reveal nor manage the water stage in tank, main to huge amount of wastage. A few different technologies had sure drawbacks in a few or the alternative way. The want of removal of those quick-comings and offering an efficient and competitively priced solution has been the principle focus of this assignment. The IoT platform we are using is Arduino which is an open source. The water level within the water tank is split into most, minimal and nominal degrees indicated by using exclusive colorings for each. An ultrasonic sensor is positioned on the floor of the tank to sense the water stage and the distance is dispatched to the android utility through Arduino. We can display the tank manually using an on/off button provided within the android utility. The android application is a user interface which displays the tank format, a button for guide operation and a led for indicating the motor popularity.
With the increase in need of water for irrigation, there is also a case where we use more water for irrigation than it’s needed for crops. That results in the wastage of water and causes the problem in the growth of crops. To overcome this problem, this paper puts together a study of a system based on Irrigation using IOT (Internet of things). This system targets on sensing the soil moisture and temperature using the sensors and provide the data to the Thing speak server after which the farmer can decide whether to ON or OFF the pump.
Implementation of Internet of Things for Water Quality Monitoringijtsrd
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time consuming. The system for monitoring the water quality in the Internet of Things IoT consists of a number of sensors which are used for measuring the parameters of the water these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office using thinger.io which is an open source IoT platform as free server data can be continuously pushed on the cloud so we can see data in real time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller. Priya S. Bhagat | Dr. Vijay S. Gulhane | Prof. Tanuj S. Rohankar ""Implementation of Internet of Things for Water Quality Monitoring"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23655.pdf
Paper URL: https://www.ijtsrd.com/engineering/information-technology/23655/implementation-of-internet-of-things-for-water-quality-monitoring/priya-s-bhagat
This project uses soil moisture sensor and if the soil is dry, a mechanism to water the soil is set into motion. The whole circuit is controlled by the micro-controller based Arduino Uno Development Board.
Water scarcity nowadays is a big concern for farmers and with this growing population of our country agriculture becomes a serious and main problem that our framers are facing today. The main objective of the project is providing automatic irrigation system that switches a motor pump ONOFF by sensing moisture content of the soil through application of Internet of Things (IOT). Human intervention can be reduced by proper method of irrigation. The project consists of Arduino microcontroller and sensor, where Arduino microcontroller is programmed to receive the input signal of varying moisture condition of the soil through sensor. Once the controller receives these signal, the output then relay on operating the water pump. The sensing arrangement is made up of two metallic rods inserted to the agriculture field which is required to be controlled. Priyanka Lahande | Dr. Basavaraj Mathpathi"IoT Based Smart Irrigation System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, URL: http://www.ijtsrd.com/papers/ijtsrd15827.pdf http://www.ijtsrd.com/computer-science/embedded-system/15827/iot-based-smart-irrigation-system/priyanka-lahande
This presentation discuss about the Ultrasonic Sensor along with its working principle and simple test with sample of Arduino program. The ultrasonic Sensor featured in this presentation is HC-SR04.
Internet of Things IoT Based Healthcare Monitoring System using NodeMCU and A...ijtsrd
Today Internet has become one of the important parts of daily life. It has changed how people live, work, play and learn. Internet serves for many purposes educations, finance, Business, Industries, Entertainment, Social Networking, etc. The IoT is connected objects to the Internet and used to control of those objects or remote monitoring. A health care monitoring system is necessary to constantly monitor the patient's physiological parameters. The main advantage of this system is that the results can be viewed at any time and place. The doctors can be notified by using mobile phones messages if patient health is abnormal. In this system, heartbeat sensor, temperature sensor and blood pressure sensor are used. The system can analyze the signal to detect normal or abnormal conditions. In the system, the internet of things IoT is becoming a major platform for many services and applications. The IoT is generally considered as connecting objects to the Internet and using that connection for control of those objects or remote monitoring. Khin Thet Wai | Nyan Phyo Aung | Lwin Lwin Htay "Internet of Things (IoT) Based Healthcare Monitoring System using NodeMCU and Arduino UNO" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26482.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26482/internet-of-things-iot-based-healthcare-monitoring-system-using-nodemcu-and-arduino-uno/khin-thet-wai
Flood is one of the natural disasters which cannot be avoided totally. Every year,
death rate due to flood increases because of absence of early warning. To solve this
problem, this paper demonstrates the idea and implementation of a Flood Monitoring
and Alerting system using Internet of Things (IOT) technology. This system comprises
of three parts. The first part measures the height of the water using ultrasonic distance
measuring sensor. The second part is sending the height information to web page
using the Ethernet shield. The third part is making call to residences to alert them
about flood through voice message. The call is made through the most popular mobile
standard Global System for Mobile Communication (GSM) and ARP33A3 is used to
play the recorded voice message.
With the increase in need of water for irrigation, there is also a case where we use more water for irrigation than it’s needed for crops. That results in the wastage of water and causes the problem in the growth of crops. To overcome this problem, this paper puts together a study of a system based on Irrigation using IOT (Internet of things). This system targets on sensing the soil moisture and temperature using the sensors and provide the data to the Thing speak server after which the farmer can decide whether to ON or OFF the pump.
Implementation of Internet of Things for Water Quality Monitoringijtsrd
To make sure the safe supply of the drinking water the quality of the water needs to be monitored. As the monitoring of the water parameter is a complex process as it has been going through several laboratory testing processes and though it is time consuming. The system for monitoring the water quality in the Internet of Things IoT consists of a number of sensors which are used for measuring the parameters of the water these parameters are temperature, pH, turbidity, and CO2 of the water. The measured values of the parameter from the sensors can be processed by Arduino pro mini microcontroller which can be used as a core controller. System focus on continuous monitoring of water in the IOT platform. Internet of things is the network of physical objects embedded with electronics, sensors, software, and network connectivity. Monitoring water parameter can be done from anywhere as a central office using thinger.io which is an open source IoT platform as free server data can be continuously pushed on the cloud so we can see data in real time operation. Sensors are connected with the Arduino pro mini and this can send the parameter value to the Wi Fi module ESP8266 which require internet for sending this parameter values to thinger.io from the thinger.io anyone can see the real time values of the water parameter and these values are also shown on the LCD16×2 screen which is connected to the microcontroller. Priya S. Bhagat | Dr. Vijay S. Gulhane | Prof. Tanuj S. Rohankar ""Implementation of Internet of Things for Water Quality Monitoring"" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-4 , June 2019, URL: https://www.ijtsrd.com/papers/ijtsrd23655.pdf
Paper URL: https://www.ijtsrd.com/engineering/information-technology/23655/implementation-of-internet-of-things-for-water-quality-monitoring/priya-s-bhagat
This project uses soil moisture sensor and if the soil is dry, a mechanism to water the soil is set into motion. The whole circuit is controlled by the micro-controller based Arduino Uno Development Board.
Water scarcity nowadays is a big concern for farmers and with this growing population of our country agriculture becomes a serious and main problem that our framers are facing today. The main objective of the project is providing automatic irrigation system that switches a motor pump ONOFF by sensing moisture content of the soil through application of Internet of Things (IOT). Human intervention can be reduced by proper method of irrigation. The project consists of Arduino microcontroller and sensor, where Arduino microcontroller is programmed to receive the input signal of varying moisture condition of the soil through sensor. Once the controller receives these signal, the output then relay on operating the water pump. The sensing arrangement is made up of two metallic rods inserted to the agriculture field which is required to be controlled. Priyanka Lahande | Dr. Basavaraj Mathpathi"IoT Based Smart Irrigation System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-2 | Issue-5 , August 2018, URL: http://www.ijtsrd.com/papers/ijtsrd15827.pdf http://www.ijtsrd.com/computer-science/embedded-system/15827/iot-based-smart-irrigation-system/priyanka-lahande
This presentation discuss about the Ultrasonic Sensor along with its working principle and simple test with sample of Arduino program. The ultrasonic Sensor featured in this presentation is HC-SR04.
Internet of Things IoT Based Healthcare Monitoring System using NodeMCU and A...ijtsrd
Today Internet has become one of the important parts of daily life. It has changed how people live, work, play and learn. Internet serves for many purposes educations, finance, Business, Industries, Entertainment, Social Networking, etc. The IoT is connected objects to the Internet and used to control of those objects or remote monitoring. A health care monitoring system is necessary to constantly monitor the patient's physiological parameters. The main advantage of this system is that the results can be viewed at any time and place. The doctors can be notified by using mobile phones messages if patient health is abnormal. In this system, heartbeat sensor, temperature sensor and blood pressure sensor are used. The system can analyze the signal to detect normal or abnormal conditions. In the system, the internet of things IoT is becoming a major platform for many services and applications. The IoT is generally considered as connecting objects to the Internet and using that connection for control of those objects or remote monitoring. Khin Thet Wai | Nyan Phyo Aung | Lwin Lwin Htay "Internet of Things (IoT) Based Healthcare Monitoring System using NodeMCU and Arduino UNO" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-5 , August 2019, URL: https://www.ijtsrd.com/papers/ijtsrd26482.pdfPaper URL: https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/26482/internet-of-things-iot-based-healthcare-monitoring-system-using-nodemcu-and-arduino-uno/khin-thet-wai
Flood is one of the natural disasters which cannot be avoided totally. Every year,
death rate due to flood increases because of absence of early warning. To solve this
problem, this paper demonstrates the idea and implementation of a Flood Monitoring
and Alerting system using Internet of Things (IOT) technology. This system comprises
of three parts. The first part measures the height of the water using ultrasonic distance
measuring sensor. The second part is sending the height information to web page
using the Ethernet shield. The third part is making call to residences to alert them
about flood through voice message. The call is made through the most popular mobile
standard Global System for Mobile Communication (GSM) and ARP33A3 is used to
play the recorded voice message.
Low Cost Design of Water Quality Monitoring Systemijtsrd
According to the annual rankings of world economic forum, the issue related with quality of water has increased gradually. As per the records, millions of people especially small children die due to the bad quality of water. One of the main reasons is the unavailability of cheap water quality monitoring system available at such locations. Thus, to ensure the safety of people considering water quality, a low cost design for monitoring water quality has been proposed in this paper. The system uses microcontroller, display LCD, etc. whereas the various parameters considered includes pH, turbidity, TDS and temperature of sample water. The proposed design ensures the low cost factor of the system along with displaying the quality of water. Raghav Arora | Sahil Mehta "Low Cost Design of Water Quality Monitoring System" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-5 , August 2020, URL: https://www.ijtsrd.com/papers/ijtsrd32913.pdf Paper Url :https://www.ijtsrd.com/engineering/electronics-and-communication-engineering/32913/low-cost-design-of-water-quality-monitoring-system/raghav-arora
IoT Based Water Level Meter for Alerting Population about Floodsijtsrd
The most important thing before, during and after a disaster is the dissemination of information, the deployment of IoT enabled devices Internet of Things which can bring benefits in terms of providing people with the right decision making information in the face of this disaster. In this paper, we introduce a sensor for measuring water quality in rivers, lakes, ponds and streams. To prove our idea, weve developed a pilot project using a small scale model used for water based sensors based on an open circuit that meets water and is tested horizontally in a water container under a controlled environment. Ashwin Kumar V | Bharanidharan N | Bharanidharan S | Vanaja. C "IoT Based Water Level Meter for Alerting Population about Floods" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-4 | Issue-6 , October 2020, URL: https://www.ijtsrd.com/papers/ijtsrd31714.pdf Paper Url: https://www.ijtsrd.com/engineering/electrical-engineering/31714/iot-based-water-level-meter-for-alerting-population-about-floods/ashwin-kumar-v
Low-Cost Sensor Network for Contamination Detection in Drinking WaterIJERA Editor
This paper deals with the low cost and holistic approach to the water quality monitoring for drinking water
distribution systems. Our approach is based on the development of low cost sensor nodes for real time water
contamination monitoring using web based technology. The main sensor node consists of several
electrochemical and optical sensors and emphasis is given on low cost, light-weight implementation, and
reliable long time operation. We will interface the values of sensors to the internet by using the software python.
The internet network would be used to monitoring the results of drinking water values.
Cosmetics are defined as “items with mild action on the human body for the purpose of cleaning, beautifying, adding to the attractiveness, altering the appearance, or keeping or promoting the skin or hair in good condition- while functional cosmetics, even if falling under the cosmetic definition, are designated as “items fulfilling specific actions like skin whitening, minimizing the appearance of lines in the face and body, protecting from the sun and sun tanning-. Ahiya Noor | Dr. Gaurav Kumar Sharma | Dr. Kaushal Kishore Chandrul "Cosmetic Science: An Overview" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45135.pdf Paper URL: https://www.ijtsrd.com/pharmacy/other/45135/cosmetic-science-an-overview/ahiya-noor
Standardization and Formulations of Calotropis ProceraYogeshIJTSRD
Plants growing in arid regions have elicited increased attention, because the hostile environment, in which these plants survive, forces them to develop chemical protective systems through adaptation which is rarely found in vegetation of other ecosystems. Furthermore, many of the plants grow in areas, where the dependence on traditional, plant based medicines over industrially produced pharmaceuticals persists to this day. The two plants, Calotopris Procera giant milkweed, also named C. Persica and Calotropis gigantea crown ower , have been used widely in traditional medicine in North Africa, the Middle East, and South and South East Asia. This has led to extensive research on the chemical constituents of the plants. Both plants are known to be sources of cardenolides, and newer research has yielded a number of interesting cancer active constituents. In addition, extracts of both plants have remarkable nematocidal, molluscidal and insecticidal activities. In many regions, the wood of Calotropis plants has been used as a building material and as a source of fuel. In addition, certain parts of the plants have been used as feed for livestock. In other regions, Calotropis plants are seen as invasive species that threaten local plant life and that due to their toxicity also pose a threat to grazing eld animals. Jaffar Khan | Pankaj Chasta | Dr. Gaurav Kumar Sharma | Dr. Kaushal Kishore Chandrul "Standardization and Formulations of Calotropis Procera" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45145.pdf Paper URL: https://www.ijtsrd.com/pharmacy/other/45145/standardization-and-formulations-of-calotropis-procera/jaffar-khan
Review of the Diagnosis and Treatment of ParalysisYogeshIJTSRD
Paralysis is a complete loss of motor power in any muscle group. When paralysis affects all four extremities, it is called quadriplegia when it affects only the lower extremities, paraplegia and when it affects the extremities on one side of the body, hemiplegic. For this reason, the term paralysis is generally reserved for more focal, less stereotyped weakness, for instance, affecting all the muscles innervated by a peripheral nerve. Many different anatomical lesions and etiologies can cause paralysis and determine its treatment. Bikash Debsingha | Dr. Gourav Kr. Sharma | Dr. Kausal Kishore Chandrul "Review of the Diagnosis and Treatment of Paralysis" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45108.pdf Paper URL: https://www.ijtsrd.com/pharmacy/pharmacology-/45108/review-of-the-diagnosis-and-treatment-of-paralysis/bikash-debsingha
Comparative Analysis of Forced Draft Cooling Tower Using Two Design Methods A...YogeshIJTSRD
Cooling towers make use of evaporation whereby some of the water is evaporated into a moving air stream and subsequently discharged into the atmosphere which results in cooling of the remainder water. The current research reviews various studies conducted on cooling tower using experimental and numerical techniques. Different design configuration and operating conditions on cooling towers are evaluated by various researchers. Significant findings from researches have shown new and improved design of cooling tower with much better performance as compared to conventional design. Neetish Kumar Sao | Dr. Surendra K. Dwivedi "Comparative Analysis of Forced Draft Cooling Tower Using Two Design Methods: A Review" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45100.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/45100/comparative-analysis-of-forced-draft-cooling-tower-using-two-design-methods-a-review/neetish-kumar-sao
Criminology Educators Triumphs and StrugglesYogeshIJTSRD
This research study is geared on determining the triumphs and struggles of criminology educators. Included on the aim is to know their experiences and story being considered as teacher by accident. A qualitative research design was applied in this study. Researchers conducted a personal interview with the respondents with the aid of a guide questions which all points to main issue of this study. The findings of the study revealed that out of seven respondents, four are on the age bracket of 21 to 25 years old, two respondents are on the age bracket of 26 to 30 years old and a single respondent is on the age bracket of 36 to 40 years. Most of the respondents find enthusiasm in teaching and are aware that there is a need for them to proceed in post graduate studies for them to have a considerable salary. As to financial stability, only 1out of 7 considers herself as financially stable. The rest are saying that as of the moment, they are not yet financially stable basing on the rate of their salary. Qualification matters a lot in the field of academe because this was being shared by one of the respondents who considers herself as financially stable. Also, all of the respondents do not consider teaching as their first career of choice but most of them does not have any plan of shifting to another career. Girlie N. Cañete | Harry Santiago P. Achas | Pamela N. Cañete "Criminology Educators: Triumphs and Struggles" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45082.pdf Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/education/45082/criminology-educators-triumphs-and-struggles/girlie-n-cañete
A Review Herbal Drugs Used in Skin DisorderYogeshIJTSRD
The human bodys skin is an organ that allows it to interact with the environment while also shielding it from harmful external influences. People of all ages suffer from skin diseases all over the world. Its vital to keep your skin in good form for a healthy physique. Plants have been employed in some form or another since the beginning of time. This research has highlighted some prevalent skin disease issues, as well as the herbals utilized in disease therapy and the various formulations accessible in the pharmaceutical industry. Some medicinal plants have been shown to be quite effective in removing or reducing skin infection disorders. Chandramita Borah | Dr. Gaurav Kumar Sharma | Dr. Kaushal Kishore Chandrul "A Review: Herbal Drugs Used in Skin Disorder" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45118.pdf Paper URL: https://www.ijtsrd.com/pharmacy/other/45118/a-review-herbal-drugs-used-in-skin-disorder/chandramita-borah
Automatic Query Expansion Using Word Embedding Based on Fuzzy Graph Connectiv...YogeshIJTSRD
The aim of information retrieval systems is to retrieve relevant information according to the query provided. The queries are often vague and uncertain. Thus, to improve the system, we propose an Automatic Query Expansion technique, to expand the query by adding new terms to the user s initial query so as to minimize query mismatch and thereby improving retrieval performance. Most of the existing techniques for expanding queries do not take into account the degree of semantic relationship among words. In this paper, the query is expanded by exploring terms which are semantically similar to the initial query terms as well as considering the degree of relationship, that is, “fuzzy membership- between them. The terms which seemed most relevant are used in expanded query and improve the information retrieval process. The experiments conducted on the queries set show that the proposed Automatic query expansion approach gave a higher precision, recall, and F measure then non fuzzy edge weights. Tarun Goyal | Ms. Shalini Bhadola | Ms. Kirti Bhatia "Automatic Query Expansion Using Word Embedding Based on Fuzzy Graph Connectivity Measures" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45074.pdf Paper URL: https://www.ijtsrd.com/computer-science/artificial-intelligence/45074/automatic-query-expansion-using-word-embedding-based-on-fuzzy-graph-connectivity-measures/tarun-goyal
A New Proposal for Smartphone Based Drowsiness Detection and Warning System f...YogeshIJTSRD
This paper proposes a Smartphone based system for the detection of drowsiness in automotive drivers. The proposed system uses three stage drowsiness detection technique. The first stage uses the percentage of eyelid closure PERCLOS which is obtained by capturing images with the front camera of the Smartphone with a modified eye state classification method. The system uses near infrared lighting for illuminating the face of the driver during night driving. The second step uses the voiced to the unvoiced ratio VUR obtained from the speech data from the microphone, in the event PERCLOS crosses the threshold. The VUR is also compared with a threshold and if it is a value greater than that of the threshold, it moves on to the next verification stage. In the final verification stage, touch response is required within the stipulated time to declare whether the driver is drowsy or not and subsequently sound an alarm. To awake the driver, a vibrating mechanism is done and also the live GPS location is also sent to an emergency contact. We have studied eight other reference papers for the literature review. The system has three advantages over existing drowsiness detection systems. First, the three stage verification process makes the system more reliable. The second advantage is its implementation on an Android smart phone, which is readily available to most drivers or cab owners as compared to other general purpose embedded platforms. The third advantage is the use of SMS service to inform the control room as well as the passenger regarding the loss of attention of the driver. Abishek K Biju | Godwin Jolly | Asif Mohammed C A | Dr. Paul P Mathai | Derek Joseph "A New Proposal for Smartphone-Based Drowsiness Detection and Warning System for Automotive Drivers" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45083.pdf Paper URL: https://www.ijtsrd.com/engineering/computer-engineering/45083/a-new-proposal-for-smartphonebased-drowsiness-detection-and-warning-system-for-automotive-drivers/abishek-k-biju
Data Security by AES Advanced Encryption StandardYogeshIJTSRD
Now a days with the rapid development of multimedia technologies, research on safety and security are becoming more important. Multimedia data are generated and transmitted through the communication channels and the wireless media. The efficiencies of encryption based on different existing algorithms are not up to the satisfactory limit. Hence researchers are trying to modify the existing algorithm or even develop new algorithms that help to increase security with a little encryption time. Here in this paper, we have furnished a new technology to modify the AES algorithm which gives more security with a little encryption time and which can be used to encrypt using 128 bit key. Theoretical analysis on the proposed algorithm with the existing reveals the novelty of our work. Here we have proposed a technique to randomize the key and hidden the key data into an encrypted digital image using the basics concept of cryptography and also using the concept of digital watermarking, the concept of key hide has also been encrypted. We have also proposed a new technique to reposition the pixels to break the correlation between them. So, the proposed scheme offers a more secure and cost effective mechanism for encryption. Next on the AES criteria list good performance. Widespread market adoption will require reasonably good performance on a variety of platforms, ranging from easy tocrack smart cards to the largest servers. Good algorithm performance includes speed for the encryption and decryption process as well as the key schedule. Prateek Goyal | Ms. Shalini Bhadola | Ms. Kirti Bhatia "Data Security by AES (Advanced Encryption Standard)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45073.pdf Paper URL: https://www.ijtsrd.com/computer-science/computer-security/45073/data-security-by-aes-advanced-encryption-standard/prateek-goyal
Antimicrobial and Phytochemical Screening of Phyllantus NiruriYogeshIJTSRD
Theorigin of Phyllanthus niruri is tropical America from there it spread as a weed to other tropic and sub tropics. It is a tropical annual herb shrub which grows as weed in moist humid waste land. Phyllanthus niruri is among more than 500 Phyllanthus species that are widely spread in temperate and tropical climates region Lizuka et al., 2007. It grows 30 40 cm in height, has small leaves and yellow flowers the stem has green capsule, and blooms with flowers with 5 white sepals and apical acute anther.38g of Mueller Hinton Agar was dissolved in 1000ml distilled water in a conical flask, the mouth of the conical flask was plugged with cotton woo wrapped in aluminium foil. This was sterilized in an autoclave at 121oC for 15mns. The media was removed and allowed to cool to 45oC, later poured into a sterilized plastic petri plates which were appropriately labeled. The present study revealed the antimicrobial activity and phytochemical screening of phyllanthus niruri. The antimicrobial activity of phyllanthus niruri shows great significant against pathogens which are responsible for common infections of skin, respiratory, urinary and gastrointestinal tracts. The phytochemical screening of oxalate, terpenoids, tannins, phenols, quinones, flavonoids, alkaloids, saponins and steroids were all found to be active within the plant. This bioactive phytochemicals present in P. niruri can be useful for further researches on the plant P. nururi since the phytochemicals have shown preclinical efficacies for treating human diseases’ which include hepatitis and HIV AIDS. This work has compiled the chemical constituents present and can be useful for further researches Dr. Mohammed Musa Lawan | Yusuf Sale Baba "Antimicrobial and Phytochemical Screening of Phyllantus Niruri" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd44948.pdf Paper URL: https://www.ijtsrd.com/chemistry/other/44948/antimicrobial-and-phytochemical-screening-of-phyllantus-niruri/dr-mohammed-musa-lawan
There is a need for temperature drop in a buried pipeline based on the media and process. Need of some methodology and design requirement for a set of conditions by reducing pipeline surface temperature and the temperature drops to atmospheric temperature at a particular distance of pipeline. Based on the conduction principle, desire reduction up to atmospheric temperature can be possible. Let us understand by below methods and design of Heat sink for buried pipe line. Natvarbhai Prabhudas Gajjar "Heat Sink for Underground Pipe Line" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45117.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45117/heat-sink-for-underground-pipe-line/natvarbhai-prabhudas-gajjar
Newly Proposed Multi Channel Fiber Optic Cable CoreYogeshIJTSRD
Fiber optic cables have single core and multiple core options, but single and multiple core fiber cable -˜s core design need to be updated. Newly proposed design gives facilities to multiple usage than traditional design of cable core. Cable core design needs improvement by using present technology for decreasing material and cost and by improving efficiency of cable. Research need to be carried out in this direction. What do you think Natvarbhai Prabhudas Gajjar "Newly Proposed Multi Channel Fiber-Optic Cable Core" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45116.pdf Paper URL: https://www.ijtsrd.com/engineering/other/45116/newly-proposed-multi-channel-fiberoptic-cable-core/natvarbhai-prabhudas-gajjar
Security Sector Reform toward Professionalism of Military and PoliceYogeshIJTSRD
The need to understand and at the same time give prescriptions for the direction of security reform in Third world countries after the end of World War II has prompted the emergence of a big project called the study of security reform SSR . Within this framework emerge various theories and strategies for security reform, with various variations, including ideological variations that underlie these theories. The reform of the structural aspect is a reform of the institutional and structure of an institution, the instrumental reform includes the reform of the system, laws and regulations, while the reform of the cultural aspect is a reform of the habits or organizational culture in institutions in general and in particular the Timor Leste’s security institutions, both military and police. Arquimino Ramos "Security Sector Reform toward Professionalism of Military and Police" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45061.pdf Paper URL: https://www.ijtsrd.com/humanities-and-the-arts/political-science/45061/security-sector-reform-toward-professionalism-of-military-and-police/arquimino-ramos
Stress An Undetachable Condition of LifeYogeshIJTSRD
Stressful life events affects human body, which may lead to cardiovascular diseases and effect metabolism and immune system. Recent studies showed increase in stress levels in developing countries. This study aimed to determine the stress levels in MBBS students. The objectives of the study are a To determine the current stress level, b To assess relation between stress level and lifestyle of college students. The present study was carried out in Ahmedabad City of Gujarat State. A total of 400 medical students were included in the study, which were selected using multi stage sampling aged between 18 years to 25 years. Students were questioned regarding their socioeconomic and life style parameters. The results showed that physical activity such as walking, exercise, yoga, meditation etc. were associated to stress levels. College students showed high stress levels with more satisfaction were mostly smokers. Their major reason for eating junk food and smoking was, increase in stress. Conclusion Majority of students suffered from moderate stress levels. Despite of having stress they were happy and satisfied with life with less no internet addiction. Spirituality and stress scales had a positive correlation as most of the students were averagely highly spiritual. Discriminant function can be used to determine the stress level of a person using age, BMI, internet addiction, spirituality, happiness scale and life satisfaction scale of that person. Jayshree N. Tolani | Dr. Nitinkumar D. Shah "Stress: An Undetachable Condition of Life" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45054.pdf Paper URL: https://www.ijtsrd.com/other-scientific-research-area/other/45054/stress-an-undetachable-condition-of-life/jayshree-n-tolani
Comparative Studies of Diabetes in Adult Nigerians Lipid Profile and Antioxid...YogeshIJTSRD
The study sought to determine the extent to which the usage of social media in the marketing of agricultural products in South West Nigeria can enhance farmers turnover. It employed the survey research design to collect data with the help of a structured questionnaire to elicit information from respondents selected from six 6 south western states. Research data were analysed using structural equation modelling. The results showed that the use of social media WhatsApp and Facebook in marketing of agricultural products significantly enhances farmers turnover. The managerial implication is that use of Whatsapp and Facebook in the marketing of agricultural products for the enhancement of farmers’ turnover was found to have significant influence on the enhancement in farmers’ turnover from agricultural products. Policy makers in government should provide the enabling environment for the telecommunication companies to enhance their reach by installing their facilities across the length and breadth of the country so that the network coverage will be strong at all times so that the benefits of social media usage will not be constrained. Egejuru, Leonard O | Akubugwo, Emmanuel I | Ugorji, Beatrice N "Comparative Studies of Diabetes in Adult Nigerians: Lipid Profile and Antioxidants Vitamins (A and C)" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45021.pdf Paper URL: https://www.ijtsrd.com/biological-science/biochemistry/45021/comparative-studies-of-diabetes-in-adult-nigerians-lipid-profile-and-antioxidants-vitamins-a-and-c/egejuru-leonard-o
To Assess the Severity and Mortality among Covid 19 Patients after Having Vac...YogeshIJTSRD
The severity and mortality of COVID 19 cases has been associated with the Three category such as vaccination status, severity of disease and outcome. Objective presently study was aimed to assess the severity and mortality among covid 19 patients. Methods Using simple lottery random method 100 samples were selected. From these 100 patients, 50 patients were randomly assigned to case group and 50 patients in control group after informed consents of relative obtained. Patients in the case group who being died after got COVID 19 whereas 50 patients in the control group participated who were survive after got infected from COVID 19 patients. Result It has three categories such as a Vaccination status For the vaccination status we have seen 59 patients were not vaccinated and 41 patients was vaccinated out of 100. b Incidence There were 41 patients were vaccinated whereas 59 patients were not vaccinated. c Severity In the case of mortality we selected 50 patients who were died from the Corona and I got to know that out of 50 patients there were 12 24 patients were vaccinated whereas 38 76 patients were non vaccinated. Although for the 50 control survival group total 29 58 patients were vaccinated and 21 42 patients was not vaccinated all graph start. Conclusion we have find out that those people who got vaccinated were less infected and mortality rate very low. Prof. (Dr) Binod Kumar Singh | Dr. Saroj Kumar | Ms. Anuradha Sharma "To Assess the Severity and Mortality among Covid-19 Patients after Having Vaccinated: A Retrospective Study" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45065.pdf Paper URL: https://www.ijtsrd.com/other-scientific-research-area/other/45065/to-assess-the-severity-and-mortality-among-covid19-patients-after-having-vaccinated-a-retrospective-study/prof-dr-binod-kumar-singh
Novel Drug Delivery System An OverviewYogeshIJTSRD
In present scenario evolution of an existing drug molecule from a old form to a novel delivery system can significantly improve its performance in terms of patient compliance, safety and efficacy. In the form of a control drug delivery system an existing drug molecule can get a new life. An appropriately designed Novel Drug Delivery System can be a major advance for solving the problems related towards the release of the drug at specific site with specific rate. The porpuse for delivering drugs to patients efficiently and with fewer side effects has prompted pharmaceutical companies to engage in the development of new drug delivery system. This article covers the basic information regarding Novel Drug Delivery Systems and also advantages, factor etc. Chiranjit Barman | Dr. Gaurav Kumar Sharma | Dr. Kausal Kishore Chandrul "Novel Drug Delivery System: An Overview" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45068.pdf Paper URL: https://www.ijtsrd.com/pharmacy/novel-drug-delivery-sys/45068/novel-drug-delivery-system-an-overview/chiranjit-barman
With the growth of technology their grows threat to our data which is just secured by passwords so to make it more secure biometrics came into existence. As biometric systems are adopted and accepted for security purpose for various information and security systems. Hence it is immune to attacks. This paper deals with the security of biometric details of individuals. In this paper we will be discussing about biometrics and its types and the threats and security issues which is not talked about usually. The different technologies evolved and had contributed to biometrics in long run and their effects. Sushmita Raulo | Saurabh Gawade "Security Issues Related to Biometrics" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd44951.pdf Paper URL: https://www.ijtsrd.com/computer-science/computer-security/44951/security-issues-related-to-biometrics/sushmita-raulo
Comparative Analysis of Different Numerical Methods for the Solution of Initi...YogeshIJTSRD
A mathematical equation which involves a function and its derivatives is called a differential equation. We consider a real life situation, from this form a mathematical model, solve that model using some mathematical concepts and take interpretation of solution. It is a well known and popular concept in mathematics because of its massive application in real world problems. Differential equations are one of the most important mathematical tools used in modeling problems in Physics, Biology, Economics, Chemistry, Engineering and medical Sciences. Differential equation can describe many situations viz exponential growth and de cay, the population growth of species, the change in investment return over time. We can solve differential equations using classical as well as numerical methods, In this paper we compare numerical methods of solving initial valued first order ordinary differential equations namely Euler method, Improved Euler method, Runge Kutta method and their accuracy level. We use here Scilab Software to obtain direct solution for these methods. Vibahvari Tukaram Dhokrat "Comparative Analysis of Different Numerical Methods for the Solution of Initial Value Problems in First Order Ordinary Differential Equations" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45066.pdf Paper URL: https://www.ijtsrd.com/mathemetics/applied-mathematics/45066/comparative-analysis-of-different-numerical-methods-for-the-solution-of-initial-value-problems-in-first-order-ordinary-differential-equations/vibahvari-tukaram-dhokrat
Evaluation of Different Paving Mixes Using Optimum Stabilizing ContentYogeshIJTSRD
Bituminous mixes are most commonly used all over the world in flexible pavement construction. It consists of asphalt or bitumen used as a binder and mineral aggregate which are mixed together, laid down in layers and then compacted. Under normal circumstances, conventional bituminous pavements if designed and executed properly perform quite satisfactorily but the performance of bituminous mixes is very poor under various situations. Today’s asphaltic concrete pavements are expected to perform better as they are experiencing increased volume of traffic, increased loads and increased variations in daily or seasonal temperature over what has been experienced in the past. In addition, the performance of bituminous pavements is found to be very poor in moisture induced situations. Considering this a lot of work has been done on use of additives in bituminous mixtures and as well as on modification of bitumen. Research has indicated that the addition of polymers to asphalt binders helps to increase the interfacial cohesiveness of the bond between the aggregate and the binder which can enhance many properties of the asphalt pavements to help meet these increased demands. However, the additive that is to be used for modification of mix or binder should satisfy both the strength requirements as well as economical aspects. Naveen Kumar | Ms. Shivani "Evaluation of Different Paving Mixes Using Optimum Stabilizing Content" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-5 | Issue-5 , August 2021, URL: https://www.ijtsrd.com/papers/ijtsrd45089.pdf Paper URL: https://www.ijtsrd.com/engineering/civil-engineering/45089/evaluation-of-different-paving-mixes-using-optimum-stabilizing-content/naveen-kumar
Operation “Blue Star” is the only event in the history of Independent India where the state went into war with its own people. Even after about 40 years it is not clear if it was culmination of states anger over people of the region, a political game of power or start of dictatorial chapter in the democratic setup.
The people of Punjab felt alienated from main stream due to denial of their just demands during a long democratic struggle since independence. As it happen all over the word, it led to militant struggle with great loss of lives of military, police and civilian personnel. Killing of Indira Gandhi and massacre of innocent Sikhs in Delhi and other India cities was also associated with this movement.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Palestine last event orientationfvgnh .pptxRaedMohamed3
An EFL lesson about the current events in Palestine. It is intended to be for intermediate students who wish to increase their listening skills through a short lesson in power point.
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
June 3, 2024 Anti-Semitism Letter Sent to MIT President Kornbluth and MIT Cor...Levi Shapiro
Letter from the Congress of the United States regarding Anti-Semitism sent June 3rd to MIT President Sally Kornbluth, MIT Corp Chair, Mark Gorenberg
Dear Dr. Kornbluth and Mr. Gorenberg,
The US House of Representatives is deeply concerned by ongoing and pervasive acts of antisemitic
harassment and intimidation at the Massachusetts Institute of Technology (MIT). Failing to act decisively to ensure a safe learning environment for all students would be a grave dereliction of your responsibilities as President of MIT and Chair of the MIT Corporation.
This Congress will not stand idly by and allow an environment hostile to Jewish students to persist. The House believes that your institution is in violation of Title VI of the Civil Rights Act, and the inability or
unwillingness to rectify this violation through action requires accountability.
Postsecondary education is a unique opportunity for students to learn and have their ideas and beliefs challenged. However, universities receiving hundreds of millions of federal funds annually have denied
students that opportunity and have been hijacked to become venues for the promotion of terrorism, antisemitic harassment and intimidation, unlawful encampments, and in some cases, assaults and riots.
The House of Representatives will not countenance the use of federal funds to indoctrinate students into hateful, antisemitic, anti-American supporters of terrorism. Investigations into campus antisemitism by the Committee on Education and the Workforce and the Committee on Ways and Means have been expanded into a Congress-wide probe across all relevant jurisdictions to address this national crisis. The undersigned Committees will conduct oversight into the use of federal funds at MIT and its learning environment under authorities granted to each Committee.
• The Committee on Education and the Workforce has been investigating your institution since December 7, 2023. The Committee has broad jurisdiction over postsecondary education, including its compliance with Title VI of the Civil Rights Act, campus safety concerns over disruptions to the learning environment, and the awarding of federal student aid under the Higher Education Act.
• The Committee on Oversight and Accountability is investigating the sources of funding and other support flowing to groups espousing pro-Hamas propaganda and engaged in antisemitic harassment and intimidation of students. The Committee on Oversight and Accountability is the principal oversight committee of the US House of Representatives and has broad authority to investigate “any matter” at “any time” under House Rule X.
• The Committee on Ways and Means has been investigating several universities since November 15, 2023, when the Committee held a hearing entitled From Ivory Towers to Dark Corners: Investigating the Nexus Between Antisemitism, Tax-Exempt Universities, and Terror Financing. The Committee followed the hearing with letters to those institutions on January 10, 202
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
2. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD40058 | Volume – 5 | Issue – 3 | March-April 2021 Page 987
3. NEED FOR THE WORK
In the previous existing model,
There is high cost of implementation and maintenance.
No real time application
No storage for sensor data
Lacks accuracy and small coverage
By considering all these limitations of previous existing model, our water quality monitoring system uses cloud storage
technique for storing the data, so that it prevents loss of data and uses real time web application which can be accessed by the
authorized users by login into their accounts which can be seen through smart phones from anywhere.
4. PROPOSED METHODOLOGY
In this system, we are using arduino as the microcontroller. The whole system is designed in embedded-C and simulating the
written code usingArduino IDE. For data collection on PH,waterlevel,temperatureandleakageofthesurroundingatmosphere,
the water quality monitoring system employs sensors. These data’s can be accessed by authorized users by using a user ID and
password on the web server by logging into their accounts. The gathered information is stored andanalyzedandtransmittedin
real-time. A rectifier, relay and a transformer are connected with the microcontroller.
The ESP8266 is a low cost wi-fi module consists of a full TCP/IP stack wi-fi chip and a microcontroller chip arduino, which
facilitates the data storage in IOT cloud. The wi-fi module uses transmitter and receiver serial pins for sending and receiving
data, for changing wireless module settings and for changing the serial query commands. The data from the sensors will be
displayed on the LCD display. The code boots from external flash directly during the processing of the program, thereby
increasing the system performance and storage requirements due to their optimized cache capacity. Finally, we can access the
data on the web application using personal android phones.
Fig 1 Block diagram of proposed system
3. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD40058 | Volume – 5 | Issue – 3 | March-April 2021 Page 988
5. CIRCUIT DESIGN
Fig 2 Circuit diagram of proposed system
6. SYSTEM DESIGN
A. ARDUINO (MICRO-CONTROLLER)
Arduino Uno is known as Atmega328 whichisanAVR micro-
controller. This has 2KB SRAM, flash memory of 32KB and
1KB of EEPROM. The arduino board has both digital and
analog pins. It has 14 digital and 6 analog pins. For
patterning these pins ON-chipADCisused.16Mhzfrequency
crystal oscillator is used on the board.
Figure 3 Arduino board
There are many I/O digital and analog pins operating at 5V.
These pins have ranging between 20mA to 40mA. Internal
pull-up resistors are used, which limits the modern day
exceeding from the given running conditions. However, too
lots enlarge makes these resisters vain and will damagesthe
device. Arduino Uno has built-in LED which is related
through pin 13, which provide high price to the pin will
make it ON and low will make it OFF. Vin, it is the entering
voltage supplied to the Arduino Board. It is unique than 5V
provided through a USB port. If a voltage is supplied via
electricity jack, it can be accessed through this pin. 5V pin is
used to furnish output regulated voltage. The board is
powered up the usage of three approaches i.e., USB, Vin pin
or DC energy jack. USB helps voltage round 5V and Vin and
Power jack guide a voltage stage between 7V to 20V. It is
operated at 5V. It is vital to notice that, if a voltage is
furnished through 5V or 3.3V pins, they end result in by
passing the voltage law that can injury the board if voltage
surpasses from its limit. GND, these are floorpins.Morethan
one floor pins are supplied on the board which can be used
as per requirement. Reset, this pin is integratedonthe board
which resets the application walkingontheboard.Insteadof
bodily reset on the board, IDE comes with a characteristic of
resetting the board through programming. IOREF, thispinis
very beneficial for supplying voltage reference to the board.
A protect is used to examine the voltage throughout this pin
which then pick the applicable strength source. PWM is
furnished through 3,5,6,9,10, 11pins. These pins are
configured to provided 8-bit output PWM. Four pins 10(SS),
11(MOSI), 12(MISO), 13(SCK) grant SPI verbal exchange
with the assist of SPI library. AREF, it is referred toasAnalog
Reference. This pin is used for imparting a reference voltage
to the analog inputs. TWI, it is known as Two-wire Interface.
TWI verbal exchange is accessed through Wire Library. A4
and A5 pins are used for this purpose. Serial conversation is
carried out between two pins known as Pin zero (Rx) and
Pin 1 (Tx). Rx pin is used to acquire information whilst Tx
pin is used to transmit data. Pin two and three are used for
imparting exterior interrupts. An interrupt is known as by
means of offering minimum or altering value.
B. PH SENSOR
PH is an electronic device which is used for measuring the
pH level in water. It consists of threetypesofprobes(i)Glass
electrode (ii) Reference electrode (iii) combination of gel
electrode. pH is defined as the negative logarithm of
hydrogen ion concentration in water.
pH=-log[H+]
A pH meter consists of special probes which are connected
to an electronic meter that would display the reading. If the
pH level is less than 7 then it is acidic in nature, if the pH
level is greater than 7 then it is alkaline in nature, and
generally the range of pH is 0-14pH. Operating range: 0-14.
Operating temperature: 0-45. Operating voltage: -5 to 5 v.
Output voltage: analog.
Fig 4 PH sensor
4. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD40058 | Volume – 5 | Issue – 3 | March-April 2021 Page 989
C. TEMPERATURE SENSOR
Temperature sensor is an integrated circuit sensor. The
output voltage is linearly proportional to the centigrade
temperature. The LM35 sensor is used in this project
because the user cannot convert Kelvin to centigrade
temperature. It is not suitable for remote applications and
directly measures in Celsius. The applications of the
temperature sensor are in microwave, fridges, household
devices and air conditioners. It measures not only the heat
but also measures cold temperature. They are two types of
sensors; they are non-contact temperature sensor and
contact temperature sensor. Contact temperature sensor is
again divided into three types, they are electro mechanical,
resistive resistance temperature detectors, and
semiconductor based LM35, DS1820 etc.
Fig 5 Temperature sensor
D. WATER LEAKAGE SENSOR
Water leakage sensor is designed for detectingwaterlevel in
reservoir and overhead tanks. This is widely used in sensing
the water leakage, water level and the rainfall. It consists of
mainly three parts: 1MΩ resistor, an electronic brick
connector and several lines of bare conducting wires. It
works by having a series of exposed traces which are
connected to ground. This is also interlaced between
grounded traces and the sunstrokes. A weak pull up resistor
of 1MΩ is present. 1MΩ resistor pulls up the sensor value
until a drop of water shorts the sensor trace to the grounded
trace. This can measure the water droplet/water size by
using a series of exposed parallel wires. The characteristics
are it has low power consumption and high sensitivity.
Fig 6 Water leakage sensor
E. Wi-Fi MODULE
The WI-FI module used in this project is ESP8266. It follows
TCP/IP stack and is a microchip which is less in cost. This
microchip allows microcontroller to connect to a WI-FI
network, by using Hayes style command connections are
done or made throughTCP/IPconnection.ESP8266has1MB
of built in flash, single chip devices able to connect WI-FI.
Espressif systems are the manufacturers of this module, it is
a 32-bit microcontroller. There are 16 GPIO pins in this
module. This module follows RISC processor. It has 10-bit
DAC. Later Espressif systems released a software
development kit (SDK) which is used to programme on the
chip, so that another microcontrollerisnotused.Someofthe
SDK’s are Node MCU, Arduino, Micro Python, Zerynth and
Mongoose OS. SPI, I2C, I2S, UART are used for
communicating between two sensors or modules.
Fig 7 Wi-Fi module
F. LCD DISPLAY
Liquid Crystal Display (LCD) screen is an electronic display
module. An LCD has a wide range of applications in
electronics. The most basic and commonly used LCD in
circuits is the16x2 display. LCDs are commonly preferred in
display because they are cheap, easy to programme and can
display a wide range of characters and animations. A 16x2
LCD have two display lines each capable of displaying
16characters. This LCD has Command and Data registers.
The command registers do command instructions given to
the LCD while the Data register stores the data to bed is
played by the LCD.
Fig 8 LCD display
7. WORKING OF THE SYSTEM
The system is based on IOT environment.Theset-upismade
as per the circuit diagram. The power supply is given from
the switch board and connected to the transformer which is
a step-down transformer. The step-down transformer is
used to convert 220volt power supply to 12-15volt supply.
This is then connected to a bridge rectifier that is a full wave
rectifier. This rectifier is used to convert AC current supply
to DC supply. This is connectedtothemicro-controllerwhich
is the arduino board.
To know the water quality parameters such as PH,
temperature, water level and leakage of the surrounding
atmosphere we use sensors namely PH sensor, temperature
sensor, water level and water leakage sensor. The PHsensor
consists of measuring and reference electrode. These two
electrodes when lifted in water shows some differences in
their value. So, we will take some of the readings and took
average for them. This will be done in the coding part. We
can also measure moist, light and PH. In the outputsetup we
have a black box connected to the PH which is the internal
source to convert Ph meter to pulse wave. If the value is less
than 7, it will be acidic in nature and more than 7 will be
alkaline in nature.
The temperature sensor used is LM35. This is used to show
the value in degree Celsius. Othertemperaturesensorwill be
measured in Fahrenheit and we have to convert it to degree
Celsius. This will be a long process. So, we use LM35. It can
measure approximately from -55 to 150 degree Celsius. The
water leakage sensor detects when the voltage is low. That
means when the voltage is low, there is some water leakage.
The water float sensor is set to know the water level.Wewill
set some saturated level, if the flow of water is above the
saturated level, then there is high water flow. If the flow of
water is below the saturated level, then there is low water
5. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD40058 | Volume – 5 | Issue – 3 | March-April 2021 Page 990
flow. From high current flow to low current flow, this will be
controlled by using relay. If there is an open circuit, there
will be no current flow. If any one of the sensor values is not
detected or not in range, we will have a buzzer sound.
The values from sensors are displayed on the LCD display.
These values will be analysed, transmitted and stored in the
cloud using the Wi-Fi module. The real time parameter
values can be seen by the authorized users byloginintotheir
accounts using the user id and password through the smart
phone web application.
8. RESULT AND ANALYSIS
A. HARDWARE OUTPUT
Fig 9 Hardware output
The hardware set up is made as per the above figure. When
the current supply is given to the set-up, the step-down
transformer reduces to 12-15V and the bridge rectifier will
convert Ac to Dc supply. This is connected to the arduino
micro-controller. The values from the sensors namely Ph,
temperature, water level and water leakage sensors will be
displayed on the LCD display which is connected to the
micro-controller. The values are analysed, transmitted and
stored in cloud using wi-fi module for real time applications.
B. REAL TIME SENSOR VALUES
Fig 10 Real time sensor values
The real time sensor values from the web application is
listed in the above figure. The values of four sensors which
are Ph, temperature, water leakage and water level are
calculated and displayed on the web screen. From these
values, we can able to qualify and monitor the quality of the
taken water. It displays with date and time so that we can
able to know the real time values of each sensors. We
already set some saturated value, if the value is above the
saturation it displays high and if it is below the saturation it
displays as low for water level values. The Ph defines the
acidic or alkaline characteristics of the water. These values
from the above figure has the significance in deciding the
quality of water. This can be accessed from anywhere at any
time using the web application. From this, we can conclude
the safety in drinking water.
9. ADVANTAGES
A. Real time application is made by using cloud storage
technique, so that authorized users can use it from
anywhere.
B. More accuracy in data values.
C. Cost implemented is less
D. Interfacing of all the sensors in one system.
10. FUTURE SCOPE:
In the upcoming generation, this proposed system by
embedding artificial intelligence will be useful inmakingthe
system autonomous with defining some sort of rules and
regulations with high standards. This will bring use of
automatic and smart distribution of waterwithouttheuseof
human invention. The problem arising can be easily sorted
out with automatic notification to the remote handling
device to the accessed user. It can be used in industrial
purposes. In industry, we can use ultrasonic sensorsin place
of metallic wires which gives more accurate information. It
may also be used in the flood prone regions and in dams for
the people to be safe by knowing the water level quality and
it can be informed by a notification. Therefore, if the level of
water is above the saturated level, it will send notification
upon the app so that we can alert the people. From this,
many communication technologies can be introducedbased
on our need of requirements.
11. CONCLUSION
In this project, it explains about detail of the project and the
use of the sensors and cloudstoragetechniqueandtoolsused
for the smartcitieswaterqualitymonitoringsystemusingthe
IOT platform. We used PH, temperature, water level and
water leakage sensor for the measuring and knowing the
quality of the present water. The datavaluesofthesensorare
received and is displayed on the LCD screen display. The
future techniquesand ideas can bedevelopedfromthisbasis.
It is done in communication technologies and can be
introduced as a software interface for further uses. So that it
helps people to carry their own work at the same time and
can view the real time data values fromany-whereandatany
time using the smart mobile phones. It cost less and is small
in size. It can be used at anywhere even in industrial level. It
checks water level and quality of all different tanks with
different liquids. We can alsouse this in higherlevel projects.
The main advantage is that it provides adequate supply of
water with good quality for safe drinking. By implementing
this method of idea, there will be safe drinking of water in
future and the quality of the water is monitored and checked
where ever we are.
12. REFERENCES
[1] An Internet of Things Based Model for Smart Water
Distribution with Quality Monitoring, Joy Shah, P.G.
Student, Department of Information Technology,
Dharmsinh Desai University, Nadiad, Gujarat, India,
International Journal of Innovative Research in
Science, Engineering and Technology(An ISO 3297:
6. International Journal of Trend in Scientific Research and Development (IJTSRD) @ www.ijtsrd.com eISSN: 2456-6470
@ IJTSRD | Unique Paper ID – IJTSRD40058 | Volume – 5 | Issue – 3 | March-April 2021 Page 991
2007 Certified Organization) Website:
www.ijirset.com, Vol. 6, Issue 3, March 2017.
[2] Smart Water Management UsingIOT,SayaliWadekar,
Vinayak Vakare, Ramratan Prajapati, Shivam Yadav,
Vijaypal Yadav,978-1-5090-0893-3/16/$31.00,2016
IEEE.
[3] 4th International Conference on Advances in
Electrical, Electronics, Information, Communication
and Bio-Informatics,Dr.Nageswara RaoMoparthi,Ch.
Mukesh, Dr. P. Vidya Sagar, (AEEICB-18)978-1-5386-
4606-9, 2018 IEEE Water Quality Monitoring System
Using IOT.
[4] IoT based Water Parameter Monitoring System,
Krishna S, Sarath TV, Proceedings of the Fifth
International Conference on Communication and
Electronics Systems (ICCES 2020) IEEE Conference
Record # 48766; IEEE Xplore ISBN: 978-1-7281-
5371-1.