1. CV
Personal Information
Name : Ahmed El- Kholy
Mobile +201006387759
E-mail ahmed_elkholy145@yahoo.com
Nationality egyptian.
Hone adress 1- el Besoty street- Kafr Shbeen el Kanater–el Qaliobia, Egypt
 Dynamic and result oriented professional with 9 years of experience in Oil & Gas &
power plants & different process based industries (mining & petrochemicals),
handling mainly engineering technology, design, piping construction and
commissioming.
 Extensive supervisory & Man Management skill, able to communicate effectively
and work well with multi-national work force.
 Specialist in PDMS modelling.
 Specialist in piping construction & commissioning.
 Material coordinator.
 Acts as a professional instructor, Training junior engineers with AutoCAD, PDMS for
Drafting & Model review.
 Capture new experience easily and good reader.
KEY COMPETENCIES

2. Experiences
Current Job From 17 July 2016 up tell now.
Position : Mechanical /Piping Commissioning Engineer.
Client : GUPCO Petroleum Company
Company : EMC
Project : Morgan36 Rehab Project (offshore)
RESPONSABILITES
- carry out mechanical completion, precommissioning
and commissioning of all the units, tankages and all interconnecting piping in
association with Owner’s operating personnel.
- Checking for final re-instatement and create a Punch List
- Review nitrogen purge loops by system and wittiness for purging.
- Supervise the hot tapping, Hydrostatic test and flushing for each system.
- Responsible for technical solution for deviation from engineering
- Responsible for the leak test per each system.
- Assist operating team on start up activity to achieve plant start up.
Prevous job From May 2016 Till 16/7/2016.
Position : Piping Construction Superintendent.
Client : SIEMENS / PSP
Company : EL MASRIA CONSTRUCTION Co.
Project : Beni Suef Fast Track 4800 MW Combined Cycle Power Plant.
- Responsible of all Piping activities On Base, Off Base and POP in fast track project.
- Solving any problem related to piping activities
- Control and manage all Piping and Mechanical activities during meeting to avoid any SIMOPS

3. - Follow Up Construction & Erection Work And Prepare Fabrication Status Report.
- Supervise material status according to isometric material list.
- Prepare as-built drawing according site requirements.
- Monitor all Piping construction activities with emphasis on quality, schedule and HSE.
- Participate in inspection activities according to Inspection and Test plan (ITP) as required.
- Follow up and ensure that all working environment requirements are fulfilled.
- Supervise local inspectors in site team.
- Monitor the receipt and storage of materials within the discipline.
- Participate in audits/verifications as required.
- Ensure MC complete for handover to Commissioning.
Previous Job From 15 January 2016 TO 30 April 2016.
Position : Commissioning Engineer.
Client : PHPCo. Pharaonic Petroleum Company - Port Said
Company : ENPPI
Project : West Harbour Expansion Project (onshore)
RESPONSABILITES
- carry out mechanical completion, precommissioning
and commissioning of all the units, tankages and all interconnecting piping in
association with Owner’s operating personnel.
- Checking for final re-instatement and create a Punch List
- Review nitrogen purge loops by system and wittiness for purging.
- Supervise the hot tapping, Hydrostatic test and flushing for each system.
- Responsible for technical solution for deviation from engineering
- Responsible for the leak test per each system.
- Assist operating team on start up activity to achieve plant start up.
Previous Job From February 2014 Up To 14 January 2016.
Job Title Piping Engineer & Designer (onshore)

4. Company Basra Gas Company
Basrah Gas Company is a 25-year incorporated Joint Venture between Iraq’s South Gas Company
holding 51% of its shares, Shell 44% and Mitsubishi Corporation 5%. The Joint Venture captures
associated gas that is currently being flared from three oil fields in southern Iraq – Rumaila, West
Qurna and Zubair.
Follow Up Construction & Erection Work And Prepare Fabrication Status Report.
supervise material status according to isometric material list.
prepare as-built drawing according site requirements.
Monitor all Piping construction activities with emphasis on quality, schedule and HSE.
Participate in inspection activities according to Inspection and Test plan (ITP) as required.
Follow up and ensure that all working environment requirements are fulfilled.
Supervise local inspectors in site team.
Monitor the receipt and storage of materials within the discipline.
Participate in audits/verifications as required.
Monitor work progress against plans and schedules and highlight areas of concern and possible
corrective actions.
Ensure that Contractors personnel are qualified in accordance with project requirements.
Assist Contractor with discipline field engineering / construction details upon request or as required.
Interface with Piping discipline at EPC Contractor.
Ensure that systems and equipment are protected and preserved.
Monitor and survey the pipe fabrication and testing.
Review selected drawings and documents issued by EPC Contractor.
Ensure that fabrication documentation is issued by Contractor in accordance with requirements.
- Installation, commissioning and start-up two degassing stations
- Rehabilitation of five dehydration (TEG) units.
The station have been out of service for long time and the client required to
rehabilitate and start up.
- Working during several shutdowns for LPNE modifications.
- Rehabilitation of gas compressor stations.
The units have been out of service long time ago and the client asking to carry out
rehabilitation enables reuse again.
RESPONSABILITES

5. Ensure MC complete for handover to Commissioning.
Design pipe routing for all different systems.
Isometric Preparing , measuring actual length for existing pipes, design model & extract data.
make final report including material takeoff.
Preparation of nozzle orientation document
Coordinating of piping department with Structure & Equipment departments
Material coordinator.
Previous Job From. September 2010 Up To Februray 2014
Job Title PIPING ENGINEER & PDMS INSTRUCTOR
Company EVRMaC
Company's Profile
EVRMaC Is a joint stock multidisciplinary engineering firm based in Cairo - Egypt, founded in 1997
by a group of professionals with rich international experience.
EVRMaC provide specialized Engineering, Procurement Assistance, and Construction Support
Services. From conceptual phase through final detailed designs.
EVRMaC serve Oil & Gas, Process Industries, Power Plants, District Cooling, and Buildings.
- Cairo West thermal power station compined cycle 2x750 MW.
- Tebeen thermal power station compined cycle.
- Sedi Krir thermal power station compined cycle.
- El Shabab thermal power station single cycle (gas turbine) .
- Domiate thermal power station single cycle (gas turbine) .
- Henikel factory extension with AUHDE co.
- Angola two thermal power station single cycle (gas turbine) .
- Sokari Gold Mine extinsation

6. Duties and Responsibilities:
Design pipe routing for all different systems.
Isometric Preparing & measuring actual length for existing pipes design model & extract data.
design pipe support & take actual measuring to model existing supports.
make final report including material takeoff.
make final GA, PID Drawings for all different systems.
Preparation of nozzle orientation document
3D modeling design (P.D.M.S.)
Coordinating of piping department with Structure & Equipment departments.
Training junior engineers with AutoCAD, PDMS for Drafting Model review.
Previous Job From. May 2008 Up To Sebtamber 2010
Job Title Piping & Rotating Equipment Construction Engineer
Company Kahromika (Misr Co. For Mechanical Electrical Projects)
Company's Profile
From 1971 till today, KAHROMIKA has improved itself to be the major electro-mechanical
contractor in Egypt, through its extensive participation to most of the projects in the power
generation, transmission and distribution. After approximately 40 years of valuable history,
KAHROMIKA become today the solution to achieve the formula of success; competitive cost and
high quality in the required time. For the previous reasons most of the international companies
recommend KAHROMIKA to be their partners in Egypt and Middle East.
- Cairo West thermal power station compined cycle 2x750 MW.
- Talkha thermal power station compined cycle.
- Ben Gazi thermal power station compined cycle.
- Belqas Sugar factory extensions.

7. Duties and Responsibilities:
Install critical and non-critical piping for all different system “large bore”
Installation small-bore line critical and non-critical.
Prepare for hydrotest – supervise hydrotest.
Prepare weekly report progress.
Close all mechanical punch list items.
Make RFI “Request for Information.
Make SRN “site request Notice.
Languages
Arabic: fluent written & spoken
English: fluent written & spoken
Frensh: fair
Training
AutoCAD , AutoCAD plant 3d
. PDMS12.6 Piping Design ,Equipment, Isodraft, Draft, Cats & Specs, Spooler, Router, HVAC,
Cable Tray, Structure, Spooler, Electrical Component And Admin
Caepipe Piping Stress Analysis
. Primavera 6 Advanced Course
Welding Inspection FIVE Methods
Hazard _Awareness _Certificate.
HITRA_ Awareness _ Certificate.
Introduction _to _Control _of_ Work _ _Certificate.
Work Safe _ HITRA _ Certificate.Work Safe _ PTW _ Certificate
Maintenance Of Diesel Engines &Hydraulic Systems.

8. Academic Information & personaldata
First University Degree B.Sc. Engineering
University Helwan University / Egypt
Faculty Matria Engineering
Major Mechanical Engineering.
Grade Good
Graduation Year 2008
Last Year Grade Very Good
Marital status : married + 3
Military status : exempted