1. NAME : RAMY EMAD MESSEHA GERGES
POSITION : PROJECT ENGINEER
NATIONALITY: EGYPTIAN
EXPERIENCE SUMMARY
Employer
Industry
Position
From/To
Description
Major Projects
VALENTINE MARITIME (GULF) LLC. (UAE)
OIL AND GAS
PROJECT ENGINEER
January 2015 to Present
1. Working at PMT.
2. Engineering, Construction and off shore installation.
• Client: ONGC/ESSOL
• Project: Installation works under C26 Cluster & B173A-B Well
Platform Project.(Off shore)
• Project management, review of various analysis, engineering and
installation of well platform jacket structures, comprising of a four
legged jacket, four main piles and six straight conductor piles also
installation of four topside decks and bridge between the new jacket
installed and existing one in accordance with ONGC’s requirements
and specifications.
Employer LAMPRELL ENERGY Ltd (UAE)
Industry
Position
OIL AND GAS
PROJECT ENGINEER
From/To April 2012 to 2014
Description
Major Projects
1. Working at PMT.
2. Engineering, Construction, installation and mechanical work.
• Client: RAK GAS
• Project: Repair of Crude Oil Storage Tank TK-107.
• TK-107 is 53 meters diameter tank and 18 meters height, disposal
and cleaning of sludge from the tank and MFL for bottom plate and
UTG for roof top and replacing the whole bottom plate with
patching for annular plates with vacuum test and hydro test then
applying 3 coat painting and released back to RAK GAS plant.
• Client: RAK GAS
• Project: Atlantis Sour Gas Compressor Piping Modifications.
• Prefabrication , welding and erection of 10 inch piping inside the
gas plant with the installation of PSV , SDV and check valve and
installation of all the E&I installments on the modified line.
• Client: DNO
• Project: Modification of Saleh-1 project.
• Prefabrication and welding of piping modification, pipe supports
and the revamping of 6 inch vertical pig launcher and install off
shore.
PAGE 1 OF 3
2. • Client: DNO
• Project: Block-8 flow segregation project.
• Prefabrication and welding of 12 inch piping and platforms at our
main yard in Sharjah and the fabrication of 6 inch pig launcher and
receiver and install it off shore.
• Client: Gulf Refinery Company (GRC).
• Project: Pipe Line and Associated works at Berth #6 area.
• Laying of two 18 inch underground pipelines and one 4 inch
underground pipe line for 670 meters through GRC, Edible oil and
Star energy and modification of two existing 18 inch pipelines at
Berth#6 area to supply two loading arms.
• Client: Dubai Supply Authority (DUSUP).
• Project: IC to DGIC conversion project.
• Fabrication and installation of 16 inch pipe line and modification of
three compressors to change from inlet compressors to dry gas
injection compressors at Marghum area.
• Client: Petrofac.
• Project: Full Field Compression Project (FFC).
• Mechanical, E&I works and commissioning for installation of 16
compressors at 10 wellheads and 6 manifolds at AMOCO gas
station Sajaa industrial area sites.
Employer LEIGHTON OFF SHORE MIDDLE EAST (UAE)
Industry OIL AND GAS
Position PROJECT ENGINEER
From/To December 2010 to 2012
Description
Major Projects
1. EPC. (Engineering Procurement and Construction), revising all the
reports and data sheets provided by vendor or the client till the
approved final revision.
1. Working at PMT.
2. Mobilization of Pull Wire Lay Barge GTO186.
• Client: SOC (IRAQ).
• Project: Iraq Crude Oil Export Expansion Project (ICOEEP).
• Laying 120 km of 48” diameter pipe line on two lines each line consist of
10 km on shore and 50 km off shore to connect to beach valve station and
3 single points mooring.
Employer HYTORC EGYPT (Egytorc). (Hytorc agent for hydraulic torque wrench )
(EGYPT)
Industry ENGINEERING SERVICES (hydraulic torque wrench)
Position APPLICATION ENGINEER.
From/To January 2010 to 2010
Description
Major Projects
Service engineer for shut down projects , loosing and torqueing projects
in cements factories ,oil and gas industry ,wind stations etc. and sales
and technical support.
Employer THE INTERNATIONAL CENTER FOR ENGINEERING AGENCIES
(EGYPT)
Industry WELDING MACHINES, WELDING CONSUMABLE
Position TECHNICAL SUPPORT, SALES AND VISUAL WELDING INSPECTOR
PAGE 2 OF 3
3. From/To August 2009 to 2010
Description
Major Projects
Back up for the sales men and technical support for welding machines and
welding equipment and having my own clients and inspection for all the metal
welding done by the company welding wires and giving full reports about the
quality of the welding.
EDUCATION & SPECIAL QUALIFICATIONS
. Bachelor of Mechanical Engineering. Design & Production Department. Ain Shams
University.
Graduation year: 2009
Graduation Project:
Establishment of MRP system on unigear assembly line at ABB Company:
• Collecting all unigears components data to construct bill of material and product structure
tree,generating the master schedule, constructing the inventory records file.
• The implementation and operation of the MRP system required:
1 – The necessary software programs to finalize the analysis and maintain records.
2- Accurate and up-to-date:
a. Master schedules.
b. Bills of materials.
c. Inventory records.
Project Grade: Excellent
EXTRA COURSES
• PMP (project management professional) from PMI institute.
• DEVELOPING MANAGEMENT SKILLS from SPEAR HEAD training.
• CSWIB 3.1 visual welding inspector from TWI.
PERSONAL DETAILS
Full name: Ramy Emad Messeha Gerges.
Nationality: Egyptian.
Date of birth: 27/9/1985
Marital status: Married.
Military status: Exempted
Home: Cornech Khaldiya, Abu Dhabi, UAE
Phone No.: +971-24448877 - Mobile: +971-508101145.
E-mail: ramy_emad85@hotmail.com
Driving license: Valid UAE driving license, Valid Egyptian driving license.
PAGE 3 OF 3