I am a self-motivated individual. I put my all into everything I do to get the job done effectively and efficiently. I could say that challenging work and the pursuit of success drives me to deliver the best out of me. I always ensure that my clients get the best service which I can provide. I have always felt that it is important, both to me personally, and for my company that my clients are fully satisfied and provides a positive feedback. My drive to constantly develop my technical and interpersonal skills is the reason for my good reputation within my present organization and among all my clients.

1. 1 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
Krishna Kumar
OBJECTIVE
Seeking challenging and highly motivated assignments in Oil & Gas, Power & Energy projects with an
organizationtodelivermybest experienceandupgrade myskills,thereby growing along with the organization.
SYNOPSIS
 Over16 yearsof experience asElectrical Design Professional in Basic, FEED, Detailed Engineering and EPC
projects for various sectors like Power, Oil & Gas, Refinery, Petrochemicals and Chemicals Industry.
 Experience of site visitin PowerPlant, Electrical Sub-Substation, Defence, onshore oil fields, refinery and
chemical plant.
 Detail Designingof LV Draw out/Fixedtype SwitchgearPanel andBus-Duct.Erection&commissioningof LV
Motors, LV Switchgears, LV & HV Cable Laying & Termination in Defense Chemical Plant.
 ProficiencyinVendordrawingreview,Tenderreview,Proposal Preparation,Bidding,CostEstimation& Site
Support.
 Knowledge of International & Local Standards, codes and Specification likewise Shell DEP, IEC, BS, IEEE,
ADCO, GASCO, PDO, QP & EIL.
 Experience inimplementationof QualityManagementSystem inthe organization andISOCertifiedInternal
Auditor as per ISO 9001: 2008 Standards.
 Quick learner having strong problem solving ability and analytical skills. Ability to manage multitask and
work on a diverse range of requirements and projects simultaneously. Highly versatile and professional
person with good interpersonal qualities and communication skills.
AREAS OF EXPERTISE
 Preparation & checking of Installation Standard Drawings as per ADCO/GASCO Standards.
 Detail Engineering Electrical Layout of Earthing, Power, Lighting, Cable Routing, Hazardous Area and
Equipment room layout.
 Detailingof Electrical EarthingCable BlockDiagram, Earthingphilosophy,ElectricalCable BlockDiagramand
Electrical Interconnection Diagram.
 Preparation & checking of E&I Cable Schedule, Electrical Equipment Schedule, Electrical Junction Box
Schedule, Socket Schedule, List of Electrical & Instrument Tag Plates and Electrical Bulk MTO.
 Preparation & checking of Instrument Cable Routing Layout, Instrument Location Layout and Fire & Gas
Location Layout.
 Expertise in Single Line Diagram, General Arrangement drawing, bill of materials and schematic diagram.
 Designing of MCT (Multi Cable Transit) for Oil & Gas industry.
PROJECTS EXECUTED
1. Project : Interconnection of ADWEC CRS to DEL at Taweelah
Location : Taweelah, Abu Dhabi, UAE
Client : Al Asab General Transport & Contracting, Abu Dhabi
End User : GASCO (Abu Dhabi Gas Industries Ltd).
Scope : Detail Engineering.

2. 2 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
Highlights : GASCOengaged Al Asab as EPC Contractor for Interconnection of 36” pipeline from
ADWEC CRS to DEL at Taweelah.Al AsabAwardedthis project to PL Engineering for
Detail design engineering.
Role : Sr. Designer (Electrical)
2. Project : EPC for replacement of existing Power Skid for Clusters – 40 to 45
Location : Bu Hasa, Abu Dhabi, UAE
Client : Matrix Construction, Abu Dhabi
End User : ADCO (Abu Dhabi Company for Onshore Petroleum Operations).
Scope : Detail Engineering.
Highlights : ADCOengagedMatrix as EPC Contractor to replace 6 existing Power SupplySkids at
Water Injection Clusters 40-45 at Bu-Hasa Field. Matrix Construction awarded this
Project to PL Engineering for detail design engineering.
Role : Sr. Designer (Electrical)
3. Project : Flowline & Wellhead installation in ADCO fields.
Location : Bu Hasa, Abu Dhabi, UAE
Client : Galfar Engineering & Contracting, Abu Dhabi
End User : ADCO (Abu Dhabi Company for Onshore Petroleum Operations).
Scope : Detail Engineering.
Highlights : ADCO appointed Galfar Engineering & Contracting as EPC contractor. The Scope
Of work consists of EPC work of wellhead piping and pipeline from wellheads
to Manifold area. Total 14 no’s of charismas trees are in Work scope which is
sub-divided in six type of wells (Oil Producing, ESP, Water Disposal, Water
Injection, WAG & Gas Lift).
Role : Sr. Designer (Electrical)
4. Project : Tie-In Works at South East, Abu Dhabi
Location : Asab, Shah & Sahil, Abu Dhabi, U.A.E.
Client : ADCO (Abu Dhabi Company for Onshore Petroleum Operations).
Scope : EPC.
Highlights : The Scope of work consists of EPC work of wellhead piping and pipeline from
Wellheads to manifold area. Total 135 no’s of charismas trees are in Work
scope which are sub-divided in six types of wells (Oil Producing, ESP, Water
Disposal,Water Injection, PW Re-injection & Gas Lift).
Role : Sr. Designer (E&I)
5. Project : Safe Water Chemicals Upgrade Project
Location : Mussafah, Abu Dhabi, U.A.E.
Client : AL Kout Industrial Projects Co.
Scope : Detail Engineering.
Highlights : Upgrade of Safe water Chemicals factory from 20 TPD to 40 TPD Sodium
HydroxideProduction that to be constructed for Al Kout Industrial Projects Co.
Located in theIndustrial City of Abu Dhabi (ICAD I), UAE. The new Electrolyser
for this project will be provided by Ineous Technologies. PL Engineering is
contracted to provide detail engineering services for this Project. The plant will
produce Sodium hydroxide(NaOH), Hydrochloric Acid (HCL), Sodium Hypo
Chloride (NaOCl).
Role : Sr. Designer(Electrical)

3. 3 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
6. Project : OXY MUKHAIZNA PHASE II Projects (EPC)Safe Water Chemicals Upgrade
Location : Oman
Client : OCCIDENTAL MUKHAIZNA LLC
Scope : EPC – Punj Lloyd Ltd, Detail Engineering – Technip, USA, Engineering Co-Ordinator
– PL Engineering Pte Ltd.
Highlights : Occidental of Oman operate the Mukhaizna field, the operations at
Mukhaizna Comprise drilling, processing and stabilization of well fluids for
Export and steam Generation and steam flooding of the reservoir formations
to maximize the oil Recovery from the field. Phase-ll of the field development
At Mukhaizna is the Expansion of the facilities to incrementally increase the
Water and steam flooding Capacities together with modifications to the Central
Processing Facilities (CPF).
1. Water TreatmentPlant(WTP) (Lots1, 2 & 3) Companyisplanningtoexpand the
Water treatment facilities to treat an additional 390,000 BPD of boiler quality
water required to recover 150,000 BPD of oil from its field through the steam
injection process technology. The WTP will be divided into 3 Lots as below:
Lot # 1 – 130,000 BWPD
Lot # 2 – 140,000 BWPD
Lot # 3 – 120,000 BWPD
2. Central Processing Facilities (CPF) Upgrades Company is planning work on
three
Major, discrete areas of the process plant as part of this project. These are:
Dehydration Unit
De-Oiling Train 3
Balance of Plant
Role : Sr. Designer (Electrical)
7. Project : CONVERSION OF HABSHAN 0 & 1 LEGACY DOCUMENTS TO SPPID AND SPI
Location : Habshan, Abu Dhabi, UAE
Client : GASCO (Abu Dhabi Gas Industries Ltd.)
Scope : Conversionof As-builtP&IDintoIntergraphSmartPlantP&IDSoftware.
Highlights : In order to improve the documentation infrastructure and cope withThe As
Built best practices, GASCO intends to convert the existing documentation
from Micro Station to Smart Plant Enterprise. Conversion of drawing &
documents to SPEL, SPPID & SPI. Procurement of software (SPI, SPPID, SPF)
and Hardware (servers) Scope of work under this project conversion of
Habshan 0, 1, 2 & Bab document to Smart Plant P&ID &Instrumentation. The
Project includes development of the data base of these two systems, SPPID &
SPI, Along with their deliverables. Number of P&lDs to be converted to
SPP&ID – 1400 nos. approx. Number of Instrumentation Drawings tobe
converted to SPI- 30,000 nos. approx.
Role : Sr. Designer
8. Project : EPC of 500,000 US BBL New Tank #7 at RasLanuf

4. 4 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
Location : Tripoly – Libya
Client : VEBA OIL OPERATIONS
Scope : EPC–Punj Lloyd Ltd, Detail Engineering & Support–PL Engineering Pte Ltd.
Highlights : The Scope of work consists of EPC work of Replacement of 500000US Bbl
Floating Roof above ground storage tank number #7. Rresponsible for the
Entire CAD works Related to the project. Ensured Cad deliverables are in Line
withprojectdrafting Requirements. Had close interaction with all the Discipline
designersandrigorous Co-ordination with discipline leads as Well asEngineering
Manager. Prepared Drawing Templates (A1 & A3 sizes) for the project as per
Client procedures & Standards. Also I prepared SLDfor PMCC & MCC, Lighting
calculation, Cable Trench& Tray Layout, Lighting Layout, Power Layout, Earthing
Layout,Hazardous Area Layout, Cable Schedule, Lighting & Power panel schedule.
Role : Designer
9. Project : SGTP –STRATEGIC GAS TRANSMISSION PROJECT
Location : Doha, Qatar
Client : Qatar Petroleum (QP)
Scope : EPC-Punjlloyd Ltd, Detail Engineering-NAMA Mott MacDonald, Engineering
Support-PL Engineering Pte Ltd.
Highlights : The Scope of work consist of EPC work of 2 nos 36” pipe line from Station-V
(Raslaffan) to Station-S (Mesaieed) through Station-T3. It also Consistof total 4
no’s Section Block Valve station between Station-V to Station-T3 and Total 2
no’s section Block Valve station between Stations – T3 to Station-S. Reviewed,
Checked & Verified Drawings / Documents. Worked with CAD Team from design
office to fix various mistakes/mismatches detected in Design Consultant (NAMA
Mott) drawings& Vendor drawings. Co-ordination between construction team,
Vendors &Consultant (NAMA Mott MacDonald), Engineering Team, Project
Team & otherDisciplines.Helping to the Vendors for fast material delivery at site.
Checking of E &I drawings /documents produced by Consultants/Vendors.
Preparation of Loop Diagram (Instrument, Fire & Gas) with the help of RTU, DCS,
ESD, Fire & Gas wiring Data Base and Cable block diagram, Junction Box Wiring
Diagram & Cable schedule. Piping arrangement Layout, Lighting Calculation, MTO
and drafting for other Disciplines for Proposals as well as Projects. FAT test at
Vendor shop floor for SGTP.
Role : Designer
10. Project : FUEL HYDRANT SYSTEM
Location : Doha, Qatar
Client : New Doha International Airport (NDIA), Doha, State of Qatar
PMC : Overseas Bechtel, Inc.
Scope : EPC-Punjlloyd Ltd, Detail Engineering-JP Kenny, Engineering Support-PL
EngineeringPte Ltd.
Highlights : The Scope of work consist of Fuel Receiving Station with 8 unloading
Bridges forPumping Jet A1 fuel to Storage Tanks, Fuel Farm for Jet A1 Fuel
Storage with Hydrant PumpStation,16km of dual fuel hydrantringfor loading fuel
to aircrafts and Ground service equipment (GSE) fuel stations.
Role : Designer (Electrical)

5. 5 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
11. Project : Delayed Coker & LPG Merox Unit
Location : Vadodra, Gujrat
Client : Indian Oil Corporation
Scope : EPC-Punjlloyd Ltd, Detail Engineering -PL Engineering Ltd.
Highlights : PunjlloydgotLSTKcontract forsetting up Delayed Coker & LPG merox unit at IOCL,
Vadodra. PL Engineering was responsible for detailed engineering for this
Unit.
Role : Designer(Electrical)
12. Project : MSQ Upgrading Refinery
Location : Barauni, Bihar
Client : Indian Oil Corporation
Scope : EPC-Punjlloyd Ltd, Detail Engineering -PL Engineering Ltd.
Highlights : Punjlloyd got LSTK contract for setting up Refinery unit at IOCL,Barauni.
PL Engineering was responsible for detailed engineering for thisunit.
Role : Designer(Electrical)
13. Project : SCADA system Up-gradation.
Location : India, Bangladesh & Bhutan
Client : Power Grid Corporation, TATA Power Ltd.
Highlights : Areva T&D Systems India Ltd got LSTK & Engineering contract for setting up SCADA
System at 400kV, 220kV S/S for this unit.
Role : Designer (Electrical)
14. Project : Up gradation of Chemical Plant.
Location : Nagpur, Maharashtra, India.
Client : Defense Research and Development Organization (DRDO).
Highlights : Hands onexperienceof erection &commissioningof switchgearpanel,LV&HV cable
laying, street lighting, LV motors. Further O&Mof Electrical S/S, Plumbing and fire
fighting system.
Role : Supervisor (Electrical)
15. Project : Yash Papers Ltd.
Location : Faizabad, Uttar Pradesh, India.
Client : Yash Papers Ltd.
Highlights : Hands on experienceof erection&commissioningof switchgearpanel,LV&HV cable
laying, street lighting, LV motors. Further O&Mof 2.5MW Thermal Power Plant.
Role : Junior Engineer (Electrical)
16. Project : 132kV Substation.
Location : Bina, Sonebhadra, Uttar Pradesh, India.
Client : Uttar Pradesh Power Corporation Ltd.
Highlights : Hands on experience of Operation & Maintenance of 132kV substation.
Maintenance of CT, PT,PowerTransformer,Oil Circuit Breaker, SF6, Vacuum Circuit
Breaker, Off load and On load isolator & changeover.
Role : Technical Apprentice (Electrical)

6. 6 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
CAREER SUMMARY
Company Designation Duration
PL EngineeringPte Ltd., AbuDhabi,U.A.E.
(FormerlySimonCarvesIndia A Punj Lloyd
Group Company)
DeputyManager (Electrical) Jan 2008 to till date
ArevaT&D SystemsIndiaLtd.,Noida,India Designer (Electrical) Sep 2006 to Jan 2008
Controls& SwitchgearCo.,Noida,India Design Engineer (Electrical) Aug 2005 to Aug 2006
AdlecSystemPvt.Ltd.,NewDelhi,India Jr. Engineer Design (Electrical) Aug 2004 to Jul 2005
Uttar PradeshPowerCorporationLtd.,India Technical Apprenticeship(Electrical) Mar 2002 to Mar 2003
Yash PapersLtd.,Faizabad,U.P.,India Jr. Engineer (Electrical) Sep 1999 to Aug 2001
ACHIEVEMENTS & CERTIFICATES
 National CadetCorps“B” Certificate (India).
 “Certificate of Attendance&Participation”forIEC/IECEx heldon21&22 March-12, Dubai,United Arab
Emirates.
 “Certificate of Attendance”forISO9001: 2008 QualityManagementSystem(Introductory&Internal
AuditorTraining) heldon12TH & 13TH October,2014, Abu Dhabi,UnitedArabEmirates.
 Memberof http://nmc.toastmastersclubs.org
SOFTWARE SKILLS
 Workingexperience onMS-Office
 TrainingonMS-Office 2010
 TrainingonMS-Access
 TrainingonMS-Powerpoint
 SPEED V2.1 (SwitchgearDesign)
 AutodeskMEP2010 (AutoCAD)
 LightingCalculation Software
 IntergraphSPPID-2009
 IntroductiontoPDMS.
EDUCATION
Qualification Institute / Board
Score Year
DiplomainRailway
Engineering
Institutionof PermanentwayEngineers
(India),Rail Bhawan,New Delhi
53% 2003
Diplomain Electrical
Engineering.
Uttar PradeshBoardof Technical
Education,Lucknow
77% 1999
12th
Grade (Maths Stream)
GovernmentInterCollege,Pipari,
Sonbhadra,Uttar Pradesh
57% 1996

7. 7 Address: Flat No. 1503, City Tower, Khalifa Street, Near Al Noor Hospital, Abu Dhabi, U.A.E.| Tel. +971 26351095
Email: krishnasimon1508@gmail.com| Mob: +971-552399307
PERSONAL PROFILE
Nationality : Indian
Date of Birth : 15-08-1977
Maritul Status : Married
Passport No. & Validity : G4804520, Sep, 2017.
Visa Status : U.A.E., Residency Visa, Valid up to Sep, 2016.
Languages known : English & Hindi.
Total Experience : 16+ Years
Present Designation : Deputy Manager (Electrical)
DECLARATION
I hereby declare that the information provided is true to my knowledge.
Krishna Kumar
Abu Dhabi, U.A.E.
Dated: 11 Jan, 2016