Circuit lab 9 verification of maximum power transfer theorem@taj
•
0 likes•1,625 views
Circuit lab 9 verification of maximum power transfer theorem . This lecture is from my class lectures in IIT-JU. . Find me: Website: https://www.tajimiitju.blogspot.com Linked in: https://www.linkedin.com/in/tajimiitju Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1 Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk Facebook: https://www.facebook.com/tajim.mohammad Gitlab: https://gitlab.com/users/tajimiitju Google+: plus.google.com/+tajimiitju Email: tajim.mohammad.3@gmail.com Twitter: https://twitter.com/Tajim53
Report
Share
Report
Share
Recommended
Resonant Test System
The document describes a resonant AC voltage test system that uses a tunable inductive reactor to generate variable frequencies for testing capacitive objects like cables and capacitors, with advantages being low power demand, precise sine waves, and protection against disruptive discharges; tunable reactor modules are available from 250-1600kV and 50-9000kVA to meet standards and customer needs.
NTAMC
This presentation is about “Centralized control of entire transmission system from single point with fully automated
remote controlled sub-stations”.
Electrical Systems Safety
1. The document discusses electrical safety topics such as protection devices, residual current devices (RCDs), maximum demand calculations, cable selection, voltage drop, fault loop impedance, and mains earthing neutral (MEN) connections.
2. It provides information on circuit breaker operation, RCD functioning, methods for calculating maximum demand and cable sizing, and guidelines for determining allowable fault loop impedance.
3. The document also outlines procedures for safely isolating circuits, and explains the purpose of MEN connections at the main switchboard to complete an electrical earthing system.
Memasang instalasi tenaga listrik bangunan bertingkat
Ringkasan dokumen tersebut adalah:
1) Dokumen tersebut berisi soal ujian umum semester genap tahun pelajaran 2009/2010 untuk program studi Teknik Instalasi Tenaga Listrik di SMK Teratai Putih 1 Bekasi.
2) Soal terdiri dari pilihan ganda dan essay yang mencakup materi tentang komponen-komponen instalasi listrik dan konsep dasar listrik seperti tegangan, arus, daya.
3) Jawaban soal terdapat pada bagian
Comparison between European electricity market and American electricity marke...
PJM is a regional transmission organization that coordinates the movement of wholesale electricity in 13 states and Washington D.C. It ensures grid reliability and administers wholesale electricity markets. PJM focuses on keeping the lights on by scheduling generation to meet demand, administering markets to buy and sell electricity, and planning for future grid needs through transmission expansion and accounting for power plant retirements. While European markets involve more local and bilateral trading as well as zonal pricing, PJM uses locational marginal pricing in day-ahead and real-time markets to efficiently dispatch electricity on a regional scale.
prepaid energymeter
Prepaid energy meters allow customers to pay for electricity before using it, similar to prepaid mobile phones. With traditional energy meters, a person had to read meters and deliver bills each month, which was time-consuming and error-prone. Prepaid meters address these issues by automatically cutting off power when credit is exhausted, eliminating billing delays and disputes. The prepaid system uses smart cards or tokens to recharge the meter remotely via a microcontroller, LCD display, GSM modem and relays. This makes the process more convenient and efficient compared to traditional billing methods.
Newton Raphson
The document provides an overview of power system analysis and modeling. It discusses modeling of various power system components like generators, transformers, transmission lines, and induction motors using equivalent circuits. It also covers per unit calculations and formation of impedance and reactance diagrams from a single line diagram. The document further discusses power flow analysis using bus admittance matrix and different iterative methods. It covers balanced and unbalanced fault analysis using symmetrical components. It concludes with discussing power system stability including steady state, transient, and voltage stability.
mengatur kecepatan motor induksi dengan mengubah jumlah kutub
Dokumen ini membahas tentang motor induksi Dahlander yang dapat mengubah kecepatan putarnya dengan mengubah jumlah kutub rotor. Motor ini memiliki dua kecepatan putar yang berbanding 1:2 seperti 1500/750 rpm atau 3000/1500 rpm dengan kombinasi kutub yang umum adalah 4:2, 8:4, dan 12:6. Jumlah kutub mempengaruhi torsi dan daya motor pada kecepatan tinggi dan rendah.
Recommended
Resonant Test System
The document describes a resonant AC voltage test system that uses a tunable inductive reactor to generate variable frequencies for testing capacitive objects like cables and capacitors, with advantages being low power demand, precise sine waves, and protection against disruptive discharges; tunable reactor modules are available from 250-1600kV and 50-9000kVA to meet standards and customer needs.
NTAMC
This presentation is about “Centralized control of entire transmission system from single point with fully automated
remote controlled sub-stations”.
Electrical Systems Safety
1. The document discusses electrical safety topics such as protection devices, residual current devices (RCDs), maximum demand calculations, cable selection, voltage drop, fault loop impedance, and mains earthing neutral (MEN) connections.
2. It provides information on circuit breaker operation, RCD functioning, methods for calculating maximum demand and cable sizing, and guidelines for determining allowable fault loop impedance.
3. The document also outlines procedures for safely isolating circuits, and explains the purpose of MEN connections at the main switchboard to complete an electrical earthing system.
Memasang instalasi tenaga listrik bangunan bertingkat
Ringkasan dokumen tersebut adalah:
1) Dokumen tersebut berisi soal ujian umum semester genap tahun pelajaran 2009/2010 untuk program studi Teknik Instalasi Tenaga Listrik di SMK Teratai Putih 1 Bekasi.
2) Soal terdiri dari pilihan ganda dan essay yang mencakup materi tentang komponen-komponen instalasi listrik dan konsep dasar listrik seperti tegangan, arus, daya.
3) Jawaban soal terdapat pada bagian
Comparison between European electricity market and American electricity marke...
PJM is a regional transmission organization that coordinates the movement of wholesale electricity in 13 states and Washington D.C. It ensures grid reliability and administers wholesale electricity markets. PJM focuses on keeping the lights on by scheduling generation to meet demand, administering markets to buy and sell electricity, and planning for future grid needs through transmission expansion and accounting for power plant retirements. While European markets involve more local and bilateral trading as well as zonal pricing, PJM uses locational marginal pricing in day-ahead and real-time markets to efficiently dispatch electricity on a regional scale.
prepaid energymeter
Prepaid energy meters allow customers to pay for electricity before using it, similar to prepaid mobile phones. With traditional energy meters, a person had to read meters and deliver bills each month, which was time-consuming and error-prone. Prepaid meters address these issues by automatically cutting off power when credit is exhausted, eliminating billing delays and disputes. The prepaid system uses smart cards or tokens to recharge the meter remotely via a microcontroller, LCD display, GSM modem and relays. This makes the process more convenient and efficient compared to traditional billing methods.
Newton Raphson
The document provides an overview of power system analysis and modeling. It discusses modeling of various power system components like generators, transformers, transmission lines, and induction motors using equivalent circuits. It also covers per unit calculations and formation of impedance and reactance diagrams from a single line diagram. The document further discusses power flow analysis using bus admittance matrix and different iterative methods. It covers balanced and unbalanced fault analysis using symmetrical components. It concludes with discussing power system stability including steady state, transient, and voltage stability.
mengatur kecepatan motor induksi dengan mengubah jumlah kutub
Dokumen ini membahas tentang motor induksi Dahlander yang dapat mengubah kecepatan putarnya dengan mengubah jumlah kutub rotor. Motor ini memiliki dua kecepatan putar yang berbanding 1:2 seperti 1500/750 rpm atau 3000/1500 rpm dengan kombinasi kutub yang umum adalah 4:2, 8:4, dan 12:6. Jumlah kutub mempengaruhi torsi dan daya motor pada kecepatan tinggi dan rendah.
Dc Distribution
This document contains 11 problems related to direct current (DC) and alternating current (AC) distribution systems. The problems involve calculating voltages, currents, power dissipation, and phase angles given information about line resistances and reactances, load locations and values, and supply voltages. Solutions are provided for cross-sectional area, voltages, currents, resistances, power dissipation, and minimum voltage points.
JARINGAN TEGANGAN MENENGAH
Jaringan tegangan menengah atau sering disebut jaringan distribusi primer merupakan bagian dari sistem tenaga listrik antar gardu induk dan gardu distribusi.Pada jaringan distribusi primer umumnya terdiri dari jaringan tiga - fasa dengan menggunakan tiga atau empat kawat sebagai penghantar.Pada pendistribusian tenaga listrik ke pengguna tenaga listrik di suatu kawasan, penggunaan sistem Tegangan Menengah sebagai jaringan utama adalah upaya utama menghindarkan rugi-rugi penyaluran (losses) dengan kualitas persyaratan tegangan yang harus dipenuhi oleh PT PLN Persero selaku pemegang Kuasa Usaha Utama sebagaimana diatur dalam UU ketenagalistrikan No 30 tahun 2009. Dengan ditetapkannya standar Tegangan Menengah sebagai tegangan operasi yang digunakan di Indonesia adalah 20 kV
Neutral Grounding Resistance (NGR) in the Transformer
Neutral Grounding Resistance in the Trasnformer
Three phase power measurement
This document describes an experiment to measure three-phase power under balanced and unbalanced resistive load conditions using a two-wattmeter method. The apparatus required includes voltmeters, ammeters, wattmeters, an autotransformer, and rheostats. Under balanced loads, power measurements are taken at different resistance settings and verified against calculations. Under unbalanced loads, measurements are taken to intentionally create an imbalance, and results are again checked against computations. Precautions include ensuring tight connections and initially setting the autotransformer output to zero voltage.
Simple Disconnector Switch (DS) Testing for Switchyard Equipment
The commissioning test report summarizes testing of a disconnector and earth switch at a substation for a customer. It lists the contractor and customer witnesses who were present for the testing. Measurement results are provided for resistance and insulation resistance tests between phases and of open contacts using a 5kV insulation tester. Operation checks showed the disconnector's electrical and manual operations and the earth switch 1's electrical and manual operations were okay, while earth switch 2 tests were not applicable.
Emtp rv ic-part1
The document provides an overview of modeling guidelines for simulating power system transients using EMTP-RV software. It discusses modeling transmission lines, substations, and their components like towers, insulators, lightning strikes. Guidelines from standards bodies are summarized for modeling towers as distributed lines or multistory structures. Insulator flashover models like leader propagation and area criterion are presented. The example shows calculating surge impedances for a tower divided into four sections.
Primry & backup protection
This document discusses power system protection components and devices. It describes the key elements which include current and voltage transformers, protective relays, circuit breakers, batteries, and fuses. These components work together to isolate faults and protect different elements of the electrical network. The document also discusses primary and backup protection methods, types of backup protection, and measures for evaluating protection system performance such as reliability, selectivity, speed and economy.
Microgrid
This presentation explains you about microgrids with crisp points.
Important applications of microgrid also specified in this presentation.
Lightning arrester dan gejala petir
pembahasan mengenai definisi, prinsip kerja, macam-macam lightning arrester dan gejala terjadinya sambaran petir,
Dasar pembangkit dan pengukuran teknik tegangan tinggi
Dokumen menjelaskan tentang definisi tegangan tinggi menurut berbagai negara. Tegangan tinggi didefinisikan mulai dari 0,6 KV hingga ribuan volt. Negara-negara membagi tegangan tinggi menjadi beberapa kategori seperti tinggi, menengah, ekstra tinggi, dan ultra tinggi dengan batas berbeda-beda. Di Eropa, tegangan tinggi adalah 0,6-2,4 KV, menengah 3-30 KV, ekstra tinggi 60-100 KV,
Smart grid technology
this slide shows what is smart grid ,its comparison between the electromechanical grids . smart meters and devises for the smart grid . benefit of smart grid . and a conclution
Testing of Circuit Breakers.pptx
The document discusses different methods for testing circuit breakers. It describes synthetic testing methods, which use separate sources for the short-circuit current and transient recovery voltage. The two main synthetic test circuits are the parallel current-injection method and series voltage injection method. The parallel current-injection method uses a current source for the short-circuit current and capacitors to inject additional high-frequency current. The series voltage injection method uses a voltage source to apply the transient recovery voltage. Synthetic testing allows testing of higher voltage circuit breakers than direct testing methods.
Earth Fault Loop Impedance Summary.ppt
The document discusses how to calculate the maximum allowable earth fault loop impedance according to BS7671 2008 clause 411.4.5. The formula is Zs x Ia ≤ Uo, where Zs is the earth fault loop impedance in ohms, Ia is the current in amperes required to trip the circuit breaker within the relevant disconnection time, and Uo is the nominal line voltage to earth in volts. It provides the disconnection times for 230V systems and an example calculation for a 20A type D MCB to determine the maximum Zs value allowable.
PROTEKSI SISTEM TENAGA LISTRIK
Proteksi Tenaga Listrik merupakan alat pemutus dan penyambung pada suatu rangkaian sehingga jika pada rangkaian mengalami suatu gangguan maka alat yang digunakan untuk memutuskan dan menghubungkan dari suatu rangkaian dalam kadaan berbeban disebut pemutus tenaga (PMT) atau Circuit Breaker/CB.
Dimana alat tersebut dilengkapi dengan alat pemadam busur api sedangkan untuk memisahkan dari rangakain tanpa beban digunakan saklar pemisah beban atau Disconnecting switch (DS). Dimana alat ini hanya digunakan jika CB pemutus tenaga telah terbuka untuk memisahkan rangkaian
Tugas Kelompok 4 - Teknik Tegangan Tinggi - Prof.Ir. Syamsir Abduh , MM, Ph.D...
Dokumen tersebut membahas tentang teknik tegangan tinggi, termasuk definisi tegangan tinggi, klasifikasi tegangan di Indonesia, jenis tegangan tinggi, penggolongan tegangan tinggi berdasarkan bentuk, sebab, dan sifat, dasar-dasar pengujian tegangan tinggi, istilah-istilah pengujian, tujuan pengujian, jenis pengujian, dan pembahasan mengenai transformator pengujian.
ETAP - unbalanced load flow
This document discusses unbalanced load flow analysis in power systems. It notes that distribution and transmission systems can experience unbalanced loads. Unbalanced systems can cause overheating, protective relay tripping, power losses, transformer failure and interference. The document outlines methods for measuring unbalance and describes the current injection method for unbalanced load flow analysis. It provides details on modeling three-phase machines, loads, transformers and other system components. Examples are presented on applying unbalanced load flow analysis to the IEEE 4-node and 13-node test feeders.
Per unit analysis
This document discusses per-unit analysis and impedance/reactance diagrams of power systems. It provides examples of calculating the per-unit values of components in a sample power system using given base values, and drawing the corresponding reactance diagram. It also works through another example of determining new per-unit values when changing the base values, and drawing the updated reactance diagram. The document is intended to teach per-phase and per-unit analysis techniques.
Major blackout in the world
This document summarizes several major blackouts that have occurred worldwide. It provides details on the number of people affected, location, duration and key causes and lessons learned from each event. Some of the major blackouts discussed include the Northeast Blackout of 1965 affecting 30 million people in the US and Canada for 12 hours due to human error. The Southern Brazil Blackout of 1999 left 97 million without power for 30 hours after a lightning strike caused protective systems to fail. The Northeast Blackout of 2003 was caused by inadequate grid monitoring and affected 55 million for 16 hours, highlighting the need for mandatory reliability standards.
05_C_3_Differential Protection.ppt
1) The document discusses differential protection for transformers, generators, and motors. It describes the measuring principle of differential protection which compares currents entering and leaving a device.
2) Numerical relays can implement differential protection functions and compensate for issues like non-matching current transformers, vector groups, and dynamic currents.
3) The Siemens 7UM62 and 7UT6xx relay families provide differential protection capabilities for devices with two or three winding configurations.
Circuit lab 10 verification of norton's theorem@taj
Circuit lab 10 verification of norton s theorem@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Edc lab 5 - to implement a full wave rectifier using diode
Edc lab 5 - to implement a full wave rectifier using diode by Tajim
.
Jahangirnagar University, Bangladesh
More Related Content
What's hot
Dc Distribution
This document contains 11 problems related to direct current (DC) and alternating current (AC) distribution systems. The problems involve calculating voltages, currents, power dissipation, and phase angles given information about line resistances and reactances, load locations and values, and supply voltages. Solutions are provided for cross-sectional area, voltages, currents, resistances, power dissipation, and minimum voltage points.
JARINGAN TEGANGAN MENENGAH
Jaringan tegangan menengah atau sering disebut jaringan distribusi primer merupakan bagian dari sistem tenaga listrik antar gardu induk dan gardu distribusi.Pada jaringan distribusi primer umumnya terdiri dari jaringan tiga - fasa dengan menggunakan tiga atau empat kawat sebagai penghantar.Pada pendistribusian tenaga listrik ke pengguna tenaga listrik di suatu kawasan, penggunaan sistem Tegangan Menengah sebagai jaringan utama adalah upaya utama menghindarkan rugi-rugi penyaluran (losses) dengan kualitas persyaratan tegangan yang harus dipenuhi oleh PT PLN Persero selaku pemegang Kuasa Usaha Utama sebagaimana diatur dalam UU ketenagalistrikan No 30 tahun 2009. Dengan ditetapkannya standar Tegangan Menengah sebagai tegangan operasi yang digunakan di Indonesia adalah 20 kV
Neutral Grounding Resistance (NGR) in the Transformer
Neutral Grounding Resistance in the Trasnformer
Three phase power measurement
This document describes an experiment to measure three-phase power under balanced and unbalanced resistive load conditions using a two-wattmeter method. The apparatus required includes voltmeters, ammeters, wattmeters, an autotransformer, and rheostats. Under balanced loads, power measurements are taken at different resistance settings and verified against calculations. Under unbalanced loads, measurements are taken to intentionally create an imbalance, and results are again checked against computations. Precautions include ensuring tight connections and initially setting the autotransformer output to zero voltage.
Simple Disconnector Switch (DS) Testing for Switchyard Equipment
The commissioning test report summarizes testing of a disconnector and earth switch at a substation for a customer. It lists the contractor and customer witnesses who were present for the testing. Measurement results are provided for resistance and insulation resistance tests between phases and of open contacts using a 5kV insulation tester. Operation checks showed the disconnector's electrical and manual operations and the earth switch 1's electrical and manual operations were okay, while earth switch 2 tests were not applicable.
Emtp rv ic-part1
The document provides an overview of modeling guidelines for simulating power system transients using EMTP-RV software. It discusses modeling transmission lines, substations, and their components like towers, insulators, lightning strikes. Guidelines from standards bodies are summarized for modeling towers as distributed lines or multistory structures. Insulator flashover models like leader propagation and area criterion are presented. The example shows calculating surge impedances for a tower divided into four sections.
Primry & backup protection
This document discusses power system protection components and devices. It describes the key elements which include current and voltage transformers, protective relays, circuit breakers, batteries, and fuses. These components work together to isolate faults and protect different elements of the electrical network. The document also discusses primary and backup protection methods, types of backup protection, and measures for evaluating protection system performance such as reliability, selectivity, speed and economy.
Microgrid
This presentation explains you about microgrids with crisp points.
Important applications of microgrid also specified in this presentation.
Lightning arrester dan gejala petir
pembahasan mengenai definisi, prinsip kerja, macam-macam lightning arrester dan gejala terjadinya sambaran petir,
Dasar pembangkit dan pengukuran teknik tegangan tinggi
Dokumen menjelaskan tentang definisi tegangan tinggi menurut berbagai negara. Tegangan tinggi didefinisikan mulai dari 0,6 KV hingga ribuan volt. Negara-negara membagi tegangan tinggi menjadi beberapa kategori seperti tinggi, menengah, ekstra tinggi, dan ultra tinggi dengan batas berbeda-beda. Di Eropa, tegangan tinggi adalah 0,6-2,4 KV, menengah 3-30 KV, ekstra tinggi 60-100 KV,
Smart grid technology
this slide shows what is smart grid ,its comparison between the electromechanical grids . smart meters and devises for the smart grid . benefit of smart grid . and a conclution
Testing of Circuit Breakers.pptx
The document discusses different methods for testing circuit breakers. It describes synthetic testing methods, which use separate sources for the short-circuit current and transient recovery voltage. The two main synthetic test circuits are the parallel current-injection method and series voltage injection method. The parallel current-injection method uses a current source for the short-circuit current and capacitors to inject additional high-frequency current. The series voltage injection method uses a voltage source to apply the transient recovery voltage. Synthetic testing allows testing of higher voltage circuit breakers than direct testing methods.
Earth Fault Loop Impedance Summary.ppt
The document discusses how to calculate the maximum allowable earth fault loop impedance according to BS7671 2008 clause 411.4.5. The formula is Zs x Ia ≤ Uo, where Zs is the earth fault loop impedance in ohms, Ia is the current in amperes required to trip the circuit breaker within the relevant disconnection time, and Uo is the nominal line voltage to earth in volts. It provides the disconnection times for 230V systems and an example calculation for a 20A type D MCB to determine the maximum Zs value allowable.
PROTEKSI SISTEM TENAGA LISTRIK
Proteksi Tenaga Listrik merupakan alat pemutus dan penyambung pada suatu rangkaian sehingga jika pada rangkaian mengalami suatu gangguan maka alat yang digunakan untuk memutuskan dan menghubungkan dari suatu rangkaian dalam kadaan berbeban disebut pemutus tenaga (PMT) atau Circuit Breaker/CB.
Dimana alat tersebut dilengkapi dengan alat pemadam busur api sedangkan untuk memisahkan dari rangakain tanpa beban digunakan saklar pemisah beban atau Disconnecting switch (DS). Dimana alat ini hanya digunakan jika CB pemutus tenaga telah terbuka untuk memisahkan rangkaian
Tugas Kelompok 4 - Teknik Tegangan Tinggi - Prof.Ir. Syamsir Abduh , MM, Ph.D...
Dokumen tersebut membahas tentang teknik tegangan tinggi, termasuk definisi tegangan tinggi, klasifikasi tegangan di Indonesia, jenis tegangan tinggi, penggolongan tegangan tinggi berdasarkan bentuk, sebab, dan sifat, dasar-dasar pengujian tegangan tinggi, istilah-istilah pengujian, tujuan pengujian, jenis pengujian, dan pembahasan mengenai transformator pengujian.
ETAP - unbalanced load flow
This document discusses unbalanced load flow analysis in power systems. It notes that distribution and transmission systems can experience unbalanced loads. Unbalanced systems can cause overheating, protective relay tripping, power losses, transformer failure and interference. The document outlines methods for measuring unbalance and describes the current injection method for unbalanced load flow analysis. It provides details on modeling three-phase machines, loads, transformers and other system components. Examples are presented on applying unbalanced load flow analysis to the IEEE 4-node and 13-node test feeders.
Per unit analysis
This document discusses per-unit analysis and impedance/reactance diagrams of power systems. It provides examples of calculating the per-unit values of components in a sample power system using given base values, and drawing the corresponding reactance diagram. It also works through another example of determining new per-unit values when changing the base values, and drawing the updated reactance diagram. The document is intended to teach per-phase and per-unit analysis techniques.
Major blackout in the world
This document summarizes several major blackouts that have occurred worldwide. It provides details on the number of people affected, location, duration and key causes and lessons learned from each event. Some of the major blackouts discussed include the Northeast Blackout of 1965 affecting 30 million people in the US and Canada for 12 hours due to human error. The Southern Brazil Blackout of 1999 left 97 million without power for 30 hours after a lightning strike caused protective systems to fail. The Northeast Blackout of 2003 was caused by inadequate grid monitoring and affected 55 million for 16 hours, highlighting the need for mandatory reliability standards.
05_C_3_Differential Protection.ppt
1) The document discusses differential protection for transformers, generators, and motors. It describes the measuring principle of differential protection which compares currents entering and leaving a device.
2) Numerical relays can implement differential protection functions and compensate for issues like non-matching current transformers, vector groups, and dynamic currents.
3) The Siemens 7UM62 and 7UT6xx relay families provide differential protection capabilities for devices with two or three winding configurations.
What's hot (20)
Neutral Grounding Resistance (NGR) in the Transformer
Neutral Grounding Resistance (NGR) in the Transformer
Simple Disconnector Switch (DS) Testing for Switchyard Equipment
Simple Disconnector Switch (DS) Testing for Switchyard Equipment
Dasar pembangkit dan pengukuran teknik tegangan tinggi
Dasar pembangkit dan pengukuran teknik tegangan tinggi
Tugas Kelompok 4 - Teknik Tegangan Tinggi - Prof.Ir. Syamsir Abduh , MM, Ph.D...
Tugas Kelompok 4 - Teknik Tegangan Tinggi - Prof.Ir. Syamsir Abduh , MM, Ph.D...
Similar to Circuit lab 9 verification of maximum power transfer theorem@taj
Circuit lab 10 verification of norton's theorem@taj
Circuit lab 10 verification of norton s theorem@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Edc lab 5 - to implement a full wave rectifier using diode
Edc lab 5 - to implement a full wave rectifier using diode by Tajim
.
Jahangirnagar University, Bangladesh
Edc lab 3 - breakdown characteristic of zener diode
This document describes an experiment on the characteristics of Zener diodes. The experiment uses a regulated power supply, Zener diode, resistances, multimeter and connecting wires. The procedure involves connecting the circuit as shown, varying the input voltage while keeping the load resistance constant to note the output voltage, and plotting the resulting graph. It also involves keeping the input voltage constant while varying the load resistance to note the corresponding readings. A data table is used to record the readings and a lab report on the experiment is required.
Circuit lab 7 verification of superposition theorem@taj
This document describes an electronics lab experiment to verify the Superposition Theorem. The objective is to be familiar with the theorem and verify its applicability. The theory states that in a linear bilateral network with multiple power sources, the current at any point is the sum of currents from each source considered separately. The procedure involves constructing a circuit with two power sources, measuring the total current, then measuring the current from each source individually and verifying their sum. Equipment includes power supplies, a multimeter, breadboard, resistors and wires. A lab report on the experiment is required.
Electrical Circuit Lab
The document provides information about the electrical engineering lab manual for the third semester, including the index, syllabus, instructions, lab ethics guidelines, and experiments. It outlines 12 experiments focused on writing programs in C and PSPICE to analyze and simulate DC, AC, and transient behavior of circuits. The first experiment involves drawing circuit symbols for common electrical components.
Introduction to PLC
This document provides an introduction to classic control components including relays, circuit breakers, contactors, overloads, timers, and counters. It describes the basic components of a classic control system including the control panel. It explains what each component is, including its structure and principles of operation. Methods for selecting, connecting, testing and addressing damages to these components are also covered. The document is an introductory overview of classic control targeted towards technical education students.
CRO PRObes,thermistor& Strip chart recorder
The document discusses thermistors, strip chart recorders, and CRO probes. Thermistors are resistors whose resistance decreases with increasing temperature and they are used for temperature measurement in applications like thermostats and battery monitoring. Strip chart recorders continuously record variables over time using a moving graph paper and stylus. CRO probes connect test circuits to oscilloscopes without disturbing the circuit and come in different types like direct reading, isolation, and detector probes.
Edc lab 4 - to implement a half wave rectifier using diode
This document describes an electronics lab experiment on implementing a half wave rectifier using a diode. The objectives are to build a half wave rectifier circuit using a diode, load resistance, capacitor, oscilloscope and signal generator. The procedure instructs how to connect the components, observe the rectified output on an oscilloscope, and measure input and output voltages with and without the capacitor. A lab report is required with the circuit diagram, procedure, measurements, equipment list, and expected output graph.
Edc lab 2 - i-v characteristic of zener diode
This document outlines an electronics lab experiment on measuring the I-V characteristic of a Zener diode. The experiment uses a DC power supply, Zener diode, resistor, and multimeter to build a circuit. Students will connect the circuit, vary the applied voltage and measure the corresponding output voltage and current readings. They will record the data in a table and plot a graph of voltage versus current to analyze the Zener diode's behavior under reverse bias and forward bias conditions. Students are expected to submit an individual lab report containing the topic, circuit diagram, procedure, data table, equipment list, and graph.
Experiment 1.1.pptx
This document provides information about an experiment to verify Kirchhoff's current law in a basic electrical and electronics engineering lab course. The objectives are to introduce Kirchhoff's current law and have students measure current and resistance in circuits to verify that the law holds true. The document outlines the required equipment, breadboard and multimeter use, the theory behind Kirchhoff's current law, an example circuit, observations that would be recorded, and expected learning outcomes.
Power System Structure
1) The document introduces an electrical power system lab that uses an Analog Model Power System (AMPS) to simulate various power system configurations and behaviors.
2) The objectives are to familiarize students with power system structure, transmission lines, power flow, and the supervisory control and data acquisition (SCADA) system. Tests will be conducted by varying transmission line impedances and load types and comparing results to theoretical calculations.
3) Detailed procedures are provided for setting up resistive and inductive loads on the AMPS and conducting tests while varying transmission line impedances from 100% to 70% to 30% and recording voltage, current, and power flow measurements.
Circuit lab 8 verification of thevenin's theorem@taj
Circuit lab 8 verification of thevenin's theorem@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Circuit lab 4 verification of ohm's law@taj
Circuit lab 4 verification of ohm's law@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Module 5 module 3 draft electrical and electronic layout and details
This module teaches how to draft electrical and electronic layout and details. It covers key concepts like direct and alternating current, electrical symbols, and how to draw wiring diagrams. The lessons provide guidance on drafting lighting plans, power layouts, and other electrical systems according to industry standards. Completing the exercises and assessments will help develop skills in drafting electrical drawings.
Module 5 module 3 draft electrical and electronic layout and details
Electrical and electronic drafting are rapidly evolving technologies involving circuits for products like computers and radios. This module teaches how to draw diagrams of electrical and electronic circuits using proper symbols, layout, and details. Learners will draft electrical plans and layouts, identifying symbols and components. They will also draft auxiliary systems and learn about electrical quantities like current, voltage, and resistance defined by Ohm's Law.
Module5 module3draftelectricalandelectroniclayoutanddetails-140806055304-phpa...
This module teaches how to draft electrical and electronic layout and details. It covers key concepts like direct and alternating current, electrical symbols, and how to draw wiring diagrams. The lessons provide guidance on drafting lighting plans, power layouts, and other electrical systems according to industry standards. Completing the exercises and assessments will help develop skills in drafting electrical drawings.
Experiment 1.pptx
This document provides instructions for an experiment to verify Kirchhoff's Current Law (KCL) using a circuit connected to a breadboard. The experiment uses a regulated DC power supply, digital multimeter, resistors, and connecting wires to build the KCL circuit. Students are asked to take voltage and current readings at different points in the circuit and use KCL calculations to determine if the experiment's observations match the theory. The objectives are to introduce students to KCL, demonstrate a KCL circuit, and have students practice applying KCL calculations.
Karnataka PGCET Electrical Science - Part B 2018 syllabus
This document contains the syllabus and model question paper for the electrical sciences subject area of Biomedical Engineering & Medical Electronics.
The syllabus covers topics like human anatomy and physiology, biomedical instrumentation, medical imaging systems, signals and systems/DSP, biomedical signal processing, and medical image processing.
The model questions are divided into two sections - Section I contains one mark questions, Section II contains two mark questions. The questions test knowledge of topics like biomedical transducers, medical devices, imaging modalities, filtering, segmentation, etc.
However, the model question papers for Sections I and II are not fully provided in the document. They need to be appended by the Instrumentation Board of Studies.
Electrical System Design Initial
This document provides an introduction to designing electrical power systems. It outlines several key factors to consider, including safety, reliability, flexibility, maintenance, and cost. Safety of equipment and personnel is the most important design consideration. The system should also be reliable, easy to operate and maintain, and able to accommodate future load and equipment changes. Additional topics covered include power sources, supply systems, climate conditions, load calculations, and basic electrical theory concepts needed for design such as Ohm's law, voltage, current, resistance, inductance, and capacitance.
Basics Of Energy Matering And Fraud Detection
This document discusses basics of energy metering and fraud detection. It covers types of single-phase and three-phase energy meters, testing of meters in laboratories and at field sites, and different types of tampering in energy meters. The contents include basics of power measurement in AC circuits, types of single-phase meters like induction and electronic meters, testing routines for single-phase meters in the lab, field testing of single-phase meters, types of three-phase meters, field and lab testing of three-phase meters, common tampering methods like potential link open and current bypass, and references.
Similar to Circuit lab 9 verification of maximum power transfer theorem@taj (20)
Circuit lab 10 verification of norton's theorem@taj
Circuit lab 10 verification of norton's theorem@taj
Edc lab 5 - to implement a full wave rectifier using diode
Edc lab 5 - to implement a full wave rectifier using diode
Edc lab 3 - breakdown characteristic of zener diode
Edc lab 3 - breakdown characteristic of zener diode
Circuit lab 7 verification of superposition theorem@taj
Circuit lab 7 verification of superposition theorem@taj
Edc lab 4 - to implement a half wave rectifier using diode
Edc lab 4 - to implement a half wave rectifier using diode
Circuit lab 8 verification of thevenin's theorem@taj
Circuit lab 8 verification of thevenin's theorem@taj
Module 5 module 3 draft electrical and electronic layout and details
Module 5 module 3 draft electrical and electronic layout and details
Module 5 module 3 draft electrical and electronic layout and details
Module 5 module 3 draft electrical and electronic layout and details
Module5 module3draftelectricalandelectroniclayoutanddetails-140806055304-phpa...
Module5 module3draftelectricalandelectroniclayoutanddetails-140806055304-phpa...
Karnataka PGCET Electrical Science - Part B 2018 syllabus
Karnataka PGCET Electrical Science - Part B 2018 syllabus
More from Tajim Md. Niamat Ullah Akhund
AI Lecture 7 (uncertainty)
This document discusses uncertainty and probability theory. It begins by explaining sources of uncertainty for autonomous agents from limited sensors and an unknown future. It then covers representing uncertainty with probabilities and Bayes' rule for updating beliefs. Examples show inferring diagnoses from symptoms using conditional probabilities. Independence is described as reducing the information needed for joint distributions. The document emphasizes probability theory and Bayesian reasoning for handling uncertainty.
AI Lecture 6 (logical agents)
The document discusses logical agents and knowledge-based agents. It covers topics including propositional logic, knowledge bases, logical inference, and different proof methods. Propositional logic is introduced as the simplest logic using symbols and truth tables. Knowledge bases contain representations of facts about the world in some formal language. Logical inference allows agents to derive new facts by applying inference rules without understanding meaning. Different proof methods for logical inference like model checking and natural deduction are also discussed.
AI Lecture 5 (game playing)
This document discusses game playing as an area of artificial intelligence research. It provides examples of how search algorithms like minimax and alpha-beta pruning have been used to develop computer programs that can play games like chess at a grandmaster level. Specifically, it mentions how IBM's Deep Blue program was able to defeat world chess champion Garry Kasparov through brute force search methods combined with these algorithms. The document then provides details on minimax search and how static board evaluation functions allow searches to estimate values beyond search depths.
AI Lecture 4 (informed search and exploration)
This document discusses informed search strategies and local search algorithms for optimization problems. It covers best-first search, greedy search, A* search, heuristic functions, hill-climbing search, and escaping local optima. Specifically, it provides examples of applying greedy search, A* search, and hill-climbing to solve the 8-puzzle problem and discusses the drawbacks of hill-climbing getting stuck at local maxima.
AI Lecture 3 (solving problems by searching)
The document discusses problem solving by searching. It describes problem solving agents and how they formulate goals and problems, search for solutions, and execute solutions. Tree search algorithms like breadth-first search, uniform-cost search, and depth-first search are described. Example problems discussed include the 8-puzzle, 8-queens, and route finding problems. The strategies of different uninformed search algorithms are explained.
AI Lecture 2 (intelligent agents)
This document discusses intelligent agents and their environments. It covers:
1) Intelligent agents are entities that perceive their environment through sensors and act upon the environment through actuators. They map percept sequences to actions.
2) A rational agent should select actions that are expected to maximize its performance measure given the percept sequence and its prior knowledge. Performance measures evaluate how well the agent solves its task.
3) Agent environments can have different properties such as being fully or partially observable, deterministic or stochastic, episodic or sequential, static or dynamic, discrete or continuous, and single-agent or multi-agent. The simplest is fully observable, deterministic, etc. but most real environments are more complex.
AI Lecture 1 (introduction)
This document provides an overview of an artificial intelligence course titled CSE 412 taught in fall 2018. It introduces topics that will be covered like what AI is, the foundations and history of AI, the state of the art in AI, philosophical foundations, and logic programming using Prolog. The instructor is Tajim Md. Niamat Ullah Akhund and the document outlines the major sections and contents to be covered in the course.
Course outline (cse 412 - artificial intelligence)
This document outlines the course details for the Artificial Intelligence course CSE 412 offered in the spring 2019 semester at Daffodil International University. The 3-credit course provides an introduction to the basic principles and applications of AI through topics like problem solving, game playing, logical agents, uncertainty, and natural language processing. Students will be assessed based on class attendance, assignments, tests, presentations, and exams. Grades use a letter system from A+ to F and are based on numerical scores. The course will be taught through required classes, tests, and assignments.
Artificial intelligence LAB 1 overview & intelligent systems
The document provides an overview of an AI lab course plan that includes both software and hardware implementations of artificial intelligence. The software portion covers topics like data preparation, supervised and unsupervised learning techniques, and natural language processing. The hardware portion involves building robots that can be controlled in various ways, including through Android apps, line following, RFID recognition, obstacle avoidance, and gestures or voice.
Matlab lecture 9 – simpson 1,3 and trapezoidal method@taj
Matlab lecture 9 – simpson 1,3 and trapezoidal method@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Matlab lecture 8 – newton's forward and backword interpolation@taj copy
Matlab lecture 8 – newton's forward and backword interpolation@taj copyTajim Md. Niamat Ullah Akhund
Matlab lecture 8 – newton's forward and backword interpolation@taj copy
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53Matlab lecture 7 – regula falsi or false position method@taj
Matlab lecture 7 – regula falsi or false position method@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Matlab lecture 6 – newton raphson method@taj copy
This document discusses using the Newton Raphson method in MATLAB to find the roots of nonlinear equations. It begins with an introduction to the Newton Raphson method and its use in solving equations that are too complex for algebraic methods. The objectives and theory behind the Newton Raphson method are then outlined. Examples are provided and the MATLAB code presented to find the roots of sample equations graphically and via the console output. The document walks through applying the Newton Raphson method in MATLAB to several equations.
Matlab lecture 5 bisection method@taj
Matlab lecture 5 bisection method@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Matlab lecture 4 loops@taj
Matlab lecture 4 loops@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Matlab lecture 3 – commands, the m files, data types, bitwise op, set@taj
Matlab lecture 3 – commands, the m files, data types, bitwise op, set@tajTajim Md. Niamat Ullah Akhund
Matlab lecture 3 – commands, the m files, data types, bitwise op, set@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53Matlab lecture 2 matlab basic syntax & variables @taj
This document provides an overview of MATLAB basics including:
- MATLAB syntax and variables - commands are executed immediately and results returned
- Common operators like % for comments and ; to suppress output
- Special variables like ans, eps, i, Inf, NaN, pi
- Defining and naming variables - they must be assigned before use
- Creating vectors and matrices - row vectors use spaces/commas, column uses semicolons
- Basic math operations on vectors and matrices
Matlab lecture 1 - installation of matlab, introduction and course outline@taj
Matlab lecture 1 - installation of matlab, introduction and course outline@tajTajim Md. Niamat Ullah Akhund
Matlab lecture 1 installation of matlab, introduction and course outline@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Circuit lab 6 kirchoff’s current law (kcl)@taj
Circuit lab 6 kirchoff’s current law (kcl)@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
Circuit lab 5 kirchoff’s voltage law (kvl)@taj
Circuit lab 5 kirchoff’s voltage law (kvl)@taj
.
This lecture is from my class lectures in IIT-JU.
.
Find me:
Website: https://www.tajimiitju.blogspot.com
Linked in: https://www.linkedin.com/in/tajimiitju
Researchgate: https://www.researchgate.net/profile/Tajim_Md_Niamat_Ullah_Akhund
Youtube: https://www.youtube.com/tajimiitju?sub_confirmation=1
Slideshare: https://www.slideshare.net/TajimMdNiamatUllahAk
Facebook: https://www.facebook.com/tajim.mohammad
Gitlab: https://gitlab.com/users/tajimiitju
Google+: plus.google.com/+tajimiitju
Email: tajim.mohammad.3@gmail.com
Twitter: https://twitter.com/Tajim53
More from Tajim Md. Niamat Ullah Akhund (20)
Course outline (cse 412 - artificial intelligence)
Course outline (cse 412 - artificial intelligence)
Artificial intelligence LAB 1 overview & intelligent systems
Artificial intelligence LAB 1 overview & intelligent systems
Matlab lecture 9 – simpson 1,3 and trapezoidal method@taj
Matlab lecture 9 – simpson 1,3 and trapezoidal method@taj
Matlab lecture 8 – newton's forward and backword interpolation@taj copy
Matlab lecture 8 – newton's forward and backword interpolation@taj copy
Matlab lecture 7 – regula falsi or false position method@taj
Matlab lecture 7 – regula falsi or false position method@taj
Matlab lecture 3 – commands, the m files, data types, bitwise op, set@taj
Matlab lecture 3 – commands, the m files, data types, bitwise op, set@taj
Matlab lecture 2 matlab basic syntax & variables @taj
Matlab lecture 2 matlab basic syntax & variables @taj
Matlab lecture 1 - installation of matlab, introduction and course outline@taj
Matlab lecture 1 - installation of matlab, introduction and course outline@taj
Recently uploaded
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Horizon Generation
Embedded machine learning-based road conditions and driving behavior monitoring
Car accident rates have increased in recent years, resulting in losses in human lives, properties, and other financial costs. An embedded machine learning-based system is developed to address this critical issue. The system can monitor road conditions, detect driving patterns, and identify aggressive driving behaviors. The system is based on neural networks trained on a comprehensive dataset of driving events, driving styles, and road conditions. The system effectively detects potential risks and helps mitigate the frequency and impact of accidents. The primary goal is to ensure the safety of drivers and vehicles. Collecting data involved gathering information on three key road events: normal street and normal drive, speed bumps, circular yellow speed bumps, and three aggressive driving actions: sudden start, sudden stop, and sudden entry. The gathered data is processed and analyzed using a machine learning system designed for limited power and memory devices. The developed system resulted in 91.9% accuracy, 93.6% precision, and 92% recall. The achieved inference time on an Arduino Nano 33 BLE Sense with a 32-bit CPU running at 64 MHz is 34 ms and requires 2.6 kB peak RAM and 139.9 kB program flash memory, making it suitable for resource-constrained embedded systems.
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Literature Review Basics and Understanding Reference Management.pptx
Three-day training on academic research focuses on analytical tools at United Technical College, supported by the University Grant Commission, Nepal. 24-26 May 2024
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
The smart irrigation system represents an innovative approach to optimize water usage in agricultural and landscaping practices. The integration of cutting-edge technologies, including sensors, actuators, and data analysis, empowers this system to provide accurate monitoring and control of irrigation processes by leveraging real-time environmental conditions. The main objective of a smart irrigation system is to optimize water efficiency, minimize expenses, and foster the adoption of sustainable water management methods. This paper conducts a systematic risk assessment by exploring the key components/assets and their functionalities in the smart irrigation system. The crucial role of sensors in gathering data on soil moisture, weather patterns, and plant well-being is emphasized in this system. These sensors enable intelligent decision-making in irrigation scheduling and water distribution, leading to enhanced water efficiency and sustainable water management practices. Actuators enable automated control of irrigation devices, ensuring precise and targeted water delivery to plants. Additionally, the paper addresses the potential threat and vulnerabilities associated with smart irrigation systems. It discusses limitations of the system, such as power constraints and computational capabilities, and calculates the potential security risks. The paper suggests possible risk treatment methods for effective secure system operation. In conclusion, the paper emphasizes the significant benefits of implementing smart irrigation systems, including improved water conservation, increased crop yield, and reduced environmental impact. Additionally, based on the security analysis conducted, the paper recommends the implementation of countermeasures and security approaches to address vulnerabilities and ensure the integrity and reliability of the system. By incorporating these measures, smart irrigation technology can revolutionize water management practices in agriculture, promoting sustainability, resource efficiency, and safeguarding against potential security threats.
bank management system in java and mysql report1.pdf
truth is high but higher still is truth full living
Low power architecture of logic gates using adiabatic techniques
The growing significance of portable systems to limit power consumption in ultra-large-scale-integration chips of very high density, has recently led to rapid and inventive progresses in low-power design. The most effective technique is adiabatic logic circuit design in energy-efficient hardware. This paper presents two adiabatic approaches for the design of low power circuits, modified positive feedback adiabatic logic (modified PFAL) and the other is direct current diode based positive feedback adiabatic logic (DC-DB PFAL). Logic gates are the preliminary components in any digital circuit design. By improving the performance of basic gates, one can improvise the whole system performance. In this paper proposed circuit design of the low power architecture of OR/NOR, AND/NAND, and XOR/XNOR gates are presented using the said approaches and their results are analyzed for powerdissipation, delay, power-delay-product and rise time and compared with the other adiabatic techniques along with the conventional complementary metal oxide semiconductor (CMOS) designs reported in the literature. It has been found that the designs with DC-DB PFAL technique outperform with the percentage improvement of 65% for NOR gate and 7% for NAND gate and 34% for XNOR gate over the modified PFAL techniques at 10 MHz respectively.
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Kinematics 11th jpp- 01. ( Solved ) unacademy namo kaul on 14th may...
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology towards Sustainable Steelmaking
A review on techniques and modelling methodologies used for checking electrom...
The proper function of the integrated circuit (IC) in an inhibiting electromagnetic environment has always been a serious concern throughout the decades of revolution in the world of electronics, from disjunct devices to today’s integrated circuit technology, where billions of transistors are combined on a single chip. The automotive industry and smart vehicles in particular, are confronting design issues such as being prone to electromagnetic interference (EMI). Electronic control devices calculate incorrect outputs because of EMI and sensors give misleading values which can prove fatal in case of automotives. In this paper, the authors have non exhaustively tried to review research work concerned with the investigation of EMI in ICs and prediction of this EMI using various modelling methodologies and measurement setups.
哪里办理(csu毕业证书)查尔斯特大学毕业证硕士学历原版一模一样
原版一模一样【微信：741003700 】【(csu毕业证书)查尔斯特大学毕业证硕士学历】【微信：741003700 】学位证，留信认证（真实可查，永久存档）offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原海外各大学 Bachelor Diploma degree, Master Degree Diploma
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
Recently uploaded (20)
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
RAT: Retrieval Augmented Thoughts Elicit Context-Aware Reasoning in Long-Hori...
Embedded machine learning-based road conditions and driving behavior monitoring
Embedded machine learning-based road conditions and driving behavior monitoring
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
Literature Review Basics and Understanding Reference Management.pptx
Literature Review Basics and Understanding Reference Management.pptx
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
A SYSTEMATIC RISK ASSESSMENT APPROACH FOR SECURING THE SMART IRRIGATION SYSTEMS
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
ML Based Model for NIDS MSc Updated Presentation.v2.pptx
bank management system in java and mysql report1.pdf
bank management system in java and mysql report1.pdf
Low power architecture of logic gates using adiabatic techniques
Low power architecture of logic gates using adiabatic techniques
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
[JPP-1] - (JEE 3.0) - Kinematics 1D - 14th May..pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
Iron and Steel Technology Roadmap - Towards more sustainable steelmaking.pdf
A review on techniques and modelling methodologies used for checking electrom...
A review on techniques and modelling methodologies used for checking electrom...
Circuit lab 9 verification of maximum power transfer theorem@taj
- 1. Electronic Devices and Circuits LAB (IT-1106) by Tajim 1
- 2. Circuit LAB 9- Verification of Maximum Power Transfer Theorem Experiment 9 by Tajim 2
- 3. by Tajim 3 Purpose/Objective The aim of this experiment is- To be familiar with the Maximum Power Transfer theorem and also to verify it. To know about its applicability.
- 4. by Tajim 4 Maximum power transfer theorem
- 6. by Tajim 6 Equipment/ Apparatus: a) Two regulated variable Power Supply (0-30 V) b) One Digital Multimeter c) Circuit Experiment Board (Breadboard) d) Three resistors e) Connecting wires f) Cutting tools etc. Cautions: 1. All connections should be tight and correct. 2. Switch off the supply when not in use. 3. Reading should be taken carefully.
- 8. Procedure:
- 10. by Tajim 10 Here the RL = Rth = 25 Ω
- 11. by Tajim 11
- 12. LAB Report 1. LAB report must be hand written. 2. Report on today’s LAB must be submitted on next class individually. 3. LAB report will contain: topic, brief description of the topic, circuit diagram, procedure, data table, equipment list and graph. by Tajim 12
- 13. by Tajim 13