This document provides an overview of aircraft landing gear systems. It describes the main components, including the types of landing gear arrangements (tail wheel, tandem, tricycle), construction details, alignment and retraction mechanisms, nose wheel steering, braking systems, tires, and antiskid systems. The purpose of landing gear is to support the aircraft during landing and taxiing. Retractable gear stows in the fuselage or wings to reduce drag while flying. Nose wheel steering and braking systems provide directional control on the ground. Aircraft tires must withstand high loads and provide traction for takeoff and landing. Antiskid systems help maintain braking effectiveness.
Abstract:
Landing gear is one of the critical subsystems of an aircraft. The need to design landing gear with minimum weight, minimum volume, high performance, improved life and reduced life cycle cost have posed many challenges to landing gear designers and practitioners. Further it is essential to reduce the landing gear design and development cycle time while meeting all the regulatory and safety requirements. Many technologies have been developed over the years to meet these challenges in design and development of landing gear. This paper presents a perspective on various stages of landing gear design and development, current technology landscape and how these technologies are helping us to meet the challenges involved in the development of landing gear and how they are going to evolve in future.
NAME : S. Srinivasa Phani Kumar
Branch : MECHANICAL
College : SWARNANDHRA COLLEGE OF ENGINEERING & TECHNOLOGY
THIS PRESENTATION TAKES OVERVIEW OF AIRCRAFT CABIN PRESSURIZATION SYSTEM. IN THIS I EXPLAINED BASIC SYSTEM USED FOR PRESSURIZATION , AND HOW THIS SYSTEM IS SAFE, PRECISE. AND HOW AIR IS KEPT HEALTHY.
Aircraft Air Conditioning And Pressurisation SystemCahit Kutay Uysal
At this presentation, I try to explain aircraft pressurization systems and air conditioning systems. I hope it will be useful source to understand aircraft systems easily.
Abstract:
Landing gear is one of the critical subsystems of an aircraft. The need to design landing gear with minimum weight, minimum volume, high performance, improved life and reduced life cycle cost have posed many challenges to landing gear designers and practitioners. Further it is essential to reduce the landing gear design and development cycle time while meeting all the regulatory and safety requirements. Many technologies have been developed over the years to meet these challenges in design and development of landing gear. This paper presents a perspective on various stages of landing gear design and development, current technology landscape and how these technologies are helping us to meet the challenges involved in the development of landing gear and how they are going to evolve in future.
NAME : S. Srinivasa Phani Kumar
Branch : MECHANICAL
College : SWARNANDHRA COLLEGE OF ENGINEERING & TECHNOLOGY
THIS PRESENTATION TAKES OVERVIEW OF AIRCRAFT CABIN PRESSURIZATION SYSTEM. IN THIS I EXPLAINED BASIC SYSTEM USED FOR PRESSURIZATION , AND HOW THIS SYSTEM IS SAFE, PRECISE. AND HOW AIR IS KEPT HEALTHY.
Aircraft Air Conditioning And Pressurisation SystemCahit Kutay Uysal
At this presentation, I try to explain aircraft pressurization systems and air conditioning systems. I hope it will be useful source to understand aircraft systems easily.
This project gives an understanding on how an Aircraft is protected from Icy conditions during flight and while on ground. Hence also the systems and devices and fluid used.
The presentation details the outline, working and parts of thermal power plants. The thermodynamic cycle is also expalined in deatail. For more presentations and reports visit www.mechieprojects.com
This presentation is for mechanical engineering/ civil engineering students to help them understand the different type of destructive mechanical testing of materials. The tensile testing, hardness, impact test procedures are explained in detail.
Unit 7-gear trains, Kinematics of machines of VTU Syllabus prepared by Hareesha N Gowda, Asst. Prof, Dayananda Sagar College of Engg, Blore. Please write to hareeshang@gmail.com for suggestions and criticisms.
Tactair Landing Gear/Door Control valves feature a 4-Way, 3-Position design which has proven reliability and robustness. One valve can control a landing gear system or multiple valves can be incorporated into a system for separate nose landing gear, main landing gear, and landing gear door control. All Tactair spool and sleeve valves feature a hardened spool and sleeve assembly which is highly resistant to wear and provides longevity. Solenoids can be either single or dual coil design and all incorporate reverse-recovery diodes for electrical protection.
This is Mechanical project report on Fabrication of an Active Air Suspension System. Air ride suspension
carries the load on each axle with a pressurized air bag just as a high pressure balloon. This system provides
the smoothest and most shock free ride of any of the known vehicle suspension system. An air suspension
includes a multiple air spring assemblies that each includes a piston airbag and a primary airbag mounted over
the piston airbag. The main and piston air bags each have a variable volume that is controlled independently
of the other for active suspension control.
Software Delivery At the Speed of AI: Inflectra Invests In AI-Powered QualityInflectra
In this insightful webinar, Inflectra explores how artificial intelligence (AI) is transforming software development and testing. Discover how AI-powered tools are revolutionizing every stage of the software development lifecycle (SDLC), from design and prototyping to testing, deployment, and monitoring.
Learn about:
• The Future of Testing: How AI is shifting testing towards verification, analysis, and higher-level skills, while reducing repetitive tasks.
• Test Automation: How AI-powered test case generation, optimization, and self-healing tests are making testing more efficient and effective.
• Visual Testing: Explore the emerging capabilities of AI in visual testing and how it's set to revolutionize UI verification.
• Inflectra's AI Solutions: See demonstrations of Inflectra's cutting-edge AI tools like the ChatGPT plugin and Azure Open AI platform, designed to streamline your testing process.
Whether you're a developer, tester, or QA professional, this webinar will give you valuable insights into how AI is shaping the future of software delivery.
Slack (or Teams) Automation for Bonterra Impact Management (fka Social Soluti...Jeffrey Haguewood
Sidekick Solutions uses Bonterra Impact Management (fka Social Solutions Apricot) and automation solutions to integrate data for business workflows.
We believe integration and automation are essential to user experience and the promise of efficient work through technology. Automation is the critical ingredient to realizing that full vision. We develop integration products and services for Bonterra Case Management software to support the deployment of automations for a variety of use cases.
This video focuses on the notifications, alerts, and approval requests using Slack for Bonterra Impact Management. The solutions covered in this webinar can also be deployed for Microsoft Teams.
Interested in deploying notification automations for Bonterra Impact Management? Contact us at sales@sidekicksolutionsllc.com to discuss next steps.
GDG Cloud Southlake #33: Boule & Rebala: Effective AppSec in SDLC using Deplo...James Anderson
Effective Application Security in Software Delivery lifecycle using Deployment Firewall and DBOM
The modern software delivery process (or the CI/CD process) includes many tools, distributed teams, open-source code, and cloud platforms. Constant focus on speed to release software to market, along with the traditional slow and manual security checks has caused gaps in continuous security as an important piece in the software supply chain. Today organizations feel more susceptible to external and internal cyber threats due to the vast attack surface in their applications supply chain and the lack of end-to-end governance and risk management.
The software team must secure its software delivery process to avoid vulnerability and security breaches. This needs to be achieved with existing tool chains and without extensive rework of the delivery processes. This talk will present strategies and techniques for providing visibility into the true risk of the existing vulnerabilities, preventing the introduction of security issues in the software, resolving vulnerabilities in production environments quickly, and capturing the deployment bill of materials (DBOM).
Speakers:
Bob Boule
Robert Boule is a technology enthusiast with PASSION for technology and making things work along with a knack for helping others understand how things work. He comes with around 20 years of solution engineering experience in application security, software continuous delivery, and SaaS platforms. He is known for his dynamic presentations in CI/CD and application security integrated in software delivery lifecycle.
Gopinath Rebala
Gopinath Rebala is the CTO of OpsMx, where he has overall responsibility for the machine learning and data processing architectures for Secure Software Delivery. Gopi also has a strong connection with our customers, leading design and architecture for strategic implementations. Gopi is a frequent speaker and well-known leader in continuous delivery and integrating security into software delivery.
Encryption in Microsoft 365 - ExpertsLive Netherlands 2024Albert Hoitingh
In this session I delve into the encryption technology used in Microsoft 365 and Microsoft Purview. Including the concepts of Customer Key and Double Key Encryption.
Elevating Tactical DDD Patterns Through Object CalisthenicsDorra BARTAGUIZ
After immersing yourself in the blue book and its red counterpart, attending DDD-focused conferences, and applying tactical patterns, you're left with a crucial question: How do I ensure my design is effective? Tactical patterns within Domain-Driven Design (DDD) serve as guiding principles for creating clear and manageable domain models. However, achieving success with these patterns requires additional guidance. Interestingly, we've observed that a set of constraints initially designed for training purposes remarkably aligns with effective pattern implementation, offering a more ‘mechanical’ approach. Let's explore together how Object Calisthenics can elevate the design of your tactical DDD patterns, offering concrete help for those venturing into DDD for the first time!
The Art of the Pitch: WordPress Relationships and SalesLaura Byrne
Clients don’t know what they don’t know. What web solutions are right for them? How does WordPress come into the picture? How do you make sure you understand scope and timeline? What do you do if sometime changes?
All these questions and more will be explored as we talk about matching clients’ needs with what your agency offers without pulling teeth or pulling your hair out. Practical tips, and strategies for successful relationship building that leads to closing the deal.
Transcript: Selling digital books in 2024: Insights from industry leaders - T...BookNet Canada
The publishing industry has been selling digital audiobooks and ebooks for over a decade and has found its groove. What’s changed? What has stayed the same? Where do we go from here? Join a group of leading sales peers from across the industry for a conversation about the lessons learned since the popularization of digital books, best practices, digital book supply chain management, and more.
Link to video recording: https://bnctechforum.ca/sessions/selling-digital-books-in-2024-insights-from-industry-leaders/
Presented by BookNet Canada on May 28, 2024, with support from the Department of Canadian Heritage.
UiPath Test Automation using UiPath Test Suite series, part 4DianaGray10
Welcome to UiPath Test Automation using UiPath Test Suite series part 4. In this session, we will cover Test Manager overview along with SAP heatmap.
The UiPath Test Manager overview with SAP heatmap webinar offers a concise yet comprehensive exploration of the role of a Test Manager within SAP environments, coupled with the utilization of heatmaps for effective testing strategies.
Participants will gain insights into the responsibilities, challenges, and best practices associated with test management in SAP projects. Additionally, the webinar delves into the significance of heatmaps as a visual aid for identifying testing priorities, areas of risk, and resource allocation within SAP landscapes. Through this session, attendees can expect to enhance their understanding of test management principles while learning practical approaches to optimize testing processes in SAP environments using heatmap visualization techniques
What will you get from this session?
1. Insights into SAP testing best practices
2. Heatmap utilization for testing
3. Optimization of testing processes
4. Demo
Topics covered:
Execution from the test manager
Orchestrator execution result
Defect reporting
SAP heatmap example with demo
Speaker:
Deepak Rai, Automation Practice Lead, Boundaryless Group and UiPath MVP
Securing your Kubernetes cluster_ a step-by-step guide to success !KatiaHIMEUR1
Today, after several years of existence, an extremely active community and an ultra-dynamic ecosystem, Kubernetes has established itself as the de facto standard in container orchestration. Thanks to a wide range of managed services, it has never been so easy to set up a ready-to-use Kubernetes cluster.
However, this ease of use means that the subject of security in Kubernetes is often left for later, or even neglected. This exposes companies to significant risks.
In this talk, I'll show you step-by-step how to secure your Kubernetes cluster for greater peace of mind and reliability.
2. Contents
1.
2.
3.
4.
5.
6.
7.
8.
9.
10.
Introduction
Types of landing Gear Arrangement
Construction
Parts of System
Landing gear alignment support and retraction
Landing gear system working
Nose wheel steering system
Aircrafts Braking system
Tire and its construction
Antiskid system
3. INTRODUCTION
Aircraft landing gear supports the entire weight of an
aircraft during landing and ground operations.
They are attached to primary structural members of the
aircraft.
For snow it will be skis type
For water it may of pontoon type
For ground and water An amphibious aircraft with
retractable wheels
4.
5. TYPES OF LANDING GEAR
ARRANGEMENT
A. Tail wheel type (Conventional)
B. Tandem loading gear (longitudinally Aligned)
C. Tricycle type landing gear
6. Fixed Landing Gear- A gear is attached to the airframe and
remains exposed to the slip stream as the air craft is flown.
Retraction Type – Stowed in fuselage or wing compartments
while in flight . As speed of aircraft increases the drag caused by
the landing gear becomes
Greater and a means to retract the gear to eliminate parasite drag is
required. D:desktopretractable landing gear.mp4
Shock Absorbing-The shock energy is altered and transferred
throughout the airframe at a different rate and time than the single
strong pulse of impact.
Non Shock Absorbing- The shock is absorbed by converting the
energy into heat energy.
8. Typical Landing Gear Arrangement
It consists of an upper and lower
link hinged at the centre that
permits the brace to jackknif0e
during retraction of the gear.
The upper end pivots on a
trunnion attached to structure in
the wheel well overhead.
The lower end is attached to the
shock strut.
9. A locking link is incorporated between the upper end of
the shock strut and the lower drag link.
This locks the gear securely in the down position to
prevent collapse of the gear.
To adjust the over-centre position of the side brace locking
link, the aircraft must be placed on jacks.
With the landing gear in the down position, the lock link
end fitting is adjusted so that the side brace links are held
firmly over - centre.
10. Landing Gear Alignment ,Support and
Retraction
Components of a LGS ,Typically these are the torque links,
trunion and bracket arrangements, drag strut linkages,
electrical and hydraulic gear retraction devices, as well as
locking, sensing, and indicating components.
11. Alignment
This is set by the manufacturer and only requires occasional
attention such as after a hard landing.
The aircraft’s main wheels must be inspected and adjusted, if
necessary, to maintain the proper tow-in or tow-out and the
correct camber.
Tow-in and tow-out refer to the path a main wheel would
take in relation to the airframe longitudinal axis or centreline if
the wheel was free to roll forward. Three possibilities exist. The
wheel would roll either:
12. Wheel alignment on an aircraft
a) Parallel to the longitudinal axis (aligned)
b) Converge on the longitudinal axis (towin)
c) Veer away from the longitudinal axis
(tow-out)
13. Support
Aircraft landing gear are attached to the wing spars or other
structural members.
Retractable gear must be engineered in such a way as to
provide strong attachment to the aircraft and still be able to
move into a recess or well when stowed. The trunion is a fixed
structural extension of the upper strut cylinder with bearing
surfaces that allow the entire gear assembly to move.
14. Retraction Systems
The simplest contains a lever in the flight deck mechanically
linked to the gear. Through mechanical advantage, the pilot
extends and retracts the landing gear by operating the lever. Use
of a roller chain, sprockets, and a hand crank to decrease the
required force.
To decrease drag in flight
some undercarriages retract
into the wings and/or fuselage
with wheels flush against the
surface or concealed behind
doors; this is called retractable
gear.
15. If the wheels rest protruding and partially exposed to the
air stream after being retracted, the system is called semi
retractable.
Most retraction systems are hydraulically-operated,
though some are electrically-operated or even manuallyoperated
The trunnion is a fixed structural support that is part
of or attached to the upper strut cylinder of a landing gear
strut. It contains bearing surfaces so the gear can retract
18. Emergency Extension System
The emergency extension system lowers the landing gear
if the main power system fails.
Some aircraft have an emergency release handle in the
flight deck that is connected through a mechanical
linkage to the gear up locks.
When the handle is operated, it releases the up locks
and allows the gear to free-fall to the extended position
under the force created by gravity acting upon the gear.
Other aircraft use a non-mechanical back-up, such as
pneumatic power, to unlatch the gear.
Landing gear selector panels with position
indicator lights. The Boeing 737 panel illuminates
red lights above the green lights when the gear is
in transit.
19. Nose Wheel Steering Systems
The nose wheel on most aircraft is steerable from the flight
deck via a nose wheel steering system. This allows the aircraft
to be directed during ground operation.
Small Aircraft- Most small aircraft have steering
capabilities through the use of a simple system of
mechanical linkages connected to the rudder pedals. Pushpull tubes are connected to pedal horns on the lower strut
cylinder. As the pedals are depressed, the movement is
transferred to the strut piston axle and wheel assembly
which rotates to the left or right
20. Large Aircraft
Due to their mass and the need for positive control, large
aircraft utilize a power source for nose wheel steering.
Hydraulic power predominates.
Control of the steering is from the flight deck through
the use of a small wheel, tiller, or joystick typically mounted
on the left side wall.
It directs hydraulic fluid under pressure to one or two
actuators designed with various linkages to rotate the lower
strut.
An accumulator and relief valve, or similar pressurizing
assembly, keeps fluid in the actuators and system under
pressure at all times. This permits the steering actuating
cylinders to also act as shimmy dampers. A follow-up
mechanism consists of various gears, cables, rods, drums,
and/or bell-crank, etc.
23. Air Craft Brakes
The brakes slow the aircraft and stop it in a reasonable amount
of time. They hold the aircraft stationary during engine run-up
and, in many cases, steer the aircraft during taxi.
On most aircraft, each of the main wheels is equipped with a
brake unit.
The nose wheel may have or may not have a brake. In the
typical brake system, mechanical and/or hydraulic linkages to the
rudder pedals allow the pilot to control the brakes.
Brakes principle is the conversion of kinetic energy of motion
into heat energy through the creation of friction.
24.
25. Types of Brakes
1. Single Disc Brakes or
Floating Disc Brakes
1. Dual Disc Brake
2. Segment Rotor Disc Brakes
3. Carbon Disc Brakes
4. Expander Tube Disc brakes
5. Boosted brakes
6. Power Brakes
A cross-sectional view of a Goodyear single-disc
brake calliper illustrates the adjusting pin
assembly that doubles as a wear indicator.
26. The orientation of components in a basic power brake system is shown in A.
The general layout of an airliner power brake system is shown in B.
27. AIRCRAFT TIRES
PURPOSES:
Aircraft tires are either tubeless or tube type, provide a
cushion of air that helps absorb the shocks and
roughness of landings and takeoffs.
They support the weight of the aircraft while on the
ground and provide the necessary traction for braking
and stopping aircraft on landing.
Aircraft tires undergoes a variety of static and dynamic
stresses dependably in a wide range of operating
conditions.
28. Aircraft tires are one of the strongest and toughest pneumatic
tires made.
It must withstand high speeds and heavy static and dynamic
loads. E.g the main gear tires of a four engine jet transport are
required to withstand landing speeds up to 250 mph, as well as
static and dynamic loads as high as 22 and 33 tons respectively.
The various parts of aircraft tires are: tread, tread reinforcement,
breakers, casing piles/cord body, beads, flippers, chafers, bead
toe, bead heel, inner liner, tread reinforcement ply, sidewall and
apex strip.
29. Types of Tires
A common classification of aircraft tires is by type as classified
by the United States Tire and Rim Association.
While there are nine types of tires, only Types I, III, VII, and
VIII, also known as a Three-Part Nomenclature tires, are still in
production.
30. Type III aircraft tires are identified via a two-number
system with a (-) separating the numbers. The first
number is the tire section width in inches. The second
number is the rim diameter in inches. For example: 6.00 –
6 is a Cessna 172 tire that is 6.00 inches wide and fits on a
rim that has a diameter of 6 inches.
Type VII tires are high performance tires found on jet
aircraft.
They are inflated to high-pressure and have exceptional
high load carrying capability. Identification of Type VII
aircraft tires involves a two-number system. The first
number designates the nominal overall diameter of the
tire. The second number designates the section width.
31. Type VIII- tire, dimensions may be
represented in inches or in
millimetres. Bias tires follow the
designation nomenclature and radial
tires replace the “–” with the letter R.
For example, 30 X 8.8 R15 designates a
Type VIII radial aircraft tire with a 30inch tire diameter, an 8.8-inch
section width to be mounted on a 15inch wheel rim.
32. ANTISKID SYSTEM
Antiskid system is a feature found in high performance
aircraft braking system. It is important because if a wheel
goes into skid, its braking value is greatly reduced.
The skid control system performs four functions: i) normal
skid control, ii) locked wheel skid control, iii) touchdown
protection and iv) fail-safe protection.
33. Normal Skid Control
It comes into play when wheel rotation slows down
but has not come to a stop.
When this slowing down happens, the wheel sliding
action has just begun and not reached a full scale slide.
In this situation the skid control valve removes some of
the hydraulic pressure to the wheel, which permits the
wheel to rotate a little faster and stop its sliding.
The skid detection and control of each wheel is
completely independent of the others.
34. Locked Wheel Skid Control
It causes the break to be fully released when its
wheel locks.
It will occur if the normal skid control does not
prevent the wheel from reaching a full skid.
To relieve the locked wheel skid, the pressure is bled
off longer than in normal skid function. This is to give
the wheel time to regain speed.
35. Touchdown Protection
The touchdown protection circuit prevents the brakes
from being applied during the landing approach even if the
brake pedals are depressed.
This prevents the wheels from being locked when they
contact the runway.
Two conditions must exist before the skid control valves
permit brake application:
i) The squat switch must signal that the weight of the
aircraft is on the wheels.
ii) The wheel generators sense a wheel speed over 15-20
mph.
36. Fail-safe Protection
The fail-safe protection circuit monitors operation of the
skid control system. It automatically returns the brake
system to full manual in case of system failure. It also turns
on a warning light.
37.
38. Reference
John Anderson, Introduction to Flight, McGrawHill, New York, Sixth Edition.
Wikipedia.org
Michael Carley, m.j.carley@bath.ac.uk,