MINERAL RESOURCE AND RESERVE DECLARATIONS AND ASSET MANAGEMENT; Resource Evaluation; Mineral Resource Asset Management; Inferred Mineral Resources; Indicated Mineral Resources; Measured Mineral Resources; Mineral reserves; Reserve definition; Feasibility study; GEOLOGIC CONDITIONS AND CHARACTERISTIC OF ORE DEPOSITS; MINE GEOLOGY RESPONSIBILITIES; Geological Database Configuration; Ore Control Process
MINERAL RESOURCE AND RESERVE DECLARATIONS AND ASSET MANAGEMENT; Resource Evaluation; Mineral Resource Asset Management; Inferred Mineral Resources; Indicated Mineral Resources; Measured Mineral Resources; Mineral reserves; Reserve definition; Feasibility study; GEOLOGIC CONDITIONS AND CHARACTERISTIC OF ORE DEPOSITS; MINE GEOLOGY RESPONSIBILITIES; Geological Database Configuration; Ore Control Process
Metallogenic Epoch and Province
Metallogenetic Epochs
Metallogenetic epochs, as defined above, are specific periods characterised by formation of large number of mineral deposits. It does not mean that all the mineral deposits formed during a definite metallogenetic epochs. In India the chief metallogenetic epochs were:
1. Precambrian
2. Late Palaeozoic
3. Late Mesozoic to Early Tertiary
CLASSIFICATION OF ORE DEPOSITS
The Mixture of ore minerals are gangue minerals form an Ore deposit. The ore
deposits are generally found enclosed within the country rocks. The ore deposits
are formed in many different ways. Depending upon the process that may
operate to produce them, the ore deposits may be classified as follow:
Magmatic ore deposits.
Sublimation ore deposits.
Pegmatitic ore deposits.
Contact metasomatic ore deposits.
Hydrothermal ore deposits
Cavity filling deposits.
Replacement deposits.
Sedimentation ore deposits.
Evaporation ore deposits.
Residual and mechanical concentration deposits
Metamorphic ore deposits.
MAGMATIC ORE DEPOSITS:
The magmatic ore deposits are the magmatic products which crystallize from
magmas. The magmatic ore deposits are classified as follows:
o Early magmatic deposits
o Late magmatic deposits
Early magmatic deposits:
Early magmatic deposits are formed during the
early stage of the magmatic period. In this case the
ore minerals crystallize earlier than the rock
silicates. The Minerals of Nickel, Chromium, and
Platinum are usually found as early magmatic
deposits. The early magmatic deposits can be sub
divided into two groups:
o Dissemination deposits
o Segregation deposits
Dissemination deposits:
When magma crystallizes
conditions, a granular igneous rock is formed. In
such a rock early formed crystals of
may occur in dissemination.
Segregation deposits:
Magmatic segregation deposits are
formed as a result of gravitative
crystallization differentiation. In
case, the ore mineral which crystallize
early, get ocean-trated on a particular
part of igneous part. The ore deposits
thus formed are known as “Segregation
deposits”.
rly under seated
ore minerals
such
Late Magmatic Deposits:
The ore deposits which are formed to
called late magmatic deposits. The late magmatic deposits contain those ore
minerals which have crystallized at rather low temperature from the residual
magma. The magma which is left after crystallization of early for
is called residual magma. This magma frequently contains many ore minerals. The
late magmatic deposits include most of the magmatic deposits of iron and
titanium ores, these deposits are almost always associated with mafic igneous
rocks.
SUBLIMATION DEPOSITS:
Sublimation is a very minor process of formation of ore deposits. Sublimation
deposits contain only those minerals which have been volatilized by hear and
subsequently redeposit in the same form at low temperature and pressure. The
sublimation deposits are found associated with Volcanoes and Fumaroles. Sulfur
of this origin has been mined in Japan, Italy, and Mexico.
A presentation on Hydrothermal wall rock alteration with case studies on geophysical applications.
References : https://drive.google.com/drive/folders/16VSZMPMASMNVB47JdBUa_7udBk1qvK2U?usp=sharing
Information about these fluids is an invaluable aid in mineral exploration.
Conventional academic methods of analysing fluid inclusions are too slow and tedious to be of practical application in typical mineral exploration activities.
However, the academic data from numerous studies does show that CO2 is an exceptionally important indicator when exploring for most types of gold deposit.
Because the baro-acoustic decrepitation method is a rapid and reliable method to measure CO2 contents in fluids, it can be used to study a spatial array of data and it is an invaluable and practical exploration method.
Measurements of temperatures of fluid inclusions does not usually help in mineral exploration as hydrothermal minerals deposit over a wide temperature range and there is no specific temperature which is indicative of mineralisation. However, if temperatures are available on a large spatial array of samples, then temperature trends may be a useful exploration method to find the hottest part of the system, which is presumably the location of the best economic mineralisation. Baro-acoustic decrepitation is the most practical method to determine temperatures of the large numbers of samples required.
Salinities of fluid inclusions are of limited use in exploration and are difficult to measure. However, they can be used to recognise intrusion related hydrothermal systems.
The mineral reserves & reserves estimation using triangular methods Numan Hossain
It includes the introduction about mineral reserves. It also introducing triangular method to estimate the mineral reserves. Here after solving related problems some relevant problems are introduced for practice.Hope, it will be helpful who wants to estimate ore reserves using triangular methods. Here, the differences between probable and proven reserves also displayed.
Metallogenic Epoch and Province
Metallogenetic Epochs
Metallogenetic epochs, as defined above, are specific periods characterised by formation of large number of mineral deposits. It does not mean that all the mineral deposits formed during a definite metallogenetic epochs. In India the chief metallogenetic epochs were:
1. Precambrian
2. Late Palaeozoic
3. Late Mesozoic to Early Tertiary
CLASSIFICATION OF ORE DEPOSITS
The Mixture of ore minerals are gangue minerals form an Ore deposit. The ore
deposits are generally found enclosed within the country rocks. The ore deposits
are formed in many different ways. Depending upon the process that may
operate to produce them, the ore deposits may be classified as follow:
Magmatic ore deposits.
Sublimation ore deposits.
Pegmatitic ore deposits.
Contact metasomatic ore deposits.
Hydrothermal ore deposits
Cavity filling deposits.
Replacement deposits.
Sedimentation ore deposits.
Evaporation ore deposits.
Residual and mechanical concentration deposits
Metamorphic ore deposits.
MAGMATIC ORE DEPOSITS:
The magmatic ore deposits are the magmatic products which crystallize from
magmas. The magmatic ore deposits are classified as follows:
o Early magmatic deposits
o Late magmatic deposits
Early magmatic deposits:
Early magmatic deposits are formed during the
early stage of the magmatic period. In this case the
ore minerals crystallize earlier than the rock
silicates. The Minerals of Nickel, Chromium, and
Platinum are usually found as early magmatic
deposits. The early magmatic deposits can be sub
divided into two groups:
o Dissemination deposits
o Segregation deposits
Dissemination deposits:
When magma crystallizes
conditions, a granular igneous rock is formed. In
such a rock early formed crystals of
may occur in dissemination.
Segregation deposits:
Magmatic segregation deposits are
formed as a result of gravitative
crystallization differentiation. In
case, the ore mineral which crystallize
early, get ocean-trated on a particular
part of igneous part. The ore deposits
thus formed are known as “Segregation
deposits”.
rly under seated
ore minerals
such
Late Magmatic Deposits:
The ore deposits which are formed to
called late magmatic deposits. The late magmatic deposits contain those ore
minerals which have crystallized at rather low temperature from the residual
magma. The magma which is left after crystallization of early for
is called residual magma. This magma frequently contains many ore minerals. The
late magmatic deposits include most of the magmatic deposits of iron and
titanium ores, these deposits are almost always associated with mafic igneous
rocks.
SUBLIMATION DEPOSITS:
Sublimation is a very minor process of formation of ore deposits. Sublimation
deposits contain only those minerals which have been volatilized by hear and
subsequently redeposit in the same form at low temperature and pressure. The
sublimation deposits are found associated with Volcanoes and Fumaroles. Sulfur
of this origin has been mined in Japan, Italy, and Mexico.
A presentation on Hydrothermal wall rock alteration with case studies on geophysical applications.
References : https://drive.google.com/drive/folders/16VSZMPMASMNVB47JdBUa_7udBk1qvK2U?usp=sharing
Information about these fluids is an invaluable aid in mineral exploration.
Conventional academic methods of analysing fluid inclusions are too slow and tedious to be of practical application in typical mineral exploration activities.
However, the academic data from numerous studies does show that CO2 is an exceptionally important indicator when exploring for most types of gold deposit.
Because the baro-acoustic decrepitation method is a rapid and reliable method to measure CO2 contents in fluids, it can be used to study a spatial array of data and it is an invaluable and practical exploration method.
Measurements of temperatures of fluid inclusions does not usually help in mineral exploration as hydrothermal minerals deposit over a wide temperature range and there is no specific temperature which is indicative of mineralisation. However, if temperatures are available on a large spatial array of samples, then temperature trends may be a useful exploration method to find the hottest part of the system, which is presumably the location of the best economic mineralisation. Baro-acoustic decrepitation is the most practical method to determine temperatures of the large numbers of samples required.
Salinities of fluid inclusions are of limited use in exploration and are difficult to measure. However, they can be used to recognise intrusion related hydrothermal systems.
The mineral reserves & reserves estimation using triangular methods Numan Hossain
It includes the introduction about mineral reserves. It also introducing triangular method to estimate the mineral reserves. Here after solving related problems some relevant problems are introduced for practice.Hope, it will be helpful who wants to estimate ore reserves using triangular methods. Here, the differences between probable and proven reserves also displayed.
Among the Subjects of Earth Sciences, Economic Geology deals with all the Mineral resources, mineral fuels, their distribution and their role for the economic development of a nation.
India has a good amount of all natural resources. Among the resources, minerals are the major contributors of the national economy. India is a country, much dependent on the available natural resources for its economy. This lesson is on the “ Mineral Resources in India”.
A Simple PPT that helps teachers share the lesson on Minerals and Energy Resources of NCERT a little better and more easily and effectively. Feedbacks are welcome
Cbse NCERT SOCIAL SCIENCE HISTORY GEOGRAPHY ECONOMICS POLITICAL SCIENCE CLASS 10 CHAPTER classifications of minerals conventional and non conventional energy resources
Minerals & Energy Resources
What Is Minerals?Its type ? Rocks? sedimentary rocks, igenious rock, etc., energy Consevation , energy -conventional And Non Conventional , Coal , Minerals, petroleum , Electricity, Nuclear Energy , Atomic Energy, Geothermal Energy , Types oF coals, Location Of The minerals . Why Need to conserve Minerals ?Save Earth
i hope dis helps you guys to make ur ppt's
basically I am just giving you all ideas, you can be as creative as you want when you make them.
if any comments or suggestions please let me know
thank you
Mineral Resources
1. Use and over exploitation
2. Minerals and their ores extraction
3. Mine Safety
4. Case Study
5. Environmental Problems
The environmental damage caused by mining activities are as follows:
1. Devegetation and defacing of landscape
2. Subsidence of land
3. Groundwater contamination
4. Surface water pollution
5. Air pollution
6. Occupational health hazard
Similar to Economic mineral resource of India (20)
This presentation explores a brief idea about the structural and functional attributes of nucleotides, the structure and function of genetic materials along with the impact of UV rays and pH upon them.
Deep Behavioral Phenotyping in Systems Neuroscience for Functional Atlasing a...Ana Luísa Pinho
Functional Magnetic Resonance Imaging (fMRI) provides means to characterize brain activations in response to behavior. However, cognitive neuroscience has been limited to group-level effects referring to the performance of specific tasks. To obtain the functional profile of elementary cognitive mechanisms, the combination of brain responses to many tasks is required. Yet, to date, both structural atlases and parcellation-based activations do not fully account for cognitive function and still present several limitations. Further, they do not adapt overall to individual characteristics. In this talk, I will give an account of deep-behavioral phenotyping strategies, namely data-driven methods in large task-fMRI datasets, to optimize functional brain-data collection and improve inference of effects-of-interest related to mental processes. Key to this approach is the employment of fast multi-functional paradigms rich on features that can be well parametrized and, consequently, facilitate the creation of psycho-physiological constructs to be modelled with imaging data. Particular emphasis will be given to music stimuli when studying high-order cognitive mechanisms, due to their ecological nature and quality to enable complex behavior compounded by discrete entities. I will also discuss how deep-behavioral phenotyping and individualized models applied to neuroimaging data can better account for the subject-specific organization of domain-general cognitive systems in the human brain. Finally, the accumulation of functional brain signatures brings the possibility to clarify relationships among tasks and create a univocal link between brain systems and mental functions through: (1) the development of ontologies proposing an organization of cognitive processes; and (2) brain-network taxonomies describing functional specialization. To this end, tools to improve commensurability in cognitive science are necessary, such as public repositories, ontology-based platforms and automated meta-analysis tools. I will thus discuss some brain-atlasing resources currently under development, and their applicability in cognitive as well as clinical neuroscience.
The use of Nauplii and metanauplii artemia in aquaculture (brine shrimp).pptxMAGOTI ERNEST
Although Artemia has been known to man for centuries, its use as a food for the culture of larval organisms apparently began only in the 1930s, when several investigators found that it made an excellent food for newly hatched fish larvae (Litvinenko et al., 2023). As aquaculture developed in the 1960s and ‘70s, the use of Artemia also became more widespread, due both to its convenience and to its nutritional value for larval organisms (Arenas-Pardo et al., 2024). The fact that Artemia dormant cysts can be stored for long periods in cans, and then used as an off-the-shelf food requiring only 24 h of incubation makes them the most convenient, least labor-intensive, live food available for aquaculture (Sorgeloos & Roubach, 2021). The nutritional value of Artemia, especially for marine organisms, is not constant, but varies both geographically and temporally. During the last decade, however, both the causes of Artemia nutritional variability and methods to improve poorquality Artemia have been identified (Loufi et al., 2024).
Brine shrimp (Artemia spp.) are used in marine aquaculture worldwide. Annually, more than 2,000 metric tons of dry cysts are used for cultivation of fish, crustacean, and shellfish larva. Brine shrimp are important to aquaculture because newly hatched brine shrimp nauplii (larvae) provide a food source for many fish fry (Mozanzadeh et al., 2021). Culture and harvesting of brine shrimp eggs represents another aspect of the aquaculture industry. Nauplii and metanauplii of Artemia, commonly known as brine shrimp, play a crucial role in aquaculture due to their nutritional value and suitability as live feed for many aquatic species, particularly in larval stages (Sorgeloos & Roubach, 2021).
Toxic effects of heavy metals : Lead and Arsenicsanjana502982
Heavy metals are naturally occuring metallic chemical elements that have relatively high density, and are toxic at even low concentrations. All toxic metals are termed as heavy metals irrespective of their atomic mass and density, eg. arsenic, lead, mercury, cadmium, thallium, chromium, etc.
Nucleophilic Addition of carbonyl compounds.pptxSSR02
Nucleophilic addition is the most important reaction of carbonyls. Not just aldehydes and ketones, but also carboxylic acid derivatives in general.
Carbonyls undergo addition reactions with a large range of nucleophiles.
Comparing the relative basicity of the nucleophile and the product is extremely helpful in determining how reversible the addition reaction is. Reactions with Grignards and hydrides are irreversible. Reactions with weak bases like halides and carboxylates generally don’t happen.
Electronic effects (inductive effects, electron donation) have a large impact on reactivity.
Large groups adjacent to the carbonyl will slow the rate of reaction.
Neutral nucleophiles can also add to carbonyls, although their additions are generally slower and more reversible. Acid catalysis is sometimes employed to increase the rate of addition.
hematic appreciation test is a psychological assessment tool used to measure an individual's appreciation and understanding of specific themes or topics. This test helps to evaluate an individual's ability to connect different ideas and concepts within a given theme, as well as their overall comprehension and interpretation skills. The results of the test can provide valuable insights into an individual's cognitive abilities, creativity, and critical thinking skills
The Evolution of Science Education PraxiLabs’ Vision- Presentation (2).pdfmediapraxi
The rise of virtual labs has been a key tool in universities and schools, enhancing active learning and student engagement.
💥 Let’s dive into the future of science and shed light on PraxiLabs’ crucial role in transforming this field!
Phenomics assisted breeding in crop improvementIshaGoswami9
As the population is increasing and will reach about 9 billion upto 2050. Also due to climate change, it is difficult to meet the food requirement of such a large population. Facing the challenges presented by resource shortages, climate
change, and increasing global population, crop yield and quality need to be improved in a sustainable way over the coming decades. Genetic improvement by breeding is the best way to increase crop productivity. With the rapid progression of functional
genomics, an increasing number of crop genomes have been sequenced and dozens of genes influencing key agronomic traits have been identified. However, current genome sequence information has not been adequately exploited for understanding
the complex characteristics of multiple gene, owing to a lack of crop phenotypic data. Efficient, automatic, and accurate technologies and platforms that can capture phenotypic data that can
be linked to genomics information for crop improvement at all growth stages have become as important as genotyping. Thus,
high-throughput phenotyping has become the major bottleneck restricting crop breeding. Plant phenomics has been defined as the high-throughput, accurate acquisition and analysis of multi-dimensional phenotypes
during crop growing stages at the organism level, including the cell, tissue, organ, individual plant, plot, and field levels. With the rapid development of novel sensors, imaging technology,
and analysis methods, numerous infrastructure platforms have been developed for phenotyping.
DERIVATION OF MODIFIED BERNOULLI EQUATION WITH VISCOUS EFFECTS AND TERMINAL V...Wasswaderrick3
In this book, we use conservation of energy techniques on a fluid element to derive the Modified Bernoulli equation of flow with viscous or friction effects. We derive the general equation of flow/ velocity and then from this we derive the Pouiselle flow equation, the transition flow equation and the turbulent flow equation. In the situations where there are no viscous effects , the equation reduces to the Bernoulli equation. From experimental results, we are able to include other terms in the Bernoulli equation. We also look at cases where pressure gradients exist. We use the Modified Bernoulli equation to derive equations of flow rate for pipes of different cross sectional areas connected together. We also extend our techniques of energy conservation to a sphere falling in a viscous medium under the effect of gravity. We demonstrate Stokes equation of terminal velocity and turbulent flow equation. We look at a way of calculating the time taken for a body to fall in a viscous medium. We also look at the general equation of terminal velocity.
ANAMOLOUS SECONDARY GROWTH IN DICOT ROOTS.pptxRASHMI M G
Abnormal or anomalous secondary growth in plants. It defines secondary growth as an increase in plant girth due to vascular cambium or cork cambium. Anomalous secondary growth does not follow the normal pattern of a single vascular cambium producing xylem internally and phloem externally.
1. Economic mineral resource of
India
BY:
THOMAS CHINNAPPAN .A ,
M.SC.APPLIED GEOLOGY,
PERIYAR UNIVERSITY,
SALEM.
2. Introduction :
• Earth has innumerable variety of valuable natural resources
• Economic mineral is broader, and includes minerals, metals, rocks and
hydrocarbons
• India has significant mineral resources of Coal (4th largest reserves in the
world), Iron ore, Manganese ore (7th largest reserve in the world as in 2013),
Mica, Bauxite (5th largest reserve in the world as in 2013), Chromite, Natural
gas, Diamonds, Limestone, Titanium and Thorium (world's largest along coast of
Kerala)
3. • Most of the metallic minerals in India occur in the peninsular plateau region in
the old crystalline rocks. Over 97 per cent of coal reserves occur in the valleys of
Damodar, Sone, Mahanadi and Godavari.
• Peninsular India is broadly divided into four Provinces from the considerations
of tectono-metallogenic evolution. Hence, geological evolution from Archaean
to Tertiary and related mineralisation have been dealt under Southern (Andhra
Pradesh, Karnataka, Kerala, Tamil Nadu, and Goa), Central (Madhya Pradesh,
Maharashtra and southern part of Uttar Pradesh), Western (Gujarat, Rajasthan
and Haryana) and Eastern (West Bengal, Bihar, Chhatishgarh, Jharkhand, Odisha,
Assam and Meghalaya) provinces
4. Categories of Economic Minerals:
• Economic Mineral resources fall into four broad categories: metals and
non-metals, mineral fuels, gemstones, and industrial minerals. Coal, oil,
and natural gas are treated as mineral fuels. Metals include gold, silver,
iron, copper, lead, and zinc. Rubies and diamonds are examples of
gemstones. All other minerals and rocks of economic significance, from
river gravel to sheet mica, are classified as industrial minerals. Industrial
and metallic minerals, because of their physical and chemical properties,
provide materials that are essential for modern society. They furnish raw
materials for construction and agriculture, and for the ceramic, chemical,
metallurgical, manufacturing, and energy-related industries. Economic
geology deals with the origin, occurrence, distribution and utility of all
these mineral resource
5. Minerals are classified into 10 major categories, on economic point of
view:
1. Metallic Minerals (Ferrous Group)
2. Metallic Minerals (Non-Ferrous Group)
3. Precious & Semi-precious Minerals
4. Strategic Minerals
5. Fertilizer Minerals
6. Refractory Minerals
7. Ceramic and Glass Minerals
8. Other Industrial Minerals
9. Minor Minerals
10. Mineral fuels ( Coal, Oil & Gas)
6. Precious metals
• Gold
• PGE (Platinum Group of Elements)
Ferrous metals
• Iron Ore
• Titaniferous vanadiferous magnetite
• Manganese
• Chromite
Base metals
• Copper,Lead and Zinc
7. Chemicals and Fertilisers
• Apatite
• Baryte
• Borax
• Gypsum
• Sulphur
• Pyrite
• Potash
• Rock Phosphate
Light metals
• Bauxite 88
• Tin 89
Gemstones and Precious stones
• Diamond 90
• Precious and Semi-precious Stones 106