Thermal Power Plant Simulator, Cold, warm and Hot rolling of Steam TurbineManohar Tatwawadi
The presentation describes the cold rolling, warm rolling and hot rolling and synchronising of steam turbine. The Temperature Matching Chart for Turbine metal and Steam is also discussed in the presentation
Boiler Water Circulation Pumps
1 SCOPE
2 CHOICE OF TYPE AND NUMBER OF PUMPS
2.1 Need for Continuous Flow
2.2 Pump Reliability
3 CHOICE OF DRIVER
4 DUTY CALCULATIONS
5 CHOICE OF SEAL
5.1 Mechanical Seals
5.2 Soft-packed Glands
5.3 Construction Features
5.4 Guarding
6 CONSTRUCTION FEATURES
6.1 Vertical Glandless Wet-stator Motor Pumps
7 LAYOUT
7.1 Non-return Valves
7.2 Reducers at Pump Connections
7.3 Glandless Pumps for System Pressures
Exceeding 60 bar abs
7.4 Access round Glandless Pumps
7.5 Cooling Water Supply
8 RECOMMENDED LINE DIAGRAMS
8.1 Horizontal Pumps in Category 1
8.2 Vertical Wet-stator Motor Pumps in Category
APPENDICES
A PROPERTIES OF WATER AT THE SATURATION LINE
B ANNEX TO API 610, 6TH EDITION 1981:
VERTICAL GLANDLESS WET-STATOR MOTOR PUMPS
C ANNEX TO API 610, 6TH EDITION 1981:
HORIZONTAL BACK PULL-OUT PUMPS FOR BOILER
WATER CIRCULATION DUTY
FIGURES
3.1 NPSH CORRECTION FOR WATER
3.2 VELOCITY OF SOUND IN WATER AT 50 BAR
(NO BUBBLES)
3.3 VELOCITY OF SOUND IN WATER AT 50 BAR
(WITH 3% VAPOR CONTENT)
8.1 RECOMMENDED LINE DIAGRAM HORIZONTAL PUMPS - CATEGORY 1
8.2 RECOMMENDED LINE DIAGRAM HORIZONTAL PUMPS - SOFT PACKED GLAND INSTALLATION
8.3 RECOMMENDED LINE DIAGRAM HORIZONTAL PUMPS - MECHANICAL SEAL INSTALLATION
8.4 RECOMMENDED LINE DIAGRAM VERTICAL WET STATOR PUMPS - CATEGORY 2
BIBLIOGRAPHY
Thermal Power Plant Simulator, Cold, warm and Hot rolling of Steam TurbineManohar Tatwawadi
The presentation describes the cold rolling, warm rolling and hot rolling and synchronising of steam turbine. The Temperature Matching Chart for Turbine metal and Steam is also discussed in the presentation
Boiler Water Circulation Pumps
1 SCOPE
2 CHOICE OF TYPE AND NUMBER OF PUMPS
2.1 Need for Continuous Flow
2.2 Pump Reliability
3 CHOICE OF DRIVER
4 DUTY CALCULATIONS
5 CHOICE OF SEAL
5.1 Mechanical Seals
5.2 Soft-packed Glands
5.3 Construction Features
5.4 Guarding
6 CONSTRUCTION FEATURES
6.1 Vertical Glandless Wet-stator Motor Pumps
7 LAYOUT
7.1 Non-return Valves
7.2 Reducers at Pump Connections
7.3 Glandless Pumps for System Pressures
Exceeding 60 bar abs
7.4 Access round Glandless Pumps
7.5 Cooling Water Supply
8 RECOMMENDED LINE DIAGRAMS
8.1 Horizontal Pumps in Category 1
8.2 Vertical Wet-stator Motor Pumps in Category
APPENDICES
A PROPERTIES OF WATER AT THE SATURATION LINE
B ANNEX TO API 610, 6TH EDITION 1981:
VERTICAL GLANDLESS WET-STATOR MOTOR PUMPS
C ANNEX TO API 610, 6TH EDITION 1981:
HORIZONTAL BACK PULL-OUT PUMPS FOR BOILER
WATER CIRCULATION DUTY
FIGURES
3.1 NPSH CORRECTION FOR WATER
3.2 VELOCITY OF SOUND IN WATER AT 50 BAR
(NO BUBBLES)
3.3 VELOCITY OF SOUND IN WATER AT 50 BAR
(WITH 3% VAPOR CONTENT)
8.1 RECOMMENDED LINE DIAGRAM HORIZONTAL PUMPS - CATEGORY 1
8.2 RECOMMENDED LINE DIAGRAM HORIZONTAL PUMPS - SOFT PACKED GLAND INSTALLATION
8.3 RECOMMENDED LINE DIAGRAM HORIZONTAL PUMPS - MECHANICAL SEAL INSTALLATION
8.4 RECOMMENDED LINE DIAGRAM VERTICAL WET STATOR PUMPS - CATEGORY 2
BIBLIOGRAPHY
ROLE OF CONTROL AND INSTRUMENTATION IN THERMAL POWER PLANTGaurav Rai
Role of control and instrumentation in thermal power plant.
Use of various instruments for the measurements of flow, pressure and temperature in industries.
Super Critical Technology-Fundamental Concepts about Super Critical Technolog...Raghab Gorain
Nicely describe everything about super critical technology in thermal power plant.This slide is very useful for the freshers.Anybody can get the basic fundamental idea about super critical technology from this slide. In India now we have to think some new technology for power sources as sub critical power plants are less efficient and emit more pollutant to the environment and the alternative is the 'Super Critical Power Plant'.
The writeup details the Heat Balance of BHEL 210 MW Turbine Cycle. The Input and Output steam condition of Turbines, Extractions, Deaerator, LP Heaters, Condensers etc have been computed as per the specifications of the turbine manufacturer
Water steam Circuit in Supercritical Boiler for 660MW Power PlantHareesh VS
An animated presentation over Complete water steam circulation in a super critical boiler with flow chart. The water-steam path through various Systems (High pressure & Low pressure systems) in boiler for a 660MW thermal power plat, and also indicates the temperature and pressure variations after flowing through individual systems. Watch Live Presentation on YouTube: http://youtu.be/snIVrTmI4bM
ROLE OF CONTROL AND INSTRUMENTATION IN THERMAL POWER PLANTGaurav Rai
Role of control and instrumentation in thermal power plant.
Use of various instruments for the measurements of flow, pressure and temperature in industries.
Super Critical Technology-Fundamental Concepts about Super Critical Technolog...Raghab Gorain
Nicely describe everything about super critical technology in thermal power plant.This slide is very useful for the freshers.Anybody can get the basic fundamental idea about super critical technology from this slide. In India now we have to think some new technology for power sources as sub critical power plants are less efficient and emit more pollutant to the environment and the alternative is the 'Super Critical Power Plant'.
The writeup details the Heat Balance of BHEL 210 MW Turbine Cycle. The Input and Output steam condition of Turbines, Extractions, Deaerator, LP Heaters, Condensers etc have been computed as per the specifications of the turbine manufacturer
Water steam Circuit in Supercritical Boiler for 660MW Power PlantHareesh VS
An animated presentation over Complete water steam circulation in a super critical boiler with flow chart. The water-steam path through various Systems (High pressure & Low pressure systems) in boiler for a 660MW thermal power plat, and also indicates the temperature and pressure variations after flowing through individual systems. Watch Live Presentation on YouTube: http://youtu.be/snIVrTmI4bM
Boiler Process Instrumentation and controlsADITYA AGARWAL
Report based on Boiler process control and instrumentation.This is a one stop destination for you to get all the information about ALSTOM-India and its boiler product line.Highly known for its cutting edge technologies .Alstom has been a leader in boiler business. It is also famous for its transport and Grid services and recent patch up with GE has made them even stronger.
So if you want full theory about the boilers process control and instrumentation ,you will get it here.
Contains all the process fundamentals, P&ID diagrams , KKS tagging etc
Museum Case Studies
http://en.wikipedia.org/wiki/Museum
A museum is an institution that cares for (conserves) a collection of artifacts and other objects of scientific, artistic, cultural, or historical importance and makes them available for public viewing through exhibits that may be permanent or temporary.[1] Most large museums are located in major cities throughout the world and more local ones exist in smaller cities, towns and even the countryside. Museums have varying aims, ranging from serving researchers and specialists to serving the general public. The continuing acceleration in the digitization of information, combined with the increasing capacity of digital information storage, is causing the traditional model of museums (i.e. as static "collections of collections" of three-dimensional specimens and artifacts) to expand to include virtual exhibits and high-resolution images of their collections for perusal, study, and exploration from any place with Internet.[citation needed] The city with the largest number of museums is Mexico City with over 128 museums. According to The World Museum Community, there are more than 55,000 museums in 202 countries.[2]
Maintenance of Instruments & Systems (free chapter download)ISA Interchange
Maintenance of Instruments & Systems is ISA's best-selling maintenance handbook that covers fundamental principles, vocabulary, symbolism, standards and safety. In addition, it spotlights today's fast-emerging trends and advances. You can purchase this book at the following link: https://www.isa.org/store/products/product-detail/?productId=116166
A case study on Bord Gais, UK's largets producer and supplier of natural gas. This was presented in the MBA Crash Course Seminar sponsored by PICPA Riyadh Chapter.
Importance of three elements boiler drum level control and its installation i...ijics
Conversion of water into steam is the primary function of a utility boiler. The steam pressure is used to turn
a steam turbine thus, generating electricity. Within the boiler drum there exists a steam/water interface.
Boiler steam drum water level is one of the important parameters of power plant that must be measured
and controlled. For safe and efficient boiler operation, a constant level of water in the boiler drum is
required to be maintained. Too low water level may cause damage boiler tube by overheating. On the other
hand too high drum water level leads to improper function of separators, difficulty in temperature
controlling and damage in superheater tubes. Turbine may also be damaged by moisture or water
treatment chemicals carryover. The amount of water entering the boiler drum must be balanced with the
amounts of steam leaving to accomplish the constant water level in the drum. Therefore it is extremely
important to have the knowledge of the operating principles, installation requirements, strength and
weaknesses of drum water level control system. Ignoring these considerations can result in misapplication,
frequent maintenance, unsafe operation and poor instrument as well as system performance. In this paper
design aspects and installation requirements of boiler drum level control are discussed for safe and
economic operation.
Catalog Frenic-HVAC (Fuji Electric): Biến tần Frenic-HVAC
Beeteco.com là trang mua sắm trực tuyến thiết bị điện - Tự động hóa uy tín tại Việt Nam.
Chuyên cung cấp các thiết bị: Đèn báo nút nhấn, Relay, Timer, Contactor, MCCB ELCB, Biến tần, Van, Thiết bị cảm biến, phụ kiện tủ điện, .... Từ các thương hiệu hàng đầu trên thế giới.
www.beeteco.com @ Công ty TNHH TM KT ASTER
Số 7 Đại Lộ Độc Lập, KCN Sóng Thần 1, P. Dĩ An, Tx. Dĩ An, Bình Dương
www.facebook.com/beeteco
Tel: 0650 3617 012
DĐ: 0904 676 925
Siemens Terminal Box Controller (APOGEE Automation System )CONTROLS & SYSTEMS
In This PPT we are discussed about complete details of that product (Use,Operation, Technical details, Dimensions, Wiring, and etc..)
Please Support us and Follow our other Sites
https://www.instagram.com/controlsandsystems.offical
https://twitter.com/ControlsSystems
https://automationtechplc2.blogspot.com
https://humidificationcontrol.blogspot.com
https://controlsandsystems.business.site
www.controls.systemsdm@gmail.com
If you enjoyed this article, share it with your friends and colleagues
SOR® is a manufacturer of high-quality pressure and tempreature switches for industrial service. They serve a global market of oil and gas, chemical, petrochemical, and power industries through a network of independent sales representatives. Their products are suitable for a broad range of safety systems, control processes, and related applications.
Công ty TNHH Hạo Phương là đối tác phân phối các thiết bị điện công nghiệp của hãng Fuji Electric (Nhật Bản): MCCB, MCB, Contactor, Servo Motor, biến tần, màn hình cảm ứng, PLC...
An overview of diagnostic tools used in RESNET testingBill Spohn
Learn about the variety of tools and test instruments that apply in RESNET standards 310 (pending) and 380. We'll cover the proper procedures as well as pros and cons of various devices.
International Journal of Engineering Research and DevelopmentIJERD Editor
Electrical, Electronics and Computer Engineering,
Information Engineering and Technology,
Mechanical, Industrial and Manufacturing Engineering,
Automation and Mechatronics Engineering,
Material and Chemical Engineering,
Civil and Architecture Engineering,
Biotechnology and Bio Engineering,
Environmental Engineering,
Petroleum and Mining Engineering,
Marine and Agriculture engineering,
Aerospace Engineering.
Bluon TdX 20 Compared to R-22 Testing SummaryBluon Energy
Bluon TdX 20 has been formulated as a drop-in replacement for R-22 in existing equipment. Rather than a pure chemical like R-22, Bluon TdX is a proprietary!
Toshniwal - Thermal mass flow meters and controllerSangeethaS99
THERMAL MASS FLOW METERS AND CONTROLLER
The range of Thermal Mass Flow Meters from Bronkhorst address high accuracy in low flow rate scenarios like those seen in laboratory and Pilot plant usages. With a housing designed for laboratory and clean processing conditions, the instruments are truly unique in their capability to measure and control flow ranges between 0,014…0,7 mln/min and 8…1670 ln/min with pressure rating between vacuum and 400 bar – all in one range of instruments.
FEATURES
Rangeability in digital mode up to 1:150
High accuracy (standard 0,5% Rd plus 0,1% FS)
Pressure ratings 64 / 100 bar
Highly resistant to mechanical shocks and pressure fluctuations
Large range of Input/output options to choose from
Extremely fast and dynamic response
User configurable control characteristics
Applications
Analytical/environmental equipment
Gas flow monitoring in food, chemical and petrochemical industries
Gas consumption measurement in gas distribution systems for internal accounting purposes
Detection of gas leakage through objects
Semiconductor manufacturing
Surface treatment installations
Eta constant temperature and humidity test chamberMark Tung
ETA Constant Temperature and Humidity Test Chamber is used to test the performance of materials in various environments. It provides a
simulated environment for testing the heat resistance, cold resistance, dry resistance and humidity resistance of materials. Suitable for
electronics, electrical appliances, communications, instrumentation, vehicles, plastic products, metals, food, chemistry, building materials,
medical, aerospace products, scientific research and other industries
TEMPERATURE MEASUREMENT:
RESISTANCE ELEMENTS AND THERMOCOUPLES
SPECIFICATION OF FUNCTION
DESCRIPTION OF FLUID
NORMAL OPERATING TEMPERATURE
REQUIRED TEMPERATURE RANGE
ALARM SETTINGS
TRIP SETTINGS
FLUID VELOCITY
REYNOLDS NUMBER
LINE SIZE
LINE REFERENCE
EQUIPMENT REFERENCE
NOZZLE SIZE
MINIMUM DESIGN PRESSURE
CORRESPONDING TEMPERATURE
MAXIMUM DESIGN PRESSURE
CORRESPONDING TEMPERATURE
Similar to Introduction to Boiler Control Systems (20)
INTERIOR LIGHTING DESIGN A STUDENT'S GUIDEno suhaila
This guide on lighting design is intended for students who have no prior knowledge of lighting and also for those who are experienced but would like to bring themselves up to date with developments in lamp and luminaire design, modern design theory, European Standards and the CIBSE code for Interior Lighting 1994.
It develops the basic principles of lighting science but then goes on to provide a modern design perspective for both artificial lighting and day lighting which will be useful to experienced designers.
Interior Lighting: Bringing Rooms To Life teaches the basics of residential interior lighting. The liveaction video demonstrates how the angle, quality, and intensity of light influence how it is perceived and used.
The program explains ambient lighting, task lighting, and accent lighting. It demonstrates different kinds of lamps and lighting fixtures and shows how each contributes to the overall interior design plan.
The video is aimed at students taking introductory courses in interior design or lighting.
Led Lighting (CIBSE Code for Interior Lighting, 1994)no suhaila
There are many standards pertaining to the recommended lighting lux values and the Health & Safety Executive document HSG38 provides guidance on how lighting affects the health and safety of people at work.
How to Make a Field invisible in Odoo 17Celine George
It is possible to hide or invisible some fields in odoo. Commonly using “invisible” attribute in the field definition to invisible the fields. This slide will show how to make a field invisible in odoo 17.
2024.06.01 Introducing a competency framework for languag learning materials ...Sandy Millin
http://sandymillin.wordpress.com/iateflwebinar2024
Published classroom materials form the basis of syllabuses, drive teacher professional development, and have a potentially huge influence on learners, teachers and education systems. All teachers also create their own materials, whether a few sentences on a blackboard, a highly-structured fully-realised online course, or anything in between. Despite this, the knowledge and skills needed to create effective language learning materials are rarely part of teacher training, and are mostly learnt by trial and error.
Knowledge and skills frameworks, generally called competency frameworks, for ELT teachers, trainers and managers have existed for a few years now. However, until I created one for my MA dissertation, there wasn’t one drawing together what we need to know and do to be able to effectively produce language learning materials.
This webinar will introduce you to my framework, highlighting the key competencies I identified from my research. It will also show how anybody involved in language teaching (any language, not just English!), teacher training, managing schools or developing language learning materials can benefit from using the framework.
Biological screening of herbal drugs: Introduction and Need for
Phyto-Pharmacological Screening, New Strategies for evaluating
Natural Products, In vitro evaluation techniques for Antioxidants, Antimicrobial and Anticancer drugs. In vivo evaluation techniques
for Anti-inflammatory, Antiulcer, Anticancer, Wound healing, Antidiabetic, Hepatoprotective, Cardio protective, Diuretics and
Antifertility, Toxicity studies as per OECD guidelines
Macroeconomics- Movie Location
This will be used as part of your Personal Professional Portfolio once graded.
Objective:
Prepare a presentation or a paper using research, basic comparative analysis, data organization and application of economic information. You will make an informed assessment of an economic climate outside of the United States to accomplish an entertainment industry objective.
A Strategic Approach: GenAI in EducationPeter Windle
Artificial Intelligence (AI) technologies such as Generative AI, Image Generators and Large Language Models have had a dramatic impact on teaching, learning and assessment over the past 18 months. The most immediate threat AI posed was to Academic Integrity with Higher Education Institutes (HEIs) focusing their efforts on combating the use of GenAI in assessment. Guidelines were developed for staff and students, policies put in place too. Innovative educators have forged paths in the use of Generative AI for teaching, learning and assessments leading to pockets of transformation springing up across HEIs, often with little or no top-down guidance, support or direction.
This Gasta posits a strategic approach to integrating AI into HEIs to prepare staff, students and the curriculum for an evolving world and workplace. We will highlight the advantages of working with these technologies beyond the realm of teaching, learning and assessment by considering prompt engineering skills, industry impact, curriculum changes, and the need for staff upskilling. In contrast, not engaging strategically with Generative AI poses risks, including falling behind peers, missed opportunities and failing to ensure our graduates remain employable. The rapid evolution of AI technologies necessitates a proactive and strategic approach if we are to remain relevant.
The French Revolution, which began in 1789, was a period of radical social and political upheaval in France. It marked the decline of absolute monarchies, the rise of secular and democratic republics, and the eventual rise of Napoleon Bonaparte. This revolutionary period is crucial in understanding the transition from feudalism to modernity in Europe.
For more information, visit-www.vavaclasses.com
Read| The latest issue of The Challenger is here! We are thrilled to announce that our school paper has qualified for the NATIONAL SCHOOLS PRESS CONFERENCE (NSPC) 2024. Thank you for your unwavering support and trust. Dive into the stories that made us stand out!
Unit 8 - Information and Communication Technology (Paper I).pdfThiyagu K
This slides describes the basic concepts of ICT, basics of Email, Emerging Technology and Digital Initiatives in Education. This presentations aligns with the UGC Paper I syllabus.
Francesca Gottschalk - How can education support child empowerment.pptxEduSkills OECD
Francesca Gottschalk from the OECD’s Centre for Educational Research and Innovation presents at the Ask an Expert Webinar: How can education support child empowerment?
Synthetic Fiber Construction in lab .pptxPavel ( NSTU)
Synthetic fiber production is a fascinating and complex field that blends chemistry, engineering, and environmental science. By understanding these aspects, students can gain a comprehensive view of synthetic fiber production, its impact on society and the environment, and the potential for future innovations. Synthetic fibers play a crucial role in modern society, impacting various aspects of daily life, industry, and the environment. ynthetic fibers are integral to modern life, offering a range of benefits from cost-effectiveness and versatility to innovative applications and performance characteristics. While they pose environmental challenges, ongoing research and development aim to create more sustainable and eco-friendly alternatives. Understanding the importance of synthetic fibers helps in appreciating their role in the economy, industry, and daily life, while also emphasizing the need for sustainable practices and innovation.
Thesis Statement for students diagnonsed withADHD.ppt
Introduction to Boiler Control Systems
1. Introduction to Boiler Control
Systems
Course No: E03-017
Credit: 3 PDH
J. Paul Guyer, P.E., R.A., Fellow ASCE, Fellow AEI
Continuing Education and Development, Inc.
9 Greyridge Farm Court
Stony Point, NY 10980
P: (877) 322-5800
F: (877) 322-4774
info@cedengineering.com