This document describes the design and development of a die for manufacturing a rubber gear shift boot. It discusses the expectations for the part, which include being durable, lightweight, and able to withstand regular applied force. Rubber nitrile is selected as the raw material due to its strength and flexibility. Dimensional calculations are shown to determine the required clearance between the die halves to account for the material's shrinkage. Compression molding is selected as the manufacturing process due to its ability to quickly produce complex parts like the gear shift boot. The advantages of the process include short lead times and ability to add features like holes. The document concludes by stating that manufacturing and testing will be the next steps after designing and building the die.
“CONCEPT VALIDATION AND DESIGN SYNTHESIS OF CAR DASHBOARD AS PER PLASTIC TRIM...Jayesh Sarode
The evolution of dashboard has led to increased
vehicle occupant comfort and convenience as new systems
become available. The project work aims to develop the work
to apply theoretical and practical tools/techniques to solve
real life problems related to industry and current research in
this project automobile (Car) dashboard upper cover is
selected for a design. For doing so conceptual design tool is
used. I am created a five different concepts using different
benchmarking & brainstorming. Select a best option using
different tools in six sigma like trade off analysis. Threedimensional
CAD software (such as CATIA) is used to develop a
CAD model same as concept. The aim is to achieve the essential
function at the lowest overall cost while maintaining
customers’ optimum value assurance. In this project I try to
develop a such dashboard design which follow a design
guidelines, And analyze and discuss the results to Obtain valid
conclusions which follows a design Standards.
A Design and Analysis of Two Plate Injection Mould Tool For Wi-Fi RouterTherm...EditorJST
This A Wi-Fi router is a device that performs the function of a wireless access point, it is used to provide
access to the internet or a private computer. It is the hardware device that provide basic infrastructure for a home
or small office network.Proposed to make a single impression semi-automatic family mould to design top and
bottom cover for Wi-Fi router to make it more aesthetic, to reduce material cost, better heat dissipation, and to
reduce the tooling cost, to make the product more competitive in the market.It is proposed select the suitable plastic
material, to modify the existing plastic product design and to develop a suitable two plate family mould of one
impression each using SIEMENS NX software. It is also proposed to make detailing of mould parts and its assembly
for manufacturing using SIEMENS NX software. The analysis was done in AUTODESK MOLDFLOW. The mould
cost, raw material cost and processing cost per component are to be estimated to find the cost per component and to
compare it with the existing component part.
A study of professional advantages to manufacturing organizations by the way ...IJERA Editor
This paper presents the study and analysis of long term advantages gained by electromechanical product
manufacturing Industries when the A class components like brass electrical contacts are manufactured by
newly devised advance manufacturing technique of hot brass extrusion .After completion of the research and
practical application this new advance manufacturing technique this has replaced previous traditional
manufacturing technique of green sand molding and casting used for commercial production of brass
contacts. The prime impact of research covers a newly devised innovative product life cycle which increases
product life.
“CONCEPT VALIDATION AND DESIGN SYNTHESIS OF CAR DASHBOARD AS PER PLASTIC TRIM...Jayesh Sarode
The evolution of dashboard has led to increased
vehicle occupant comfort and convenience as new systems
become available. The project work aims to develop the work
to apply theoretical and practical tools/techniques to solve
real life problems related to industry and current research in
this project automobile (Car) dashboard upper cover is
selected for a design. For doing so conceptual design tool is
used. I am created a five different concepts using different
benchmarking & brainstorming. Select a best option using
different tools in six sigma like trade off analysis. Threedimensional
CAD software (such as CATIA) is used to develop a
CAD model same as concept. The aim is to achieve the essential
function at the lowest overall cost while maintaining
customers’ optimum value assurance. In this project I try to
develop a such dashboard design which follow a design
guidelines, And analyze and discuss the results to Obtain valid
conclusions which follows a design Standards.
A Design and Analysis of Two Plate Injection Mould Tool For Wi-Fi RouterTherm...EditorJST
This A Wi-Fi router is a device that performs the function of a wireless access point, it is used to provide
access to the internet or a private computer. It is the hardware device that provide basic infrastructure for a home
or small office network.Proposed to make a single impression semi-automatic family mould to design top and
bottom cover for Wi-Fi router to make it more aesthetic, to reduce material cost, better heat dissipation, and to
reduce the tooling cost, to make the product more competitive in the market.It is proposed select the suitable plastic
material, to modify the existing plastic product design and to develop a suitable two plate family mould of one
impression each using SIEMENS NX software. It is also proposed to make detailing of mould parts and its assembly
for manufacturing using SIEMENS NX software. The analysis was done in AUTODESK MOLDFLOW. The mould
cost, raw material cost and processing cost per component are to be estimated to find the cost per component and to
compare it with the existing component part.
A study of professional advantages to manufacturing organizations by the way ...IJERA Editor
This paper presents the study and analysis of long term advantages gained by electromechanical product
manufacturing Industries when the A class components like brass electrical contacts are manufactured by
newly devised advance manufacturing technique of hot brass extrusion .After completion of the research and
practical application this new advance manufacturing technique this has replaced previous traditional
manufacturing technique of green sand molding and casting used for commercial production of brass
contacts. The prime impact of research covers a newly devised innovative product life cycle which increases
product life.
Design for Manufacturing Guidelines, issue IV, Milling Design GuidelinesDFMPro
Milling is typically used to produce parts that are not axially symmetric and DFM guidelines recommend avoiding sharp internal corners inside pockets when it is to be manufactured using milling process.
Read the guidebook for important design rules such as Deep Radiused Corners, Sharp Internal Corners, Tool Accessibility, Narrow Regions in Pockets, Side and Bottom Radius, Tool Clearance Check and Angular Milling Faces.
To subscribe to Guidebook, please visit http://dfmpro.geometricglobal.com/dfm-guidebook/
Ango mould & plastic co., ltd. (company profile )Jenny Hu
Ango Mold is a professional plastic injection mould & molding manufacturer over 10 years. Precise mold, Medium and Large size mold, Double-injection mold, Blow mold, Insert mold, Stack mold, Multi-cavity mold and Die-casting mold are can be made in Ango Mold. We meet 98% of satisfy for the quality, and 97% of meeting lead time for all of our present customers. Looking forward to work with you.
In this presentation, we will talk about the importance of technology and factory automation, along with automated manufacturing systems, types of automation, automation principles and strategies.
To know more about Welingkar School’s Distance Learning Program and courses offered, visit: http://www.welingkaronline.org/distance-learning/online-mba.html
Bluestar Mould Group (BSM Group) has more than 20 year experience in precision mold making and plastic injection molding, especially in Automotive industry. We have become a reliable strategic partner of many companies over the world: FORD, BMW, SKODA, TRW, PHILIPS, TRUCK-LITE...
Homepage: http://bluestar-mould.com | Contact: Dickens@bluestar-mould.com
DESIGN OF MOULD TOOL & COOLING CHANNEL OPTIMIZATION OF REMOTE CONTROL TOP PANELIjripublishers Ijri
A plastic material is any of a wide range of synthetic or semi-synthetic organic solids that are moldable. Plastics are
typically organic polymers of high molecular mass, but they often contain other substances. They are usually synthetic,
most commonly derived from petrochemicals, but many are partially natural.
Molding is the process of manufacturing by shaping liquid or pliable raw material using a rigid frame called a mold or
matrix. This itself may have been made using a pattern or model of the final object.
Cooling channels are used in mold tool to reduce the temperature of the object to help molten material to solidify quickly
before the ejection. It is quite useful to increase the production rate.
The aim of this project work is to design mold structure and optimize cooling channel system to reduce effect of warpage
of remote control top panel.
OPTIMIZED DIE STRUCTURE DESIGN OF PLASTIC INJECTION MOULD USING FEM TECHNIQUEIjripublishers Ijri
The Aim of this thesis work is to reduce weight and cost of the injection mold by removing unwanted materials and using
low cost materials at non-stress region areas.
A general large size model will be prepared to design the mold structure using theoretical method.
Complete level of mold parts and assembly will be prepared to conduct analysis.
Structural analysis will be conducted on mould to find stress locations and non-effective locations.
Modifications will be done on mold according to obtained results.
S.Gautham- Design Executive- Curriculum VitaeGautham S
Presently working as a "Design Engineer in Research and Development" and BE-Mechanical Engineering with sound knowledge 3D- Modelling in Croe2.0 & 2D modelling in AutoCAD, Production Planning & Control, Documentation & Design & Production Technology
This presentation gives information about Asahi India Glass Limited which is coveted name in automotive glass industries. In this we discuss all process and bawal plant layout.
Design for Manufacturing Guidelines, issue IV, Milling Design GuidelinesDFMPro
Milling is typically used to produce parts that are not axially symmetric and DFM guidelines recommend avoiding sharp internal corners inside pockets when it is to be manufactured using milling process.
Read the guidebook for important design rules such as Deep Radiused Corners, Sharp Internal Corners, Tool Accessibility, Narrow Regions in Pockets, Side and Bottom Radius, Tool Clearance Check and Angular Milling Faces.
To subscribe to Guidebook, please visit http://dfmpro.geometricglobal.com/dfm-guidebook/
Ango mould & plastic co., ltd. (company profile )Jenny Hu
Ango Mold is a professional plastic injection mould & molding manufacturer over 10 years. Precise mold, Medium and Large size mold, Double-injection mold, Blow mold, Insert mold, Stack mold, Multi-cavity mold and Die-casting mold are can be made in Ango Mold. We meet 98% of satisfy for the quality, and 97% of meeting lead time for all of our present customers. Looking forward to work with you.
In this presentation, we will talk about the importance of technology and factory automation, along with automated manufacturing systems, types of automation, automation principles and strategies.
To know more about Welingkar School’s Distance Learning Program and courses offered, visit: http://www.welingkaronline.org/distance-learning/online-mba.html
Bluestar Mould Group (BSM Group) has more than 20 year experience in precision mold making and plastic injection molding, especially in Automotive industry. We have become a reliable strategic partner of many companies over the world: FORD, BMW, SKODA, TRW, PHILIPS, TRUCK-LITE...
Homepage: http://bluestar-mould.com | Contact: Dickens@bluestar-mould.com
DESIGN OF MOULD TOOL & COOLING CHANNEL OPTIMIZATION OF REMOTE CONTROL TOP PANELIjripublishers Ijri
A plastic material is any of a wide range of synthetic or semi-synthetic organic solids that are moldable. Plastics are
typically organic polymers of high molecular mass, but they often contain other substances. They are usually synthetic,
most commonly derived from petrochemicals, but many are partially natural.
Molding is the process of manufacturing by shaping liquid or pliable raw material using a rigid frame called a mold or
matrix. This itself may have been made using a pattern or model of the final object.
Cooling channels are used in mold tool to reduce the temperature of the object to help molten material to solidify quickly
before the ejection. It is quite useful to increase the production rate.
The aim of this project work is to design mold structure and optimize cooling channel system to reduce effect of warpage
of remote control top panel.
OPTIMIZED DIE STRUCTURE DESIGN OF PLASTIC INJECTION MOULD USING FEM TECHNIQUEIjripublishers Ijri
The Aim of this thesis work is to reduce weight and cost of the injection mold by removing unwanted materials and using
low cost materials at non-stress region areas.
A general large size model will be prepared to design the mold structure using theoretical method.
Complete level of mold parts and assembly will be prepared to conduct analysis.
Structural analysis will be conducted on mould to find stress locations and non-effective locations.
Modifications will be done on mold according to obtained results.
S.Gautham- Design Executive- Curriculum VitaeGautham S
Presently working as a "Design Engineer in Research and Development" and BE-Mechanical Engineering with sound knowledge 3D- Modelling in Croe2.0 & 2D modelling in AutoCAD, Production Planning & Control, Documentation & Design & Production Technology
This presentation gives information about Asahi India Glass Limited which is coveted name in automotive glass industries. In this we discuss all process and bawal plant layout.
IJRET : International Journal of Research in Engineering and Technology is an international peer reviewed, online journal published by eSAT Publishing House for the enhancement of research in various disciplines of Engineering and Technology. The aim and scope of the journal is to provide an academic medium and an important reference for the advancement and dissemination of research results that support high-level learning, teaching and research in the fields of Engineering and Technology. We bring together Scientists, Academician, Field Engineers, Scholars and Students of related fields of Engineering and Technology.
Now a day’s Die design is the major part in product development. Die design will cause of
the increase in component cost, machining complexity. For avoiding these problems we are taking
virtual software support.
In this thesis paper I am working on injection moulding die design optimizing. To provide an
initial design of the mould assembly for customers prior to receiving the final product CAD data is a
preliminary work of any final plastic injection mould design. Traditionally and even up till now, this
initial design is always created using 2D CAD packages. The information used for the initial design
is based on the technical discussion checklist, in which most mould makers have their own standards.
This technical discussion checklist is also being used as a quotation. This paper presents a
methodology of rapid realization of the initial design in 3Dsolid based on the technical discussion
checklist, which takes the role of the overall standard template. Information are extracted from
databases and coupled with the basic information from customer, these information are input into the
technical discussion checklist. Rules and heuristics are also being used in the initial mould design. A
case study is provided to illustrate the use of the standard template and to exhibit its real application
of rapid realization of the initial design for plastic injection moulds.
In this paper we are avoiding the all the problems involved in die design and how to make
standard template for the die design
Six Sigma DMADV Approach for Conceptual Design Synthesis of Car DashboardJayesh Sarode
The main goals of Six Sigma need to incorporate
these specific expected outcomes for the program, and
typically fall within the key areas like Quality, Variability,
Productivity. Without attacking quality issues in any process,
all other improvement efforts will certainly come up short. For
doing that Six Sigma implementation can differ widely
between organizations, depending on their individual goals
and operational strategies.
In this project I have successfully applied many design
processes related with six sigma like Identify Customer CTQs/
Customer Survey, develop a Fishbone Diagram, Input
Requirement Checklist, Quality Function Deployment, Design
Concepts (Competitive assessments (Benchmarking), Tradeoff
Analysis, Engineering Analysis - Develop System & Subsystem
Models, Error Proofing and Fixing, Validation, etc.
The aim is to achieve the essential function at the lowest
overall cost while maintaining customers’ optimum value
assurance. In this project I try to develop a such dashboard
design which follow a plastic design guideline, and analyze
and discuss the results to Obtain valid conclusions which
follows a design Standards. Plastic part dashboard is designed
by following Plastic trim design guidelines as well as DFM
(Design for manufacturing) and DFA (Design for Assembly)
guidelines. This project intends to explore the adoption of Six
sigma as a value creation tool. This project presents the basics
of Six sigma and its different phases that can be implemented
to a dashboard for its optimization.
Development of new products is extremely essential for the success and smooth running of every industry. Companies have to constantly inject innovations and design efforts to make the design processes easy and to attract consumers in a constantly in a evolving and highly competitive market with best quality . Keeping ahead of the competition by bringing new and exciting products to market fast, and at the necessary level of quality, presents a major engineering challenge. A new casting bracket in place of old stamping brackets in snowmobile chassis development process is described, which introduces advanced FEM and Optimization technology into the concept development phase. Detailed predictions of interacting parts in a mechanism assembly are made possible through use of value engineering based process and material selection and advanced simulation technology. Design optimization is then employed using the modeling as a virtual testing ground for design variants. The approach provides clear design direction and helps to improve performance and reduce the unnecessary welding efforts of bracket manufacturing. Design is an intelligent activity that begins with design requirements and ends with a product description. Using Altair Optistruct was able to significantly reduce design time by sub modeling with structural optimization. The resultant casting bracket design showed superior performance characteristics. And finely the manufacturer had to put less efforts in stamping and part welding , which reduced the manufacturing time and cost also.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Courier management system project report.pdfKamal Acharya
It is now-a-days very important for the people to send or receive articles like imported furniture, electronic items, gifts, business goods and the like. People depend vastly on different transport systems which mostly use the manual way of receiving and delivering the articles. There is no way to track the articles till they are received and there is no way to let the customer know what happened in transit, once he booked some articles. In such a situation, we need a system which completely computerizes the cargo activities including time to time tracking of the articles sent. This need is fulfilled by Courier Management System software which is online software for the cargo management people that enables them to receive the goods from a source and send them to a required destination and track their status from time to time.
Welcome to WIPAC Monthly the magazine brought to you by the LinkedIn Group Water Industry Process Automation & Control.
In this month's edition, along with this month's industry news to celebrate the 13 years since the group was created we have articles including
A case study of the used of Advanced Process Control at the Wastewater Treatment works at Lleida in Spain
A look back on an article on smart wastewater networks in order to see how the industry has measured up in the interim around the adoption of Digital Transformation in the Water Industry.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
CFD Simulation of By-pass Flow in a HRSG module by R&R Consult.pptxR&R Consult
CFD analysis is incredibly effective at solving mysteries and improving the performance of complex systems!
Here's a great example: At a large natural gas-fired power plant, where they use waste heat to generate steam and energy, they were puzzled that their boiler wasn't producing as much steam as expected.
R&R and Tetra Engineering Group Inc. were asked to solve the issue with reduced steam production.
An inspection had shown that a significant amount of hot flue gas was bypassing the boiler tubes, where the heat was supposed to be transferred.
R&R Consult conducted a CFD analysis, which revealed that 6.3% of the flue gas was bypassing the boiler tubes without transferring heat. The analysis also showed that the flue gas was instead being directed along the sides of the boiler and between the modules that were supposed to capture the heat. This was the cause of the reduced performance.
Based on our results, Tetra Engineering installed covering plates to reduce the bypass flow. This improved the boiler's performance and increased electricity production.
It is always satisfying when we can help solve complex challenges like this. Do your systems also need a check-up or optimization? Give us a call!
Work done in cooperation with James Malloy and David Moelling from Tetra Engineering.
More examples of our work https://www.r-r-consult.dk/en/cases-en/