This document analyzes the thermal efficiency of biodiesel produced from Karanja, Jatropha, and Kusum oils in a compression ignition engine. It details the process of preparing biodiesel from each oil type through transesterification with methanol or ethanol. Experiments were conducted running blends of each biodiesel type with diesel in a single cylinder engine. The results showed that certain blends of Karanja, Jatropha, and Kusum biodiesel achieved higher thermal efficiency than diesel alone at various load conditions, with Jatropha biodiesel blends performing most efficiently at lower loads. Overall, the study found that non-edible oil feedstocks like Karanja, Jatro
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Yield and Net-return Comparison between Various Coconut Oil Expelling MethodsNadeeka Chandrathilaka
Yield comparison between different coconut oil expelling methods. Economical evaluation of the net return of different coconut oil expelling methods. Ranking different coconut oil expelling methods according to the expelled oil quality. Identify the consumption rate of different coconut oil expelling methods as food.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Solvent extraction, an innovative adaptation of existing crude oil refining technology, is being studied for its potential to upgrade used oils produced by small-scale oil treatment facilities. This report presents the design for a pilot-scale treatment plant using solvent extraction.
This report presents the design and the needed information for a pilot scale solvent treatment plant. Observations and discussion regarding the project and the design assumptions are presented along with the design.
We are manufacturer of neem oil extraction plant, neem oil mill plant, neem seed oil extraction machine, neem oil expeller machine, neem oil press machine, neem oil filter press machine. Contact us if you are looking to buy machines.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Yield and Net-return Comparison between Various Coconut Oil Expelling MethodsNadeeka Chandrathilaka
Yield comparison between different coconut oil expelling methods. Economical evaluation of the net return of different coconut oil expelling methods. Ranking different coconut oil expelling methods according to the expelled oil quality. Identify the consumption rate of different coconut oil expelling methods as food.
International Journal of Engineering and Science Invention (IJESI) is an international journal intended for professionals and researchers in all fields of computer science and electronics. IJESI publishes research articles and reviews within the whole field Engineering Science and Technology, new teaching methods, assessment, validation and the impact of new technologies and it will continue to provide information on the latest trends and developments in this ever-expanding subject. The publications of papers are selected through double peer reviewed to ensure originality, relevance, and readability. The articles published in our journal can be accessed online.
Solvent extraction, an innovative adaptation of existing crude oil refining technology, is being studied for its potential to upgrade used oils produced by small-scale oil treatment facilities. This report presents the design for a pilot-scale treatment plant using solvent extraction.
This report presents the design and the needed information for a pilot scale solvent treatment plant. Observations and discussion regarding the project and the design assumptions are presented along with the design.
We are manufacturer of neem oil extraction plant, neem oil mill plant, neem seed oil extraction machine, neem oil expeller machine, neem oil press machine, neem oil filter press machine. Contact us if you are looking to buy machines.
Pongamia Pinnata is the scientific name of Karanja. It is a medium sized tree that is plentily found alloverOdisha. There are a lot of research is going on regarding production of Biodiesel from Karanja oil but the main objective of the paper is the production and implementation of Glycerol from Karanja oil. Alcohol glycerol, a clear, colorless, viscous, sweet-tasting liquid belonging to the family of organic compounds; molecular formula HOCH2CHOHCH2OH. In this experiment we have produced Biodiesel as well as Glycerol as a byproduct but we have focused mainly on the formation of the Glycerol and its application. So in a different view point,if the production of value added glycerol can be increased within the same cost of biodiesel production, overall cost of biodiesel can be reduced to an optimum level. The effective utilization of crude glycerol will contribute to the viability of biodiesel. In this experiment, we have taken non edible Karanja oil for preparation of Glycerol by transesterification of crude oil with methanol in presence of NaOH/KOH as catalyst and yielded of approximately 11% (w/w) glycerol.
Title: ARACHIS OIL- Groundnut oil- Peanut oil
• Description: In this video the viewers will come to know about ARACHIS OIL that is one of the Lipid containing crude drugs obtained from the various plant sources. Arachis oil is obtained by expression of shelled and skinned seeds of Arachia hypogaea Linn., belonging to family Papilionaceae. This drug becomes important since it is obtained from nut source. Here the synonyms, biological sources (scientific names & Family), geographical sources (what are the countries where it can be collected), chemical constituents, identification tests and uses has been discussed in brief.
Portion explained:
1. Synonyms of ARACHIS OIL
2. Biological Sources of ARACHIS OIL
3. Geographical Sources of ARACHIS OIL
4. Preparation of ARACHIS OIL
5. Description of ARACHIS OIL
6. Chemical Constituents of ARACHIS OIL
7. Chemical Test of ARACHIS OIL
8. Uses of ARACHIS OIL
FOOD SAFETY ASPECTS IN EDIBLE OIL PROCESSINGjaisingh277
Edible oil seeds - coconut, mustard, niger, sunflower, safflower, soybean and groundnut processing, pretreatments, heat treatments and oil expelling has been discussed with emphasis on food safety.
Parboiling presentation by eshfaq bhattBhatt Eshfaq
Parboiling means, precooking of rice within the husk without disturbing its size and shape.
A hydrothermal treatment resulting partial cooking (gelatinization of starch) of paddy (rough rice).
The process consists of soaking rough rice in water until it is saturated, draining the excess water, and then steaming or otherwise heating the grain to gelatinize the starch
Vegetable oils, or vegetable fats, are oils extracted from seeds, or less often, from other parts of fruits. Like animal fats, vegetable fats are mixtures of triglycerides. Soybean oil, rapeseed oil, and cocoa butter are examples of fats from seeds.
Performance Characteristics of a Diesel Engine Fuelled with Biodiesel Produce...IOSR Journals
The demand for consumption of petroleum products increased with vehicles population.For
addressing the present problem we discussed alternate fuel. Moreover, the alternate fuel must be produced in
such a manner that it can be used directly in present engines without much engine modifications. Edible and
non-edible oils are the main source for alternate fuel. In this paper we have discussed the performance
characteristics of a diesel engine fuelled with mahua oil using additive. Due to high viscosity and low volatility
of non-edible oils their prolonged use is not advisable. These problems can be minimised by the
transesterification process which is a reaction of triglyceride and alcohol in presence of a catalyst to produce
mono alkyl ester which is known as biodiesel and glycerol .The biodiesel was blended with additive in various
proportions to prepare a number of test fuels which are tested on a diesel engine to studyvarious parameters
like carbon residue, fire point, flash point, viscosity, pour point, cloud point, cetane index etc. and compare
those with that of diesel . The result shows biodiesel with 10% additive (Dimethyl carbonate) is best suited for
diesel engine.
Pongamia Pinnata is the scientific name of Karanja. It is a medium sized tree that is plentily found alloverOdisha. There are a lot of research is going on regarding production of Biodiesel from Karanja oil but the main objective of the paper is the production and implementation of Glycerol from Karanja oil. Alcohol glycerol, a clear, colorless, viscous, sweet-tasting liquid belonging to the family of organic compounds; molecular formula HOCH2CHOHCH2OH. In this experiment we have produced Biodiesel as well as Glycerol as a byproduct but we have focused mainly on the formation of the Glycerol and its application. So in a different view point,if the production of value added glycerol can be increased within the same cost of biodiesel production, overall cost of biodiesel can be reduced to an optimum level. The effective utilization of crude glycerol will contribute to the viability of biodiesel. In this experiment, we have taken non edible Karanja oil for preparation of Glycerol by transesterification of crude oil with methanol in presence of NaOH/KOH as catalyst and yielded of approximately 11% (w/w) glycerol.
Title: ARACHIS OIL- Groundnut oil- Peanut oil
• Description: In this video the viewers will come to know about ARACHIS OIL that is one of the Lipid containing crude drugs obtained from the various plant sources. Arachis oil is obtained by expression of shelled and skinned seeds of Arachia hypogaea Linn., belonging to family Papilionaceae. This drug becomes important since it is obtained from nut source. Here the synonyms, biological sources (scientific names & Family), geographical sources (what are the countries where it can be collected), chemical constituents, identification tests and uses has been discussed in brief.
Portion explained:
1. Synonyms of ARACHIS OIL
2. Biological Sources of ARACHIS OIL
3. Geographical Sources of ARACHIS OIL
4. Preparation of ARACHIS OIL
5. Description of ARACHIS OIL
6. Chemical Constituents of ARACHIS OIL
7. Chemical Test of ARACHIS OIL
8. Uses of ARACHIS OIL
FOOD SAFETY ASPECTS IN EDIBLE OIL PROCESSINGjaisingh277
Edible oil seeds - coconut, mustard, niger, sunflower, safflower, soybean and groundnut processing, pretreatments, heat treatments and oil expelling has been discussed with emphasis on food safety.
Parboiling presentation by eshfaq bhattBhatt Eshfaq
Parboiling means, precooking of rice within the husk without disturbing its size and shape.
A hydrothermal treatment resulting partial cooking (gelatinization of starch) of paddy (rough rice).
The process consists of soaking rough rice in water until it is saturated, draining the excess water, and then steaming or otherwise heating the grain to gelatinize the starch
Vegetable oils, or vegetable fats, are oils extracted from seeds, or less often, from other parts of fruits. Like animal fats, vegetable fats are mixtures of triglycerides. Soybean oil, rapeseed oil, and cocoa butter are examples of fats from seeds.
Performance Characteristics of a Diesel Engine Fuelled with Biodiesel Produce...IOSR Journals
The demand for consumption of petroleum products increased with vehicles population.For
addressing the present problem we discussed alternate fuel. Moreover, the alternate fuel must be produced in
such a manner that it can be used directly in present engines without much engine modifications. Edible and
non-edible oils are the main source for alternate fuel. In this paper we have discussed the performance
characteristics of a diesel engine fuelled with mahua oil using additive. Due to high viscosity and low volatility
of non-edible oils their prolonged use is not advisable. These problems can be minimised by the
transesterification process which is a reaction of triglyceride and alcohol in presence of a catalyst to produce
mono alkyl ester which is known as biodiesel and glycerol .The biodiesel was blended with additive in various
proportions to prepare a number of test fuels which are tested on a diesel engine to studyvarious parameters
like carbon residue, fire point, flash point, viscosity, pour point, cloud point, cetane index etc. and compare
those with that of diesel . The result shows biodiesel with 10% additive (Dimethyl carbonate) is best suited for
diesel engine.
Experimental Investigation on Use of Methyl Ester Kusum Oil and Its Blends In...IOSR Journals
The research on alternative fuels for compression ignition engine has become essential due to depletion of petroleum products, higher oil prices and its major contribution for pollutants, where vegetable oil promises best alternative fuel. Vegetable oils, due to their agricultural origin, are able to reduce net CO2 emissions to the atmosphere. In the present paper, the research efforts directed towards improving the performance of C.I. engine using vegetable oil (Methyl ester kusum oil) as a fuel. The paper deals with results of performance of a single cylinder, four stroke, C.I. engine using kusum oil methyl ester and its blends with diesel. The performance of engine was studied at constant speed, with the engine operated at various loading conditions. Performance parameters considered for comparing are brake specific fuel consumption, thermal efficiency, brake power, exhaust gas temperature, smoke density and part load and peak load performance of the engine. The engine offers increase in thermal efficiency when it is powered by kusum oil and its blends at various loads. The power developed and exhausts gas temperature increases with the increase and specific fuel consumption is higher than diesel fuel
IJERA (International journal of Engineering Research and Applications) is International online, ... peer reviewed journal. For more detail or submit your article, please visit www.ijera.com
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Effect of Oil Extraction Method on the Functional Properties of Biodiesels of...ijtsrd
Owing to the rise in demand for petroleum and environmental concerns, the search for alternative fuels has gained prominence. This study examined the effect of the method of extraction of the base oil on the functional properties of biodiesel produced from Jatropha, Yellow oleander and Castor oilseeds. The study revealed that the method of extraction had significant effect on the properties of the oil extracted and hence the biodiesel produced from the oil. Hydrogenation during oven heating after solvent extraction affected the unsaturation of the base oils and the biodiesels produced from them. The kinematic viscosities of the biodiesel samples obtained from the oil samples extracted by solvent extraction were generally higher than those obtained from the oil samples extracted by mechanical extraction. The flash and fire points of the biodiesel samples obtained from the oil samples extracted by solvent extraction were higher than that obtained from the oil samples extracted by mechanical extraction. The pour points of the biodiesels produced from the oils extracted by mechanical extraction were lower than those produced from the oils extracted by solvent extraction. Gbashi M. Samuel | Yanshio T. Emmauel | Kingsley N. Nwankwo "Effect of Oil Extraction Method on the Functional Properties of Biodiesels of Selected Oilseeds" Published in International Journal of Trend in Scientific Research and Development (ijtsrd), ISSN: 2456-6470, Volume-3 | Issue-6 , October 2019, URL: https://www.ijtsrd.com/papers/ijtsrd25252.pdf Paper URL: https://www.ijtsrd.com/engineering/mechanical-engineering/25252/effect-of-oil-extraction-method-on-the-functional-properties-of-biodiesels-of-selected-oilseeds/gbashi-m-samuel
Characterization of biodiesel produced by meth butanolysis of castor oileSAT Journals
Abstract Crude Castor oil was transesterified using methanol, mixtures of methanol and butanol in molar percentages and potassium hydroxide as catalyst. The optimum reaction conditions, based on the percentage yield of biodiesel, were 45 mins reaction time at 650C and 1.5w/w% catalyst. The alcohol/oil ratio and agitation rate were both held constant at 12:1 and 450rpm respectively throughout the process. The yield of biodiesel from castor oil at such optimum reaction conditions were 87.1%, 85.7 % and 81.7 for 100%, 95% and 90% methanol-butanol molar blends respectively. . The specific gravities at 150C were 0.898 and 0.902ml/g, kinematic viscosities at 400C varied from 6.4 to 7.8 cSt. The calorific values were between 10690 and 10708 cal/g and the flash points were found to be within the range 144 to 1500C. The standard specifications for biodiesel (ASTM D67651) show that the specific gravity, flash point and calorific value requirements were satisfied. The higher viscosity (above 6.0 cSt.) can be controlled by the use of additives. Alternatively, blending with petroleum diesel will lead to improvement of the flow properties of the biodiesel fuel. Keywords: Transesterification, Castor oil, methanol/butanol molar blend, Biodiesel yield.
International Journal of Engineering Research and Applications (IJERA) is an open access online peer reviewed international journal that publishes research and review articles in the fields of Computer Science, Neural Networks, Electrical Engineering, Software Engineering, Information Technology, Mechanical Engineering, Chemical Engineering, Plastic Engineering, Food Technology, Textile Engineering, Nano Technology & science, Power Electronics, Electronics & Communication Engineering, Computational mathematics, Image processing, Civil Engineering, Structural Engineering, Environmental Engineering, VLSI Testing & Low Power VLSI Design etc.
Welcome to International Journal of Engineering Research and Development (IJERD)IJERD Editor
journal publishing, how to publish research paper, Call For research paper, international journal, publishing a paper, IJERD, journal of science and technology, how to get a research paper published, publishing a paper, publishing of journal, publishing of research paper, reserach and review articles, IJERD Journal, How to publish your research paper, publish research paper, open access engineering journal, Engineering journal, Mathemetics journal, Physics journal, Chemistry journal, Computer Engineering, Computer Science journal, how to submit your paper, peer reviw journal, indexed journal, reserach and review articles, engineering journal, www.ijerd.com, research journals,
yahoo journals, bing journals, International Journal of Engineering Research and Development, google journals, hard copy of journal
Similar to Analysis of Thermal Efficiency of Bio Ethyl Ester of Karanja, Jatropha and Kusum in Compression Ignition Engine (20)
Explore the innovative world of trenchless pipe repair with our comprehensive guide, "The Benefits and Techniques of Trenchless Pipe Repair." This document delves into the modern methods of repairing underground pipes without the need for extensive excavation, highlighting the numerous advantages and the latest techniques used in the industry.
Learn about the cost savings, reduced environmental impact, and minimal disruption associated with trenchless technology. Discover detailed explanations of popular techniques such as pipe bursting, cured-in-place pipe (CIPP) lining, and directional drilling. Understand how these methods can be applied to various types of infrastructure, from residential plumbing to large-scale municipal systems.
Ideal for homeowners, contractors, engineers, and anyone interested in modern plumbing solutions, this guide provides valuable insights into why trenchless pipe repair is becoming the preferred choice for pipe rehabilitation. Stay informed about the latest advancements and best practices in the field.
Water scarcity is the lack of fresh water resources to meet the standard water demand. There are two type of water scarcity. One is physical. The other is economic water scarcity.
Immunizing Image Classifiers Against Localized Adversary Attacksgerogepatton
This paper addresses the vulnerability of deep learning models, particularly convolutional neural networks
(CNN)s, to adversarial attacks and presents a proactive training technique designed to counter them. We
introduce a novel volumization algorithm, which transforms 2D images into 3D volumetric representations.
When combined with 3D convolution and deep curriculum learning optimization (CLO), itsignificantly improves
the immunity of models against localized universal attacks by up to 40%. We evaluate our proposed approach
using contemporary CNN architectures and the modified Canadian Institute for Advanced Research (CIFAR-10
and CIFAR-100) and ImageNet Large Scale Visual Recognition Challenge (ILSVRC12) datasets, showcasing
accuracy improvements over previous techniques. The results indicate that the combination of the volumetric
input and curriculum learning holds significant promise for mitigating adversarial attacks without necessitating
adversary training.
Sachpazis:Terzaghi Bearing Capacity Estimation in simple terms with Calculati...Dr.Costas Sachpazis
Terzaghi's soil bearing capacity theory, developed by Karl Terzaghi, is a fundamental principle in geotechnical engineering used to determine the bearing capacity of shallow foundations. This theory provides a method to calculate the ultimate bearing capacity of soil, which is the maximum load per unit area that the soil can support without undergoing shear failure. The Calculation HTML Code included.
Cosmetic shop management system project report.pdfKamal Acharya
Buying new cosmetic products is difficult. It can even be scary for those who have sensitive skin and are prone to skin trouble. The information needed to alleviate this problem is on the back of each product, but it's thought to interpret those ingredient lists unless you have a background in chemistry.
Instead of buying and hoping for the best, we can use data science to help us predict which products may be good fits for us. It includes various function programs to do the above mentioned tasks.
Data file handling has been effectively used in the program.
The automated cosmetic shop management system should deal with the automation of general workflow and administration process of the shop. The main processes of the system focus on customer's request where the system is able to search the most appropriate products and deliver it to the customers. It should help the employees to quickly identify the list of cosmetic product that have reached the minimum quantity and also keep a track of expired date for each cosmetic product. It should help the employees to find the rack number in which the product is placed.It is also Faster and more efficient way.
Overview of the fundamental roles in Hydropower generation and the components involved in wider Electrical Engineering.
This paper presents the design and construction of hydroelectric dams from the hydrologist’s survey of the valley before construction, all aspects and involved disciplines, fluid dynamics, structural engineering, generation and mains frequency regulation to the very transmission of power through the network in the United Kingdom.
Author: Robbie Edward Sayers
Collaborators and co editors: Charlie Sims and Connor Healey.
(C) 2024 Robbie E. Sayers
Hierarchical Digital Twin of a Naval Power SystemKerry Sado
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.