This presentation includes information about the evaporator, its history, working, classification, general types, methods of feeding, application, performance, thermal/process and design consideration, thermal design calculation, present and future vision regarding evaporators.
Single and multiple effective evaporator (mee)Sumer Pankaj
A multiple-effect evaporator, as defined in chemical engineering, is an apparatus for efficiently using the heat from steam to evaporate water.[1] In a multiple-effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling temperature of water decreases as pressure decreases, the vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. While in theory, evaporators may be built with an arbitrarily large number of stages, evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product such as in chemical recovery systems where up to seven effects are used.
The multiple-effect evaporator was invented by an African-American inventor and engineer Norbert Rillieux. Although he may have designed the apparatus during the 1820s and constructed a prototype in 1834, he did not build the first industrially practical evaporator until 1845. Originally designed for concentrating sugar in sugar cane juice, it has since become widely used in all industrial applications where large volumes of water must be evaporated, such as salt production and water desalination.
Multiple effect evaporation commonly uses sensible heat in the condensate to preheat liquor to be flashed. In practice the design liquid flow paths can be somewhat complicated in order to extract the most recoverable heat and to obtain the highest evaporation rates from the equipment.
Multiple-effect evaporation plants in sugar beet factories have up to eight effects. Six effect evaporators are common in the recovery of black liquor in the kraft process for making wood pulp.
Different settling methods in mechanical operations Jaydrath Sindhav
Its part of sedimentation which is covered under the Mechanical operations. It contains the gravity sedimentation, clarifier and classifiers, sink and float method, gravity and sorting classifiers, differential settling methods etc....
Its just gives basic concept of sedimentation.
This presentation includes information about the evaporator, its history, working, classification, general types, methods of feeding, application, performance, thermal/process and design consideration, thermal design calculation, present and future vision regarding evaporators.
Single and multiple effective evaporator (mee)Sumer Pankaj
A multiple-effect evaporator, as defined in chemical engineering, is an apparatus for efficiently using the heat from steam to evaporate water.[1] In a multiple-effect evaporator, water is boiled in a sequence of vessels, each held at a lower pressure than the last. Because the boiling temperature of water decreases as pressure decreases, the vapor boiled off in one vessel can be used to heat the next, and only the first vessel (at the highest pressure) requires an external source of heat. While in theory, evaporators may be built with an arbitrarily large number of stages, evaporators with more than four stages are rarely practical except in systems where the liquor is the desired product such as in chemical recovery systems where up to seven effects are used.
The multiple-effect evaporator was invented by an African-American inventor and engineer Norbert Rillieux. Although he may have designed the apparatus during the 1820s and constructed a prototype in 1834, he did not build the first industrially practical evaporator until 1845. Originally designed for concentrating sugar in sugar cane juice, it has since become widely used in all industrial applications where large volumes of water must be evaporated, such as salt production and water desalination.
Multiple effect evaporation commonly uses sensible heat in the condensate to preheat liquor to be flashed. In practice the design liquid flow paths can be somewhat complicated in order to extract the most recoverable heat and to obtain the highest evaporation rates from the equipment.
Multiple-effect evaporation plants in sugar beet factories have up to eight effects. Six effect evaporators are common in the recovery of black liquor in the kraft process for making wood pulp.
Different settling methods in mechanical operations Jaydrath Sindhav
Its part of sedimentation which is covered under the Mechanical operations. It contains the gravity sedimentation, clarifier and classifiers, sink and float method, gravity and sorting classifiers, differential settling methods etc....
Its just gives basic concept of sedimentation.
Experimental Study of R134a, R406A and R600a Blends as Alternative To Freon 12IOSR Journals
: In the vent of chlorofluorocarbons (CFCs) phase-out, identify long term alternative to meet
requirements in respect of system performance and service is an important area of research in the refrigeration
and are conditioning industry. This work focuses on experimental study of the performance of eco-friendly
refrigerant mixtures. Mixtures of three existing refrigerants namely: R600a (n-butane), R134a (1,1,
1,2,tetrafluoroethane) and R406A (55%R22/4%R600a/41%R142b)were considered for this research. These
refrigerants were mixed in various ratios, studied and compared with R-12 (dichlorodifluoromethane) which
was used as the control for the experimentation. The rig used in the experimentation is a 2 hp (1.492 kW)
domestic refrigerator, designed based on condensing and evaporating temperatures. The rig was
tested with R-12, and blends of the three refrigerants. During the experimentation, both evaporator and
condenser temperatures were measured. These were used to determine the heat absorbed in evaporator
and the heat rejected incondenser . The results show that R134a/R600a mixture in the ratio 50:50 can
be used as alternative to R-12 in domestic refrigerators, without the necessity of changing the compressor
lubricating oil. At and , R-12 gives a COP of 2.08 while 50:50 blend of R134a/R600a
gives a COP of 2.30 under the same operating conditions
The International Journal of Mechanical Engineering Research and Technology is an international online journal in English published Quarterly offers a fast publication schedule whilst maintaining rigorous peer review the use of recommended electronic formats for article delivery expedites the process All submitted research articles are subjected to immediate rapid screening by the editors consultation with the Editorial Board or others working in the field as appropriate to ensure they are likely to be the level of interest and importance appropriate for the journal.
“Refrigerant is the media (fluid) used for heat transfer in a refrigerating system that absorbs heat during evaporation from the region of low temperature and pressure, and releases heat during condensation at a region of higher temperature and pressure.”
Presentation on Alternative Refrigerants related to mechanical engineering for application in mechanical systems (air conditoning and refrigerators etc) and chemical engineering
CO2 As A Future Refrigerant - An Aranca ReportAranca
As CO2 based refrigeration technology grows in both viability and availability, it shows appreciable promise to reduce atmospheric pollution by Ammonia and other often potent greenhouse gases. Read this Aranca report to know how alternative energy sector is gearing for the challenge.
Rural engineering process : Development of farms by automationShashank Kapoor
Hi All, In this Project we have used Arduino Microcontroller and Raspberry pi as processor for automation control of watering of fields and monitor through IOT devices, we have use different sensors like pumps, Humidity sensor, Temperature sensor, digital anemometer to calculate various reading like transpiration and wind velocity to get high productivity in farm fields.
MQTT is a standardized publish/subscribe Push protocol that was released by IBM in 1999. MQTT was planned to send a data accurately under the long network delay and low- bandwidth network condition.
Hello guys ,
As a passionate learner of c programming language, I have done my one month training in Learning advance features of C from "infomatics" center through very experienced teachers and for the fulfillment of my training i have submit this report .
Happy Reading
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Event Management System Vb Net Project Report.pdfKamal Acharya
In present era, the scopes of information technology growing with a very fast .We do not see any are untouched from this industry. The scope of information technology has become wider includes: Business and industry. Household Business, Communication, Education, Entertainment, Science, Medicine, Engineering, Distance Learning, Weather Forecasting. Carrier Searching and so on.
My project named “Event Management System” is software that store and maintained all events coordinated in college. It also helpful to print related reports. My project will help to record the events coordinated by faculties with their Name, Event subject, date & details in an efficient & effective ways.
In my system we have to make a system by which a user can record all events coordinated by a particular faculty. In our proposed system some more featured are added which differs it from the existing system such as security.
Quality defects in TMT Bars, Possible causes and Potential Solutions.PrashantGoswami42
Maintaining high-quality standards in the production of TMT bars is crucial for ensuring structural integrity in construction. Addressing common defects through careful monitoring, standardized processes, and advanced technology can significantly improve the quality of TMT bars. Continuous training and adherence to quality control measures will also play a pivotal role in minimizing these defects.
Democratizing Fuzzing at Scale by Abhishek Aryaabh.arya
Presented at NUS: Fuzzing and Software Security Summer School 2024
This keynote talks about the democratization of fuzzing at scale, highlighting the collaboration between open source communities, academia, and industry to advance the field of fuzzing. It delves into the history of fuzzing, the development of scalable fuzzing platforms, and the empowerment of community-driven research. The talk will further discuss recent advancements leveraging AI/ML and offer insights into the future evolution of the fuzzing landscape.
Final project report on grocery store management system..pdfKamal Acharya
In today’s fast-changing business environment, it’s extremely important to be able to respond to client needs in the most effective and timely manner. If your customers wish to see your business online and have instant access to your products or services.
Online Grocery Store is an e-commerce website, which retails various grocery products. This project allows viewing various products available enables registered users to purchase desired products instantly using Paytm, UPI payment processor (Instant Pay) and also can place order by using Cash on Delivery (Pay Later) option. This project provides an easy access to Administrators and Managers to view orders placed using Pay Later and Instant Pay options.
In order to develop an e-commerce website, a number of Technologies must be studied and understood. These include multi-tiered architecture, server and client-side scripting techniques, implementation technologies, programming language (such as PHP, HTML, CSS, JavaScript) and MySQL relational databases. This is a project with the objective to develop a basic website where a consumer is provided with a shopping cart website and also to know about the technologies used to develop such a website.
This document will discuss each of the underlying technologies to create and implement an e- commerce website.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Saudi Arabia stands as a titan in the global energy landscape, renowned for its abundant oil and gas resources. It's the largest exporter of petroleum and holds some of the world's most significant reserves. Let's delve into the top 10 oil and gas projects shaping Saudi Arabia's energy future in 2024.
Student information management system project report ii.pdfKamal Acharya
Our project explains about the student management. This project mainly explains the various actions related to student details. This project shows some ease in adding, editing and deleting the student details. It also provides a less time consuming process for viewing, adding, editing and deleting the marks of the students.
Industrial Training at Shahjalal Fertilizer Company Limited (SFCL)MdTanvirMahtab2
This presentation is about the working procedure of Shahjalal Fertilizer Company Limited (SFCL). A Govt. owned Company of Bangladesh Chemical Industries Corporation under Ministry of Industries.
2. Refrigerant
“ Refrigerant acts as a transportation
medium to move heat absorbed in the
evaporator to the condenser where it is
rejected ”.
3. Synthetic Refrigerants
1. CFC’s:-
Combination of
CARBON+CHLORINE+FLUORINE therefore
commonly know as FREONS.
High ODP=1 and High GWP.
CHLORINE has an excellent anti-wear
characteristic.
Few examples are: R-11, R-12, R-13 and etc.
