260118 chapter 6 fluid dynamics
•
3 likes•3,023 views
This document discusses fluid dynamics and Bernoulli's equation. It introduces fluid dynamics as the study of fluid motion and forces causing flow. Bernoulli's equation relates pressure, velocity, and elevation in fluid flow. It assumes the fluid is ideal, incompressible, and flow is steady and irrotational. While useful, the equation assumes no viscosity, but real fluids are viscous. Applications of Bernoulli's equation include venturimeters, orifice meters, and piezometers to measure fluid flow.
Report
Share
Report
Share
Download to read offline
Recommended
FLUID MECHANICS
This document defines fluids and their properties. It discusses the differences between solids and fluids, and defines the various states of matter. Fluids are classified as ideal fluids, real fluids, Newtonian fluids, and non-Newtonian fluids. The key properties of fluids discussed include density, specific weight, viscosity, vapor pressure, and surface tension. Concepts such as bulk modulus, compressibility, and capillarity are also introduced. Various fluid flow measurement devices that utilize Bernoulli's equation are briefly mentioned.
Types of fluid flow best ppt
A fluid is a state of matter in which its molecules move freely and do not bear a constant relationship in space to other molecules.
In physics, fluid flow has all kinds of aspects: steady or unsteady, compressible or incompressible, viscous or non-viscous, and rotational or irrotational to name a few. Some of these characteristics reflect properties of the liquid itself, and others focus on how the fluid is moving.
Fluids are :-
Liquid : blood, i.v. infusions)
Gas : O2 , N2O)
Vapour (transition from liquid to gas) : N2O (under compression in cylinder), volatile inhalational agents (halothane, isoflurane, etc)
Sublimate (transition from solid to gas bypassing liquid state) : Dry ice (solid CO2), iodine
Chapter 1. introduction to fluid mechanics
This document provides an introduction to fluid mechanics. It begins with definitions of mechanics, statics, dynamics, and fluid mechanics. It then discusses different categories of fluid mechanics including fluid statics, fluid kinematics, fluid dynamics, hydrodynamics, hydraulics, gas dynamics, and aerodynamics. The document also defines what a fluid is, discusses the properties of fluids including density, specific weight, specific volume, and specific gravity. It concludes by explaining viscosity, kinematic viscosity, and Newton's law of viscosity.
Fluid kinematics and dynamics
This document discusses key concepts in fluid kinematics and dynamics. It defines streamlines, pathlines, and streaklines as field lines that describe the motion of fluid particles. Streamlines show instantaneous velocity, pathlines show trajectories over time, and streaklines show where particles have passed. The document also classifies fluid flows as steady or unsteady, uniform or non-uniform, laminar or turbulent, rotational or irrotational, and one, two, or three-dimensional. Finally, it discusses momentum equations and their application to forces on pipe bends, as well as Bernoulli's theorem.
Fluid statics
This document discusses fluid statics and pressure measurement. It defines concepts like absolute pressure, gauge pressure, atmospheric pressure, and Pascal's law. It describes devices used to measure pressure like manometers, piezometers, and Bourdon gauges. Specifically, it provides details on how liquid manometers and differential manometers work, including the principles, setup, and equations to calculate pressure. It also lists the advantages and limitations of using manometers for pressure measurement applications.
Kinematics of fluid flow & it’s application.
This document provides an overview of fluid kinematics. It defines fluid kinematics as the study of fluid motion without considering pressure forces. It describes Lagrangian and Eulerian methods for analyzing fluid flow, and defines different types of flows including steady/unsteady, uniform/non-uniform, laminar/turbulent, compressible/incompressible, rotational/irrotational, and one-dimensional/two-dimensional/three-dimensional flows. It also discusses flow visualization techniques like streamlines, pathlines, and streaklines.
Fluid mechanics lectur notes
This document contains lecture notes on fluid mechanics. It begins with an introduction to fluid mechanics, including definitions of key terms like fluid, continuum, density, and viscosity. It then covers topics in fluid statics like pressure, hydrostatic force, and buoyancy. Later sections discuss the description and analysis of fluid motion using concepts like the control volume, streamlines, and conservation equations. The document aims to explain the physics of fluid motion to undergraduate students through examples and without advanced mathematics.
Recommended
FLUID MECHANICS
This document defines fluids and their properties. It discusses the differences between solids and fluids, and defines the various states of matter. Fluids are classified as ideal fluids, real fluids, Newtonian fluids, and non-Newtonian fluids. The key properties of fluids discussed include density, specific weight, viscosity, vapor pressure, and surface tension. Concepts such as bulk modulus, compressibility, and capillarity are also introduced. Various fluid flow measurement devices that utilize Bernoulli's equation are briefly mentioned.
Types of fluid flow best ppt
A fluid is a state of matter in which its molecules move freely and do not bear a constant relationship in space to other molecules.
In physics, fluid flow has all kinds of aspects: steady or unsteady, compressible or incompressible, viscous or non-viscous, and rotational or irrotational to name a few. Some of these characteristics reflect properties of the liquid itself, and others focus on how the fluid is moving.
Fluids are :-
Liquid : blood, i.v. infusions)
Gas : O2 , N2O)
Vapour (transition from liquid to gas) : N2O (under compression in cylinder), volatile inhalational agents (halothane, isoflurane, etc)
Sublimate (transition from solid to gas bypassing liquid state) : Dry ice (solid CO2), iodine
Chapter 1. introduction to fluid mechanics
This document provides an introduction to fluid mechanics. It begins with definitions of mechanics, statics, dynamics, and fluid mechanics. It then discusses different categories of fluid mechanics including fluid statics, fluid kinematics, fluid dynamics, hydrodynamics, hydraulics, gas dynamics, and aerodynamics. The document also defines what a fluid is, discusses the properties of fluids including density, specific weight, specific volume, and specific gravity. It concludes by explaining viscosity, kinematic viscosity, and Newton's law of viscosity.
Fluid kinematics and dynamics
This document discusses key concepts in fluid kinematics and dynamics. It defines streamlines, pathlines, and streaklines as field lines that describe the motion of fluid particles. Streamlines show instantaneous velocity, pathlines show trajectories over time, and streaklines show where particles have passed. The document also classifies fluid flows as steady or unsteady, uniform or non-uniform, laminar or turbulent, rotational or irrotational, and one, two, or three-dimensional. Finally, it discusses momentum equations and their application to forces on pipe bends, as well as Bernoulli's theorem.
Fluid statics
This document discusses fluid statics and pressure measurement. It defines concepts like absolute pressure, gauge pressure, atmospheric pressure, and Pascal's law. It describes devices used to measure pressure like manometers, piezometers, and Bourdon gauges. Specifically, it provides details on how liquid manometers and differential manometers work, including the principles, setup, and equations to calculate pressure. It also lists the advantages and limitations of using manometers for pressure measurement applications.
Kinematics of fluid flow & it’s application.
This document provides an overview of fluid kinematics. It defines fluid kinematics as the study of fluid motion without considering pressure forces. It describes Lagrangian and Eulerian methods for analyzing fluid flow, and defines different types of flows including steady/unsteady, uniform/non-uniform, laminar/turbulent, compressible/incompressible, rotational/irrotational, and one-dimensional/two-dimensional/three-dimensional flows. It also discusses flow visualization techniques like streamlines, pathlines, and streaklines.
Fluid mechanics lectur notes
This document contains lecture notes on fluid mechanics. It begins with an introduction to fluid mechanics, including definitions of key terms like fluid, continuum, density, and viscosity. It then covers topics in fluid statics like pressure, hydrostatic force, and buoyancy. Later sections discuss the description and analysis of fluid motion using concepts like the control volume, streamlines, and conservation equations. The document aims to explain the physics of fluid motion to undergraduate students through examples and without advanced mathematics.
Fluid & Fluid properties
Fluid is defined as any substance that can flow and take the shape of its container. All liquids and gases are considered fluids. Key properties of fluids include density, viscosity, surface tension, and compressibility. Density is the mass per unit volume and can be used to characterize fluids as heavier or lighter than water. Viscosity is a measure of a fluid's resistance to flow - Newtonian fluids have a viscosity that does not change with stress, while non-Newtonian fluids exhibit variable or complex viscosities. Surface tension arises from unbalanced cohesive forces at the fluid surface that create a membrane-like effect. Compressibility refers to changes in a fluid's volume with pressure.
120218 chapter 8 momentum analysis of flow
The document discusses momentum analysis of fluid flow. It contains the following key points:
1) The momentum equation is based on the law of conservation of momentum, which states that the net force acting on a fluid mass is equal to the rate of change of momentum of the fluid.
2) The momentum principle can be written as an impulse-momentum equation: the impulse of a force acting on a fluid mass over a short time interval is equal to the change in momentum of the fluid.
3) The momentum equation is used to determine the resultant force exerted by a flowing fluid on a pipe bend based on the fluid's velocity, pressure, area, and external forces at two sections of the pipe.
Fluid properties
Fluid properties like density, viscosity, and specific gravity are important to characterize different fluids. Density is defined as mass per unit volume and determines whether a flow is compressible or incompressible. Viscosity measures a fluid's resistance to flow and internal friction. It is proportional to shear stress and inversely proportional to velocity gradient. Water has a viscosity of 1x10-3 N-s/m2 while air is less viscous at 1.8x10-5 N-s/m2. Specific gravity is the ratio of a fluid's density to that of water and is a dimensionless property.
Flow through pipes ppt
This document discusses laminar and turbulent fluid flow in pipes. It defines the Reynolds number and explains that laminar flow occurs at Re < 2000, transitional flow from 2000 to 4000, and turbulent flow over 4000. The entrance length for developing pipe flow profiles is discussed. Fully developed laminar and turbulent pipe flows are compared. Equations are provided for average velocity, shear stress at the wall, and pressure drop based on conservation of momentum and energy analyses. The Darcy friction factor is defined, and methods for calculating it for laminar and turbulent flows are explained, including the Moody chart. Types of pipe flow problems and accounting for minor losses and pipe networks are also summarized.
Fluid Mechanics - Fluid Pressure and its measurement
This document provides an overview of fluid pressure and measurement techniques. It begins with defining key concepts like hydrostatic pressure, Pascal's law, and pressure variation in static fluids. It then describes various devices used to measure pressure, including manometers (U-tube, single column, differential), and mechanical gauges (diaphragm, Bourdon tube, dead-weight, bellows). The document is divided into 5 units covering fluid statics, kinematics, dynamics, pipe flow, and dimensional analysis with the goal of teaching students to calculate pressure, hydrostatic forces, fluid flow, and losses in closed conduits.
S3 Chapter 2 Fluid Pressure
This document discusses fluid pressure and various ways to measure it. It defines pressure as a force per unit area and explains that pressure increases linearly with depth in a static fluid. It also describes how manometers and barometers work to measure pressure differences and atmospheric pressure respectively using the hydrostatic pressure equation. Manometers use columns of liquid like mercury or water, while barometers use a mercury column to directly measure atmospheric pressure at sea level.
Fluid mechanics
Fluid mechanics deals with the behavior of fluids at rest and in motion. It can be divided into three divisions: hydrostatics, kinematics, and dynamics. Hydrostatics studies fluids at rest, kinematics deals with fluid motion without forces, and dynamics relates velocities, accelerations, and forces acting on fluids. Fluids include liquids and gases, with gases being readily compressible and liquids being nearly incompressible. Fluid mechanics has many applications in daily life and engineering.
Bernoulli’s equation
1. The document discusses ideal fluids and their properties, including being incompressible and nonviscous.
2. It introduces concepts like laminar and turbulent flow, and uses Bernoulli's principle and the continuity equation to relate fluid properties like pressure, velocity, and flow rate.
3. Examples are given to demonstrate how Bernoulli's principle can be used to understand phenomena like decreases in pressure associated with increases in flow speed.
Bernoullis Theorem (proof and explaination)
this ppt is about topic-Bernoulli's Principal with its derivation and explaination as required in schools . Hope you will find it helpful!
TWO-DIMENSIONAL IDEAL FLOW (Chapter 6)
This document discusses two-dimensional ideal fluid flow. It begins by defining an ideal fluid as having no viscosity, compressibility, or surface tension. The continuity equation is then derived, stating that the net flow out of a control volume must equal the change in mass within the volume. Euler's equations are also derived, forming a set of partial differential equations that can be solved to determine pressure and velocity fields. Bernoulli's equation is obtained by integrating the Euler equations, relating total pressure, velocity, and elevation. The concepts of rotational and irrotational flow are introduced, with irrotational flow defined as having zero rotation of any fluid element.
Fluid Kinematics
This document provides an overview of fluid kinematics, which is the study of fluid motion without considering forces. It discusses key concepts like streamlines, pathlines, and streaklines. It describes Lagrangian and Eulerian methods for describing fluid motion. It also covers various types of fluid flow such as steady/unsteady, laminar/turbulent, compressible/incompressible, and one/two/three-dimensional flow. Important topics like continuity equation, velocity, acceleration, and stream/velocity potential functions are also summarized. The document is intended to outline the syllabus and learning objectives for a course unit on fluid kinematics.
Darcy weisbach formula
The document discusses formulas for calculating head loss in pipes due to fluid flow resistance. It describes the Darcy-Weisbach formula, which expresses head loss as a function of friction factor, pipe length and diameter, fluid velocity, and gravity. It also discusses the work of researchers like Darcy, Fanning, Colebrook and White who contributed to developing and refining formulas for calculating friction factors and head loss. The Moody chart enabled determining friction factors graphically based on Reynolds number and relative pipe roughness.
Fluid Mechanics - Fluid Properties
Topics:
1. Introduction (1 Period)
- Fluid Statics
- Fluid Kinematics
- Fluid Dynamics
- Application of Fluid Mechanics in Civil Engineering
2. Properties of Fluids (3 Periods)
- Density
- Specific Weight
- Specific Volume
- Specific Gravity
- Kinematic and Dynamic Viscosity
- Surface Tension
- Capillarity
laminar and Turbulent flow
This document discusses laminar and turbulent flow, boundary layer theory, and the Moody chart. It defines laminar and turbulent flow and describes Reynold's experiment. It introduces boundary layer theory, defining boundary layer thickness using nominal, displacement, momentum, and energy thicknesses. It describes how the boundary layer develops over a flat plate from laminar to turbulent. The Moody chart is introduced as relating friction factor, Reynolds number, and surface roughness to predict pressure drop in pipe flow.
Introduction of Fluid Mechanics
this unit describes in detail about the Fluid Flow and it have a some example to emphasize the understanding of the entire module.
Laminar and turbulent flow and reynolds number
In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing. At low velocities, the fluid tends to flow without lateral mixing, and adjacent layers slide past one another like playing cards.
Fluid Mechanics. Chapter 1. Introduction to Fluid Mechanics
Introduction to Fluid Mechanics: Relevance and significance in engineering applications, Definitions, Fluid Properties, Flow Analysis Techniques, Flow Patterns
7. fm 8 bernoulli co 2 adam edit
1. The document discusses key concepts in fluid mechanics including conservation of mass, momentum, and energy as applied to control volumes.
2. These conservation principles are expressed mathematically through equations that equate the rate of change within the control volume to the net rate of transfer into and out of the control volume.
3. Specific examples are given for the conservation of mass including the continuity equation and steady, incompressible flow cases where the equations can be simplified.
Mechanics of fluids note
1. Fluids differ from solids in that they cannot resist deformation and will flow under applied forces. Fluids are classified as Newtonian if shear stress is directly proportional to rate of shear strain.
2. The viscosity of a fluid represents its resistance to flow and is dependent on temperature. The boundary layer is a region near solid surfaces where viscous effects dominate due to the no-slip condition.
3. Bernoulli's equation relates pressure, velocity, and elevation for fluid flow. It states that for steady, incompressible flow, the sum of kinetic energy, potential energy, and pressure energy remains constant.
Ideal flow
1. This document describes various types of ideal fluid flow, including uniform flow, source/sink flow, vortex flow, and combinations of different flows.
2. Special cases of flow geometry allow the stream function ψ to be related to the distance n along a path between streamlines by ψ = wn. Examples include uniform flow in the x-direction and uniform flow from a line source.
3. Combining different flow types allows modeling of more complex scenarios. A doublet represents a close source-sink pair, and combining it with uniform flow models flow around a cylinder.
080118 chapter 7 flow measurements
This document discusses flow measurement techniques. It begins by describing flow through an orifice and defining related terms like vena contracta. It then discusses hydraulic coefficients like the coefficient of velocity and contraction. Methods for experimentally determining these coefficients are provided. Other flow measurement devices described include Venturimeters, orifice plates, Pitot tubes, and notches/weirs. Equations for calculating flow using these various devices are derived. The document concludes by examining emptying and filling of reservoirs with and without inflow.
080118 chapter 5 fluid kinematics
This document discusses fluid kinematics and different types of fluid flow. It covers topics like Lagrangian and Eulerian methods of describing fluid motion, steady and unsteady flow, laminar and turbulent flow, rotational and irrotational flow, one-, two-, and three-dimensional flows. It also defines types of flow lines like path lines, streamlines, and streak lines. Additionally, it discusses the equation of continuity and its application in cylindrical polar coordinates for describing conservation of mass in fluid flow through a stream tube.
More Related Content
What's hot
Fluid & Fluid properties
Fluid is defined as any substance that can flow and take the shape of its container. All liquids and gases are considered fluids. Key properties of fluids include density, viscosity, surface tension, and compressibility. Density is the mass per unit volume and can be used to characterize fluids as heavier or lighter than water. Viscosity is a measure of a fluid's resistance to flow - Newtonian fluids have a viscosity that does not change with stress, while non-Newtonian fluids exhibit variable or complex viscosities. Surface tension arises from unbalanced cohesive forces at the fluid surface that create a membrane-like effect. Compressibility refers to changes in a fluid's volume with pressure.
120218 chapter 8 momentum analysis of flow
The document discusses momentum analysis of fluid flow. It contains the following key points:
1) The momentum equation is based on the law of conservation of momentum, which states that the net force acting on a fluid mass is equal to the rate of change of momentum of the fluid.
2) The momentum principle can be written as an impulse-momentum equation: the impulse of a force acting on a fluid mass over a short time interval is equal to the change in momentum of the fluid.
3) The momentum equation is used to determine the resultant force exerted by a flowing fluid on a pipe bend based on the fluid's velocity, pressure, area, and external forces at two sections of the pipe.
Fluid properties
Fluid properties like density, viscosity, and specific gravity are important to characterize different fluids. Density is defined as mass per unit volume and determines whether a flow is compressible or incompressible. Viscosity measures a fluid's resistance to flow and internal friction. It is proportional to shear stress and inversely proportional to velocity gradient. Water has a viscosity of 1x10-3 N-s/m2 while air is less viscous at 1.8x10-5 N-s/m2. Specific gravity is the ratio of a fluid's density to that of water and is a dimensionless property.
Flow through pipes ppt
This document discusses laminar and turbulent fluid flow in pipes. It defines the Reynolds number and explains that laminar flow occurs at Re < 2000, transitional flow from 2000 to 4000, and turbulent flow over 4000. The entrance length for developing pipe flow profiles is discussed. Fully developed laminar and turbulent pipe flows are compared. Equations are provided for average velocity, shear stress at the wall, and pressure drop based on conservation of momentum and energy analyses. The Darcy friction factor is defined, and methods for calculating it for laminar and turbulent flows are explained, including the Moody chart. Types of pipe flow problems and accounting for minor losses and pipe networks are also summarized.
Fluid Mechanics - Fluid Pressure and its measurement
This document provides an overview of fluid pressure and measurement techniques. It begins with defining key concepts like hydrostatic pressure, Pascal's law, and pressure variation in static fluids. It then describes various devices used to measure pressure, including manometers (U-tube, single column, differential), and mechanical gauges (diaphragm, Bourdon tube, dead-weight, bellows). The document is divided into 5 units covering fluid statics, kinematics, dynamics, pipe flow, and dimensional analysis with the goal of teaching students to calculate pressure, hydrostatic forces, fluid flow, and losses in closed conduits.
S3 Chapter 2 Fluid Pressure
This document discusses fluid pressure and various ways to measure it. It defines pressure as a force per unit area and explains that pressure increases linearly with depth in a static fluid. It also describes how manometers and barometers work to measure pressure differences and atmospheric pressure respectively using the hydrostatic pressure equation. Manometers use columns of liquid like mercury or water, while barometers use a mercury column to directly measure atmospheric pressure at sea level.
Fluid mechanics
Fluid mechanics deals with the behavior of fluids at rest and in motion. It can be divided into three divisions: hydrostatics, kinematics, and dynamics. Hydrostatics studies fluids at rest, kinematics deals with fluid motion without forces, and dynamics relates velocities, accelerations, and forces acting on fluids. Fluids include liquids and gases, with gases being readily compressible and liquids being nearly incompressible. Fluid mechanics has many applications in daily life and engineering.
Bernoulli’s equation
1. The document discusses ideal fluids and their properties, including being incompressible and nonviscous.
2. It introduces concepts like laminar and turbulent flow, and uses Bernoulli's principle and the continuity equation to relate fluid properties like pressure, velocity, and flow rate.
3. Examples are given to demonstrate how Bernoulli's principle can be used to understand phenomena like decreases in pressure associated with increases in flow speed.
Bernoullis Theorem (proof and explaination)
this ppt is about topic-Bernoulli's Principal with its derivation and explaination as required in schools . Hope you will find it helpful!
TWO-DIMENSIONAL IDEAL FLOW (Chapter 6)
This document discusses two-dimensional ideal fluid flow. It begins by defining an ideal fluid as having no viscosity, compressibility, or surface tension. The continuity equation is then derived, stating that the net flow out of a control volume must equal the change in mass within the volume. Euler's equations are also derived, forming a set of partial differential equations that can be solved to determine pressure and velocity fields. Bernoulli's equation is obtained by integrating the Euler equations, relating total pressure, velocity, and elevation. The concepts of rotational and irrotational flow are introduced, with irrotational flow defined as having zero rotation of any fluid element.
Fluid Kinematics
This document provides an overview of fluid kinematics, which is the study of fluid motion without considering forces. It discusses key concepts like streamlines, pathlines, and streaklines. It describes Lagrangian and Eulerian methods for describing fluid motion. It also covers various types of fluid flow such as steady/unsteady, laminar/turbulent, compressible/incompressible, and one/two/three-dimensional flow. Important topics like continuity equation, velocity, acceleration, and stream/velocity potential functions are also summarized. The document is intended to outline the syllabus and learning objectives for a course unit on fluid kinematics.
Darcy weisbach formula
The document discusses formulas for calculating head loss in pipes due to fluid flow resistance. It describes the Darcy-Weisbach formula, which expresses head loss as a function of friction factor, pipe length and diameter, fluid velocity, and gravity. It also discusses the work of researchers like Darcy, Fanning, Colebrook and White who contributed to developing and refining formulas for calculating friction factors and head loss. The Moody chart enabled determining friction factors graphically based on Reynolds number and relative pipe roughness.
Fluid Mechanics - Fluid Properties
Topics:
1. Introduction (1 Period)
- Fluid Statics
- Fluid Kinematics
- Fluid Dynamics
- Application of Fluid Mechanics in Civil Engineering
2. Properties of Fluids (3 Periods)
- Density
- Specific Weight
- Specific Volume
- Specific Gravity
- Kinematic and Dynamic Viscosity
- Surface Tension
- Capillarity
laminar and Turbulent flow
This document discusses laminar and turbulent flow, boundary layer theory, and the Moody chart. It defines laminar and turbulent flow and describes Reynold's experiment. It introduces boundary layer theory, defining boundary layer thickness using nominal, displacement, momentum, and energy thicknesses. It describes how the boundary layer develops over a flat plate from laminar to turbulent. The Moody chart is introduced as relating friction factor, Reynolds number, and surface roughness to predict pressure drop in pipe flow.
Introduction of Fluid Mechanics
this unit describes in detail about the Fluid Flow and it have a some example to emphasize the understanding of the entire module.
Laminar and turbulent flow and reynolds number
In fluid dynamics, laminar flow is characterized by fluid particles following smooth paths in layers, with each layer moving smoothly past the adjacent layers with little or no mixing. At low velocities, the fluid tends to flow without lateral mixing, and adjacent layers slide past one another like playing cards.
Fluid Mechanics. Chapter 1. Introduction to Fluid Mechanics
Introduction to Fluid Mechanics: Relevance and significance in engineering applications, Definitions, Fluid Properties, Flow Analysis Techniques, Flow Patterns
7. fm 8 bernoulli co 2 adam edit
1. The document discusses key concepts in fluid mechanics including conservation of mass, momentum, and energy as applied to control volumes.
2. These conservation principles are expressed mathematically through equations that equate the rate of change within the control volume to the net rate of transfer into and out of the control volume.
3. Specific examples are given for the conservation of mass including the continuity equation and steady, incompressible flow cases where the equations can be simplified.
Mechanics of fluids note
1. Fluids differ from solids in that they cannot resist deformation and will flow under applied forces. Fluids are classified as Newtonian if shear stress is directly proportional to rate of shear strain.
2. The viscosity of a fluid represents its resistance to flow and is dependent on temperature. The boundary layer is a region near solid surfaces where viscous effects dominate due to the no-slip condition.
3. Bernoulli's equation relates pressure, velocity, and elevation for fluid flow. It states that for steady, incompressible flow, the sum of kinetic energy, potential energy, and pressure energy remains constant.
Ideal flow
1. This document describes various types of ideal fluid flow, including uniform flow, source/sink flow, vortex flow, and combinations of different flows.
2. Special cases of flow geometry allow the stream function ψ to be related to the distance n along a path between streamlines by ψ = wn. Examples include uniform flow in the x-direction and uniform flow from a line source.
3. Combining different flow types allows modeling of more complex scenarios. A doublet represents a close source-sink pair, and combining it with uniform flow models flow around a cylinder.
What's hot (20)
Fluid Mechanics - Fluid Pressure and its measurement
Fluid Mechanics - Fluid Pressure and its measurement
Fluid Mechanics. Chapter 1. Introduction to Fluid Mechanics
Fluid Mechanics. Chapter 1. Introduction to Fluid Mechanics
More from Binu Karki
080118 chapter 7 flow measurements
This document discusses flow measurement techniques. It begins by describing flow through an orifice and defining related terms like vena contracta. It then discusses hydraulic coefficients like the coefficient of velocity and contraction. Methods for experimentally determining these coefficients are provided. Other flow measurement devices described include Venturimeters, orifice plates, Pitot tubes, and notches/weirs. Equations for calculating flow using these various devices are derived. The document concludes by examining emptying and filling of reservoirs with and without inflow.
080118 chapter 5 fluid kinematics
This document discusses fluid kinematics and different types of fluid flow. It covers topics like Lagrangian and Eulerian methods of describing fluid motion, steady and unsteady flow, laminar and turbulent flow, rotational and irrotational flow, one-, two-, and three-dimensional flows. It also defines types of flow lines like path lines, streamlines, and streak lines. Additionally, it discusses the equation of continuity and its application in cylindrical polar coordinates for describing conservation of mass in fluid flow through a stream tube.
020118 physical properties of liquid
This document discusses the key concepts of fluid mechanics. It begins by defining fluid mechanics as the science dealing with fluids at rest or in motion, and the interactions between fluids and solids. It then covers various physical properties of liquids like density, viscosity, surface tension, and capillarity. The document also discusses divisions of fluid mechanics including fluid statics, kinematics and dynamics. It notes that fluid mechanics has applications in areas like hydraulic structures, fluid control devices, and human circulatory systems. Newton's law of viscosity is also summarized.
Chapter 10 similitude and physical modeling
This chapter discusses similitude and physical modeling in hydraulics. It covers the concept of similitude which refers to maintaining geometric, kinematic and dynamic similarity between a prototype system and its scale model. Physical modeling is then introduced as a technique to study prototypes through the use of scale models in laboratory experiments.
Chapter 8 hydraulic jump
The document discusses hydraulic jumps, which occur when flow transitions from supercritical to subcritical. A hydraulic jump is characterized by an abrupt rise in water surface with turbulence and eddies, dissipating energy.
The document classifies hydraulic jumps based on Froude number and tailwater depth. It describes free jumps where tailwater depth equals sequent depth, repelled jumps where tailwater is lower, and submerged jumps where tailwater is higher.
Equations are presented for calculating conjugate depths of flow before and after the jump based on upstream depth, velocity and specific force. Energy loss in jumps is also examined.
Chapter 7 gvf
The document summarizes concepts related to gradually varied flow in open channels. It discusses:
1. The assumptions and equations used in gradually varied flow analysis, including the energy equation.
2. The different types of water surface profiles that can occur depending on factors like bed slope, including mild slope, steep slope, critical slope, horizontal slope, and adverse slope profiles.
3. Methods for computing gradually varied flow profiles, including graphical integration, direct step method for prismatic channels, and standard step method for natural channels.
Chapter 6 energy and momentum principles
1) Open channel flow concepts such as specific energy, critical depth, Froude number, and their relationships are introduced. Critical depth corresponds to the minimum specific energy for a given discharge and occurs when the Froude number is 1. (2)
2) Flow over humps and through contractions is analyzed. For subcritical flow over a hump, the water surface lowers; above a critical hump height the water surface rises upstream in a "damming" effect called afflux. Through contractions, depth decreases for subcritical flow and increases for supercritical flow if losses are negligible. (3)
3) Broad crested weirs and Venturi flumes, which rely on critical flow principles, are commonly
300118 chapter 9 powerhouse planning
The document discusses powerhouse planning for hydroelectric projects. Key factors in determining a powerhouse location include proximity to the dam spillway and navigation locks, foundation conditions, and accessibility for transmission lines. The objectives of powerhouse planning are to house generators and turbines while considering whether to locate the structure above or below ground. Dimensions of the powerhouse depend on the size and number of units as well as space needed for equipment, loading areas, and control rooms. The powerhouse structure has sub, intermediate, and super sections to support equipment and transmit loads to the foundation.
300118 chapter 6 water conveyance a glimpse
This document provides an overview of various water conveyance structures, including pressure tunnels, non-pressure tunnels, classical and modern tunneling methods like drill-and-blast and tunnel boring machines (TBMs), immersed tunnels, tunnel jacking, supports, linings, grouting, ventilation, forebays, surge tanks, penstocks, pressure shafts, and issues like water hammer. It was prepared by Er. Binu Karki and covers topics ranging from hydraulic tunnels and canals to specific structures used in water conveyance systems.
300118 chapter 5 run of river a glimpse
This document provides an overview of the general layout of a run of river hydropower project. It describes several key components including a weir to divert water, an intake structure with trash racks and an under-sluice to control debris and sediment, and a fish ladder to help migratory fish pass through safely. It also mentions components like a spillway and settling basin to manage water flow and sediment.
300118 chapter 4 storage type glimpse
This document discusses different types of storage hydropower projects including embankment dams, concrete dams, dam intakes, radial gates, and drum gates. Storage hydropower projects use dams to store water which is then released through turbines to generate electricity.
200118 chapter 8 hydromechanical
The document provides information on hydro-electric power plants and their components. It discusses the working principles of hydro-electric power plants, how they utilize the potential energy of stored water to run turbines and generators. It also describes the layout of hydroelectric plants and different types of turbines used, including Pelton, Francis, Kaplan and bulb turbines. The document discusses the components, working principles and applications of these various turbine types. It further covers topics like specific speed, governing systems, generators, pumps and factors that influence turbine selection for a hydroelectric project.
050218 chapter 10 microhydro plant
This document summarizes the key features and benefits of micro-hydropower plants. It discusses that micro-hydropower plants are small-scale, renewable, low environmental impact, and affordable sources of energy production. They are well-suited for isolated rural communities in Nepal that have access to flowing water resources but limited connection to the national power grid. Micro-hydropower plants have high efficiency, provide continuous power generation, and require relatively low investment costs to install. The document outlines the typical components of a micro-hydropower system and provides an overview of the history and development of micro-hydropower in Nepal.
050218 chapter 7 spillways and energy dissipators
The document discusses different types of spillways and energy dissipaters used in dams. It describes overflow or ogee spillways, chute spillways, and other spillway types. The main purposes of spillways are to safely release surplus water from the reservoir and regulate floods. Energy dissipaters, like stilling basins, are structures that reduce the high kinetic energy of water flowing from spillways to prevent erosion. Hydraulic jumps, baffle blocks, and deflector buckets are common dissipater types discussed in the document. Design considerations like discharge calculations, basin length, and tailwater conditions are also covered.
Chapter 9:Uniform flow in mobile boundary channel
This document discusses uniform flow in mobile boundary channels. It defines rigid and mobile boundary channels, with mobile channels having boundaries made of loose soil that can be eroded. For mobile channels, resistance depends on both the boundary and conditions of the bed and banks. The document covers alluvial channels that transport both water and sediment, and describes shear stress distribution, incipient motion conditions, and different types of bed forms that form under varying shear stress levels including ripples, dunes, transition, and antidunes.
More from Binu Karki (15)
Recently uploaded
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
Bigdata of technology
Understanding Inductive Bias in Machine Learning
This presentation explores the concept of inductive bias in machine learning. It explains how algorithms come with built-in assumptions and preferences that guide the learning process. You'll learn about the different types of inductive bias and how they can impact the performance and generalizability of machine learning models.
The presentation also covers the positive and negative aspects of inductive bias, along with strategies for mitigating potential drawbacks. We'll explore examples of how bias manifests in algorithms like neural networks and decision trees.
By understanding inductive bias, you can gain valuable insights into how machine learning models work and make informed decisions when building and deploying them.
Hierarchical Digital Twin of a Naval Power System
A hierarchical digital twin of a Naval DC power system has been developed and experimentally verified. Similar to other state-of-the-art digital twins, this technology creates a digital replica of the physical system executed in real-time or faster, which can modify hardware controls. However, its advantage stems from distributing computational efforts by utilizing a hierarchical structure composed of lower-level digital twin blocks and a higher-level system digital twin. Each digital twin block is associated with a physical subsystem of the hardware and communicates with a singular system digital twin, which creates a system-level response. By extracting information from each level of the hierarchy, power system controls of the hardware were reconfigured autonomously. This hierarchical digital twin development offers several advantages over other digital twins, particularly in the field of naval power systems. The hierarchical structure allows for greater computational efficiency and scalability while the ability to autonomously reconfigure hardware controls offers increased flexibility and responsiveness. The hierarchical decomposition and models utilized were well aligned with the physical twin, as indicated by the maximum deviations between the developed digital twin hierarchy and the hardware.
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
The rivalry between prominent international actors for dominance over Central Asia's hydrocarbon
reserves and the ancient silk trade route, along with China's diplomatic endeavours in the area, has been
referred to as the "New Great Game." This research centres on the power struggle, considering
geopolitical, geostrategic, and geoeconomic variables. Topics including trade, political hegemony, oil
politics, and conventional and nontraditional security are all explored and explained by the researcher.
Using Mackinder's Heartland, Spykman Rimland, and Hegemonic Stability theories, examines China's role
in Central Asia. This study adheres to the empirical epistemological method and has taken care of
objectivity. This study analyze primary and secondary research documents critically to elaborate role of
china’s geo economic outreach in central Asian countries and its future prospect. China is thriving in trade,
pipeline politics, and winning states, according to this study, thanks to important instruments like the
Shanghai Cooperation Organisation and the Belt and Road Economic Initiative. According to this study,
China is seeing significant success in commerce, pipeline politics, and gaining influence on other
governments. This success may be attributed to the effective utilisation of key tools such as the Shanghai
Cooperation Organisation and the Belt and Road Economic Initiative.
Modelagem de um CSTR com reação endotermica.pdf
Modelagem em função de transferencia. CSTR não-linear.
ACEP Magazine edition 4th launched on 05.06.2024
This document provides information about the third edition of the magazine "Sthapatya" published by the Association of Civil Engineers (Practicing) Aurangabad. It includes messages from current and past presidents of ACEP, memories and photos from past ACEP events, information on life time achievement awards given by ACEP, and a technical article on concrete maintenance, repairs and strengthening. The document highlights activities of ACEP and provides a technical educational article for members.
一比一原版(UC Berkeley毕业证)加利福尼亚大学|伯克利分校毕业证成绩单专业办理
UC Berkeley毕业证原版定制【微信：176555708】【加利福尼亚大学|伯克利分校毕业证成绩单-学位证】【微信：176555708】（留信学历认证永久存档查询）采用学校原版纸张、特殊工艺完全按照原版一比一制作（包括：隐形水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠，文字图案浮雕，激光镭射，紫外荧光，温感，复印防伪）行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备，十五年致力于帮助留学生解决难题，业务范围有加拿大、英国、澳洲、韩国、美国、新加坡，新西兰等学历材料，包您满意。
◆◆◆◆◆ — — — — — — — — 【留学教育】留学归国服务中心 — — — — — -◆◆◆◆◆
【主营项目】
一.毕业证【微信：176555708】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【微信：176555708】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分→ 【关于价格问题（保证一手价格）
我们所定的价格是非常合理的，而且我们现在做得单子大多数都是代理和回头客户介绍的所以一般现在有新的单子 我给客户的都是第一手的代理价格，因为我想坦诚对待大家 不想跟大家在价格方面浪费时间
对于老客户或者被老客户介绍过来的朋友，我们都会适当给一些优惠。
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
选择实体注册公司办理，更放心，更安全！我们的承诺：可来公司面谈，可签订合同，会陪同客户一起到教育部认证窗口递交认证材料，客户在教育部官方认证查询网站查询到认证通过结果后付款，不成功不收费！
学历顾问：微信：176555708
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024) will provide an excellent international forum for sharing knowledge and results in theory, methodology and applications of on Machine Learning & Applications.
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
As digital technology becomes more deeply embedded in power systems, protecting the communication
networks of Smart Grids (SG) has emerged as a critical concern. Distributed Network Protocol 3 (DNP3)
represents a multi-tiered application layer protocol extensively utilized in Supervisory Control and Data
Acquisition (SCADA)-based smart grids to facilitate real-time data gathering and control functionalities.
Robust Intrusion Detection Systems (IDS) are necessary for early threat detection and mitigation because
of the interconnection of these networks, which makes them vulnerable to a variety of cyberattacks. To
solve this issue, this paper develops a hybrid Deep Learning (DL) model specifically designed for intrusion
detection in smart grids. The proposed approach is a combination of the Convolutional Neural Network
(CNN) and the Long-Short-Term Memory algorithms (LSTM). We employed a recent intrusion detection
dataset (DNP3), which focuses on unauthorized commands and Denial of Service (DoS) cyberattacks, to
train and test our model. The results of our experiments show that our CNN-LSTM method is much better
at finding smart grid intrusions than other deep learning algorithms used for classification. In addition,
our proposed approach improves accuracy, precision, recall, and F1 score, achieving a high detection
accuracy rate of 99.50%.
原版制作(unimelb毕业证书)墨尔本大学毕业证Offer一模一样
学校原件一模一样【微信：741003700 】《(unimelb毕业证书)墨尔本大学毕业证》【微信：741003700 】学位证，留信认证（真实可查，永久存档）原件一模一样纸张工艺/offer、雅思、外壳等材料/诚信可靠,可直接看成品样本，帮您解决无法毕业带来的各种难题！外壳，原版制作，诚信可靠，可直接看成品样本。行业标杆！精益求精，诚心合作，真诚制作！多年品质 ,按需精细制作，24小时接单,全套进口原装设备。十五年致力于帮助留学生解决难题，包您满意。
本公司拥有海外各大学样板无数，能完美还原。
1:1完美还原海外各大学毕业材料上的工艺：水印，阴影底纹，钢印LOGO烫金烫银，LOGO烫金烫银复合重叠。文字图案浮雕、激光镭射、紫外荧光、温感、复印防伪等防伪工艺。材料咨询办理、认证咨询办理请加学历顾问Q/微741003700
【主营项目】
一.毕业证【q微741003700】成绩单、使馆认证、教育部认证、雅思托福成绩单、学生卡等！
二.真实使馆公证(即留学回国人员证明,不成功不收费)
三.真实教育部学历学位认证（教育部存档！教育部留服网站永久可查）
四.办理各国各大学文凭(一对一专业服务,可全程监控跟踪进度)
如果您处于以下几种情况：
◇在校期间，因各种原因未能顺利毕业……拿不到官方毕业证【q/微741003700】
◇面对父母的压力，希望尽快拿到；
◇不清楚认证流程以及材料该如何准备；
◇回国时间很长，忘记办理；
◇回国马上就要找工作，办给用人单位看；
◇企事业单位必须要求办理的
◇需要报考公务员、购买免税车、落转户口
◇申请留学生创业基金
留信网认证的作用:
1:该专业认证可证明留学生真实身份
2:同时对留学生所学专业登记给予评定
3:国家专业人才认证中心颁发入库证书
4:这个认证书并且可以归档倒地方
5:凡事获得留信网入网的信息将会逐步更新到个人身份内，将在公安局网内查询个人身份证信息后，同步读取人才网入库信息
6:个人职称评审加20分
7:个人信誉贷款加10分
8:在国家人才网主办的国家网络招聘大会中纳入资料，供国家高端企业选择人才
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Ppt on evs amity University project work.........................??????!?!?!?!!?!!?!!?/?/?/?/?/?
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
HEAP SORT ILLUSTRATED WITH HEAPIFY, BUILD HEAP FOR DYNAMIC ARRAYS.
Heap sort is a comparison-based sorting technique based on Binary Heap data structure. It is similar to the selection sort where we first find the minimum element and place the minimum element at the beginning. Repeat the same process for the remaining elements.
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Robot manipulators have become important equipment in production lines, medical fields, and transportation. Improving the quality of trajectory tracking for
robot hands is always an attractive topic in the research community. This is a
challenging problem because robot manipulators are complex nonlinear systems
and are often subject to fluctuations in loads and external disturbances. This
article proposes an adaptive synchronous sliding control scheme to improve trajectory tracking performance for a robot manipulator. The proposed controller
ensures that the positions of the joints track the desired trajectory, synchronize
the errors, and significantly reduces chattering. First, the synchronous tracking
errors and synchronous sliding surfaces are presented. Second, the synchronous
tracking error dynamics are determined. Third, a robust adaptive control law is
designed,the unknown components of the model are estimated online by the neural network, and the parameters of the switching elements are selected by fuzzy
logic. The built algorithm ensures that the tracking and approximation errors
are ultimately uniformly bounded (UUB). Finally, the effectiveness of the constructed algorithm is demonstrated through simulation and experimental results.
Simulation and experimental results show that the proposed controller is effective with small synchronous tracking errors, and the chattering phenomenon is
significantly reduced.
Recently uploaded (20)
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
5214-1693458878915-Unit 6 2023 to 2024 academic year assignment (AutoRecovere...
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
CHINA’S GEO-ECONOMIC OUTREACH IN CENTRAL ASIAN COUNTRIES AND FUTURE PROSPECT
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
ACRP 4-09 Risk Assessment Method to Support Modification of Airfield Separat...
6th International Conference on Machine Learning & Applications (CMLA 2024)
6th International Conference on Machine Learning & Applications (CMLA 2024)
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
Tutorial for 16S rRNA Gene Analysis with QIIME2.pdf
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
DEEP LEARNING FOR SMART GRID INTRUSION DETECTION: A HYBRID CNN-LSTM-BASED MODEL
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
PROJECT FORMAT FOR EVS AMITY UNIVERSITY GWALIOR.ppt
Generative AI leverages algorithms to create various forms of content
Generative AI leverages algorithms to create various forms of content
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Heap Sort (SS).ppt FOR ENGINEERING GRADUATES, BCA, MCA, MTECH, BSC STUDENTS
Adaptive synchronous sliding control for a robot manipulator based on neural ...
Adaptive synchronous sliding control for a robot manipulator based on neural ...
260118 chapter 6 fluid dynamics
- 1. Fluid Dynamics Prepared by: Binu karki Lecturer
- 2. Dynamics of fluid flow Dynamics of fluid flow is the study of fluid motion with the forces causing flow. Dynamic behavior of the fluid flow is analyzed by the Newton's second law of motion which relates to the acceleration with the forces.
- 6. Euler's equation of motion
- 7. Euler's equation of motion
- 8. Euler's equation of motion
- 9. Euler's equation of motion
- 10. Bernoulli’s Equation from Euler’s equation
- 11. Assumptions of Bernoulli’s equation • The fluid is ideal i.e viscosity is zero • The flow is steady • The flow is incompressible • The flow is irrotational
- 12. Bernoulli's equation for real fluid • This equation was with an assumption fluid is inviscid (non-viscous) and frictionless. • But all real fluids are viscous and offer resistance to flow. • This causes loss in energy during fluid flow and this has to be taken into consideration.
- 13. Practical applications of Bernoulli's equation • It is applied in all problems of incompressible fluid flow where energy considerations are involved. • It has its applications in a) Venturimeter
- 14. Practical applications of Bernoulli's equation Orifice meter
- 15. Practical applications of Bernoulli's equation Piezometer